-
Notifications
You must be signed in to change notification settings - Fork 29
Mechanical Design
Yash Mulgaonkar edited this page Dec 14, 2024
·
4 revisions
| Part | Quantity | Notes |
|---|---|---|
| HALO_base | 1 | Supports are recommended for printing |
| HALO_shell | 1 | Supports are recommended for printing |
| HALO_light_diffuser | 1 | Translucent PLA / PETG |
| HALO_cap | 1 | |
| HALO_CO2_riser | 1 | |
| HALO_side_mesh | 3 | A 0.2mm nozzle is preferred for higher resolution |
| HALO_top_mesh | 1 | A 0.2mm nozzle is preferred for higher resolution |
| Part | Quantity | Cost |
|---|---|---|
| M2 x 0.40mm Thread, 6mm Long Button Head Screw | 6 | $1.22 |
| M2 x 0.4mm Thread, 20mm Long Flat Head Screw | 6 | $4.95 |
| M2 x 0.40mm Thread, 8mm Long Button Head Screw | 4 | $1.02 |
| M2 x 0.4 mm Thread, 6 mm Long Flat Head Screw | 6 | $1.32 |
| M2 x 0.4mm, 4mm Installed Length Heat-Set Insert, Brass | 18 | $3.37 |
| M2.5 x 0.45mm, 5.6mm Installed Length Heat-Set Insert, Brass | 4 | $0.99 |
| M2.5 x 0.45mm Thread, 6mm Long Button Head Screw | 4 | $0.46 |
| Part | Notes | Suggested |
|---|---|---|
| VHB Double Sided Tape | Non-conductive tape, 10mm in width and 1.1mm in thickness | Amazon URL |
| Cyanoacrylate (CA) Glue | A gel is recommended as it provides better control and is less likely to drip | Amazon URL |