Add support for Idobao Montex

keyboards/montex/info.json

@@ -0,0 +1,47 @@
+{
+    "keyboard_name": "montex numpad",
+    "url": "https://www.idobao.net/products/ldobao-montex-pad-hot-swappable-mechanical-keyboard-kit",
+    "maintainer": "NachoxMacho",
+    "width": 5,
+    "height": 6,
+    "layouts": {
+        "LAYOUT_numpad_6x5": {
+            "layout": [
+                { "label": "0,0", "x": 0, "y": 0},
+                { "label": "0,1", "x": 1, "y": 0},
+                { "label": "0,2", "x": 2, "y": 0},
+                { "label": "0,3", "x": 3, "y": 0},
+                { "label": "0,4", "x": 4, "y": 0},
+
+                { "label": "1,0", "x": 0, "y": 1.25},
+                { "label": "1,1", "x": 1, "y": 1.25},
+                { "label": "1,2", "x": 2, "y": 1.25},
+                { "label": "1,3", "x": 3, "y": 1.25},
+                { "label": "1,4", "x": 4, "y": 1.25},
+
+                { "label": "2,0", "x": 0, "y": 2.25},
+                { "label": "2,1", "x": 1, "y": 2.25},
+                { "label": "2,2", "x": 2, "y": 2.25},
+                { "label": "2,3", "x": 3, "y": 2.25},
+
+                { "label": "3,0", "x": 0, "y": 3.25},
+                { "label": "3,1", "x": 1, "y": 3.25},
+                { "label": "3,2", "x": 2, "y": 3.25},
+                { "label": "3,3", "x": 3, "y": 3.25},
+                { "label": "3,4", "x": 4, "y": 2.25, "h": 2},
+
+                { "label": "4,0", "x": 0, "y": 4.25},
+                { "label": "4,1", "x": 1, "y": 4.25},
+                { "label": "4,2", "x": 2, "y": 4.25},
+                { "label": "4,3", "x": 3, "y": 4.25},
+
+                { "label": "5,0", "x": 0, "y": 5.25},
+                { "label": "5,1", "x": 1, "y": 5.25, "w": 2},                
+                { "label": "5,3", "x": 3, "y": 5.25},
+                { "label": "5,4", "x": 4, "y": 4.25, "h": 2}
+
+            ]
+        }
+    }
+  }
+

keyboards/montex/keymaps/default/config.h

@@ -0,0 +1,52 @@
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 5
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D4, D6, D7, B4, B5, C6 }
+#define MATRIX_COL_PINS { D5, D3, D2, D1, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN B1
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 4
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif

keyboards/montex/keymaps/default/keymap.c

@@ -0,0 +1,51 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /*
+     * ┌───┌───┬───┬───┬───┐
+     * │ ` │Esc│Tab│MO1│Bsp│
+     * ├───┼───┼───┼───┼───┤
+     * │ , │Num│ / │ * │ - │
+     * ├───┼───┼───┼───┼───┤
+     * │Gui│ 7 │ 8 │ 9 │   │
+     * ├───┼───┼───┼───┤ + │
+     * │Alt│ 4 │ 5 │ 6 │   │
+     * ├───┼───┼───┼───┼───┤
+     * │Shi│ 1 │ 2 │ 3 │   │
+     * ├───┼───┴───┼───┤Ent│
+     * │Ctr│ 0     │ . │   │
+     * └───┴───────┴───┴───┘
+     */
+    [0] = LAYOUT_numpad_6x5(
+        KC_GRAVE,  KC_ESC,  KC_TAB,  MO(1),   KC_BSPC,
+        KC_COMMA,  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_LGUI,   KC_P7,   KC_P8,   KC_P9,
+        KC_LALT,   KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_LSHIFT, KC_P1,   KC_P2,   KC_P3,
+        KC_LCTRL,  KC_P0,            KC_PDOT, KC_PENT
+    ),
+
+    /*
+     * ┌───┌───┐───┬───┬───┐
+     * │ ` │Rst│Tab│MO1│Bsp│
+     * ├───┼───┘───┼───┼───┤
+     * │ , │Num│ / │ * │ - │
+     * ├───┼───┼───┼───┼───┤
+     * │Gui│Hom│ ↑ │PgU│   │
+     * ├───┼───┼───┼───┤ + │
+     * │Alt│ ← │   │ → │   │
+     * ├───┼───┼───┼───┤───┤
+     * │Shi│End│ ↓ │PgD│   │
+     * ├───┼───┴───┼───┤Ent│
+     * │Ctr│Insert │Del│   │
+     * └───┴───────┴───┘───┘
+     */
+    [1] = LAYOUT_numpad_6x5(
+        _______, RESET,   _______, _______, _______,
+        _______, _______, _______, _______, _______,
+        _______, KC_HOME, KC_UP,   KC_PGUP,
+        _______, KC_LEFT, XXXXXXX, KC_RGHT, _______,
+        _______, KC_END,  KC_DOWN, KC_PGDN,
+        _______, KC_INS,           KC_DEL,  _______
+    )
+};

keyboards/montex/montex.c

@@ -0,0 +1,8 @@
+#include "montex.h"
+
+void keyboard_pre_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}

keyboards/montex/montex.h

@@ -0,0 +1,19 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_numpad_6x5( \
+	K00, K01, K02, K03, K04, \
+	K10, K11, K12, K13, K14, \
+	K20, K21, K22, K23, K24, \
+	K30, K31, K32, K33,      \
+	K40, K41, K42, K43,      \
+	K50, K51, K52, K53  \
+) { \
+	{ K00,   K01,   K02,   K03,   K04 }, \
+	{ K10,   K11,   K12,   K13,   K14 }, \
+	{ K20,   K21,   K22,   K23,   K24 }, \
+	{ K30,   K31,   K32,   K33,   KC_NO }, \
+	{ K40,   K41,   K42,   K43,   KC_NO }, \
+	{ K50,   K51,   K52,   K53,   KC_NO }  \
+}

keyboards/montex/readme.md

@@ -0,0 +1,15 @@
+# IDOBAO MONTEX
+
+A hotswap numpad from IDOBAO.
+
+## Support:
+
+* Keyboard Maintainer: [NachoxMacho](https://github.com/NachoxMacho)
+* Hardware Supported: IDOBAO MONTEX
+* Hardware Availability: [IDOBAO](https://www.idobao.net/products/ldobao-montex-pad-hot-swappable-mechanical-keyboard-kit)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make montex:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/montex/rules.mk

@@ -0,0 +1,56 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+CONSOLE_ENABLE ?= no	# Console for debug(+400)
+COMMAND_ENABLE ?= no    # Commands for debug and configuration
+SLEEP_LED_ENABLE ?= no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE ?= yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE ?= no
+RGBLIGHT_ENABLE ?= yes

layouts/default/numpad_6x5/default_numpad_6x5/keymap.c

@@ -0,0 +1,51 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /*
+     * ┌───┌───┬───┬───┬───┐
+     * │ ` │Esc│Tab│MO1│Bsp│
+     * ├───┼───┼───┼───┼───┤
+     * │ , │Num│ / │ * │ - │
+     * ├───┼───┼───┼───┼───┤
+     * │Gui│ 7 │ 8 │ 9 │   │
+     * ├───┼───┼───┼───┤ + │
+     * │Alt│ 4 │ 5 │ 6 │   │
+     * ├───┼───┼───┼───┼───┤
+     * │Shi│ 1 │ 2 │ 3 │   │
+     * ├───┼───┴───┼───┤Ent│
+     * │Ctr│ 0     │ . │   │
+     * └───┴───────┴───┴───┘
+     */
+    [0] = LAYOUT_numpad_6x5(
+        KC_GRAVE,  KC_ESC,  KC_TAB,  MO(1),   KC_BSPC,
+        KC_COMMA,  KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_LGUI,   KC_P7,   KC_P8,   KC_P9,
+        KC_LALT,   KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_LSHIFT, KC_P1,   KC_P2,   KC_P3,
+        KC_LCTRL,  KC_P0,            KC_PDOT, KC_PENT
+    ),
+
+    /*
+     * ┌───┌───┐───┬───┬───┐
+     * │ ` │Rst│Tab│MO1│Bsp│
+     * ├───┼───┘───┼───┼───┤
+     * │ , │Num│ / │ * │ - │
+     * ├───┼───┼───┼───┼───┤
+     * │Gui│Hom│ ↑ │PgU│   │
+     * ├───┼───┼───┼───┤ + │
+     * │Alt│ ← │   │ → │   │
+     * ├───┼───┼───┼───┤───┤
+     * │Shi│End│ ↓ │PgD│   │
+     * ├───┼───┴───┼───┤Ent│
+     * │Ctr│Insert │Del│   │
+     * └───┴───────┴───┘───┘
+     */
+    [1] = LAYOUT_numpad_6x5(
+        _______, RESET,   _______, _______, _______,
+        _______, _______, _______, _______, _______,
+        _______, KC_HOME, KC_UP,   KC_PGUP,
+        _______, KC_LEFT, XXXXXXX, KC_RGHT, _______,
+        _______, KC_END,  KC_DOWN, KC_PGDN,
+        _______, KC_INS,           KC_DEL,  _______
+    )
+};

layouts/default/numpad_6x5/info.json

@@ -0,0 +1,45 @@
+{
+    "keyboard_name": "6x5 number pad layout",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 5,
+    "height": 6,
+    "layouts": {
+        "LAYOUT_numpad_6x5": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+
+                {"x":0, "y":1},
+                {"x":1, "y":1},
+                {"x":2, "y":1},
+                {"x":3, "y":1},
+                {"x":4, "y":1},
+
+                {"x":0, "y":2},
+                {"x":1, "y":2},
+                {"x":2, "y":2},
+                {"x":3, "y":2},
+
+                {"x":0, "y":3},
+                {"x":1, "y":3},
+                {"x":2, "y":3},
+                {"x":3, "y":3},
+                {"x":4, "y":2, "h":2},
+
+                {"x":0, "y":4},
+                {"x":1, "y":4},
+                {"x":2, "y":4},
+                {"x":3, "y":4},
+
+                {"x":0, "y":5},
+                {"x":1, "y":5, "w":2},
+                {"x":3, "y":5},
+                {"x":4, "y":4, "h":2}
+            ]
+        }
+    }
+}

layouts/default/numpad_6x5/layout.json

@@ -0,0 +1,6 @@
+[{a:7},"","","","",""],
+["","","","",""],
+["","","","",{h:2},""],
+["","","",""],
+["","","","",{h:2},""],
+["",{w:2},"",""]

layouts/default/numpad_6x5/readme.md

@@ -0,0 +1,3 @@
+# numpad_6x5
+
+    LAYOUT_numpad_6x5