HLCDC stuff for linux-a91-3.18 #10

bbrezillon · 2015-02-12T13:09:06Z

Add HLCDC support for all at91 SoCs.
DT files are not all updated appropriately and PDA4 display module is not supported yet.

PDA7 + sama5d3xek has been tested.

Define the HLCDC (HLCD Controller) IP available on some sama5d3 SoCs (i.e. sama5d31, sama5d33, sama5d34 and sama5d36) in sama5d3 dtsi file. Signed-off-by: Boris Brezillon <[email protected]> Tested-by: Anthony Harivel <[email protected]>

Describe capabilities of the HLCDC IP found on at91sam9x5 SoCs and add a new entry to the atmel_hlcdc_of_match table. Signed-off-by: Boris Brezillon <[email protected]>

Add an entry in the atmel_hlcdc_match table to support the HLCDC IP available on at91sam9x5 SoCs Signed-off-by: Boris Brezillon <[email protected]>

Signed-off-by: Boris BREZILLON <[email protected]>

Describe capabilities of the HLCDC IP found on at91sam9n12 SoC and add a new entry to the atmel_hlcdc_of_match table. Signed-off-by: Boris Brezillon <[email protected]>

Add an entry in the atmel_hlcdc_match table to support the HLCDC IP available on at91sam9n12 SoC. Signed-off-by: Boris Brezillon <[email protected]>

Describe capabilities of the HLCDC IP found on sama5d4 SoCs and add a new entry to the atmel_hlcdc_of_match table. Signed-off-by: Boris Brezillon <[email protected]>

Add an entry in the atmel_hlcdc_match table to support the HLCDC IP available on sama5d4 SoCs. Signed-off-by: Boris Brezillon <[email protected]>

Rename lcd_clk into lcdc_clk to be consistent with sama5d3 clock definitions. Signed-off-by: Boris BREZILLON <[email protected]>

lcdck takes mck (not smd) as its parent. Signed-off-by: Boris BREZILLON <[email protected]>

Add LCDC pin definitions. Signed-off-by: Boris BREZILLON <[email protected]>

Add HLCDC node. Signed-off-by: Boris BREZILLON <[email protected]>

!!!! I'm not sure about the LCD panel properties, these values should be checked with atmel. Signed-off-by: Boris BREZILLON <[email protected]>

At the moment only the LCD panel is defined. Other components should be added later. Signed-off-by: Boris BREZILLON <[email protected]>

Include pda-tm7000 display module dtsi and enable the HLCDC and panel related devices. Signed-off-by: Boris BREZILLON <[email protected]>

The lcd_bus and hlcdc cannot be both defined at the same time because they are using the same resources. Remove old lcb_bus node and then enable the hlcdc node. Signed-off-by: Boris BREZILLON <[email protected]>

Signed-off-by: Boris Brezillon <[email protected]>

commit d269d44 upstream. The USB console currently allocates a temporary fake tty which is used to pass terminal settings to the underlying serial driver. The tty struct is not fully initialised, something which can lead to a lockdep warning (or worse) if a serial driver tries to acquire a line-discipline reference: usbserial: USB Serial support registered for pl2303 pl2303 1-2.1:1.0: pl2303 converter detected usb 1-2.1: pl2303 converter now attached to ttyUSB0 INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 68 Comm: udevd Tainted: G W 3.18.0-rc5 linux4sam#10 [<c0016f04>] (unwind_backtrace) from [<c0013978>] (show_stack+0x20/0x24) [<c0013978>] (show_stack) from [<c0449794>] (dump_stack+0x24/0x28) [<c0449794>] (dump_stack) from [<c006f730>] (__lock_acquire+0x1e50/0x2004) [<c006f730>] (__lock_acquire) from [<c0070128>] (lock_acquire+0xe4/0x18c) [<c0070128>] (lock_acquire) from [<c027c6f8>] (ldsem_down_read_trylock+0x78/0x90) [<c027c6f8>] (ldsem_down_read_trylock) from [<c027a1cc>] (tty_ldisc_ref+0x24/0x58) [<c027a1cc>] (tty_ldisc_ref) from [<c0340760>] (usb_serial_handle_dcd_change+0x48/0xe8) [<c0340760>] (usb_serial_handle_dcd_change) from [<bf000484>] (pl2303_read_int_callback+0x210/0x220 [pl2303]) [<bf000484>] (pl2303_read_int_callback [pl2303]) from [<c031624c>] (__usb_hcd_giveback_urb+0x80/0x140) [<c031624c>] (__usb_hcd_giveback_urb) from [<c0316fc0>] (usb_giveback_urb_bh+0x98/0xd4) [<c0316fc0>] (usb_giveback_urb_bh) from [<c0042e44>] (tasklet_hi_action+0x9c/0x108) [<c0042e44>] (tasklet_hi_action) from [<c0042380>] (__do_softirq+0x148/0x42c) [<c0042380>] (__do_softirq) from [<c00429cc>] (irq_exit+0xd8/0x114) [<c00429cc>] (irq_exit) from [<c007ae58>] (__handle_domain_irq+0x84/0xdc) [<c007ae58>] (__handle_domain_irq) from [<c000879c>] (omap_intc_handle_irq+0xd8/0xe0) [<c000879c>] (omap_intc_handle_irq) from [<c0014544>] (__irq_svc+0x44/0x7c) Exception stack(0xdf4e7f08 to 0xdf4e7f50) 7f00: debc0b80 df4e7f5c 00000000 00000000 debc0b80 be8da96c 7f20: 00000000 00000128 c000fc84 df4e6000 00000000 df4e7f94 00000004 df4e7f50 7f40: c038ebc0 c038d74c 600f0013 ffffffff [<c0014544>] (__irq_svc) from [<c038d74c>] (___sys_sendmsg.part.29+0x0/0x2e0) [<c038d74c>] (___sys_sendmsg.part.29) from [<c038ec08>] (SyS_sendmsg+0x18/0x1c) [<c038ec08>] (SyS_sendmsg) from [<c000fa00>] (ret_fast_syscall+0x0/0x48) console [ttyUSB0] enabled Fixes: 3669752 ("tty: Replace ldisc locking with ldisc_sem") Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

noglitch · 2015-05-13T16:44:01Z

driver taken from your sources outside of this PR: I close it.

Thanks

[ Upstream commit 45caeaa ] As Eric Dumazet pointed out this also needs to be fixed in IPv6. v2: Contains the IPv6 tcp/Ipv6 dccp patches as well. We have seen a few incidents lately where a dst_enty has been freed with a dangling TCP socket reference (sk->sk_dst_cache) pointing to that dst_entry. If the conditions/timings are right a crash then ensues when the freed dst_entry is referenced later on. A Common crashing back trace is: #8 [] page_fault at ffffffff8163e648 [exception RIP: __tcp_ack_snd_check+74] . . #9 [] tcp_rcv_established at ffffffff81580b64 #10 [] tcp_v4_do_rcv at ffffffff8158b54a #11 [] tcp_v4_rcv at ffffffff8158cd02 #12 [] ip_local_deliver_finish at ffffffff815668f4 #13 [] ip_local_deliver at ffffffff81566bd9 #14 [] ip_rcv_finish at ffffffff8156656d #15 [] ip_rcv at ffffffff81566f06 #16 [] __netif_receive_skb_core at ffffffff8152b3a2 #17 [] __netif_receive_skb at ffffffff8152b608 #18 [] netif_receive_skb at ffffffff8152b690 #19 [] vmxnet3_rq_rx_complete at ffffffffa015eeaf [vmxnet3] #20 [] vmxnet3_poll_rx_only at ffffffffa015f32a [vmxnet3] #21 [] net_rx_action at ffffffff8152bac2 #22 [] __do_softirq at ffffffff81084b4f #23 [] call_softirq at ffffffff8164845c #24 [] do_softirq at ffffffff81016fc5 #25 [] irq_exit at ffffffff81084ee5 #26 [] do_IRQ at ffffffff81648ff8 Of course it may happen with other NIC drivers as well. It's found the freed dst_entry here: 224 static bool tcp_in_quickack_mode(struct sock *sk)↩ 225 {↩ 226 ▹ const struct inet_connection_sock *icsk = inet_csk(sk);↩ 227 ▹ const struct dst_entry *dst = __sk_dst_get(sk);↩ 228 ↩ 229 ▹ return (dst && dst_metric(dst, RTAX_QUICKACK)) ||↩ 230 ▹ ▹ (icsk->icsk_ack.quick && !icsk->icsk_ack.pingpong);↩ 231 }↩ But there are other backtraces attributed to the same freed dst_entry in netfilter code as well. All the vmcores showed 2 significant clues: - Remote hosts behind the default gateway had always been redirected to a different gateway. A rtable/dst_entry will be added for that host. Making more dst_entrys with lower reference counts. Making this more probable. - All vmcores showed a postitive LockDroppedIcmps value, e.g: LockDroppedIcmps 267 A closer look at the tcp_v4_err() handler revealed that do_redirect() will run regardless of whether user space has the socket locked. This can result in a race condition where the same dst_entry cached in sk->sk_dst_entry can be decremented twice for the same socket via: do_redirect()->__sk_dst_check()-> dst_release(). Which leads to the dst_entry being prematurely freed with another socket pointing to it via sk->sk_dst_cache and a subsequent crash. To fix this skip do_redirect() if usespace has the socket locked. Instead let the redirect take place later when user space does not have the socket locked. The dccp/IPv6 code is very similar in this respect, so fixing it there too. As Eric Garver pointed out the following commit now invalidates routes. Which can set the dst->obsolete flag so that ipv4_dst_check() returns null and triggers the dst_release(). Fixes: ceb3320 ("ipv4: Kill routes during PMTU/redirect updates.") Cc: Eric Garver <[email protected]> Cc: Hannes Sowa <[email protected]> Signed-off-by: Jon Maxwell <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 4dfce57 upstream. There have been several reports over the years of NULL pointer dereferences in xfs_trans_log_inode during xfs_fsr processes, when the process is doing an fput and tearing down extents on the temporary inode, something like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 PID: 29439 TASK: ffff880550584fa0 CPU: 6 COMMAND: "xfs_fsr" [exception RIP: xfs_trans_log_inode+0x10] #9 [ffff8800a57bbbe0] xfs_bunmapi at ffffffffa037398e [xfs] #10 [ffff8800a57bbce8] xfs_itruncate_extents at ffffffffa0391b29 [xfs] #11 [ffff8800a57bbd88] xfs_inactive_truncate at ffffffffa0391d0c [xfs] #12 [ffff8800a57bbdb8] xfs_inactive at ffffffffa0392508 [xfs] #13 [ffff8800a57bbdd8] xfs_fs_evict_inode at ffffffffa035907e [xfs] #14 [ffff8800a57bbe00] evict at ffffffff811e1b67 #15 [ffff8800a57bbe28] iput at ffffffff811e23a5 #16 [ffff8800a57bbe58] dentry_kill at ffffffff811dcfc8 #17 [ffff8800a57bbe88] dput at ffffffff811dd06c #18 [ffff8800a57bbea8] __fput at ffffffff811c823b #19 [ffff8800a57bbef0] ____fput at ffffffff811c846e #20 [ffff8800a57bbf00] task_work_run at ffffffff81093b27 #21 [ffff8800a57bbf30] do_notify_resume at ffffffff81013b0c #22 [ffff8800a57bbf50] int_signal at ffffffff8161405d As it turns out, this is because the i_itemp pointer, along with the d_ops pointer, has been overwritten with zeros when we tear down the extents during truncate. When the in-core inode fork on the temporary inode used by xfs_fsr was originally set up during the extent swap, we mistakenly looked at di_nextents to determine whether all extents fit inline, but this misses extents generated by speculative preallocation; we should be using if_bytes instead. This mistake corrupts the in-memory inode, and code in xfs_iext_remove_inline eventually gets bad inputs, causing it to memmove and memset incorrect ranges; this became apparent because the two values in ifp->if_u2.if_inline_ext[1] contained what should have been in d_ops and i_itemp; they were memmoved due to incorrect array indexing and then the original locations were zeroed with memset, again due to an array overrun. Fix this by properly using i_df.if_bytes to determine the number of extents, not di_nextents. Thanks to dchinner for looking at this with me and spotting the root cause. [nborisov: backported to 4.4] Cc: [email protected] Signed-off-by: Eric Sandeen <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Dave Chinner <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> -- fs/xfs/xfs_bmap_util.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

commit 5165da5 upstream. Since v4.9 i2c-tiny-usb generates the below call trace and longer works, since it can't communicate with the USB device. The reason is, that since v4.9 the USB stack checks, that the buffer it should transfer is DMA capable. This was a requirement since v2.2 days, but it usually worked nevertheless. [ 17.504959] ------------[ cut here ]------------ [ 17.505488] WARNING: CPU: 0 PID: 93 at drivers/usb/core/hcd.c:1587 usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.506545] transfer buffer not dma capable [ 17.507022] Modules linked in: [ 17.507370] CPU: 0 PID: 93 Comm: i2cdetect Not tainted 4.11.0-rc8+ #10 [ 17.508103] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 17.509039] Call Trace: [ 17.509320] ? dump_stack+0x5c/0x78 [ 17.509714] ? __warn+0xbe/0xe0 [ 17.510073] ? warn_slowpath_fmt+0x5a/0x80 [ 17.510532] ? nommu_map_sg+0xb0/0xb0 [ 17.510949] ? usb_hcd_map_urb_for_dma+0x37c/0x570 [ 17.511482] ? usb_hcd_submit_urb+0x336/0xab0 [ 17.511976] ? wait_for_completion_timeout+0x12f/0x1a0 [ 17.512549] ? wait_for_completion_timeout+0x65/0x1a0 [ 17.513125] ? usb_start_wait_urb+0x65/0x160 [ 17.513604] ? usb_control_msg+0xdc/0x130 [ 17.514061] ? usb_xfer+0xa4/0x2a0 [ 17.514445] ? __i2c_transfer+0x108/0x3c0 [ 17.514899] ? i2c_transfer+0x57/0xb0 [ 17.515310] ? i2c_smbus_xfer_emulated+0x12f/0x590 [ 17.515851] ? _raw_spin_unlock_irqrestore+0x11/0x20 [ 17.516408] ? i2c_smbus_xfer+0x125/0x330 [ 17.516876] ? i2c_smbus_xfer+0x125/0x330 [ 17.517329] ? i2cdev_ioctl_smbus+0x1c1/0x2b0 [ 17.517824] ? i2cdev_ioctl+0x75/0x1c0 [ 17.518248] ? do_vfs_ioctl+0x9f/0x600 [ 17.518671] ? vfs_write+0x144/0x190 [ 17.519078] ? SyS_ioctl+0x74/0x80 [ 17.519463] ? entry_SYSCALL_64_fastpath+0x1e/0xad [ 17.519959] ---[ end trace d047c04982f5ac50 ]--- Signed-off-by: Sebastian Reichel <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Acked-by: Till Harbaum <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit ad0a45f ] If a given cpu is not in cpu_present and cpu hotplug is disabled, arch can skip setting up the cpu_dev. Arch cpuidle driver should pass correct cpu mask for registration, but failing to do so by the driver causes error to propagate and crash like this: [ 30.076045] Unable to handle kernel paging request for data at address 0x00000048 [ 30.076100] Faulting instruction address: 0xc0000000007b2f30 cpu 0x4d: Vector: 300 (Data Access) at [c000003feb18b670] pc: c0000000007b2f30: kobject_get+0x20/0x70 lr: c0000000007b3c94: kobject_add_internal+0x54/0x3f0 sp: c000003feb18b8f0 msr: 9000000000009033 dar: 48 dsisr: 40000000 current = 0xc000003fd2ed8300 paca = 0xc00000000fbab500 softe: 0 irq_happened: 0x01 pid = 1, comm = swapper/0 Linux version 4.11.0-rc2-svaidy+ (sv@sagarika) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #10 SMP Sun Mar 19 00:08:09 IST 2017 enter ? for help [c000003feb18b960] c0000000007b3c94 kobject_add_internal+0x54/0x3f0 [c000003feb18b9f0] c0000000007b43a4 kobject_init_and_add+0x64/0xa0 [c000003feb18ba70] c000000000e284f4 cpuidle_add_sysfs+0xb4/0x130 [c000003feb18baf0] c000000000e26038 cpuidle_register_device+0x118/0x1c0 [c000003feb18bb30] c000000000e26c48 cpuidle_register+0x78/0x120 [c000003feb18bbc0] c00000000168fd9c powernv_processor_idle_init+0x110/0x1c4 [c000003feb18bc40] c00000000000cff8 do_one_initcall+0x68/0x1d0 [c000003feb18bd00] c0000000016242f4 kernel_init_freeable+0x280/0x360 [c000003feb18bdc0] c00000000000d864 kernel_init+0x24/0x160 [c000003feb18be30] c00000000000b4e8 ret_from_kernel_thread+0x5c/0x74 Validating cpu_dev fixes the crash and reports correct error message like: [ 30.163506] Failed to register cpuidle device for cpu136 [ 30.173329] Registration of powernv driver failed. Signed-off-by: Vaidyanathan Srinivasan <[email protected]> [ rjw: Comment massage ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 2c0aa08 ] Scenario: 1. Port down and do fail over 2. Ap do rds_bind syscall PID: 47039 TASK: ffff89887e2fe640 CPU: 47 COMMAND: "kworker/u:6" #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518 #3 [ffff898e35f15b60] no_context at ffffffff8104854c #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff898e35f15dc8 RFLAGS: 00010282 RAX: 00000000fffffffe RBX: ffff889b77f6fc00 RCX:ffffffff81c99d88 RDX: 0000000000000000 RSI: ffff896019ee08e8 RDI:ffff889b77f6fc00 RBP: ffff898e35f15df0 R8: ffff896019ee08c8 R9:0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12:ffff896019ee08c0 R13: ffff889b77f6fe68 R14: ffffffff81c99d80 R15: ffffffffa022a1e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm] #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6 PID: 45659 TASK: ffff880d313d2500 CPU: 31 COMMAND: "oracle_45659_ap" #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm] #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma] #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds] #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds] #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670 PID: 45659 PID: 47039 rds_ib_laddr_check /* create id_priv with a null event_handler */ rdma_create_id rdma_bind_addr cma_acquire_dev /* add id_priv to cma_dev->id_list */ cma_attach_to_dev cma_ndev_work_handler /* event_hanlder is null */ id_priv->id.event_handler Signed-off-by: Guanglei Li <[email protected]> Signed-off-by: Honglei Wang <[email protected]> Reviewed-by: Junxiao Bi <[email protected]> Reviewed-by: Yanjun Zhu <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Acked-by: Doug Ledford <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit d0a255e upstream. A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit cf3591e upstream. Revert the commit bd293d0. The proper fix has been made available with commit d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread"). Note that the fix offered by commit bd293d0 doesn't really prevent the deadlock from occuring - if we look at the stacktrace reported by Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex - i.e. it has already successfully taken the mutex. Changing the mutex from mutex_lock to mutex_trylock won't help with deadlocks that happen afterwards. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] Fixes: bd293d0 ("dm bufio: fix deadlock with loop device") Depends-on: d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread") Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b57a55e ] There is a KASAN slab-out-of-bounds: BUG: KASAN: slab-out-of-bounds in _copy_from_iter_full+0x783/0xaa0 Read of size 80 at addr ffff88810c35e180 by task mount.cifs/539 CPU: 1 PID: 539 Comm: mount.cifs Not tainted 4.19 #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0xdd/0x12a print_address_description+0xa7/0x540 kasan_report+0x1ff/0x550 check_memory_region+0x2f1/0x310 memcpy+0x2f/0x80 _copy_from_iter_full+0x783/0xaa0 tcp_sendmsg_locked+0x1840/0x4140 tcp_sendmsg+0x37/0x60 inet_sendmsg+0x18c/0x490 sock_sendmsg+0xae/0x130 smb_send_kvec+0x29c/0x520 __smb_send_rqst+0x3ef/0xc60 smb_send_rqst+0x25a/0x2e0 compound_send_recv+0x9e8/0x2af0 cifs_send_recv+0x24/0x30 SMB2_open+0x35e/0x1620 open_shroot+0x27b/0x490 smb2_open_op_close+0x4e1/0x590 smb2_query_path_info+0x2ac/0x650 cifs_get_inode_info+0x1058/0x28f0 cifs_root_iget+0x3bb/0xf80 cifs_smb3_do_mount+0xe00/0x14c0 cifs_do_mount+0x15/0x20 mount_fs+0x5e/0x290 vfs_kern_mount+0x88/0x460 do_mount+0x398/0x31e0 ksys_mount+0xc6/0x150 __x64_sys_mount+0xea/0x190 do_syscall_64+0x122/0x590 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It can be reproduced by the following step: 1. samba configured with: server max protocol = SMB2_10 2. mount -o vers=default When parse the mount version parameter, the 'ops' and 'vals' was setted to smb30, if negotiate result is smb21, just update the 'ops' to smb21, but the 'vals' is still smb30. When add lease context, the iov_base is allocated with smb21 ops, but the iov_len is initiallited with the smb30. Because the iov_len is longer than iov_base, when send the message, copy array out of bounds. we need to keep the 'ops' and 'vals' consistent. Fixes: 9764c02 ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)") Fixes: d5c7076 ("smb3: add smb3.1.1 to default dialect list") Signed-off-by: ZhangXiaoxu <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 1bc7896 ] When experimenting with bpf_send_signal() helper in our production environment (5.2 based), we experienced a deadlock in NMI mode: #5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24 #6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012 #7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd #8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55 #9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602 #10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a #11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227 #12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140 #13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf #14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09 #15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47 #16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d #17 [ffffc9002219fc90] schedule at ffffffff81a3e219 #18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9 #19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529 #20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc #21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c #22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602 #23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068 The above call stack is actually very similar to an issue reported by Commit eac9153 ("bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()") by Song Liu. The only difference is bpf_send_signal() helper instead of bpf_get_stack() helper. The above deadlock is triggered with a perf_sw_event. Similar to Commit eac9153, the below almost identical reproducer used tracepoint point sched/sched_switch so the issue can be easily caught. /* stress_test.c */ #include <stdio.h> #include <stdlib.h> #include <sys/mman.h> #include <pthread.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #define THREAD_COUNT 1000 char *filename; void *worker(void *p) { void *ptr; int fd; char *pptr; fd = open(filename, O_RDONLY); if (fd < 0) return NULL; while (1) { struct timespec ts = {0, 1000 + rand() % 2000}; ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0); usleep(1); if (ptr == MAP_FAILED) { printf("failed to mmap\n"); break; } munmap(ptr, 4096 * 64); usleep(1); pptr = malloc(1); usleep(1); pptr[0] = 1; usleep(1); free(pptr); usleep(1); nanosleep(&ts, NULL); } close(fd); return NULL; } int main(int argc, char *argv[]) { void *ptr; int i; pthread_t threads[THREAD_COUNT]; if (argc < 2) return 0; filename = argv[1]; for (i = 0; i < THREAD_COUNT; i++) { if (pthread_create(threads + i, NULL, worker, NULL)) { fprintf(stderr, "Error creating thread\n"); return 0; } } for (i = 0; i < THREAD_COUNT; i++) pthread_join(threads[i], NULL); return 0; } and the following command: 1. run `stress_test /bin/ls` in one windown 2. hack bcc trace.py with the following change: # --- a/tools/trace.py # +++ b/tools/trace.py @@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s); __data.tgid = __tgid; __data.pid = __pid; bpf_get_current_comm(&__data.comm, sizeof(__data.comm)); + bpf_send_signal(10); %s %s %s.perf_submit(%s, &__data, sizeof(__data)); 3. in a different window run ./trace.py -p $(pidof stress_test) t:sched:sched_switch The deadlock can be reproduced in our production system. Similar to Song's fix, the fix is to delay sending signal if irqs is disabled to avoid deadlocks involving with rq_lock. With this change, my above stress-test in our production system won't cause deadlock any more. I also implemented a scale-down version of reproducer in the selftest (a subsequent commit). With latest bpf-next, it complains for the following potential deadlock. [ 32.832450] -> #1 (&p->pi_lock){-.-.}: [ 32.833100] _raw_spin_lock_irqsave+0x44/0x80 [ 32.833696] task_rq_lock+0x2c/0xa0 [ 32.834182] task_sched_runtime+0x59/0xd0 [ 32.834721] thread_group_cputime+0x250/0x270 [ 32.835304] thread_group_cputime_adjusted+0x2e/0x70 [ 32.835959] do_task_stat+0x8a7/0xb80 [ 32.836461] proc_single_show+0x51/0xb0 ... [ 32.839512] -> #0 (&(&sighand->siglock)->rlock){....}: [ 32.840275] __lock_acquire+0x1358/0x1a20 [ 32.840826] lock_acquire+0xc7/0x1d0 [ 32.841309] _raw_spin_lock_irqsave+0x44/0x80 [ 32.841916] __lock_task_sighand+0x79/0x160 [ 32.842465] do_send_sig_info+0x35/0x90 [ 32.842977] bpf_send_signal+0xa/0x10 [ 32.843464] bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000 [ 32.844301] trace_call_bpf+0x115/0x270 [ 32.844809] perf_trace_run_bpf_submit+0x4a/0xc0 [ 32.845411] perf_trace_sched_switch+0x10f/0x180 [ 32.846014] __schedule+0x45d/0x880 [ 32.846483] schedule+0x5f/0xd0 ... [ 32.853148] Chain exists of: [ 32.853148] &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock [ 32.853148] [ 32.854451] Possible unsafe locking scenario: [ 32.854451] [ 32.855173] CPU0 CPU1 [ 32.855745] ---- ---- [ 32.856278] lock(&rq->lock); [ 32.856671] lock(&p->pi_lock); [ 32.857332] lock(&rq->lock); [ 32.857999] lock(&(&sighand->siglock)->rlock); Deadlock happens on CPU0 when it tries to acquire &sighand->siglock but it has been held by CPU1 and CPU1 tries to grab &rq->lock and cannot get it. This is not exactly the callstack in our production environment, but sympotom is similar and both locks are using spin_lock_irqsave() to acquire the lock, and both involves rq_lock. The fix to delay sending signal when irq is disabled also fixed this issue. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Cc: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Luca Abeni reported this: | BUG: scheduling while atomic: kworker/u8:2/15203/0x00000003 | CPU: 1 PID: 15203 Comm: kworker/u8:2 Not tainted 4.19.1-rt3 #10 | Call Trace: | rt_spin_lock+0x3f/0x50 | gen6_read32+0x45/0x1d0 [i915] | g4x_get_vblank_counter+0x36/0x40 [i915] | trace_event_raw_event_i915_pipe_update_start+0x7d/0xf0 [i915] The tracing events use trace_i915_pipe_update_start() among other events use functions acquire spin locks. A few trace points use intel_get_crtc_scanline(), others use ->get_vblank_counter() wich also might acquire a sleeping lock. Based on this I don't see any other way than disable trace points on RT. Cc: [email protected] Reported-by: Luca Abeni <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]>

[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Link: https://lore.kernel.org/linux-trace-devel/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b12eea5 ] The evsel->unit borrows a pointer of pmu event or alias instead of owns a string. But tool event (duration_time) passes a result of strdup() caused a leak. It was found by ASAN during metric test: Direct leak of 210 byte(s) in 70 object(s) allocated from: #0 0x7fe366fca0b5 in strdup (/lib/x86_64-linux-gnu/libasan.so.5+0x920b5) #1 0x559fbbcc6ea3 in add_event_tool util/parse-events.c:414 #2 0x559fbbcc6ea3 in parse_events_add_tool util/parse-events.c:1414 #3 0x559fbbd8474d in parse_events_parse util/parse-events.y:439 #4 0x559fbbcc95da in parse_events__scanner util/parse-events.c:2096 #5 0x559fbbcc95da in __parse_events util/parse-events.c:2141 #6 0x559fbbc28555 in check_parse_id tests/pmu-events.c:406 #7 0x559fbbc28555 in check_parse_id tests/pmu-events.c:393 #8 0x559fbbc28555 in check_parse_cpu tests/pmu-events.c:415 #9 0x559fbbc28555 in test_parsing tests/pmu-events.c:498 #10 0x559fbbc0109b in run_test tests/builtin-test.c:410 #11 0x559fbbc0109b in test_and_print tests/builtin-test.c:440 #12 0x559fbbc03e69 in __cmd_test tests/builtin-test.c:695 #13 0x559fbbc03e69 in cmd_test tests/builtin-test.c:807 #14 0x559fbbc691f4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #15 0x559fbbb071a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #16 0x559fbbb071a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #17 0x559fbbb071a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #18 0x7fe366b68cc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: f0fbb11 ("perf stat: Implement duration_time as a proper event") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 66d204a upstream. Very sporadically I had test case btrfs/069 from fstests hanging (for years, it is not a recent regression), with the following traces in dmesg/syslog: [162301.160628] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg started [162301.181196] BTRFS info (device sdc): scrub: finished on devid 4 with status: 0 [162301.287162] BTRFS info (device sdc): dev_replace from /dev/sdd (devid 2) to /dev/sdg finished [162513.513792] INFO: task btrfs-transacti:1356167 blocked for more than 120 seconds. [162513.514318] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.514522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.514747] task:btrfs-transacti state:D stack: 0 pid:1356167 ppid: 2 flags:0x00004000 [162513.514751] Call Trace: [162513.514761] __schedule+0x5ce/0xd00 [162513.514765] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.514771] schedule+0x46/0xf0 [162513.514844] wait_current_trans+0xde/0x140 [btrfs] [162513.514850] ? finish_wait+0x90/0x90 [162513.514864] start_transaction+0x37c/0x5f0 [btrfs] [162513.514879] transaction_kthread+0xa4/0x170 [btrfs] [162513.514891] ? btrfs_cleanup_transaction+0x660/0x660 [btrfs] [162513.514894] kthread+0x153/0x170 [162513.514897] ? kthread_stop+0x2c0/0x2c0 [162513.514902] ret_from_fork+0x22/0x30 [162513.514916] INFO: task fsstress:1356184 blocked for more than 120 seconds. [162513.515192] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.515431] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.515680] task:fsstress state:D stack: 0 pid:1356184 ppid:1356177 flags:0x00004000 [162513.515682] Call Trace: [162513.515688] __schedule+0x5ce/0xd00 [162513.515691] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.515697] schedule+0x46/0xf0 [162513.515712] wait_current_trans+0xde/0x140 [btrfs] [162513.515716] ? finish_wait+0x90/0x90 [162513.515729] start_transaction+0x37c/0x5f0 [btrfs] [162513.515743] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.515753] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.515758] ? __ia32_sys_fdatasync+0x20/0x20 [162513.515761] iterate_supers+0x87/0xf0 [162513.515765] ksys_sync+0x60/0xb0 [162513.515768] __do_sys_sync+0xa/0x10 [162513.515771] do_syscall_64+0x33/0x80 [162513.515774] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.515781] RIP: 0033:0x7f5238f50bd7 [162513.515782] Code: Bad RIP value. [162513.515784] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.515786] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.515788] RDX: 00000000ffffffff RSI: 000000000daf0e74 RDI: 000000000000003a [162513.515789] RBP: 0000000000000032 R08: 000000000000000a R09: 00007f5239019be0 [162513.515791] R10: fffffffffffff24f R11: 0000000000000206 R12: 000000000000003a [162513.515792] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.515804] INFO: task fsstress:1356185 blocked for more than 120 seconds. [162513.516064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.516329] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.516617] task:fsstress state:D stack: 0 pid:1356185 ppid:1356177 flags:0x00000000 [162513.516620] Call Trace: [162513.516625] __schedule+0x5ce/0xd00 [162513.516628] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.516634] schedule+0x46/0xf0 [162513.516647] wait_current_trans+0xde/0x140 [btrfs] [162513.516650] ? finish_wait+0x90/0x90 [162513.516662] start_transaction+0x4d7/0x5f0 [btrfs] [162513.516679] btrfs_setxattr_trans+0x3c/0x100 [btrfs] [162513.516686] __vfs_setxattr+0x66/0x80 [162513.516691] __vfs_setxattr_noperm+0x70/0x200 [162513.516697] vfs_setxattr+0x6b/0x120 [162513.516703] setxattr+0x125/0x240 [162513.516709] ? lock_acquire+0xb1/0x480 [162513.516712] ? mnt_want_write+0x20/0x50 [162513.516721] ? rcu_read_lock_any_held+0x8e/0xb0 [162513.516723] ? preempt_count_add+0x49/0xa0 [162513.516725] ? __sb_start_write+0x19b/0x290 [162513.516727] ? preempt_count_add+0x49/0xa0 [162513.516732] path_setxattr+0xba/0xd0 [162513.516739] __x64_sys_setxattr+0x27/0x30 [162513.516741] do_syscall_64+0x33/0x80 [162513.516743] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.516745] RIP: 0033:0x7f5238f56d5a [162513.516746] Code: Bad RIP value. [162513.516748] RSP: 002b:00007fff67b97868 EFLAGS: 00000202 ORIG_RAX: 00000000000000bc [162513.516750] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f5238f56d5a [162513.516751] RDX: 000055b1fbb0d5a0 RSI: 00007fff67b978a0 RDI: 000055b1fbb0d470 [162513.516753] RBP: 000055b1fbb0d5a0 R08: 0000000000000001 R09: 00007fff67b97700 [162513.516754] R10: 0000000000000004 R11: 0000000000000202 R12: 0000000000000004 [162513.516756] R13: 0000000000000024 R14: 0000000000000001 R15: 00007fff67b978a0 [162513.516767] INFO: task fsstress:1356196 blocked for more than 120 seconds. [162513.517064] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.517365] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.517763] task:fsstress state:D stack: 0 pid:1356196 ppid:1356177 flags:0x00004000 [162513.517780] Call Trace: [162513.517786] __schedule+0x5ce/0xd00 [162513.517789] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.517796] schedule+0x46/0xf0 [162513.517810] wait_current_trans+0xde/0x140 [btrfs] [162513.517814] ? finish_wait+0x90/0x90 [162513.517829] start_transaction+0x37c/0x5f0 [btrfs] [162513.517845] btrfs_attach_transaction_barrier+0x1f/0x50 [btrfs] [162513.517857] btrfs_sync_fs+0x61/0x1c0 [btrfs] [162513.517862] ? __ia32_sys_fdatasync+0x20/0x20 [162513.517865] iterate_supers+0x87/0xf0 [162513.517869] ksys_sync+0x60/0xb0 [162513.517872] __do_sys_sync+0xa/0x10 [162513.517875] do_syscall_64+0x33/0x80 [162513.517878] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.517881] RIP: 0033:0x7f5238f50bd7 [162513.517883] Code: Bad RIP value. [162513.517885] RSP: 002b:00007fff67b978e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a2 [162513.517887] RAX: ffffffffffffffda RBX: 000055b1fad2c560 RCX: 00007f5238f50bd7 [162513.517889] RDX: 0000000000000000 RSI: 000000007660add2 RDI: 0000000000000053 [162513.517891] RBP: 0000000000000032 R08: 0000000000000067 R09: 00007f5239019be0 [162513.517893] R10: fffffffffffff24f R11: 0000000000000206 R12: 0000000000000053 [162513.517895] R13: 00007fff67b97950 R14: 00007fff67b97906 R15: 000055b1fad1a340 [162513.517908] INFO: task fsstress:1356197 blocked for more than 120 seconds. [162513.518298] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.518672] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.519157] task:fsstress state:D stack: 0 pid:1356197 ppid:1356177 flags:0x00000000 [162513.519160] Call Trace: [162513.519165] __schedule+0x5ce/0xd00 [162513.519168] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.519174] schedule+0x46/0xf0 [162513.519190] wait_current_trans+0xde/0x140 [btrfs] [162513.519193] ? finish_wait+0x90/0x90 [162513.519206] start_transaction+0x4d7/0x5f0 [btrfs] [162513.519222] btrfs_create+0x57/0x200 [btrfs] [162513.519230] lookup_open+0x522/0x650 [162513.519246] path_openat+0x2b8/0xa50 [162513.519270] do_filp_open+0x91/0x100 [162513.519275] ? find_held_lock+0x32/0x90 [162513.519280] ? lock_acquired+0x33b/0x470 [162513.519285] ? do_raw_spin_unlock+0x4b/0xc0 [162513.519287] ? _raw_spin_unlock+0x29/0x40 [162513.519295] do_sys_openat2+0x20d/0x2d0 [162513.519300] do_sys_open+0x44/0x80 [162513.519304] do_syscall_64+0x33/0x80 [162513.519307] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.519309] RIP: 0033:0x7f5238f4a903 [162513.519310] Code: Bad RIP value. [162513.519312] RSP: 002b:00007fff67b97758 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 [162513.519314] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f5238f4a903 [162513.519316] RDX: 0000000000000000 RSI: 00000000000001b6 RDI: 000055b1fbb0d470 [162513.519317] RBP: 00007fff67b978c0 R08: 0000000000000001 R09: 0000000000000002 [162513.519319] R10: 00007fff67b974f7 R11: 0000000000000246 R12: 0000000000000013 [162513.519320] R13: 00000000000001b6 R14: 00007fff67b97906 R15: 000055b1fad1c620 [162513.519332] INFO: task btrfs:1356211 blocked for more than 120 seconds. [162513.519727] Not tainted 5.9.0-rc6-btrfs-next-69 #1 [162513.520115] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [162513.520508] task:btrfs state:D stack: 0 pid:1356211 ppid:1356178 flags:0x00004002 [162513.520511] Call Trace: [162513.520516] __schedule+0x5ce/0xd00 [162513.520519] ? _raw_spin_unlock_irqrestore+0x3c/0x60 [162513.520525] schedule+0x46/0xf0 [162513.520544] btrfs_scrub_pause+0x11f/0x180 [btrfs] [162513.520548] ? finish_wait+0x90/0x90 [162513.520562] btrfs_commit_transaction+0x45a/0xc30 [btrfs] [162513.520574] ? start_transaction+0xe0/0x5f0 [btrfs] [162513.520596] btrfs_dev_replace_finishing+0x6d8/0x711 [btrfs] [162513.520619] btrfs_dev_replace_by_ioctl.cold+0x1cc/0x1fd [btrfs] [162513.520639] btrfs_ioctl+0x2a25/0x36f0 [btrfs] [162513.520643] ? do_sigaction+0xf3/0x240 [162513.520645] ? find_held_lock+0x32/0x90 [162513.520648] ? do_sigaction+0xf3/0x240 [162513.520651] ? lock_acquired+0x33b/0x470 [162513.520655] ? _raw_spin_unlock_irq+0x24/0x50 [162513.520657] ? lockdep_hardirqs_on+0x7d/0x100 [162513.520660] ? _raw_spin_unlock_irq+0x35/0x50 [162513.520662] ? do_sigaction+0xf3/0x240 [162513.520671] ? __x64_sys_ioctl+0x83/0xb0 [162513.520672] __x64_sys_ioctl+0x83/0xb0 [162513.520677] do_syscall_64+0x33/0x80 [162513.520679] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [162513.520681] RIP: 0033:0x7fc3cd307d87 [162513.520682] Code: Bad RIP value. [162513.520684] RSP: 002b:00007ffe30a56bb8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [162513.520686] RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fc3cd307d87 [162513.520687] RDX: 00007ffe30a57a30 RSI: 00000000ca289435 RDI: 0000000000000003 [162513.520689] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [162513.520690] R10: 0000000000000008 R11: 0000000000000202 R12: 0000000000000003 [162513.520692] R13: 0000557323a212e0 R14: 00007ffe30a5a520 R15: 0000000000000001 [162513.520703] Showing all locks held in the system: [162513.520712] 1 lock held by khungtaskd/54: [162513.520713] #0: ffffffffb40a91a0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x15/0x197 [162513.520728] 1 lock held by in:imklog/596: [162513.520729] #0: ffff8f3f0d781400 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0x4d/0x60 [162513.520782] 1 lock held by btrfs-transacti/1356167: [162513.520784] #0: ffff8f3d810cc848 (&fs_info->transaction_kthread_mutex){+.+.}-{3:3}, at: transaction_kthread+0x4a/0x170 [btrfs] [162513.520798] 1 lock held by btrfs/1356190: [162513.520800] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write_file+0x22/0x60 [162513.520805] 1 lock held by fsstress/1356184: [162513.520806] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520811] 3 locks held by fsstress/1356185: [162513.520812] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520815] #1: ffff8f3d80a650b8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: vfs_setxattr+0x50/0x120 [162513.520820] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520833] 1 lock held by fsstress/1356196: [162513.520834] #0: ffff8f3d576440e8 (&type->s_umount_key#62){++++}-{3:3}, at: iterate_supers+0x6f/0xf0 [162513.520838] 3 locks held by fsstress/1356197: [162513.520839] #0: ffff8f3d57644470 (sb_writers#15){.+.+}-{0:0}, at: mnt_want_write+0x20/0x50 [162513.520843] #1: ffff8f3d506465e8 (&type->i_mutex_dir_key#10){++++}-{3:3}, at: path_openat+0x2a7/0xa50 [162513.520846] #2: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] [162513.520858] 2 locks held by btrfs/1356211: [162513.520859] #0: ffff8f3d810cde30 (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+.}-{3:3}, at: btrfs_dev_replace_finishing+0x52/0x711 [btrfs] [162513.520877] #1: ffff8f3d57644690 (sb_internal#2){.+.+}-{0:0}, at: start_transaction+0x40e/0x5f0 [btrfs] This was weird because the stack traces show that a transaction commit, triggered by a device replace operation, is blocking trying to pause any running scrubs but there are no stack traces of blocked tasks doing a scrub. After poking around with drgn, I noticed there was a scrub task that was constantly running and blocking for shorts periods of time: >>> t = find_task(prog, 1356190) >>> prog.stack_trace(t) #0 __schedule+0x5ce/0xcfc #1 schedule+0x46/0xe4 #2 schedule_timeout+0x1df/0x475 #3 btrfs_reada_wait+0xda/0x132 #4 scrub_stripe+0x2a8/0x112f #5 scrub_chunk+0xcd/0x134 #6 scrub_enumerate_chunks+0x29e/0x5ee #7 btrfs_scrub_dev+0x2d5/0x91b #8 btrfs_ioctl+0x7f5/0x36e7 #9 __x64_sys_ioctl+0x83/0xb0 #10 do_syscall_64+0x33/0x77 #11 entry_SYSCALL_64+0x7c/0x156 Which corresponds to: int btrfs_reada_wait(void *handle) { struct reada_control *rc = handle; struct btrfs_fs_info *fs_info = rc->fs_info; while (atomic_read(&rc->elems)) { if (!atomic_read(&fs_info->reada_works_cnt)) reada_start_machine(fs_info); wait_event_timeout(rc->wait, atomic_read(&rc->elems) == 0, (HZ + 9) / 10); } (...) So the counter "rc->elems" was set to 1 and never decreased to 0, causing the scrub task to loop forever in that function. Then I used the following script for drgn to check the readahead requests: $ cat dump_reada.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) def dump_re(re): nzones = re.nzones.value_() print(f're at {hex(re.value_())}') print(f'\t logical {re.logical.value_()}') print(f'\t refcnt {re.refcnt.value_()}') print(f'\t nzones {nzones}') for i in range(nzones): dev = re.zones[i].device name = dev.name.str.string_() print(f'\t\t dev id {dev.devid.value_()} name {name}') print() for _, e in radix_tree_for_each(fs_info.reada_tree): re = cast('struct reada_extent *', e) dump_re(re) $ drgn dump_reada.py re at 0xffff8f3da9d25ad8 logical 38928384 refcnt 1 nzones 1 dev id 0 name b'/dev/sdd' $ So there was one readahead extent with a single zone corresponding to the source device of that last device replace operation logged in dmesg/syslog. Also the ID of that zone's device was 0 which is a special value set in the source device of a device replace operation when the operation finishes (constant BTRFS_DEV_REPLACE_DEVID set at btrfs_dev_replace_finishing()), confirming again that device /dev/sdd was the source of a device replace operation. Normally there should be as many zones in the readahead extent as there are devices, and I wasn't expecting the extent to be in a block group with a 'single' profile, so I went and confirmed with the following drgn script that there weren't any single profile block groups: $ cat dump_block_groups.py import sys import drgn from drgn import NULL, Object, cast, container_of, execscript, \ reinterpret, sizeof from drgn.helpers.linux import * mnt_path = b"/home/fdmanana/btrfs-tests/scratch_1" mnt = None for mnt in for_each_mount(prog, dst = mnt_path): pass if mnt is None: sys.stderr.write(f'Error: mount point {mnt_path} not found\n') sys.exit(1) fs_info = cast('struct btrfs_fs_info *', mnt.mnt.mnt_sb.s_fs_info) BTRFS_BLOCK_GROUP_DATA = (1 << 0) BTRFS_BLOCK_GROUP_SYSTEM = (1 << 1) BTRFS_BLOCK_GROUP_METADATA = (1 << 2) BTRFS_BLOCK_GROUP_RAID0 = (1 << 3) BTRFS_BLOCK_GROUP_RAID1 = (1 << 4) BTRFS_BLOCK_GROUP_DUP = (1 << 5) BTRFS_BLOCK_GROUP_RAID10 = (1 << 6) BTRFS_BLOCK_GROUP_RAID5 = (1 << 7) BTRFS_BLOCK_GROUP_RAID6 = (1 << 8) BTRFS_BLOCK_GROUP_RAID1C3 = (1 << 9) BTRFS_BLOCK_GROUP_RAID1C4 = (1 << 10) def bg_flags_string(bg): flags = bg.flags.value_() ret = '' if flags & BTRFS_BLOCK_GROUP_DATA: ret = 'data' if flags & BTRFS_BLOCK_GROUP_METADATA: if len(ret) > 0: ret += '|' ret += 'meta' if flags & BTRFS_BLOCK_GROUP_SYSTEM: if len(ret) > 0: ret += '|' ret += 'system' if flags & BTRFS_BLOCK_GROUP_RAID0: ret += ' raid0' elif flags & BTRFS_BLOCK_GROUP_RAID1: ret += ' raid1' elif flags & BTRFS_BLOCK_GROUP_DUP: ret += ' dup' elif flags & BTRFS_BLOCK_GROUP_RAID10: ret += ' raid10' elif flags & BTRFS_BLOCK_GROUP_RAID5: ret += ' raid5' elif flags & BTRFS_BLOCK_GROUP_RAID6: ret += ' raid6' elif flags & BTRFS_BLOCK_GROUP_RAID1C3: ret += ' raid1c3' elif flags & BTRFS_BLOCK_GROUP_RAID1C4: ret += ' raid1c4' else: ret += ' single' return ret def dump_bg(bg): print() print(f'block group at {hex(bg.value_())}') print(f'\t start {bg.start.value_()} length {bg.length.value_()}') print(f'\t flags {bg.flags.value_()} - {bg_flags_string(bg)}') bg_root = fs_info.block_group_cache_tree.address_of_() for bg in rbtree_inorder_for_each_entry('struct btrfs_block_group', bg_root, 'cache_node'): dump_bg(bg) $ drgn dump_block_groups.py block group at 0xffff8f3d673b0400 start 22020096 length 16777216 flags 258 - system raid6 block group at 0xffff8f3d53ddb400 start 38797312 length 536870912 flags 260 - meta raid6 block group at 0xffff8f3d5f4d9c00 start 575668224 length 2147483648 flags 257 - data raid6 block group at 0xffff8f3d08189000 start 2723151872 length 67108864 flags 258 - system raid6 block group at 0xffff8f3db70ff000 start 2790260736 length 1073741824 flags 260 - meta raid6 block group at 0xffff8f3d5f4dd800 start 3864002560 length 67108864 flags 258 - system raid6 block group at 0xffff8f3d67037000 start 3931111424 length 2147483648 flags 257 - data raid6 $ So there were only 2 reasons left for having a readahead extent with a single zone: reada_find_zone(), called when creating a readahead extent, returned NULL either because we failed to find the corresponding block group or because a memory allocation failed. With some additional and custom tracing I figured out that on every further ocurrence of the problem the block group had just been deleted when we were looping to create the zones for the readahead extent (at reada_find_extent()), so we ended up with only one zone in the readahead extent, corresponding to a device that ends up getting replaced. So after figuring that out it became obvious why the hang happens: 1) Task A starts a scrub on any device of the filesystem, except for device /dev/sdd; 2) Task B starts a device replace with /dev/sdd as the source device; 3) Task A calls btrfs_reada_add() from scrub_stripe() and it is currently starting to scrub a stripe from block group X. This call to btrfs_reada_add() is the one for the extent tree. When btrfs_reada_add() calls reada_add_block(), it passes the logical address of the extent tree's root node as its 'logical' argument - a value of 38928384; 4) Task A then enters reada_find_extent(), called from reada_add_block(). It finds there isn't any existing readahead extent for the logical address 38928384, so it proceeds to the path of creating a new one. It calls btrfs_map_block() to find out which stripes exist for the block group X. On the first iteration of the for loop that iterates over the stripes, it finds the stripe for device /dev/sdd, so it creates one zone for that device and adds it to the readahead extent. Before getting into the second iteration of the loop, the cleanup kthread deletes block group X because it was empty. So in the iterations for the remaining stripes it does not add more zones to the readahead extent, because the calls to reada_find_zone() returned NULL because they couldn't find block group X anymore. As a result the new readahead extent has a single zone, corresponding to the device /dev/sdd; 4) Before task A returns to btrfs_reada_add() and queues the readahead job for the readahead work queue, task B finishes the device replace and at btrfs_dev_replace_finishing() swaps the device /dev/sdd with the new device /dev/sdg; 5) Task A returns to reada_add_block(), which increments the counter "->elems" of the reada_control structure allocated at btrfs_reada_add(). Then it returns back to btrfs_reada_add() and calls reada_start_machine(). This queues a job in the readahead work queue to run the function reada_start_machine_worker(), which calls __reada_start_machine(). At __reada_start_machine() we take the device list mutex and for each device found in the current device list, we call reada_start_machine_dev() to start the readahead work. However at this point the device /dev/sdd was already freed and is not in the device list anymore. This means the corresponding readahead for the extent at 38928384 is never started, and therefore the "->elems" counter of the reada_control structure allocated at btrfs_reada_add() never goes down to 0, causing the call to btrfs_reada_wait(), done by the scrub task, to wait forever. Note that the readahead request can be made either after the device replace started or before it started, however in pratice it is very unlikely that a device replace is able to start after a readahead request is made and is able to complete before the readahead request completes - maybe only on a very small and nearly empty filesystem. This hang however is not the only problem we can have with readahead and device removals. When the readahead extent has other zones other than the one corresponding to the device that is being removed (either by a device replace or a device remove operation), we risk having a use-after-free on the device when dropping the last reference of the readahead extent. For example if we create a readahead extent with two zones, one for the device /dev/sdd and one for the device /dev/sde: 1) Before the readahead worker starts, the device /dev/sdd is removed, and the corresponding btrfs_device structure is freed. However the readahead extent still has the zone pointing to the device structure; 2) When the readahead worker starts, it only finds device /dev/sde in the current device list of the filesystem; 3) It starts the readahead work, at reada_start_machine_dev(), using the device /dev/sde; 4) Then when it finishes reading the extent from device /dev/sde, it calls __readahead_hook() which ends up dropping the last reference on the readahead extent through the last call to reada_extent_put(); 5) At reada_extent_put() it iterates over each zone of the readahead extent and attempts to delete an element from the device's 'reada_extents' radix tree, resulting in a use-after-free, as the device pointer of the zone for /dev/sdd is now stale. We can also access the device after dropping the last reference of a zone, through reada_zone_release(), also called by reada_extent_put(). And a device remove suffers the same problem, however since it shrinks the device size down to zero before removing the device, it is very unlikely to still have readahead requests not completed by the time we free the device, the only possibility is if the device has a very little space allocated. While the hang problem is exclusive to scrub, since it is currently the only user of btrfs_reada_add() and btrfs_reada_wait(), the use-after-free problem affects any path that triggers readhead, which includes btree_readahead_hook() and __readahead_hook() (a readahead worker can trigger readahed for the children of a node) for example - any path that ends up calling reada_add_block() can trigger the use-after-free after a device is removed. So fix this by waiting for any readahead requests for a device to complete before removing a device, ensuring that while waiting for existing ones no new ones can be made. This problem has been around for a very long time - the readahead code was added in 2011, device remove exists since 2008 and device replace was introduced in 2013, hard to pick a specific commit for a git Fixes tag. CC: [email protected] # 4.4+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…antiated commit 3c2e226 upstream. arm:pxa_defconfig can result in the following crash if the max1111 driver is not instantiated. Unhandled fault: page domain fault (0x01b) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 1b [linux4sam#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 300 Comm: kworker/0:1 Not tainted 4.5.0-01301-g1701f680407c linux4sam#10 Hardware name: SHARP Akita Workqueue: events sharpsl_charge_toggle task: c390a000 ti: c391e000 task.ti: c391e000 PC is at max1111_read_channel+0x20/0x30 LR is at sharpsl_pm_pxa_read_max1111+0x2c/0x3c pc : [<c03aaab0>] lr : [<c0024b50>] psr: 20000013 ... [<c03aaab0>] (max1111_read_channel) from [<c0024b50>] (sharpsl_pm_pxa_read_max1111+0x2c/0x3c) [<c0024b50>] (sharpsl_pm_pxa_read_max1111) from [<c00262e0>] (spitzpm_read_devdata+0x5c/0xc4) [<c00262e0>] (spitzpm_read_devdata) from [<c0024094>] (sharpsl_check_battery_temp+0x78/0x110) [<c0024094>] (sharpsl_check_battery_temp) from [<c0024f9c>] (sharpsl_charge_toggle+0x48/0x110) [<c0024f9c>] (sharpsl_charge_toggle) from [<c004429c>] (process_one_work+0x14c/0x48c) [<c004429c>] (process_one_work) from [<c0044618>] (worker_thread+0x3c/0x5d4) [<c0044618>] (worker_thread) from [<c004a238>] (kthread+0xd0/0xec) [<c004a238>] (kthread) from [<c000a670>] (ret_from_fork+0x14/0x24) This can occur because the SPI controller driver (SPI_PXA2XX) is built as module and thus not necessarily loaded. While building SPI_PXA2XX into the kernel would make the problem disappear, it appears prudent to ensure that the driver is instantiated before accessing its data structures. Cc: Arnd Bergmann <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit c5c97ca ] The ubsan reported the following error. It was because sample's raw data missed u32 padding at the end. So it broke the alignment of the array after it. The raw data contains an u32 size prefix so the data size should have an u32 padding after 8-byte aligned data. 27: Sample parsing :util/synthetic-events.c:1539:4: runtime error: store to misaligned address 0x62100006b9bc for type '__u64' (aka 'unsigned long long'), which requires 8 byte alignment 0x62100006b9bc: note: pointer points here 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13 #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8 #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9 #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9 #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9 #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4 #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9 #7 0x56153264e796 in run_builtin perf.c:312:11 #8 0x56153264cf03 in handle_internal_command perf.c:364:8 #9 0x56153264e47d in run_argv perf.c:408:2 #10 0x56153264c9a9 in main perf.c:538:3 #11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc) #12 0x561532596828 in _start ... SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use util/synthetic-events.c:1539:4 in Fixes: 045f8cd ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…g system shutdown [ Upstream commit 45a2702 ] During Coldboot stress tests, system encountered the following panic. Panic logs depicts rt5682_i2c_shutdown() happened first and then later jack detect handler workqueue function triggered. This situation causes panic as rt5682_i2c_shutdown() resets codec. Fix this panic by cancelling all jack detection delayed work. Panic log: [ 20.936124] sof_pci_shutdown [ 20.940248] snd_sof_device_shutdown [ 20.945023] snd_sof_shutdown [ 21.126849] rt5682_i2c_shutdown [ 21.286053] rt5682_jack_detect_handler [ 21.291235] BUG: kernel NULL pointer dereference, address: 000000000000037c [ 21.299302] #PF: supervisor read access in kernel mode [ 21.305254] #PF: error_code(0x0000) - not-present page [ 21.311218] PGD 0 P4D 0 [ 21.314155] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 21.319206] CPU: 2 PID: 123 Comm: kworker/2:3 Tainted: G U 5.4.68 #10 [ 21.333687] ACPI: Preparing to enter system sleep state S5 [ 21.337669] Workqueue: events_power_efficient rt5682_jack_detect_handler [snd_soc_rt5682] [ 21.337671] RIP: 0010:rt5682_jack_detect_handler+0x6c/0x279 [snd_soc_rt5682] Fixes: a50067d ('ASoC: rt5682: split i2c driver into separate module') Signed-off-by: Jairaj Arava <[email protected]> Signed-off-by: Sathyanarayana Nujella <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Shuming Fan <[email protected]> Signed-off-by: Ranjani Sridharan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit c5c97ca ] The ubsan reported the following error. It was because sample's raw data missed u32 padding at the end. So it broke the alignment of the array after it. The raw data contains an u32 size prefix so the data size should have an u32 padding after 8-byte aligned data. 27: Sample parsing :util/synthetic-events.c:1539:4: runtime error: store to misaligned address 0x62100006b9bc for type '__u64' (aka 'unsigned long long'), which requires 8 byte alignment 0x62100006b9bc: note: pointer points here 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13 #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8 #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9 #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9 #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9 #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4 #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9 #7 0x56153264e796 in run_builtin perf.c:312:11 #8 0x56153264cf03 in handle_internal_command perf.c:364:8 #9 0x56153264e47d in run_argv perf.c:408:2 #10 0x56153264c9a9 in main perf.c:538:3 #11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc) #12 0x561532596828 in _start ... SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use util/synthetic-events.c:1539:4 in Fixes: 045f8cd ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 4d14c5c upstream Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 #16 do_syscall_64 at ffffffffa4a052eb #17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes #16 normal_work_helper at ffffffffc03b706c #17 process_one_work at ffffffffa4aba4e4 #18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: David Sterba <[email protected]> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit f06391c upstream. [ 6684.493350] Unable to handle kernel paging request at virtual address ffff800011c5b0f0 [ 6684.498531] mmc0: card 0001 removed [ 6684.501556] Mem abort info: [ 6684.509681] ESR = 0x96000047 [ 6684.512786] EC = 0x25: DABT (current EL), IL = 32 bits [ 6684.518394] SET = 0, FnV = 0 [ 6684.521707] EA = 0, S1PTW = 0 [ 6684.524998] Data abort info: [ 6684.528236] ISV = 0, ISS = 0x00000047 [ 6684.532986] CM = 0, WnR = 1 [ 6684.536129] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081b22000 [ 6684.543923] [ffff800011c5b0f0] pgd=00000000bffff003, p4d=00000000bffff003, pud=00000000bfffe003, pmd=00000000900e1003, pte=0000000000000000 [ 6684.557915] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 6684.564240] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine rng_core authenc libdes crct10dif_ce flexcan can_dev caam error [last unloaded: mmc_core] [ 6684.587281] CPU: 0 PID: 79138 Comm: kworker/0:3H Not tainted 5.10.9-01410-g3ba33182767b-dirty #10 [ 6684.596160] Hardware name: Freescale i.MX8DXL EVK (DT) [ 6684.601320] Workqueue: kblockd blk_mq_run_work_fn [ 6684.606094] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 6684.612286] pc : cqhci_request+0x148/0x4e8 [cqhci] ^GMessage from syslogd@ at Thu Jan 1 01:51:24 1970 ...[ 6684.617085] lr : cqhci_request+0x314/0x4e8 [cqhci] [ 6684.626734] sp : ffff80001243b9f0 [ 6684.630049] x29: ffff80001243b9f0 x28: ffff00002c3dd000 [ 6684.635367] x27: 0000000000000001 x26: 0000000000000001 [ 6684.640690] x25: ffff00002c451000 x24: 000000000000000f [ 6684.646007] x23: ffff000017e71c80 x22: ffff00002c451000 [ 6684.651326] x21: ffff00002c0f3550 x20: ffff00002c0f3550 [ 6684.656651] x19: ffff000017d46880 x18: ffff00002cea1500 [ 6684.661977] x17: 0000000000000000 x16: 0000000000000000 [ 6684.667294] x15: 000001ee628e3ed1 x14: 0000000000000278 [ 6684.672610] x13: 0000000000000001 x12: 0000000000000001 [ 6684.677927] x11: 0000000000000000 x10: 0000000000000000 [ 6684.683243] x9 : 000000000000002b x8 : 0000000000001000 [ 6684.688560] x7 : 0000000000000010 x6 : ffff00002c0f3678 [ 6684.693886] x5 : 000000000000000f x4 : ffff800011c5b000 [ 6684.699211] x3 : 000000000002d988 x2 : 0000000000000008 [ 6684.704537] x1 : 00000000000000f0 x0 : 0002d9880008102f [ 6684.709854] Call trace: [ 6684.712313] cqhci_request+0x148/0x4e8 [cqhci] [ 6684.716803] mmc_cqe_start_req+0x58/0x68 [mmc_core] [ 6684.721698] mmc_blk_mq_issue_rq+0x460/0x810 [mmc_block] [ 6684.727018] mmc_mq_queue_rq+0x118/0x2b0 [mmc_block] The problem occurs when cqhci_request() get called after cqhci_disable() as it leads to access of allocated memory that has already been freed. Let's fix the problem by calling cqhci_disable() a bit later in the remove path. Signed-off-by: Frank Li <[email protected]> Diagnosed-by: Adrian Hunter <[email protected]> Acked-by: Adrian Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Fixes: f690f44 ("mmc: mmc: Enable CQE's") Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…tances commit cad83c9 upstream. As syzbot reported, there is an use-after-free issue during f2fs recovery: Use-after-free write at 0xffff88823bc16040 (in kfence-#10): kmem_cache_destroy+0x1f/0x120 mm/slab_common.c:486 f2fs_recover_fsync_data+0x75b0/0x8380 fs/f2fs/recovery.c:869 f2fs_fill_super+0x9393/0xa420 fs/f2fs/super.c:3945 mount_bdev+0x26c/0x3a0 fs/super.c:1367 legacy_get_tree+0xea/0x180 fs/fs_context.c:592 vfs_get_tree+0x86/0x270 fs/super.c:1497 do_new_mount fs/namespace.c:2905 [inline] path_mount+0x196f/0x2be0 fs/namespace.c:3235 do_mount fs/namespace.c:3248 [inline] __do_sys_mount fs/namespace.c:3456 [inline] __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3433 do_syscall_64+0x3f/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is multi f2fs filesystem instances can race on accessing global fsync_entry_slab pointer, result in use-after-free issue of slab cache, fixes to init/destroy this slab cache only once during module init/destroy procedure to avoid this issue. Reported-by: [email protected] Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 767c94c ] With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports below warning: [ 166.059415] ============================================ [ 166.059416] WARNING: possible recursive locking detected [ 166.059418] 5.15.0-wt-ath+ #10 Tainted: G W O [ 166.059420] -------------------------------------------- [ 166.059421] kworker/0:2/116 is trying to acquire lock: [ 166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059440] but task is already holding lock: [ 166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k] [ 166.059491] other info that might help us debug this: [ 166.059492] Possible unsafe locking scenario: [ 166.059493] CPU0 [ 166.059494] ---- [ 166.059495] lock(&srng->lock); [ 166.059498] lock(&srng->lock); [ 166.059500] *** DEADLOCK *** [ 166.059501] May be due to missing lock nesting notation [ 166.059502] 3 locks held by kworker/0:2/116: [ 166.059504] #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660 [ 166.059511] #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660 [ 166.059517] #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k] [ 166.059532] stack backtrace: [ 166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G W O 5.15.0-wt-ath+ #10 [ 166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019 [ 166.059539] Workqueue: events free_obj_work [ 166.059543] Call Trace: [ 166.059545] <IRQ> [ 166.059547] dump_stack_lvl+0x56/0x7b [ 166.059552] __lock_acquire+0xb9a/0x1a50 [ 166.059556] lock_acquire+0x1e2/0x330 [ 166.059560] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059571] _raw_spin_lock_bh+0x33/0x70 [ 166.059574] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059584] ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059594] ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k] [ 166.059605] ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k] [ 166.059618] ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k] [ 166.059632] ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k] [ 166.059643] ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k] [ 166.059655] ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci] [ 166.059659] __napi_poll+0x28/0x230 [ 166.059664] net_rx_action+0x285/0x310 [ 166.059668] __do_softirq+0xe6/0x4d2 [ 166.059672] irq_exit_rcu+0xd2/0xf0 [ 166.059675] common_interrupt+0xa5/0xc0 [ 166.059678] </IRQ> [ 166.059679] <TASK> [ 166.059680] asm_common_interrupt+0x1e/0x40 [ 166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a [ 166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206 [ 166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006 [ 166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001 [ 166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001 [ 166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840 [ 166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001 [ 166.059704] free_debug_processing+0x257/0x3d0 [ 166.059708] ? free_obj_work+0x1f5/0x250 [ 166.059712] __slab_free+0x374/0x5a0 [ 166.059718] ? kmem_cache_free+0x2e1/0x370 [ 166.059721] ? free_obj_work+0x1f5/0x250 [ 166.059724] kmem_cache_free+0x2e1/0x370 [ 166.059727] free_obj_work+0x1f5/0x250 [ 166.059731] process_one_work+0x28b/0x660 [ 166.059735] ? process_one_work+0x660/0x660 [ 166.059738] worker_thread+0x37/0x390 [ 166.059741] ? process_one_work+0x660/0x660 [ 166.059743] kthread+0x176/0x1a0 [ 166.059746] ? set_kthread_struct+0x40/0x40 [ 166.059749] ret_from_fork+0x22/0x30 [ 166.059754] </TASK> Since these two lockes are both initialized in ath11k_hal_srng_setup, they are assigned with the same key. As a result lockdep suspects that the task is trying to acquire the same lock (due to same key) while already holding it, and thus reports the DEADLOCK warning. However as they are different spinlock instances, the warning is false positive. On the other hand, even no dead lock indeed, this is a major issue for upstream regression testing as it disables lockdep functionality. Fix it by assigning separate lock class key for each srng->lock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 6b9dbed ] pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below: CPU0 CPU1 CPU2 ---- ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key); lock(&port->lock); lock(console_owner); As commit dbdda84 ("printk: Add console owner and waiter logic to load balance console writes") said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant. Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided. Syzbot reported the following lockdep error: ====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock: ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023 but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock); tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...] -> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key); call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner); vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 -> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 [inline] <-- lock(console_owner); vprintk_emit+0x307/0x470 kernel/printk/printk.c:2023 vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 fail_dump lib/fault-inject.c:45 [inline] should_fail+0x67b/0x7c0 lib/fault-inject.c:144 __should_failslab+0x152/0x1c0 mm/failslab.c:33 should_failslab+0x5/0x10 mm/slab_common.c:1224 slab_pre_alloc_hook mm/slab.h:468 [inline] slab_alloc_node mm/slub.c:2723 [inline] slab_alloc mm/slub.c:2807 [inline] __kmalloc+0x72/0x300 mm/slub.c:3871 kmalloc include/linux/slab.h:582 [inline] tty_buffer_alloc+0x23f/0x2a0 drivers/tty/tty_buffer.c:175 __tty_buffer_request_room+0x156/0x2a0 drivers/tty/tty_buffer.c:273 tty_insert_flip_string_fixed_flag+0x93/0x250 drivers/tty/tty_buffer.c:318 tty_insert_flip_string include/linux/tty_flip.h:37 [inline] pty_write+0x126/0x1f0 drivers/tty/pty.c:122 <-- lock(&port->lock); n_tty_write+0xa7a/0xfc0 drivers/tty/n_tty.c:2356 do_tty_write drivers/tty/tty_io.c:961 [inline] tty_write+0x512/0x930 drivers/tty/tty_io.c:1045 __vfs_write+0x76/0x100 fs/read_write.c:494 [...] other info that might help us debug this: Chain exists of: console_owner --> &port_lock_key --> &port->lock Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: b6da31b ("tty: Fix data race in tty_insert_flip_string_fixed_flag") Signed-off-by: Qi Zheng <[email protected]> Acked-by: Jiri Slaby <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Cc: Akinobu Mita <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Steven Rostedt (Google) <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 93c660c ] ASAN reports an use-after-free in btf_dump_name_dups: ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928 READ of size 2 at 0xffff927006db thread T0 #0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614) #1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127 #2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143 #3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212 #4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525 #5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552 #6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567 #7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912 #8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798 #9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282 #10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236 #11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #15 0xaaaab5d65990 (test_progs+0x185990) 0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0) freed by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) #1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 #2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 #3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 #4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 #5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 #6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032 #7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232 #8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #12 0xaaaab5d65990 (test_progs+0x185990) previously allocated by thread T0 here: #0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4) #1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191 #2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163 #3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106 #4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157 #5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519 #6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070 #7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102 #8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162 #9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875 #10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062 #11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697 #12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308 #13 0xaaaab5d65990 (test_progs+0x185990) The reason is that the key stored in hash table name_map is a string address, and the string memory is allocated by realloc() function, when the memory is resized by realloc() later, the old memory may be freed, so the address stored in name_map references to a freed memory, causing use-after-free. Fix it by storing duplicated string address in name_map. Fixes: 919d2b1 ("libbpf: Allow modification of BTF and add btf__add_str API") Signed-off-by: Xu Kuohai <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

…g the sock [ Upstream commit 3cf7203 ] There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 #1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d #2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 #3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b #4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb #5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 #6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] #8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 #9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 #10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 #11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 #12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde #13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b #14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 #15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a #16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 #17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca #18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock. Reported-by: Jianlin Shi <[email protected]> Suggested-by: Jakub Sitnicki <[email protected]> Fixes: 6a93cc9 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4e264be ] When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <[email protected]> Signed-off-by: Stefan Assmann <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Luca Abeni reported this: | BUG: scheduling while atomic: kworker/u8:2/15203/0x00000003 | CPU: 1 PID: 15203 Comm: kworker/u8:2 Not tainted 4.19.1-rt3 #10 | Call Trace: | rt_spin_lock+0x3f/0x50 | gen6_read32+0x45/0x1d0 [i915] | g4x_get_vblank_counter+0x36/0x40 [i915] | trace_event_raw_event_i915_pipe_update_start+0x7d/0xf0 [i915] The tracing events use trace_i915_pipe_update_start() among other events use functions acquire spinlock_t locks which are transformed into sleeping locks on PREEMPT_RT. A few trace points use intel_get_crtc_scanline(), others use ->get_vblank_counter() wich also might acquire a sleeping locks on PREEMPT_RT. At the time the arguments are evaluated within trace point, preemption is disabled and so the locks must not be acquired on PREEMPT_RT. Based on this I don't see any other way than disable trace points on PREMPT_RT. Reported-by: Luca Abeni <[email protected]> Cc: Steven Rostedt <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]>

[ Upstream commit 99d4850 ] Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 #2 0x556701d70589 in perf_env__cpuid util/env.c:465 #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 #5 0x556701d8f78b in evsel__config util/evsel.c:1366 #6 0x556701ef5872 in evlist__config util/record.c:108 #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 #8 0x556701cacd07 in run_test tests/builtin-test.c:236 #9 0x556701cacfac in test_and_print tests/builtin-test.c:265 #10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 #11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 #12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 #13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 #14 0x556701d3be90 in run_argv tools/perf/perf.c:421 #15 0x556701d3c3f8 in main tools/perf/perf.c:537 #16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b684c09 ] ppc_save_regs() skips one stack frame while saving the CPU register states. Instead of saving current R1, it pulls the previous stack frame pointer. When vmcores caused by direct panic call (such as `echo c > /proc/sysrq-trigger`), are debugged with gdb, gdb fails to show the backtrace correctly. On further analysis, it was found that it was because of mismatch between r1 and NIP. GDB uses NIP to get current function symbol and uses corresponding debug info of that function to unwind previous frames, but due to the mismatching r1 and NIP, the unwinding does not work, and it fails to unwind to the 2nd frame and hence does not show the backtrace. GDB backtrace with vmcore of kernel without this patch: --------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=<optimized out>, newregs=0xc000000004f8f8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=<optimized out>) at kernel/kexec_core.c:974 #2 0x0000000000000063 in ?? () #3 0xc000000003579320 in ?? () --------- Further analysis revealed that the mismatch occurred because "ppc_save_regs" was saving the previous stack's SP instead of the current r1. This patch fixes this by storing current r1 in the saved pt_regs. GDB backtrace with vmcore of patched kernel: -------- (gdb) bt #0 0xc0000000002a53e8 in crash_setup_regs (oldregs=0x0, newregs=0xc00000000670b8d8) at ./arch/powerpc/include/asm/kexec.h:69 #1 __crash_kexec (regs=regs@entry=0x0) at kernel/kexec_core.c:974 #2 0xc000000000168918 in panic (fmt=fmt@entry=0xc000000001654a60 "sysrq triggered crash\n") at kernel/panic.c:358 #3 0xc000000000b735f8 in sysrq_handle_crash (key=<optimized out>) at drivers/tty/sysrq.c:155 #4 0xc000000000b742cc in __handle_sysrq (key=key@entry=99, check_mask=check_mask@entry=false) at drivers/tty/sysrq.c:602 #5 0xc000000000b7506c in write_sysrq_trigger (file=<optimized out>, buf=<optimized out>, count=2, ppos=<optimized out>) at drivers/tty/sysrq.c:1163 #6 0xc00000000069a7bc in pde_write (ppos=<optimized out>, count=<optimized out>, buf=<optimized out>, file=<optimized out>, pde=0xc00000000362cb40) at fs/proc/inode.c:340 #7 proc_reg_write (file=<optimized out>, buf=<optimized out>, count=<optimized out>, ppos=<optimized out>) at fs/proc/inode.c:352 #8 0xc0000000005b3bbc in vfs_write (file=file@entry=0xc000000006aa6b00, buf=buf@entry=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=count@entry=2, pos=pos@entry=0xc00000000670bda0) at fs/read_write.c:582 #9 0xc0000000005b4264 in ksys_write (fd=<optimized out>, buf=0x61f498b4f60 <error: Cannot access memory at address 0x61f498b4f60>, count=2) at fs/read_write.c:637 #10 0xc00000000002ea2c in system_call_exception (regs=0xc00000000670be80, r0=<optimized out>) at arch/powerpc/kernel/syscall.c:171 #11 0xc00000000000c270 in system_call_vectored_common () at arch/powerpc/kernel/interrupt_64.S:192 -------- Nick adds: So this now saves regs as though it was an interrupt taken in the caller, at the instruction after the call to ppc_save_regs, whereas previously the NIP was there, but R1 came from the caller's caller and that mismatch is what causes gdb's dwarf unwinder to go haywire. Signed-off-by: Aditya Gupta <[email protected]> Fixes: d16a58f ("powerpc: Improve ppc_save_regs()") Reivewed-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

commit 8785436 upstream. Shift operation of 'exp' and 'shift' variables exceeds the maximum number of shift values in the u32 range leading to UBSAN shift-out-of-bounds. ... [ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50 [ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int' [ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10 [ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023 [ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh] [ 6.120687] Call Trace: [ 6.120690] <TASK> [ 6.120694] dump_stack_lvl+0x48/0x70 [ 6.120704] dump_stack+0x10/0x20 [ 6.120707] ubsan_epilogue+0x9/0x40 [ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170 [ 6.120720] ? psi_group_change+0x25f/0x4b0 [ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh] [ 6.120739] get_input_rep+0x57/0x340 [amd_sfh] [ 6.120748] ? __schedule+0xba7/0x1b60 [ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh] [ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh] [ 6.120772] process_one_work+0x229/0x430 [ 6.120780] worker_thread+0x4a/0x3c0 [ 6.120784] ? __pfx_worker_thread+0x10/0x10 [ 6.120788] kthread+0xf7/0x130 [ 6.120792] ? __pfx_kthread+0x10/0x10 [ 6.120795] ret_from_fork+0x29/0x50 [ 6.120804] </TASK> ... Fix this by adding the condition to validate shift ranges. Fixes: 93ce5e0 ("HID: amd_sfh: Implement SFH1.1 functionality") Cc: [email protected] Tested-by: Kai-Heng Feng <[email protected]> Signed-off-by: Basavaraj Natikar <[email protected]> Signed-off-by: Akshata MukundShetty <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 7962ef1 ] In 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") it only was freeing if strcmp(evsel->tp_format->system, "syscalls") returned zero, while the corresponding initialization of evsel->priv was being performed if it was _not_ zero, i.e. if the tp system wasn't 'syscalls'. Just stop looking for that and free it if evsel->priv was set, which should be equivalent. Also use the pre-existing evsel_trace__delete() function. This resolves these leaks, detected with: $ make EXTRA_CFLAGS="-fsanitize=address" BUILD_BPF_SKEL=1 CORESIGHT=1 O=/tmp/build/perf-tools-next -C tools/perf install-bin ================================================================= ==481565==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540e8b in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3212 #7 0x540e8b in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540e8b in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f7343cba097 in calloc (/lib64/libasan.so.8+0xba097) #1 0x987966 in zalloc (/home/acme/bin/perf+0x987966) #2 0x52f9b9 in evsel_trace__new /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:307 #3 0x52f9b9 in evsel__syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:333 #4 0x52f9b9 in evsel__init_raw_syscall_tp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:458 #5 0x52f9b9 in perf_evsel__raw_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:480 #6 0x540dd1 in trace__add_syscall_newtp /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3205 #7 0x540dd1 in trace__run /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:3891 #8 0x540dd1 in cmd_trace /home/acme/git/perf-tools-next/tools/perf/builtin-trace.c:5156 #9 0x5ef262 in run_builtin /home/acme/git/perf-tools-next/tools/perf/perf.c:323 #10 0x4196da in handle_internal_command /home/acme/git/perf-tools-next/tools/perf/perf.c:377 #11 0x4196da in run_argv /home/acme/git/perf-tools-next/tools/perf/perf.c:421 #12 0x4196da in main /home/acme/git/perf-tools-next/tools/perf/perf.c:537 #13 0x7f7342c4a50f in __libc_start_call_main (/lib64/libc.so.6+0x2750f) SUMMARY: AddressSanitizer: 80 byte(s) leaked in 2 allocation(s). [root@quaco ~]# With this we plug all leaks with "perf trace sleep 1". Fixes: 3cb4d5e ("perf trace: Free syscall tp fields in evsel->priv") Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Riccardo Mancini <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 314ded5 upstream. The kernel IRQ system needs the irq affinity notifier to be clear before attempting to free the irq, see WARN_ON log below. On a normal driver unload we don't have this issue since we do the complete cleanup of the irq resources. To fix this, put the important resources cleanup in a helper function and use it in both normal driver unload and shutdown flows. [ 4497.498434] ------------[ cut here ]------------ [ 4497.498726] WARNING: CPU: 0 PID: 9 at kernel/irq/manage.c:2034 free_irq+0x295/0x340 [ 4497.499193] Modules linked in: [ 4497.499386] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.4.0-rc4+ #10 [ 4497.499876] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014 [ 4497.500518] Workqueue: events do_poweroff [ 4497.500849] RIP: 0010:free_irq+0x295/0x340 [ 4497.501132] Code: 85 c0 0f 84 1d ff ff ff 48 89 ef ff d0 0f 1f 00 e9 10 ff ff ff 0f 0b e9 72 ff ff ff 49 8d 7f 28 ff d0 0f 1f 00 e9 df fd ff ff <0f> 0b 48 c7 80 c0 008 [ 4497.502269] RSP: 0018:ffffc90000053da0 EFLAGS: 00010282 [ 4497.502589] RAX: ffff888100949600 RBX: ffff88810330b948 RCX: 0000000000000000 [ 4497.503035] RDX: ffff888100949600 RSI: ffff888100400490 RDI: 0000000000000023 [ 4497.503472] RBP: ffff88810330c7e0 R08: ffff8881004005d0 R09: ffffffff8273a260 [ 4497.503923] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881009ae000 [ 4497.504359] R13: ffff8881009ae148 R14: 0000000000000000 R15: ffff888100949600 [ 4497.504804] FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 4497.505302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4497.505671] CR2: 00007fce98806298 CR3: 000000000262e005 CR4: 0000000000370ef0 [ 4497.506104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4497.506540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4497.507002] Call Trace: [ 4497.507158] <TASK> [ 4497.507299] ? free_irq+0x295/0x340 [ 4497.507522] ? __warn+0x7c/0x130 [ 4497.507740] ? free_irq+0x295/0x340 [ 4497.507963] ? report_bug+0x171/0x1a0 [ 4497.508197] ? handle_bug+0x3c/0x70 [ 4497.508417] ? exc_invalid_op+0x17/0x70 [ 4497.508662] ? asm_exc_invalid_op+0x1a/0x20 [ 4497.508926] ? free_irq+0x295/0x340 [ 4497.509146] mlx5_irq_pool_free_irqs+0x48/0x90 [ 4497.509421] mlx5_irq_table_free_irqs+0x38/0x50 [ 4497.509714] mlx5_core_eq_free_irqs+0x27/0x40 [ 4497.509984] shutdown+0x7b/0x100 [ 4497.510184] pci_device_shutdown+0x30/0x60 [ 4497.510440] device_shutdown+0x14d/0x240 [ 4497.510698] kernel_power_off+0x30/0x70 [ 4497.510938] process_one_work+0x1e6/0x3e0 [ 4497.511183] worker_thread+0x49/0x3b0 [ 4497.511407] ? __pfx_worker_thread+0x10/0x10 [ 4497.511679] kthread+0xe0/0x110 [ 4497.511879] ? __pfx_kthread+0x10/0x10 [ 4497.512114] ret_from_fork+0x29/0x50 [ 4497.512342] </TASK> Fixes: 9c2d080 ("net/mlx5: Free irqs only on shutdown callback") Signed-off-by: Saeed Mahameed <[email protected]> Reviewed-by: Shay Drory <[email protected]> Signed-off-by: Mathieu Tortuyaux <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Boris Brezillon added 21 commits February 12, 2015 12:24

drm: atmel-hlcdc: add support for at91sam9x5 SoCs

9bf35f9

Describe capabilities of the HLCDC IP found on at91sam9x5 SoCs and add a new entry to the atmel_hlcdc_of_match table. Signed-off-by: Boris Brezillon <[email protected]>

mfd: atmel-hlcdc: Add support for at91sam9x5 SoCs

b7a2b22

Add an entry in the atmel_hlcdc_match table to support the HLCDC IP available on at91sam9x5 SoCs Signed-off-by: Boris Brezillon <[email protected]>

ARM: at91/dt: add at91sam9x5 Display Module dtsi

c2beb68

Signed-off-by: Boris BREZILLON <[email protected]>

ARM: at91/dt: define hlcdc node in at91sam9x5_lcd.dtsi

668276b

Signed-off-by: Boris BREZILLON <[email protected]>

ARM: at91/dt: include lcd dtsi in at91sam9x5 dtsis

4fcb685

Signed-off-by: Boris BREZILLON <[email protected]>

ARM: at91/dt: enable lcd support for at91sam9x5 SoCs

4a18eaf

Signed-off-by: Boris BREZILLON <[email protected]>

drm: atmel-hlcdc: add support for at91sam9n12 SoC

8cb6fcf

Describe capabilities of the HLCDC IP found on at91sam9n12 SoC and add a new entry to the atmel_hlcdc_of_match table. Signed-off-by: Boris Brezillon <[email protected]>

mfd: atmel-hlcdc: Add support for at91sam9n12 SoC

c4c9daa

Add an entry in the atmel_hlcdc_match table to support the HLCDC IP available on at91sam9n12 SoC. Signed-off-by: Boris Brezillon <[email protected]>

drm: atmel-hlcdc: add support for sama5d4 SoCs

2eb674a

Describe capabilities of the HLCDC IP found on sama5d4 SoCs and add a new entry to the atmel_hlcdc_of_match table. Signed-off-by: Boris Brezillon <[email protected]>

mfd: atmel-hlcdc: Add support for sama5d4 SoCs

b5dd6ed

Add an entry in the atmel_hlcdc_match table to support the HLCDC IP available on sama5d4 SoCs. Signed-off-by: Boris Brezillon <[email protected]>

ARM: at91/dt: sama5d4: rename lcd_clk into lcdc_clk

579bfa3

Rename lcd_clk into lcdc_clk to be consistent with sama5d3 clock definitions. Signed-off-by: Boris BREZILLON <[email protected]>

ARM: at91/dt: sama5d4: fix lcdck parent clk

6cc2344

lcdck takes mck (not smd) as its parent. Signed-off-by: Boris BREZILLON <[email protected]>

ARM: at91/dt: sama5d4: add lcdc pin definitions

5d9025b

Add LCDC pin definitions. Signed-off-by: Boris BREZILLON <[email protected]>

ARM: at91/dt: sama5d4: add hlcdc node

20f867a

Add HLCDC node. Signed-off-by: Boris BREZILLON <[email protected]>

drm: panel: add shelly panel support

bd4bb15

!!!! I'm not sure about the LCD panel properties, these values should be checked with atmel. Signed-off-by: Boris BREZILLON <[email protected]>

ARM: dt: add PDA's TM7000 display module dtsi

6b6b793

At the moment only the LCD panel is defined. Other components should be added later. Signed-off-by: Boris BREZILLON <[email protected]>

ARM: at91/dt: sama5d4: enable panel related nodes in sama5d4ek dts

6e55aa2

Include pda-tm7000 display module dtsi and enable the HLCDC and panel related devices. Signed-off-by: Boris BREZILLON <[email protected]>

ARM: at91/dt: replace lcd_bus node by hlcdc node

28cf7cd

The lcd_bus and hlcdc cannot be both defined at the same time because they are using the same resources. Remove old lcb_bus node and then enable the hlcdc node. Signed-off-by: Boris BREZILLON <[email protected]>

drm: panel: add bus_format to sca07010_bfn_lnn panel desc

38095f5

Signed-off-by: Boris Brezillon <[email protected]>

ARM: at91/dt: add sama5d3xek + PDA7 board files

668a3fd

Signed-off-by: Boris Brezillon <[email protected]>

noglitch closed this May 13, 2015

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

HLCDC stuff for linux-a91-3.18 #10

HLCDC stuff for linux-a91-3.18 #10

bbrezillon commented Feb 12, 2015

noglitch commented May 13, 2015

HLCDC stuff for linux-a91-3.18 #10

HLCDC stuff for linux-a91-3.18 #10

Conversation

bbrezillon commented Feb 12, 2015

noglitch commented May 13, 2015