ZUSTOCK

Zustock is a RepRap Delta printer.

The design is heavily inspired by the fantastic Rostock, Kossel, 3DR, and Boots Industries 3D printers.

It's a work in progress - I'm still waiting for parts to ship to me before actually building it.

The files here are provided for you to print, build, experiment and evolve the design however you choose, please share your experiences and modifications and let me know if you build one.

Thank you for downloading, please be aware and abide by the license that all these files are covered by;
Attribution - ShareAlike Creative Commons V3 (CC BY-SA 3.0)(http://creativecommons.org/licenses/by-sa/3.0/).
This License is not greatly restrictive, so please don't forget to attribute my work and acknowledge the work by others that this is built on.

Regards,
Omar Zuberi
https://plus.google.com/+OmarZuberi

Githubiverse Page

This page is an easy to navigate webpage generated by Githubiverse Template by Gary Hodgson (https://github.com/garyhodgson/githubiverse-template).
View this page and all the files here - http://zuberio.github.io/zustock/

Credits

Many people and projects have provided inspiration for this printer design. I would like to thank everyone working on RepRap projects the world over. Special thanks to -

Johann C. Rocholl (https://github.com/jcrocholl) for all the amazing work on the Rostock and Kossel Mini Delta printers and Delta printer firmware.

• Diagonal Arms Gimbal Point
  
• Diagonal Arms Ends (Forks) (modified)
  
• Retractable Autolevel Probe (modified)
  
• Effector Base
  
• Linear Motion Motor & Bottom Mount (modified)
  
• Linear Motion Top Mount (modified)
  

Richard Horne (http://richrap.github.io/3DR-Delta-Printer/) from whom I've pretty much copied and pasted this GitHub repository. As well as his remixes of Greg Frost's (http://www.thingiverse.com/GregFrost/designs) fantastic geared extruder.

• Extruder Main (modified)
  
• Extruder Compression Arm (modified)
  
• Extruder Pressure Bearing Axle
  

Boots Industries (http://bootsindustries.com/) for their fantastic Rostock BI V1.0 variant using fishing line & BI V2.0 using PLA carriage bushings on extruded aluminum rails.

• Linear Motion Cable Idler
  
• Linear Motion Cable Spool
  
• Linear Motion Carriage Main (modified)
  
• Extruder Compression Arm Hinge (modified)
  

Skarab for his great Lautr3k (http://www.thingiverse.com/thing:221726) 3D printer Sketchup model from which I grabbed a bunch of finishing touches.

• Effector 30mm fan holder (modified)
  
• Extruder 40mm fan holder (modified)
  
• Nuts and Bolts (modified)
  

Triffid Hunter (http://www.thingiverse.com/thing:10707) for some beautiful Herringbone Gears.

• Extruder Large Herringbone Gear
  
• Extruder Small Herringbone Gear
  

Zydac (http://www.thingiverse.com/thing:156860) for the idea behind his Rostock J-head mount.

• Effector Jhead Standoff 1o3 (heavily modified)
  
• Effector Jhead Standoff 2o3 (heavily modified)
  
• Effector Jhead Bowden Clamp (heavily modified)
  

I hope this work has been of some use to you, if you wish to say hello or donate towards further developments please stay tuned.

Please see www.reprap.org for information about the RepRap Project and visit the RepRap forum at http://forums.reprap.org/

3D Print Settings

Herringbone Gears

• Layer height = 0.3 mm
  
• Perimeters = 1
  
• Top/bottom solid layers = 1
  
• Infill density = 90%
  
• You'll need really good cooling to do the base of the small gear properly. When the large gear is finished, crank your fan up to max, perhaps convince your slicer to slow it down a little too.
  

Everything else

• Layer height = 0.3 mm
  
• Perimeters = 3
  
• Top/bottom solid layers = 3
  
• Infill density = 50%
  

More to come...