Add SPI Full Duplex DMA test

hil-test/Cargo.toml

@@ -28,6 +28,10 @@ harness = false
 name    = "spi_full_duplex"
 harness = false
 
+[[test]]
+name    = "spi_full_duplex_dma"
+harness = false
+
 [[test]]
 name    = "rsa"
 harness = false

hil-test/tests/spi_full_duplex.rs

@@ -62,7 +62,8 @@ mod tests {
     }
 
     #[test]
-    fn test_symestric_transfer(mut ctx: Context) {
+    #[timeout(3)]
+    fn test_symmetric_transfer(mut ctx: Context) {
         let write = [0xde, 0xad, 0xbe, 0xef];
         let mut read: [u8; 4] = [0x00u8; 4];
 
@@ -72,7 +73,8 @@ mod tests {
     }
 
     #[test]
-    fn test_asymestric_transfer(mut ctx: Context) {
+    #[timeout(3)]
+    fn test_asymmetric_transfer(mut ctx: Context) {
         let write = [0xde, 0xad, 0xbe, 0xef];
         let mut read: [u8; 4] = [0x00; 4];
 
@@ -83,7 +85,8 @@ mod tests {
     }
 
     #[test]
-    fn test_symestric_transfer_huge_buffer(mut ctx: Context) {
+    #[timeout(3)]
+    fn test_symmetric_transfer_huge_buffer(mut ctx: Context) {
         let mut write = [0x55u8; 4096];
         for byte in 0..write.len() {
             write[byte] = byte as u8;
@@ -96,7 +99,7 @@ mod tests {
 
     #[test]
     #[timeout(3)]
-    fn test_symestric_transfer_huge_buffer_no_alloc(mut ctx: Context) {
+    fn test_symmetric_transfer_huge_buffer_no_alloc(mut ctx: Context) {
         let mut write = [0x55u8; 4096];
         for byte in 0..write.len() {
             write[byte] = byte as u8;

hil-test/tests/spi_full_duplex_dma.rs

@@ -0,0 +1,172 @@
+//! SPI Full Duplex DMA Test
+//!
+//! Folowing pins are used:
+//! SCLK    GPIO0
+//! MISO    GPIO2
+//! MOSI    GPIO4
+//! CS      GPIO5
+//!
+//! Connect MISO (GPIO2) and MOSI (GPIO4) pins.
+
+//% CHIPS: esp32 esp32c2 esp32c3 esp32c6 esp32h2 esp32s2 esp32s3
+
+#![no_std]
+#![no_main]
+
+use defmt_rtt as _;
+use esp_backtrace as _;
+use esp_hal::{
+    clock::ClockControl,
+    dma::{Dma, DmaPriority},
+    dma_buffers,
+    gpio::IO,
+    peripherals::Peripherals,
+    prelude::*,
+    spi::{
+        master::{prelude::*, Spi},
+        SpiMode,
+    },
+};
+
+#[cfg(test)]
+#[embedded_test::tests]
+mod tests {
+    use defmt::assert_eq;
+
+    use super::*;
+
+    #[test]
+    #[timeout(3)]
+    fn test_symmetric_dma_transfer() {
+        const DMA_BUFFER_SIZE: usize = 4;
+
+        let peripherals = Peripherals::take();
+        let system = peripherals.SYSTEM.split();
+        let clocks = ClockControl::boot_defaults(system.clock_control).freeze();
+
+        let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
+        let sclk = io.pins.gpio0;
+        let miso = io.pins.gpio2;
+        let mosi = io.pins.gpio4;
+        let cs = io.pins.gpio5;
+
+        let dma = Dma::new(peripherals.DMA);
+
+        #[cfg(any(feature = "esp32", feature = "esp32s2"))]
+        let dma_channel = dma.spi2channel;
+        #[cfg(not(any(feature = "esp32", feature = "esp32s2")))]
+        let dma_channel = dma.channel0;
+
+        let (tx_buffer, mut tx_descriptors, rx_buffer, mut rx_descriptors) =
+            dma_buffers!(DMA_BUFFER_SIZE);
+
+        let mut spi = Spi::new(peripherals.SPI2, 100.kHz(), SpiMode::Mode0, &clocks)
+            .with_pins(Some(sclk), Some(mosi), Some(miso), Some(cs))
+            .with_dma(dma_channel.configure(
+                false,
+                &mut tx_descriptors,
+                &mut rx_descriptors,
+                DmaPriority::Priority0,
+            ));
+
+        // DMA buffer require a static life-time
+        let mut send = tx_buffer;
+        let mut receive = rx_buffer;
+
+        send.copy_from_slice(&[0xde, 0xad, 0xbe, 0xef]);
+
+        let transfer = spi.dma_transfer(&mut send, &mut receive).unwrap();
+        transfer.wait().unwrap();
+        assert_eq!(send, receive);
+    }
+
+    #[test]
+    #[timeout(3)]
+    fn test_asymmetric_dma_transfer() {
+        let peripherals = Peripherals::take();
+        let system = peripherals.SYSTEM.split();
+        let clocks = ClockControl::boot_defaults(system.clock_control).freeze();
+
+        let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
+        let sclk = io.pins.gpio0;
+        let miso = io.pins.gpio2;
+        let mosi = io.pins.gpio4;
+        let cs = io.pins.gpio5;
+
+        let dma = Dma::new(peripherals.DMA);
+
+        #[cfg(any(feature = "esp32", feature = "esp32s2"))]
+        let dma_channel = dma.spi2channel;
+        #[cfg(not(any(feature = "esp32", feature = "esp32s2")))]
+        let dma_channel = dma.channel0;
+
+        let (tx_buffer, mut tx_descriptors, rx_buffer, mut rx_descriptors) = dma_buffers!(4, 2);
+
+        let mut spi = Spi::new(peripherals.SPI2, 100.kHz(), SpiMode::Mode0, &clocks)
+            .with_pins(Some(sclk), Some(mosi), Some(miso), Some(cs))
+            .with_dma(dma_channel.configure(
+                false,
+                &mut tx_descriptors,
+                &mut rx_descriptors,
+                DmaPriority::Priority0,
+            ));
+
+        // DMA buffer require a static life-time
+        let mut send = tx_buffer;
+        let mut receive = rx_buffer;
+
+        send.copy_from_slice(&[0xde, 0xad, 0xbe, 0xef]);
+
+        let transfer = spi.dma_transfer(&mut send, &mut receive).unwrap();
+        transfer.wait().unwrap();
+        assert_eq!(send[0], receive[0]);
+    }
+
+    #[test]
+    #[timeout(3)]
+    fn test_symmetric_dma_transfer_huge_buffer() {
+        const DMA_BUFFER_SIZE: usize = 4096;
+
+        let peripherals = Peripherals::take();
+        let system = peripherals.SYSTEM.split();
+        let clocks = ClockControl::boot_defaults(system.clock_control).freeze();
+
+        let io = IO::new(peripherals.GPIO, peripherals.IO_MUX);
+        let sclk = io.pins.gpio0;
+        let miso = io.pins.gpio2;
+        let mosi = io.pins.gpio4;
+        let cs = io.pins.gpio5;
+
+        let dma = Dma::new(peripherals.DMA);
+
+        #[cfg(any(feature = "esp32", feature = "esp32s2"))]
+        let dma_channel = dma.spi2channel;
+        #[cfg(not(any(feature = "esp32", feature = "esp32s2")))]
+        let dma_channel = dma.channel0;
+
+        let (tx_buffer, mut tx_descriptors, rx_buffer, mut rx_descriptors) =
+            dma_buffers!(DMA_BUFFER_SIZE);
+
+        let mut spi = Spi::new(peripherals.SPI2, 100.kHz(), SpiMode::Mode0, &clocks)
+            .with_pins(Some(sclk), Some(mosi), Some(miso), Some(cs))
+            .with_dma(dma_channel.configure(
+                false,
+                &mut tx_descriptors,
+                &mut rx_descriptors,
+                DmaPriority::Priority0,
+            ));
+
+        // DMA buffer require a static life-time
+        let mut send = tx_buffer;
+        let mut receive = rx_buffer;
+
+        send.copy_from_slice(&[0x55u8; 4096]);
+        for byte in 0..send.len() {
+            send[byte] = byte as u8;
+        }
+
+        let transfer = spi.dma_transfer(&mut send, &mut receive).unwrap();
+        transfer.wait().unwrap();
+        assert_eq!(send, receive);
+    }
+}