Topic/cnl rt274 alignment #16

plbossart · 2018-07-02T19:19:09Z

same as for TDF8532, revert existing code and re-add all known fixes

…l_rt274" This reverts commit 51f6db7.

This reverts commit 1ac86e1.

This reverts commit 18ba099.

Add the CNL I2S machine driver using Realtek ALC274 codec in I2S mode. Change-Id: Ife808f52d69e73a8156130c446a3ab0602fff63d Signed-off-by: Guneshwor Singh <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/12406 Reviewed-by: Kale, Sanyog R <[email protected]> Reviewed-by: Kp, Jeeja <[email protected]> Tested-by: Avati, Santosh Kumar <[email protected]>

…machine FE dai links now come from topology, so remove them from machine driver. Additionally register ops to initialize dai link. Rate constraint is not required as rates will come from topology. So remove the startup ops as well which sets the rate constraint. Change-Id: I0fb07c74450bf55415323539e383ef39ed3ff4c4 Signed-off-by: Guneshwor Singh <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/13924 Reviewed-by: Koul, Vinod <[email protected]> Reviewed-by: Prusty, Subhransu S <[email protected]> Reviewed-by: Kp, Jeeja <[email protected]> Reviewed-by: Nc, Shreyas <[email protected]> Reviewed-by: Diwakar, Praveen <[email protected]> Tested-by: Sm, Bhadur A <[email protected]>

During BE-BE loop, codec clocks were not set as it was a part of dai link ops hw_params and no sound was heard due to this reason when use cases involve BE-BE loop. So, move codec clock setting as a part of supply widget and define routes appropriately. Also use macro to define BE rate fixup and use it for both fixup as well as clock computation. Change-Id: Id5a08d2bd6024a61b601dbbe70ad99a52149da5e Signed-off-by: Guneshwor Singh <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/14595 Reviewed-by: Prusty, Subhransu S <[email protected]> Reviewed-by: Kale, Sanyog R <[email protected]> Reviewed-by: R, Dharageswari <[email protected]> Reviewed-by: Diwakar, Praveen <[email protected]> Tested-by: Avati, Santosh Kumar <[email protected]>

Since NHLT does not have SSP1 endpoint, remove it from the dai link definitions Change-Id: I7b08f43d21eeff9decb5722e3af4f142f800b3f7 Signed-off-by: Guneshwor Singh <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/15999 Reviewed-by: Prusty, Subhransu S <[email protected]> Reviewed-by: Koul, Vinod <[email protected]> Reviewed-by: Babu, Ramesh <[email protected]> Reviewed-by: audio_build <[email protected]> Reviewed-by: Diwakar, Praveen <[email protected]> Tested-by: Sm, Bhadur A <[email protected]>

Pointer 'codec_dai' returned from call to cnl_get_codec_dai() can be NULL. Check for the valid pointer before dereferencing. Change-Id: I783b6220e32a9b8bf7655b92df7a4b034175a509 Signed-off-by: Pankaj Bharadiya <[email protected]> Reviewed-on: https://git-gar-1.devtools.intel.com/gerrit/18681 Reviewed-by: Prusty, Subhransu S <[email protected]> Reviewed-by: audio_build <[email protected]> Reviewed-by: Koul, Vinod <[email protected]> Tested-by: Sm, Bhadur A <[email protected]>

As the framework is changed in kernel 4.17 version, replace codec variable with component and use component specific function to set jack. Change-Id: Id6d1cda7968a5d524a3210f1b38221214c2bb67d Signed-off-by: Shahina Shaik <[email protected]>

Needs to be squashed with component model update, kept separate to avoid merge issues with SST code Signed-off-by: Pierre-Louis Bossart <[email protected]>

Use 24MHz instead of 19.2 (Mandatory rework) and use helper to find the dai Signed-off-by: Pierre-Louis Bossart <[email protected]>

(1)refine machine driver to make it work with sof (2)disable DMIC for it is not ready now Signed-off-by: Rander Wang <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]>

Add SOF platform name Signed-off-by: Rander Wang <[email protected]>

commit a5ba1d9 upstream. We have reports of the following crash: PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0" #0 [ffff88085c6db710] machine_kexec at ffffffff81046239 #1 [ffff88085c6db760] crash_kexec at ffffffff810fc248 #2 [ffff88085c6db830] oops_end at ffffffff81008ae7 #3 [ffff88085c6db860] no_context at ffffffff81050b8f thesofproject#4 [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75 thesofproject#5 [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83 thesofproject#6 [ffff88085c6db910] __do_page_fault at ffffffff8105132e thesofproject#7 [ffff88085c6db9b0] do_page_fault at ffffffff8105152c thesofproject#8 [ffff88085c6db9c0] page_fault at ffffffff81a3f122 [exception RIP: uart_put_char+149] RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006 RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081 RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120 RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320 R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000 R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 thesofproject#9 [ffff88085c6dbaa0] tty_put_char at ffffffff81497544 thesofproject#10 [ffff88085c6dbac0] do_output_char at ffffffff8149c91c thesofproject#11 [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b thesofproject#12 [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2 thesofproject#13 [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b thesofproject#14 [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a thesofproject#15 [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016 thesofproject#16 [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194 thesofproject#17 [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a thesofproject#18 [ffff88085c6dbd50] process_one_work at ffffffff81090be2 thesofproject#19 [ffff88085c6dbe20] worker_thread at ffffffff81091b4d thesofproject#20 [ffff88085c6dbeb0] kthread at ffffffff81096384 thesofproject#21 [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f after slogging through some dissasembly: ffffffff814b6720 <uart_put_char>: ffffffff814b6720: 55 push %rbp ffffffff814b6721: 48 89 e5 mov %rsp,%rbp ffffffff814b6724: 48 83 ec 20 sub $0x20,%rsp ffffffff814b6728: 48 89 1c 24 mov %rbx,(%rsp) ffffffff814b672c: 4c 89 64 24 08 mov %r12,0x8(%rsp) ffffffff814b6731: 4c 89 6c 24 10 mov %r13,0x10(%rsp) ffffffff814b6736: 4c 89 74 24 18 mov %r14,0x18(%rsp) ffffffff814b673b: e8 b0 8e 58 00 callq ffffffff81a3f5f0 <mcount> ffffffff814b6740: 4c 8b a7 88 02 00 00 mov 0x288(%rdi),%r12 ffffffff814b6747: 45 31 ed xor %r13d,%r13d ffffffff814b674a: 41 89 f6 mov %esi,%r14d ffffffff814b674d: 49 83 bc 24 70 01 00 cmpq $0x0,0x170(%r12) ffffffff814b6754: 00 00 ffffffff814b6756: 49 8b 9c 24 80 01 00 mov 0x180(%r12),%rbx ffffffff814b675d: 00 ffffffff814b675e: 74 2f je ffffffff814b678f <uart_put_char+0x6f> ffffffff814b6760: 48 89 df mov %rbx,%rdi ffffffff814b6763: e8 a8 67 58 00 callq ffffffff81a3cf10 <_raw_spin_lock_irqsave> ffffffff814b6768: 41 8b 8c 24 78 01 00 mov 0x178(%r12),%ecx ffffffff814b676f: 00 ffffffff814b6770: 89 ca mov %ecx,%edx ffffffff814b6772: f7 d2 not %edx ffffffff814b6774: 41 03 94 24 7c 01 00 add 0x17c(%r12),%edx ffffffff814b677b: 00 ffffffff814b677c: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b6782: 75 23 jne ffffffff814b67a7 <uart_put_char+0x87> ffffffff814b6784: 48 89 c6 mov %rax,%rsi ffffffff814b6787: 48 89 df mov %rbx,%rdi ffffffff814b678a: e8 e1 64 58 00 callq ffffffff81a3cc70 <_raw_spin_unlock_irqrestore> ffffffff814b678f: 44 89 e8 mov %r13d,%eax ffffffff814b6792: 48 8b 1c 24 mov (%rsp),%rbx ffffffff814b6796: 4c 8b 64 24 08 mov 0x8(%rsp),%r12 ffffffff814b679b: 4c 8b 6c 24 10 mov 0x10(%rsp),%r13 ffffffff814b67a0: 4c 8b 74 24 18 mov 0x18(%rsp),%r14 ffffffff814b67a5: c9 leaveq ffffffff814b67a6: c3 retq ffffffff814b67a7: 49 8b 94 24 70 01 00 mov 0x170(%r12),%rdx ffffffff814b67ae: 00 ffffffff814b67af: 48 63 c9 movslq %ecx,%rcx ffffffff814b67b2: 41 b5 01 mov $0x1,%r13b ffffffff814b67b5: 44 88 34 0a mov %r14b,(%rdx,%rcx,1) ffffffff814b67b9: 41 8b 94 24 78 01 00 mov 0x178(%r12),%edx ffffffff814b67c0: 00 ffffffff814b67c1: 83 c2 01 add $0x1,%edx ffffffff814b67c4: 81 e2 ff 0f 00 00 and $0xfff,%edx ffffffff814b67ca: 41 89 94 24 78 01 00 mov %edx,0x178(%r12) ffffffff814b67d1: 00 ffffffff814b67d2: eb b0 jmp ffffffff814b6784 <uart_put_char+0x64> ffffffff814b67d4: 66 66 66 2e 0f 1f 84 data32 data32 nopw %cs:0x0(%rax,%rax,1) ffffffff814b67db: 00 00 00 00 00 for our build, this is crashing at: circ->buf[circ->head] = c; Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf) protected by the "per-port mutex", which based on uart_port_check() is state->port.mutex. Indeed, the lock acquired in uart_put_char() is uport->lock, i.e. not the same lock. Anyway, since the lock is not acquired, if uart_shutdown() is called, the last chunk of that function may release state->xmit.buf before its assigned to null, and cause the race above. To fix it, let's lock uport->lock when allocating/deallocating state->xmit.buf in addition to the per-port mutex. v2: switch to locking uport->lock on allocation/deallocation instead of locking the per-port mutex in uart_put_char. Note that since uport->lock is a spin lock, we have to switch the allocation to GFP_ATOMIC. v3: move the allocation outside the lock, so we can switch back to GFP_KERNEL Signed-off-by: Tycho Andersen <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 6cc4a08 upstream. info->nr_rings isn't adjusted in case of ENOMEM error from negotiate_mq(). This leads to kernel panic in error path. Typical call stack involving panic - thesofproject#8 page_fault at ffffffff8175936f [exception RIP: blkif_free_ring+33] RIP: ffffffffa0149491 RSP: ffff8804f7673c08 RFLAGS: 00010292 ... thesofproject#9 blkif_free at ffffffffa0149aaa [xen_blkfront] thesofproject#10 talk_to_blkback at ffffffffa014c8cd [xen_blkfront] thesofproject#11 blkback_changed at ffffffffa014ea8b [xen_blkfront] thesofproject#12 xenbus_otherend_changed at ffffffff81424670 thesofproject#13 backend_changed at ffffffff81426dc3 thesofproject#14 xenwatch_thread at ffffffff81422f29 thesofproject#15 kthread at ffffffff810abe6a thesofproject#16 ret_from_fork at ffffffff81754078 Cc: [email protected] Fixes: 7ed8ce1 ("xen-blkfront: move negotiate_mq to cover all cases of new VBDs") Signed-off-by: Manjunath Patil <[email protected]> Acked-by: Roger Pau Monné <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Reported by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 0000000000000014 PGD 800000040410c067 P4D 800000040410c067 PUD 40410d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 2567 Comm: poc Tainted: G OE 4.19.0-rc5 #16 RIP: 0010:kvm_pv_send_ipi+0x94/0x350 [kvm] Call Trace: kvm_emulate_hypercall+0x3cc/0x700 [kvm] handle_vmcall+0xe/0x10 [kvm_intel] vmx_handle_exit+0xc1/0x11b0 [kvm_intel] vcpu_enter_guest+0x9fb/0x1910 [kvm] kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm] kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm] do_vfs_ioctl+0xa5/0x690 ksys_ioctl+0x6d/0x80 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x83/0x6e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The reason is that the apic map has not yet been initialized, the testcase triggers pv_send_ipi interface by vmcall which results in kvm->arch.apic_map is dereferenced. This patch fixes it by checking whether or not apic map is NULL and bailing out immediately if that is the case. Fixes: 4180bf1 (KVM: X86: Implement "send IPI" hypercall) Reported-by: Wei Wu <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Radim Krčmář <[email protected]> Cc: Wei Wu <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>

Reported by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 PGD 80000003ec4da067 P4D 80000003ec4da067 PUD 3f7bfa067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 5059 Comm: debug Tainted: G OE 4.19.0-rc5 #16 RIP: 0010:__lock_acquire+0x1a6/0x1990 Call Trace: lock_acquire+0xdb/0x210 _raw_spin_lock+0x38/0x70 kvm_ioapic_scan_entry+0x3e/0x110 [kvm] vcpu_enter_guest+0x167e/0x1910 [kvm] kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm] kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm] do_vfs_ioctl+0xa5/0x690 ksys_ioctl+0x6d/0x80 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x83/0x6e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT6 msr and triggers scan ioapic logic to load synic vectors into EOI exit bitmap. However, irqchip is not initialized by this simple testcase, ioapic/apic objects should not be accessed. This can be triggered by the following program: #define _GNU_SOURCE #include <endian.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> uint64_t r[3] = {0xffffffffffffffff, 0xffffffffffffffff, 0xffffffffffffffff}; int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); long res = 0; memcpy((void*)0x20000040, "/dev/kvm", 9); res = syscall(__NR_openat, 0xffffffffffffff9c, 0x20000040, 0, 0); if (res != -1) r[0] = res; res = syscall(__NR_ioctl, r[0], 0xae01, 0); if (res != -1) r[1] = res; res = syscall(__NR_ioctl, r[1], 0xae41, 0); if (res != -1) r[2] = res; memcpy( (void*)0x20000080, "\x01\x00\x00\x00\x00\x5b\x61\xbb\x96\x00\x00\x40\x00\x00\x00\x00\x01\x00" "\x08\x00\x00\x00\x00\x00\x0b\x77\xd1\x78\x4d\xd8\x3a\xed\xb1\x5c\x2e\x43" "\xaa\x43\x39\xd6\xff\xf5\xf0\xa8\x98\xf2\x3e\x37\x29\x89\xde\x88\xc6\x33" "\xfc\x2a\xdb\xb7\xe1\x4c\xac\x28\x61\x7b\x9c\xa9\xbc\x0d\xa0\x63\xfe\xfe" "\xe8\x75\xde\xdd\x19\x38\xdc\x34\xf5\xec\x05\xfd\xeb\x5d\xed\x2e\xaf\x22" "\xfa\xab\xb7\xe4\x42\x67\xd0\xaf\x06\x1c\x6a\x35\x67\x10\x55\xcb", 106); syscall(__NR_ioctl, r[2], 0x4008ae89, 0x20000080); syscall(__NR_ioctl, r[2], 0xae80, 0); return 0; } This patch fixes it by bailing out scan ioapic if ioapic is not initialized in kernel. Reported-by: Wei Wu <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Radim Krčmář <[email protected]> Cc: Wei Wu <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>

commit e97f852 upstream. Reported by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 PGD 80000003ec4da067 P4D 80000003ec4da067 PUD 3f7bfa067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 5059 Comm: debug Tainted: G OE 4.19.0-rc5 thesofproject#16 RIP: 0010:__lock_acquire+0x1a6/0x1990 Call Trace: lock_acquire+0xdb/0x210 _raw_spin_lock+0x38/0x70 kvm_ioapic_scan_entry+0x3e/0x110 [kvm] vcpu_enter_guest+0x167e/0x1910 [kvm] kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm] kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm] do_vfs_ioctl+0xa5/0x690 ksys_ioctl+0x6d/0x80 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x83/0x6e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT6 msr and triggers scan ioapic logic to load synic vectors into EOI exit bitmap. However, irqchip is not initialized by this simple testcase, ioapic/apic objects should not be accessed. This can be triggered by the following program: #define _GNU_SOURCE #include <endian.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> uint64_t r[3] = {0xffffffffffffffff, 0xffffffffffffffff, 0xffffffffffffffff}; int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); long res = 0; memcpy((void*)0x20000040, "/dev/kvm", 9); res = syscall(__NR_openat, 0xffffffffffffff9c, 0x20000040, 0, 0); if (res != -1) r[0] = res; res = syscall(__NR_ioctl, r[0], 0xae01, 0); if (res != -1) r[1] = res; res = syscall(__NR_ioctl, r[1], 0xae41, 0); if (res != -1) r[2] = res; memcpy( (void*)0x20000080, "\x01\x00\x00\x00\x00\x5b\x61\xbb\x96\x00\x00\x40\x00\x00\x00\x00\x01\x00" "\x08\x00\x00\x00\x00\x00\x0b\x77\xd1\x78\x4d\xd8\x3a\xed\xb1\x5c\x2e\x43" "\xaa\x43\x39\xd6\xff\xf5\xf0\xa8\x98\xf2\x3e\x37\x29\x89\xde\x88\xc6\x33" "\xfc\x2a\xdb\xb7\xe1\x4c\xac\x28\x61\x7b\x9c\xa9\xbc\x0d\xa0\x63\xfe\xfe" "\xe8\x75\xde\xdd\x19\x38\xdc\x34\xf5\xec\x05\xfd\xeb\x5d\xed\x2e\xaf\x22" "\xfa\xab\xb7\xe4\x42\x67\xd0\xaf\x06\x1c\x6a\x35\x67\x10\x55\xcb", 106); syscall(__NR_ioctl, r[2], 0x4008ae89, 0x20000080); syscall(__NR_ioctl, r[2], 0xae80, 0); return 0; } This patch fixes it by bailing out scan ioapic if ioapic is not initialized in kernel. Reported-by: Wei Wu <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Radim Krčmář <[email protected]> Cc: Wei Wu <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

Calling kvm_is_visible_gfn() implies that we're parsing the memslots, and doing this without the srcu lock is frown upon: [12704.164532] ============================= [12704.164544] WARNING: suspicious RCU usage [12704.164560] 5.1.0-rc1-00008-g600025238f51-dirty #16 Tainted: G W [12704.164573] ----------------------------- [12704.164589] ./include/linux/kvm_host.h:605 suspicious rcu_dereference_check() usage! [12704.164602] other info that might help us debug this: [12704.164616] rcu_scheduler_active = 2, debug_locks = 1 [12704.164631] 6 locks held by qemu-system-aar/13968: [12704.164644] #0: 000000007ebdae4f (&kvm->lock){+.+.}, at: vgic_its_set_attr+0x244/0x3a0 [12704.164691] #1: 000000007d751022 (&its->its_lock){+.+.}, at: vgic_its_set_attr+0x250/0x3a0 [12704.164726] #2: 00000000219d2706 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164761] #3: 00000000a760aecd (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164794] #4: 000000000ef8e31d (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164827] #5: 000000007a872093 (&vcpu->mutex){+.+.}, at: lock_all_vcpus+0x64/0xd0 [12704.164861] stack backtrace: [12704.164878] CPU: 2 PID: 13968 Comm: qemu-system-aar Tainted: G W 5.1.0-rc1-00008-g600025238f51-dirty #16 [12704.164887] Hardware name: rockchip evb_rk3399/evb_rk3399, BIOS 2019.04-rc3-00124-g2feec69fb1 03/15/2019 [12704.164896] Call trace: [12704.164910] dump_backtrace+0x0/0x138 [12704.164920] show_stack+0x24/0x30 [12704.164934] dump_stack+0xbc/0x104 [12704.164946] lockdep_rcu_suspicious+0xcc/0x110 [12704.164958] gfn_to_memslot+0x174/0x190 [12704.164969] kvm_is_visible_gfn+0x28/0x70 [12704.164980] vgic_its_check_id.isra.0+0xec/0x1e8 [12704.164991] vgic_its_save_tables_v0+0x1ac/0x330 [12704.165001] vgic_its_set_attr+0x298/0x3a0 [12704.165012] kvm_device_ioctl_attr+0x9c/0xd8 [12704.165022] kvm_device_ioctl+0x8c/0xf8 [12704.165035] do_vfs_ioctl+0xc8/0x960 [12704.165045] ksys_ioctl+0x8c/0xa0 [12704.165055] __arm64_sys_ioctl+0x28/0x38 [12704.165067] el0_svc_common+0xd8/0x138 [12704.165078] el0_svc_handler+0x38/0x78 [12704.165089] el0_svc+0x8/0xc Make sure the lock is taken when doing this. Fixes: bf30824 ("KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock") Reviewed-by: Eric Auger <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>

…r-free issue The evlist should be destroyed before the perf session. Detected with gcc's ASan: ================================================================= ==27350==ERROR: AddressSanitizer: heap-use-after-free on address 0x62b000002e38 at pc 0x5611da276999 bp 0x7ffce8f1d1a0 sp 0x7ffce8f1d190 WRITE of size 8 at 0x62b000002e38 thread T0 #0 0x5611da276998 in __list_del /home/work/linux/tools/include/linux/list.h:89 #1 0x5611da276d4a in __list_del_entry /home/work/linux/tools/include/linux/list.h:102 #2 0x5611da276e77 in list_del_init /home/work/linux/tools/include/linux/list.h:145 #3 0x5611da2781cd in thread__put util/thread.c:130 #4 0x5611da2cc0a8 in __thread__zput util/thread.h:68 #5 0x5611da2d2dcb in hist_entry__delete util/hist.c:1148 #6 0x5611da2cdf91 in hists__delete_entry util/hist.c:337 #7 0x5611da2ce19e in hists__delete_entries util/hist.c:365 #8 0x5611da2db2ab in hists__delete_all_entries util/hist.c:2639 #9 0x5611da2db325 in hists_evsel__exit util/hist.c:2651 #10 0x5611da1c5352 in perf_evsel__exit util/evsel.c:1304 #11 0x5611da1c5390 in perf_evsel__delete util/evsel.c:1309 #12 0x5611da1b35f0 in perf_evlist__purge util/evlist.c:124 #13 0x5611da1b38e2 in perf_evlist__delete util/evlist.c:148 #14 0x5611da069781 in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1645 #15 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #16 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #17 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #18 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #19 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) #20 0x5611d9ff35c9 in _start (/home/work/linux/tools/perf/perf+0x3e95c9) 0x62b000002e38 is located 11320 bytes inside of 27448-byte region [0x62b000000200,0x62b000006d38) freed by thread T0 here: #0 0x7fdccb04ab70 in free (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedb70) #1 0x5611da260df4 in perf_session__delete util/session.c:201 #2 0x5611da063de5 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1300 #3 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #4 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #5 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #6 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #7 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #8 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) previously allocated by thread T0 here: #0 0x7fdccb04b138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5611da26010c in zalloc util/util.h:23 #2 0x5611da260824 in perf_session__new util/session.c:118 #3 0x5611da0633a6 in __cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1192 #4 0x5611da06973c in cmd_top /home/changbin/work/linux/tools/perf/builtin-top.c:1642 #5 0x5611da17d038 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #6 0x5611da17d577 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #7 0x5611da17d97b in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #8 0x5611da17e0e9 in main /home/changbin/work/linux/tools/perf/perf.c:520 #9 0x7fdcc970f09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) SUMMARY: AddressSanitizer: heap-use-after-free /home/work/linux/tools/include/linux/list.h:89 in __list_del Shadow bytes around the buggy address: 0x0c567fff8570: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8580: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8590: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85a0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85b0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd =>0x0c567fff85c0: fd fd fd fd fd fd fd[fd]fd fd fd fd fd fd fd fd 0x0c567fff85d0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85e0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff85f0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd 0x0c567fff8610: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==27350==ABORTING Signed-off-by: Changbin Du <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Using gcc's ASan, Changbin reports: ================================================================= ==7494==ERROR: LeakSanitizer: detected memory leaks Direct leak of 48 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e5330a5e in zalloc util/util.h:23 #2 0x5625e5330a9b in perf_counts__new util/counts.c:10 #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #7 0x5625e51528e6 in run_test tests/builtin-test.c:358 #8 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #10 0x5625e515572f in cmd_test tests/builtin-test.c:722 #11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 72 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e532560d in zalloc util/util.h:23 #2 0x5625e532566b in xyarray__new util/xyarray.c:10 #3 0x5625e5330aba in perf_counts__new util/counts.c:15 #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #8 0x5625e51528e6 in run_test tests/builtin-test.c:358 #9 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #11 0x5625e515572f in cmd_test tests/builtin-test.c:722 #12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) His patch took care of evsel->prev_raw_counts, but the above backtraces are about evsel->counts, so fix that instead. Reported-by: Changbin Du <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

ifmsh->csa is an RCU-protected pointer. The writer context in ieee80211_mesh_finish_csa() is already mutually exclusive with wdev->sdata.mtx, but the RCU checker did not know this. Use rcu_dereference_protected() to avoid a warning. fixes the following warning: [ 12.519089] ============================= [ 12.520042] WARNING: suspicious RCU usage [ 12.520652] 5.1.0-rc7-wt+ thesofproject#16 Tainted: G W [ 12.521409] ----------------------------- [ 12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage! [ 12.522928] other info that might help us debug this: [ 12.523984] rcu_scheduler_active = 2, debug_locks = 1 [ 12.524855] 5 locks held by kworker/u8:2/152: [ 12.525438] #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.526607] #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620 [ 12.528001] #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90 [ 12.529116] #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90 [ 12.530233] thesofproject#4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90 Signed-off-by: Thomas Pedersen <[email protected]> Signed-off-by: Johannes Berg <[email protected]>

[ Upstream commit 4d8e3e9 ] During early system resume on Exynos5422 with performance counters enabled the following kernel oops happens: Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1433 Comm: bash Tainted: G W 5.0.0-rc5-next-20190208-00023-gd5fb5a8a13e6-dirty #5480 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) ... Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4451006a DAC: 00000051 Process bash (pid: 1433, stack limit = 0xb7e0e22f) ... (reset_ctrl_regs) from [<c0112ad0>] (dbg_cpu_pm_notify+0x1c/0x24) (dbg_cpu_pm_notify) from [<c014c840>] (notifier_call_chain+0x44/0x84) (notifier_call_chain) from [<c014cbc0>] (__atomic_notifier_call_chain+0x7c/0x128) (__atomic_notifier_call_chain) from [<c01ffaac>] (cpu_pm_notify+0x30/0x54) (cpu_pm_notify) from [<c055116c>] (syscore_resume+0x98/0x3f4) (syscore_resume) from [<c0189350>] (suspend_devices_and_enter+0x97c/0xe74) (suspend_devices_and_enter) from [<c0189fb8>] (pm_suspend+0x770/0xc04) (pm_suspend) from [<c0187740>] (state_store+0x6c/0xcc) (state_store) from [<c09fa698>] (kobj_attr_store+0x14/0x20) (kobj_attr_store) from [<c030159c>] (sysfs_kf_write+0x4c/0x50) (sysfs_kf_write) from [<c0300620>] (kernfs_fop_write+0xfc/0x1e0) (kernfs_fop_write) from [<c0282be8>] (__vfs_write+0x2c/0x160) (__vfs_write) from [<c0282ea4>] (vfs_write+0xa4/0x16c) (vfs_write) from [<c0283080>] (ksys_write+0x40/0x8c) (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Undefined instruction is triggered during CP14 reset, because bits: thesofproject#16 (Secure privileged invasive debug disabled) and thesofproject#17 (Secure privileged noninvasive debug disable) are set in DSCR. Those bits depend on SPNIDEN and SPIDEN lines, which are provided by Secure JTAG hardware block. That block in turn is powered from cluster 0 (big/Eagle), but the Exynos5422 boots on cluster 1 (LITTLE/KFC). To fix this issue it is enough to turn on the power on the cluster 0 for a while. This lets the Secure JTAG block to propagate the needed signals to LITTLE/KFC cores and change their DSCR. Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Testing padata with the tcrypt module on a 5.2 kernel... # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3 # modprobe tcrypt mode=211 sec=1 ...produces this splat: INFO: task modprobe:10075 blocked for more than 120 seconds. Not tainted 5.2.0-base+ thesofproject#16 modprobe D 0 10075 10064 0x80004080 Call Trace: ? __schedule+0x4dd/0x610 ? ring_buffer_unlock_commit+0x23/0x100 schedule+0x6c/0x90 schedule_timeout+0x3b/0x320 ? trace_buffer_unlock_commit_regs+0x4f/0x1f0 wait_for_common+0x160/0x1a0 ? wake_up_q+0x80/0x80 { crypto_wait_req } # entries in braces added by hand { do_one_aead_op } { test_aead_jiffies } test_aead_speed.constprop.17+0x681/0xf30 [tcrypt] do_test+0x4053/0x6a2b [tcrypt] ? 0xffffffffa00f4000 tcrypt_mod_init+0x50/0x1000 [tcrypt] ... The second modprobe command never finishes because in padata_reorder, CPU0's load of reorder_objects is executed before the unlocking store in spin_unlock_bh(pd->lock), causing CPU0 to miss CPU1's increment: CPU0 CPU1 padata_reorder padata_do_serial LOAD reorder_objects // 0 INC reorder_objects // 1 padata_reorder TRYLOCK pd->lock // failed UNLOCK pd->lock CPU0 deletes the timer before returning from padata_reorder and since no other job is submitted to padata, modprobe waits indefinitely. Add a pair of full barriers to guarantee proper ordering: CPU0 CPU1 padata_reorder padata_do_serial UNLOCK pd->lock smp_mb() LOAD reorder_objects INC reorder_objects smp_mb__after_atomic() padata_reorder TRYLOCK pd->lock smp_mb__after_atomic is needed so the read part of the trylock operation comes after the INC, as Andrea points out. Thanks also to Andrea for help with writing a litmus test. Fixes: 16295be ("padata: Generic parallelization/serialization interface") Signed-off-by: Daniel Jordan <[email protected]> Cc: <[email protected]> Cc: Andrea Parri <[email protected]> Cc: Boqun Feng <[email protected]> Cc: Herbert Xu <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steffen Klassert <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Herbert Xu <[email protected]>

After making a change to improve objtool's sibling call detection, it started showing the following warning: arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame The problem is the ____kvm_handle_fault_on_reboot() macro. It does a fake call by pushing a fake RIP and doing a jump. That tricks the unwinder into printing the function which triggered the exception, rather than the .fixup code. Instead of the hack to make it look like the original function made the call, just change the macro so that the original function actually does make the call. This allows removal of the hack, and also makes objtool happy. I triggered a vmx instruction exception and verified that the stack trace is still sane: kernel BUG at arch/x86/kvm/x86.c:358! invalid opcode: 0000 [#1] SMP PTI CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ thesofproject#16 Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017 RIP: 0010:kvm_spurious_fault+0x5/0x10 Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffbf91c683bd00 EFLAGS: 00010246 RAX: 000061f040000000 RBX: ffff9e159c77bba0 RCX: ffff9e15a5c87000 RDX: 0000000665c87000 RSI: ffff9e15a5c87000 RDI: ffff9e159c77bba0 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9e15a5c87000 R10: 0000000000000000 R11: fffff8f2d99721c0 R12: ffff9e159c77bba0 R13: ffffbf91c671d960 R14: ffff9e159c778000 R15: 0000000000000000 FS: 00007fa341cbe700(0000) GS:ffff9e15b7400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd38356804 CR3: 00000006759de003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: loaded_vmcs_init+0x4f/0xe0 alloc_loaded_vmcs+0x38/0xd0 vmx_create_vcpu+0xf7/0x600 kvm_vm_ioctl+0x5e9/0x980 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? free_one_page+0x13f/0x4e0 do_vfs_ioctl+0xa4/0x630 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa349b1ee5b Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Paolo Bonzini <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/64a9b64d127e87b6920a97afde8e96ea76f6524e.1563413318.git.jpoimboe@redhat.com

A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] Signed-off-by: Jens Axboe <[email protected]>

We meet several NULL pointer issues if configfs_composite_unbind and composite_setup (or composite_disconnect) are running together. These issues occur when do the function switch stress test, the configfs_compsoite_unbind is called from user mode by echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt or disconnect interrupt occurs by hardware. The composite_setup will get the cdev from get_gadget_data, but configfs_composite_unbind will set gadget data as NULL, so the NULL pointer issue occurs. This concurrent is hard to reproduce by native kernel, but can be reproduced by android kernel. In this commit, we introduce one spinlock belongs to structure gadget_info since we can't use the same spinlock in usb_composite_dev due to exclusive running together between composite_setup and configfs_composite_unbind. And one bit flag 'unbind' to indicate the code is at unbind routine, this bit is needed due to we release the lock at during configfs_composite_unbind sometimes, and composite_setup may be run at that time. Several oops: oops 1: android_work: sent uevent USB_STATE=CONNECTED configfs-gadget gadget: super-speed config #1: b android_work: sent uevent USB_STATE=CONFIGURED init: Received control message 'start' for 'adbd' from pid: 3515 (system_server) Unable to handle kernel NULL pointer dereference at virtual address 0000002a init: Received control message 'stop' for 'adbd' from pid: 3375 (/vendor/bin/hw/[email protected]) Mem abort info: Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgd = ffff8008f1b7f000 [000000000000002a] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 4 PID: 2457 Comm: irq/125-5b11000 Not tainted 4.14.98-07846-g0b40a9b-dirty #16 Hardware name: Freescale i.MX8QM MEK (DT) task: ffff8008f2a98000 task.stack: ffff00000b7b8000 PC is at composite_setup+0x44/0x1508 LR is at android_setup+0xb8/0x13c pc : [<ffff0000089ffb3c>] lr : [<ffff000008a032fc>] pstate: 800001c5 sp : ffff00000b7bbb80 x29: ffff00000b7bbb80 x28: ffff8008f2a3c010 x27: 0000000000000001 x26: 0000000000000000 [1232/1897] audit: audit_lost=25791 audit_rate_limit=5 audit_backlog_limit=64 x25: 00000000ffffffa1 x24: ffff8008f2a3c010 audit: rate limit exceeded x23: 0000000000000409 x22: ffff000009c8e000 x21: ffff8008f7a8b428 x20: ffff00000afae000 x19: ffff0000089ff000 x18: 0000000000000000 x17: 0000000000000000 x16: ffff0000082b7c9c x15: 0000000000000000 x14: f1866f5b952aca46 x13: e35502e30d44349c x12: 0000000000000008 x11: 0000000000000008 x10: 0000000000000a30 x9 : ffff00000b7bbd00 x8 : ffff8008f2a98a90 x7 : ffff8008f27a9c90 x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000006 x1 : ffff0000089ff8d0 x0 : 732a010310b9ed00 X7: 0xffff8008f27a9c10: 9c10 00000002 00000000 00000001 00000000 13110000 ffff0000 00000002 00208040 9c30 00000000 00000000 00000000 00000000 00000000 00000005 00000029 00000000 9c50 00051778 00000001 f27a8e00 ffff8008 00000005 00000000 00000078 00000078 9c70 00000078 00000000 09031d48 ffff0000 00100000 00000000 00400000 00000000 9c90 00000001 00000000 00000000 00000000 00000000 00000000 ffefb1a0 ffff8008 9cb0 f27a9ca8 ffff8008 00000000 00000000 b9d88037 00000173 1618a3eb 00000001 9cd0 870a792a 0000002e 16188fe6 00000001 0000242b 00000000 00000000 00000000 using random self ethernet address 9cf0 019a4646 00000000 000547f3 00000000 ecfd6c33 00000002 00000000 using random host ethernet address 00000000 X8: 0xffff8008f2a98a10: 8a10 00000000 00000000 f7788d00 ffff8008 00000001 00000000 00000000 00000000 8a30 eb218000 ffff8008 f2a98000 ffff8008 f2a98000 ffff8008 09885000 ffff0000 8a50 f34df480 ffff8008 00000000 00000000 f2a98648 ffff8008 09c8e000 ffff0000 8a70 fff2c800 ffff8008 09031d48 ffff0000 0b7bbd00 ffff0000 0b7bbd00 ffff0000 8a90 080861bc ffff0000 00000000 00000000 00000000 00000000 00000000 00000000 8ab0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8ad0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8af0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 X21: 0xffff8008f7a8b3a8: b3a8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b3c8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b3e8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b408 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000 b428 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b448 0053004d 00540046 00300031 00010030 eb07b520 ffff8008 20011201 00000003 b468 e418d109 0104404e 00010302 00000000 eb07b558 ffff8008 eb07b558 ffff8008 b488 f7a8b488 ffff8008 f7a8b488 ffff8008 f7a8b300 ffff8008 00000000 00000000 X24: 0xffff8008f2a3bf90: bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000 c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008 c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008 X28: 0xffff8008f2a3bf90: bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000 c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008 c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008 Process irq/125-5b11000 (pid: 2457, stack limit = 0xffff00000b7b8000) Call trace: Exception stack(0xffff00000b7bba40 to 0xffff00000b7bbb80) ba40: 732a010310b9ed00 ffff0000089ff8d0 0000000000000006 0000000000000000 ba60: 0000000000000001 0000000000000000 0000000000000001 ffff8008f27a9c90 ba80: ffff8008f2a98a90 ffff00000b7bbd00 0000000000000a30 0000000000000008 baa0: 0000000000000008 e35502e30d44349c f1866f5b952aca46 0000000000000000 bac0: ffff0000082b7c9c 0000000000000000 0000000000000000 ffff0000089ff000 bae0: ffff00000afae000 ffff8008f7a8b428 ffff000009c8e000 0000000000000409 bb00: ffff8008f2a3c010 00000000ffffffa1 0000000000000000 0000000000000001 bb20: ffff8008f2a3c010 ffff00000b7bbb80 ffff000008a032fc ffff00000b7bbb80 bb40: ffff0000089ffb3c 00000000800001c5 ffff00000b7bbb80 732a010310b9ed00 bb60: ffffffffffffffff ffff0000080f777c ffff00000b7bbb80 ffff0000089ffb3c [<ffff0000089ffb3c>] composite_setup+0x44/0x1508 [<ffff000008a032fc>] android_setup+0xb8/0x13c [<ffff0000089bd9a8>] cdns3_ep0_delegate_req+0x44/0x70 [<ffff0000089bdff4>] cdns3_check_ep0_interrupt_proceed+0x33c/0x654 [<ffff0000089bca44>] cdns3_device_thread_irq_handler+0x4b0/0x4bc [<ffff0000089b77b4>] cdns3_thread_irq+0x48/0x68 [<ffff000008145bf0>] irq_thread_fn+0x28/0x88 [<ffff000008145e38>] irq_thread+0x13c/0x228 [<ffff0000080fed70>] kthread+0x104/0x130 [<ffff000008085064>] ret_from_fork+0x10/0x18 oops2: composite_disconnect: Calling disconnect on a Gadget that is not connected android_work: did not send uevent (0 0 (null)) init: Received control message 'stop' for 'adbd' from pid: 3359 (/vendor/bin/hw/[email protected]) init: Sending signal 9 to service 'adbd' (pid 22343) process group... ------------[ cut here ]------------ audit: audit_lost=180038 audit_rate_limit=5 audit_backlog_limit=64 audit: rate limit exceeded WARNING: CPU: 0 PID: 3468 at kernel_imx/drivers/usb/gadget/composite.c:2009 composite_disconnect+0x80/0x88 Modules linked in: CPU: 0 PID: 3468 Comm: HWC-UEvent-Thre Not tainted 4.14.98-07846-g0b40a9b-dirty #16 Hardware name: Freescale i.MX8QM MEK (DT) task: ffff8008f2349c00 task.stack: ffff00000b0a8000 PC is at composite_disconnect+0x80/0x88 LR is at composite_disconnect+0x80/0x88 pc : [<ffff0000089ff9b0>] lr : [<ffff0000089ff9b0>] pstate: 600001c5 sp : ffff000008003dd0 x29: ffff000008003dd0 x28: ffff8008f2349c00 x27: ffff000009885018 x26: ffff000008004000 Timeout for IPC response! x25: ffff000009885018 x24: ffff000009c8e280 x23: ffff8008f2d98010 x22: 00000000000001c0 x21: ffff8008f2d98394 x20: ffff8008f2d98010 x19: 0000000000000000 x18: 0000e3956f4f075a fxos8700 4-001e: i2c block read acc failed x17: 0000e395735727e8 x16: ffff00000829f4d4 x15: ffffffffffffffff x14: 7463656e6e6f6320 x13: 746f6e2009090920 x12: 7369207461687420 x11: 7465676461472061 x10: 206e6f207463656e x9 : 6e6f637369642067 x8 : ffff000009c8e280 x7 : ffff0000086ca6cc x6 : ffff000009f15e78 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffffffffffff x2 : c3f28b86000c3900 x1 : c3f28b86000c3900 x0 : 000000000000004e X20: 0xffff8008f2d97f90: 7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 libprocessgroup: Failed to kill process cgroup uid 0 pid 22343 in 215ms, 1 processes remain 7fd0 Timeout for IPC response! 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 using random self ethernet address 7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc using random host ethernet address ffff0000 8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008 8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008 X21: 0xffff8008f2d98314: 8314 ffff8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8334 00000000 00000000 00000000 00000000 00000000 08a04cf4 ffff0000 00000000 8354 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8374 00000000 00000000 00000000 00001001 00000000 00000000 00000000 00000000 8394 e4bbe4bb 0f230000 ffff0000 0afae000 ffff0000 ae001000 00000000 f206d400 Timeout for IPC response! 83b4 ffff8008 00000000 00000000 f7957b18 ffff8008 f7957718 ffff8008 f7957018 83d4 ffff8008 f7957118 ffff8008 f7957618 ffff8008 f7957818 ffff8008 f7957918 83f4 ffff8008 f7957d18 ffff8008 00000000 00000000 00000000 00000000 00000000 X23: 0xffff8008f2d97f90: 7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc ffff0000 8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008 8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008 X28: 0xffff8008f2349b80: 9b80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ba0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9bc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9be0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9c00 00000022 00000000 ffffffff ffffffff 00010001 00000000 00000000 00000000 9c20 0b0a8000 ffff0000 00000002 00404040 00000000 00000000 00000000 00000000 9c40 00000001 00000000 00000001 00000000 001ebd44 00000001 f390b800 ffff8008 9c60 00000000 00000001 00000070 00000070 00000070 00000000 09031d48 ffff0000 Call trace: Exception stack(0xffff000008003c90 to 0xffff000008003dd0) 3c80: 000000000000004e c3f28b86000c3900 3ca0: c3f28b86000c3900 ffffffffffffffff 0000000000000000 0000000000000000 3cc0: ffff000009f15e78 ffff0000086ca6cc ffff000009c8e280 6e6f637369642067 3ce0: 206e6f207463656e 7465676461472061 7369207461687420 746f6e2009090920 3d00: 7463656e6e6f6320 ffffffffffffffff ffff00000829f4d4 0000e395735727e8 3d20: 0000e3956f4f075a 0000000000000000 ffff8008f2d98010 ffff8008f2d98394 3d40: 00000000000001c0 ffff8008f2d98010 ffff000009c8e280 ffff000009885018 3d60: ffff000008004000 ffff000009885018 ffff8008f2349c00 ffff000008003dd0 3d80: ffff0000089ff9b0 ffff000008003dd0 ffff0000089ff9b0 00000000600001c5 3da0: ffff8008f33f2cd8 0000000000000000 0000ffffffffffff 0000000000000000 init: Received control message 'start' for 'adbd' from pid: 3359 (/vendor/bin/hw/[email protected]) 3dc0: ffff000008003dd0 ffff0000089ff9b0 [<ffff0000089ff9b0>] composite_disconnect+0x80/0x88 [<ffff000008a044d4>] android_disconnect+0x3c/0x68 [<ffff0000089ba9f8>] cdns3_device_irq_handler+0xfc/0x2c8 [<ffff0000089b84c0>] cdns3_irq+0x44/0x94 [<ffff00000814494c>] __handle_irq_event_percpu+0x60/0x24c [<ffff000008144c0c>] handle_irq_event+0x58/0xc0 [<ffff00000814873c>] handle_fasteoi_irq+0x98/0x180 [<ffff000008143a10>] generic_handle_irq+0x24/0x38 [<ffff000008144170>] __handle_domain_irq+0x60/0xac [<ffff0000080819c4>] gic_handle_irq+0xd4/0x17c Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>

[ Upstream commit 1a1c851 ] We meet several NULL pointer issues if configfs_composite_unbind and composite_setup (or composite_disconnect) are running together. These issues occur when do the function switch stress test, the configfs_compsoite_unbind is called from user mode by echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt or disconnect interrupt occurs by hardware. The composite_setup will get the cdev from get_gadget_data, but configfs_composite_unbind will set gadget data as NULL, so the NULL pointer issue occurs. This concurrent is hard to reproduce by native kernel, but can be reproduced by android kernel. In this commit, we introduce one spinlock belongs to structure gadget_info since we can't use the same spinlock in usb_composite_dev due to exclusive running together between composite_setup and configfs_composite_unbind. And one bit flag 'unbind' to indicate the code is at unbind routine, this bit is needed due to we release the lock at during configfs_composite_unbind sometimes, and composite_setup may be run at that time. Several oops: oops 1: android_work: sent uevent USB_STATE=CONNECTED configfs-gadget gadget: super-speed config #1: b android_work: sent uevent USB_STATE=CONFIGURED init: Received control message 'start' for 'adbd' from pid: 3515 (system_server) Unable to handle kernel NULL pointer dereference at virtual address 0000002a init: Received control message 'stop' for 'adbd' from pid: 3375 (/vendor/bin/hw/[email protected]) Mem abort info: Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgd = ffff8008f1b7f000 [000000000000002a] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 4 PID: 2457 Comm: irq/125-5b11000 Not tainted 4.14.98-07846-g0b40a9b-dirty thesofproject#16 Hardware name: Freescale i.MX8QM MEK (DT) task: ffff8008f2a98000 task.stack: ffff00000b7b8000 PC is at composite_setup+0x44/0x1508 LR is at android_setup+0xb8/0x13c pc : [<ffff0000089ffb3c>] lr : [<ffff000008a032fc>] pstate: 800001c5 sp : ffff00000b7bbb80 x29: ffff00000b7bbb80 x28: ffff8008f2a3c010 x27: 0000000000000001 x26: 0000000000000000 [1232/1897] audit: audit_lost=25791 audit_rate_limit=5 audit_backlog_limit=64 x25: 00000000ffffffa1 x24: ffff8008f2a3c010 audit: rate limit exceeded x23: 0000000000000409 x22: ffff000009c8e000 x21: ffff8008f7a8b428 x20: ffff00000afae000 x19: ffff0000089ff000 x18: 0000000000000000 x17: 0000000000000000 x16: ffff0000082b7c9c x15: 0000000000000000 x14: f1866f5b952aca46 x13: e35502e30d44349c x12: 0000000000000008 x11: 0000000000000008 x10: 0000000000000a30 x9 : ffff00000b7bbd00 x8 : ffff8008f2a98a90 x7 : ffff8008f27a9c90 x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000006 x1 : ffff0000089ff8d0 x0 : 732a010310b9ed00 X7: 0xffff8008f27a9c10: 9c10 00000002 00000000 00000001 00000000 13110000 ffff0000 00000002 00208040 9c30 00000000 00000000 00000000 00000000 00000000 00000005 00000029 00000000 9c50 00051778 00000001 f27a8e00 ffff8008 00000005 00000000 00000078 00000078 9c70 00000078 00000000 09031d48 ffff0000 00100000 00000000 00400000 00000000 9c90 00000001 00000000 00000000 00000000 00000000 00000000 ffefb1a0 ffff8008 9cb0 f27a9ca8 ffff8008 00000000 00000000 b9d88037 00000173 1618a3eb 00000001 9cd0 870a792a 0000002e 16188fe6 00000001 0000242b 00000000 00000000 00000000 using random self ethernet address 9cf0 019a4646 00000000 000547f3 00000000 ecfd6c33 00000002 00000000 using random host ethernet address 00000000 X8: 0xffff8008f2a98a10: 8a10 00000000 00000000 f7788d00 ffff8008 00000001 00000000 00000000 00000000 8a30 eb218000 ffff8008 f2a98000 ffff8008 f2a98000 ffff8008 09885000 ffff0000 8a50 f34df480 ffff8008 00000000 00000000 f2a98648 ffff8008 09c8e000 ffff0000 8a70 fff2c800 ffff8008 09031d48 ffff0000 0b7bbd00 ffff0000 0b7bbd00 ffff0000 8a90 080861bc ffff0000 00000000 00000000 00000000 00000000 00000000 00000000 8ab0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8ad0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8af0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 X21: 0xffff8008f7a8b3a8: b3a8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b3c8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b3e8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b408 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000 b428 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 b448 0053004d 00540046 00300031 00010030 eb07b520 ffff8008 20011201 00000003 b468 e418d109 0104404e 00010302 00000000 eb07b558 ffff8008 eb07b558 ffff8008 b488 f7a8b488 ffff8008 f7a8b488 ffff8008 f7a8b300 ffff8008 00000000 00000000 X24: 0xffff8008f2a3bf90: bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000 c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008 c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008 X28: 0xffff8008f2a3bf90: bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000 c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008 c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008 Process irq/125-5b11000 (pid: 2457, stack limit = 0xffff00000b7b8000) Call trace: Exception stack(0xffff00000b7bba40 to 0xffff00000b7bbb80) ba40: 732a010310b9ed00 ffff0000089ff8d0 0000000000000006 0000000000000000 ba60: 0000000000000001 0000000000000000 0000000000000001 ffff8008f27a9c90 ba80: ffff8008f2a98a90 ffff00000b7bbd00 0000000000000a30 0000000000000008 baa0: 0000000000000008 e35502e30d44349c f1866f5b952aca46 0000000000000000 bac0: ffff0000082b7c9c 0000000000000000 0000000000000000 ffff0000089ff000 bae0: ffff00000afae000 ffff8008f7a8b428 ffff000009c8e000 0000000000000409 bb00: ffff8008f2a3c010 00000000ffffffa1 0000000000000000 0000000000000001 bb20: ffff8008f2a3c010 ffff00000b7bbb80 ffff000008a032fc ffff00000b7bbb80 bb40: ffff0000089ffb3c 00000000800001c5 ffff00000b7bbb80 732a010310b9ed00 bb60: ffffffffffffffff ffff0000080f777c ffff00000b7bbb80 ffff0000089ffb3c [<ffff0000089ffb3c>] composite_setup+0x44/0x1508 [<ffff000008a032fc>] android_setup+0xb8/0x13c [<ffff0000089bd9a8>] cdns3_ep0_delegate_req+0x44/0x70 [<ffff0000089bdff4>] cdns3_check_ep0_interrupt_proceed+0x33c/0x654 [<ffff0000089bca44>] cdns3_device_thread_irq_handler+0x4b0/0x4bc [<ffff0000089b77b4>] cdns3_thread_irq+0x48/0x68 [<ffff000008145bf0>] irq_thread_fn+0x28/0x88 [<ffff000008145e38>] irq_thread+0x13c/0x228 [<ffff0000080fed70>] kthread+0x104/0x130 [<ffff000008085064>] ret_from_fork+0x10/0x18 oops2: composite_disconnect: Calling disconnect on a Gadget that is not connected android_work: did not send uevent (0 0 (null)) init: Received control message 'stop' for 'adbd' from pid: 3359 (/vendor/bin/hw/[email protected]) init: Sending signal 9 to service 'adbd' (pid 22343) process group... ------------[ cut here ]------------ audit: audit_lost=180038 audit_rate_limit=5 audit_backlog_limit=64 audit: rate limit exceeded WARNING: CPU: 0 PID: 3468 at kernel_imx/drivers/usb/gadget/composite.c:2009 composite_disconnect+0x80/0x88 Modules linked in: CPU: 0 PID: 3468 Comm: HWC-UEvent-Thre Not tainted 4.14.98-07846-g0b40a9b-dirty thesofproject#16 Hardware name: Freescale i.MX8QM MEK (DT) task: ffff8008f2349c00 task.stack: ffff00000b0a8000 PC is at composite_disconnect+0x80/0x88 LR is at composite_disconnect+0x80/0x88 pc : [<ffff0000089ff9b0>] lr : [<ffff0000089ff9b0>] pstate: 600001c5 sp : ffff000008003dd0 x29: ffff000008003dd0 x28: ffff8008f2349c00 x27: ffff000009885018 x26: ffff000008004000 Timeout for IPC response! x25: ffff000009885018 x24: ffff000009c8e280 x23: ffff8008f2d98010 x22: 00000000000001c0 x21: ffff8008f2d98394 x20: ffff8008f2d98010 x19: 0000000000000000 x18: 0000e3956f4f075a fxos8700 4-001e: i2c block read acc failed x17: 0000e395735727e8 x16: ffff00000829f4d4 x15: ffffffffffffffff x14: 7463656e6e6f6320 x13: 746f6e2009090920 x12: 7369207461687420 x11: 7465676461472061 x10: 206e6f207463656e x9 : 6e6f637369642067 x8 : ffff000009c8e280 x7 : ffff0000086ca6cc x6 : ffff000009f15e78 x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffffffffffffff x2 : c3f28b86000c3900 x1 : c3f28b86000c3900 x0 : 000000000000004e X20: 0xffff8008f2d97f90: 7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 libprocessgroup: Failed to kill process cgroup uid 0 pid 22343 in 215ms, 1 processes remain 7fd0 Timeout for IPC response! 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 using random self ethernet address 7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc using random host ethernet address ffff0000 8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008 8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008 X21: 0xffff8008f2d98314: 8314 ffff8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8334 00000000 00000000 00000000 00000000 00000000 08a04cf4 ffff0000 00000000 8354 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8374 00000000 00000000 00000000 00001001 00000000 00000000 00000000 00000000 8394 e4bbe4bb 0f230000 ffff0000 0afae000 ffff0000 ae001000 00000000 f206d400 Timeout for IPC response! 83b4 ffff8008 00000000 00000000 f7957b18 ffff8008 f7957718 ffff8008 f7957018 83d4 ffff8008 f7957118 ffff8008 f7957618 ffff8008 f7957818 ffff8008 f7957918 83f4 ffff8008 f7957d18 ffff8008 00000000 00000000 00000000 00000000 00000000 X23: 0xffff8008f2d97f90: 7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008 8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc ffff0000 8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008 8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000 8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008 X28: 0xffff8008f2349b80: 9b80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9ba0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9bc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9be0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9c00 00000022 00000000 ffffffff ffffffff 00010001 00000000 00000000 00000000 9c20 0b0a8000 ffff0000 00000002 00404040 00000000 00000000 00000000 00000000 9c40 00000001 00000000 00000001 00000000 001ebd44 00000001 f390b800 ffff8008 9c60 00000000 00000001 00000070 00000070 00000070 00000000 09031d48 ffff0000 Call trace: Exception stack(0xffff000008003c90 to 0xffff000008003dd0) 3c80: 000000000000004e c3f28b86000c3900 3ca0: c3f28b86000c3900 ffffffffffffffff 0000000000000000 0000000000000000 3cc0: ffff000009f15e78 ffff0000086ca6cc ffff000009c8e280 6e6f637369642067 3ce0: 206e6f207463656e 7465676461472061 7369207461687420 746f6e2009090920 3d00: 7463656e6e6f6320 ffffffffffffffff ffff00000829f4d4 0000e395735727e8 3d20: 0000e3956f4f075a 0000000000000000 ffff8008f2d98010 ffff8008f2d98394 3d40: 00000000000001c0 ffff8008f2d98010 ffff000009c8e280 ffff000009885018 3d60: ffff000008004000 ffff000009885018 ffff8008f2349c00 ffff000008003dd0 3d80: ffff0000089ff9b0 ffff000008003dd0 ffff0000089ff9b0 00000000600001c5 3da0: ffff8008f33f2cd8 0000000000000000 0000ffffffffffff 0000000000000000 init: Received control message 'start' for 'adbd' from pid: 3359 (/vendor/bin/hw/[email protected]) 3dc0: ffff000008003dd0 ffff0000089ff9b0 [<ffff0000089ff9b0>] composite_disconnect+0x80/0x88 [<ffff000008a044d4>] android_disconnect+0x3c/0x68 [<ffff0000089ba9f8>] cdns3_device_irq_handler+0xfc/0x2c8 [<ffff0000089b84c0>] cdns3_irq+0x44/0x94 [<ffff00000814494c>] __handle_irq_event_percpu+0x60/0x24c [<ffff000008144c0c>] handle_irq_event+0x58/0xc0 [<ffff00000814873c>] handle_fasteoi_irq+0x98/0x180 [<ffff000008143a10>] generic_handle_irq+0x24/0x38 [<ffff000008144170>] __handle_domain_irq+0x60/0xac [<ffff0000080819c4>] gic_handle_irq+0xd4/0x17c Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Calling btrfs_qgroup_reserve_meta_prealloc from btrfs_delayed_inode_reserve_metadata can result in flushing delalloc while holding a transaction and delayed node locks. This is deadlock prone. In the past multiple commits: * ae5e070 ("btrfs: qgroup: don't try to wait flushing if we're already holding a transaction") * 6f23277 ("btrfs: qgroup: don't commit transaction when we already hold the handle") Tried to solve various aspects of this but this was always a whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock scenario involving btrfs_delayed_node::mutex. Namely, one thread can call btrfs_dirty_inode as a result of reading a file and modifying its atime: PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_timeout at ffffffffa52a1bdd #3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held #4 start_delalloc_inodes at ffffffffc0380db5 #5 btrfs_start_delalloc_snapshot at ffffffffc0393836 #6 try_flush_qgroup at ffffffffc03f04b2 #7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes. #8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex #9 btrfs_update_inode at ffffffffc0385ba8 #10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED #11 touch_atime at ffffffffa4cf0000 #12 generic_file_read_iter at ffffffffa4c1f123 #13 new_sync_read at ffffffffa4ccdc8a #14 vfs_read at ffffffffa4cd0849 #15 ksys_read at ffffffffa4cd0bd1 #16 do_syscall_64 at ffffffffa4a052eb #17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c This will cause an asynchronous work to flush the delalloc inodes to happen which can try to acquire the same delayed_node mutex: PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30" #0 __schedule at ffffffffa529e07d #1 schedule at ffffffffa529e4ff #2 schedule_preempt_disabled at ffffffffa529e80a #3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up. #4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex #5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding #6 cow_file_range_inline.constprop.78 at ffffffffc0386be7 #7 cow_file_range at ffffffffc03879c1 #8 btrfs_run_delalloc_range at ffffffffc038894c #9 writepage_delalloc at ffffffffc03a3c8f #10 __extent_writepage at ffffffffc03a4c01 #11 extent_write_cache_pages at ffffffffc03a500b #12 extent_writepages at ffffffffc03a6de2 #13 do_writepages at ffffffffa4c277eb #14 __filemap_fdatawrite_range at ffffffffa4c1e5bb #15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes #16 normal_work_helper at ffffffffc03b706c #17 process_one_work at ffffffffa4aba4e4 #18 worker_thread at ffffffffa4aba6fd #19 kthread at ffffffffa4ac0a3d #20 ret_from_fork at ffffffffa54001ff To fully address those cases the complete fix is to never issue any flushing while holding the transaction or the delayed node lock. This patch achieves it by calling qgroup_reserve_meta directly which will either succeed without flushing or will fail and return -EDQUOT. In the latter case that return value is going to be propagated to btrfs_dirty_inode which will fallback to start a new transaction. That's fine as the majority of time we expect the inode will have BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly copying the in-memory state. Fixes: c53e965 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT") CC: [email protected] # 5.10+ Reviewed-by: Qu Wenruo <[email protected]> Signed-off-by: Nikolay Borisov <[email protected]> Signed-off-by: David Sterba <[email protected]>

Routes are currently processed from a workqueue whereas nexthop objects are processed in system call context. This can result in the driver not finding a suitable nexthop group for a route and issuing a warning [1]. Fix this by ignoring such routes earlier in the process. The subsequent deletion notification will be ignored as well. [1] WARNING: CPU: 2 PID: 7754 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4853 mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum] [...] CPU: 2 PID: 7754 Comm: kworker/u8:0 Not tainted 5.11.0-rc6-cq-20210207-1 #16 Hardware name: Mellanox Technologies Ltd. MSN2100/SA001390, BIOS 5.6.5 05/24/2018 Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib_event_work [mlxsw_spectrum] RIP: 0010:mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum] Fixes: cdd6cfc ("mlxsw: spectrum_router: Allow programming routes with nexthop objects") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: Alex Veber <[email protected]> Tested-by: Alex Veber <[email protected]> Reviewed-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>

The evlist and the cpu/thread maps should be released together. Otherwise following error was reported by Asan. Note that this test still has memory leaks in DSOs so it still fails even after this change. I'll take a look at that too. # perf test -v 26 26: Object code reading : --- start --- test child forked, pid 154184 Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. symsrc__init: cannot get elf header. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols Parsing event 'cycles' mmap size 528384B ... ================================================================= ==154184==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fcb66e77037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x55ad9b7e821e in dso__new_id util/dso.c:1256 #2 0x55ad9b8cfd4a in __machine__addnew_vdso util/vdso.c:132 #3 0x55ad9b8cfd4a in machine__findnew_vdso util/vdso.c:347 #4 0x55ad9b845b7e in map__new util/map.c:176 #5 0x55ad9b8415a2 in machine__process_mmap2_event util/machine.c:1787 #6 0x55ad9b8fab16 in perf_tool__process_synth_event util/synthetic-events.c:64 #7 0x55ad9b8fab16 in perf_event__synthesize_mmap_events util/synthetic-events.c:499 #8 0x55ad9b8fbfdf in __event__synthesize_thread util/synthetic-events.c:741 #9 0x55ad9b8ff3e3 in perf_event__synthesize_thread_map util/synthetic-events.c:833 #10 0x55ad9b738585 in do_test_code_reading tests/code-reading.c:608 #11 0x55ad9b73b25d in test__code_reading tests/code-reading.c:722 #12 0x55ad9b6f28fb in run_test tests/builtin-test.c:428 #13 0x55ad9b6f28fb in test_and_print tests/builtin-test.c:458 #14 0x55ad9b6f4a53 in __cmd_test tests/builtin-test.c:679 #15 0x55ad9b6f4a53 in cmd_test tests/builtin-test.c:825 #16 0x55ad9b760cc4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 #17 0x55ad9b5eaa88 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 #18 0x55ad9b5eaa88 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 #19 0x55ad9b5eaa88 in main /home/namhyung/project/linux/tools/perf/perf.c:539 #20 0x7fcb669acd09 in __libc_start_main ../csu/libc-start.c:308 ... SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). test child finished with 1 ---- end ---- Object code reading: FAILED! Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

I got several memory leak reports from Asan with a simple command. It was because VDSO is not released due to the refcount. Like in __dsos_addnew_id(), it should put the refcount after adding to the list. $ perf record true [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ] ================================================================= ==692599==ERROR: LeakSanitizer: detected memory leaks Direct leak of 439 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce4aa8ee in dso__new_id util/dso.c:1256 #2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132 #3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347 #4 0x559bce50826c in map__new util/map.c:175 thesofproject#5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 thesofproject#6 0x559bce512f6b in machines__deliver_event util/session.c:1481 thesofproject#7 0x559bce515107 in perf_session__deliver_event util/session.c:1551 thesofproject#8 0x559bce51d4d2 in do_flush util/ordered-events.c:244 thesofproject#9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 thesofproject#10 0x559bce519bea in __perf_session__process_events util/session.c:2268 thesofproject#11 0x559bce519bea in perf_session__process_events util/session.c:2297 thesofproject#12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 thesofproject#13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 thesofproject#14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 thesofproject#15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 thesofproject#16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 thesofproject#17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 thesofproject#18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 thesofproject#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 thesofproject#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 Indirect leak of 32 byte(s) in 1 object(s) allocated from: #0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154 #1 0x559bce520907 in nsinfo__copy util/namespaces.c:169 #2 0x559bce50821b in map__new util/map.c:168 #3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787 #4 0x559bce512f6b in machines__deliver_event util/session.c:1481 thesofproject#5 0x559bce515107 in perf_session__deliver_event util/session.c:1551 thesofproject#6 0x559bce51d4d2 in do_flush util/ordered-events.c:244 thesofproject#7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323 thesofproject#8 0x559bce519bea in __perf_session__process_events util/session.c:2268 thesofproject#9 0x559bce519bea in perf_session__process_events util/session.c:2297 thesofproject#10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017 thesofproject#11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234 thesofproject#12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026 thesofproject#13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858 thesofproject#14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313 thesofproject#15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365 thesofproject#16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409 thesofproject#17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539 thesofproject#18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s). Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Add CI

When calling the 'ql_sem_spinlock', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. The KASAN's log reveals it: [ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002 [ 3.238748 ] 2 locks held by swapper/0/1: [ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x41/0x60 [ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at: ql3xxx_probe+0x2aa/0xea0 [ 3.240873 ] Modules linked in: [ 3.241187 ] irq event stamp: 460854 [ 3.241541 ] hardirqs last enabled at (460853): [<ffffffff843051bf>] _raw_spin_unlock_irqrestore+0x4f/0x70 [ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>] _raw_spin_lock_irqsave+0x2a/0x70 [ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>] __do_softirq+0x2e4/0x4b1 [ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>] irq_exit_rcu+0x100/0x110 [ 3.242245 ] Preemption disabled at: [ 3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] Kernel panic - not syncing: scheduling while atomic [ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00145 -gee7dc339169-dirty #16 [ 3.242245 ] Call Trace: [ 3.242245 ] dump_stack+0xba/0xf5 [ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0 [ 3.242245 ] panic+0x15a/0x3f2 [ 3.242245 ] ? vprintk+0x76/0x150 [ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] __schedule_bug+0xae/0xe0 [ 3.242245 ] __schedule+0x72e/0xa00 [ 3.242245 ] schedule+0x43/0xf0 [ 3.242245 ] schedule_timeout+0x28b/0x500 [ 3.242245 ] ? del_timer_sync+0xf0/0xf0 [ 3.242245 ] ? msleep+0x2f/0x70 [ 3.242245 ] msleep+0x59/0x70 [ 3.242245 ] ql3xxx_probe+0x307/0xea0 [ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70 [ 3.242245 ] ? pci_device_remove+0x110/0x110 [ 3.242245 ] local_pci_probe+0x45/0xa0 [ 3.242245 ] pci_device_probe+0x12b/0x1d0 [ 3.242245 ] really_probe+0x2a9/0x610 [ 3.242245 ] driver_probe_device+0x90/0x1d0 [ 3.242245 ] ? mutex_lock_nested+0x1b/0x20 [ 3.242245 ] device_driver_attach+0x68/0x70 [ 3.242245 ] __driver_attach+0x124/0x1b0 [ 3.242245 ] ? device_driver_attach+0x70/0x70 [ 3.242245 ] bus_for_each_dev+0xbb/0x110 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] driver_attach+0x27/0x30 [ 3.242245 ] bus_add_driver+0x1eb/0x2a0 [ 3.242245 ] driver_register+0xa9/0x180 [ 3.242245 ] __pci_register_driver+0x82/0x90 [ 3.242245 ] ? yellowfin_init+0x25/0x25 [ 3.242245 ] ql3xxx_driver_init+0x23/0x25 [ 3.242245 ] do_one_initcall+0x7f/0x3d0 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.242245 ] kernel_init_freeable+0x2aa/0x301 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] kernel_init+0x18/0x190 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ret_from_fork+0x1f/0x30 [ 3.242245 ] Dumping ftrace buffer: [ 3.242245 ] (ftrace buffer empty) [ 3.242245 ] Kernel Offset: disabled [ 3.242245 ] Rebooting in 1 seconds. Reported-by: Zheyu Ma <[email protected]> Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: David S. Miller <[email protected]>

There is a panic in socket ioctl cmd SIOCGSKNS when NET_NS is not enabled. The reason is that nsfs tries to access ns->ops but the proc_ns_operations is not implemented in this case. [7.670023] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [7.670268] pgd = 32b54000 [7.670544] [00000010] *pgd=00000000 [7.671861] Internal error: Oops: 5 [#1] SMP ARM [7.672315] Modules linked in: [7.672918] CPU: 0 PID: 1 Comm: systemd Not tainted 5.13.0-rc3-00375-g6799d4f2da49 thesofproject#16 [7.673309] Hardware name: Generic DT based system [7.673642] PC is at nsfs_evict+0x24/0x30 [7.674486] LR is at clear_inode+0x20/0x9c The same to tun SIOCGSKNS command. To fix this problem, we make get_net_ns() return -EINVAL when NET_NS is disabled. Meanwhile move it to right place net/core/net_namespace.c. Signed-off-by: Changbin Du <[email protected]> Fixes: c62cce2 ("net: add an ioctl to get a socket network namespace") Cc: Cong Wang <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: David Laight <[email protected]> Cc: Christian Brauner <[email protected]> Suggested-by: Jakub Kicinski <[email protected]> Acked-by: Christian Brauner <[email protected]> Signed-off-by: David S. Miller <[email protected]>

ASan reports a heap-buffer-overflow in elf_sec__is_text when using perf-top. The bug is caused by the fact that secstrs is built from runtime_ss, while shdr is built from syms_ss if shdr.sh_type != SHT_NOBITS. Therefore, they point to two different ELF files. This patch renames secstrs to secstrs_run and adds secstrs_sym, so that the correct secstrs is chosen depending on shdr.sh_type. $ ASAN_OPTIONS=abort_on_error=1:disable_coredump=0:unmap_shadow_on_exit=1 ./perf top ================================================================= ==363148==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x61300009add6 at pc 0x00000049875c bp 0x7f4f56446440 sp 0x7f4f56445bf0 READ of size 1 at 0x61300009add6 thread T6 #0 0x49875b in StrstrCheck(void*, char*, char const*, char const*) (/home/user/linux/tools/perf/perf+0x49875b) #1 0x4d13a2 in strstr (/home/user/linux/tools/perf/perf+0x4d13a2) #2 0xacae36 in elf_sec__is_text /home/user/linux/tools/perf/util/symbol-elf.c:176:9 #3 0xac3ec9 in elf_sec__filter /home/user/linux/tools/perf/util/symbol-elf.c:187:9 #4 0xac2c3d in dso__load_sym /home/user/linux/tools/perf/util/symbol-elf.c:1254:20 thesofproject#5 0x883981 in dso__load /home/user/linux/tools/perf/util/symbol.c:1897:9 thesofproject#6 0x8e6248 in map__load /home/user/linux/tools/perf/util/map.c:332:7 thesofproject#7 0x8e66e5 in map__find_symbol /home/user/linux/tools/perf/util/map.c:366:6 thesofproject#8 0x7f8278 in machine__resolve /home/user/linux/tools/perf/util/event.c:707:13 thesofproject#9 0x5f3d1a in perf_event__process_sample /home/user/linux/tools/perf/builtin-top.c:773:6 thesofproject#10 0x5f30e4 in deliver_event /home/user/linux/tools/perf/builtin-top.c:1197:3 thesofproject#11 0x908a72 in do_flush /home/user/linux/tools/perf/util/ordered-events.c:244:9 thesofproject#12 0x905fae in __ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:323:8 thesofproject#13 0x9058db in ordered_events__flush /home/user/linux/tools/perf/util/ordered-events.c:341:9 thesofproject#14 0x5f19b1 in process_thread /home/user/linux/tools/perf/builtin-top.c:1109:7 thesofproject#15 0x7f4f6a21a298 in start_thread /usr/src/debug/glibc-2.33-16.fc34.x86_64/nptl/pthread_create.c:481:8 thesofproject#16 0x7f4f697d0352 in clone ../sysdeps/unix/sysv/linux/x86_64/clone.S:95 0x61300009add6 is located 10 bytes to the right of 332-byte region [0x61300009ac80,0x61300009adcc) allocated by thread T6 here: #0 0x4f3f7f in malloc (/home/user/linux/tools/perf/perf+0x4f3f7f) #1 0x7f4f6a0a88d9 (/lib64/libelf.so.1+0xa8d9) Thread T6 created by T0 here: #0 0x464856 in pthread_create (/home/user/linux/tools/perf/perf+0x464856) #1 0x5f06e0 in __cmd_top /home/user/linux/tools/perf/builtin-top.c:1309:6 #2 0x5ef19f in cmd_top /home/user/linux/tools/perf/builtin-top.c:1762:11 #3 0x7b28c0 in run_builtin /home/user/linux/tools/perf/perf.c:313:11 #4 0x7b119f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8 thesofproject#5 0x7b2423 in run_argv /home/user/linux/tools/perf/perf.c:409:2 thesofproject#6 0x7b0c19 in main /home/user/linux/tools/perf/perf.c:539:3 thesofproject#7 0x7f4f696f7b74 in __libc_start_main /usr/src/debug/glibc-2.33-16.fc34.x86_64/csu/../csu/libc-start.c:332:16 SUMMARY: AddressSanitizer: heap-buffer-overflow (/home/user/linux/tools/perf/perf+0x49875b) in StrstrCheck(void*, char*, char const*, char const*) Shadow bytes around the buggy address: 0x0c268000b560: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b570: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b590: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>0x0c268000b5b0: 00 00 00 00 00 00 00 00 00 04[fa]fa fa fa fa fa 0x0c268000b5c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 0x0c268000b5d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0c268000b5f0: 07 fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x0c268000b600: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb Shadow gap: cc ==363148==ABORTING Suggested-by: Jiri Slaby <[email protected]> Signed-off-by: Riccardo Mancini <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Fabian Hemmer <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Jiri Slaby <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Remi Bernon <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

It's later supposed to be either a correct address or NULL. Without the initialization, it may contain an undefined value which results in the following segmentation fault: # perf top --sort comm -g --ignore-callees=do_idle terminates with: #0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6 thesofproject#1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6 thesofproject#2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489 thesofproject#3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564 thesofproject#4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420, sample_self=sample_self@entry=true) at util/hist.c:657 thesofproject#5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0, sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288 thesofproject#6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38) at util/hist.c:1056 thesofproject#7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056 thesofproject#8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0) at util/hist.c:1231 thesofproject#9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0) at builtin-top.c:842 thesofproject#10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202 thesofproject#11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244 thesofproject#12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323 thesofproject#13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339 thesofproject#14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341 thesofproject#15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339 thesofproject#16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114 thesofproject#17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0 thesofproject#18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6 If you look at the frame thesofproject#2, the code is: 488 if (he->srcline) { 489 he->srcline = strdup(he->srcline); 490 if (he->srcline == NULL) 491 goto err_rawdata; 492 } If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish), it gets strdupped and strdupping a rubbish random string causes the problem. Also, if you look at the commit 1fb7d06, it adds the srcline property into the struct, but not initializing it everywhere needed. Committer notes: Now I see, when using --ignore-callees=do_idle we end up here at line 2189 in add_callchain_ip(): 2181 if (al.sym != NULL) { 2182 if (perf_hpp_list.parent && !*parent && 2183 symbol__match_regex(al.sym, &parent_regex)) 2184 *parent = al.sym; 2185 else if (have_ignore_callees && root_al && 2186 symbol__match_regex(al.sym, &ignore_callees_regex)) { 2187 /* Treat this symbol as the root, 2188 forgetting its callees. */ 2189 *root_al = al; 2190 callchain_cursor_reset(cursor); 2191 } 2192 } And the al that doesn't have the ->srcline field initialized will be copied to the root_al, so then, back to: 1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al, 1212 int max_stack_depth, void *arg) 1213 { 1214 int err, err2; 1215 struct map *alm = NULL; 1216 1217 if (al) 1218 alm = map__get(al->map); 1219 1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent, 1221 iter->evsel, al, max_stack_depth); 1222 if (err) { 1223 map__put(alm); 1224 return err; 1225 } 1226 1227 err = iter->ops->prepare_entry(iter, al); 1228 if (err) 1229 goto out; 1230 1231 err = iter->ops->add_single_entry(iter, al); 1232 if (err) 1233 goto out; 1234 That al at line 1221 is what hist_entry_iter__add() (called from sample__resolve_callchain()) saw as 'root_al', and then: iter->ops->add_single_entry(iter, al); will go on with al->srcline with a bogus value, I'll add the above sequence to the cset and apply, thanks! Signed-off-by: Michael Petlan <[email protected]> CC: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 1fb7d06 ("perf report Use srcline from callchain for hist entries") Link: https //lore.kernel.org/r/[email protected] Reported-by: Juri Lelli <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

[BUG] There is a bug report that injected ENOMEM error could leave a tree block locked while we return to user-space: BTRFS info (device loop0): enabling ssd optimizations FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 0 PID: 7579 Comm: syz-executor Not tainted 5.15.0-rc1 thesofproject#16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106 fail_dump lib/fault-inject.c:52 [inline] should_fail+0x13c/0x160 lib/fault-inject.c:146 should_failslab+0x5/0x10 mm/slab_common.c:1328 slab_pre_alloc_hook.constprop.99+0x4e/0xc0 mm/slab.h:494 slab_alloc_node mm/slub.c:3120 [inline] slab_alloc mm/slub.c:3214 [inline] kmem_cache_alloc+0x44/0x280 mm/slub.c:3219 btrfs_alloc_delayed_extent_op fs/btrfs/delayed-ref.h:299 [inline] btrfs_alloc_tree_block+0x38c/0x670 fs/btrfs/extent-tree.c:4833 __btrfs_cow_block+0x16f/0x7d0 fs/btrfs/ctree.c:415 btrfs_cow_block+0x12a/0x300 fs/btrfs/ctree.c:570 btrfs_search_slot+0x6b0/0xee0 fs/btrfs/ctree.c:1768 btrfs_insert_empty_items+0x80/0xf0 fs/btrfs/ctree.c:3905 btrfs_new_inode+0x311/0xa60 fs/btrfs/inode.c:6530 btrfs_create+0x12b/0x270 fs/btrfs/inode.c:6783 lookup_open+0x660/0x780 fs/namei.c:3282 open_last_lookups fs/namei.c:3352 [inline] path_openat+0x465/0xe20 fs/namei.c:3557 do_filp_open+0xe3/0x170 fs/namei.c:3588 do_sys_openat2+0x357/0x4a0 fs/open.c:1200 do_sys_open+0x87/0xd0 fs/open.c:1216 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x34/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x46ae99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f46711b9c48 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 000000000078c0a0 RCX: 000000000046ae99 RDX: 0000000000000000 RSI: 00000000000000a1 RDI: 0000000020005800 RBP: 00007f46711b9c80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000017 R13: 0000000000000000 R14: 000000000078c0a0 R15: 00007ffc129da6e0 ================================================ WARNING: lock held when returning to user space! 5.15.0-rc1 thesofproject#16 Not tainted ------------------------------------------------ syz-executor/7579 is leaving the kernel with locks still held! 1 lock held by syz-executor/7579: #0: ffff888104b73da8 (btrfs-tree-01/1){+.+.}-{3:3}, at: __btrfs_tree_lock+0x2e/0x1a0 fs/btrfs/locking.c:112 [CAUSE] In btrfs_alloc_tree_block(), after btrfs_init_new_buffer(), the new extent buffer @buf is locked, but if later operations like adding delayed tree ref fail, we just free @buf without unlocking it, resulting above warning. [FIX] Unlock @buf in out_free_buf: label. Reported-by: Hao Sun <[email protected]> Link: https://lore.kernel.org/linux-btrfs/CACkBjsZ9O6Zr0KK1yGn=1rQi6Crh1yeCRdTSBxx9R99L4xdn-Q@mail.gmail.com/ CC: [email protected] # 5.4+ Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>

The exit function fixes a memory leak with the src field as detected by leak sanitizer. An example of which is: Indirect leak of 25133184 byte(s) in 207 object(s) allocated from: #0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154 thesofproject#1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803 thesofproject#2 0x55defe6397e4 in symbol__hists util/annotate.c:952 thesofproject#3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968 thesofproject#4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119 thesofproject#5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182 thesofproject#6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236 thesofproject#7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315 thesofproject#8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473 thesofproject#9 0x55defe731e38 in machines__deliver_event util/session.c:1510 thesofproject#10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590 thesofproject#11 0x55defe72951e in ordered_events__deliver_event util/session.c:183 thesofproject#12 0x55defe740082 in do_flush util/ordered-events.c:244 thesofproject#13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323 thesofproject#14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341 thesofproject#15 0x55defe73837f in __perf_session__process_events util/session.c:2390 thesofproject#16 0x55defe7385ff in perf_session__process_events util/session.c:2420 ... Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin Liška <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

…g the sock [ Upstream commit 3cf7203 ] There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 thesofproject#1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d thesofproject#2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 thesofproject#3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b thesofproject#4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb thesofproject#5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 thesofproject#6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 thesofproject#7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] thesofproject#8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 thesofproject#9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 thesofproject#10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 thesofproject#11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 thesofproject#12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde thesofproject#13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b thesofproject#14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 thesofproject#15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a thesofproject#16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 thesofproject#17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca thesofproject#18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock. Reported-by: Jianlin Shi <[email protected]> Suggested-by: Jakub Sitnicki <[email protected]> Fixes: 6a93cc9 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

Set kprobe at 'jalr 1140(ra)' of vfs_write results in the following crash: [ 32.092235] Unable to handle kernel access to user memory without uaccess routines at virtual address 00aaaaaad77b1170 [ 32.093115] Oops [thesofproject#1] [ 32.093251] Modules linked in: [ 32.093626] CPU: 0 PID: 135 Comm: ftracetest Not tainted 6.2.0-rc2-00013-gb0aa5e5df0cb-dirty thesofproject#16 [ 32.093985] Hardware name: riscv-virtio,qemu (DT) [ 32.094280] epc : ksys_read+0x88/0xd6 [ 32.094855] ra : ksys_read+0xc0/0xd6 [ 32.095016] epc : ffffffff801cda80 ra : ffffffff801cdab8 sp : ff20000000d7bdc0 [ 32.095227] gp : ffffffff80f14000 tp : ff60000080f9cb40 t0 : ffffffff80f13e80 [ 32.095500] t1 : ffffffff8000c29c t2 : ffffffff800dbc54 s0 : ff20000000d7be60 [ 32.095716] s1 : 0000000000000000 a0 : ffffffff805a64ae a1 : ffffffff80a83708 [ 32.095921] a2 : ffffffff80f160a0 a3 : 0000000000000000 a4 : f229b0afdb165300 [ 32.096171] a5 : f229b0afdb165300 a6 : ffffffff80eeebd0 a7 : 00000000000003ff [ 32.096411] s2 : ff6000007ff76800 s3 : fffffffffffffff7 s4 : 00aaaaaad77b1170 [ 32.096638] s5 : ffffffff80f160a0 s6 : ff6000007ff76800 s7 : 0000000000000030 [ 32.096865] s8 : 00ffffffc3d97be0 s9 : 0000000000000007 s10: 00aaaaaad77c9410 [ 32.097092] s11: 0000000000000000 t3 : ffffffff80f13e48 t4 : ffffffff8000c29c [ 32.097317] t5 : ffffffff8000c29c t6 : ffffffff800dbc54 [ 32.097505] status: 0000000200000120 badaddr: 00aaaaaad77b1170 cause: 000000000000000d [ 32.098011] [<ffffffff801cdb72>] ksys_write+0x6c/0xd6 [ 32.098222] [<ffffffff801cdc06>] sys_write+0x2a/0x38 [ 32.098405] [<ffffffff80003c76>] ret_from_syscall+0x0/0x2 Since the rs1 and rd might be the same one, such as 'jalr 1140(ra)', hence it requires obtaining the target address from rs1 followed by updating rd. Fixes: c22b0bc ("riscv: Add kprobes supported") Signed-off-by: Liao Chang <[email protected]> Reviewed-by: Guo Ren <[email protected]> Link: https://lore.kernel.org/r/[email protected] [Palmer: Pick Guo's cleanup] Signed-off-by: Palmer Dabbelt <[email protected]>

For a similar reason as commit f2c7ca8 ("drm/atomic-helper: Don't set deadline for modesets"), we need the crtc to be already active in order to compute a target vblank time for an async commit. Otherwise we get this splat reminding us that we are doing it wrong: ------------[ cut here ]------------ msm_dpu ae01000.mdp: drm_WARN_ON_ONCE(drm_drv_uses_atomic_modeset(dev)) WARNING: CPU: 7 PID: 1923 at drivers/gpu/drm/drm_vblank.c:728 drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x148/0x370 Modules linked in: snd_seq_dummy snd_seq snd_seq_device bridge stp llc tun vhost_vsock vhost vhost_iotlb vmw_vsock_virtio_transport_common vsock uinput rfcomm algif_hash algif_skcipher af_alg veth venus_dec venus_enc cros_ec_typec typec qcom_spmi_temp_alarm qcom_spmi_adc_tm5 qcom_spmi_adc5 xt_cgroup qcom_vadc_common qcom_stats hci_uart btqca xt_MASQUERADE venus_core 8021q coresight_tmc coresight_funnel coresight_etm4x coresight_replicator snd_soc_lpass_sc7180 coresight snd_soc_sc7180 ip6table_nat fuse ath10k_snoc ath10k_core ath mac80211 iio_trig_sysfs bluetooth cfg80211 cros_ec_sensors cros_ec_sensors_core ecdh_generic industrialio_triggered_buffer ecc kfifo_buf cros_ec_sensorhub r8153_ecm cdc_ether usbnet r8152 mii lzo_rle lzo_compress zram hid_vivaldi hid_google_hammer hid_vivaldi_common joydev CPU: 7 PID: 1923 Comm: DrmThread Not tainted 5.15.107-18853-g3be267609a0b-dirty #16 a1ffc1a66e79c21c3536d8c9a42e819236e39714 Hardware name: Google Wormdingler rev1+ BOE panel board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x148/0x370 lr : drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x144/0x370 sp : ffffffc012e2b800 x29: ffffffc012e2b840 x28: ffffff8083676094 x27: ffffffc012e2bb28 x26: ffffff8084539800 x25: 0000000000000000 x24: ffffff8083676000 x23: ffffffd3c8cdc5a0 x22: ffffff80845b9d00 x21: ffffffc012e2b8b4 x20: ffffffc012e2b910 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000010 x15: ffffffd3c8451a88 x14: 0000000000000003 x13: 0000000000000004 x12: 0000000000000001 x11: c0000000ffffdfff x10: ffffffd3c973ef58 x9 : 8ea3526b3cc95900 x8 : 8ea3526b3cc95900 x7 : 0000000000000000 x6 : 000000000000003a x5 : ffffffd3c99676cd x4 : 0000000000000000 x3 : ffffffc012e2b4b8 x2 : ffffffc012e2b4c0 x1 : 00000000ffffdfff x0 : 0000000000000000 Call trace: drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x148/0x370 drm_crtc_vblank_helper_get_vblank_timestamp+0x20/0x30 drm_crtc_get_last_vbltimestamp+0x68/0xb0 drm_crtc_next_vblank_start+0x5c/0xa8 msm_atomic_commit_tail+0x264/0x664 commit_tail+0xac/0x160 drm_atomic_helper_commit+0x160/0x168 drm_atomic_commit+0xfc/0x128 drm_atomic_helper_disable_plane+0x8c/0x110 __setplane_atomic+0x10c/0x138 drm_mode_cursor_common+0x3a8/0x410 drm_mode_cursor_ioctl+0x48/0x70 drm_ioctl_kernel+0xe0/0x158 drm_ioctl+0x25c/0x4d8 __arm64_sys_ioctl+0x98/0xd0 invoke_syscall+0x4c/0x100 el0_svc_common+0x98/0x104 do_el0_svc+0x30/0x90 el0_svc+0x20/0x50 el0t_64_sync_handler+0x78/0x108 el0t_64_sync+0x1a4/0x1a8 ---[ end trace a0f587e1ab9589e8 ]--- Fixes: 52ff0d3 ("drm/msm/atomic: Switch to vblank_start helper") Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/532727/ Link: https://lore.kernel.org/r/[email protected]

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc #12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] #13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] #14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] #15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] #16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] #17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Aaron Conole <[email protected]> Signed-off-by: David S. Miller <[email protected]>

kernel test robot reported slab-out-of-bounds access in strlen(). [0] Commit 06d4c8a ("af_unix: Fix fortify_panic() in unix_bind_bsd().") removed unix_mkname_bsd() call in unix_bind_bsd(). If sunaddr->sun_path is not terminated by user and we don't enable CONFIG_INIT_STACK_ALL_ZERO=y, strlen() will do the out-of-bounds access during file creation. Let's go back to strlen()-with-sockaddr_storage way and pack all 108 trickiness into unix_mkname_bsd() with bold comments. [0]: BUG: KASAN: slab-out-of-bounds in strlen (lib/string.c:?) Read of size 1 at addr ffff000015492777 by task fortify_strlen_/168 CPU: 0 PID: 168 Comm: fortify_strlen_ Not tainted 6.5.0-rc1-00333-g3329b603ebba #16 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:235) show_stack (arch/arm64/kernel/stacktrace.c:242) dump_stack_lvl (lib/dump_stack.c:107) print_report (mm/kasan/report.c:365 mm/kasan/report.c:475) kasan_report (mm/kasan/report.c:590) __asan_report_load1_noabort (mm/kasan/report_generic.c:378) strlen (lib/string.c:?) getname_kernel (./include/linux/fortify-string.h:? fs/namei.c:226) kern_path_create (fs/namei.c:3926) unix_bind (net/unix/af_unix.c:1221 net/unix/af_unix.c:1324) __sys_bind (net/socket.c:1792) __arm64_sys_bind (net/socket.c:1801) invoke_syscall (arch/arm64/kernel/syscall.c:? arch/arm64/kernel/syscall.c:52) el0_svc_common (./include/linux/thread_info.h:127 arch/arm64/kernel/syscall.c:147) do_el0_svc (arch/arm64/kernel/syscall.c:189) el0_svc (./arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:144 arch/arm64/kernel/entry-common.c:648) el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:?) el0t_64_sync (arch/arm64/kernel/entry.S:591) Allocated by task 168: kasan_set_track (mm/kasan/common.c:45 mm/kasan/common.c:52) kasan_save_alloc_info (mm/kasan/generic.c:512) __kasan_kmalloc (mm/kasan/common.c:383) __kmalloc (mm/slab_common.c:? mm/slab_common.c:998) unix_bind (net/unix/af_unix.c:257 net/unix/af_unix.c:1213 net/unix/af_unix.c:1324) __sys_bind (net/socket.c:1792) __arm64_sys_bind (net/socket.c:1801) invoke_syscall (arch/arm64/kernel/syscall.c:? arch/arm64/kernel/syscall.c:52) el0_svc_common (./include/linux/thread_info.h:127 arch/arm64/kernel/syscall.c:147) do_el0_svc (arch/arm64/kernel/syscall.c:189) el0_svc (./arch/arm64/include/asm/daifflags.h:28 arch/arm64/kernel/entry-common.c:133 arch/arm64/kernel/entry-common.c:144 arch/arm64/kernel/entry-common.c:648) el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:?) el0t_64_sync (arch/arm64/kernel/entry.S:591) The buggy address belongs to the object at ffff000015492700 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 0 bytes to the right of allocated 119-byte region [ffff000015492700, ffff000015492777) The buggy address belongs to the physical page: page:00000000aeab52ba refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x55492 anon flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff) page_type: 0xffffffff() raw: 03fffc0000000200 ffff0000084018c0 fffffc00003d0e00 0000000000000005 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff000015492600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff000015492680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff000015492700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 fc ^ ffff000015492780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff000015492800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 06d4c8a ("af_unix: Fix fortify_panic() in unix_bind_bsd().") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Christoph Biedl reported early OOM on recent kernels: swapper: page allocation failure: order:0, mode:0x100(__GFP_ZERO), nodemask=(null) CPU: 0 PID: 0 Comm: swapper Not tainted 6.3.0-rc4+ #16 Hardware name: 9000/785/C3600 Backtrace: [<10408594>] show_stack+0x48/0x5c [<10e152d8>] dump_stack_lvl+0x48/0x64 [<10e15318>] dump_stack+0x24/0x34 [<105cf7f8>] warn_alloc+0x10c/0x1c8 [<105d068c>] __alloc_pages+0xbbc/0xcf8 [<105d0e4c>] __get_free_pages+0x28/0x78 [<105ad10c>] __pte_alloc_kernel+0x30/0x98 [<10406934>] set_fixmap+0xec/0xf4 [<10411ad4>] patch_map.constprop.0+0xa8/0xdc [<10411bb0>] __patch_text_multiple+0xa8/0x208 [<10411d78>] patch_text+0x30/0x48 [<1041246c>] arch_jump_label_transform+0x90/0xcc [<1056f734>] jump_label_update+0xd4/0x184 [<1056fc9c>] static_key_enable_cpuslocked+0xc0/0x110 [<1056fd08>] static_key_enable+0x1c/0x2c [<1011362c>] init_mem_debugging_and_hardening+0xdc/0xf8 [<1010141c>] start_kernel+0x5f0/0xa98 [<10105da8>] start_parisc+0xb8/0xe4 Mem-Info: active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:0 dirty:0 writeback:0 slab_reclaimable:0 slab_unreclaimable:0 mapped:0 shmem:0 pagetables:0 sec_pagetables:0 bounce:0 kernel_misc_reclaimable:0 free:0 free_pcp:0 free_cma:0 Node 0 active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:0kB dirty:0kB writeback:0kB shmem:0kB +writeback_tmp:0kB kernel_stack:0kB pagetables:0kB sec_pagetables:0kB all_unreclaimable? no Normal free:0kB boost:0kB min:0kB low:0kB high:0kB reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB +present:1048576kB managed:1039360kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 0 Normal: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB 0 total pagecache pages 0 pages in swap cache Free swap = 0kB Total swap = 0kB 262144 pages RAM 0 pages HighMem/MovableOnly 2304 pages reserved Backtrace: [<10411d78>] patch_text+0x30/0x48 [<1041246c>] arch_jump_label_transform+0x90/0xcc [<1056f734>] jump_label_update+0xd4/0x184 [<1056fc9c>] static_key_enable_cpuslocked+0xc0/0x110 [<1056fd08>] static_key_enable+0x1c/0x2c [<1011362c>] init_mem_debugging_and_hardening+0xdc/0xf8 [<1010141c>] start_kernel+0x5f0/0xa98 [<10105da8>] start_parisc+0xb8/0xe4 Kernel Fault: Code=15 (Data TLB miss fault) at addr 0f7fe3c0 CPU: 0 PID: 0 Comm: swapper Not tainted 6.3.0-rc4+ #16 Hardware name: 9000/785/C3600 This happens because patching static key code temporarily maps it via fixmap and if it happens before page allocator is initialized set_fixmap() cannot allocate memory using pte_alloc_kernel(). Make sure that fixmap page tables are preallocated early so that pte_offset_kernel() in set_fixmap() never resorts to pte allocation. Signed-off-by: Mike Rapoport (IBM) <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Signed-off-by: Helge Deller <[email protected]> Tested-by: Christoph Biedl <[email protected]> Tested-by: John David Anglin <[email protected]> Cc: <[email protected]> # v6.4+

The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]>

Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 #1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 #2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 #3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 #4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 #5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 #6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 #7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 #8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 #9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 #10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 #11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 #12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 #13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 #14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 #15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 #16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 #17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Kan Liang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>

…alid If smb2 request from client is invalid, The following kernel oops could happen. The patch e2b76ab: "ksmbd: add support for read compound" leads this issue. When request is invalid, It doesn't set anything in the response buffer. This patch add missing set invalid parameter error response. [ 673.085542] ksmbd: cli req too short, len 184 not 142. cmd:5 mid:109 [ 673.085580] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 673.085591] #PF: supervisor read access in kernel mode [ 673.085600] #PF: error_code(0x0000) - not-present page [ 673.085608] PGD 0 P4D 0 [ 673.085620] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 673.085631] CPU: 3 PID: 1039 Comm: kworker/3:0 Not tainted 6.6.0-rc2-tmt #16 [ 673.085643] Hardware name: AZW U59/U59, BIOS JTKT001 05/05/2022 [ 673.085651] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 673.085719] RIP: 0010:ksmbd_conn_write+0x68/0xc0 [ksmbd] [ 673.085808] RAX: 0000000000000000 RBX: ffff88811ade4f00 RCX: 0000000000000000 [ 673.085817] RDX: 0000000000000000 RSI: ffff88810c2a9780 RDI: ffff88810c2a9ac0 [ 673.085826] RBP: ffffc900005e3e00 R08: 0000000000000000 R09: 0000000000000000 [ 673.085834] R10: ffffffffa3168160 R11: 63203a64626d736b R12: ffff8881057c8800 [ 673.085842] R13: ffff8881057c8820 R14: ffff8882781b2380 R15: ffff8881057c8800 [ 673.085852] FS: 0000000000000000(0000) GS:ffff888278180000(0000) knlGS:0000000000000000 [ 673.085864] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 673.085872] CR2: 0000000000000000 CR3: 000000015b63c000 CR4: 0000000000350ee0 [ 673.085883] Call Trace: [ 673.085890] <TASK> [ 673.085900] ? show_regs+0x6a/0x80 [ 673.085916] ? __die+0x25/0x70 [ 673.085926] ? page_fault_oops+0x154/0x4b0 [ 673.085938] ? tick_nohz_tick_stopped+0x18/0x50 [ 673.085954] ? __irq_work_queue_local+0xba/0x140 [ 673.085967] ? do_user_addr_fault+0x30f/0x6c0 [ 673.085979] ? exc_page_fault+0x79/0x180 [ 673.085992] ? asm_exc_page_fault+0x27/0x30 [ 673.086009] ? ksmbd_conn_write+0x68/0xc0 [ksmbd] [ 673.086067] ? ksmbd_conn_write+0x46/0xc0 [ksmbd] [ 673.086123] handle_ksmbd_work+0x28d/0x4b0 [ksmbd] [ 673.086177] process_one_work+0x178/0x350 [ 673.086193] ? __pfx_worker_thread+0x10/0x10 [ 673.086202] worker_thread+0x2f3/0x420 [ 673.086210] ? _raw_spin_unlock_irqrestore+0x27/0x50 [ 673.086222] ? __pfx_worker_thread+0x10/0x10 [ 673.086230] kthread+0x103/0x140 [ 673.086242] ? __pfx_kthread+0x10/0x10 [ 673.086253] ret_from_fork+0x39/0x60 [ 673.086263] ? __pfx_kthread+0x10/0x10 [ 673.086274] ret_from_fork_asm+0x1b/0x30 Fixes: e2b76ab ("ksmbd: add support for read compound") Reported-by: Tom Talpey <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 skips transaction if object type provides no .update interface. Patch #2 skips NETDEV_CHANGENAME which is unused. Patch #3 enables conntrack to handle Multicast Router Advertisements and Multicast Router Solicitations from the Multicast Router Discovery protocol (RFC4286) as untracked opposed to invalid packets. From Linus Luessing. Patch #4 updates DCCP conntracker to mark invalid as invalid, instead of dropping them, from Jason Xing. Patch #5 uses NF_DROP instead of -NF_DROP since NF_DROP is 0, also from Jason. Patch #6 removes reference in netfilter's sysctl documentation on pickup entries which were already removed by Florian Westphal. Patch #7 removes check for IPS_OFFLOAD flag to disable early drop which allows to evict entries from the conntrack table, also from Florian. Patches #8 to #16 updates nf_tables pipapo set backend to allocate the datastructure copy on-demand from preparation phase, to better deal with OOM situations where .commit step is too late to fail. Series from Florian Westphal. Patch #17 adds a selftest with packetdrill to cover conntrack TCP state transitions, also from Florian. Patch #18 use GFP_KERNEL to clone elements from control plane to avoid quick atomic reserves exhaustion with large sets, reporter refers to million entries magnitude. * tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: allow clone callbacks to sleep selftests: netfilter: add packetdrill based conntrack tests netfilter: nft_set_pipapo: remove dirty flag netfilter: nft_set_pipapo: move cloning of match info to insert/removal path netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone netfilter: nft_set_pipapo: merge deactivate helper into caller netfilter: nft_set_pipapo: prepare walk function for on-demand clone netfilter: nft_set_pipapo: prepare destroy function for on-demand clone netfilter: nft_set_pipapo: make pipapo_clone helper return NULL netfilter: nft_set_pipapo: move prove_locking helper around netfilter: conntrack: remove flowtable early-drop test netfilter: conntrack: documentation: remove reference to non-existent sysctl netfilter: use NF_DROP instead of -NF_DROP netfilter: conntrack: dccp: try not to drop skb in conntrack netfilter: conntrack: fix ct-state for ICMPv6 Multicast Router Discovery netfilter: nf_tables: remove NETDEV_CHANGENAME from netdev chain event handler netfilter: nf_tables: skip transaction if update object is not implemented ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]>

When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Fixes: 0f3154e ("ionic: Add Tx and Rx handling") Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Brett Creeley <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] thesofproject#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] thesofproject#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 thesofproject#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 thesofproject#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 thesofproject#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c thesofproject#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b thesofproject#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 thesofproject#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 thesofproject#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f thesofproject#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>

During the migration of Soundwire runtime stream allocation from the Qualcomm Soundwire controller to SoC's soundcard drivers the sdm845 soundcard was forgotten. At this point any playback attempt or audio daemon startup, for instance on sdm845-db845c (Qualcomm RB3 board), will result in stream pointer NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101ecf000 [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: ... CPU: 5 UID: 0 PID: 1198 Comm: aplay Not tainted 6.12.0-rc2-qcomlt-arm64-00059-g9d78f315a362-dirty thesofproject#18 Hardware name: Thundercomm Dragonboard 845c (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] lr : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] sp : ffff80008a2035c0 x29: ffff80008a2035c0 x28: ffff80008a203978 x27: 0000000000000000 x26: 00000000000000c0 x25: 0000000000000000 x24: ffff1676025f4800 x23: ffff167600ff1cb8 x22: ffff167600ff1c98 x21: 0000000000000003 x20: ffff167607316000 x19: ffff167604e64e80 x18: 0000000000000000 x17: 0000000000000000 x16: ffffcec265074160 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff167600ff1cec x5 : ffffcec22cfa2010 x4 : 0000000000000000 x3 : 0000000000000003 x2 : ffff167613f836c0 x1 : 0000000000000000 x0 : ffff16761feb60b8 Call trace: sdw_stream_add_slave+0x44/0x380 [soundwire_bus] wsa881x_hw_params+0x68/0x80 [snd_soc_wsa881x] snd_soc_dai_hw_params+0x3c/0xa4 __soc_pcm_hw_params+0x230/0x660 dpcm_be_dai_hw_params+0x1d0/0x3f8 dpcm_fe_dai_hw_params+0x98/0x268 snd_pcm_hw_params+0x124/0x460 snd_pcm_common_ioctl+0x998/0x16e8 snd_pcm_ioctl+0x34/0x58 __arm64_sys_ioctl+0xac/0xf8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xe0 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: aa0403fb f9418400 9100e000 9400102f (f8420f22) ---[ end trace 0000000000000000 ]--- 0000000000006108 <sdw_stream_add_slave>: 6108: d503233f paciasp 610c: a9b97bfd stp x29, x30, [sp, #-112]! 6110: 910003fd mov x29, sp 6114: a90153f3 stp x19, x20, [sp, thesofproject#16] 6118: a9025bf5 stp x21, x22, [sp, thesofproject#32] 611c: aa0103f6 mov x22, x1 6120: 2a0303f5 mov w21, w3 6124: a90363f7 stp x23, x24, [sp, thesofproject#48] 6128: aa0003f8 mov x24, x0 612c: aa0203f7 mov x23, x2 6130: a9046bf9 stp x25, x26, [sp, thesofproject#64] 6134: aa0403f9 mov x25, x4 <-- x4 copied to x25 6138: a90573fb stp x27, x28, [sp, thesofproject#80] 613c: aa0403fb mov x27, x4 6140: f9418400 ldr x0, [x0, thesofproject#776] 6144: 9100e000 add x0, x0, #0x38 6148: 94000000 bl 0 <mutex_lock> 614c: f8420f22 ldr x2, [x25, thesofproject#32]! <-- offset 0x44 ^^^ This is 0x6108 + offset 0x44 from the beginning of sdw_stream_add_slave() where data abort happens. wsa881x_hw_params() is called with stream = NULL and passes it further in register x4 (5th argument) to sdw_stream_add_slave() without any checks. Value from x4 is copied to x25 and finally it aborts on trying to load a value from address in x25 plus offset 32 (in dec) which corresponds to master_list member in struct sdw_stream_runtime: struct sdw_stream_runtime { const char * name; /* 0 8 */ struct sdw_stream_params params; /* 8 12 */ enum sdw_stream_state state; /* 20 4 */ enum sdw_stream_type type; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ here-> struct list_head master_list; /* 32 16 */ int m_rt_count; /* 48 4 */ /* size: 56, cachelines: 1, members: 6 */ /* sum members: 48, holes: 1, sum holes: 4 */ /* padding: 4 */ /* last cacheline: 56 bytes */ Fix this by adding required calls to qcom_snd_sdw_startup() and sdw_release_stream() to startup and shutdown routines which restores the previous correct behaviour when ->set_stream() method is called to set a valid stream runtime pointer on playback startup. Reproduced and then fix was tested on db845c RB3 board. Reported-by: Dmitry Baryshkov <[email protected]> Cc: [email protected] Fixes: 15c7fab ("ASoC: qcom: Move Soundwire runtime stream alloc to soundcards") Cc: Srinivas Kandagatla <[email protected]> Cc: Dmitry Baryshkov <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Pierre-Louis Bossart <[email protected]> Signed-off-by: Alexey Klimov <[email protected]> Tested-by: Steev Klimaszewski <[email protected]> # Lenovo Yoga C630 Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>

plbossart and others added 13 commits July 2, 2018 14:02

Revert "ASoC: Intel: replace snd_soc_codec to snd_soc_component in cn…

5fb50cc

…l_rt274" This reverts commit 51f6db7.

Revert "ASoC: Intel: make cnl_rt274 work with SOF"

c35c0c8

This reverts commit 1ac86e1.

Revert "ASoC: Intel: add rt274 machine driver for cnl"

e3eb26f

This reverts commit 18ba099.

ASoC: Intel: cnl-rt274: fix compilation warning

b8751ca

Needs to be squashed with component model update, kept separate to avoid merge issues with SST code Signed-off-by: Pierre-Louis Bossart <[email protected]>

ASoC: Intel: cnl-rt274: fix clock settings

512bda5

Use 24MHz instead of 19.2 (Mandatory rework) and use helper to find the dai Signed-off-by: Pierre-Louis Bossart <[email protected]>

ASoC: Intel: make cnl_rt274 work with SOF

78803c0

(1)refine machine driver to make it work with sof (2)disable DMIC for it is not ready now Signed-off-by: Rander Wang <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]>

Asoc: Intel: refine rt274 machine driver for SOF

6192c7b

Add SOF platform name Signed-off-by: Rander Wang <[email protected]>

plbossart merged commit 6d34036 into thesofproject:topic/sof-dev Jul 2, 2018

tokyovigilante mentioned this pull request Nov 8, 2019

Lenovo patches #1442

Merged

aiChaoSONG pushed a commit to aiChaoSONG/linux that referenced this pull request May 6, 2021

Merge pull request thesofproject#16 from Rust-for-Linux/github-ci

c17d290

Add CI

ppfranco mentioned this pull request Aug 9, 2021

Speakers/headphones not working in Lenovo Yoga C640 (Comet Lake PCH cAVS, Realtek ALC285) #3087

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Topic/cnl rt274 alignment #16

Topic/cnl rt274 alignment #16

plbossart commented Jul 2, 2018

Topic/cnl rt274 alignment #16

Topic/cnl rt274 alignment #16

Conversation

plbossart commented Jul 2, 2018