Fibaro HC3 QuickApp emulator for vscode

This QuickApp reads the PM2.5, PM10 values directly from a sensor somewhere in this world. That sensor doesn't have to be your sensor, any sensor can be used, just find one in your neighborhood. For locating a sensor(ID) in your neighborhood see: https://sensor.community/en/

This QuickApp contains data of accumulated temperature and precipitation, soil temperature and moisture from OpenWeathermap via Agro Monitoring.

This Quickapp retrieves power consumption, power production, gas and water usage from the (P1 Monitor) energy and gas meter

The Radiation Monitor collects radiation levels from all available stations around the world

This QuickApp gives access to real-time and 5-day forecast pollen count and risk category for grass pollen, mold spores, ragweed pollen and tree pollen of any location from Accuweather.com

This QuickApp reads the PM2.5, PM10, Temperature and Humidity values directly from a sensor. With this sensor you can measure air quality yourself. This QuickApp will send notifications when PM2.5 or PM10 readings reach a breakpoint.

This Quickapp retrieves energy consumption, energy production and gas usage from the Toon Energy meter

Restream Using Raspberry a H264 stream to to mjpeg

This Quickapp retrieves water consumption from the Toon Watermeter

Command line tools to interact with a Fibaro HC2 system

This QuickApp monitors your Solax managed Solar Panels

QuickApp: The Buienradar Weather contains the current Dutch measurements, the weather forecast and the 5-day forecast. The current observations are measured by KNMI weather stations spread across the country and are updated every 10 minutes. The weather report is updated several times a day by the Buienradar meteorologists. The properties temper…

This QuickApp predicts the rain in Europe with data from the Buienradar, two hours in advance

Iungo Monitor the capture the power consumption and production, gas and water usage

This QuickApp gets the actual water levels from rivers in France. The latest water level of your selected hydro station is updated in the value of this QuickApp

Pure LUA 5.2 implementation of HMAC_SHA256 algorithm, works in Fibaro Home Center 3.