Fix make distclean for ./configure --with-config=user.
#1
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
"configure --with-config=user" creates a module/Makefile that
contains syntax errors like:
clean:
$(MAKE) -C SUBDIRS=`pwd` $@
if [ -f ]; then $(RM) ; fi
This matters because the top Makefile still calls module/Makefile
even if the kernel modules are not configured for building.
This happens because @LINUX_OBJ@ and @SPL_SYMBOLS@ are undefined if
config/kernel.m4 is not included by the configure script. This
change results in:
clean:
$(MAKE) -C '' SUBDIRS=`pwd` $@
if [ -f '' ]; then $(RM) ''; fi
which produces better error messages.
Running `make distclean` after `./configure --with-config=user` fails with this error message: Making distclean in module make[1]: Entering directory `/zfs/module' make -C SUBDIRS=`pwd` clean make: Entering an unknown directory make: *** SUBDIRS=/zfs/module: No such file or directory. Stop. make: Leaving an unknown directory make[1]: *** [clean] Error 2 make[1]: Leaving directory `/zfs/module' make: *** [distclean-recursive] Error 1 This happens because module/ has an external dependency on the Linux build system, which is unconfigured if CONFIG_KERNEL is not set. This change is worthwhile because debhelper assumes that all configurations produce a working distclean rule.
danielkza
pushed a commit
to danielkza/pkg-zfs
that referenced
this pull request
Feb 24, 2014
ZoL commit 1421c89 unintentionally changed the disk format in a forward- compatible, but not backward compatible way. This was accomplished by adding an entry to zbookmark_t, which is included in a couple of on-disk structures. That lead to the creation of pools with incorrect dsl_scan_phys_t objects that could only be imported by versions of ZoL containing that commit. Such pools cannot be imported by other versions of ZFS or past versions of ZoL. The additional field has been removed by the previous commit. However, affected pools must be imported and scrubbed using a version of ZoL with this commit applied. This will return the pools to a state in which they may be imported by other implementations. The 'zpool import' or 'zpool status' command can be used to determine if a pool is impacted. A message similar to one of the following means your pool must be scrubbed to restore compatibility. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata zfsonlinux#1 detected. action: The pool can be imported using its name or numeric identifier, however there is a compatibility issue which should be corrected by running 'zpool scrub' see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... $ zpool status pool: zol-0.6.2-173 state: ONLINE scan: pool compatibility issue detected. see: openzfs/zfs#2094 action: To correct the issue run 'zpool scrub'. config: ... If there was an async destroy in progress 'zpool import' will prevent the pool from being imported. Further advice on how to proceed will be provided by the error message as follows. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata zfsonlinux#2 detected. action: The pool can not be imported with this version of ZFS due to an active asynchronous destroy. Revert to an earlier version and allow the destroy to complete before updating. see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... Pools affected by the damaged dsl_scan_phys_t can be detected prior to an upgrade by running the following command as root: zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w Note that `poolname` must be replaced with the name of the pool you wish to check. A value of 25 indicates the dsl_scan_phys_t has been damaged. A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0 indicates that there has never been a scrub run on the pool. The regression caused by the change to zbookmark_t never made it into a tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL stable respositorys. Only those using the HEAD version directly from Github after the 0.6.2 but before the 0.6.3 tag are affected. This patch does have one limitation that should be mentioned. It will not detect errata zfsonlinux#2 on a pool unless errata zfsonlinux#1 is also present. It expected this will not be a significant problem because pools impacted by errata zfsonlinux#2 have a high probably of being impacted by errata zfsonlinux#1. End users can ensure they do no hit this unlikely case by waiting for all asynchronous destroy operations to complete before updating ZoL. The presence of any background destroys on any imported pools can be checked by running `zpool get freeing` as root. This will display a non-zero value for any pool with an active asynchronous destroy. Lastly, it is expected that no user data has been lost as a result of this erratum. Original-patch-by: Tim Chase <[email protected]> Reworked-by: Brian Behlendorf <[email protected]> Signed-off-by: Tim Chase <[email protected]> Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #2094
behlendorf
pushed a commit
that referenced
this pull request
Apr 8, 2014
openzfs/zfs#180 occurred because of a race between inode eviction and zfs_zget(). openzfs/zfs@36df284 tried to address it by making a call to the VFS to learn whether an inode is being evicted. If it was being evicted the operation was retried after dropping and reacquiring the relevant resources. Unfortunately, this introduced another deadlock. INFO: task kworker/u24:6:891 blocked for more than 120 seconds. Tainted: P O 3.13.6 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/u24:6 D ffff88107fcd2e80 0 891 2 0x00000000 Workqueue: writeback bdi_writeback_workfn (flush-zfs-5) ffff8810370ff950 0000000000000002 ffff88103853d940 0000000000012e80 ffff8810370fffd8 0000000000012e80 ffff88103853d940 ffff880f5c8be098 ffff88107ffb6950 ffff8810370ff980 ffff88103a9a5b78 0000000000000000 Call Trace: [<ffffffff813dd1d4>] schedule+0x24/0x70 [<ffffffff8115fc09>] __wait_on_freeing_inode+0x99/0xc0 [<ffffffff8115fdd8>] find_inode_fast+0x78/0xb0 [<ffffffff811608c5>] ilookup+0x65/0xd0 [<ffffffffa035c5ab>] zfs_zget+0xdb/0x260 [zfs] [<ffffffffa03589d6>] zfs_get_data+0x46/0x340 [zfs] [<ffffffffa035fee1>] zil_add_block+0xa31/0xc00 [zfs] [<ffffffffa0360642>] zil_commit+0x12/0x20 [zfs] [<ffffffffa036a6e4>] zpl_putpage+0x174/0x840 [zfs] [<ffffffff811071ec>] do_writepages+0x1c/0x40 [<ffffffff8116df2b>] __writeback_single_inode+0x3b/0x2b0 [<ffffffff8116ecf7>] writeback_sb_inodes+0x247/0x420 [<ffffffff8116f5f3>] wb_writeback+0xe3/0x320 [<ffffffff81170b8e>] bdi_writeback_workfn+0xfe/0x490 [<ffffffff8106072c>] process_one_work+0x16c/0x490 [<ffffffff810613f3>] worker_thread+0x113/0x390 [<ffffffff81066edf>] kthread+0xdf/0x100 This patch implements the original fix in a slightly different manner in order to avoid both deadlocks. Instead of relying on a call to ilookup() which can block in __wait_on_freeing_inode() the return value from igrab() is used. This gives us the information that ilookup() provided without the risk of a deadlock. Alternately, this race could be closed by registering an sops->drop_inode() callback. The callback would need to detect the active SA hold thereby informing the VFS that this inode should not be evicted. Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #180
siboulet
pushed a commit
to siboulet/pkg-zfs
that referenced
this pull request
Jul 19, 2014
ZoL commit 1421c89 unintentionally changed the disk format in a forward- compatible, but not backward compatible way. This was accomplished by adding an entry to zbookmark_t, which is included in a couple of on-disk structures. That lead to the creation of pools with incorrect dsl_scan_phys_t objects that could only be imported by versions of ZoL containing that commit. Such pools cannot be imported by other versions of ZFS or past versions of ZoL. The additional field has been removed by the previous commit. However, affected pools must be imported and scrubbed using a version of ZoL with this commit applied. This will return the pools to a state in which they may be imported by other implementations. The 'zpool import' or 'zpool status' command can be used to determine if a pool is impacted. A message similar to one of the following means your pool must be scrubbed to restore compatibility. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata zfsonlinux#1 detected. action: The pool can be imported using its name or numeric identifier, however there is a compatibility issue which should be corrected by running 'zpool scrub' see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... $ zpool status pool: zol-0.6.2-173 state: ONLINE scan: pool compatibility issue detected. see: openzfs/zfs#2094 action: To correct the issue run 'zpool scrub'. config: ... If there was an async destroy in progress 'zpool import' will prevent the pool from being imported. Further advice on how to proceed will be provided by the error message as follows. $ zpool import pool: zol-0.6.2-173 id: 1165955789558693437 state: ONLINE status: Errata zfsonlinux#2 detected. action: The pool can not be imported with this version of ZFS due to an active asynchronous destroy. Revert to an earlier version and allow the destroy to complete before updating. see: http://zfsonlinux.org/msg/ZFS-8000-ER config: ... Pools affected by the damaged dsl_scan_phys_t can be detected prior to an upgrade by running the following command as root: zdb -dddd poolname 1 | grep -P '^\t\tscan = ' | sed -e 's;scan = ;;' | wc -w Note that `poolname` must be replaced with the name of the pool you wish to check. A value of 25 indicates the dsl_scan_phys_t has been damaged. A value of 24 indicates that the dsl_scan_phys_t is normal. A value of 0 indicates that there has never been a scrub run on the pool. The regression caused by the change to zbookmark_t never made it into a tagged release, Gentoo backports, Ubuntu, Debian, Fedora, or EPEL stable respositorys. Only those using the HEAD version directly from Github after the 0.6.2 but before the 0.6.3 tag are affected. This patch does have one limitation that should be mentioned. It will not detect errata zfsonlinux#2 on a pool unless errata zfsonlinux#1 is also present. It expected this will not be a significant problem because pools impacted by errata zfsonlinux#2 have a high probably of being impacted by errata zfsonlinux#1. End users can ensure they do no hit this unlikely case by waiting for all asynchronous destroy operations to complete before updating ZoL. The presence of any background destroys on any imported pools can be checked by running `zpool get freeing` as root. This will display a non-zero value for any pool with an active asynchronous destroy. Lastly, it is expected that no user data has been lost as a result of this erratum. Original-patch-by: Tim Chase <[email protected]> Reworked-by: Brian Behlendorf <[email protected]> Signed-off-by: Tim Chase <[email protected]> Signed-off-by: Richard Yao <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Issue #2094
behlendorf
pushed a commit
that referenced
this pull request
Jul 10, 2015
The params to the functions are uint64_t, but the offsets to memcpy / bcopy are calculated using 32bit ints. This patch changes them to also be uint64_t so there isnt an overflow. PaX's Size Overflow caught this when formatting a zvol. Gentoo bug: #546490 PAX: offset: 1ffffb000 db->db_offset: 1ffffa000 db->db_size: 2000 size: 5000 PAX: size overflow detected in function dmu_read /var/tmp/portage/sys-fs/zfs-kmod-0.6.3-r1/work/zfs-zfs-0.6.3/module/zfs/../../module/zfs/dmu.c:781 cicus.366_146 max, count: 15 CPU: 1 PID: 2236 Comm: zvol/10 Tainted: P O 3.17.7-hardened-r1 #1 Call Trace: [<ffffffffa0382ee8>] ? dsl_dataset_get_holds+0x9d58/0x343ce [zfs] [<ffffffff81a59c88>] dump_stack+0x4e/0x7a [<ffffffffa0393c2a>] ? dsl_dataset_get_holds+0x1aa9a/0x343ce [zfs] [<ffffffff81206696>] report_size_overflow+0x36/0x40 [<ffffffffa02dba2b>] dmu_read+0x52b/0x920 [zfs] [<ffffffffa0373ad1>] zrl_is_locked+0x7d1/0x1ce0 [zfs] [<ffffffffa0364cd2>] zil_clean+0x9d2/0xc00 [zfs] [<ffffffffa0364f21>] zil_commit+0x21/0x30 [zfs] [<ffffffffa0373fe1>] zrl_is_locked+0xce1/0x1ce0 [zfs] [<ffffffff81a5e2c7>] ? __schedule+0x547/0xbc0 [<ffffffffa01582e6>] taskq_cancel_id+0x2a6/0x5b0 [spl] [<ffffffff81103eb0>] ? wake_up_state+0x20/0x20 [<ffffffffa0158150>] ? taskq_cancel_id+0x110/0x5b0 [spl] [<ffffffff810f7ff4>] kthread+0xc4/0xe0 [<ffffffff810f7f30>] ? kthread_create_on_node+0x170/0x170 [<ffffffff81a62fa4>] ret_from_fork+0x74/0xa0 [<ffffffff810f7f30>] ? kthread_create_on_node+0x170/0x170 Signed-off-by: Jason Zaman <[email protected]> Signed-off-by: Brian Behlendorf <[email protected]> Closes #3333
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Running
make distcleanafter./configure --with-config=userfails with this error message:This happens because module/ has an external dependency on the Linux build system, which is unconfigured if CONFIG_KERNEL is not set.
This change is worthwhile because debhelper assumes that all configurations produce a working distclean rule.