feat(vpcgw): add initial support for v1

cmd/scw/testdata/test-all-usage-vpc-gw-dh-cpusage.golden

@@ -0,0 +1,24 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+DHCP configuration allows you to set parameters for assignment of IP addresses to devices on a Private Network attached to a VPC Public Gateway (subnet, lease time etc).
+
+USAGE:
+  scw vpc-gw dhcp <command>
+
+AVAILABLE COMMANDS:
+  create      Create a DHCP configuration
+  delete      Delete a DHCP configuration
+  get         Get a DHCP configuration
+  list        List DHCP configurations
+  update      Update a DHCP configuration
+
+FLAGS:
+  -h, --help   help for dhcp
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use
+
+Use "scw vpc-gw dhcp [command] --help" for more information about a command.

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-create-usage.golden

@@ -0,0 +1,35 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Create a DHCP configuration.
+
+USAGE:
+  scw vpc-gw dhcp create [arg=value ...]
+
+ARGS:
+  [project-id]                     Project ID to use. If none is passed the default project ID will be used
+  [subnet]                         Subnet for the DHCP server
+  [address]                        Address of the DHCP server. This will be the gateway's address in the private network. Defaults to the first address of the subnet
+  [pool-low]                       Low IP (included) of the dynamic address pool
+  [pool-high]                      High IP (included) of the dynamic address pool
+  [enable-dynamic]                 Whether to enable dynamic pooling of IPs
+  [valid-lifetime.seconds]         
+  [valid-lifetime.nanos]           
+  [renew-timer.seconds]            
+  [renew-timer.nanos]              
+  [rebind-timer.seconds]           
+  [rebind-timer.nanos]             
+  [push-default-route]             Whether the gateway should push a default route to DHCP clients or only hand out IPs. Defaults to true
+  [push-dns-server]                Whether the gateway should push custom DNS servers to clients
+  [dns-servers-override.{index}]   Override the DNS server list pushed to DHCP clients, instead of the gateway itself
+  [dns-search.{index}]             Additional DNS search paths
+  [dns-local-name]                 TLD given to hosts in the Private Network
+  [zone=fr-par-1]                  Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for create
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-delete-usage.golden

@@ -0,0 +1,19 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Delete a DHCP configuration.
+
+USAGE:
+  scw vpc-gw dhcp delete <dhcpid ...> [arg=value ...]
+
+ARGS:
+  dhcpid            DHCP config id to delete
+  [zone=fr-par-1]   Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for delete
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-entry-create-usage.golden

@@ -0,0 +1,21 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Create a static DHCP reservation.
+
+USAGE:
+  scw vpc-gw dhcp-entry create [arg=value ...]
+
+ARGS:
+  [gateway-network-id]   GatewayNetwork on which to create a DHCP reservation
+  [mac-address]          MAC address to give a static entry to
+  [ip-address]           IP address to give to the machine
+  [zone=fr-par-1]        Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for create
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-entry-delete-usage.golden

@@ -0,0 +1,19 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Delete a DHCP reservation.
+
+USAGE:
+  scw vpc-gw dhcp-entry delete <dhcp-entry-id ...> [arg=value ...]
+
+ARGS:
+  dhcp-entry-id     DHCP entry ID to delete
+  [zone=fr-par-1]   Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for delete
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-entry-get-usage.golden

@@ -0,0 +1,19 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Get DHCP entries.
+
+USAGE:
+  scw vpc-gw dhcp-entry get <dhcp-entry-id ...> [arg=value ...]
+
+ARGS:
+  dhcp-entry-id     ID of the DHCP entry to fetch
+  [zone=fr-par-1]   Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for get
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-entry-list-usage.golden

@@ -0,0 +1,24 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+List DHCP entries.
+
+USAGE:
+  scw vpc-gw dhcp-entry list [arg=value ...]
+
+ARGS:
+  [order-by]             Order in which to return results (created_at_asc | created_at_desc | ip_address_asc | ip_address_desc | hostname_asc | hostname_desc)
+  [gateway-network-id]   Filter entries based on the gateway network they are on
+  [mac-address]          Filter entries on their MAC address
+  [ip-address]           Filter entries on their IP address
+  [hostname]             Filter entries on their hostname substring
+  [type]                 Filter entries on their type (unknown | reservation | lease)
+  [zone=fr-par-1]        Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for list
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-entry-set-usage.golden

@@ -0,0 +1,21 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Set the list of DHCP reservations attached to a Gateway Network. Reservations are identified by their MAC address, and will sync the current DHCP entry list to the given list, creating, updating or deleting DHCP entries.
+
+USAGE:
+  scw vpc-gw dhcp-entry set [arg=value ...]
+
+ARGS:
+  [gateway-network-id]                 Gateway Network on which to set DHCP reservation list
+  [dhcp-entries.{index}.mac-address]   MAC address to give a static entry to
+  [dhcp-entries.{index}.ip-address]    IP address to give to the machine
+  [zone=fr-par-1]                      Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for set
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-entry-update-usage.golden

@@ -0,0 +1,20 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Update a DHCP entry.
+
+USAGE:
+  scw vpc-gw dhcp-entry update <dhcp-entry-id ...> [arg=value ...]
+
+ARGS:
+  dhcp-entry-id     DHCP entry ID to update
+  [ip-address]      New IP address to give to the machine
+  [zone=fr-par-1]   Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for update
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-entry-usage.golden

@@ -0,0 +1,25 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+DHCP entries hold both dynamic DHCP leases (IP addresses dynamically assigned by the gateway to instances) and static user-created DHCP reservations.
+
+USAGE:
+  scw vpc-gw dhcp-entry <command>
+
+AVAILABLE COMMANDS:
+  create      Create a static DHCP reservation
+  delete      Delete a DHCP reservation
+  get         Get DHCP entries
+  list        List DHCP entries
+  set         Set all DHCP reservations on a Gateway Network
+  update      Update a DHCP entry
+
+FLAGS:
+  -h, --help   help for dhcp-entry
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use
+
+Use "scw vpc-gw dhcp-entry [command] --help" for more information about a command.

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-get-usage.golden

@@ -0,0 +1,19 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Get a DHCP configuration.
+
+USAGE:
+  scw vpc-gw dhcp get <dhcpid ...> [arg=value ...]
+
+ARGS:
+  dhcpid            ID of the DHCP config to fetch
+  [zone=fr-par-1]   Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for get
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-list-usage.golden

@@ -0,0 +1,23 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+List DHCP configurations.
+
+USAGE:
+  scw vpc-gw dhcp list [arg=value ...]
+
+ARGS:
+  [order-by]          Order in which to return results (created_at_asc | created_at_desc | subnet_asc | subnet_desc)
+  [project-id]        Include only DHCPs in this project
+  [address]           Filter on gateway address
+  [has-address]       Filter on subnets containing address
+  [organization-id]   Include only DHCPs in this organization
+  [zone=fr-par-1]     Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for list
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-dhcp-update-usage.golden

@@ -0,0 +1,35 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Update a DHCP configuration.
+
+USAGE:
+  scw vpc-gw dhcp update <dhcpid ...> [arg=value ...]
+
+ARGS:
+  dhcpid                           DHCP config to update
+  [subnet]                         Subnet for the DHCP server
+  [address]                        Address of the DHCP server. This will be the gateway's address in the private network
+  [pool-low]                       Low IP (included) of the dynamic address pool
+  [pool-high]                      High IP (included) of the dynamic address pool
+  [enable-dynamic]                 Whether to enable dynamic pooling of IPs
+  [valid-lifetime.seconds]         
+  [valid-lifetime.nanos]           
+  [renew-timer.seconds]            
+  [renew-timer.nanos]              
+  [rebind-timer.seconds]           
+  [rebind-timer.nanos]             
+  [push-default-route]             Whether the gateway should push a default route to DHCP clients or only hand out IPs
+  [push-dns-server]                Whether the gateway should push custom DNS servers to clients
+  [dns-servers-override.{index}]   Override the DNS server list pushed to DHCP clients, instead of the gateway itself
+  [dns-search.{index}]             Additional DNS search paths
+  [dns-local-name]                 TLD given to hosts in the Private Network
+  [zone=fr-par-1]                  Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for update
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-gateway-create-usage.golden

@@ -0,0 +1,24 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Create a VPC Public Gateway.
+
+USAGE:
+  scw vpc-gw gateway create [arg=value ...]
+
+ARGS:
+  [project-id]                     Project ID to use. If none is passed the default project ID will be used
+  [name=<generated>]               Name of the gateway
+  [tags.{index}]                   Tags for the gateway
+  [type=VPC-GW-S]                  Gateway type
+  [upstream-dns-servers.{index}]   Override the gateway's default recursive DNS servers, if DNS features are enabled
+  [ip-id]                          Attach an existing IP to the gateway
+  [zone=fr-par-1]                  Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for create
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-gateway-delete-usage.golden

@@ -0,0 +1,20 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Delete a VPC Public Gateway.
+
+USAGE:
+  scw vpc-gw gateway delete <gateway-id ...> [arg=value ...]
+
+ARGS:
+  gateway-id        ID of the gateway to delete
+  [cleanup-dhcp]    Whether to cleanup attached DHCP configurations
+  [zone=fr-par-1]   Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for delete
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use

cmd/scw/testdata/test-all-usage-vpc-gw-gateway-get-usage.golden

@@ -0,0 +1,19 @@
+🎲🎲🎲 EXIT CODE: 0 🎲🎲🎲
+🟥🟥🟥 STDERR️️ 🟥🟥🟥️
+Get a VPC Public Gateway.
+
+USAGE:
+  scw vpc-gw gateway get <gateway-id ...> [arg=value ...]
+
+ARGS:
+  gateway-id        ID of the gateway to fetch
+  [zone=fr-par-1]   Zone to target. If none is passed will use default zone from the config (fr-par-1 | fr-par-2 | nl-ams-1 | pl-waw-1)
+
+FLAGS:
+  -h, --help   help for get
+
+GLOBAL FLAGS:
+  -c, --config string    The path to the config file
+  -D, --debug            Enable debug mode
+  -o, --output string    Output format: json or human, see 'scw help output' for more info (default "human")
+  -p, --profile string   The config profile to use