Bump version to 8.6.0 and fix autotick bot and re-enable ppc64le

[conda-forge-admin]

Hi! This is the friendly automated conda-forge-webservice.

I've started rerendering the recipe as instructed in #63.

If I find any needed changes to the recipe, I'll push them to this PR shortly. Thank you for waiting!

Here's a checklist to do before merging.

• Bump the build number if needed

Fixes #63

[conda-forge-webservices]

Hi! This is the friendly automated conda-forge-linting service.

I wanted to let you know that I linted all conda-recipes in your PR (recipe/meta.yaml) and found some lint.

Here's what I've got...

For recipe/meta.yaml:

• This recipe is using a compiler, which now requires adding a build dependence on {{ stdlib("c") }} as well. Note that this rule applies to each output of the recipe using a compiler. For further details, please see META: {{ stdlib("c") }} migration conda-forge.github.io#2102.

For recipe/meta.yaml:

• No valid build backend found for Python recipe for package libgz-sim8 using pip. Python recipes using pip need to explicitly specify a build backend in the host section. If your recipe has built with only pip in the host section in the past, you likely should add setuptools to the host section of your recipe.
• No valid build backend found for Python recipe for package gz-sim8-python using pip. Python recipes using pip need to explicitly specify a build backend in the host section. If your recipe has built with only pip in the host section in the past, you likely should add setuptools to the host section of your recipe.

[conda-forge-webservices]

Hi! This is the friendly automated conda-forge-linting service.

I just wanted to let you know that I linted all conda-recipes in your PR (recipe/meta.yaml) and found it was in an excellent condition.

[traversaro]

@conda-forge-admin please rerender

[github-actions]

Hi! This is the friendly conda-forge automerge bot!

Commits were made to this PR after the automerge label was added. For security reasons, I have disabled automerge by removing the automerge label. Please add the automerge label again (or ask a maintainer to do so) if you'd like to enable automerge again!

[traversaro]

I guess the missing update affects also other feedstocks:

CMake Warning at /home/conda/feedstock_root/build_artifacts/gz-sim8_1724497848809/_h_env_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_pla/share/cmake/gz-cmake3/cmake3/GzFindPackage.cmake:243 (find_package):
  Could not find a configuration file for package "gz-sensors8" that is
  compatible with requested version "8.2.0".

  The following configuration files were considered but not accepted:

    /home/conda/feedstock_root/build_artifacts/gz-sim8_1724497848809/_h_env_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_pla/lib/cmake/gz-sensors8/gz-sensors8-config.cmake, version: 8.1.0

Call Stack (most recent call first):
  CMakeLists.txt:139 (gz_find_package)

[traversaro]

@conda-forge-admin please re-render

[github-actions]

Hi! This is the friendly automated conda-forge-webservice.

I tried to rerender for you, but it looks like there was nothing to do.

This message was generated by GitHub actions workflow run https://github.com/conda-forge/gz-sim-feedstock/actions/runs/10545370640.

[traversaro]

xref: conda-forge/gz-common-feedstock#34

[github-actions]

Hi! This is the friendly conda-forge automerge bot!

I considered the following status checks when analyzing this PR:

• linter: passed
• azure: failed

Thus the PR was not passing and not merged.

[traversaro]

@conda-forge-admin please re-render

[github-actions]

Hi! This is the friendly automated conda-forge-webservice.

I tried to rerender for you, but it looks like there was nothing to do.

This message was generated by GitHub actions workflow run https://github.com/conda-forge/gz-sim-feedstock/actions/runs/11069099221.

[github-actions]

Hi! This is the friendly conda-forge automerge bot!

Commits were made to this PR after the automerge label was added. For security reasons, I have disabled automerge by removing the automerge label. Please add the automerge label again (or ask a maintainer to do so) if you'd like to enable automerge again!

[traversaro]

This fails with:

conda_libmamba_solver.conda_build_exceptions.ExplainedDependencyNeedsBuildingError: Unsatisfiable dependencies for platform linux-64: {MatchSpec("libgz-physics7[version='>=7.3.0,<8.0a0']"), MatchSpec("libgz-sim8==8.6.0=hb8131cb_0")}
Encountered problems while solving:
  - package libgz-sim8-8.6.0-hb8131cb_0 requires libgz-physics7 >=7.3.0,<8.0a0, but none of the providers can be installed

Could not solve for environment specs
The following packages are incompatible
├─ assimp 5.4.3.* h8943939_0 is requested and can be installed;
└─ libgz-sim8 8.6.0.* hb8131cb_0 is not installable because it requires
   └─ libgz-physics7 >=7.3.0,<8.0a0 , which requires
      └─ assimp >=5.4.2,<5.4.3.0a0 , which conflicts with any installable versions previously reported.

That is due to conda-forge/dartsim-feedstock#97 .

[traversaro]

@conda-forge-admin please rerender

[github-actions]

Hi! This is the friendly automated conda-forge-webservice.

I tried to rerender for you, but it looks like there was nothing to do.

_{This message was generated by GitHub actions workflow run https://github.com/conda-forge/gz-sim-feedstock/actions/runs/11096150737.}

[traversaro]

Dependency error:

Could not solve for environment specs
The following packages are incompatible
\u251c\u2500 assimp 5.4.3.* hf1e84b2_0 is requested and can be installed;
\u251c\u2500 libboost 1.86.0.* h444863b_2 is requested and can be installed;
\u251c\u2500 libgz-sim8 8.6.0.* h2eda7d2_0 is installable and it requires
\u2502  \u2514\u2500 libgz-physics7 >=7.3.0,<8.0a0  with the potential options
\u2502     \u251c\u2500 libgz-physics7 7.3.0 would require
\u2502     \u2502  \u2514\u2500 assimp >=5.4.2,<5.4.3.0a0 , which conflicts with any installable versions previously reported;
\u2502     \u2514\u2500 libgz-physics7 7.3.0 would require
\u2502        \u2514\u2500 dartsim-cpp >=6.14.5,<6.15.0a0  with the potential options
\u2502           \u251c\u2500 dartsim-cpp 6.14.5 would require
\u2502           \u2502  \u2514\u2500 assimp >=5.4.2,<5.4.3.0a0 , which conflicts with any installable versions previously reported;
\u2502           \u2514\u2500 dartsim-cpp 6.14.5 would require
\u2502              \u2514\u2500 pagmo >=2.19.1,<2.20.0a0  with the potential options
\u2502                 \u251c\u2500 pagmo 2.19.1 would require
\u2502                 \u2502  \u2514\u2500 tbb [>=2021.12.0 |>=2021.13.0 ], which requires
\u2502                 \u2502     \u2514\u2500 libhwloc [>=2.10.0,<2.10.1.0a0 |>=2.11.0,<2.11.1.0a0 |>=2.11.1,<2.11.2.0a0 ], which requires
\u2502                 \u2502        \u2514\u2500 pthreads-win32 with the potential options
\u2502                 \u2502           \u251c\u2500 pthreads-win32 2.9.1 would require
\u2502                 \u2502           \u2502  \u2514\u2500 vc 9.* , which does not exist (perhaps a missing channel);
\u2502                 \u2502           \u251c\u2500 pthreads-win32 2.9.1, which can be installed;
\u2502                 \u2502           \u2514\u2500 pthreads-win32 2.9.1 would require
\u2502                 \u2502              \u2514\u2500 vc 10.* , which does not exist (perhaps a missing channel);
\u2502                 \u2514\u2500 pagmo 2.19.1 would require
\u2502                    \u2514\u2500 libboost >=1.84.0,<1.85.0a0 , which conflicts with any installable versions previously reported;
\u2514\u2500 libwinpthread 12.0.0.r4.gg4f2fc60ca h57928b3_8 is not installable because it requires
   \u2514\u2500 pthreads-win32 <0.0a0 , which conflicts with any installable versions previously reported.

[traversaro]

This is because the latest dartsim can't be installed on windows as dartpy is missing (see conda-forge/dartsim-feedstock#95). Switching to depending on dartsim-cpp should fix hte issue.

[traversaro]

This is because the latest dartsim can't be installed on windows as dartpy is missing (see conda-forge/dartsim-feedstock#95). Switching to depending on dartsim-cpp should fix hte issue.

The issue is not that one, it is something else as gz-physics already depends on dartsim-cpp .

[traversaro]

@conda-forge-admin please rerender

[github-actions]

Hi! This is the friendly automated conda-forge-webservice.

I tried to rerender for you, but it looks like there was nothing to do.

_{This message was generated by GitHub actions workflow run https://github.com/conda-forge/gz-sim-feedstock/actions/runs/11104587731.}