RK3328 Kernel v4.4 #42
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
The RK3328 has two video IP sharing the same mmu, but only the VDPU is available in this platform. Change-Id: I24d73cd5ab2c3d32da6ef29661061c7fda9186f2 Signed-off-by: Randy Li <[email protected]>
This commit would enable the VDPU and RKVDEC devices. The VDPU works in the non combo mode. Change-Id: I643350d5a2ac17759984fda2e95fb2b82701e7cf Signed-off-by: Randy Li <[email protected]> Signed-off-by: Hans Yang <[email protected]> Conflicts: arch/arm64/boot/dts/rockchip/rk3328-evb.dts
Change-Id: Idf5691c7b0c7da75579be410c2fb5e1a346ab012
Change-Id: I4d0b01491f4183c7e700fdb8ba7025871a162951
This reverts commit 1f58bcd.
This reverts commit bf512ba.
Change-Id: I02e7ab0bed3166cf98483f35b3f4da6113baacd6
Add helper to allow users to retrieve the speaker allocations without knowledge of the ELD structure. Signed-off-by: Arnaud Pouliquen <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Signed-off-by: Mark Brown <[email protected]>
During probe, DAIs can need to perform some actions that requests the knowledge of the pcm runtime handle. The callback is called during DAIs linking, after PCM device creation. For instance this can be used to add relationship between a DAI pcm control and the pcm device. Signed-off-by: Arnaud Pouliquen <[email protected]> Signed-off-by: Mark Brown <[email protected]>
Add user interface to provide channel mapping. In a first step this control is read only. As TLV type, the control provides all configuration available for HDMI sink(ELD), and provides current channel mapping selected by codec based on ELD and number of channels specified by user on open. When control is called before the number of the channel is specified (i.e. hw_params is set), it returns all channels set to UNKNOWN. Signed-off-by: Arnaud Pouliquen <[email protected]> Signed-off-by: Mark Brown <[email protected]>
DRM legacy doesn't allow that, will be only available with drm atomic. Although, when running 4K modes, it's preferable to get a 1080p frambuffer that can be handlded properly by GPU and then use VOP to upscale that to 4K.
Revert "Squashfs: optimize reading uncompressed data" This reverts commit 0c2f831. Revert "Squashfs: implement .readpages()" This reverts commit 9c6d9ab. Revert "Squashfs: replace buffer_head with BIO" This reverts commit 8327714. Revert "Squashfs: refactor page_actor" This reverts commit 4bc7d97. Revert "Squashfs: remove the FILE_CACHE option" This reverts commit 3de0af4.
The kernel headers package (linux-headers) doesn't include header files from other architectures required to build out-of-tree modules. For e.g. on ARM64, opcodes.h includes the same file from ARM which causes the following error: ./arch/arm64/include/asm/opcodes.h:1:43: fatal error: ../../arm/include/asm/opcodes.h: No such file or directory compilation terminated. Signed-off-by: Azriel Samson <[email protected]>
Change-Id: I27a9d962f778e39323e8ff70177379360f589de7
CONFIG_KEYS_COMPAT is defined in arch-specific Kconfigs and is missing for several 64-bit architectures : mips, parisc, tile. At the moment and for those architectures, calling in 32-bit userspace the keyctl syscall would return an ENOSYS error. This patch moves the CONFIG_KEYS_COMPAT option to security/keys/Kconfig, to make sure the compatibility wrapper is registered by default for any 64-bit architecture as long as it is configured with CONFIG_COMPAT. [DH: Modified to remove arm64 compat enablement also as requested by Eric Biggers] Signed-off-by: Bilal Amarni <[email protected]> Signed-off-by: David Howells <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> cc: Eric Biggers <[email protected]> Signed-off-by: James Morris <[email protected]>
…act-cert Change-Id: I5a1df1068dc4a77b84b9a6e3107eb5f73930b0c0
Some special SoCs (e.g. rk322xh) USB3 PHY have problem to detect disconnection, they lose the ability to detect an absence of Rx termination specified in USB3 spec Table 6-21, fortunately, the USB3 PHY can detect port link state change when USB3 device is unplugged, so we can do soft disconnect according to the PLC. Change-Id: I2cbd62fddc8a1f9c5a264d705db43fb0cf3e035c Signed-off-by: William Wu <[email protected]> Signed-off-by: Frank Wang <[email protected]>
According to xHCI spec v1.1 section 6.4.5 TRB Completion Codes, the standard XHCI controller provide a TRB Completion Status 'USB Transaction Error' to asserted in the case where the host did not receive a valid response from the device, it's useful to handle pending URBs on the endpoint when the USB device is plugged out. Unfortunately, some SOCs USB 3.0 modules lose the ability to assert the 'USB Transaction Error' status when USB 3.0 device disconnect. This may cause the pending URBs unhandled, even lead to USB class driver stalled in waiting for URBs complete. This patch flush pending URBs in usb_disable_device() when USB 3.0 device disconnect, it will call xhci_urb_dequeue() -> xhci_queue_stop_endpoint() to cancel pending URBs and giveback URB status immediately. Change-Id: If8acac59bc1f2c10a41ee390ccbeb84b2e7743c1 Signed-off-by: Feng Mingli <[email protected]> Signed-off-by: Frank Wang <[email protected]>
We found the usb-phy lost devices detected ability after continuously disconnect/connect, this patch add usb2-phy reset/deassert as one part of previous workaround (commit c1ebf31) to fix it. Change-Id: Ib7112047eb0f5030406389aa9c8ebd599f8118be Signed-off-by: Frank Wang <[email protected]>
|
Please do not include commits from me, they are old or may no longer be relevant, I will send PRs with my changes once the code is finished. |
|
low quality |
rkchrome
pushed a commit
that referenced
this pull request
Dec 4, 2017
1.Rename some functions to fix multiple definition compile error. 2.Build optee_linuxdriver when TEE_SUPPORT is enabled. 3.Rename "optee" obj name to "optee_v1" to fix module name conflict error: [ 0.211629] sysfs: cannot create duplicate filename '/module/optee/version' [ 0.211670] ------------[ cut here ]------------ [ 0.211684] WARNING: at fs/sysfs/dir.c:31 [ 0.211697] Modules linked in: [ 0.211713] [ 0.211726] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 4.4.93 #42 [ 0.211738] Hardware name: Rockchip RK3399 Excavator Board edp (Android) (DT) [ 0.211752] task: ffffffc0f2160000 task.stack: ffffffc0f2168000 [ 0.211772] PC is at sysfs_warn_dup+0x60/0x7c [ 0.211785] LR is at sysfs_warn_dup+0x60/0x7c Change-Id: I9cc98307a32d9b186f7aac86027da231b486c487 Signed-off-by: Zhang Zhijie <[email protected]>
wzyy2
pushed a commit
that referenced
this pull request
Jan 30, 2018
…abled When begin connecting to PC in device mode, the driver will hold a wake lock to prevent system from entering deep sleep. If it fails to connect to PC or doesn't detect the vbus, the driver will suspend usb phy and disable usb clk, and release the wake lock. If unlock the wake lock first, system may enter deep sleep before suspend usb phy and disable usb clk. Then wake up system by pull out the usb cable, it may cause usb interrupt abnormal. TEST=rk3126c connect the usb charger into the charging interface, after the system entered deep sleep, pull out the usb cable with the following log: irq 42: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 146 Comm: charger Not tainted 3.10.104 #133 [<c0014088>] unwind_backtrace+0x0/0xe0 [<c00118cc>] show_stack+0x10/0x14 [<c00b0be0>] __report_bad_irq+0x28/0xb8 [<c00b0e68>] note_interrupt+0x138/0x1cc [<c00aef88>] handle_irq_event_percpu+0x2c0/0x2f4 [<c00aeff8>] handle_irq_event+0x3c/0x5c [<c00b1a20>] handle_fasteoi_irq+0xbc/0x124 [<c00ae764>] generic_handle_irq+0x20/0x30 [<c000e4cc>] handle_IRQ+0x64/0x8c [<c000853c>] gic_handle_irq+0x38/0x5c handlers: [<c042b3ec>] dwc_otg_common_irq [<c0438704>] dwc_otg_pcd_irq [<c03fab48>] usb_hcd_irq Disabling IRQ #42 Change-Id: Ic099992faa55302e293b1dacf588866abcd1a9be Signed-off-by: Feng Mingli <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Dec 15, 2018
Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 rockchip-linux#38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 rockchip-linux#39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 rockchip-linux#40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 rockchip-linux#41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 rockchip-linux#42 [9a06e518] 88 bytes do_writepages at 73fe6a rockchip-linux#43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 rockchip-linux#44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 rockchip-linux#45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 rockchip-linux#46 [9a06ec98] 928 bytes wb_writeback at a2500e rockchip-linux#47 [9a06f038] 848 bytes wb_do_writeback at a260ae rockchip-linux#48 [9a06f388] 536 bytes wb_workfn at a28228 rockchip-linux#49 [9a06f5a0] 1088 bytes process_one_work at 24a234 rockchip-linux#50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 rockchip-linux#51 [9a06fe40] 104 bytes kthread at 26545a rockchip-linux#52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Dec 15, 2018
Driver doesn't release rtnl lock if registration with L2 driver (bnxt_re_register_netdev) fais and this causes hang while requesting for the next lock. [ 371.635416] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 371.635417] kworker/u48:1 D 0 634 2 0x80000000 [ 371.635423] Workqueue: bnxt_re bnxt_re_task [bnxt_re] [ 371.635424] Call Trace: [ 371.635426] ? __schedule+0x36b/0xbd0 [ 371.635429] schedule+0x39/0x90 [ 371.635430] schedule_preempt_disabled+0x11/0x20 [ 371.635431] __mutex_lock+0x45b/0x9c0 [ 371.635433] ? __mutex_lock+0x16d/0x9c0 [ 371.635435] ? bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re] [ 371.635438] ? wake_up_klogd+0x37/0x40 [ 371.635442] bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re] [ 371.635447] bnxt_re_task+0xfd/0x180 [bnxt_re] [ 371.635449] process_one_work+0x216/0x5b0 [ 371.635450] ? process_one_work+0x189/0x5b0 [ 371.635453] worker_thread+0x4e/0x3d0 [ 371.635455] kthread+0x10e/0x140 [ 371.635456] ? process_one_work+0x5b0/0x5b0 [ 371.635458] ? kthread_stop+0x220/0x220 [ 371.635460] ret_from_fork+0x3a/0x50 [ 371.635477] INFO: task NetworkManager:1228 blocked for more than 120 seconds. [ 371.635478] Tainted: G B OE 4.20.0-rc1+ rockchip-linux#42 [ 371.635479] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Release the rtnl_lock correctly in the failure path. Fixes: de5c95d ("RDMA/bnxt_re: Fix system crash during RDMA resource initialization") Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Dec 15, 2018
When bnxt_re_ib_reg returns failure, the device structure gets freed. Driver tries to access the device pointer after it is freed. [ 4871.034744] Failed to register with netedev: 0xffffffa1 [ 4871.034765] infiniband (null): Failed to register with IB: 0xffffffea [ 4871.046430] ================================================================== [ 4871.046437] BUG: KASAN: use-after-free in bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046439] Write of size 4 at addr ffff880fa8406f48 by task kworker/u48:2/17813 [ 4871.046443] CPU: 20 PID: 17813 Comm: kworker/u48:2 Kdump: loaded Tainted: G B OE 4.20.0-rc1+ rockchip-linux#42 [ 4871.046444] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 4871.046447] Workqueue: bnxt_re bnxt_re_task [bnxt_re] [ 4871.046449] Call Trace: [ 4871.046454] dump_stack+0x91/0xeb [ 4871.046458] print_address_description+0x6a/0x2a0 [ 4871.046461] kasan_report+0x176/0x2d0 [ 4871.046463] ? bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046466] bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046470] process_one_work+0x216/0x5b0 [ 4871.046471] ? process_one_work+0x189/0x5b0 [ 4871.046475] worker_thread+0x4e/0x3d0 [ 4871.046479] kthread+0x10e/0x140 [ 4871.046480] ? process_one_work+0x5b0/0x5b0 [ 4871.046482] ? kthread_stop+0x220/0x220 [ 4871.046486] ret_from_fork+0x3a/0x50 [ 4871.046492] The buggy address belongs to the page: [ 4871.046494] page:ffffea003ea10180 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 4871.046495] flags: 0x57ffffc0000000() [ 4871.046498] raw: 0057ffffc0000000 0000000000000000 ffffea003ea10188 0000000000000000 [ 4871.046500] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 4871.046501] page dumped because: kasan: bad access detected Avoid accessing the device structure once it is freed. Fixes: 497158a ("RDMA/bnxt_re: Fix the ib_reg failure cleanup") Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Dec 15, 2018
We see the following lockdep warning: [ 2284.078521] ====================================================== [ 2284.078604] WARNING: possible circular locking dependency detected [ 2284.078604] 4.19.0+ rockchip-linux#42 Tainted: G E [ 2284.078604] ------------------------------------------------------ [ 2284.078604] rmmod/254 is trying to acquire lock: [ 2284.078604] 00000000acd94e28 ((&n->timer)#2){+.-.}, at: del_timer_sync+0x5/0xa0 [ 2284.078604] [ 2284.078604] but task is already holding lock: [ 2284.078604] 00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x190 [tipc] [ 2284.078604] [ 2284.078604] which lock already depends on the new lock. [ 2284.078604] [ 2284.078604] [ 2284.078604] the existing dependency chain (in reverse order) is: [ 2284.078604] [ 2284.078604] -> #1 (&(&tn->node_list_lock)->rlock){+.-.}: [ 2284.078604] tipc_node_timeout+0x20a/0x330 [tipc] [ 2284.078604] call_timer_fn+0xa1/0x280 [ 2284.078604] run_timer_softirq+0x1f2/0x4d0 [ 2284.078604] __do_softirq+0xfc/0x413 [ 2284.078604] irq_exit+0xb5/0xc0 [ 2284.078604] smp_apic_timer_interrupt+0xac/0x210 [ 2284.078604] apic_timer_interrupt+0xf/0x20 [ 2284.078604] default_idle+0x1c/0x140 [ 2284.078604] do_idle+0x1bc/0x280 [ 2284.078604] cpu_startup_entry+0x19/0x20 [ 2284.078604] start_secondary+0x187/0x1c0 [ 2284.078604] secondary_startup_64+0xa4/0xb0 [ 2284.078604] [ 2284.078604] -> #0 ((&n->timer)#2){+.-.}: [ 2284.078604] del_timer_sync+0x34/0xa0 [ 2284.078604] tipc_node_delete+0x1a/0x40 [tipc] [ 2284.078604] tipc_node_stop+0xcb/0x190 [tipc] [ 2284.078604] tipc_net_stop+0x154/0x170 [tipc] [ 2284.078604] tipc_exit_net+0x16/0x30 [tipc] [ 2284.078604] ops_exit_list.isra.8+0x36/0x70 [ 2284.078604] unregister_pernet_operations+0x87/0xd0 [ 2284.078604] unregister_pernet_subsys+0x1d/0x30 [ 2284.078604] tipc_exit+0x11/0x6f2 [tipc] [ 2284.078604] __x64_sys_delete_module+0x1df/0x240 [ 2284.078604] do_syscall_64+0x66/0x460 [ 2284.078604] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 2284.078604] [ 2284.078604] other info that might help us debug this: [ 2284.078604] [ 2284.078604] Possible unsafe locking scenario: [ 2284.078604] [ 2284.078604] CPU0 CPU1 [ 2284.078604] ---- ---- [ 2284.078604] lock(&(&tn->node_list_lock)->rlock); [ 2284.078604] lock((&n->timer)#2); [ 2284.078604] lock(&(&tn->node_list_lock)->rlock); [ 2284.078604] lock((&n->timer)#2); [ 2284.078604] [ 2284.078604] *** DEADLOCK *** [ 2284.078604] [ 2284.078604] 3 locks held by rmmod/254: [ 2284.078604] #0: 000000003368be9b (pernet_ops_rwsem){+.+.}, at: unregister_pernet_subsys+0x15/0x30 [ 2284.078604] #1: 0000000046ed9c86 (rtnl_mutex){+.+.}, at: tipc_net_stop+0x144/0x170 [tipc] [ 2284.078604] #2: 00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x19 [...} The reason is that the node timer handler sometimes needs to delete a node which has been disconnected for too long. To do this, it grabs the lock 'node_list_lock', which may at the same time be held by the generic node cleanup function, tipc_node_stop(), during module removal. Since the latter is calling del_timer_sync() inside the same lock, we have a potential deadlock. We fix this letting the timer cleanup function use spin_trylock() instead of just spin_lock(), and when it fails to grab the lock it just returns so that the timer handler can terminate its execution. This is safe to do, since tipc_node_stop() anyway is about to delete both the timer and the node instance. Fixes: 6a939f3 ("tipc: Auto removal of peer down node instance") Acked-by: Ying Xue <[email protected]> Signed-off-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Jul 1, 2019
[ Upstream commit b7d5dc2 ] The per-CPU variable batched_entropy_uXX is protected by get_cpu_var(). This is just a preempt_disable() which ensures that the variable is only from the local CPU. It does not protect against users on the same CPU from another context. It is possible that a preemptible context reads slot 0 and then an interrupt occurs and the same value is read again. The above scenario is confirmed by lockdep if we add a spinlock: | ================================ | WARNING: inconsistent lock state | 5.1.0-rc3+ rockchip-linux#42 Not tainted | -------------------------------- | inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. | ksoftirqd/9/56 [HC0[0]:SC1[1]:HE0:SE0] takes: | (____ptrval____) (batched_entropy_u32.lock){+.?.}, at: get_random_u32+0x3e/0xe0 | {SOFTIRQ-ON-W} state was registered at: | _raw_spin_lock+0x2a/0x40 | get_random_u32+0x3e/0xe0 | new_slab+0x15c/0x7b0 | ___slab_alloc+0x492/0x620 | __slab_alloc.isra.73+0x53/0xa0 | kmem_cache_alloc_node+0xaf/0x2a0 | copy_process.part.41+0x1e1/0x2370 | _do_fork+0xdb/0x6d0 | kernel_thread+0x20/0x30 | kthreadd+0x1ba/0x220 | ret_from_fork+0x3a/0x50 … | other info that might help us debug this: | Possible unsafe locking scenario: | | CPU0 | ---- | lock(batched_entropy_u32.lock); | <Interrupt> | lock(batched_entropy_u32.lock); | | *** DEADLOCK *** | | stack backtrace: | Call Trace: … | kmem_cache_alloc_trace+0x20e/0x270 | ipmi_alloc_recv_msg+0x16/0x40 … | __do_softirq+0xec/0x48d | run_ksoftirqd+0x37/0x60 | smpboot_thread_fn+0x191/0x290 | kthread+0xfe/0x130 | ret_from_fork+0x3a/0x50 Add a spinlock_t to the batched_entropy data structure and acquire the lock while accessing it. Acquire the lock with disabled interrupts because this function may be used from interrupt context. Remove the batched_entropy_reset_lock lock. Now that we have a lock for the data scructure, we can access it from a remote CPU. Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Jul 1, 2019
[ Upstream commit 981fbe3 ] Ref: https://bugzilla.kernel.org/show_bug.cgi?id=199323 Users are experiencing problems with the DVBSky S960/S960C USB devices since the following commit: 9d659ae: ("locking/mutex: Add lock handoff to avoid starvation") The device malfunctions after running for an indeterminable period of time, and the problem can only be cleared by rebooting the machine. It is possible to encourage the problem to surface by blocking the signal to the LNB. Further debugging revealed the cause of the problem. In the following capture: - thread #1325 is running m88ds3103_set_frontend - thread rockchip-linux#42 is running ts2020_stat_work a> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 80 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 08 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 68 3f [42] usb 1-1: dvb_usb_v2_generic_io: <<< 08 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 3d [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff b> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 00 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 21 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 66 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 60 02 10 0b [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 Two i2c messages are sent to perform a reset in m88ds3103_set_frontend: a. 0x07, 0x80 b. 0x07, 0x00 However, as shown in the capture, the regmap mutex is being handed over to another thread (ts2020_stat_work) in between these two messages. >From here, the device responds to every i2c message with an 07 message, and will only return to normal operation following a power cycle. Use regmap_multi_reg_write to group the two reset messages, ensuring both are processed before the regmap mutex is unlocked. Signed-off-by: James Hutchinson <[email protected]> Reviewed-by: Antti Palosaari <[email protected]> Signed-off-by: Sean Young <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Jul 1, 2019
commit 1b28d55 upstream. Commit 3309bec ("KVM: PPC: Book3S HV: Fix lockdep warning when entering the guest") moved calls to trace_hardirqs_{on,off} in the entry path used for HPT guests. Similar code exists in the new streamlined entry path used for radix guests on POWER9. This makes the same change there, so as to avoid lockdep warnings such as this: [ 228.686461] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 228.686480] WARNING: CPU: 116 PID: 3803 at ../kernel/locking/lockdep.c:4219 check_flags.part.23+0x21c/0x270 [ 228.686544] Modules linked in: vhost_net vhost xt_CHECKSUM iptable_mangle xt_MASQUERADE iptable_nat nf_nat +xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter +ebtables ip6table_filter ip6_tables iptable_filter fuse kvm_hv kvm at24 ipmi_powernv regmap_i2c ipmi_devintf +uio_pdrv_genirq ofpart ipmi_msghandler uio powernv_flash mtd ibmpowernv opal_prd ip_tables ext4 mbcache jbd2 btrfs +zstd_decompress zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor +raid6_pq raid1 raid0 ses sd_mod enclosure scsi_transport_sas ast i2c_opal i2c_algo_bit drm_kms_helper syscopyarea +sysfillrect sysimgblt fb_sys_fops ttm drm i40e e1000e cxl aacraid tg3 drm_panel_orientation_quirks i2c_core [ 228.686859] CPU: 116 PID: 3803 Comm: qemu-system-ppc Kdump: loaded Not tainted 5.2.0-rc1-xive+ rockchip-linux#42 [ 228.686911] NIP: c0000000001b394c LR: c0000000001b3948 CTR: c000000000bfad20 [ 228.686963] REGS: c000200cdb50f570 TRAP: 0700 Not tainted (5.2.0-rc1-xive+) [ 228.687001] MSR: 9000000002823033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 48222222 XER: 20040000 [ 228.687060] CFAR: c000000000116db0 IRQMASK: 1 [ 228.687060] GPR00: c0000000001b3948 c000200cdb50f800 c0000000015e7600 000000000000002e [ 228.687060] GPR04: 0000000000000001 c0000000001c71a0 000000006e655f73 72727563284e4f5f [ 228.687060] GPR08: 0000200e60680000 0000000000000000 c000200cdb486180 0000000000000000 [ 228.687060] GPR12: 0000000000002000 c000200fff61a680 0000000000000000 00007fffb75c0000 [ 228.687060] GPR16: 0000000000000000 0000000000000000 c0000000017d6900 c000000001124900 [ 228.687060] GPR20: 0000000000000074 c008000006916f68 0000000000000074 0000000000000074 [ 228.687060] GPR24: ffffffffffffffff ffffffffffffffff 0000000000000003 c000200d4b600000 [ 228.687060] GPR28: c000000001627e58 c000000001489908 c000000001627e58 c000000002304de0 [ 228.687377] NIP [c0000000001b394c] check_flags.part.23+0x21c/0x270 [ 228.687415] LR [c0000000001b3948] check_flags.part.23+0x218/0x270 [ 228.687466] Call Trace: [ 228.687488] [c000200cdb50f800] [c0000000001b3948] check_flags.part.23+0x218/0x270 (unreliable) [ 228.687542] [c000200cdb50f870] [c0000000001b6548] lock_is_held_type+0x188/0x1c0 [ 228.687595] [c000200cdb50f8d0] [c0000000001d939c] rcu_read_lock_sched_held+0xdc/0x100 [ 228.687646] [c000200cdb50f900] [c0000000001dd704] rcu_note_context_switch+0x304/0x340 [ 228.687701] [c000200cdb50f940] [c0080000068fcc58] kvmhv_run_single_vcpu+0xdb0/0x1120 [kvm_hv] [ 228.687756] [c000200cdb50fa20] [c0080000068fd5b0] kvmppc_vcpu_run_hv+0x5e8/0xe40 [kvm_hv] [ 228.687816] [c000200cdb50faf0] [c0080000071797dc] kvmppc_vcpu_run+0x34/0x48 [kvm] [ 228.687863] [c000200cdb50fb10] [c0080000071755dc] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm] [ 228.687916] [c000200cdb50fba0] [c008000007165ccc] kvm_vcpu_ioctl+0x424/0x838 [kvm] [ 228.687957] [c000200cdb50fd10] [c000000000433a24] do_vfs_ioctl+0xd4/0xcd0 [ 228.687995] [c000200cdb50fdb0] [c000000000434724] ksys_ioctl+0x104/0x120 [ 228.688033] [c000200cdb50fe00] [c000000000434768] sys_ioctl+0x28/0x80 [ 228.688072] [c000200cdb50fe20] [c00000000000b888] system_call+0x5c/0x70 [ 228.688109] Instruction dump: [ 228.688142] 4bf6342d 60000000 0fe00000 e8010080 7c0803a6 4bfffe60 3c82ff87 3c62ff87 [ 228.688196] 388472d0 3863d738 4bf63405 60000000 <0fe00000> 4bffff4c 3c82ff87 3c62ff87 [ 228.688251] irq event stamp: 205 [ 228.688287] hardirqs last enabled at (205): [<c0080000068fc1b4>] kvmhv_run_single_vcpu+0x30c/0x1120 [kvm_hv] [ 228.688344] hardirqs last disabled at (204): [<c0080000068fbff0>] kvmhv_run_single_vcpu+0x148/0x1120 [kvm_hv] [ 228.688412] softirqs last enabled at (180): [<c000000000c0b2ac>] __do_softirq+0x4ac/0x5d4 [ 228.688464] softirqs last disabled at (169): [<c000000000122aa8>] irq_exit+0x1f8/0x210 [ 228.688513] ---[ end trace eb16f6260022a812 ]--- [ 228.688548] possible reason: unannotated irqs-off. [ 228.688571] irq event stamp: 205 [ 228.688607] hardirqs last enabled at (205): [<c0080000068fc1b4>] kvmhv_run_single_vcpu+0x30c/0x1120 [kvm_hv] [ 228.688664] hardirqs last disabled at (204): [<c0080000068fbff0>] kvmhv_run_single_vcpu+0x148/0x1120 [kvm_hv] [ 228.688719] softirqs last enabled at (180): [<c000000000c0b2ac>] __do_softirq+0x4ac/0x5d4 [ 228.688758] softirqs last disabled at (169): [<c000000000122aa8>] irq_exit+0x1f8/0x210 Cc: [email protected] # v4.20+ Fixes: 95a6432 ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Signed-off-by: Paul Mackerras <[email protected]> Reviewed-by: Cédric Le Goater <[email protected]> Tested-by: Cédric Le Goater <[email protected]> Signed-off-by: Paul Mackerras <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
rkchrome
pushed a commit
that referenced
this pull request
Jul 22, 2019
[ Upstream commit 981fbe3 ] Ref: https://bugzilla.kernel.org/show_bug.cgi?id=199323 Users are experiencing problems with the DVBSky S960/S960C USB devices since the following commit: 9d659ae: ("locking/mutex: Add lock handoff to avoid starvation") The device malfunctions after running for an indeterminable period of time, and the problem can only be cleared by rebooting the machine. It is possible to encourage the problem to surface by blocking the signal to the LNB. Further debugging revealed the cause of the problem. In the following capture: - thread #1325 is running m88ds3103_set_frontend - thread #42 is running ts2020_stat_work a> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 80 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 08 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 68 3f [42] usb 1-1: dvb_usb_v2_generic_io: <<< 08 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 3d [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff b> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 00 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 21 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 66 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 60 02 10 0b [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 Two i2c messages are sent to perform a reset in m88ds3103_set_frontend: a. 0x07, 0x80 b. 0x07, 0x00 However, as shown in the capture, the regmap mutex is being handed over to another thread (ts2020_stat_work) in between these two messages. >From here, the device responds to every i2c message with an 07 message, and will only return to normal operation following a power cycle. Use regmap_multi_reg_write to group the two reset messages, ensuring both are processed before the regmap mutex is unlocked. Signed-off-by: James Hutchinson <[email protected]> Reviewed-by: Antti Palosaari <[email protected]> Signed-off-by: Sean Young <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Aug 21, 2019
…ath device When the user issues a command with side effects, we will end up freezing the namespace request queue when updating disk info (and the same for the corresponding mpath disk node). However, we are not freezing the mpath node request queue, which means that mpath I/O can still come in and block on blk_queue_enter (called from nvme_ns_head_make_request -> direct_make_request). This is a deadlock, because blk_queue_enter will block until the inner namespace request queue is unfroze, but that process is blocked because the namespace revalidation is trying to update the mpath disk info and freeze its request queue (which will never complete because of the I/O that is blocked on blk_queue_enter). Fix this by freezing all the subsystem nsheads request queues before executing the passthru command. Given that these commands are infrequent we should not worry about this temporary I/O freeze to keep things sane. Here is the matching hang traces: -- [ 374.465002] INFO: task systemd-udevd:17994 blocked for more than 122 seconds. [ 374.472975] Not tainted 5.2.0-rc3-mpdebug+ rockchip-linux#42 [ 374.478522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.487274] systemd-udevd D 0 17994 1 0x00000000 [ 374.493407] Call Trace: [ 374.496145] __schedule+0x2ef/0x620 [ 374.500047] schedule+0x38/0xa0 [ 374.503569] blk_queue_enter+0x139/0x220 [ 374.507959] ? remove_wait_queue+0x60/0x60 [ 374.512540] direct_make_request+0x60/0x130 [ 374.517219] nvme_ns_head_make_request+0x11d/0x420 [nvme_core] [ 374.523740] ? generic_make_request_checks+0x307/0x6f0 [ 374.529484] generic_make_request+0x10d/0x2e0 [ 374.534356] submit_bio+0x75/0x140 [ 374.538163] ? guard_bio_eod+0x32/0xe0 [ 374.542361] submit_bh_wbc+0x171/0x1b0 [ 374.546553] block_read_full_page+0x1ed/0x330 [ 374.551426] ? check_disk_change+0x70/0x70 [ 374.556008] ? scan_shadow_nodes+0x30/0x30 [ 374.560588] blkdev_readpage+0x18/0x20 [ 374.564783] do_read_cache_page+0x301/0x860 [ 374.569463] ? blkdev_writepages+0x10/0x10 [ 374.574037] ? prep_new_page+0x88/0x130 [ 374.578329] ? get_page_from_freelist+0xa2f/0x1280 [ 374.583688] ? __alloc_pages_nodemask+0x179/0x320 [ 374.588947] read_cache_page+0x12/0x20 [ 374.593142] read_dev_sector+0x2d/0xd0 [ 374.597337] read_lba+0x104/0x1f0 [ 374.601046] find_valid_gpt+0xfa/0x720 [ 374.605243] ? string_nocheck+0x58/0x70 [ 374.609534] ? find_valid_gpt+0x720/0x720 [ 374.614016] efi_partition+0x89/0x430 [ 374.618113] ? string+0x48/0x60 [ 374.621632] ? snprintf+0x49/0x70 [ 374.625339] ? find_valid_gpt+0x720/0x720 [ 374.629828] check_partition+0x116/0x210 [ 374.634214] rescan_partitions+0xb6/0x360 [ 374.638699] __blkdev_reread_part+0x64/0x70 [ 374.643377] blkdev_reread_part+0x23/0x40 [ 374.647860] blkdev_ioctl+0x48c/0x990 [ 374.651956] block_ioctl+0x41/0x50 [ 374.655766] do_vfs_ioctl+0xa7/0x600 [ 374.659766] ? locks_lock_inode_wait+0xb1/0x150 [ 374.664832] ksys_ioctl+0x67/0x90 [ 374.668539] __x64_sys_ioctl+0x1a/0x20 [ 374.672732] do_syscall_64+0x5a/0x1c0 [ 374.676828] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 374.738474] INFO: task nvmeadm:49141 blocked for more than 123 seconds. [ 374.745871] Not tainted 5.2.0-rc3-mpdebug+ rockchip-linux#42 [ 374.751419] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.760170] nvmeadm D 0 49141 36333 0x00004080 [ 374.766301] Call Trace: [ 374.769038] __schedule+0x2ef/0x620 [ 374.772939] schedule+0x38/0xa0 [ 374.776452] blk_mq_freeze_queue_wait+0x59/0x100 [ 374.781614] ? remove_wait_queue+0x60/0x60 [ 374.786192] blk_mq_freeze_queue+0x1a/0x20 [ 374.790773] nvme_update_disk_info.isra.57+0x5f/0x350 [nvme_core] [ 374.797582] ? nvme_identify_ns.isra.50+0x71/0xc0 [nvme_core] [ 374.804006] __nvme_revalidate_disk+0xe5/0x110 [nvme_core] [ 374.810139] nvme_revalidate_disk+0xa6/0x120 [nvme_core] [ 374.816078] ? nvme_submit_user_cmd+0x11e/0x320 [nvme_core] [ 374.822299] nvme_user_cmd+0x264/0x370 [nvme_core] [ 374.827661] nvme_dev_ioctl+0x112/0x1d0 [nvme_core] [ 374.833114] do_vfs_ioctl+0xa7/0x600 [ 374.837117] ? __audit_syscall_entry+0xdd/0x130 [ 374.842184] ksys_ioctl+0x67/0x90 [ 374.845891] __x64_sys_ioctl+0x1a/0x20 [ 374.850082] do_syscall_64+0x5a/0x1c0 [ 374.854178] entry_SYSCALL_64_after_hwframe+0x44/0xa9 -- Reported-by: James Puthukattukaran <[email protected]> Tested-by: James Puthukattukaran <[email protected]> Reviewed-by: Keith Busch <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Aug 21, 2019
WARNING: Prefer 'unsigned int' to bare use of 'unsigned' rockchip-linux#42: FILE: fs/ocfs2/aops.c:2155: + unsigned i_blkbits = inode->i_sb->s_blocksize_bits; ERROR: code indent should use tabs where possible rockchip-linux#53: FILE: fs/ocfs2/aops.c:2166: + ^I * "pos" and "end", we need map twice to return different buffer state:$ WARNING: please, no space before tabs rockchip-linux#53: FILE: fs/ocfs2/aops.c:2166: + ^I * "pos" and "end", we need map twice to return different buffer state:$ ERROR: code indent should use tabs where possible rockchip-linux#54: FILE: fs/ocfs2/aops.c:2167: + ^I * 1. area in file size, not set NEW;$ WARNING: please, no space before tabs rockchip-linux#54: FILE: fs/ocfs2/aops.c:2167: + ^I * 1. area in file size, not set NEW;$ ERROR: code indent should use tabs where possible rockchip-linux#55: FILE: fs/ocfs2/aops.c:2168: + ^I * 2. area out file size, set NEW.$ WARNING: please, no space before tabs rockchip-linux#55: FILE: fs/ocfs2/aops.c:2168: + ^I * 2. area out file size, set NEW.$ ERROR: code indent should use tabs where possible rockchip-linux#56: FILE: fs/ocfs2/aops.c:2169: + ^I *$ WARNING: please, no space before tabs rockchip-linux#56: FILE: fs/ocfs2/aops.c:2169: + ^I *$ ERROR: code indent should use tabs where possible rockchip-linux#57: FILE: fs/ocfs2/aops.c:2170: + ^I *^I^I iblock endblk$ WARNING: please, no space before tabs rockchip-linux#57: FILE: fs/ocfs2/aops.c:2170: + ^I *^I^I iblock endblk$ ERROR: code indent should use tabs where possible rockchip-linux#58: FILE: fs/ocfs2/aops.c:2171: + ^I * |--------|---------|---------|---------$ WARNING: please, no space before tabs rockchip-linux#58: FILE: fs/ocfs2/aops.c:2171: + ^I * |--------|---------|---------|---------$ ERROR: code indent should use tabs where possible rockchip-linux#59: FILE: fs/ocfs2/aops.c:2172: + ^I * |<-------area in file------->|$ WARNING: please, no space before tabs rockchip-linux#59: FILE: fs/ocfs2/aops.c:2172: + ^I * |<-------area in file------->|$ ERROR: code indent should use tabs where possible rockchip-linux#60: FILE: fs/ocfs2/aops.c:2173: + ^I */$ WARNING: please, no space before tabs rockchip-linux#60: FILE: fs/ocfs2/aops.c:2173: + ^I */$ total: 8 errors, 9 warnings, 40 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/ocfs2-clear-zero-in-unaligned-direct-io.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Jia Guo <[email protected]> Cc: Yiwen Jiang <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Aug 29, 2019
WARNING: Prefer 'unsigned int' to bare use of 'unsigned' rockchip-linux#42: FILE: fs/ocfs2/aops.c:2155: + unsigned i_blkbits = inode->i_sb->s_blocksize_bits; ERROR: code indent should use tabs where possible rockchip-linux#53: FILE: fs/ocfs2/aops.c:2166: + ^I * "pos" and "end", we need map twice to return different buffer state:$ WARNING: please, no space before tabs rockchip-linux#53: FILE: fs/ocfs2/aops.c:2166: + ^I * "pos" and "end", we need map twice to return different buffer state:$ ERROR: code indent should use tabs where possible rockchip-linux#54: FILE: fs/ocfs2/aops.c:2167: + ^I * 1. area in file size, not set NEW;$ WARNING: please, no space before tabs rockchip-linux#54: FILE: fs/ocfs2/aops.c:2167: + ^I * 1. area in file size, not set NEW;$ ERROR: code indent should use tabs where possible rockchip-linux#55: FILE: fs/ocfs2/aops.c:2168: + ^I * 2. area out file size, set NEW.$ WARNING: please, no space before tabs rockchip-linux#55: FILE: fs/ocfs2/aops.c:2168: + ^I * 2. area out file size, set NEW.$ ERROR: code indent should use tabs where possible rockchip-linux#56: FILE: fs/ocfs2/aops.c:2169: + ^I *$ WARNING: please, no space before tabs rockchip-linux#56: FILE: fs/ocfs2/aops.c:2169: + ^I *$ ERROR: code indent should use tabs where possible rockchip-linux#57: FILE: fs/ocfs2/aops.c:2170: + ^I *^I^I iblock endblk$ WARNING: please, no space before tabs rockchip-linux#57: FILE: fs/ocfs2/aops.c:2170: + ^I *^I^I iblock endblk$ ERROR: code indent should use tabs where possible rockchip-linux#58: FILE: fs/ocfs2/aops.c:2171: + ^I * |--------|---------|---------|---------$ WARNING: please, no space before tabs rockchip-linux#58: FILE: fs/ocfs2/aops.c:2171: + ^I * |--------|---------|---------|---------$ ERROR: code indent should use tabs where possible rockchip-linux#59: FILE: fs/ocfs2/aops.c:2172: + ^I * |<-------area in file------->|$ WARNING: please, no space before tabs rockchip-linux#59: FILE: fs/ocfs2/aops.c:2172: + ^I * |<-------area in file------->|$ ERROR: code indent should use tabs where possible rockchip-linux#60: FILE: fs/ocfs2/aops.c:2173: + ^I */$ WARNING: please, no space before tabs rockchip-linux#60: FILE: fs/ocfs2/aops.c:2173: + ^I */$ total: 8 errors, 9 warnings, 40 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/ocfs2-clear-zero-in-unaligned-direct-io.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Jia Guo <[email protected]> Cc: Yiwen Jiang <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]>
0lvin
pushed a commit
to free-z4u/roc-rk3328-cc-official
that referenced
this pull request
Sep 21, 2019
The IRQ is requested before the struct rtc is allocated and registered, but this struct is used in the IRQ handler, leading to: Unable to handle kernel NULL pointer dereference at virtual address 0000017c pgd = a38a2f9b [0000017c] *pgd=00000000 Internal error: Oops: 5 [FireflyTeam#1] ARM Modules linked in: CPU: 0 PID: 613 Comm: irq/48-m41t80 Not tainted 4.16.0-rc1+ rockchip-linux#42 Hardware name: Atmel SAMA5 PC is at mutex_lock+0x14/0x38 LR is at m41t80_handle_irq+0x1c/0x9c pc : [<c06e864c>] lr : [<c04b70f0>] psr: 20000013 sp : dec73f30 ip : 00000000 fp : dec56d98 r10: df437cf0 r9 : c0a03008 r8 : c0145ffc r7 : df5c4300 r6 : dec568d0 r5 : df593000 r4 : 0000017c r3 : df592800 r2 : 60000013 r1 : df593000 r0 : 0000017c Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 20004059 DAC: 00000051 Process irq/48-m41t80 (pid: 613, stack limit = 0xb52d091e) Stack: (0xdec73f30 to 0xdec74000) 3f20: dec56840 df5c4300 00000001 df5c4300 3f40: c0145ffc c0146018 dec56840 ffffe000 00000001 c0146290 dec567c0 00000000 3f60: c0146084 ed7c9a62 c014615c dec56d80 dec567c0 00000000 dec72000 dec56840 3f80: c014615c c012ffc0 dec72000 dec567c0 c012fe80 00000000 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 29282726 2d2c2b2a [<c06e864c>] (mutex_lock) from [<c04b70f0>] (m41t80_handle_irq+0x1c/0x9c) [<c04b70f0>] (m41t80_handle_irq) from [<c0146018>] (irq_thread_fn+0x1c/0x54) [<c0146018>] (irq_thread_fn) from [<c0146290>] (irq_thread+0x134/0x1c0) [<c0146290>] (irq_thread) from [<c012ffc0>] (kthread+0x140/0x148) [<c012ffc0>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xdec73fb0 to 0xdec73ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3c33d7f e3c3303f f5d0f000 e593300c (e1901f9f) ---[ end trace 22b027302eb7c604 ]--- genirq: exiting task "irq/48-m41t80" (613) is an active IRQ thread (irq 48) Also, there is another possible race condition. The probe function is not allowed to fail after the RTC is registered because the following may happen: CPU0: CPU1: sys_load_module() do_init_module() do_one_initcall() cmos_do_probe() rtc_device_register() __register_chrdev() cdev->owner = struct module* open("/dev/rtc0") rtc_device_unregister() module_put() free_module() module_free(mod->module_core) /* struct module *module is now freed */ chrdev_open() spin_lock(cdev_lock) cdev_get() try_module_get() module_is_live() /* dereferences already freed struct module* */ Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc before requesting the IRQ and register it as late as possible. Signed-off-by: Alexandre Belloni <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Sep 28, 2019
Thomas has noticed the following NULL ptr dereference when using cgroup v1 kmem limit: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 16923 Comm: gtk-update-icon Not tainted 4.19.51 rockchip-linux#42 Hardware name: Gigabyte Technology Co., Ltd. Z97X-Gaming G1/Z97X-Gaming G1, BIOS F9 07/31/2015 RIP: 0010:create_empty_buffers+0x24/0x100 Code: cd 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 d4 ba 01 00 00 00 55 53 48 89 fb e8 97 fe ff ff 48 89 c5 48 89 c2 eb 03 48 89 ca <48> 8b 4a 08 4c 09 22 48 85 c9 75 f1 48 89 6a 08 48 8b 43 18 48 8d RSP: 0018:ffff927ac1b37bf8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: fffff2d4429fd740 RCX: 0000000100097149 RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff9075a99fbe00 RBP: 0000000000000000 R08: fffff2d440949cc8 R09: 00000000000960c0 R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000 R13: ffff907601f18360 R14: 0000000000002000 R15: 0000000000001000 FS: 00007fb55b288bc0(0000) GS:ffff90761f8c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000007aebc002 CR4: 00000000001606e0 Call Trace: create_page_buffers+0x4d/0x60 __block_write_begin_int+0x8e/0x5a0 ? ext4_inode_attach_jinode.part.82+0xb0/0xb0 ? jbd2__journal_start+0xd7/0x1f0 ext4_da_write_begin+0x112/0x3d0 generic_perform_write+0xf1/0x1b0 ? file_update_time+0x70/0x140 __generic_file_write_iter+0x141/0x1a0 ext4_file_write_iter+0xef/0x3b0 __vfs_write+0x17e/0x1e0 vfs_write+0xa5/0x1a0 ksys_write+0x57/0xd0 do_syscall_64+0x55/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Tetsuo then noticed that this is because the __memcg_kmem_charge_memcg fails __GFP_NOFAIL charge when the kmem limit is reached. This is a wrong behavior because nofail allocations are not allowed to fail. Normal charge path simply forces the charge even if that means to cross the limit. Kmem accounting should be doing the same. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Michal Hocko <[email protected]> Reported-by: Thomas Lindroth <[email protected]> Debugged-by: Tetsuo Handa <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Vladimir Davydov <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Thomas Lindroth <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Mark Brown <[email protected]>
Kwiboo
pushed a commit
to Kwiboo/linux-rockchip
that referenced
this pull request
Sep 28, 2019
WARNING: Prefer 'unsigned int' to bare use of 'unsigned' rockchip-linux#42: FILE: fs/ocfs2/aops.c:2155: + unsigned i_blkbits = inode->i_sb->s_blocksize_bits; ERROR: code indent should use tabs where possible rockchip-linux#53: FILE: fs/ocfs2/aops.c:2166: + ^I * "pos" and "end", we need map twice to return different buffer state:$ WARNING: please, no space before tabs rockchip-linux#53: FILE: fs/ocfs2/aops.c:2166: + ^I * "pos" and "end", we need map twice to return different buffer state:$ ERROR: code indent should use tabs where possible rockchip-linux#54: FILE: fs/ocfs2/aops.c:2167: + ^I * 1. area in file size, not set NEW;$ WARNING: please, no space before tabs rockchip-linux#54: FILE: fs/ocfs2/aops.c:2167: + ^I * 1. area in file size, not set NEW;$ ERROR: code indent should use tabs where possible rockchip-linux#55: FILE: fs/ocfs2/aops.c:2168: + ^I * 2. area out file size, set NEW.$ WARNING: please, no space before tabs rockchip-linux#55: FILE: fs/ocfs2/aops.c:2168: + ^I * 2. area out file size, set NEW.$ ERROR: code indent should use tabs where possible rockchip-linux#56: FILE: fs/ocfs2/aops.c:2169: + ^I *$ WARNING: please, no space before tabs rockchip-linux#56: FILE: fs/ocfs2/aops.c:2169: + ^I *$ ERROR: code indent should use tabs where possible rockchip-linux#57: FILE: fs/ocfs2/aops.c:2170: + ^I *^I^I iblock endblk$ WARNING: please, no space before tabs rockchip-linux#57: FILE: fs/ocfs2/aops.c:2170: + ^I *^I^I iblock endblk$ ERROR: code indent should use tabs where possible rockchip-linux#58: FILE: fs/ocfs2/aops.c:2171: + ^I * |--------|---------|---------|---------$ WARNING: please, no space before tabs rockchip-linux#58: FILE: fs/ocfs2/aops.c:2171: + ^I * |--------|---------|---------|---------$ ERROR: code indent should use tabs where possible rockchip-linux#59: FILE: fs/ocfs2/aops.c:2172: + ^I * |<-------area in file------->|$ WARNING: please, no space before tabs rockchip-linux#59: FILE: fs/ocfs2/aops.c:2172: + ^I * |<-------area in file------->|$ ERROR: code indent should use tabs where possible rockchip-linux#60: FILE: fs/ocfs2/aops.c:2173: + ^I */$ WARNING: please, no space before tabs rockchip-linux#60: FILE: fs/ocfs2/aops.c:2173: + ^I */$ total: 8 errors, 9 warnings, 40 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/ocfs2-clear-zero-in-unaligned-direct-io.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Jia Guo <[email protected]> Cc: Yiwen Jiang <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Mark Brown <[email protected]>
0lvin
pushed a commit
to free-z4u/roc-rk3328-cc-official
that referenced
this pull request
Sep 28, 2019
In arm64's kasan_init(), we use pfn_to_nid() to find the NUMA node a span of memory is in, hoping to allocate shadow from the same NUMA node. However, at this point, the page array has not been initialized, and thus this is bogus. Since commit: f165b37 ("mm: uninitialized struct page poisoning sanity") ... accessing fields of the page array results in a boot time Oops(), highlighting this problem: [ 0.000000] Unable to handle kernel paging request at virtual address dfff200000000000 [ 0.000000] Mem abort info: [ 0.000000] ESR = 0x96000004 [ 0.000000] Exception class = DABT (current EL), IL = 32 bits [ 0.000000] SET = 0, FnV = 0 [ 0.000000] EA = 0, S1PTW = 0 [ 0.000000] Data abort info: [ 0.000000] ISV = 0, ISS = 0x00000004 [ 0.000000] CM = 0, WnR = 0 [ 0.000000] [dfff200000000000] address between user and kernel address ranges [ 0.000000] Internal error: Oops: 96000004 [FireflyTeam#1] PREEMPT SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.16.0-07317-gf165b378bbdf rockchip-linux#42 [ 0.000000] Hardware name: ARM Juno development board (r1) (DT) [ 0.000000] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 0.000000] pc : __asan_load8+0x8c/0xa8 [ 0.000000] lr : __dump_page+0x3c/0x3b8 [ 0.000000] sp : ffff2000099b7ca0 [ 0.000000] x29: ffff2000099b7ca0 x28: ffff20000a1762c0 [ 0.000000] x27: ffff7e0000000000 x26: ffff2000099dd000 [ 0.000000] x25: ffff200009a3f960 x24: ffff200008f9c38c [ 0.000000] x23: ffff20000a9d3000 x22: ffff200009735430 [ 0.000000] x21: fffffffffffffffe x20: ffff7e0001e50420 [ 0.000000] x19: ffff7e0001e50400 x18: 0000000000001840 [ 0.000000] x17: ffffffffffff8270 x16: 0000000000001840 [ 0.000000] x15: 0000000000001920 x14: 0000000000000004 [ 0.000000] x13: 0000000000000000 x12: 0000000000000800 [ 0.000000] x11: 1ffff0012d0f89ff x10: ffff10012d0f89ff [ 0.000000] x9 : 0000000000000000 x8 : ffff8009687c5000 [ 0.000000] x7 : 0000000000000000 x6 : ffff10000f282000 [ 0.000000] x5 : 0000000000000040 x4 : fffffffffffffffe [ 0.000000] x3 : 0000000000000000 x2 : dfff200000000000 [ 0.000000] x1 : 0000000000000005 x0 : 0000000000000000 [ 0.000000] Process swapper (pid: 0, stack limit = 0x (ptrval)) [ 0.000000] Call trace: [ 0.000000] __asan_load8+0x8c/0xa8 [ 0.000000] __dump_page+0x3c/0x3b8 [ 0.000000] dump_page+0xc/0x18 [ 0.000000] kasan_init+0x2e8/0x5a8 [ 0.000000] setup_arch+0x294/0x71c [ 0.000000] start_kernel+0xdc/0x500 [ 0.000000] Code: aa0403e0 9400063c 17ffffee d343fc00 (38e26800) [ 0.000000] ---[ end trace 67064f0e9c0cc338 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- Let's fix this by using early_pfn_to_nid(), as other architectures do in their kasan init code. Note that early_pfn_to_nid acquires the nid from the memblock array, which we iterate over in kasan_init(), so this should be fine. Signed-off-by: Mark Rutland <[email protected]> Fixes: 39d114d ("arm64: add KASAN support") Cc: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
SquallATF
pushed a commit
to SquallATF/kernel
that referenced
this pull request
May 31, 2022
commit e55d9d9 upstream. Thomas has noticed the following NULL ptr dereference when using cgroup v1 kmem limit: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 0 P4D 0 Oops: 0000 [FireflyTeam#1] PREEMPT SMP PTI CPU: 3 PID: 16923 Comm: gtk-update-icon Not tainted 4.19.51 rockchip-linux#42 Hardware name: Gigabyte Technology Co., Ltd. Z97X-Gaming G1/Z97X-Gaming G1, BIOS F9 07/31/2015 RIP: 0010:create_empty_buffers+0x24/0x100 Code: cd 0f 1f 44 00 00 0f 1f 44 00 00 41 54 49 89 d4 ba 01 00 00 00 55 53 48 89 fb e8 97 fe ff ff 48 89 c5 48 89 c2 eb 03 48 89 ca <48> 8b 4a 08 4c 09 22 48 85 c9 75 f1 48 89 6a 08 48 8b 43 18 48 8d RSP: 0018:ffff927ac1b37bf8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: fffff2d4429fd740 RCX: 0000000100097149 RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff9075a99fbe00 RBP: 0000000000000000 R08: fffff2d440949cc8 R09: 00000000000960c0 R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000 R13: ffff907601f18360 R14: 0000000000002000 R15: 0000000000001000 FS: 00007fb55b288bc0(0000) GS:ffff90761f8c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000007aebc002 CR4: 00000000001606e0 Call Trace: create_page_buffers+0x4d/0x60 __block_write_begin_int+0x8e/0x5a0 ? ext4_inode_attach_jinode.part.82+0xb0/0xb0 ? jbd2__journal_start+0xd7/0x1f0 ext4_da_write_begin+0x112/0x3d0 generic_perform_write+0xf1/0x1b0 ? file_update_time+0x70/0x140 __generic_file_write_iter+0x141/0x1a0 ext4_file_write_iter+0xef/0x3b0 __vfs_write+0x17e/0x1e0 vfs_write+0xa5/0x1a0 ksys_write+0x57/0xd0 do_syscall_64+0x55/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Tetsuo then noticed that this is because the __memcg_kmem_charge_memcg fails __GFP_NOFAIL charge when the kmem limit is reached. This is a wrong behavior because nofail allocations are not allowed to fail. Normal charge path simply forces the charge even if that means to cross the limit. Kmem accounting should be doing the same. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Michal Hocko <[email protected]> Reported-by: Thomas Lindroth <[email protected]> Debugged-by: Tetsuo Handa <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Vladimir Davydov <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Thomas Lindroth <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
friendlyarm
pushed a commit
to friendlyarm/kernel-rockchip
that referenced
this pull request
Aug 23, 2022
commit 59c026c upstream. When use 'echo c > /proc/sysrq-trigger' to trigger kdump, riscv_crash_save_regs() will be called to save regs for vmcore, we found "epc" value 00ffffffa5537400 is not a valid kernel virtual address, but is a user virtual address. Other regs(eg, ra, sp, gp...) are correct kernel virtual address. Actually 0x00ffffffb0dd9400 is the user mode PC of 'PID: 113 Comm: sh', which is saved in the task's stack. [ 21.201701] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 rockchip-linux#45 [ 21.201979] Hardware name: riscv-virtio,qemu (DT) [ 21.202160] epc : 00ffffffa5537400 ra : ffffffff80088640 sp : ff20000010333b90 [ 21.202435] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be7c [ 21.202707] t1 : 0720072007200720 t2 : 30203a7375746174 s0 : ff20000010333cf0 [ 21.202973] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 21.203243] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 28c8f0aeffea4e00 [ 21.203519] a5 : 28c8f0aeffea4e00 a6 : 0000000000000009 a7 : ffffffff8035c9b8 [ 21.203794] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 21.204062] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 21.204331] s8 : 00ffffffef451410 s9 : 0000000000000007 s10: 00aaaaaac0510700 [ 21.204606] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 21.204876] t5 : ff60000001218000 t6 : ff200000103338b8 [ 21.205079] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the incorrect PC, the backtrace showed by crash tool as below, the first stack frame is abnormal, crash> bt PID: 113 TASK: ff60000002269600 CPU: 0 COMMAND: "sh" #0 [ff2000001039bb90] __efistub_.Ldebug_info0 at 00ffffffa5537400 <-- Abnormal #1 [ff2000001039bcf0] panic at ffffffff806578ba #2 [ff2000001039bd50] sysrq_reset_seq_param_set at ffffffff8038c030 #3 [ff2000001039bda0] __handle_sysrq at ffffffff8038c5f8 #4 [ff2000001039be00] write_sysrq_trigger at ffffffff8038cad8 #5 [ff2000001039be20] proc_reg_write at ffffffff801b7edc #6 [ff2000001039be40] vfs_write at ffffffff80152ba6 #7 [ff2000001039be80] ksys_write at ffffffff80152ece #8 [ff2000001039bed0] sys_write at ffffffff80152f46 With the patch, we can get current kernel mode PC, the output as below, [ 17.607658] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 rockchip-linux#42 [ 17.607937] Hardware name: riscv-virtio,qemu (DT) [ 17.608150] epc : ffffffff800078f8 ra : ffffffff8008862c sp : ff20000010333b90 [ 17.608441] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be68 [ 17.608741] t1 : 0720072007200720 t2 : 666666666666663c s0 : ff20000010333cf0 [ 17.609025] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 17.609320] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 0000000000000000 [ 17.609601] a5 : ff60000001c78000 a6 : 000000000000003c a7 : ffffffff8035c9a4 [ 17.609894] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 17.610186] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 17.610469] s8 : 00ffffffca281410 s9 : 0000000000000007 s10: 00aaaaaab5bb6700 [ 17.610755] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 17.611041] t5 : ff60000001218000 t6 : ff20000010333988 [ 17.611255] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the correct PC, the backtrace showed by crash tool as below, crash> bt PID: 113 TASK: ff6000000226c200 CPU: 0 COMMAND: "sh" #0 [ff20000010333b90] riscv_crash_save_regs at ffffffff800078f8 <--- Normal #1 [ff20000010333cf0] panic at ffffffff806578c6 #2 [ff20000010333d50] sysrq_reset_seq_param_set at ffffffff8038c03c #3 [ff20000010333da0] __handle_sysrq at ffffffff8038c604 #4 [ff20000010333e00] write_sysrq_trigger at ffffffff8038cae4 #5 [ff20000010333e20] proc_reg_write at ffffffff801b7ee8 #6 [ff20000010333e40] vfs_write at ffffffff80152bb2 #7 [ff20000010333e80] ksys_write at ffffffff80152eda #8 [ff20000010333ed0] sys_write at ffffffff80152f52 Fixes: e53d281 ("RISC-V: Add kdump support") Co-developed-by: Guo Ren <[email protected]> Signed-off-by: Xianting Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Thanks Ayufan