Zephyr v1.11.0
·
90976 commits
to main
since this release
We are pleased to announce the release of Zephyr kernel version 1.11.0.
Major enhancements with this release include:
- Thread-level memory protection on x86, ARC and Arm, userspace and memory
domains - Symmetric Multi Processing (SMP) support on the Xtensa architecture.
- Initial Armv8-M architecture support.
- Native development environment on Microsoft Windows.
- Native build target on POSIX platforms.
- POSIX PSE52 partial support.
- Thread support via integration with OpenThread.
- Firmware over-the-air (FOTA) updates over BLE using MCUmgr.
- Lightweight flash storage layer for constrained devices.
- Additional SoC, platform and driver support for many of the already supported
platforms.
The following sections provide detailed lists of changes by component.
Kernel
-
Initial Symmetric Multi Processing (SMP) support added:
- SMP-aware scheduler
- SMP timer and idling support
- Available on the Xtensa architecture
-
POSIX PSE52 support:
- Timer, clock, scheduler and pthread APIs
Architectures
-
User space and system call related changes:
- Added ARC user space implementation
- Added Arm user space implementation
- Fixed a few MPU related issues with stack guards
-
Armv8-M initial architecture support, including the following cores:
- Arm Cortex-M23
- Arm Cortex-M33
-
New POSIX architecture for native GNU/Linux and macOS build targets:
- Targets native executables that can be run on the host operating system
Boards
-
New native_posix board for the POSIX architecture:
- Includes a template for hardware models
- Adds support for console and logging
- Interrupts and timers are simulated in several different configurations
-
Added support for the following Arm boards:
- adafruit_trinket_m0
- arduino_zero
- lpcxpresso54114
- nrf52_sparkfun
- nucleo_f429zi
- stm32f072_eval
- stm32f072b_disco
-
Removed Panther board support, which included boards/x86/panther and
boards/arc/panther_ss -
Refactored dts.fixup so common SoC-related fixes are in arch/<*>/soc
and board dts.fixup is only used for board-specific items.
Drivers and Sensors
- New LED PWM driver for ESP32 SoC
- Fixed ESP32 I2C driver
- Added I2C master, QSPI flash, and GPIO drivers for nios-II
- Added PinMux, GPIO, serial drivers for LPC54114
- Added PinMux, GPIO, serial, SPI, and watchdog drivers for sam0
- Added APA102 and WS2821B led_strip drivers
- Added native entropy driver
- Moved some sensors to dts
- Added AMG88xx, CCS811, and VL53L0x sensor drivers
- Redefined SENSOR_CHAN_HUMIDITY in percent
Networking
- Generic OpenThread support added
- OpenThread support to nRF5 IEEE 802.15.4 driver added
- NXP MCUX ethernet driver IPv6 multicast join/leave enhancements
- Ethernet STM32 fixes
- IEEE 802.15.4 Sub-GHz TI CC1200 chip support added
- IEEE 802.15.4 test driver (upipe) hw filtering support added
- IEEE 802.15.4 radio API enhancements
- Net loopback driver fixes
- Net management API event enhancements
- IPv6 neighbor addition and removal can be monitored
- Static IPv4 and DHCPv4 configuration enhancements
- Bluetooth IPSP disconnect fix
- Network buffer enhancements
- ICMPv4 and ICMPv6 error checking fixes
- Network interface address handling enhancements
- Add routing support between network interfaces
- LWM2M fixes and enhancements
- Old legacy HTTP API removed
- Old legacy ZoAP API removed
- CoAP fixes
- TCP fixes
- HTTP fixes
- RPL fixes
- Net-app API fixes
- Net-shell fixes
- BSD socket API fixes
Bluetooth
- Multiple fixes to the controller
- Fixed potential connection transmission deadlock issue with the help
of a dedicated fragment pool - Multiple fixes to Mesh support
- Added test automation for Mesh (for tests/bluetooth/tester)
Build and Infrastructure
-
Native development environment on Microsoft Windows:
- Uses CMake and Kconfiglib to avoid requiring an emulation layer
- Package management support with Chocolatey for simple setup
- Build time now comparable to Linux and macOS using Ninja
Libraries / Subsystems
-
New management subsystem based on the cross-RTOS MCUmgr:
- Secure Firmware Updates over BLE and serial
- Support for file system access and statistics
- mcumgr cross-platform command-line tool
-
FCB (File Circular Buffer) lightweight storage layer:
- Wear-leveling support for NOR flashes
- Suitable for memory constrained devices
HALs
- Updated Arm CMSIS from version 4.5.0 to 5.2.0
- Updated stm32cube stm32l4xx from version 1.9.0 to 1.10.0
- Updated stm32cube stm32f4xx from version 1.16.0 to 1.18.0
- Added Atmel SAMD21 HAL
- Added mcux 2.2.1 for LPC54114
- Added HAL for VL53L0x sensor from STM
- Imported and moved to nRFx 0.8.0 on Nordic SoCs
- Added QSPI Controller HAL driver
Documentation
- Added MPU specific stack and userspace documentation
- Improved docs for Native (POSIX) support
- Docs for new samples and supported board
- General documentation clarifications and improvements
- Identify daily-built master-branch docs as "Latest" version
- Addressed Sphinx-generated intra-page link issues
- Updated doc generation tools (Doxygen, Sphinx, Breathe, Docutils)
Tests and Samples
- Added additional tests and test improvements for user space testing
Issue Related Items
These GitHub issues were addressed since the previous 1.10.0 tagged
release:
.. comment List derived from GitHub Issue query: ...
- :github:
1082- build all tests have issues for devices that don't exist on a given board - :github:
1281- spi_ll_stm32 driver does not support stm32f1soc - :github:
1291- Initial Posix PSE52 Support - :github:
1460- 1.10 Release Checklist - :github:
1462- rename nano_internal.h to kernel_internal.h - :github:
1526- Bluetooth:mesh:prov_start: Invalid authentication - :github:
1532- There are no RISC-V boards in the list of supported boards - :github:
1727- Support out-of-tree board definitions - :github:
1793- I2S device APIs and Drivers - :github:
1868- Build System cleanup and Kernel / Application build separation - :github:
1877- Provide single point of notification for new data on multiple sockets. - :github:
1890- Memory Management - :github:
1891- Native Port - :github:
1892- NFC Stack - :github:
1893- Unified Kernel - :github:
1921- Bluetooth LE 4.2 Hardware Support - :github:
1926- build system does not re-link if linker script changed - :github:
1930- bluetooth tester shall support logging on Arduino101 - :github:
2007- C++ compiler flags are not managed correctly - :github:
2072- create abstraction layer to directly use Altera HAL drivers for Nios II IP blocks - :github:
2107- handle configuration changes with more code coverage - :github:
2239- sporadic illegal instruction exception on Nios II in test_errno - :github:
2244- LE Controller: remove util folder - :github:
2280- Move defaults.tc and .known-issue under tests/ - :github:
2347- Thread Protocol v1.1 Dependencies on the IP Stack - :github:
2365- Port IOT Protocols to the new IP Stack - :github:
2477- no unit tests exist for CONFIG_DEBUG_INFO - :github:
2620- object files created outside of $O directory when obj-XYZ path is relative - :github:
2722- QEMU NIOS2 sporadic FAIL in tests/legacy/kernel/test_timer/nanokernel - :github:
2760- Implement Virtual USB ethernet Adapter support - :github:
2819- legacy/kernel/test_task_priv randomly fails on EMSK ARC - :github:
2889- [ARC] legacy/benchmark/latency_measure not measuring RIRQ/FIRQ - :github:
2891- implement _tsc_read equivalent for all architectures - :github:
2912- Develop Guideline for Handling Configuration Changes with More Code Coverage - :github:
2937- Thread-level Memory Protection Support - :github:
2939- Add Xtensa Port - :github:
2943- Support for the KW22D512 Kinetis MCU based USB Dongle - :github:
2971- I2C High-Speed Mode is not implemented - :github:
2994- The build system crashes when GCCARMEMB_TOOLCHAIN_PATH has a space in it - :github:
3069- XML encoding/decoding library - :github:
3081- Concise Binary Object Representation (CBOR) - :github:
3083- I2C problem Zephyr OS sensor example on NRF51 and F401re - :github:
3127- IP stack does not implement multicasting requirements of IPv6 RFCs and network driver model lacks features to implement it properly - :github:
3240- Unnecessary code footprint bloat due to "static inline" - :github:
3279- Reclaiming Memory - :github:
3283- Split net_buf parsing context from the actual data - :github:
3302- samples/subsys/logging/logger-hook needs to be a test case - :github:
3308- [TAHI] No "ICMPv6 error message" is received while sending echo request with parameter problem header - :github:
3316- [IPv6 TAHI] Section 1: RFC 2460 - IPv6 Specification - :github:
3317- [IPv6 TAHI]Section 4: RFC 1981 - Path MTU Discovery for IPv6 - :github:
3318- [IPv6 TAHI]Section 5: RFC 4443 - ICMPv6 - :github:
3322- [IPv6 TAHI] Section 3: RFC 4862 - IPv6 Stateless Address Autoconfiguration - :github:
3323- [IPv6 TAHI] Section 2: RFC 4861 - Neighbor Discovery for IPv6 - :github:
3329- Build warnings [-Wpointer-sign] with LLVM/icx (bluetooth_ipsp) - :github:
3345- Missing board documentation for riscv32/zedboard_pulpino - :github:
3346- Missing board documentation for riscv32/qemu_riscv32 - :github:
3351- Missing board documentation for arm/bbc_microbit board - :github:
3352- Missing board documentation for arm/nrf51_blenano - :github:
3439- IP stack: No MTU handling on send() - :github:
3440- IP stack: No TCP receive window handling - :github:
3483- Unify STM32 configuration files - :github:
3546- Enabling networking for targets w/o network hw causes hang on boot - :github:
3565- Symmetric multiprocessing (SMP) for Xtensa architecture - :github:
3597- Build warnings [-Wpointer-sign] with LLVM/icx (tests/net/ieee802154/crypto) - :github:
3614- cdc-acm error when printing one byte at a time - :github:
3617- Build warnings [-Wshift-overflow] with LLVM/icx (K_MEM_POOL_DEFINE) - :github:
3667- _IsInIsr doesn't work properly on Cortex M0 - :github:
3685- Test suite cleanup and Test Coverage - :github:
3704- Move all X86 boards to device tree - :github:
3707- intermittent work_queue test failure - :github:
3712- RPL client node version bogus incrementation - :github:
3718- Mpu stack guard is not set when reaching main - :github:
3747- tests/kernel/mem_slab/test_mslab_threadsafe/testcase.ini#test type:qemu-zephyr-arm - :github:
3809- Build warnings [-Wimplicit-function-declaration] with LLVM/icx (tests/drivers/pci_enum) - :github:
3833- make device_get_binding() more efficient - :github:
3834- CDC_ACM is limited to 4 bytes at a time for Arduino 101 - :github:
3838- Some tests end up with 0 platforms due to bad filtering - :github:
3850- SPI fails on Nucleo_f334r8 - :github:
3855- Support board files located in application directory - :github:
3856- LwM2M: Support write attributes (section 5.4.4 of spec) - :github:
3858- Enable OpenThread support for Zephyr - :github:
3859- Create OpenThread platform adaptation for Zephyr - :github:
3860- Create OpenThread network interface driver - :github:
3862- Verify that the OpenThread requirements are fulfilled by Zephyr 15.4 radio driver - :github:
3870- Create a shell to configure OpenThread stack - :github:
3872- build on windows failed " error: unrecognized command line option '-no-pie'" - :github:
3918- Build error [use of undeclared identifier]with LLVM/icx (samples/net/nats) - :github:
4000- xtensa-vectors.S builds wrong versions of ISRs based on HAL information - :github:
4010- [CID: 174928]: Control flow issues in /tests/kernel/mem_slab/mslab/src/slab.c - :github:
4025- Upgrade to TinyCrypt 0.2.7 has significant API changes - :github:
4045- convert to ztest for files in tests/kernel - :github:
4105- Sensors: move all the drivers using SPI bus to new SPI API - :github:
4106- Flash: move w25qxxdv driver to new SPI API - :github:
4216- samples:net:sockets:echo : communication blocks between client and server after few packets transmission - :github:
4351- arduino_101: USB device is not listed after flashing with a Zephyr sample - :github:
4401- tests/net/ipv6/test.yaml :--Cannot add multicast IPv6 address - :github:
4445- sanitycheck --platform-limit is broken - :github:
4513- parsetab.py is getting corrupted when multiple instance of sanitycheck is executed simultaneously - :github:
4549- tests/crypto/mbedtls/testcase.yaml#test :Build failed - :github:
4566- k_busy_wait( ) gives compilation error when CONFIG_SYS_CLOCK_TICKS_PER_SEC is set to 0 - :github:
4568- dts generation incorrect - :github:
4576- no testcase.yaml for tests/drivers/spi/spi_loopback - :github:
4578- tests/net/socket/udp/testcase.yaml#test : Build failed on esp32 - :github:
4596- tests/net/mgmt/testcase.yaml#test :failed due to un-handled exception - :github:
4597- tests/drivers/ipm/testcase.yaml#test :unable to print the Expected output - :github:
4603- sanitycheck either conceals information from user or spams it - :github:
4606- usb mass storage : config waits for Vendor ID and Product ID from user during building - :github:
4633- Implement flash page layout api in the Kinetis flash driver - :github:
4635- xtensa-esp32-elf-gcc.exe: error: unrecognized command line option '-no-pie' - :github:
4653- net: tcp->recv_max_ack isn't used - :github:
4666- x86 device trees need interrupt controller nodes - :github:
4687- Windows: Remove all dependencies on MSYS2 - :github:
4699- PWM LED Driver for ESP32 - :github:
4705- tests/net/socket/tcp/ undefined reference to __getreent - :github:
4709- tests/kernel/fatal/testcase.yaml#stack-sentinel : Kernel Panic - :github:
4724- sanitycheck build_only option can be confusing - :github:
4772- doc: add contributing info about shippable failures - :github:
4777- need a testcase for version number of the kernel and version.h - :github:
4779- net: tcp: FIN isn't sent when performing active close. - :github:
4826- Bluetooth IPSP example does not reach main() on qemu_cortex_m3 - :github:
4828- device tree: Introduce bus objects (i2c-device) - :github:
4851- cmake does not show verbose output of build tools - :github:
4885- cmake: IS_TEST guessing gets thrown off by symlinks - :github:
4924- dumb_http_server pollutes the source directory - :github:
4934- net: 15.4 network interfaces use incorrect MTU setting of 127 - :github:
4941- LwM2M: support discovery other than '/' - :github:
4983- ARMv8-M basic support - :github:
4989- Bluetooth: PTS fails to connect to Zephyr - :github:
5010- changes to included linker scripts are not picked up by the build system - :github:
5017- Genuino/Arduino 101 Sensor Sample BMI160: Gyro Device not found - :github:
5091- MPU fault at drivers/flash/soc_flash_nrf5.c:493 with NFFS enabled on nrf52840_pca10056 - :github:
5101- LwM2M: device hang after requesting a firmware update to a loopback device IP - :github:
5109- yaml: fix key/value syntax to 'mapping' instead of 'series' - :github:
5130- include guards missing in toolchain/gcc.h and toolchain/common.h - :github:
5136- "Distinguishing Features" section in docs is outdated and needs an update - :github:
5143- Cmake ignores setting CONFIG_ETH_MCUX_0=n in prj.conf - :github:
5148- Lightweight flash storage layer - :github:
5162- Reduce duplication in UUID definitions? - :github:
5184- kernel system call handlers missing due to -Wl,--no-whole-archive - :github:
5221- Build doesn't fail if total RAM usage is greater than the RAM available on the board - :github:
5226- Compiling with -O0 causes the kobject text area to exceed the limit (linker error) - :github:
5228- The build fails when building echo_server with nrf52840_pca10056 - :github:
5240- I2C is enabled by default on ESP32 - :github:
5247- Object tracing test case fails in NRF boards - :github:
5256- _nano_tick_delta, sys_tick_delta, sys_tick_delta_32: not used or tested - :github:
5270- Not all IEEE802154_MCR20A_RAW references were removed - :github:
5282- net: IPv6 DAD is incorrect, wouldn't work ("always succeed") on mcast medium like Ethernet - :github:
5283- reference to non-existing functions in arch/x86/core/intstub.S - :github:
5305- flash: use generated FLASH_WRITE_BLOCK_SIZE in flash_stm32_api - :github:
5317- IPSP deadlock during disconnect -> net_if_down - :github:
5326- IPSP ping fails - :github:
5328- build system should try and create conf if not found for non-zephyr SDK - :github:
5334- CMake: Ninja support is broken - :github:
5345- Cmake: ext: Header file include error: No such file or directory - :github:
5348- rom_report is broken for some environments - :github:
5351- Some libraries should automatically be linked with 'app' - :github:
5355- qemu_x86/qemu_x86_nommu hangs on big executable files - :github:
5370- [Coverity CID: 180699] Error handling issues in /tests/bluetooth/tester/src/gatt.c - :github:
5374- merge_config.sh can behave differently from merge_config.py - :github:
5379- sample: net/socket/http_get: no printf output - :github:
5382- P2P Device Firwmare Update (FOTA) over BLE and Serial - :github:
5391- drivers: stm32 clock control: F0 Series with PREDIV1 Support uses wrong PLLSOURCE define for HSI clock - :github:
5401- delta_ticks_from_prev become negative and waiting tasks never scheduled - :github:
5406- UART1 on STM32F0 Series not working: errors in makro to enable clock - :github:
5418- Provide a python based replacement for gperf - :github:
5419- Provide a python based kconfig processing script, replacement for conf/mconf.. - :github:
5428- can not build for esp32 - :github:
5444- bluetooth controller fails when building with -Wshadow - :github:
5448- STM32: Entropy test could not build - :github:
5449- STM32: provide default configuration for entropy sample - :github:
5453- gitlint should allow tabs in commit messages - :github:
5458- [ESP32] Make error - :github:
5466- sanitycheck: "CMake Error: : System Error: File name too long" - :github:
5467- NFFS file system does no build when newlib libc is used - :github:
5471- cmake errors at -B containing @ - :github:
5476- Native port (posix) to write own PID into a file - :github:
5477- Native port (posix) to support receiving signals - :github:
5483- Native port (POSIX) should accept command-line arguments - :github:
5484- net: ARP/ND: Possibility for deadlocks and DoS - :github:
5486- Bluetooth: Cannot connect to prevoiusly disconnected device when BT_PRIVACY is enabled - :github:
5488- target_ld_options will apply flags that should be skipped - :github:
5493- NFFS does not work with STM32L4 devices due to flash restrictions - :github:
5497- cmake: allow to link external libraries with --whole-archive - :github:
5499- config BT_CTLR_DEBUG_PINS - :github:
5504- net: Incorrect logic for TCP "ackerr" statistics - :github:
5530- [Coverity CID: 181848] Null pointer dereferences in /subsys/bluetooth/host/mesh/access.c - :github:
5531- [Coverity CID: 181847] Incorrect expression in /samples/drivers/crypto/src/main.c - :github:
5539- tests/kernel/fatal/stack-sentinel fails when asserts are enabled - :github:
5546- (Stupid) questions about coverage reports - :github:
5548- coverage should be collected from code built with -O0 - :github:
5557- Cloning Zephyr with git's core.autocrlf=true leads to obscure errors - :github:
5565- net: Kconfig: NET_BUF_LOG and NET_BUF_SIMPLE_LOG unrightly select STDOUT_CONSOLE - :github:
5566- kconfig: STDOUT_CONSOLE unrightly stuffed under subsys/debug - :github:
5576- None of the :github:'XYZ' links work in the 1.10 release notes - :github:
5589- Issue with using generic gcc cross compile with cmake - :github:
5601- docs for cc3220sf_launchxl are out of date/incorrect - :github:
5608- Bluetooth LE continous scan weird behaviour - :github:
5619- zephyr.git/tests/misc/test_build/testcase.yaml#test_newlib @ esp32:xtensa BUILD failed - :github:
5626- Building samples failed - :github:
5640- MacOS compile error with -std=gnu89 - :github:
5645- build failures with asserts enabled/newlib: arch/arm/core/cortex_m/mpu/nxp_mpu.c - :github:
5646- userbuffer_validate test fails with double fault if CONFIG_USERSPACE disabled - :github:
5650- i2c driver test on ESP32 fails with error - :github:
5651- [In Progress] arch: arm: linkder: vt must be linked at address 0x00000000 for Cortex-M0 - :github:
5660- doc: make: make htmldocs fails in genrest.py/kconfiglib.py - :github:
5673- kconfig regression: Existing configuration is overwritten on reconfiguration - :github:
5687- docs: Confusing treatment of "Sensor Drivers" in Zephyr subsystem docs - :github:
5692- sensors: struct sensor_value::val2 is confusingly defined - :github:
5693- sensors: SENSOR_CHAN_HUMIDITY confusingly defined in "milli percent", SENSOR_CHAN_DISTANCE inconsistently defined in millimeters - :github:
5696- net_app: Static vs DHCPv4 behavior appears to be not as described - :github:
5699- Zephyr installs a broken pyOCD - :github:
5717- CONTRIBUTING instructions are Linux-specific and don't work for Windows - :github:
5719- need a zephyr-env.sh equivalent for Windows developers - :github:
5720- Add CONFIG_NOOPTIMIZATIONS option - :github:
5722- dts board configuration is incompatible with "build all" kind of test - :github:
5724- [Windows] Instructions for setting up a bash-less environment uses bashisms - :github:
5726- CI should use the same generator as the sanitycheck default - :github:
5737- [Coverity CID: 182195] Error handling issues in /subsys/fs/fcb/fcb_walk.c - :github:
5740- [Coverity CID: 181923] Incorrect expression in /subsys/bluetooth/controller/ll_sw/ctrl.c - :github:
5741- [Coverity CID: 181922] Incorrect expression in /subsys/bluetooth/controller/ll_sw/ctrl.c - :github:
5743- Windows and Linux are writing .config files with options re-ordered - :github:
5749- Exception and Interrupt vector forwarding - :github:
5753- Bluetooth: controller: In nRF5 radio. c RATEBOOST event not cleared in ISRs - :github:
5755- Support flash in jlink runner - :github:
5756- MCUboot-compatible builds in Zephyr - :github:
5760- doc: device.h defines device_power_management_api group twice - :github:
5761- NRF5 BLE radio driver: PPI18 is cleared unconditionally - :github:
5762- Windows 10 WSL does not supports Native POSIX Boards - :github:
5766- boards: nucleo_f413zh: Likely outdated OpenOCD info in docs - :github:
5771- Linking issues with host cross compile with cmake - :github:
5772- sanitycheck crashes if ZEPHYR_BASE has symlinks in its path - :github:
5778- Add/fix flash controller nodes for NXP kinetis SoCs - :github:
5779- bluetooth test_controller_4_0 fails to build on nrf52840_pca10056 - :github:
5784- make rom_report fails for qemu_x86 (not finding zephyr.bin) - :github:
5794- wiki/Development-Model is out of date - :github:
5808- msys2 getting started instructions are missing Ninja install step - :github:
5817- socket.h: Using #define for POSIX redefinition of zsock_ functions has unintended consequences - :github:
5821- [MSYS2] Unable to build Zephyr - :github:
5823- Bluetooth: Collision during Start Encryption procedure - :github:
5836- spi: stm32: convert remaining boards that support SPI to using dts - :github:
5853- Using newlibc in a project breaks 'rom_report' and 'ram_report' targets. - :github:
5866- ram_report not working for qemu targets - :github:
5877- sensors: Cleanup Kconfig for address, driver & bus name - :github:
5881- enabling THREAD_MONITOR causes tests to fail - :github:
5886- [Coverity CID: 182602] Integer handling issues in /drivers/interrupt_controller/system_apic.c - :github:
5887- [Coverity CID: 182597] Control flow issues in /drivers/sensor/vl53l0x/vl53l0x.c - :github:
5888- [Coverity CID: 182594] Control flow issues in /drivers/sensor/lsm6ds0/lsm6ds0.c - :github:
5889- [Coverity CID: 182593] Control flow issues in /drivers/sensor/vl53l0x/vl53l0x.c - :github:
5890- [Coverity CID: 182588] Integer handling issues in /drivers/sensor/hts221/hts221.c - :github:
5903- Code coverage reports seem wrong - :github:
5919- Remove obsolete FLASH_DRIVER_NAME - :github:
5938- Incorrectly reported coverage changes - :github:
5952- API k_delayed_work_submit_to_queue() make a delayed_work unusable - :github:
5958- "Ninja flash" swallows user prompts - :github:
5968- datastructure for LIFO - :github:
5982- nRF5x subscribe will cause HardFault while disconnect and reconnect - :github:
5989- workstation setup instructions are broken for Fedora - :github:
5992- doc: Discrepancy in Zephyr memory domain API documentation - :github:
5994- samples/bluetooth/ipsp: build failed for MICRO-BIT & NRF51-PCA10028 HW - :github:
5996- Need a "ps aux" like command to list all running threads and their attributes - :github:
6010- Removal of old HTTP API is causing errors and faults - :github:
6013- updated workstations setup breaks FC27 - :github:
6023- Bluetooth: Invalid behaviour of Transport Layer after Incomplete timer expiration - :github:
6025- mbedTLS: Buffer overflow security issue, requires upgrade to 2.7.0 - :github:
6050- IPSP sample failed: Cannot bind IPv6 mcast (-2) - :github:
6062- build failure in tests/boards/altera_max10/i2c_master with sys log enabled - :github:
6064- k_is_in_isr() returns false inside "direct" interrupts on several arches - :github:
6081- echo server crash from corrupt ICMPv4 packet - :github:
6083- Bluetooth: Regression in MESH tests - :github:
6091- [Coverity CID: 182780] Error handling issues in /samples/net/sockets/http_get/src/http_get.c - :github:
6092- [Coverity CID: 182779] Memory - corruptions in /drivers/flash/soc_flash_nios2_qspi.c - :github:
6102- [Coverity CID: 182769] Error handling issues in /subsys/bluetooth/host/mesh/beacon.c - :github:
6121- doc: unit tests documentation refers to non existing sample code - :github:
6127- net: Semantics of CONFIG_NET_BUF_POOL_USAGE changed (incorrectly) - :github:
6131- mbedtls: Name of config-mini-tls1_2.h contradicts description - :github:
6135- build error with gcc 7.3 - :github:
6164- timer: cortex_m: Incorrect read of clock cycles counter after idle tickless period - :github:
6185- [MSYS2] Unable to build hello_world sample - :github:
6194- K64F ethernet regression since f7ec62e - :github:
6197- echo server crash from corrupt ICMPv6 packet - :github:
6204- bluetooth controller: crc init is not random - :github:
6217- echo server crash from corrupt ICMPv6 NS packet - :github:
6229- Bluetooth, nRF51: ticker_success_assert during flash erase - :github:
6231- samples/bluetooth/eddystone: failed to connect with central device - :github:
6232- samples/bluetooth/central_hr: Run time HARD fault occurs - :github:
6233- samples/bluetooth/central: Run time HARD fault occurs - :github:
6235- echo server crash from ICMPv6 NS source link layer address anomaly - :github:
6238- spi: stm32f0 IRQ priority is invalid - :github:
6240- "Previous execution" and "Next execution" display problem. - :github:
6257- test, please ignore - :github:
6261- [Coverity CID: 182887] Control flow issues in /drivers/gpio/gpio_esp32.c - :github:
6263- ARC: Implement userspace - :github:
6264- ARM: Implement Userspace - :github:
6279- Add doc to samples/bluetooth/mesh & samples/bluetooth/mesh_demo - :github:
6284- docs.zephyrproject.org should be served with HTTPS - :github:
6309- Non-blocking BSD sockets not working as expected - :github:
6312- The shell sample does not working on k64f board - :github:
6315- echo server crash from malformed ICMPv6 NA - :github:
6322- shell crashes when enter is pressed - :github:
6323- "SPI master port SPI_1 not found* when porting spi ethernet device enc28j60 on stm32_min_dev board - :github:
6324- doc: Project coding standards: page not found - :github:
6333- How do I implement GPIO on the f429zi board? - :github:
6339- samples/drivers/gpio Sample doesn't work on ESP32 after SMP support was added - :github:
6346- ESP-32 preemption regressions with asm2 - :github:
6382- echo server: crash from unsolicited RA reachable time anomaly - :github:
6393- echo server: crash from NS flood - :github:
6429- How to add custom driver subdirectory to application project? - :github:
6432- daily doc build pages don't indicate their version - :github:
6439- ESP32 doesn't compile in master - :github:
6444- tests/kernel/mem_protect/obj_validation/ fails to build - :github:
6455- k_sleep() fails on ESP32 sometimes - :github:
6469- tests/crypto/ecc_dsa results in FATAL EXCEPTION on esp32 - :github:
6470- tests/crypto/ecc_dh results in FATAL EXCEPTION on esp32 - :github:
6471- tests/crypto/aes results in Assertion failure on esp32 - :github:
6472- tests/crypto/sha256 results in Assertion failure on esp32 - :github:
6505- Userspace support: stack corruption for ARC em7d v2.3