Documentation - allow long lines for tables and code blocks

.markdownlint.yaml

@@ -0,0 +1,7 @@
+# Default state for all rules
+default: true
+
+# allow long lines for tables and code blocks
+MD013:
+  code_blocks: false
+  tables: false

CONTRIBUTING.md

@@ -76,14 +76,12 @@ helper methods.
    in each framework that you target.
 * Add the following lines to your csproj:
 
-<!-- markdownlint-disable MD013 -->
 ```xml
 <ItemGroup>
   <AdditionalFiles Include=".publicApi\$(TargetFramework)\PublicAPI.Shipped.txt" />
   <AdditionalFiles Include=".publicApi\$(TargetFramework)\PublicAPI.Unshipped.txt" />
 </ItemGroup>
 ```
-<!-- markdownlint-enable MD013 -->
 
 * Use
    [IntelliSense](https://docs.microsoft.com/visualstudio/ide/using-intellisense)

docs/metrics/customizing-the-sdk/README.md

@@ -241,7 +241,6 @@ are then aggregated using the custom boundaries provided instead of the the
 default boundaries. This requires the use of
 `ExplicitBucketHistogramConfiguration`.
 
-<!-- markdownlint-disable MD013 -->
 ```csharp
     // Change Histogram boundaries to count measurements under the following buckets:
     // (-inf, 10]
@@ -258,7 +257,6 @@ default boundaries. This requires the use of
         instrumentName: "MyHistogram",
         new ExplicitBucketHistogramConfiguration { Boundaries = new double[] { } })
 ```
-<!-- markdownlint-enable MD013 -->
 
 ```csharp
     // Advanced selection criteria and config via Func<Instrument, MetricStreamConfiguration>
@@ -343,7 +341,6 @@ There are two total `MetricStream`s created one for each of these instruments.
 SDK will limit the maximum number of distinct key/value combinations for each of
 these `MetricStream`s to `3`.
 
-<!-- markdownlint-disable MD013 -->
 ```csharp
 using System.Collections.Generic;
 using System.Diagnostics.Metrics;
@@ -397,7 +394,6 @@ AnotherFruitCounter.Add(2, new("name", "banana"), new("color", "green")); // Not
 AnotherFruitCounter.Add(5, new("name", "banana"), new("color", "yellow")); // Exported
 AnotherFruitCounter.Add(4, new("name", "mango"), new("color", "yellow")); // Not exported
 ```
-<!-- markdownlint-enable MD013 -->
 
 **NOTE:** The above limit is *per* metric stream, and applies to all the metric
 streams. There is no ability to apply different limits for each instrument at

docs/metrics/getting-started/README.md

@@ -31,7 +31,6 @@ Run the application again (using `dotnet run`) and you should see the metric
 output from the console (metrics will be seen once the program ends),
 similar to shown below:
 
-<!-- markdownlint-disable MD013 -->
 ```text
 Export MyFruitCounter, Meter: MyCompany.MyProduct.MyLibrary/1.0
 (2021-09-23T22:00:08.4399776Z, 2021-09-23T22:00:08.4510115Z] color:red name:apple LongSum
@@ -41,7 +40,6 @@ Value: 7
 (2021-09-23T22:00:08.4399776Z, 2021-09-23T22:00:08.4510115Z] color:green name:apple LongSum
 Value: 2
 ```
-<!-- markdownlint-enable MD013 -->
 
 Congratulations! You are now collecting metrics using OpenTelemetry.
 

docs/trace/reporting-exceptions/README.md

@@ -145,7 +145,6 @@ one possible way of doing this:
 **WARNING:** Use `AppDomain.UnhandledException` with caution. A throw in the
 handler puts the process into an unrecoverable state.
 
-<!-- markdownlint-disable MD013 -->
 ```csharp
 using System;
 using System.Diagnostics;
@@ -191,4 +190,3 @@ public class Program
     }
 }
 ```
-<!-- markdownlint-enable MD013 -->

src/OpenTelemetry.Api/README.md

@@ -460,13 +460,11 @@ for versions lower than `.NET Framework 4.6.1`.
 1. Install the `System.Diagnostics.DiagnosticSource` package version
    `6.0.0` or above to your application or library.
 
-    <!-- markdownlint-disable MD013 -->
     ```xml
     <ItemGroup>
       <PackageReference Include="System.Diagnostics.DiagnosticSource" Version="6.0.0" />
     </ItemGroup>
     ```
-    <!-- markdownlint-enable MD013 -->
 
 2. Create a `Meter`, providing the name and version of the library/application
    doing the instrumentation. The `Meter` instance is typically created once and

src/OpenTelemetry.Exporter.Jaeger/README.md

@@ -78,14 +78,12 @@ The following environment variables can be used to override the default
 values of the `JaegerExporterOptions`
 (following the [OpenTelemetry specification](https://github.com/open-telemetry/opentelemetry-specification/blob/main/specification/sdk-environment-variables.md#jaeger-exporter)).
 
-  <!-- markdownlint-disable MD013 -->
 | Environment variable              | `JaegerExporterOptions` property                          |
 |-----------------------------------|-----------------------------------------------------------|
 | `OTEL_EXPORTER_JAEGER_AGENT_HOST` | `AgentHost`                                               |
 | `OTEL_EXPORTER_JAEGER_AGENT_PORT` | `AgentPort`                                               |
 | `OTEL_EXPORTER_JAEGER_ENDPOINT`   | `Endpoint`                                                |
 | `OTEL_EXPORTER_JAEGER_PROTOCOL`   | `Protocol` (`udp/thrift.compact` or `http/thrift.binary`) |
-  <!-- markdownlint-enable MD013 -->
 
 `FormatException` is thrown in case of an invalid value for any of the
 supported environment variables.

src/OpenTelemetry/README.md

@@ -206,14 +206,12 @@ purposes, the SDK provides the following built-in processors:
   The following environment variables can be used to override the default
   values of the `BatchExportActivityProcessorOptions`.
 
-  <!-- markdownlint-disable MD013 -->
   | Environment variable             | `BatchExportActivityProcessorOptions` property |
   | -------------------------------- | ---------------------------------------------- |
   | `OTEL_BSP_SCHEDULE_DELAY`        | `ScheduledDelayMilliseconds`                   |
   | `OTEL_BSP_EXPORT_TIMEOUT`        | `ExporterTimeoutMilliseconds`                  |
   | `OTEL_BSP_MAX_QUEUE_SIZE`        | `MaxQueueSize`                                 |
   | `OTEL_BSP_MAX_EXPORT_BATCH_SIZE` | `MaxExportBatchSizeEnvVarKey`                  |
-  <!-- markdownlint-enable MD013 -->
 
   `FormatException` is thrown in case of an invalid value for any of the
   supported environment variables.
@@ -265,12 +263,10 @@ using var tracerProvider = Sdk.CreateTracerProviderBuilder()
 It is also possible to configure the `Resource` by using following
 environmental variables:
 
-<!-- markdownlint-disable MD013 -->
 | Environment variable       | Description                                        |
 | -------------------------- | -------------------------------------------------- |
 | `OTEL_RESOURCE_ATTRIBUTES` | Key-value pairs to be used as resource attributes. See the [Resource SDK specification](https://github.com/open-telemetry/opentelemetry-specification/blob/v1.5.0/specification/resource/sdk.md#specifying-resource-information-via-an-environment-variable) for more details. |
 | `OTEL_SERVICE_NAME`        | Sets the value of the `service.name` resource attribute. If `service.name` is also provided in `OTEL_RESOURCE_ATTRIBUTES`, then `OTEL_SERVICE_NAME` takes precedence. |
-<!-- markdownlint-enable MD013 -->
 
 ### Sampler
 

test/Benchmarks/README.md

@@ -5,8 +5,6 @@ Use the following example to run Benchmarks from command line:
 
 Navigate to `./test/Benchmarks` directory and run the following command:
 
-<!-- markdownlint-disable MD013 -->
 ```sh
 dotnet run --framework net6.0 --configuration Release --filter *TraceBenchmarks*
 ```
-<!-- markdownlint-enable MD013 -->

test/OpenTelemetry.Tests.Stress/README.md

@@ -30,7 +30,6 @@ Use the `ENTER` key to print the latest performance statistics.
 
 Use the `ESC` key to exit the stress test.
 
-<!-- markdownlint-disable MD013 -->
 ```text
 Running (concurrency = 1), press <Esc> to stop...
 2021-09-28T18:47:17.6807622Z Loops: 17,549,732,467, Loops/Second: 738,682,519, CPU Cycles/Loop: 3
@@ -40,7 +39,6 @@ Running (concurrency = 1), press <Esc> to stop...
 2021-09-28T18:47:18.5052989Z Loops: 18,150,598,194, Loops/Second: 733,026,161, CPU Cycles/Loop: 3
 2021-09-28T18:47:18.7116733Z Loops: 18,299,461,007, Loops/Second: 724,950,210, CPU Cycles/Loop: 3
 ```
-<!-- markdownlint-enable MD013 -->
 
 The stress test metrics are exposed via
 [PrometheusExporter](../../src/OpenTelemetry.Exporter.Prometheus/README.md),