Split precompile constants out of individual modules #2081

crates/precompile/src/bls12_381/g1.rs

@@ -1,14 +1,9 @@
-use super::utils::{fp_from_bendian, fp_to_bytes, remove_padding, PADDED_FP_LENGTH};
+use super::utils::{fp_from_bendian, fp_to_bytes, remove_padding};
+use crate::bls12_381_const::{G1_INPUT_ITEM_LENGTH, G1_OUTPUT_LENGTH, PADDED_FP_LENGTH};
 use crate::PrecompileError;
 use blst::{blst_p1_affine, blst_p1_affine_in_g1, blst_p1_affine_on_curve};
 use primitives::Bytes;
 
-/// Length of each of the elements in a g1 operation input.
-pub(super) const G1_INPUT_ITEM_LENGTH: usize = 128;
-
-/// Output length of a g1 operation.
-const G1_OUTPUT_LENGTH: usize = 128;
-
 /// Encodes a G1 point in affine format into byte slice with padded elements.
 pub(super) fn encode_g1_point(input: *const blst_p1_affine) -> Bytes {
     let mut out = vec![0u8; G1_OUTPUT_LENGTH];

crates/precompile/src/bls12_381/g1_add.rs

@@ -1,4 +1,7 @@
-use super::g1::{encode_g1_point, extract_g1_input, G1_INPUT_ITEM_LENGTH};
+use super::g1::{encode_g1_point, extract_g1_input};
+use crate::bls12_381_const::{
+    G1_ADD_ADDRESS, G1_ADD_BASE_GAS_FEE, G1_ADD_INPUT_LENGTH, G1_INPUT_ITEM_LENGTH,
+};
 use crate::{u64_to_address, PrecompileWithAddress};
 use crate::{PrecompileError, PrecompileOutput, PrecompileResult};
 use blst::{
@@ -8,28 +11,21 @@ use primitives::Bytes;
 
 /// [EIP-2537](https://eips.ethereum.org/EIPS/eip-2537#specification) BLS12_G1ADD precompile.
 pub const PRECOMPILE: PrecompileWithAddress =
-    PrecompileWithAddress(u64_to_address(ADDRESS), g1_add);
-/// BLS12_G1ADD precompile address.
-pub const ADDRESS: u64 = 0x0b;
-/// Base gas fee for BLS12-381 g1_add operation.
-const BASE_GAS_FEE: u64 = 375;
-
-/// Input length of g1_add operation.
-const INPUT_LENGTH: usize = 256;
+    PrecompileWithAddress(u64_to_address(G1_ADD_ADDRESS), g1_add);
 
 /// G1 addition call expects `256` bytes as an input that is interpreted as byte
 /// concatenation of two G1 points (`128` bytes each).
 /// Output is an encoding of addition operation result - single G1 point (`128`
 /// bytes).
 /// See also: <https://eips.ethereum.org/EIPS/eip-2537#abi-for-g1-addition>
 pub(super) fn g1_add(input: &Bytes, gas_limit: u64) -> PrecompileResult {
-    if BASE_GAS_FEE > gas_limit {
+    if G1_ADD_BASE_GAS_FEE > gas_limit {
         return Err(PrecompileError::OutOfGas.into());
     }
 
-    if input.len() != INPUT_LENGTH {
+    if input.len() != G1_ADD_INPUT_LENGTH {
         return Err(PrecompileError::Other(format!(
-            "G1ADD input should be {INPUT_LENGTH} bytes, was {}",
+            "G1ADD input should be {G1_ADD_INPUT_LENGTH} bytes, was {}",
             input.len()
         ))
         .into());
@@ -54,5 +50,5 @@ pub(super) fn g1_add(input: &Bytes, gas_limit: u64) -> PrecompileResult {
     unsafe { blst_p1_to_affine(&mut p_aff, &p) };
 
     let out = encode_g1_point(&p_aff);
-    Ok(PrecompileOutput::new(BASE_GAS_FEE, out))
+    Ok(PrecompileOutput::new(G1_ADD_BASE_GAS_FEE, out))
 }

crates/precompile/src/bls12_381/g1_msm.rs

@@ -1,7 +1,11 @@
 use super::{
-    g1::{encode_g1_point, extract_g1_input, G1_INPUT_ITEM_LENGTH},
+    g1::{encode_g1_point, extract_g1_input},
     msm::msm_required_gas,
-    utils::{extract_scalar_input, NBITS, SCALAR_LENGTH},
+    utils::extract_scalar_input,
+};
+use crate::bls12_381_const::{
+    DISCOUNT_TABLE_G1_MSM, G1_INPUT_ITEM_LENGTH, G1_MSM_ADDRESS, G1_MSM_BASE_GAS_FEE,
+    G1_MSM_INPUT_LENGTH, NBITS, SCALAR_LENGTH,
 };
 use crate::{u64_to_address, PrecompileWithAddress};
 use crate::{PrecompileError, PrecompileOutput, PrecompileResult};
@@ -10,27 +14,7 @@ use primitives::Bytes;
 
 /// [EIP-2537](https://eips.ethereum.org/EIPS/eip-2537#specification) BLS12_G1MSM precompile.
 pub const PRECOMPILE: PrecompileWithAddress =
-    PrecompileWithAddress(u64_to_address(ADDRESS), g1_msm);
-
-/// BLS12_G1MSM precompile address.
-pub const ADDRESS: u64 = 0x0c;
-
-/// Base gas fee for BLS12-381 g1_mul operation.
-pub const BASE_GAS_FEE: u64 = 12000;
-
-/// Input length of g1_mul operation.
-pub const INPUT_LENGTH: usize = 160;
-
-/// Discounts table for G1 MSM as a vector of pairs `[k, discount]`.
-pub static DISCOUNT_TABLE: [u16; 128] = [
-    1000, 949, 848, 797, 764, 750, 738, 728, 719, 712, 705, 698, 692, 687, 682, 677, 673, 669, 665,
-    661, 658, 654, 651, 648, 645, 642, 640, 637, 635, 632, 630, 627, 625, 623, 621, 619, 617, 615,
-    613, 611, 609, 608, 606, 604, 603, 601, 599, 598, 596, 595, 593, 592, 591, 589, 588, 586, 585,
-    584, 582, 581, 580, 579, 577, 576, 575, 574, 573, 572, 570, 569, 568, 567, 566, 565, 564, 563,
-    562, 561, 560, 559, 558, 557, 556, 555, 554, 553, 552, 551, 550, 549, 548, 547, 547, 546, 545,
-    544, 543, 542, 541, 540, 540, 539, 538, 537, 536, 536, 535, 534, 533, 532, 532, 531, 530, 529,
-    528, 528, 527, 526, 525, 525, 524, 523, 522, 522, 521, 520, 520, 519,
-];
+    PrecompileWithAddress(u64_to_address(G1_MSM_ADDRESS), g1_msm);
 
 /// Implements EIP-2537 G1MSM precompile.
 /// G1 multi-scalar-multiplication call expects `160*k` bytes as an input that is interpreted
@@ -42,24 +26,24 @@ pub static DISCOUNT_TABLE: [u16; 128] = [
 /// See also: <https://eips.ethereum.org/EIPS/eip-2537#abi-for-g1-multiexponentiation>
 pub(super) fn g1_msm(input: &Bytes, gas_limit: u64) -> PrecompileResult {
     let input_len = input.len();
-    if input_len == 0 || input_len % INPUT_LENGTH != 0 {
+    if input_len == 0 || input_len % G1_MSM_INPUT_LENGTH != 0 {
         return Err(PrecompileError::Other(format!(
             "G1MSM input length should be multiple of {}, was {}",
-            INPUT_LENGTH, input_len
+            G1_MSM_INPUT_LENGTH, input_len
         ))
         .into());
     }
 
-    let k = input_len / INPUT_LENGTH;
-    let required_gas = msm_required_gas(k, &DISCOUNT_TABLE, BASE_GAS_FEE);
+    let k = input_len / G1_MSM_INPUT_LENGTH;
+    let required_gas = msm_required_gas(k, &DISCOUNT_TABLE_G1_MSM, G1_MSM_BASE_GAS_FEE);
     if required_gas > gas_limit {
         return Err(PrecompileError::OutOfGas.into());
     }
 
     let mut g1_points: Vec<blst_p1> = Vec::with_capacity(k);
     let mut scalars: Vec<u8> = Vec::with_capacity(k * SCALAR_LENGTH);
     for i in 0..k {
-        let slice = &input[i * INPUT_LENGTH..i * INPUT_LENGTH + G1_INPUT_ITEM_LENGTH];
+        let slice = &input[i * G1_MSM_INPUT_LENGTH..i * G1_MSM_INPUT_LENGTH + G1_INPUT_ITEM_LENGTH];
 
         // BLST batch API for p1_affines blows up when you pass it a point at infinity, so we must
         // filter points at infinity (and their corresponding scalars) from the input.
@@ -79,8 +63,8 @@ pub(super) fn g1_msm(input: &Bytes, gas_limit: u64) -> PrecompileResult {
 
         scalars.extend_from_slice(
             &extract_scalar_input(
-                &input[i * INPUT_LENGTH + G1_INPUT_ITEM_LENGTH
-                    ..i * INPUT_LENGTH + G1_INPUT_ITEM_LENGTH + SCALAR_LENGTH],
+                &input[i * G1_MSM_INPUT_LENGTH + G1_INPUT_ITEM_LENGTH
+                    ..i * G1_MSM_INPUT_LENGTH + G1_INPUT_ITEM_LENGTH + SCALAR_LENGTH],
             )?
             .b,
         );

crates/precompile/src/bls12_381/g2.rs

@@ -1,14 +1,9 @@
-use super::utils::{fp_from_bendian, fp_to_bytes, remove_padding, FP_LENGTH, PADDED_FP_LENGTH};
+use super::utils::{fp_from_bendian, fp_to_bytes, remove_padding};
+use crate::bls12_381_const::{FP_LENGTH, G2_INPUT_ITEM_LENGTH, G2_OUTPUT_LENGTH, PADDED_FP_LENGTH};
 use crate::PrecompileError;
 use blst::{blst_fp2, blst_p2_affine, blst_p2_affine_in_g2, blst_p2_affine_on_curve};
 use primitives::Bytes;
 
-/// Length of each of the elements in a g2 operation input.
-pub(super) const G2_INPUT_ITEM_LENGTH: usize = 256;
-
-/// Output length of a g2 operation.
-const G2_OUTPUT_LENGTH: usize = 256;
-
 /// Encodes a G2 point in affine format into byte slice with padded elements.
 pub(super) fn encode_g2_point(input: &blst_p2_affine) -> Bytes {
     let mut out = vec![0u8; G2_OUTPUT_LENGTH];

crates/precompile/src/bls12_381/g2_add.rs

@@ -1,4 +1,7 @@
-use super::g2::{encode_g2_point, extract_g2_input, G2_INPUT_ITEM_LENGTH};
+use super::g2::{encode_g2_point, extract_g2_input};
+use crate::bls12_381_const::{
+    G2_ADD_ADDRESS, G2_ADD_BASE_GAS_FEE, G2_ADD_INPUT_LENGTH, G2_INPUT_ITEM_LENGTH,
+};
 use crate::{u64_to_address, PrecompileWithAddress};
 use crate::{PrecompileError, PrecompileOutput, PrecompileResult};
 use blst::{
@@ -8,14 +11,7 @@ use primitives::Bytes;
 
 /// [EIP-2537](https://eips.ethereum.org/EIPS/eip-2537#specification) BLS12_G2ADD precompile.
 pub const PRECOMPILE: PrecompileWithAddress =
-    PrecompileWithAddress(u64_to_address(ADDRESS), g2_add);
-/// BLS12_G2ADD precompile address.
-pub const ADDRESS: u64 = 0x0d;
-/// Base gas fee for BLS12-381 g2_add operation.
-const BASE_GAS_FEE: u64 = 600;
-
-/// Input length of g2_add operation.
-const INPUT_LENGTH: usize = 512;
+    PrecompileWithAddress(u64_to_address(G2_ADD_ADDRESS), g2_add);
 
 /// G2 addition call expects `512` bytes as an input that is interpreted as byte
 /// concatenation of two G2 points (`256` bytes each).
@@ -24,13 +20,13 @@ const INPUT_LENGTH: usize = 512;
 /// bytes).
 /// See also <https://eips.ethereum.org/EIPS/eip-2537#abi-for-g2-addition>
 pub(super) fn g2_add(input: &Bytes, gas_limit: u64) -> PrecompileResult {
-    if BASE_GAS_FEE > gas_limit {
+    if G2_ADD_BASE_GAS_FEE > gas_limit {
         return Err(PrecompileError::OutOfGas.into());
     }
 
-    if input.len() != INPUT_LENGTH {
+    if input.len() != G2_ADD_INPUT_LENGTH {
         return Err(PrecompileError::Other(format!(
-            "G2ADD input should be {INPUT_LENGTH} bytes, was {}",
+            "G2ADD input should be {G2_ADD_INPUT_LENGTH} bytes, was {}",
             input.len()
         ))
         .into());
@@ -55,5 +51,5 @@ pub(super) fn g2_add(input: &Bytes, gas_limit: u64) -> PrecompileResult {
     unsafe { blst_p2_to_affine(&mut p_aff, &p) };
 
     let out = encode_g2_point(&p_aff);
-    Ok(PrecompileOutput::new(BASE_GAS_FEE, out))
+    Ok(PrecompileOutput::new(G2_ADD_BASE_GAS_FEE, out))
 }

crates/precompile/src/bls12_381/g2_msm.rs

@@ -1,7 +1,11 @@
 use super::{
-    g2::{encode_g2_point, extract_g2_input, G2_INPUT_ITEM_LENGTH},
+    g2::{encode_g2_point, extract_g2_input},
     msm::msm_required_gas,
-    utils::{extract_scalar_input, NBITS, SCALAR_LENGTH},
+    utils::extract_scalar_input,
+};
+use crate::bls12_381_const::{
+    DISCOUNT_TABLE_G2_MSM, G2_ADD_ADDRESS, G2_ADD_BASE_GAS_FEE, G2_ADD_INPUT_LENGTH,
+    G2_INPUT_ITEM_LENGTH, NBITS, SCALAR_LENGTH,
 };
 use crate::{u64_to_address, PrecompileWithAddress};
 use crate::{PrecompileError, PrecompileOutput, PrecompileResult};
@@ -10,27 +14,7 @@ use primitives::Bytes;
 
 /// [EIP-2537](https://eips.ethereum.org/EIPS/eip-2537#specification) BLS12_G2MSM precompile.
 pub const PRECOMPILE: PrecompileWithAddress =
-    PrecompileWithAddress(u64_to_address(ADDRESS), g2_msm);
-
-/// BLS12_G2MSM precompile address.
-pub const ADDRESS: u64 = 0x0e;
-
-/// Base gas fee for BLS12-381 g2_mul operation.
-pub const BASE_GAS_FEE: u64 = 22500;
-
-/// Input length of g2_mul operation.
-pub const INPUT_LENGTH: usize = 288;
-
-// Discounts table for G2 MSM as a vector of pairs `[k, discount]`:
-pub static DISCOUNT_TABLE: [u16; 128] = [
-    1000, 1000, 923, 884, 855, 832, 812, 796, 782, 770, 759, 749, 740, 732, 724, 717, 711, 704,
-    699, 693, 688, 683, 679, 674, 670, 666, 663, 659, 655, 652, 649, 646, 643, 640, 637, 634, 632,
-    629, 627, 624, 622, 620, 618, 615, 613, 611, 609, 607, 606, 604, 602, 600, 598, 597, 595, 593,
-    592, 590, 589, 587, 586, 584, 583, 582, 580, 579, 578, 576, 575, 574, 573, 571, 570, 569, 568,
-    567, 566, 565, 563, 562, 561, 560, 559, 558, 557, 556, 555, 554, 553, 552, 552, 551, 550, 549,
-    548, 547, 546, 545, 545, 544, 543, 542, 541, 541, 540, 539, 538, 537, 537, 536, 535, 535, 534,
-    533, 532, 532, 531, 530, 530, 529, 528, 528, 527, 526, 526, 525, 524, 524,
-];
+    PrecompileWithAddress(u64_to_address(G2_ADD_ADDRESS), g2_msm);
 
 /// Implements EIP-2537 G2MSM precompile.
 /// G2 multi-scalar-multiplication call expects `288*k` bytes as an input that is interpreted
@@ -42,24 +26,24 @@ pub static DISCOUNT_TABLE: [u16; 128] = [
 /// See also: <https://eips.ethereum.org/EIPS/eip-2537#abi-for-g2-multiexponentiation>
 pub(super) fn g2_msm(input: &Bytes, gas_limit: u64) -> PrecompileResult {
     let input_len = input.len();
-    if input_len == 0 || input_len % INPUT_LENGTH != 0 {
+    if input_len == 0 || input_len % G2_ADD_INPUT_LENGTH != 0 {
         return Err(PrecompileError::Other(format!(
             "G2MSM input length should be multiple of {}, was {}",
-            INPUT_LENGTH, input_len
+            G2_ADD_INPUT_LENGTH, input_len
         ))
         .into());
     }
 
-    let k = input_len / INPUT_LENGTH;
-    let required_gas = msm_required_gas(k, &DISCOUNT_TABLE, BASE_GAS_FEE);
+    let k = input_len / G2_ADD_INPUT_LENGTH;
+    let required_gas = msm_required_gas(k, &DISCOUNT_TABLE_G2_MSM, G2_ADD_BASE_GAS_FEE);
     if required_gas > gas_limit {
         return Err(PrecompileError::OutOfGas.into());
     }
 
     let mut g2_points: Vec<blst_p2> = Vec::with_capacity(k);
     let mut scalars: Vec<u8> = Vec::with_capacity(k * SCALAR_LENGTH);
     for i in 0..k {
-        let slice = &input[i * INPUT_LENGTH..i * INPUT_LENGTH + G2_INPUT_ITEM_LENGTH];
+        let slice = &input[i * G2_ADD_INPUT_LENGTH..i * G2_ADD_INPUT_LENGTH + G2_INPUT_ITEM_LENGTH];
         // BLST batch API for p2_affines blows up when you pass it a point at infinity, so we must
         // filter points at infinity (and their corresponding scalars) from the input.
         if slice.iter().all(|i| *i == 0) {
@@ -79,8 +63,8 @@ pub(super) fn g2_msm(input: &Bytes, gas_limit: u64) -> PrecompileResult {
 
         scalars.extend_from_slice(
             &extract_scalar_input(
-                &input[i * INPUT_LENGTH + G2_INPUT_ITEM_LENGTH
-                    ..i * INPUT_LENGTH + G2_INPUT_ITEM_LENGTH + SCALAR_LENGTH],
+                &input[i * G2_ADD_INPUT_LENGTH + G2_INPUT_ITEM_LENGTH
+                    ..i * G2_ADD_INPUT_LENGTH + G2_INPUT_ITEM_LENGTH + SCALAR_LENGTH],
             )?
             .b,
         );

crates/precompile/src/bls12_381/map_fp2_to_g2.rs

@@ -1,7 +1,6 @@
-use super::{
-    g2::check_canonical_fp2,
-    g2::encode_g2_point,
-    utils::{remove_padding, PADDED_FP2_LENGTH, PADDED_FP_LENGTH},
+use super::{g2::check_canonical_fp2, g2::encode_g2_point, utils::remove_padding};
+use crate::bls12_381_const::{
+    MAP_FP2_TO_G2_ADDRESS, MAP_FP2_TO_G2_BASE_GAS_FEE, PADDED_FP2_LENGTH, PADDED_FP_LENGTH,
 };
 use crate::{u64_to_address, PrecompileWithAddress};
 use crate::{PrecompileError, PrecompileOutput, PrecompileResult};
@@ -10,20 +9,14 @@ use primitives::Bytes;
 
 /// [EIP-2537](https://eips.ethereum.org/EIPS/eip-2537#specification) BLS12_MAP_FP2_TO_G2 precompile.
 pub const PRECOMPILE: PrecompileWithAddress =
-    PrecompileWithAddress(u64_to_address(ADDRESS), map_fp2_to_g2);
-
-/// BLS12_MAP_FP2_TO_G2 precompile address.
-pub const ADDRESS: u64 = 0x11;
-
-/// Base gas fee for BLS12-381 map_fp2_to_g2 operation.
-const BASE_GAS_FEE: u64 = 23800;
+    PrecompileWithAddress(u64_to_address(MAP_FP2_TO_G2_ADDRESS), map_fp2_to_g2);
 
 /// Field-to-curve call expects 128 bytes as an input that is interpreted as
 /// an element of Fp2. Output of this call is 256 bytes and is an encoded G2
 /// point.
 /// See also: <https://eips.ethereum.org/EIPS/eip-2537#abi-for-mapping-fp2-element-to-g2-point>
 pub(super) fn map_fp2_to_g2(input: &Bytes, gas_limit: u64) -> PrecompileResult {
-    if BASE_GAS_FEE > gas_limit {
+    if MAP_FP2_TO_G2_BASE_GAS_FEE > gas_limit {
         return Err(PrecompileError::OutOfGas.into());
     }
 
@@ -49,5 +42,5 @@ pub(super) fn map_fp2_to_g2(input: &Bytes, gas_limit: u64) -> PrecompileResult {
     unsafe { blst_p2_to_affine(&mut p_aff, &p) };
 
     let out = encode_g2_point(&p_aff);
-    Ok(PrecompileOutput::new(BASE_GAS_FEE, out))
+    Ok(PrecompileOutput::new(MAP_FP2_TO_G2_BASE_GAS_FEE, out))
 }

crates/precompile/src/bls12_381/map_fp_to_g1.rs

@@ -1,27 +1,22 @@
 use super::{
     g1::encode_g1_point,
-    utils::{fp_from_bendian, remove_padding, PADDED_FP_LENGTH},
+    utils::{fp_from_bendian, remove_padding},
 };
+use crate::bls12_381_const::{MAP_FP_TO_G1_ADDRESS, MAP_FP_TO_G1_BASE_GAS_FEE, PADDED_FP_LENGTH};
 use crate::{u64_to_address, PrecompileWithAddress};
 use crate::{PrecompileError, PrecompileOutput, PrecompileResult};
 use blst::{blst_map_to_g1, blst_p1, blst_p1_affine, blst_p1_to_affine};
 use primitives::Bytes;
 
 /// [EIP-2537](https://eips.ethereum.org/EIPS/eip-2537#specification) BLS12_MAP_FP_TO_G1 precompile.
 pub const PRECOMPILE: PrecompileWithAddress =
-    PrecompileWithAddress(u64_to_address(ADDRESS), map_fp_to_g1);
-
-/// BLS12_MAP_FP_TO_G1 precompile address.
-pub const ADDRESS: u64 = 0x10;
-
-/// Base gas fee for BLS12-381 map_fp_to_g1 operation.
-const MAP_FP_TO_G1_BASE: u64 = 5500;
+    PrecompileWithAddress(u64_to_address(MAP_FP_TO_G1_ADDRESS), map_fp_to_g1);
 
 /// Field-to-curve call expects 64 bytes as an input that is interpreted as an
 /// element of Fp. Output of this call is 128 bytes and is an encoded G1 point.
 /// See also: <https://eips.ethereum.org/EIPS/eip-2537#abi-for-mapping-fp-element-to-g1-point>
 pub(super) fn map_fp_to_g1(input: &Bytes, gas_limit: u64) -> PrecompileResult {
-    if MAP_FP_TO_G1_BASE > gas_limit {
+    if MAP_FP_TO_G1_BASE_GAS_FEE > gas_limit {
         return Err(PrecompileError::OutOfGas.into());
     }
 
@@ -46,7 +41,7 @@ pub(super) fn map_fp_to_g1(input: &Bytes, gas_limit: u64) -> PrecompileResult {
     unsafe { blst_p1_to_affine(&mut p_aff, &p) };
 
     let out = encode_g1_point(&p_aff);
-    Ok(PrecompileOutput::new(MAP_FP_TO_G1_BASE, out))
+    Ok(PrecompileOutput::new(MAP_FP_TO_G1_BASE_GAS_FEE, out))
 }
 
 #[cfg(test)]
@@ -57,7 +52,7 @@ mod test {
     #[test]
     fn sanity_test() {
         let input = Bytes::from(hex!("000000000000000000000000000000006900000000000000636f6e7472616374595a603f343061cd305a03f40239f5ffff31818185c136bc2595f2aa18e08f17"));
-        let fail = map_fp_to_g1(&input, MAP_FP_TO_G1_BASE);
+        let fail = map_fp_to_g1(&input, MAP_FP_TO_G1_BASE_GAS_FEE);
         assert_eq!(
             fail,
             Err(PrecompileError::Other("non-canonical fp value".to_string()).into())

crates/precompile/src/bls12_381/msm.rs

@@ -1,5 +1,4 @@
-/// Amount used to calculate the multi-scalar-multiplication discount
-const MSM_MULTIPLIER: u64 = 1000;
+use crate::bls12_381_const::MSM_MULTIPLIER;
 
 /// Implements the gas schedule for G1/G2 Multiscalar-multiplication assuming 30
 /// MGas/second, see also: <https://eips.ethereum.org/EIPS/eip-2537#g1g2-multiexponentiation>