Drivers used in nano-gui, micro-gui and micropython-touch are identical. These displays and drivers are also compatible with the Writer class.
Note that most ePaper/eInk displays are unsuitable for interactive use owing to their long update time. The one exception is the Waveshare pico 4.2 inch which is quick enough to work with micro-gui.
Size is diagonal in inches. C/M/GS color/1-bit monochrome/greyscale.
Displays with a touch overlay are denoted by T, K, R or S depending on the touch
hardware. See Touch Displays below.
Width and height are pixels.
| Size | Width | Height | Tech | Driver | Description | Notes |
|---|---|---|---|---|---|---|
| 0.96C | 94 | 64 | OLED | SSD1331 | Adafruit 684 | |
| 1.12GS | 96 | 96 | OLED | SSD1327 | Seeed 104030011 | Obsolescent. |
| 1.27C | 128 | 96 | OLED | SSD1351 | Adafruit 1673 | |
| 1.5C | 128 | 128 | OLED | SSD1351 | Adafruit 1431 | |
| 1.4M | 128 | 64 | LCD | SSD7567s | ST7567s | Similar to SSD1306 |
| 1.44C | 128 | 128 | TFT | ST7735R | Adafruit 2088 | |
| 1.5C | 160 | 128 | TFT | ST7735R | Adafruit 358 | |
| 1.3C | 240 | 240 | TFT | ST7789 | Adafruit 4313 | |
| 1.28C Q | 240 | 240 | TFT | GC9A01 | W'share 1.28 touch LCD | Round touch display |
| 1.28C Q | 240 | 240 | TFT | GC9A01 | W'share 1.28 touch LCD | Round touch display with embedded RP2 chip |
| 1.5GS | 128 | 128 | OLED | SSD1327 | Waveshare 13992 | |
| 2.0C | 320 | 240 | TFT | ST7789 | Waveshare Pico LCD 2 | For Pi Pico. |
| 1.54C | 240 | 240 | TFT | ST7789 | Adafruit 3787 | |
| 1.14C | 240 | 135 | TFT | ST7789 | T-Display | ESP32 with attached display. |
| 2.8C K | 240 | 320 | TFT | ILI9341 | Adafruit touch shield | Arduino shield format capacitive touch. |
| 2.8C T | 320 | 240 | TFT | ST7789 | Waveshare pico 2.8 | Display for Pi Pico. (Touch support). |
| 1.14C | 240 | 135 | TFT | ST7789 | Waveshare pico 1.14 | For Pi Pico. Buttons good for micro-gui. |
| 1.14C | 240 | 135 | TFT | ST7789 | Pimoroni pico 1.14 | For Pi Pico. Buttons good for micro-gui. |
| 1.47C | 320 | 172 | TFT | ST7789 | DFR0995 | |
| 1.3C | 240 | 240 | TFT | ST7789 | Waveshare Pico 1.3 | |
| 1.9C | 320 | 170 | TFT | ST7789 | Adafruit 5395 | |
| 3.2C S | 320 | 240 | TFT | ILI9341 | ESP32-2432S024C | Cheap yellow display 3.2" capacitive touch |
| 3.2C R | 320 | 240 | TFT | ILI9341 | Adafruit 1743 | Big touch unit. eBay equivalents work here. |
| 3.5C T | 480 | 320 | TFT | ILI9486 | Waveshare Rpi 3.5 LCD | Pi HAT. Many pixels. Needs plenty of RAM. |
| 3.5C R | 480 | 320 | TFT | ILI9486 | Adafruit 3.5 LCD | 3.5" HX8357D touch, notes as above. |
| 3.5C T | 480 | 320 | TFT | ILI9486 | Waveshare Pico 3.5 | 3.5" Pico ILI9488 (touch). |
| 2.9M | 296 | 128 | eInk | UC8151D | Adafruit 4262 | Flexible ePaper display. |
| 2.9M | 296 | 128 | eInk | UC8151D | Adafruit 4777 | FeatherWing ePaper display. |
| 2.9M | 296 | 128 | eInk | SSD1680 | WeAct Studio ePaper | WeAct Studio ePaper display. |
| 4.2M | 400 | 300 | eInk | WS | Waveshare pico 4.2 | Pico plugs in, others via cable see. |
| 2.7M | 274 | 176 | eInk | HAT | Waveshare HAT | HAT designed for Raspberry Pi, repurposed. |
| 2.7M | 400 | 240 | Sharp | Sharp | Adafruit 4694 | Micropower monochrome display. |
| 1.3M | 168 | 144 | Sharp | Sharp | Adafruit 3502 | Ditto. |
Monochrome OLED displays based on the SSD1306 chip are supported via the official driver. Displays are available from various sources and can use I2C or SPI interfaces. An example is Adafruit 938. The SSD1306 driver in this repo has minor additions to support demos intended for color displays.
Monochrome OLED displays based on the SH1106 chip are supported via the unofficial driver. The SH1106 driver in this repo has minor additions to support demos intended for color displays. Displays are available from various sources and can use I2C or SPI interfaces. An exmaple is the Inland IIC SPI 1.3" 128x64 OLED V2.0 AKA KeyStudio.
Nokia 5110 (PCD8544) displays. This driver is compatible.
Waveshare have published drivers for their other products, claiming nano-gui
compatibility. Lacking the relevant hardware I am not in a position to assess or
support these but feel free to use them. They have re-published nano-gui which
they are entitled to do, but their copy may not include the latest bugfixes or
enhancements.
The following drivers were contributed by users. I am unable to support these as I don't possess the relevant hardware. SSD7567s contributed by EnricoRoss98 PR SSD1680.py contributed by EnricoRoss98 PR
See these notes for wiring details, pin names and hardware issues.
An untested display that uses a supported controller is not guaranteed to work. This is because a controller can be connected to the display in a variety of ways. In some cases the existing driver can be persuaded to work, sometimes by using nonstandard constructor arguments. In other cases the driver itself needs to be adapted.
For an unlisted controller the first step is to see if there is an existing driver that can be ported. Adafruit publish CircuitPython drivers for their hardware: these are easy to port to MicroPython. Only a minimal subset is needed to support these GUI's, with the result that the drivers can be very simple. See this doc for details.
| Label | Controller | Comments |
|---|---|---|
| R | TSC2007 | Resistive touch needs external controller |
| T | XPT2046 | Resistive touch, XPT2046 controller. |
| K | FT6206 | Capacitive touch controller. |
| Q | CST816S | Capacitive touch controller. |
| S | CST820 | Capacitive touch controller. |