riscv: dts: th1520, lpi4a: add sdhci and rtl8723ds nodes #1

chainsx · 2023-10-11T16:31:51Z

添加设备树节点后：

板载 8723ds 可用
SD 卡槽仍无法使用

In powerpc pseries system, below behaviour is observed while enabling tracing on hcall: # cd /sys/kernel/debug/tracing/ # cat events/powerpc/hcall_exit/enable 0 # echo 1 > events/powerpc/hcall_exit/enable # ls -bash: fork: Bad address Above is from power9 lpar with latest kernel. Past this, softlockup is observed. Initially while attempting via perf_event_open to use "PERF_TYPE_TRACEPOINT", kernel panic was observed. perf config used: ================ memset(&pe[1],0,sizeof(struct perf_event_attr)); pe[1].type=PERF_TYPE_TRACEPOINT; pe[1].size=96; pe[1].config=0x26ULL; /* 38 raw_syscalls/sys_exit */ pe[1].sample_type=0; /* 0 */ pe[1].read_format=PERF_FORMAT_TOTAL_TIME_ENABLED|PERF_FORMAT_TOTAL_TIME_RUNNING|PERF_FORMAT_ID|PERF_FORMAT_GROUP|0x10ULL; /* 1f */ pe[1].inherit=1; pe[1].precise_ip=0; /* arbitrary skid */ pe[1].wakeup_events=0; pe[1].bp_type=HW_BREAKPOINT_EMPTY; pe[1].config1=0x1ULL; Kernel panic logs: ================== Kernel attempted to read user page (8) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000008 Faulting instruction address: 0xc0000000004c2814 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: nfnetlink bonding tls rfkill sunrpc dm_service_time dm_multipath pseries_rng xts vmx_crypto xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ibmvfc scsi_transport_fc ibmveth dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 0 PID: 1431 Comm: login Not tainted 6.4.0+ #1 Hardware name: IBM,8375-42A POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.30 (VL950_892) hv:phyp pSeries NIP page_remove_rmap+0x44/0x320 LR wp_page_copy+0x384/0xec0 Call Trace: 0xc00000001416e400 (unreliable) wp_page_copy+0x384/0xec0 __handle_mm_fault+0x9d4/0xfb0 handle_mm_fault+0xf0/0x350 ___do_page_fault+0x48c/0xc90 hash__do_page_fault+0x30/0x70 do_hash_fault+0x1a4/0x330 data_access_common_virt+0x198/0x1f0 --- interrupt: 300 at 0x7fffae971abc git bisect tracked this down to below commit: 'commit baa49d8 ("powerpc/pseries: hvcall stack frame overhead")' This commit changed STACK_FRAME_OVERHEAD (112 ) to STACK_FRAME_MIN_SIZE (32 ) since 32 bytes is the minimum size for ELFv2 stack. With the latest kernel, when running on ELFv2, STACK_FRAME_MIN_SIZE is used to allocate stack size. During plpar_hcall_trace, first call is made to HCALL_INST_PRECALL which saves the registers and allocates new stack frame. In the plpar_hcall_trace code, STK_PARAM is accessed at two places. 1. To save r4: std r4,STK_PARAM(R4)(r1) 2. To access r4 back: ld r12,STK_PARAM(R4)(r1) HCALL_INST_PRECALL precall allocates a new stack frame. So all the stack parameter access after the precall, needs to be accessed with +STACK_FRAME_MIN_SIZE. So the store instruction should be: std r4,STACK_FRAME_MIN_SIZE+STK_PARAM(R4)(r1) If the "std" is not updated with STACK_FRAME_MIN_SIZE, we will end up with overwriting stack contents and cause corruption. But instead of updating 'std', we can instead remove it since HCALL_INST_PRECALL already saves it to the correct location. similarly load instruction should be: ld r12,STACK_FRAME_MIN_SIZE+STK_PARAM(R4)(r1) Fix the load instruction to correctly access the stack parameter with +STACK_FRAME_MIN_SIZE and remove the store of r4 since the precall saves it correctly. Cc: [email protected] # v6.2+ Fixes: baa49d8 ("powerpc/pseries: hvcall stack frame overhead") Co-developed-by: Naveen N Rao <[email protected]> Signed-off-by: Naveen N Rao <[email protected]> Signed-off-by: Athira Rajeev <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]

Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup. Signed-off-by: Ricardo Cañuelo <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

For ARM processor, unaligned access to device memory is not allowed. Method memcpy does not take care of alignment. USB detection failure with the unalingned address of memory, with below kernel crash. To fix the unalingned address kernel panic, replace memcpy with memcpy_toio method. Kernel crash: Unable to handle kernel paging request at virtual address ffff80000c05008a Mem abort info: ESR = 0x96000061 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000061 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000143b000 [ffff80000c05008a] pgd=100000087ffff003, p4d=100000087ffff003, pud=100000087fffe003, pmd=1000000800bcc003, pte=00680000a0010713 Internal error: Oops: 96000061 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.19-xilinx-v2022.1 #1 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x30/0x260 lr : __xudc_ep0_queue+0xf0/0x110 sp : ffff800008003d00 x29: ffff800008003d00 x28: ffff800009474e80 x27: 00000000000000a0 x26: 0000000000000100 x25: 0000000000000012 x24: ffff000800bc8080 x23: 0000000000000001 x22: 0000000000000012 x21: ffff000800bc8080 x20: 0000000000000012 x19: ffff000800bc8080 x18: 0000000000000000 x17: ffff800876482000 x16: ffff800008004000 x15: 0000000000004000 x14: 00001f09785d0400 x13: 0103020101005567 x12: 0781400000000200 x11: 00000000c5672a10 x10: 00000000000008d0 x9 : ffff800009463cf0 x8 : ffff8000094757b0 x7 : 0201010055670781 x6 : 4000000002000112 x5 : ffff80000c05009a x4 : ffff000800a15012 x3 : ffff00080362ad80 x2 : 0000000000000012 x1 : ffff000800a15000 x0 : ffff80000c050088 Call trace: __memcpy+0x30/0x260 xudc_ep0_queue+0x3c/0x60 usb_ep_queue+0x38/0x44 composite_ep0_queue.constprop.0+0x2c/0xc0 composite_setup+0x8d0/0x185c configfs_composite_setup+0x74/0xb0 xudc_irq+0x570/0xa40 __handle_irq_event_percpu+0x58/0x170 handle_irq_event+0x60/0x120 handle_fasteoi_irq+0xc0/0x220 handle_domain_irq+0x60/0x90 gic_handle_irq+0x74/0xa0 call_on_irq_stack+0x2c/0x60 do_interrupt_handler+0x54/0x60 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x78/0x7c arch_cpu_idle+0x18/0x2c do_idle+0xdc/0x15c cpu_startup_entry+0x28/0x60 rest_init+0xc8/0xe0 arch_call_rest_init+0x10/0x1c start_kernel+0x694/0x6d4 __primary_switched+0xa4/0xac Fixes: 1f7c516 ("usb: gadget: Add xilinx usb2 device support") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Cc: [email protected] Signed-off-by: Piyush Mehta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

Surfaces can be backed (i.e. stored in) memory objects (mob's) which are created and managed by the userspace as GEM buffers. Surfaces grab only a ttm reference which means that the gem object can be deleted underneath us, especially in cases where prime buffer export is used. Make sure that all userspace surfaces which are backed by gem objects hold a gem reference to make sure they're not deleted before vmw surfaces are done with them, which fixes: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 2632 at lib/refcount.c:28 refcount_warn_saturate+0xfb/0x150 Modules linked in: overlay vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vsock snd_ens1371 snd_ac97_codec ac97_bus snd_pcm gameport> CPU: 2 PID: 2632 Comm: vmw_ref_count Not tainted 6.5.0-rc2-vmwgfx #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 RIP: 0010:refcount_warn_saturate+0xfb/0x150 Code: eb 9e 0f b6 1d 8b 5b a6 01 80 fb 01 0f 87 ba e4 80 00 83 e3 01 75 89 48 c7 c7 c0 3c f9 a3 c6 05 6f 5b a6 01 01 e8 15 81 98 ff <0f> 0b e9 6f ff ff ff 0f b> RSP: 0018:ffffbdc34344bba0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027 RDX: ffff960475ea1548 RSI: 0000000000000001 RDI: ffff960475ea1540 RBP: ffffbdc34344bba8 R08: 0000000000000003 R09: 65646e75203a745f R10: ffffffffa5b32b20 R11: 72657466612d6573 R12: ffff96037d6a6400 R13: ffff9603484805b0 R14: 000000000000000b R15: ffff9603bed06060 FS: 00007f5fd8520c40(0000) GS:ffff960475e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5fda755000 CR3: 000000010d012005 CR4: 00000000003706e0 Call Trace: <TASK> ? show_regs+0x6e/0x80 ? refcount_warn_saturate+0xfb/0x150 ? __warn+0x91/0x150 ? refcount_warn_saturate+0xfb/0x150 ? report_bug+0x19d/0x1b0 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x1d/0x80 ? asm_exc_invalid_op+0x1f/0x30 ? refcount_warn_saturate+0xfb/0x150 drm_gem_object_handle_put_unlocked+0xba/0x110 [drm] drm_gem_object_release_handle+0x6e/0x80 [drm] drm_gem_handle_delete+0x6a/0xc0 [drm] ? __pfx_vmw_bo_unref_ioctl+0x10/0x10 [vmwgfx] vmw_bo_unref_ioctl+0x33/0x40 [vmwgfx] drm_ioctl_kernel+0xbc/0x160 [drm] drm_ioctl+0x2d2/0x580 [drm] ? __pfx_vmw_bo_unref_ioctl+0x10/0x10 [vmwgfx] ? do_vmi_munmap+0xee/0x180 vmw_generic_ioctl+0xbd/0x180 [vmwgfx] vmw_unlocked_ioctl+0x19/0x20 [vmwgfx] __x64_sys_ioctl+0x99/0xd0 do_syscall_64+0x5d/0x90 ? syscall_exit_to_user_mode+0x2a/0x50 ? do_syscall_64+0x6d/0x90 ? handle_mm_fault+0x16e/0x2f0 ? exit_to_user_mode_prepare+0x34/0x170 ? irqentry_exit_to_user_mode+0xd/0x20 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x8e/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f5fda51aaff Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 7> RSP: 002b:00007ffd536a4d30 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffd536a4de0 RCX: 00007f5fda51aaff RDX: 00007ffd536a4de0 RSI: 0000000040086442 RDI: 0000000000000003 RBP: 0000000040086442 R08: 000055fa603ada50 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000246 R12: 00007ffd536a51b8 R13: 0000000000000003 R14: 000055fa5ebb4c80 R15: 00007f5fda90f040 </TASK> ---[ end trace 0000000000000000 ]--- A lot of the analyis on the bug was done by Murray McAllister and Ian Forbes. Reported-by: Murray McAllister <[email protected]> Cc: Ian Forbes <[email protected]> Signed-off-by: Zack Rusin <[email protected]> Fixes: a950b98 ("drm/vmwgfx: Do not drop the reference to the handle too soon") Cc: <[email protected]> # v6.2+ Reviewed-by: Martin Krastev <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Eddie reported that newer kernels were crashing during boot on his 476 FSP2 system: kernel tried to execute user page (b7ee2000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xb7ee2000 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K FSP-2 Modules linked in: CPU: 0 PID: 61 Comm: mount Not tainted 6.1.55-d23900f.ppcnf-fsp2 #1 Hardware name: ibm,fsp2 476fpe 0x7ff520c0 FSP-2 NIP: b7ee2000 LR: 8c008000 CTR: 00000000 REGS: bffebd83 TRAP: 0400 Not tainted (6.1.55-d23900f.ppcnf-fs p2) MSR: 00000030 <IR,DR> CR: 00001000 XER: 20000000 GPR00: c00110ac bffebe63 bffebe7e bffebe88 8c008000 00001000 00000d12 b7ee2000 GPR08: 00000033 00000000 00000000 c139df10 48224824 1016c314 10160000 00000000 GPR16: 10160000 10160000 00000008 00000000 10160000 00000000 10160000 1017f5b0 GPR24: 1017fa50 1017f4f0 1017fa50 1017f740 1017f630 00000000 00000000 1017f4f0 NIP [b7ee2000] 0xb7ee2000 LR [8c008000] 0x8c008000 Call Trace: Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- The problem is in ret_from_syscall where the check for icache_44x_need_flush is done. When the flush is needed the code jumps out-of-line to do the flush, and then intends to jump back to continue the syscall return. However the branch back to label 1b doesn't return to the correct location, instead branching back just prior to the return to userspace, causing bogus register values to be used by the rfi. The breakage was introduced by commit 6f76a01 ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") which inadvertently removed the "1" label and reused it elsewhere. Fix it by adding named local labels in the correct locations. Note that the return label needs to be outside the ifdef so that CONFIG_PPC_47x=n compiles. Fixes: 6f76a01 ("powerpc/syscall: implement system call entry/exit logic in C for PPC32") Cc: [email protected] # v5.12+ Reported-by: Eddie James <[email protected]> Tested-by: Eddie James <[email protected]> Link: https://lore.kernel.org/linuxppc-dev/[email protected]/ Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Link: https://msgid.link/[email protected]

When testing on risc-v QEMU environment with "crashkernel=" parameter enabled, a problem occurred with the following message: [ 0.000000] crashkernel low memory reserved: 0xf8000000 - 0x100000000 (128 MB) [ 0.000000] crashkernel reserved: 0x0000000177e00000 - 0x0000000277e00000 (4096 MB) [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:779 __insert_resource+0x8e/0xd0 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc2-next-20230920 #1 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] epc : __insert_resource+0x8e/0xd0 [ 0.000000] ra : insert_resource+0x28/0x4e [ 0.000000] epc : ffffffff80017344 ra : ffffffff8001742e sp : ffffffff81203db0 [ 0.000000] gp : ffffffff812ece98 tp : ffffffff8120dac0 t0 : ff600001f7ff2b00 [ 0.000000] t1 : 0000000000000000 t2 : 3428203030303030 s0 : ffffffff81203dc0 [ 0.000000] s1 : ffffffff81211e18 a0 : ffffffff81211e18 a1 : ffffffff81289380 [ 0.000000] a2 : 0000000277dfffff a3 : 0000000177e00000 a4 : 0000000177e00000 [ 0.000000] a5 : ffffffff81289380 a6 : 0000000277dfffff a7 : 0000000000000078 [ 0.000000] s2 : ffffffff81289380 s3 : ffffffff80a0bac8 s4 : ff600001f7ff2880 [ 0.000000] s5 : 0000000000000280 s6 : 8000000a00006800 s7 : 000000000000007f [ 0.000000] s8 : 0000000080017038 s9 : 0000000080038ea0 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : ffffffff80a0bc00 t4 : ffffffff80a0bc00 [ 0.000000] t5 : ffffffff80a0bbd0 t6 : ffffffff80a0bc00 [ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.000000] [<ffffffff80017344>] __insert_resource+0x8e/0xd0 [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] Failed to add a Crash kernel resource at 177e00000 The crashkernel memory has been allocated successfully, whereas it failed to insert into iomem_resource. This is due to the unique reserving logic in risc-v arch specific code, i.e. crashk_res/crashk_low_res will be added into iomem_resource later in init_resources(), which is not aligned with current unified reserving logic in reserve_crashkernel_{generic,low}() and therefore leads to the failure of crashkernel reservation. Removing the arch specific code within #ifdef CONFIG_KEXEC_CORE in init_resources() to fix above problem. Fixes: 3154915 ("riscv: kdump: use generic interface to simplify crashkernel reservation") Signed-off-by: Chen Jiahao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>

A GISA cannot be destroyed as long it is linked in the GIB alert list as this would break the alert list. Just waiting for its removal from the list triggered by another vm is not sufficient as it might be the only vm. The below shown cpu stall situation might occur when GIB alerts are delayed and is fixed by calling process_gib_alert_list() instead of waiting. At this time the vcpus of the vm are already destroyed and thus no vcpu can be kicked to enter the SIE again if for some reason an interrupt is pending for that vm. Additionally the IAM restore value is set to 0x00. That would be a bug introduced by incomplete device de-registration, i.e. missing kvm_s390_gisc_unregister() call. Setting this value and the IAM in the GISA to 0x00 guarantees that late interrupts don't bring the GISA back into the alert list. CPU stall caused by kvm_s390_gisa_destroy(): [ 4915.311372] rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 14-.... } 24533 jiffies s: 5269 root: 0x1/. [ 4915.311390] rcu: blocking rcu_node structures (internal RCU debug): l=1:0-15:0x4000/. [ 4915.311394] Task dump for CPU 14: [ 4915.311395] task:qemu-system-s39 state:R running task stack:0 pid:217198 ppid:1 flags:0x00000045 [ 4915.311399] Call Trace: [ 4915.311401] [<0000038003a33a10>] 0x38003a33a10 [ 4933.861321] rcu: INFO: rcu_sched self-detected stall on CPU [ 4933.861332] rcu: 14-....: (42008 ticks this GP) idle=53f4/1/0x4000000000000000 softirq=61530/61530 fqs=14031 [ 4933.861353] rcu: (t=42008 jiffies g=238109 q=100360 ncpus=18) [ 4933.861357] CPU: 14 PID: 217198 Comm: qemu-system-s39 Not tainted 6.5.0-20230816.rc6.git26.a9d17c5d8813.300.fc38.s390x #1 [ 4933.861360] Hardware name: IBM 8561 T01 703 (LPAR) [ 4933.861361] Krnl PSW : 0704e00180000000 000003ff804bfc66 (kvm_s390_gisa_destroy+0x3e/0xe0 [kvm]) [ 4933.861414] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 [ 4933.861416] Krnl GPRS: 0000000000000000 00000372000000fc 00000002134f8000 000000000d5f5900 [ 4933.861419] 00000002f5ea1d18 00000002f5ea1d18 0000000000000000 0000000000000000 [ 4933.861420] 00000002134fa890 00000002134f8958 000000000d5f5900 00000002134f8000 [ 4933.861422] 000003ffa06acf98 000003ffa06858b0 0000038003a33c20 0000038003a33bc8 [ 4933.861430] Krnl Code: 000003ff804bfc58: ec66002b007e cij %r6,0,6,000003ff804bfcae 000003ff804bfc5e: b904003a lgr %r3,%r10 #000003ff804bfc62: a7f40005 brc 15,000003ff804bfc6c >000003ff804bfc66: e330b7300204 lg %r3,10032(%r11) 000003ff804bfc6c: 58003000 l %r0,0(%r3) 000003ff804bfc70: ec03fffb6076 crj %r0,%r3,6,000003ff804bfc66 000003ff804bfc76: e320b7600271 lay %r2,10080(%r11) 000003ff804bfc7c: c0e5fffea339 brasl %r14,000003ff804942ee [ 4933.861444] Call Trace: [ 4933.861445] [<000003ff804bfc66>] kvm_s390_gisa_destroy+0x3e/0xe0 [kvm] [ 4933.861460] ([<00000002623523de>] free_unref_page+0xee/0x148) [ 4933.861507] [<000003ff804aea98>] kvm_arch_destroy_vm+0x50/0x120 [kvm] [ 4933.861521] [<000003ff8049d374>] kvm_destroy_vm+0x174/0x288 [kvm] [ 4933.861532] [<000003ff8049d4fe>] kvm_vm_release+0x36/0x48 [kvm] [ 4933.861542] [<00000002623cd04a>] __fput+0xea/0x2a8 [ 4933.861547] [<00000002620d5bf8>] task_work_run+0x88/0xf0 [ 4933.861551] [<00000002620b0aa6>] do_exit+0x2c6/0x528 [ 4933.861556] [<00000002620b0f00>] do_group_exit+0x40/0xb8 [ 4933.861557] [<00000002620b0fa6>] __s390x_sys_exit_group+0x2e/0x30 [ 4933.861559] [<0000000262d481f4>] __do_syscall+0x1d4/0x200 [ 4933.861563] [<0000000262d59028>] system_call+0x70/0x98 [ 4933.861565] Last Breaking-Event-Address: [ 4933.861566] [<0000038003a33b60>] 0x38003a33b60 Fixes: 9f30f62 ("KVM: s390: add gib_alert_irq_handler()") Signed-off-by: Michael Mueller <[email protected]> Reviewed-by: Matthew Rosato <[email protected]> Reviewed-by: Nico Boehr <[email protected]> Link: https://lore.kernel.org/r/[email protected] Message-ID: <[email protected]> Signed-off-by: Claudio Imbrenda <[email protected]>

Use atomic readl_poll_timeout_atomic, because msdc_reset_hw may be invoked in IRQ handler in the following context: msdc_irq() -> msdc_cmd_done() -> msdc_reset_hw() The following kernel BUG stack trace can be observed on Genio 1200 EVK after initializing MSDC1 hardware during kernel boot: [ 1.187441] BUG: scheduling while atomic: swapper/0/0/0x00010002 [ 1.189157] Modules linked in: [ 1.204633] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.15.42-mtk+modified #1 [ 1.205713] Hardware name: MediaTek Genio 1200 EVK-P1V2-EMMC (DT) [ 1.206484] Call trace: [ 1.206796] dump_backtrace+0x0/0x1ac [ 1.207266] show_stack+0x24/0x30 [ 1.207692] dump_stack_lvl+0x68/0x84 [ 1.208162] dump_stack+0x1c/0x38 [ 1.208587] __schedule_bug+0x68/0x80 [ 1.209056] __schedule+0x6ec/0x7c0 [ 1.209502] schedule+0x7c/0x110 [ 1.209915] schedule_hrtimeout_range_clock+0xc4/0x1f0 [ 1.210569] schedule_hrtimeout_range+0x20/0x30 [ 1.211148] usleep_range_state+0x84/0xc0 [ 1.211661] msdc_reset_hw+0xc8/0x1b0 [ 1.212134] msdc_cmd_done.isra.0+0x4ac/0x5f0 [ 1.212693] msdc_irq+0x104/0x2d4 [ 1.213121] __handle_irq_event_percpu+0x68/0x280 [ 1.213725] handle_irq_event+0x70/0x15c [ 1.214230] handle_fasteoi_irq+0xb0/0x1a4 [ 1.214755] handle_domain_irq+0x6c/0x9c [ 1.215260] gic_handle_irq+0xc4/0x180 [ 1.215741] call_on_irq_stack+0x2c/0x54 [ 1.216245] do_interrupt_handler+0x5c/0x70 [ 1.216782] el1_interrupt+0x30/0x80 [ 1.217242] el1h_64_irq_handler+0x1c/0x2c [ 1.217769] el1h_64_irq+0x78/0x7c [ 1.218206] cpuidle_enter_state+0xc8/0x600 [ 1.218744] cpuidle_enter+0x44/0x5c [ 1.219205] do_idle+0x224/0x2d0 [ 1.219624] cpu_startup_entry+0x30/0x80 [ 1.220129] rest_init+0x108/0x134 [ 1.220568] arch_call_rest_init+0x1c/0x28 [ 1.221094] start_kernel+0x6c0/0x700 [ 1.221564] __primary_switched+0xc0/0xc8 Fixes: ffaea6e ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling") Signed-off-by: Pablo Sun <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>

The cited patch change mlx5 driver so that during probe DMA operations were performed before pci_enable_device(), and during teardown DMA operations were performed after pci_disable_device(). DMA operations require PCI to be enabled. Hence, The above leads to the following oops in PPC systems[1]. On s390x systems, as reported by Niklas Schnelle, this is a problem because mlx5_pci_init() is where the DMA and coherent mask is set but mlx5_cmd_init() already does a dma_alloc_coherent(). Thus a DMA allocation is done during probe before the correct mask is set. This causes probe to fail initialization of the cmdif SW structs on s390x after that is converted to the common dma-iommu code. This is because on s390x DMA addresses below 4 GiB are reserved on current machines and unlike the old s390x specific DMA API implementation common code enforces DMA masks. Fix it by performing the DMA operations during probe after pci_enable_device() and after the dma mask is set, and during teardown before pci_disable_device(). [1] Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 netconsole rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser ib_umad rdma_cm ib_ipoib iw_cm libiscsi scsi_transport_iscsi ib_cm ib_uverbs ib_core mlx5_core(-) ptp pps_core fuse vmx_crypto crc32c_vpmsum [last unloaded: mlx5_ib] CPU: 1 PID: 8937 Comm: modprobe Not tainted 6.5.0-rc3_for_upstream_min_debug_2023_07_31_16_02 #1 Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries NIP: c000000000423388 LR: c0000000001e733c CTR: c0000000001e4720 REGS: c0000000055636d0 TRAP: 0380 Not tainted (6.5.0-rc3_for_upstream_min_debug_2023_07_31_16_02) MSR: 8000000000009033 CR: 24008884 XER: 20040000 CFAR: c0000000001e7338 IRQMASK: 0 NIP [c000000000423388] __free_pages+0x28/0x160 LR [c0000000001e733c] dma_direct_free+0xac/0x190 Call Trace: [c000000005563970] [5deadbeef0000100] 0x5deadbeef0000100 (unreliable) [c0000000055639b0] [c0000000003d46cc] kfree+0x7c/0x150 [c000000005563a40] [c0000000001e47c8] dma_free_attrs+0xa8/0x1a0 [c000000005563aa0] [c008000000d0064c] mlx5_cmd_cleanup+0xa4/0x100 [mlx5_core] [c000000005563ad0] [c008000000cf629c] mlx5_mdev_uninit+0xf4/0x140 [mlx5_core] [c000000005563b00] [c008000000cf6448] remove_one+0x160/0x1d0 [mlx5_core] [c000000005563b40] [c000000000958540] pci_device_remove+0x60/0x110 [c000000005563b80] [c000000000a35e80] device_remove+0x70/0xd0 [c000000005563bb0] [c000000000a37a38] device_release_driver_internal+0x2a8/0x330 [c000000005563c00] [c000000000a37b8c] driver_detach+0x8c/0x160 [c000000005563c40] [c000000000a35350] bus_remove_driver+0x90/0x110 [c000000005563c80] [c000000000a38948] driver_unregister+0x48/0x90 [c000000005563cf0] [c000000000957e38] pci_unregister_driver+0x38/0x150 [c000000005563d40] [c008000000eb6140] mlx5_cleanup+0x38/0x90 [mlx5_core] Fixes: 06cd555 ("net/mlx5: split mlx5_cmd_init() to probe and reload routines") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Reviewed-by: Niklas Schnelle <[email protected]> Tested-by: Niklas Schnelle <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Hold RTNL lock when calling xdp_set_features() with a registered netdev, as the call triggers the netdev notifiers. This could happen when switching from nic profile to uplink representor for example. Similar logic which fixed a similar scenario was previously introduced in the following commit: commit 72cc654 net/mlx5e: Take RTNL lock when needed before calling xdp_set_features(). This fixes the following assertion and warning call trace: RTNL: assertion failed at net/core/dev.c (1961) WARNING: CPU: 13 PID: 2529 at net/core/dev.c:1961 call_netdevice_notifiers_info+0x7c/0x80 Modules linked in: rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_core zram zsmalloc fuse CPU: 13 PID: 2529 Comm: devlink Not tainted 6.5.0_for_upstream_min_debug_2023_09_07_20_04 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80 Code: 8f ff 80 3d 77 0d 16 01 00 75 c5 ba a9 07 00 00 48 c7 c6 c4 bb 0d 82 48 c7 c7 18 c8 06 82 c6 05 5b 0d 16 01 01 e8 44 f6 8c ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec RSP: 0018:ffff88819930f7f0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff8309f740 RCX: 0000000000000027 RDX: ffff88885fb5b5c8 RSI: 0000000000000001 RDI: ffff88885fb5b5c0 RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003 R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff88819930f810 R13: ffff88810b7fea40 R14: ffff8881154e8fd8 R15: ffff888107e881a0 FS: 00007f3ad248f800(0000) GS:ffff88885fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000563b85f164e0 CR3: 0000000113b5c006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x79/0x120 ? call_netdevice_notifiers_info+0x7c/0x80 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? call_netdevice_notifiers_info+0x7c/0x80 call_netdevice_notifiers+0x2e/0x50 mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core] mlx5e_build_rep_params+0x97/0x130 [mlx5_core] mlx5e_init_ul_rep+0x9f/0x100 [mlx5_core] mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core] mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core] mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core] mlx5e_vport_rep_load+0x329/0x4a0 [mlx5_core] mlx5_esw_offloads_rep_load+0x9e/0xf0 [mlx5_core] esw_offloads_enable+0x4bc/0xe90 [mlx5_core] mlx5_eswitch_enable_locked+0x3c8/0x570 [mlx5_core] ? kmalloc_trace+0x25/0x80 mlx5_devlink_eswitch_mode_set+0x224/0x680 [mlx5_core] ? devlink_get_from_attrs_lock+0x9e/0x110 devlink_nl_cmd_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x180/0x2b0 ? devlink_get_from_attrs_lock+0x110/0x110 ? devlink_nl_cmd_eswitch_get_doit+0x290/0x290 ? devlink_pernet_pre_exit+0xf0/0xf0 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1fc/0x2c0 netlink_sendmsg+0x232/0x4a0 sock_sendmsg+0x38/0x60 ? _copy_from_user+0x2a/0x60 __sys_sendto+0x110/0x160 ? handle_mm_fault+0x161/0x260 ? do_user_addr_fault+0x276/0x620 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f3ad231340a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffd70aad4b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000c36b00 RCX:00007f3ad231340a RDX: 0000000000000038 RSI: 0000000000c36b00 RDI: 0000000000000003 RBP: 0000000000c36910 R08: 00007f3ad2625200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 </TASK> ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ Fixes: 4d5ab0a ("net/mlx5e: take into account device reconfiguration for xdp_features flag") Signed-off-by: Lama Kayal <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

On driver load, scsi_add_host() can fail. This triggers the free path to call qla2x00_mem_free() multiple times. This causes NULL pointer access of ha->base_qpair. Add check before access. BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 IP: [<ffffffffc118f73c>] qla2x00_mem_free+0x51c/0xcb0 [qla2xxx] PGD 8000001fcfe4a067 PUD 1fc8f0a067 PMD 0 Oops: 0000 [#1] SMP RIP: 0010:[<ffffffffc118f73c>] [<ffffffffc118f73c>] qla2x00_mem_free+0x51c/0xcb0 [qla2xxx] RSP: 0018:ffff8ace97a93a30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8ace8efd0000 RCX: 000000000000488f RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff8ace97a93a60 R08: 000000000001f040 R09: ffffffff8678209b R10: ffff8acf7d6df040 R11: ffffc591c0fcc980 R12: ffffffff87034800 R13: ffff8acf0e3cc740 R14: ffff8ace8efd0000 R15: 00000000fffffff4 FS: 00007f4cf5449740(0000) GS:ffff8acf7d6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000030 CR3: 0000001fc2f6c000 CR4: 00000000007607e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff86781f18>] ? kobject_put+0x28/0x60 [<ffffffffc119a59c>] qla2x00_probe_one+0x19fc/0x3040 [qla2xxx] Fixes: efeda3b ("scsi: qla2xxx: Move resource to allow code reuse") Signed-off-by: Quinn Tran <[email protected]> Signed-off-by: Nilesh Javali <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]>

…ress If we specify a valid CQ ring address but an invalid SQ ring address, we'll correctly spot this and free the allocated pages and clear them to NULL. However, we don't clear the ring page count, and hence will attempt to free the pages again. We've already cleared the address of the page array when freeing them, but we don't check for that. This causes the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Oops [#1] Modules linked in: CPU: 0 PID: 20 Comm: kworker/u2:1 Not tainted 6.6.0-rc5-dirty torvalds#56 Hardware name: ucbbar,riscvemu-bare (DT) Workqueue: events_unbound io_ring_exit_work epc : io_pages_free+0x2a/0x58 ra : io_rings_free+0x3a/0x50 epc : ffffffff808811a2 ra : ffffffff80881406 sp : ffff8f80000c3cd0 status: 0000000200000121 badaddr: 0000000000000000 cause: 000000000000000d [<ffffffff808811a2>] io_pages_free+0x2a/0x58 [<ffffffff80881406>] io_rings_free+0x3a/0x50 [<ffffffff80882176>] io_ring_exit_work+0x37e/0x424 [<ffffffff80027234>] process_one_work+0x10c/0x1f4 [<ffffffff8002756e>] worker_thread+0x252/0x31c [<ffffffff8002f5e4>] kthread+0xc4/0xe0 [<ffffffff8000332a>] ret_from_fork+0xa/0x1c Check for a NULL array in io_pages_free(), but also clear the page counts when we free them to be on the safer side. Reported-by: [email protected] Fixes: 03d89a2 ("io_uring: support for user allocated memory for rings/sqes") Cc: [email protected] Reviewed-by: Jeff Moyer <[email protected]> Signed-off-by: Jens Axboe <[email protected]>

when the checked address is illegal,the corresponding shadow address from kasan_mem_to_shadow may have no mapping in mmu table. Access such shadow address causes kernel oops. Here is a sample about oops on arm64(VA 39bit) with KASAN_SW_TAGS and KASAN_OUTLINE on: [ffffffb80aaaaaaa] pgd=000000005d3ce003, p4d=000000005d3ce003, pud=000000005d3ce003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: CPU: 3 PID: 100 Comm: sh Not tainted 6.6.0-rc1-dirty torvalds#43 Hardware name: linux,dummy-virt (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __hwasan_load8_noabort+0x5c/0x90 lr : do_ib_ob+0xf4/0x110 ffffffb80aaaaaaa is the shadow address for efffff80aaaaaaaa. The problem is reading invalid shadow in kasan_check_range. The generic kasan also has similar oops. It only reports the shadow address which causes oops but not the original address. Commit 2f004ee("x86/kasan: Print original address on #GP") introduce to kasan_non_canonical_hook but limit it to KASAN_INLINE. This patch extends it to KASAN_OUTLINE mode. Link: https://lkml.kernel.org/r/[email protected] Fixes: 2f004ee("x86/kasan: Print original address on #GP") Signed-off-by: Haibo Li <[email protected]> Reviewed-by: Andrey Konovalov <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: AngeloGioacchino Del Regno <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Haibo Li <[email protected]> Cc: Matthias Brugger <[email protected]> Cc: Vincenzo Frascino <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Kees Cook <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

As drm_dp_get_mst_branch_device_by_guid() is called from drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked, otherwise NULL dereference may occur in the call to the memcpy() and cause following: [12579.365869] BUG: kernel NULL pointer dereference, address: 0000000000000049 [12579.365878] #PF: supervisor read access in kernel mode [12579.365880] #PF: error_code(0x0000) - not-present page [12579.365882] PGD 0 P4D 0 [12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI ... [12579.365895] Workqueue: events_long drm_dp_mst_up_req_work [12579.365899] RIP: 0010:memcmp+0xb/0x29 [12579.365921] Call Trace: [12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64 [12579.365930] drm_dp_mst_up_req_work+0x137/0x416 [12579.365933] process_one_work+0x1d0/0x419 [12579.365935] worker_thread+0x11a/0x289 [12579.365938] kthread+0x13e/0x14f [12579.365941] ? process_one_work+0x419/0x419 [12579.365943] ? kthread_blkcg+0x31/0x31 [12579.365946] ret_from_fork+0x1f/0x30 As get_mst_branch_device_by_guid_helper() is recursive, moving condition to the first line allow to remove a similar one for step over of NULL elements inside a loop. Fixes: 5e93b82 ("drm/dp/mst: move GUID storage from mgr, port to only mst branch") Cc: <[email protected]> # 4.14+ Signed-off-by: Lukasz Majczak <[email protected]> Reviewed-by: Radoslaw Biernacki <[email protected]> Signed-off-by: Manasi Navare <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Erhard reported that his G5 was crashing with v6.6-rc kernels: mpic: Setting up HT PICs workarounds for U3/U4 BUG: Unable to handle kernel data access at 0xfeffbb62ffec65fe Faulting instruction address: 0xc00000000005dc40 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Tainted: G T 6.6.0-rc3-PMacGS #1 Hardware name: PowerMac11,2 PPC970MP 0x440101 PowerMac NIP: c00000000005dc40 LR: c000000000066660 CTR: c000000000007730 REGS: c0000000022bf510 TRAP: 0380 Tainted: G T (6.6.0-rc3-PMacGS) MSR: 9000000000001032 <SF,HV,ME,IR,DR,RI> CR: 44004242 XER: 00000000 IRQMASK: 3 GPR00: 0000000000000000 c0000000022bf7b0 c0000000010c0b00 00000000000001ac GPR04: 0000000003c80000 0000000000000300 c0000000f20001ae 0000000000000300 GPR08: 0000000000000006 feffbb62ffec65ff 0000000000000001 0000000000000000 GPR12: 9000000000001032 c000000002362000 c000000000f76b80 000000000349ecd8 GPR16: 0000000002367ba8 0000000002367f08 0000000000000006 0000000000000000 GPR20: 00000000000001ac c000000000f6f920 c0000000022cd985 000000000000000c GPR24: 0000000000000300 00000003b0a3691d c0003e008030000e 0000000000000000 GPR28: c00000000000000c c0000000f20001ee feffbb62ffec65fe 00000000000001ac NIP hash_page_do_lazy_icache+0x50/0x100 LR __hash_page_4K+0x420/0x590 Call Trace: hash_page_mm+0x364/0x6f0 do_hash_fault+0x114/0x2b0 data_access_common_virt+0x198/0x1f0 --- interrupt: 300 at mpic_init+0x4bc/0x10c4 NIP: c000000002020a5c LR: c000000002020a04 CTR: 0000000000000000 REGS: c0000000022bf9f0 TRAP: 0300 Tainted: G T (6.6.0-rc3-PMacGS) MSR: 9000000000001032 <SF,HV,ME,IR,DR,RI> CR: 24004248 XER: 00000000 DAR: c0003e008030000e DSISR: 40000000 IRQMASK: 1 ... NIP mpic_init+0x4bc/0x10c4 LR mpic_init+0x464/0x10c4 --- interrupt: 300 pmac_setup_one_mpic+0x258/0x2dc pmac_pic_init+0x28c/0x3d8 init_IRQ+0x90/0x140 start_kernel+0x57c/0x78c start_here_common+0x1c/0x20 A bisect pointed to the breakage beginning with commit 9fee28b ("powerpc: implement the new page table range API"). Analysis of the oops pointed to a struct page with a corrupted compound_head being loaded via page_folio() -> _compound_head() in hash_page_do_lazy_icache(). The access by the mpic code is to an MMIO address, so the expectation is that the struct page for that address would be initialised by init_unavailable_range(), as pointed out by Aneesh. Instrumentation showed that was not the case, which eventually lead to the realisation that pfn_valid() was returning false for that address, causing the struct page to not be initialised. Because the system is using FLATMEM, the version of pfn_valid() in memory_model.h is used: static inline int pfn_valid(unsigned long pfn) { ... return pfn >= pfn_offset && (pfn - pfn_offset) < max_mapnr; } Which relies on max_mapnr being initialised. Early in boot max_mapnr is zero meaning no PFNs are valid. max_mapnr is initialised in mem_init() called via: start_kernel() mm_core_init() # init/main.c:928 mem_init() But that is too late for the usage in init_unavailable_range() called via: start_kernel() setup_arch() # init/main.c:893 paging_init() free_area_init() init_unavailable_range() Although max_mapnr is currently set in mem_init(), the value is actually already available much earlier, as soon as mem_topology_setup() has completed, which is also before paging_init() is called. So move the initialisation there, which causes paging_init() to correctly initialise the struct page and fixes the bug. This bug seems to have been lurking for years, but went unnoticed because the pre-folio code was inspecting the uninitialised page->flags but not dereferencing it. Thanks to Erhard and Aneesh for help debugging. Reported-by: Erhard Furtner <[email protected]> Closes: https://lore.kernel.org/all/20230929132750.3cd98452@yea/ Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]

commit bb32500 upstream The following can crash the kernel: # cd /sys/kernel/tracing # echo 'p:sched schedule' > kprobe_events # exec 5>>events/kprobes/sched/enable # > kprobe_events # exec 5>&- The above commands: 1. Change directory to the tracefs directory 2. Create a kprobe event (doesn't matter what one) 3. Open bash file descriptor 5 on the enable file of the kprobe event 4. Delete the kprobe event (removes the files too) 5. Close the bash file descriptor 5 The above causes a crash! BUG: kernel NULL pointer dereference, address: 0000000000000028 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty torvalds#186 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:tracing_release_file_tr+0xc/0x50 What happens here is that the kprobe event creates a trace_event_file "file" descriptor that represents the file in tracefs to the event. It maintains state of the event (is it enabled for the given instance?). Opening the "enable" file gets a reference to the event "file" descriptor via the open file descriptor. When the kprobe event is deleted, the file is also deleted from the tracefs system which also frees the event "file" descriptor. But as the tracefs file is still opened by user space, it will not be totally removed until the final dput() is called on it. But this is not true with the event "file" descriptor that is already freed. If the user does a write to or simply closes the file descriptor it will reference the event "file" descriptor that was just freed, causing a use-after-free bug. To solve this, add a ref count to the event "file" descriptor as well as a new flag called "FREED". The "file" will not be freed until the last reference is released. But the FREE flag will be set when the event is removed to prevent any more modifications to that event from happening, even if there's still a reference to the event "file" descriptor. Link: https://lore.kernel.org/linux-trace-kernel/[email protected]/ Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: [email protected] Cc: Mark Rutland <[email protected]> Fixes: f5ca233 ("tracing: Increase trace array ref count on enable and filter files") Reported-by: Beau Belgrave <[email protected]> Tested-by: Beau Belgrave <[email protected]> Reviewed-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 4a8e65b ] SRCU callbacks acceleration might fail if the preceding callbacks advance also fails. This can happen when the following steps are met: 1) The RCU_WAIT_TAIL segment has callbacks (say for gp_num 8) and the RCU_NEXT_READY_TAIL also has callbacks (say for gp_num 12). 2) The grace period for RCU_WAIT_TAIL is observed as started but not yet completed so rcu_seq_current() returns 4 + SRCU_STATE_SCAN1 = 5. 3) This value is passed to rcu_segcblist_advance() which can't move any segment forward and fails. 4) srcu_gp_start_if_needed() still proceeds with callback acceleration. But then the call to rcu_seq_snap() observes the grace period for the RCU_WAIT_TAIL segment (gp_num 8) as completed and the subsequent one for the RCU_NEXT_READY_TAIL segment as started (ie: 8 + SRCU_STATE_SCAN1 = 9) so it returns a snapshot of the next grace period, which is 16. 5) The value of 16 is passed to rcu_segcblist_accelerate() but the freshly enqueued callback in RCU_NEXT_TAIL can't move to RCU_NEXT_READY_TAIL which already has callbacks for a previous grace period (gp_num = 12). So acceleration fails. 6) Note in all these steps, srcu_invoke_callbacks() hadn't had a chance to run srcu_invoke_callbacks(). Then some very bad outcome may happen if the following happens: 7) Some other CPU races and starts the grace period number 16 before the CPU handling previous steps had a chance. Therefore srcu_gp_start() isn't called on the latter sdp to fix the acceleration leak from previous steps with a new pair of call to advance/accelerate. 8) The grace period 16 completes and srcu_invoke_callbacks() is finally called. All the callbacks from previous grace periods (8 and 12) are correctly advanced and executed but callbacks in RCU_NEXT_READY_TAIL still remain. Then rcu_segcblist_accelerate() is called with a snaphot of 20. 9) Since nothing started the grace period number 20, callbacks stay unhandled. This has been reported in real load: [3144162.608392] INFO: task kworker/136:12:252684 blocked for more than 122 seconds. [3144162.615986] Tainted: G O K 5.4.203-1-tlinux4-0011.1 #1 [3144162.623053] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [3144162.631162] kworker/136:12 D 0 252684 2 0x90004000 [3144162.631189] Workqueue: kvm-irqfd-cleanup irqfd_shutdown [kvm] [3144162.631192] Call Trace: [3144162.631202] __schedule+0x2ee/0x660 [3144162.631206] schedule+0x33/0xa0 [3144162.631209] schedule_timeout+0x1c4/0x340 [3144162.631214] ? update_load_avg+0x82/0x660 [3144162.631217] ? raw_spin_rq_lock_nested+0x1f/0x30 [3144162.631218] wait_for_completion+0x119/0x180 [3144162.631220] ? wake_up_q+0x80/0x80 [3144162.631224] __synchronize_srcu.part.19+0x81/0xb0 [3144162.631226] ? __bpf_trace_rcu_utilization+0x10/0x10 [3144162.631227] synchronize_srcu+0x5f/0xc0 [3144162.631236] irqfd_shutdown+0x3c/0xb0 [kvm] [3144162.631239] ? __schedule+0x2f6/0x660 [3144162.631243] process_one_work+0x19a/0x3a0 [3144162.631244] worker_thread+0x37/0x3a0 [3144162.631247] kthread+0x117/0x140 [3144162.631247] ? process_one_work+0x3a0/0x3a0 [3144162.631248] ? __kthread_cancel_work+0x40/0x40 [3144162.631250] ret_from_fork+0x1f/0x30 Fix this with taking the snapshot for acceleration _before_ the read of the current grace period number. The only side effect of this solution is that callbacks advancing happen then _after_ the full barrier in rcu_seq_snap(). This is not a problem because that barrier only cares about: 1) Ordering accesses of the update side before call_srcu() so they don't bleed. 2) See all the accesses prior to the grace period of the current gp_num The only things callbacks advancing need to be ordered against are carried by snp locking. Reported-by: Yong He <[email protected]> Co-developed-by:: Yong He <[email protected]> Signed-off-by: Yong He <[email protected]> Co-developed-by: Joel Fernandes (Google) <[email protected]> Signed-off-by: Joel Fernandes (Google) <[email protected]> Co-developed-by: Neeraj upadhyay <[email protected]> Signed-off-by: Neeraj upadhyay <[email protected]> Link: http://lore.kernel.org/CANZk6aR+CqZaqmMWrC2eRRPY12qAZnDZLwLnHZbNi=xXMB401g@mail.gmail.com Fixes: da915ad ("srcu: Parallelize callback handling") Signed-off-by: Frederic Weisbecker <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d5252d9 ] The clock dividers might be used with clock stop bit enabled or not. Current tables only support recommended values from the datasheet. This might result in warnings like below because no valid clock divider is found. Resulting in a 0 divider. There are Renesas ARM Trusted Firmware version out there which e.g. configure 0x201 (shifted logical right by 2: 0x80) and with this match the added { STPnHCK | 0, 1 }: https://github.com/renesas-rcar/arm-trusted-firmware/blob/rcar_gen3_v2.3/drivers/renesas/rcar/emmc/emmc_init.c#L108 ------------[ cut here ]------------ sd1h: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set WARNING: CPU: 1 PID: 1 at drivers/clk/clk-divider.c:141 divider_recalc_rate+0x48/0x70 Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.52 #1 Hardware name: Custom board based on r8a7796 (DT) pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : divider_recalc_rate+0x48/0x70 ... ------------[ cut here ]------------ Fixes: bb6d3fa ("clk: renesas: rcar-gen3: Switch to new SD clock handling") Signed-off-by: Dirk Behme <[email protected]> [wsa: extended the table to 5 entries, added comments, reword commit message a little] Signed-off-by: Wolfram Sang <[email protected]> Tested-by: Dirk Behme <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4428399 ] The lt8912b driver, in its bridge detach function, calls drm_connector_unregister() and drm_connector_cleanup(). drm_connector_unregister() should be called only for connectors explicitly registered with drm_connector_register(), which is not the case in lt8912b. The driver's drm_connector_funcs.destroy hook is set to drm_connector_cleanup(). Thus the driver should not call either drm_connector_unregister() nor drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a crash on bridge detach: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000000858f3000 [0000000000000000] pgd=0800000085918003, p4d=0800000085918003, pud=0800000085431003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: tidss(-) display_connector lontium_lt8912b tc358768 panel_lvds panel_simple drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks CPU: 3 PID: 462 Comm: rmmod Tainted: G W 6.5.0-rc2+ #2 Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_connector_cleanup+0x78/0x2d4 [drm] lr : lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] sp : ffff800082ed3a90 x29: ffff800082ed3a90 x28: ffff0000040c1940 x27: 0000000000000000 x26: 0000000000000000 x25: dead000000000122 x24: dead000000000122 x23: dead000000000100 x22: ffff000003fb6388 x21: 0000000000000000 x20: 0000000000000000 x19: ffff000003fb6260 x18: fffffffffffe56e8 x17: 0000000000000000 x16: 0010000000000000 x15: 0000000000000038 x14: 0000000000000000 x13: ffff800081914b48 x12: 000000000000040e x11: 000000000000015a x10: ffff80008196ebb8 x9 : ffff800081914b48 x8 : 00000000ffffefff x7 : ffff0000040c1940 x6 : ffff80007aa649d0 x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff80008159e008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: drm_connector_cleanup+0x78/0x2d4 [drm] lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b] drm_bridge_detach+0x44/0x84 [drm] drm_encoder_cleanup+0x40/0xb8 [drm] drmm_encoder_alloc_release+0x1c/0x30 [drm] drm_managed_release+0xac/0x148 [drm] drm_dev_put.part.0+0x88/0xb8 [drm] devm_drm_dev_init_release+0x14/0x24 [drm] devm_action_release+0x14/0x20 release_nodes+0x5c/0x90 devres_release_all+0x8c/0xe0 device_unbind_cleanup+0x18/0x68 device_release_driver_internal+0x208/0x23c driver_detach+0x4c/0x94 bus_remove_driver+0x70/0xf4 driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 tidss_platform_driver_exit+0x18/0xb2c [tidss] __arm64_sys_delete_module+0x1a0/0x2b4 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x60/0x10c do_el0_svc_compat+0x1c/0x40 el0_svc_compat+0x40/0xac el0t_32_sync_handler+0xb0/0x138 el0t_32_sync+0x194/0x198 Code: 9104a276 f2fbd5b7 aa0203e1 91008af8 (f85c0420) Fixes: 30e2ae9 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Robert Foss <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

…i_hns3_pmu uninit process [ Upstream commit 50b5607 ] When tearing down a 'hisi_hns3' PMU, we mistakenly run the CPU hotplug callbacks after the device has been unregistered, leading to fireworks when we try to execute empty function callbacks within the driver: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | CPU: 0 PID: 15 Comm: cpuhp/0 Tainted: G W O 5.12.0-rc4+ #1 | Hardware name: , BIOS KpxxxFPGA 1P B600 V143 04/22/2021 | pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) | pc : perf_pmu_migrate_context+0x98/0x38c | lr : perf_pmu_migrate_context+0x94/0x38c | | Call trace: | perf_pmu_migrate_context+0x98/0x38c | hisi_hns3_pmu_offline_cpu+0x104/0x12c [hisi_hns3_pmu] Use cpuhp_state_remove_instance_nocalls() instead of cpuhp_state_remove_instance() so that the notifiers don't execute after the PMU device has been unregistered. Fixes: 66637ab ("drivers/perf: hisi: add driver for HNS3 PMU") Signed-off-by: Hao Chen <[email protected]> Signed-off-by: Jijie Shao <[email protected]> Reviewed-by: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] [will: Rewrote commit message] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…it_event_hooks() [ Upstream commit 91cfe0b ] When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and then the below user-memory-access bug occurs. In hid_test_uclogic_params_cleanup_event_hooks(),it call uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata() will access hdev->dev with hdev=NULL, which will cause below user-memory-access. So add a fake_device with quirks member and call hid_set_drvdata() to assign hdev->dev->driver_data which avoids the null-ptr-def bug for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying this patch, the below user-memory-access bug never occurs. general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f] CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ torvalds#30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 ? sched_clock_cpu+0x69/0x550 ? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70 ? load_balance+0x2950/0x2950 ? rcu_trc_cmpxchg_need_qs+0x67/0xa0 hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0 ? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600 ? __switch_to+0x5cf/0xe60 ? migrate_enable+0x260/0x260 ? __kthread_parkme+0x83/0x150 ? kunit_try_run_case_cleanup+0xe0/0xe0 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b5/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 1 seconds.. Fixes: a251d65 ("HID: uclogic: Handle wireless device reconnection") Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: José Expósito <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a84fbf2 ] Generating metrics llc_code_read_mpi_demand_plus_prefetch, llc_data_read_mpi_demand_plus_prefetch, llc_miss_local_memory_bandwidth_read, llc_miss_local_memory_bandwidth_write, nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read, memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw, C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency, C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency, C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would trigger an address sanitizer heap-buffer-overflows on a SkylakeX. ``` ==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98 READ of size 4 at 0x5020003eee78 thread T0 #0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12 #1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6 #2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9 #3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31 #4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18 #5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3 #6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5 #7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2 #8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3 #9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11 #10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8 #11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2 #12 0x558265bb9389 in main tools/perf/perf.c:537:3 ``` The issue was the use of testing a cpumap with NULL rather than using empty, as a map containing the dummy value isn't NULL and the -1 results in an empty aggr map being allocated which legitimately overflows when any member is accessed. Fixes: 8a96f45 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ede72dc ] Fuzzing found that an invalid tracepoint name would create a memory leak with an address sanitizer build: ``` $ perf stat -e '*:o/' true event syntax error: '*:o/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ================================================================= ==59380==ERROR: LeakSanitizer: detected memory leaks Direct leak of 4 byte(s) in 2 object(s) allocated from: #0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x55f2f41be73b in str util/parse-events.l:49 #2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338 #3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464 #4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822 #5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094 #6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279 #7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251 #8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351 #9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539 #10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654 #11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501 #12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322 #13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375 #14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419 #15 0x55f2f409412b in main tools/perf/perf.c:535 SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s). ``` Fix by adding the missing destructor. Fixes: 865582c ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <[email protected]> Cc: He Kuang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 265f3ed ] All callers of work_on_cpu() share the same lock class key for all the functions queued. As a result the workqueue related locking scenario for a function A may be spuriously accounted as an inversion against the locking scenario of function B such as in the following model: long A(void *arg) { mutex_lock(&mutex); mutex_unlock(&mutex); } long B(void *arg) { } void launchA(void) { work_on_cpu(0, A, NULL); } void launchB(void) { mutex_lock(&mutex); work_on_cpu(1, B, NULL); mutex_unlock(&mutex); } launchA and launchB running concurrently have no chance to deadlock. However the above can be reported by lockdep as a possible locking inversion because the works containing A() and B() are treated as belonging to the same locking class. The following shows an existing example of such a spurious lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.6.0-rc1-00065-g934ebd6e5359 #35409 Not tainted ------------------------------------------------------ kworker/0:1/9 is trying to acquire lock: ffffffff9bc72f30 (cpu_hotplug_lock){++++}-{0:0}, at: _cpu_down+0x57/0x2b0 but task is already holding lock: ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __flush_work+0x83/0x4e0 work_on_cpu+0x97/0xc0 rcu_nocb_cpu_offload+0x62/0xb0 rcu_nocb_toggle+0xd0/0x1d0 kthread+0xe6/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x1b/0x30 -> #1 (rcu_state.barrier_mutex){+.+.}-{3:3}: __mutex_lock+0x81/0xc80 rcu_nocb_cpu_deoffload+0x38/0xb0 rcu_nocb_toggle+0x144/0x1d0 kthread+0xe6/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x1b/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1538/0x2500 lock_acquire+0xbf/0x2a0 percpu_down_write+0x31/0x200 _cpu_down+0x57/0x2b0 __cpu_down_maps_locked+0x10/0x20 work_for_cpu_fn+0x15/0x20 process_scheduled_works+0x2a7/0x500 worker_thread+0x173/0x330 kthread+0xe6/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x1b/0x30 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> rcu_state.barrier_mutex --> (work_completion)(&wfc.work) Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&wfc.work)); lock(rcu_state.barrier_mutex); lock((work_completion)(&wfc.work)); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by kworker/0:1/9: #0: ffff900481068b38 ((wq_completion)events){+.+.}-{0:0}, at: process_scheduled_works+0x212/0x500 #1: ffff9e3bc0057e60 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_scheduled_works+0x216/0x500 stack backtrace: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.6.0-rc1-00065-g934ebd6e5359 #35409 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Workqueue: events work_for_cpu_fn Call Trace: rcu-torture: rcu_torture_read_exit: Start of episode <TASK> dump_stack_lvl+0x4a/0x80 check_noncircular+0x132/0x150 __lock_acquire+0x1538/0x2500 lock_acquire+0xbf/0x2a0 ? _cpu_down+0x57/0x2b0 percpu_down_write+0x31/0x200 ? _cpu_down+0x57/0x2b0 _cpu_down+0x57/0x2b0 __cpu_down_maps_locked+0x10/0x20 work_for_cpu_fn+0x15/0x20 process_scheduled_works+0x2a7/0x500 worker_thread+0x173/0x330 ? __pfx_worker_thread+0x10/0x10 kthread+0xe6/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK Fix this with providing one lock class key per work_on_cpu() caller. Reported-and-tested-by: Paul E. McKenney <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 170c75d ] As talked about in commit d66d24a ("ath10k: Keep track of which interrupts fired, don't poll them"), if we access the copy engine register at a bad time then ath10k can go boom. However, it's not necessarily easy to know when it's safe to access them. The ChromeOS test labs saw a crash that looked like this at shutdown/reboot time (on a chromeos-5.15 kernel, but likely the problem could also reproduce upstream): Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP ... CPU: 4 PID: 6168 Comm: reboot Not tainted 5.15.111-lockdep-19350-g1d624fe6758f #1 010b9b233ab055c27c6dc88efb0be2f4e9e86f51 Hardware name: Google Kingoftown (DT) ... pc : ath10k_snoc_read32+0x50/0x74 [ath10k_snoc] lr : ath10k_snoc_read32+0x24/0x74 [ath10k_snoc] ... Call trace: ath10k_snoc_read32+0x50/0x74 [ath10k_snoc ...] ath10k_ce_disable_interrupt+0x190/0x65c [ath10k_core ...] ath10k_ce_disable_interrupts+0x8c/0x120 [ath10k_core ...] ath10k_snoc_hif_stop+0x78/0x660 [ath10k_snoc ...] ath10k_core_stop+0x13c/0x1ec [ath10k_core ...] ath10k_halt+0x398/0x5b0 [ath10k_core ...] ath10k_stop+0xfc/0x1a8 [ath10k_core ...] drv_stop+0x148/0x6b4 [mac80211 ...] ieee80211_stop_device+0x70/0x80 [mac80211 ...] ieee80211_do_stop+0x10d8/0x15b0 [mac80211 ...] ieee80211_stop+0x144/0x1a0 [mac80211 ...] __dev_close_many+0x1e8/0x2c0 dev_close_many+0x198/0x33c dev_close+0x140/0x210 cfg80211_shutdown_all_interfaces+0xc8/0x1e0 [cfg80211 ...] ieee80211_remove_interfaces+0x118/0x5c4 [mac80211 ...] ieee80211_unregister_hw+0x64/0x1f4 [mac80211 ...] ath10k_mac_unregister+0x4c/0xf0 [ath10k_core ...] ath10k_core_unregister+0x80/0xb0 [ath10k_core ...] ath10k_snoc_free_resources+0xb8/0x1ec [ath10k_snoc ...] ath10k_snoc_shutdown+0x98/0xd0 [ath10k_snoc ...] platform_shutdown+0x7c/0xa0 device_shutdown+0x3e0/0x58c kernel_restart_prepare+0x68/0xa0 kernel_restart+0x28/0x7c Though there's no known way to reproduce the problem, it makes sense that it would be the same issue where we're trying to access copy engine registers when it's not allowed. Let's fix this by changing how we "disable" the interrupts. Instead of tweaking the copy engine registers we'll just use disable_irq() and enable_irq(). Then we'll configure the interrupts once at power up time. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1 Signed-off-by: Douglas Anderson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20230630151842.1.If764ede23c4e09a43a842771c2ddf99608f25f8e@changeid Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 624820f ] fix crash because of null pointers [ 6104.969662] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 6104.969667] #PF: supervisor read access in kernel mode [ 6104.969668] #PF: error_code(0x0000) - not-present page [ 6104.969670] PGD 0 P4D 0 [ 6104.969673] Oops: 0000 [#1] SMP NOPTI [ 6104.969684] RIP: 0010:btusb_mtk_hci_wmt_sync+0x144/0x220 [btusb] [ 6104.969688] RSP: 0018:ffffb8d681533d48 EFLAGS: 00010246 [ 6104.969689] RAX: 0000000000000000 RBX: ffff8ad560bb2000 RCX: 0000000000000006 [ 6104.969691] RDX: 0000000000000000 RSI: ffffb8d681533d08 RDI: 0000000000000000 [ 6104.969692] RBP: ffffb8d681533d70 R08: 0000000000000001 R09: 0000000000000001 [ 6104.969694] R10: 0000000000000001 R11: 00000000fa83b2da R12: ffff8ad461d1d7c0 [ 6104.969695] R13: 0000000000000000 R14: ffff8ad459618c18 R15: ffffb8d681533d90 [ 6104.969697] FS: 00007f5a1cab9d40(0000) GS:ffff8ad578200000(0000) knlGS:00000 [ 6104.969699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6104.969700] CR2: 00000000000000c8 CR3: 000000018620c001 CR4: 0000000000760ef0 [ 6104.969701] PKRU: 55555554 [ 6104.969702] Call Trace: [ 6104.969708] btusb_mtk_shutdown+0x44/0x80 [btusb] [ 6104.969732] hci_dev_do_close+0x470/0x5c0 [bluetooth] [ 6104.969748] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 6104.969753] rfkill_set_block+0x92/0x160 [ 6104.969755] rfkill_fop_write+0x136/0x1e0 [ 6104.969759] __vfs_write+0x18/0x40 [ 6104.969761] vfs_write+0xdf/0x1c0 [ 6104.969763] ksys_write+0xb1/0xe0 [ 6104.969765] __x64_sys_write+0x1a/0x20 [ 6104.969769] do_syscall_64+0x51/0x180 [ 6104.969771] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 6104.969773] RIP: 0033:0x7f5a21f18fef [ 6104.9] RSP: 002b:00007ffeefe39010 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 6104.969780] RAX: ffffffffffffffda RBX: 000055c10a7560a0 RCX: 00007f5a21f18fef [ 6104.969781] RDX: 0000000000000008 RSI: 00007ffeefe39060 RDI: 0000000000000012 [ 6104.969782] RBP: 00007ffeefe39060 R08: 0000000000000000 R09: 0000000000000017 [ 6104.969784] R10: 00007ffeefe38d97 R11: 0000000000000293 R12: 0000000000000002 [ 6104.969785] R13: 00007ffeefe39220 R14: 00007ffeefe391a0 R15: 000055c10a72acf0 Signed-off-by: youwan Wang <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 5104fdf ] In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic torvalds#46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ end trace ac65a538d240da39 ]--- [4005007.800865] RIP: 0010:0x0 [4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.800874] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.800878] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.800881] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.800883] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.800886] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.800888] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.800891] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.800895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.800898] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 Signed-off-by: Qu Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 87c3a58 ] Except on x86, preempt_count is always accessed with READ_ONCE(). Repeated invocations in macros like irq_count() produce repeated loads. These redundant instructions appear in various fast paths. In the one shown below, for example, irq_count() is evaluated during kernel entry if !tick_nohz_full_cpu(smp_processor_id()). 0001ed0a <irq_enter_rcu>: 1ed0a: 4e56 0000 linkw %fp,#0 1ed0e: 200f movel %sp,%d0 1ed10: 0280 ffff e000 andil #-8192,%d0 1ed16: 2040 moveal %d0,%a0 1ed18: 2028 0008 movel %a0@(8),%d0 1ed1c: 0680 0001 0000 addil #65536,%d0 1ed22: 2140 0008 movel %d0,%a0@(8) 1ed26: 082a 0001 000f btst #1,%a2@(15) 1ed2c: 670c beqs 1ed3a <irq_enter_rcu+0x30> 1ed2e: 2028 0008 movel %a0@(8),%d0 1ed32: 2028 0008 movel %a0@(8),%d0 1ed36: 2028 0008 movel %a0@(8),%d0 1ed3a: 4e5e unlk %fp 1ed3c: 4e75 rts This patch doesn't prevent the pointless btst and beqs instructions above, but it does eliminate 2 of the 3 pointless move instructions here and elsewhere. On x86, preempt_count is per-cpu data and the problem does not arise presumably because the compiler is free to optimize more effectively. This patch was tested on m68k and x86. I was expecting no changes to object code for x86 and mostly that's what I saw. However, there were a few places where code generation was perturbed for some reason. The performance issue addressed here is minor on uniprocessor m68k. I got a 0.01% improvement from this patch for a simple "find /sys -false" benchmark. For architectures and workloads susceptible to cache line bounce the improvement is expected to be larger. The only SMP architecture I have is x86, and as x86 unaffected I have not done any further measurements. Fixes: 1511583 ("preempt: Cleanup the macro maze a bit") Signed-off-by: Finn Thain <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/0a403120a682a525e6db2d81d1a3ffcc137c3742.1694756831.git.fthain@linux-m68k.org Signed-off-by: Sasha Levin <[email protected]>

commit ab244dd upstream. Jordy reported issue against XSKMAP which also applies to DEVMAP - the index used for accessing map entry, due to being a signed integer, causes the OOB writes. Fix is simple as changing the type from int to u32, however, when compared to XSKMAP case, one more thing needs to be addressed. When map is released from system via dev_map_free(), we iterate through all of the entries and an iterator variable is also an int, which implies OOB accesses. Again, change it to be u32. Example splat below: [ 160.724676] BUG: unable to handle page fault for address: ffffc8fc2c001000 [ 160.731662] #PF: supervisor read access in kernel mode [ 160.736876] #PF: error_code(0x0000) - not-present page [ 160.742095] PGD 0 P4D 0 [ 160.744678] Oops: Oops: 0000 [#1] PREEMPT SMP [ 160.749106] CPU: 1 UID: 0 PID: 520 Comm: kworker/u145:12 Not tainted 6.12.0-rc1+ torvalds#487 [ 160.757050] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 160.767642] Workqueue: events_unbound bpf_map_free_deferred [ 160.773308] RIP: 0010:dev_map_free+0x77/0x170 [ 160.777735] Code: 00 e8 fd 91 ed ff e8 b8 73 ed ff 41 83 7d 18 19 74 6e 41 8b 45 24 49 8b bd f8 00 00 00 31 db 85 c0 74 48 48 63 c3 48 8d 04 c7 <48> 8b 28 48 85 ed 74 30 48 8b 7d 18 48 85 ff 74 05 e8 b3 52 fa ff [ 160.796777] RSP: 0018:ffffc9000ee1fe38 EFLAGS: 00010202 [ 160.802086] RAX: ffffc8fc2c001000 RBX: 0000000080000000 RCX: 0000000000000024 [ 160.809331] RDX: 0000000000000000 RSI: 0000000000000024 RDI: ffffc9002c001000 [ 160.816576] RBP: 0000000000000000 R08: 0000000000000023 R09: 0000000000000001 [ 160.823823] R10: 0000000000000001 R11: 00000000000ee6b2 R12: dead000000000122 [ 160.831066] R13: ffff88810c928e00 R14: ffff8881002df405 R15: 0000000000000000 [ 160.838310] FS: 0000000000000000(0000) GS:ffff8897e0c40000(0000) knlGS:0000000000000000 [ 160.846528] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.852357] CR2: ffffc8fc2c001000 CR3: 0000000005c32006 CR4: 00000000007726f0 [ 160.859604] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.866847] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.874092] PKRU: 55555554 [ 160.876847] Call Trace: [ 160.879338] <TASK> [ 160.881477] ? __die+0x20/0x60 [ 160.884586] ? page_fault_oops+0x15a/0x450 [ 160.888746] ? search_extable+0x22/0x30 [ 160.892647] ? search_bpf_extables+0x5f/0x80 [ 160.896988] ? exc_page_fault+0xa9/0x140 [ 160.900973] ? asm_exc_page_fault+0x22/0x30 [ 160.905232] ? dev_map_free+0x77/0x170 [ 160.909043] ? dev_map_free+0x58/0x170 [ 160.912857] bpf_map_free_deferred+0x51/0x90 [ 160.917196] process_one_work+0x142/0x370 [ 160.921272] worker_thread+0x29e/0x3b0 [ 160.925082] ? rescuer_thread+0x4b0/0x4b0 [ 160.929157] kthread+0xd4/0x110 [ 160.932355] ? kthread_park+0x80/0x80 [ 160.936079] ret_from_fork+0x2d/0x50 [ 160.943396] ? kthread_park+0x80/0x80 [ 160.950803] ret_from_fork_asm+0x11/0x20 [ 160.958482] </TASK> Fixes: 546ac1f ("bpf: add devmap, a map for storing net device references") CC: [email protected] Reported-by: Jordy Zomer <[email protected]> Suggested-by: Jordy Zomer <[email protected]> Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Acked-by: John Fastabend <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 32cd3db upstream. Jordy says: " In the xsk_map_delete_elem function an unsigned integer (map->max_entries) is compared with a user-controlled signed integer (k). Due to implicit type conversion, a large unsigned value for map->max_entries can bypass the intended bounds check: if (k >= map->max_entries) return -EINVAL; This allows k to hold a negative value (between -2147483648 and -2), which is then used as an array index in m->xsk_map[k], which results in an out-of-bounds access. spin_lock_bh(&m->lock); map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write if (old_xs) xsk_map_sock_delete(old_xs, map_entry); spin_unlock_bh(&m->lock); The xchg operation can then be used to cause an out-of-bounds write. Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead to further memory corruption. " It indeed results in following splat: [76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108 [76612.904330] #PF: supervisor write access in kernel mode [76612.909639] #PF: error_code(0x0002) - not-present page [76612.914855] PGD 0 P4D 0 [76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP [76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ torvalds#470 [76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60 [76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31 [76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246 [76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000 [76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000 [76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007 [76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8 [76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0 [76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000 [76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0 [76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [76613.041086] PKRU: 55555554 [76613.043842] Call Trace: [76613.046331] <TASK> [76613.048468] ? __die+0x20/0x60 [76613.051581] ? page_fault_oops+0x15a/0x450 [76613.055747] ? search_extable+0x22/0x30 [76613.059649] ? search_bpf_extables+0x5f/0x80 [76613.063988] ? exc_page_fault+0xa9/0x140 [76613.067975] ? asm_exc_page_fault+0x22/0x30 [76613.072229] ? xsk_map_delete_elem+0x2d/0x60 [76613.076573] ? xsk_map_delete_elem+0x23/0x60 [76613.080914] __sys_bpf+0x19b7/0x23c0 [76613.084555] __x64_sys_bpf+0x1a/0x20 [76613.088194] do_syscall_64+0x37/0xb0 [76613.091832] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [76613.096962] RIP: 0033:0x7f80b6d1e88d [76613.100592] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [76613.119631] RSP: 002b:00007ffd1ae0ac68 EFLAGS: 00000206 ORIG_RAX: 0000000000000141 [76613.131330] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f80b6d1e88d [76613.142632] RDX: 0000000000000098 RSI: 00007ffd1ae0ad20 RDI: 0000000000000003 [76613.153967] RBP: 00007ffd1ae0adc0 R08: 0000000000000000 R09: 0000000000000000 [76613.166030] R10: 00007f80b6f77040 R11: 0000000000000206 R12: 00007ffd1ae0aed8 [76613.177130] R13: 000055ddf42ce1e9 R14: 000055ddf42d0d98 R15: 00007f80b6fab040 [76613.188129] </TASK> Fix this by simply changing key type from int to u32. Fixes: fbfc504 ("bpf: introduce new bpf AF_XDP map type BPF_MAP_TYPE_XSKMAP") CC: [email protected] Reported-by: Jordy Zomer <[email protected]> Suggested-by: Jordy Zomer <[email protected]> Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Acked-by: John Fastabend <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b9e9ed9 ] For htab of maps, when the map is removed from the htab, it may hold the last reference of the map. bpf_map_fd_put_ptr() will invoke bpf_map_free_id() to free the id of the removed map element. However, bpf_map_fd_put_ptr() is invoked while holding a bucket lock (raw_spin_lock_t), and bpf_map_free_id() attempts to acquire map_idr_lock (spinlock_t), triggering the following lockdep warning: ============================= [ BUG: Invalid wait context ] 6.11.0-rc4+ torvalds#49 Not tainted ----------------------------- test_maps/4881 is trying to lock: ffffffff84884578 (map_idr_lock){+...}-{3:3}, at: bpf_map_free_id.part.0+0x21/0x70 other info that might help us debug this: context-{5:5} 2 locks held by test_maps/4881: #0: ffffffff846caf60 (rcu_read_lock){....}-{1:3}, at: bpf_fd_htab_map_update_elem+0xf9/0x270 #1: ffff888149ced148 (&htab->lockdep_key#2){....}-{2:2}, at: htab_map_update_elem+0x178/0xa80 stack backtrace: CPU: 0 UID: 0 PID: 4881 Comm: test_maps Not tainted 6.11.0-rc4+ torvalds#49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... Call Trace: <TASK> dump_stack_lvl+0x6e/0xb0 dump_stack+0x10/0x20 __lock_acquire+0x73e/0x36c0 lock_acquire+0x182/0x450 _raw_spin_lock_irqsave+0x43/0x70 bpf_map_free_id.part.0+0x21/0x70 bpf_map_put+0xcf/0x110 bpf_map_fd_put_ptr+0x9a/0xb0 free_htab_elem+0x69/0xe0 htab_map_update_elem+0x50f/0xa80 bpf_fd_htab_map_update_elem+0x131/0x270 htab_map_update_elem+0x50f/0xa80 bpf_fd_htab_map_update_elem+0x131/0x270 bpf_map_update_value+0x266/0x380 __sys_bpf+0x21bb/0x36b0 __x64_sys_bpf+0x45/0x60 x64_sys_call+0x1b2a/0x20d0 do_syscall_64+0x5d/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e One way to fix the lockdep warning is using raw_spinlock_t for map_idr_lock as well. However, bpf_map_alloc_id() invokes idr_alloc_cyclic() after acquiring map_idr_lock, it will trigger a similar lockdep warning because the slab's lock (s->cpu_slab->lock) is still a spinlock. Instead of changing map_idr_lock's type, fix the issue by invoking htab_put_fd_value() after htab_unlock_bucket(). However, only deferring the invocation of htab_put_fd_value() is not enough, because the old map pointers in htab of maps can not be saved during batched deletion. Therefore, also defer the invocation of free_htab_elem(), so these to-be-freed elements could be linked together similar to lru map. There are four callers for ->map_fd_put_ptr: (1) alloc_htab_elem() (through htab_put_fd_value()) It invokes ->map_fd_put_ptr() under a raw_spinlock_t. The invocation of htab_put_fd_value() can not simply move after htab_unlock_bucket(), because the old element has already been stashed in htab->extra_elems. It may be reused immediately after htab_unlock_bucket() and the invocation of htab_put_fd_value() after htab_unlock_bucket() may release the newly-added element incorrectly. Therefore, saving the map pointer of the old element for htab of maps before unlocking the bucket and releasing the map_ptr after unlock. Beside the map pointer in the old element, should do the same thing for the special fields in the old element as well. (2) free_htab_elem() (through htab_put_fd_value()) Its caller includes __htab_map_lookup_and_delete_elem(), htab_map_delete_elem() and __htab_map_lookup_and_delete_batch(). For htab_map_delete_elem(), simply invoke free_htab_elem() after htab_unlock_bucket(). For __htab_map_lookup_and_delete_batch(), just like lru map, linking the to-be-freed element into node_to_free list and invoking free_htab_elem() for these element after unlock. It is safe to reuse batch_flink as the link for node_to_free, because these elements have been removed from the hash llist. Because htab of maps doesn't support lookup_and_delete operation, __htab_map_lookup_and_delete_elem() doesn't have the problem, so kept it as is. (3) fd_htab_map_free() It invokes ->map_fd_put_ptr without raw_spinlock_t. (4) bpf_fd_htab_map_update_elem() It invokes ->map_fd_put_ptr without raw_spinlock_t. After moving free_htab_elem() outside htab bucket lock scope, using pcpu_freelist_push() instead of __pcpu_freelist_push() to disable the irq before freeing elements, and protecting the invocations of bpf_mem_cache_free() with migrate_{disable|enable} pair. Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…ode. [ Upstream commit d5c367e ] creating a large files during checkpoint disable until it runs out of space and then delete it, then remount to enable checkpoint again, and then unmount the filesystem triggers the f2fs_bug_on as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/inode.c:896! CPU: 2 UID: 0 PID: 1286 Comm: umount Not tainted 6.11.0-rc7-dirty torvalds#360 Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:f2fs_evict_inode+0x58c/0x610 Call Trace: __die_body+0x15/0x60 die+0x33/0x50 do_trap+0x10a/0x120 f2fs_evict_inode+0x58c/0x610 do_error_trap+0x60/0x80 f2fs_evict_inode+0x58c/0x610 exc_invalid_op+0x53/0x60 f2fs_evict_inode+0x58c/0x610 asm_exc_invalid_op+0x16/0x20 f2fs_evict_inode+0x58c/0x610 evict+0x101/0x260 dispose_list+0x30/0x50 evict_inodes+0x140/0x190 generic_shutdown_super+0x2f/0x150 kill_block_super+0x11/0x40 kill_f2fs_super+0x7d/0x140 deactivate_locked_super+0x2a/0x70 cleanup_mnt+0xb3/0x140 task_work_run+0x61/0x90 The root cause is: creating large files during disable checkpoint period results in not enough free segments, so when writing back root inode will failed in f2fs_enable_checkpoint. When umount the file system after enabling checkpoint, the root inode is dirty in f2fs_evict_inode function, which triggers BUG_ON. The steps to reproduce are as follows: dd if=/dev/zero of=f2fs.img bs=1M count=55 mount f2fs.img f2fs_dir -o checkpoint=disable:10% dd if=/dev/zero of=big bs=1M count=50 sync rm big mount -o remount,checkpoint=enable f2fs_dir umount f2fs_dir Let's redirty inode when there is not free segments during checkpoint is disable. Signed-off-by: Qi Han <[email protected]> Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…to avoid deadlock [ Upstream commit 6cf7b65 ] A deadlock may happen since the i3c_master_register() acquires &i3cbus->lock twice. See the log below. Use i3cdev->desc->info instead of calling i3c_device_info() to avoid acquiring the lock twice. v2: - Modified the title and commit message ============================================ WARNING: possible recursive locking detected 6.11.0-mainline -------------------------------------------- init/1 is trying to acquire lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_bus_normaluse_lock but task is already holding lock: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&i3cbus->lock); lock(&i3cbus->lock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by init/1: #0: fcffff809b6798f8 (&dev->mutex){....}-{3:3}, at: __driver_attach #1: f1ffff80a6a40dc0 (&i3cbus->lock){++++}-{3:3}, at: i3c_master_register stack backtrace: CPU: 6 UID: 0 PID: 1 Comm: init Call trace: dump_backtrace+0xfc/0x17c show_stack+0x18/0x28 dump_stack_lvl+0x40/0xc0 dump_stack+0x18/0x24 print_deadlock_bug+0x388/0x390 __lock_acquire+0x18bc/0x32ec lock_acquire+0x134/0x2b0 down_read+0x50/0x19c i3c_bus_normaluse_lock+0x14/0x24 i3c_device_get_info+0x24/0x58 i3c_device_uevent+0x34/0xa4 dev_uevent+0x310/0x384 kobject_uevent_env+0x244/0x414 kobject_uevent+0x14/0x20 device_add+0x278/0x460 device_register+0x20/0x34 i3c_master_register_new_i3c_devs+0x78/0x154 i3c_master_register+0x6a0/0x6d4 mtk_i3c_master_probe+0x3b8/0x4d8 platform_probe+0xa0/0xe0 really_probe+0x114/0x454 __driver_probe_device+0xa0/0x15c driver_probe_device+0x3c/0x1ac __driver_attach+0xc4/0x1f0 bus_for_each_dev+0x104/0x160 driver_attach+0x24/0x34 bus_add_driver+0x14c/0x294 driver_register+0x68/0x104 __platform_driver_register+0x20/0x30 init_module+0x20/0xfe4 do_one_initcall+0x184/0x464 do_init_module+0x58/0x1ec load_module+0xefc/0x10c8 __arm64_sys_finit_module+0x238/0x33c invoke_syscall+0x58/0x10c el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x50/0xac el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1a8/0x1ac Signed-off-by: Defa Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 88fd2b7 ] Commit bab1c29 ("LoongArch: Fix sleeping in atomic context in setup_tlb_handler()") changes the gfp flag from GFP_KERNEL to GFP_ATOMIC for alloc_pages_node(). However, for PREEMPT_RT kernels we can still get a "sleeping in atomic context" error: [ 0.372259] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 [ 0.372266] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 [ 0.372268] preempt_count: 1, expected: 0 [ 0.372270] RCU nest depth: 1, expected: 1 [ 0.372272] 3 locks held by swapper/1/0: [ 0.372274] #0: 900000000c9f5e60 (&pcp->lock){+.+.}-{3:3}, at: get_page_from_freelist+0x524/0x1c60 [ 0.372294] #1: 90000000087013b8 (rcu_read_lock){....}-{1:3}, at: rt_spin_trylock+0x50/0x140 [ 0.372305] #2: 900000047fffd388 (&zone->lock){+.+.}-{3:3}, at: __rmqueue_pcplist+0x30c/0xea0 [ 0.372314] irq event stamp: 0 [ 0.372316] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 0.372322] hardirqs last disabled at (0): [<9000000005947320>] copy_process+0x9c0/0x26e0 [ 0.372329] softirqs last enabled at (0): [<9000000005947320>] copy_process+0x9c0/0x26e0 [ 0.372335] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 0.372341] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.12.0-rc7+ #1891 [ 0.372346] Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0-prebeta9 10/21/2022 [ 0.372349] Stack : 0000000000000089 9000000005a0db9c 90000000071519c8 9000000100388000 [ 0.372486] 900000010038b890 0000000000000000 900000010038b898 9000000007e53788 [ 0.372492] 900000000815bcc8 900000000815bcc0 900000010038b700 0000000000000001 [ 0.372498] 0000000000000001 4b031894b9d6b725 00000000055ec000 9000000100338fc0 [ 0.372503] 00000000000000c4 0000000000000001 000000000000002d 0000000000000003 [ 0.372509] 0000000000000030 0000000000000003 00000000055ec000 0000000000000003 [ 0.372515] 900000000806d000 9000000007e53788 00000000000000b0 0000000000000004 [ 0.372521] 0000000000000000 0000000000000000 900000000c9f5f10 0000000000000000 [ 0.372526] 90000000076f12d8 9000000007e53788 9000000005924778 0000000000000000 [ 0.372532] 00000000000000b0 0000000000000004 0000000000000000 0000000000070000 [ 0.372537] ... [ 0.372540] Call Trace: [ 0.372542] [<9000000005924778>] show_stack+0x38/0x180 [ 0.372548] [<90000000071519c4>] dump_stack_lvl+0x94/0xe4 [ 0.372555] [<900000000599b880>] __might_resched+0x1a0/0x260 [ 0.372561] [<90000000071675cc>] rt_spin_lock+0x4c/0x140 [ 0.372565] [<9000000005cbb768>] __rmqueue_pcplist+0x308/0xea0 [ 0.372570] [<9000000005cbed84>] get_page_from_freelist+0x564/0x1c60 [ 0.372575] [<9000000005cc0d98>] __alloc_pages_noprof+0x218/0x1820 [ 0.372580] [<900000000593b36c>] tlb_init+0x1ac/0x298 [ 0.372585] [<9000000005924b74>] per_cpu_trap_init+0x114/0x140 [ 0.372589] [<9000000005921964>] cpu_probe+0x4e4/0xa60 [ 0.372592] [<9000000005934874>] start_secondary+0x34/0xc0 [ 0.372599] [<900000000715615c>] smpboot_entry+0x64/0x6c This is because in PREEMPT_RT kernels normal spinlocks are replaced by rt spinlocks and rt_spin_lock() will cause sleeping. Fix it by disabling NUMA optimization completely for PREEMPT_RT kernels. Signed-off-by: Huacai Chen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…A in a MM [ Upstream commit 091c1dd ] We currently assume that there is at least one VMA in a MM, which isn't true. So we might end up having find_vma() return NULL, to then de-reference NULL. So properly handle find_vma() returning NULL. This fixes the report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 6021 Comm: syz-executor284 Not tainted 6.12.0-rc7-syzkaller-00187-gf868cd251776 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:migrate_to_node mm/mempolicy.c:1090 [inline] RIP: 0010:do_migrate_pages+0x403/0x6f0 mm/mempolicy.c:1194 Code: ... RSP: 0018:ffffc9000375fd08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffc9000375fd78 RCX: 0000000000000000 RDX: ffff88807e171300 RSI: dffffc0000000000 RDI: ffff88803390c044 RBP: ffff88807e171428 R08: 0000000000000014 R09: fffffbfff2039ef1 R10: ffffffff901cf78f R11: 0000000000000000 R12: 0000000000000003 R13: ffffc9000375fe90 R14: ffffc9000375fe98 R15: ffffc9000375fdf8 FS: 00005555919e1380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555919e1ca8 CR3: 000000007f12a000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> kernel_migrate_pages+0x5b2/0x750 mm/mempolicy.c:1709 __do_sys_migrate_pages mm/mempolicy.c:1727 [inline] __se_sys_migrate_pages mm/mempolicy.c:1723 [inline] __x64_sys_migrate_pages+0x96/0x100 mm/mempolicy.c:1723 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [[email protected]: add unlikely()] Link: https://lkml.kernel.org/r/[email protected] Fixes: 3974388 ("[PATCH] Swap Migration V5: sys_migrate_pages interface") Signed-off-by: David Hildenbrand <[email protected]> Reported-by: [email protected] Closes: https://lore.kernel.org/lkml/[email protected]/T/ Reviewed-by: Liam R. Howlett <[email protected]> Reviewed-by: Christoph Lameter <[email protected]> Cc: Liam R. Howlett <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit b3431a8 upstream. flush_tlb_kernel_range() may use IPIs to flush the TLBs of all the cores, which triggers the following warning when the irqs are disabled: [ 3.455330] WARNING: CPU: 1 PID: 0 at kernel/smp.c:815 smp_call_function_many_cond+0x452/0x520 [ 3.456647] Modules linked in: [ 3.457218] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 6.12.0-rc7-00010-g91d3de7240b8 #1 [ 3.457416] Hardware name: QEMU QEMU Virtual Machine, BIOS [ 3.457633] epc : smp_call_function_many_cond+0x452/0x520 [ 3.457736] ra : on_each_cpu_cond_mask+0x1e/0x30 [ 3.457786] epc : ffffffff800b669a ra : ffffffff800b67c2 sp : ff2000000000bb50 [ 3.457824] gp : ffffffff815212b8 tp : ff6000008014f080 t0 : 000000000000003f [ 3.457859] t1 : ffffffff815221e0 t2 : 000000000000000f s0 : ff2000000000bc10 [ 3.457920] s1 : 0000000000000040 a0 : ffffffff815221e0 a1 : 0000000000000001 [ 3.457953] a2 : 0000000000010000 a3 : 0000000000000003 a4 : 0000000000000000 [ 3.458006] a5 : 0000000000000000 a6 : ffffffffffffffff a7 : 0000000000000000 [ 3.458042] s2 : ffffffff815223be s3 : 00fffffffffff000 s4 : ff600001ffe38fc0 [ 3.458076] s5 : ff600001ff950d00 s6 : 0000000200000120 s7 : 0000000000000001 [ 3.458109] s8 : 0000000000000001 s9 : ff60000080841ef0 s10: 0000000000000001 [ 3.458141] s11: ffffffff81524812 t3 : 0000000000000001 t4 : ff60000080092bc0 [ 3.458172] t5 : 0000000000000000 t6 : ff200000000236d0 [ 3.458203] status: 0000000200000100 badaddr: ffffffff800b669a cause: 0000000000000003 [ 3.458373] [<ffffffff800b669a>] smp_call_function_many_cond+0x452/0x520 [ 3.458593] [<ffffffff800b67c2>] on_each_cpu_cond_mask+0x1e/0x30 [ 3.458625] [<ffffffff8000e4ca>] __flush_tlb_range+0x118/0x1ca [ 3.458656] [<ffffffff8000e6b2>] flush_tlb_kernel_range+0x1e/0x26 [ 3.458683] [<ffffffff801ea56a>] kfence_protect+0xc0/0xce [ 3.458717] [<ffffffff801e9456>] kfence_guarded_free+0xc6/0x1c0 [ 3.458742] [<ffffffff801e9d6c>] __kfence_free+0x62/0xc6 [ 3.458764] [<ffffffff801c57d8>] kfree+0x106/0x32c [ 3.458786] [<ffffffff80588cf2>] detach_buf_split+0x188/0x1a8 [ 3.458816] [<ffffffff8058708c>] virtqueue_get_buf_ctx+0xb6/0x1f6 [ 3.458839] [<ffffffff805871da>] virtqueue_get_buf+0xe/0x16 [ 3.458880] [<ffffffff80613d6a>] virtblk_done+0x5c/0xe2 [ 3.458908] [<ffffffff8058766e>] vring_interrupt+0x6a/0x74 [ 3.458930] [<ffffffff800747d8>] __handle_irq_event_percpu+0x7c/0xe2 [ 3.458956] [<ffffffff800748f0>] handle_irq_event+0x3c/0x86 [ 3.458978] [<ffffffff800786cc>] handle_simple_irq+0x9e/0xbe [ 3.459004] [<ffffffff80073934>] generic_handle_domain_irq+0x1c/0x2a [ 3.459027] [<ffffffff804bf87c>] imsic_handle_irq+0xba/0x120 [ 3.459056] [<ffffffff80073934>] generic_handle_domain_irq+0x1c/0x2a [ 3.459080] [<ffffffff804bdb76>] riscv_intc_aia_irq+0x24/0x34 [ 3.459103] [<ffffffff809d0452>] handle_riscv_irq+0x2e/0x4c [ 3.459133] [<ffffffff809d923e>] call_on_irq_stack+0x32/0x40 So only flush the local TLB and let the lazy kfence page fault handling deal with the faults which could happen when a core has an old protected pte version cached in its TLB. That leads to potential inaccuracies which can be tolerated when using kfence. Fixes: 47513f2 ("riscv: Enable KFENCE for riscv64") Signed-off-by: Alexandre Ghiti <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit b04d86f ] syzbot found [1] that after blamed commit, ub->ubsock->sk was NULL when attempting the atomic_dec() : atomic_dec(&tipc_net(sock_net(ub->ubsock->sk))->wq_count); Fix this by caching the tipc_net pointer. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 0 UID: 0 PID: 5896 Comm: kworker/0:3 Not tainted 6.13.0-rc1-next-20241203-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events cleanup_bearer RIP: 0010:read_pnet include/net/net_namespace.h:387 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:cleanup_bearer+0x1f7/0x280 net/tipc/udp_media.c:820 Code: 18 48 89 d8 48 c1 e8 03 42 80 3c 28 00 74 08 48 89 df e8 3c f7 99 f6 48 8b 1b 48 83 c3 30 e8 f0 e4 60 00 48 89 d8 48 c1 e8 03 <42> 80 3c 28 00 74 08 48 89 df e8 1a f7 99 f6 49 83 c7 e8 48 8b 1b RSP: 0018:ffffc9000410fb70 EFLAGS: 00010206 RAX: 0000000000000006 RBX: 0000000000000030 RCX: ffff88802fe45a00 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffc9000410f900 RBP: ffff88807e1f0908 R08: ffffc9000410f907 R09: 1ffff92000821f20 R10: dffffc0000000000 R11: fffff52000821f21 R12: ffff888031d19980 R13: dffffc0000000000 R14: dffffc0000000000 R15: ffff88807e1f0918 FS: 0000000000000000(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ca050b000 CR3: 0000000031c0c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 6a2fa13 ("tipc: Fix use-after-free of kernel socket in cleanup_bearer().") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/T/#u Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a6d75ec ] It is unclear if net/lapb code is supposed to be ready for 8021q. We can at least avoid crashes like the following : skbuff: skb_under_panic: text:ffffffff8aabe1f6 len:24 put:20 head:ffff88802824a400 data:ffff88802824a3fe tail:0x16 end:0x140 dev:nr0.2 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5508 Comm: dhcpcd Not tainted 6.12.0-rc7-syzkaller-00144-g66418447d27b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 2e 9e 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 1a 6f 37 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90002ddf638 EFLAGS: 00010282 RAX: 0000000000000086 RBX: dffffc0000000000 RCX: 7a24750e538ff600 RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff888034a86650 R08: ffffffff8174b13c R09: 1ffff920005bbe60 R10: dffffc0000000000 R11: fffff520005bbe61 R12: 0000000000000140 R13: ffff88802824a400 R14: ffff88802824a3fe R15: 0000000000000016 FS: 00007f2a5990d740(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c2631fd CR3: 0000000029504000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 nr_header+0x36/0x320 net/netrom/nr_dev.c:69 dev_hard_header include/linux/netdevice.h:3148 [inline] vlan_dev_hard_header+0x359/0x480 net/8021q/vlan_dev.c:83 dev_hard_header include/linux/netdevice.h:3148 [inline] lapbeth_data_transmit+0x1f6/0x2a0 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x91/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x168/0x1f0 net/lapb/lapb_out.c:149 lapb_establish_data_link+0x84/0xd0 lapb_device_event+0x4e0/0x670 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 __dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:8922 devinet_ioctl+0xa4e/0x1aa0 net/ipv4/devinet.c:1188 inet_ioctl+0x3d7/0x4f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x158/0x460 net/socket.c:1227 sock_ioctl+0x626/0x8e0 net/socket.c:1346 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/T/#u Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b548f5e ] hci_devcd_append may lead to the release of the skb, so it cannot be accessed once it is called. ================================================================== BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk] Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82 CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024 Workqueue: events btusb_rx_work [btusb] Call Trace: <TASK> dump_stack_lvl+0xfd/0x150 print_report+0x131/0x780 kasan_report+0x177/0x1c0 btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01] btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 82: stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80 __kasan_slab_alloc+0x4e/0x60 kmem_cache_alloc+0x19f/0x360 skb_clone+0x132/0xf70 btusb_recv_acl_mtk+0x104/0x1a0 [btusb] btusb_rx_work+0x9e/0xe0 [btusb] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 Freed by task 1733: stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80 kasan_save_free_info+0x28/0xb0 ____kasan_slab_free+0xfd/0x170 kmem_cache_free+0x183/0x3f0 hci_devcd_rx+0x91a/0x2060 [bluetooth] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 The buggy address belongs to the object at ffff888033cfab40 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 112 bytes inside of freed 232-byte region [ffff888033cfab40, ffff888033cfac28) The buggy address belongs to the physical page: page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0x4000000000000840(slab|head|zone=1) page_type: 0xffffffff() raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001 raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Check if we need to call hci_devcd_complete before calling hci_devcd_append. That requires that we check data->cd_info.cnt >= MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we increment data->cd_info.cnt only once the call to hci_devcd_append succeeds. Fixes: 0b70151 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support") Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2b33eb8 ] link down work may be scheduled before lgr freed but execute after lgr freed, which may result in crash. So it is need to hold a reference before shedule link down work, and put the reference after work executed or canceled. The relevant crash call stack as follows: list_del corruption. prev->next should be ffffb638c9c0fe20, but was 0000000000000000 ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:51! invalid opcode: 0000 [#1] SMP NOPTI CPU: 6 PID: 978112 Comm: kworker/6:119 Kdump: loaded Tainted: G #1 Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 2221b89 04/01/2014 Workqueue: events smc_link_down_work [smc] RIP: 0010:__list_del_entry_valid.cold+0x31/0x47 RSP: 0018:ffffb638c9c0fdd8 EFLAGS: 00010086 RAX: 0000000000000054 RBX: ffff942fb75e5128 RCX: 0000000000000000 RDX: ffff943520930aa0 RSI: ffff94352091fc80 RDI: ffff94352091fc80 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffb638c9c0fc38 R10: ffffb638c9c0fc30 R11: ffffffffa015eb28 R12: 0000000000000002 R13: ffffb638c9c0fe20 R14: 0000000000000001 R15: ffff942f9cd051c0 FS: 0000000000000000(0000) GS:ffff943520900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4f25214000 CR3: 000000025fbae004 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: rwsem_down_write_slowpath+0x17e/0x470 smc_link_down_work+0x3c/0x60 [smc] process_one_work+0x1ac/0x350 worker_thread+0x49/0x2f0 ? rescuer_thread+0x360/0x360 kthread+0x118/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x1f/0x30 Fixes: 541afa1 ("net/smc: add smcr_port_err() and smcr_link_down() processing") Signed-off-by: Guangguan Wang <[email protected]> Reviewed-by: Tony Lu <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 429fde2 upstream. syzbot reported the following crash [1] Issue came with the blamed commit. Instead of going through all the iov components, we keep using the first one and end up with a malformed skb. [1] kernel BUG at net/core/skbuff.c:2849 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848 Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293 RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00 RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000 RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50 R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80 FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284 tipc_aead_decrypt net/tipc/crypto.c:894 [inline] tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844 tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109 tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668 __netif_receive_skb_list_ptype net/core/dev.c:5720 [inline] __netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905 gro_normal_list include/net/gro.h:515 [inline] napi_complete_done+0x2b5/0x870 net/core/dev.c:6256 napi_complete include/linux/netdevice.h:567 [inline] tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982 tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057 do_iter_readv_writev+0x600/0x880 vfs_writev+0x376/0xba0 fs/read_write.c:1050 do_writev+0x1b6/0x360 fs/read_write.c:1096 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: de4f5fe ("iov_iter: add iter_iovec() helper") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/T/#u Cc: [email protected] Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Joe Damato <[email protected]> Reviewed-by: Jens Axboe <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 07a756a upstream. If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is fully initialized, we can hit the panic below: hv_utils: Registering HyperV Utility Driver hv_vmbus: registering driver hv_utils ... BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1 RIP: 0010:hv_pkt_iter_first+0x12/0xd0 Call Trace: ... vmbus_recvpacket hv_kvp_onchannelcallback vmbus_on_event tasklet_action_common tasklet_action handle_softirqs irq_exit_rcu sysvec_hyperv_stimer0 </IRQ> <TASK> asm_sysvec_hyperv_stimer0 ... kvp_register_done hvt_op_read vfs_read ksys_read __x64_sys_read This can happen because the KVP/VSS channel callback can be invoked even before the channel is fully opened: 1) as soon as hv_kvp_init() -> hvutil_transport_init() creates /dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and register itself to the driver by writing a message KVP_OP_REGISTER1 to the file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and reading the file for the driver's response, which is handled by hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done(). 2) the problem with kvp_register_done() is that it can cause the channel callback to be called even before the channel is fully opened, and when the channel callback is starting to run, util_probe()-> vmbus_open() may have not initialized the ringbuffer yet, so the callback can hit the panic of NULL pointer dereference. To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in __vmbus_open(), just before the first hv_ringbuffer_init(), and then we unload and reload the driver hv_utils, and run the daemon manually within the 10 seconds. Fix the panic by reordering the steps in util_probe() so the char dev entry used by the KVP or VSS daemon is not created until after vmbus_open() has completed. This reordering prevents the race condition from happening. Reported-by: Dexuan Cui <[email protected]> Fixes: e0fa3e5 ("Drivers: hv: utils: fix a race on userspace daemons registration") Cc: [email protected] Signed-off-by: Michael Kelley <[email protected]> Acked-by: Wei Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]> Message-ID: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 3e5e4a8 ] When removing kernel modules by: rmmod rtw88_8723cs rtw88_8703b rtw88_8723x rtw88_sdio rtw88_core Driver uses skb_queue_purge() to purge TX skb, but not report tx status causing "Have pending ack frames!" warning. Use ieee80211_purge_tx_queue() to correct this. Since ieee80211_purge_tx_queue() doesn't take locks, to prevent racing between TX work and purge TX queue, flush and destroy TX work in advance. wlan0: deauthenticating from aa:f5:fd:60:4c:a8 by local choice (Reason: 3=DEAUTH_LEAVING) ------------[ cut here ]------------ Have pending ack frames! WARNING: CPU: 3 PID: 9232 at net/mac80211/main.c:1691 ieee80211_free_ack_frame+0x5c/0x90 [mac80211] CPU: 3 PID: 9232 Comm: rmmod Tainted: G C 6.10.1-200.fc40.aarch64 #1 Hardware name: pine64 Pine64 PinePhone Braveheart (1.1)/Pine64 PinePhone Braveheart (1.1), BIOS 2024.01 01/01/2024 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ieee80211_free_ack_frame+0x5c/0x90 [mac80211] lr : ieee80211_free_ack_frame+0x5c/0x90 [mac80211] sp : ffff80008c1b37b0 x29: ffff80008c1b37b0 x28: ffff000003be8000 x27: 0000000000000000 x26: 0000000000000000 x25: ffff000003dc14b8 x24: ffff80008c1b37d0 x23: ffff000000ff9f80 x22: 0000000000000000 x21: 000000007fffffff x20: ffff80007c7e93d8 x19: ffff00006e66f400 x18: 0000000000000000 x17: ffff7ffffd2b3000 x16: ffff800083fc0000 x15: 0000000000000000 x14: 0000000000000000 x13: 2173656d61726620 x12: 6b636120676e6964 x11: 0000000000000000 x10: 000000000000005d x9 : ffff8000802af2b0 x8 : ffff80008c1b3430 x7 : 0000000000000001 x6 : 0000000000000001 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000003be8000 Call trace: ieee80211_free_ack_frame+0x5c/0x90 [mac80211] idr_for_each+0x74/0x110 ieee80211_free_hw+0x44/0xe8 [mac80211] rtw_sdio_remove+0x9c/0xc0 [rtw88_sdio] sdio_bus_remove+0x44/0x180 device_remove+0x54/0x90 device_release_driver_internal+0x1d4/0x238 driver_detach+0x54/0xc0 bus_remove_driver+0x78/0x108 driver_unregister+0x38/0x78 sdio_unregister_driver+0x2c/0x40 rtw_8723cs_driver_exit+0x18/0x1000 [rtw88_8723cs] __do_sys_delete_module.isra.0+0x190/0x338 __arm64_sys_delete_module+0x1c/0x30 invoke_syscall+0x74/0x100 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x3c/0x158 el0t_64_sync_handler+0x120/0x138 el0t_64_sync+0x194/0x198 ---[ end trace 0000000000000000 ]--- Reported-by: Peter Robinson <[email protected]> Closes: https://lore.kernel.org/linux-wireless/CALeDE9OAa56KMzgknaCD3quOgYuEHFx9_hcT=OFgmMAb+8MPyA@mail.gmail.com/ Tested-by: Ping-Ke Shih <[email protected]> # 8723DU Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 8fac326 ] When I try to manually set bitrates: iw wlan0 set bitrates legacy-2.4 1 I get sleeping from invalid context error, see below. Fix that by switching to use recently introduced ieee80211_iterate_stations_mtx(). Do note that WCN6855 firmware is still crashing, I'm not sure if that firmware even supports bitrate WMI commands and should we consider disabling ath12k_mac_op_set_bitrate_mask() for WCN6855? But that's for another patch. BUG: sleeping function called from invalid context at drivers/net/wireless/ath/ath12k/wmi.c:420 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 2236, name: iw preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 3 locks held by iw/2236: #0: ffffffffabc6f1d8 (cb_lock){++++}-{3:3}, at: genl_rcv+0x14/0x40 #1: ffff888138410810 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: nl80211_pre_doit+0x54d/0x800 [cfg80211] #2: ffffffffab2cfaa0 (rcu_read_lock){....}-{1:2}, at: ieee80211_iterate_stations_atomic+0x2f/0x200 [mac80211] CPU: 3 UID: 0 PID: 2236 Comm: iw Not tainted 6.11.0-rc7-wt-ath+ #1772 Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 Call Trace: <TASK> dump_stack_lvl+0xa4/0xe0 dump_stack+0x10/0x20 __might_resched+0x363/0x5a0 ? __alloc_skb+0x165/0x340 __might_sleep+0xad/0x160 ath12k_wmi_cmd_send+0xb1/0x3d0 [ath12k] ? ath12k_wmi_init_wcn7850+0xa40/0xa40 [ath12k] ? __netdev_alloc_skb+0x45/0x7b0 ? __asan_memset+0x39/0x40 ? ath12k_wmi_alloc_skb+0xf0/0x150 [ath12k] ? reacquire_held_locks+0x4d0/0x4d0 ath12k_wmi_set_peer_param+0x340/0x5b0 [ath12k] ath12k_mac_disable_peer_fixed_rate+0xa3/0x110 [ath12k] ? ath12k_mac_vdev_stop+0x4f0/0x4f0 [ath12k] ieee80211_iterate_stations_atomic+0xd4/0x200 [mac80211] ath12k_mac_op_set_bitrate_mask+0x5d2/0x1080 [ath12k] ? ath12k_mac_vif_chan+0x320/0x320 [ath12k] drv_set_bitrate_mask+0x267/0x470 [mac80211] ieee80211_set_bitrate_mask+0x4cc/0x8a0 [mac80211] ? __this_cpu_preempt_check+0x13/0x20 nl80211_set_tx_bitrate_mask+0x2bc/0x530 [cfg80211] ? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211] ? trace_contention_end+0xef/0x140 ? rtnl_unlock+0x9/0x10 ? nl80211_pre_doit+0x557/0x800 [cfg80211] genl_family_rcv_msg_doit+0x1f0/0x2e0 ? genl_family_rcv_msg_attrs_parse.isra.0+0x250/0x250 ? ns_capable+0x57/0xd0 genl_family_rcv_msg+0x34c/0x600 ? genl_family_rcv_msg_dumpit+0x310/0x310 ? __lock_acquire+0xc62/0x1de0 ? he_set_mcs_mask.isra.0+0x8d0/0x8d0 [cfg80211] ? nl80211_parse_tx_bitrate_mask+0x2320/0x2320 [cfg80211] ? cfg80211_external_auth_request+0x690/0x690 [cfg80211] genl_rcv_msg+0xa0/0x130 netlink_rcv_skb+0x14c/0x400 ? genl_family_rcv_msg+0x600/0x600 ? netlink_ack+0xd70/0xd70 ? rwsem_optimistic_spin+0x4f0/0x4f0 ? genl_rcv+0x14/0x40 ? down_read_killable+0x580/0x580 ? netlink_deliver_tap+0x13e/0x350 ? __this_cpu_preempt_check+0x13/0x20 genl_rcv+0x23/0x40 netlink_unicast+0x45e/0x790 ? netlink_attachskb+0x7f0/0x7f0 netlink_sendmsg+0x7eb/0xdb0 ? netlink_unicast+0x790/0x790 ? __this_cpu_preempt_check+0x13/0x20 ? selinux_socket_sendmsg+0x31/0x40 ? netlink_unicast+0x790/0x790 __sock_sendmsg+0xc9/0x160 ____sys_sendmsg+0x620/0x990 ? kernel_sendmsg+0x30/0x30 ? __copy_msghdr+0x410/0x410 ? __kasan_check_read+0x11/0x20 ? mark_lock+0xe6/0x1470 ___sys_sendmsg+0xe9/0x170 ? copy_msghdr_from_user+0x120/0x120 ? __lock_acquire+0xc62/0x1de0 ? do_fault_around+0x2c6/0x4e0 ? do_user_addr_fault+0x8c1/0xde0 ? reacquire_held_locks+0x220/0x4d0 ? do_user_addr_fault+0x8c1/0xde0 ? __kasan_check_read+0x11/0x20 ? __fdget+0x4e/0x1d0 ? sockfd_lookup_light+0x1a/0x170 __sys_sendmsg+0xd2/0x180 ? __sys_sendmsg_sock+0x20/0x20 ? reacquire_held_locks+0x4d0/0x4d0 ? debug_smp_processor_id+0x17/0x20 __x64_sys_sendmsg+0x72/0xb0 ? lockdep_hardirqs_on+0x7d/0x100 x64_sys_call+0x894/0x9f0 do_syscall_64+0x64/0x130 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f230fe04807 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffe996a7ea8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000556f9f9c3390 RCX: 00007f230fe04807 RDX: 0000000000000000 RSI: 00007ffe996a7ee0 RDI: 0000000000000003 RBP: 0000556f9f9c88c0 R08: 0000000000000002 R09: 0000000000000000 R10: 0000556f965ca190 R11: 0000000000000246 R12: 0000556f9f9c8780 R13: 00007ffe996a7ee0 R14: 0000556f9f9c87d0 R15: 0000556f9f9c88c0 </TASK> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 9f564f1 ] For the current debugfs of hisi_sas, after user triggers dump, the driver allocate memory space to save the register information and create debugfs files to display the saved information. In this process, the debugfs files created after each dump. Therefore, when the dump is triggered while the driver is unbind, the following hang occurs: [67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [67840.862947] Mem abort info: [67840.865855] ESR = 0x0000000096000004 [67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits [67840.875125] SET = 0, FnV = 0 [67840.878291] EA = 0, S1PTW = 0 [67840.881545] FSC = 0x04: level 0 translation fault [67840.886528] Data abort info: [67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000 [67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [67841.003628] pc : down_write+0x30/0x98 [67841.007546] lr : start_creating.part.0+0x60/0x198 [67841.012495] sp : ffff8000b979ba20 [67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40 [67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8 [67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18 [67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020 [67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff [67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18 [67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18 [67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9 [67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001 [67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0 [67841.089759] Call trace: [67841.092456] down_write+0x30/0x98 [67841.096017] start_creating.part.0+0x60/0x198 [67841.100613] debugfs_create_dir+0x48/0x1f8 [67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw] [67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw] [67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw] [67841.125115] full_proxy_write+0x68/0xc8 [67841.129175] vfs_write+0xd8/0x3f0 [67841.132708] ksys_write+0x70/0x108 [67841.136317] __arm64_sys_write+0x24/0x38 [67841.140440] invoke_syscall+0x50/0x128 [67841.144385] el0_svc_common.constprop.0+0xc8/0xf0 [67841.149273] do_el0_svc+0x24/0x38 [67841.152773] el0_svc+0x38/0xd8 [67841.156009] el0t_64_sync_handler+0xc0/0xc8 [67841.160361] el0t_64_sync+0x1a4/0x1a8 [67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05) [67841.170443] ---[ end trace 0000000000000000 ]--- To fix this issue, create all directories and files during debugfs initialization. In this way, the driver only needs to allocate memory space to save information each time the user triggers dumping. Signed-off-by: Yihang Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Xingui Yang <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 542ed81 ] Access to genmask field in struct nft_set_ext results in unaligned atomic read: [ 72.130109] Unable to handle kernel paging request at virtual address ffff0000c2bb708c [ 72.131036] Mem abort info: [ 72.131213] ESR = 0x0000000096000021 [ 72.131446] EC = 0x25: DABT (current EL), IL = 32 bits [ 72.132209] SET = 0, FnV = 0 [ 72.133216] EA = 0, S1PTW = 0 [ 72.134080] FSC = 0x21: alignment fault [ 72.135593] Data abort info: [ 72.137194] ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000 [ 72.142351] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 72.145989] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 72.150115] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000237d27000 [ 72.154893] [ffff0000c2bb708c] pgd=0000000000000000, p4d=180000023ffff403, pud=180000023f84b403, pmd=180000023f835403, +pte=0068000102bb7707 [ 72.163021] Internal error: Oops: 0000000096000021 [#1] SMP [...] [ 72.170041] CPU: 7 UID: 0 PID: 54 Comm: kworker/7:0 Tainted: G E 6.13.0-rc3+ #2 [ 72.170509] Tainted: [E]=UNSIGNED_MODULE [ 72.170720] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-stable202302-for-qemu 03/01/2023 [ 72.171192] Workqueue: events_power_efficient nft_rhash_gc [nf_tables] [ 72.171552] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 72.171915] pc : nft_rhash_gc+0x200/0x2d8 [nf_tables] [ 72.172166] lr : nft_rhash_gc+0x128/0x2d8 [nf_tables] [ 72.172546] sp : ffff800081f2bce0 [ 72.172724] x29: ffff800081f2bd40 x28: ffff0000c2bb708c x27: 0000000000000038 [ 72.173078] x26: ffff0000c6780ef0 x25: ffff0000c643df00 x24: ffff0000c6778f78 [ 72.173431] x23: 000000000000001a x22: ffff0000c4b1f000 x21: ffff0000c6780f78 [ 72.173782] x20: ffff0000c2bb70dc x19: ffff0000c2bb7080 x18: 0000000000000000 [ 72.174135] x17: ffff0000c0a4e1c0 x16: 0000000000003000 x15: 0000ac26d173b978 [ 72.174485] x14: ffffffffffffffff x13: 0000000000000030 x12: ffff0000c6780ef0 [ 72.174841] x11: 0000000000000000 x10: ffff800081f2bcf8 x9 : ffff0000c3000000 [ 72.175193] x8 : 00000000000004be x7 : 0000000000000000 x6 : 0000000000000000 [ 72.175544] x5 : 0000000000000040 x4 : ffff0000c3000010 x3 : 0000000000000000 [ 72.175871] x2 : 0000000000003a98 x1 : ffff0000c2bb708c x0 : 0000000000000004 [ 72.176207] Call trace: [ 72.176316] nft_rhash_gc+0x200/0x2d8 [nf_tables] (P) [ 72.176653] process_one_work+0x178/0x3d0 [ 72.176831] worker_thread+0x200/0x3f0 [ 72.176995] kthread+0xe8/0xf8 [ 72.177130] ret_from_fork+0x10/0x20 [ 72.177289] Code: 54fff984 d503201f d2800080 91003261 (f820303f) [ 72.177557] ---[ end trace 0000000000000000 ]--- Align struct nft_set_ext to word size to address this and documentation it. pahole reports that this increases the size of elements for rhash and pipapo in 8 bytes on x86_64. Fixes: 7ffc748 ("netfilter: nft_set_hash: skip duplicated elements pending gc run") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit b06a618 ] Initialize meter_urb array before use in mixer_us16x08.c. CID 1410197: (#1 of 1): Uninitialized scalar variable (UNINIT) uninit_use_in_call: Using uninitialized value *meter_urb when calling get_meter_levels_from_urb. Coverity Link: https://scan7.scan.coverity.com/#/project-view/52849/11354?selectedIssue=1410197 Fixes: d2bb390 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Signed-off-by: Tanya Agarwal <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4f619d5 ] When driver processes the internal state change command, it use an asynchronous thread to process the command operation. If the main thread detects that the task has timed out, the asynchronous thread will panic when executing the completion notification because the main thread completion object has been released. BUG: unable to handle page fault for address: fffffffffffffff8 PGD 1f283a067 P4D 1f283a067 PUD 1f283c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:complete_all+0x3e/0xa0 [...] Call Trace: <TASK> ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x69/0xa0 ? asm_exc_page_fault+0x22/0x30 ? complete_all+0x3e/0xa0 fsm_main_thread+0xa3/0x9c0 [mtk_t7xx (HASH:1400 5)] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0xd8/0x110 ? __pfx_fsm_main_thread+0x10/0x10 [mtk_t7xx (HASH:1400 5)] ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> [...] CR2: fffffffffffffff8 ---[ end trace 0000000000000000 ]--- Use the reference counter to ensure safe release as Sergey suggests: https://lore.kernel.org/all/[email protected]/ Fixes: 13e920d ("net: wwan: t7xx: Add core components") Signed-off-by: Jinjian Song <[email protected]> Acked-by: Sergey Ryazanov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 77ee7a6 ] Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot. Rework vlan_get_tci() to not touch skb at all, so that it can be used from many cpus on the same skb. Add a const qualifier to skb argument. [1] skbuff: skb_under_panic: text:ffffffff8a8da482 len:32 put:14 head:ffff88807a1d5800 data:ffff88807a1d5810 tail:0x14 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 5880 Comm: syz-executor172 Not tainted 6.13.0-rc3-syzkaller-00762-g9268abe611b0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0b 8d 48 c7 c6 9e 6c 26 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 3a 5a 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90003baf5b8 EFLAGS: 00010286 RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 8565c1eec37aa000 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88802616fb50 R08: ffffffff817f0a4c R09: 1ffff92000775e50 R10: dffffc0000000000 R11: fffff52000775e51 R12: 0000000000000140 R13: ffff88807a1d5800 R14: ffff88807a1d5810 R15: 0000000000000014 FS: 00007fa03261f6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd65753000 CR3: 0000000031720000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 vlan_get_tci+0x272/0x550 net/packet/af_packet.c:565 packet_recvmsg+0x13c9/0x1ef0 net/packet/af_packet.c:3616 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1066 ____sys_recvmsg+0x1c6/0x480 net/socket.c:2814 ___sys_recvmsg net/socket.c:2856 [inline] do_recvmmsg+0x426/0xab0 net/socket.c:2951 __sys_recvmmsg net/socket.c:3025 [inline] __do_sys_recvmmsg net/socket.c:3048 [inline] __se_sys_recvmmsg net/socket.c:3041 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3041 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 Fixes: 79eecf6 ("af_packet: Handle outgoing VLAN packets without hardware offloading") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/T/#u Signed-off-by: Eric Dumazet <[email protected]> Cc: Chengen Du <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f91a5b8 ] Blamed commit forgot MSG_PEEK case, allowing a crash [1] as found by syzbot. Rework vlan_get_protocol_dgram() to not touch skb at all, so that it can be used from many cpus on the same skb. Add a const qualifier to skb argument. [1] skbuff: skb_under_panic: text:ffffffff8a8ccd05 len:29 put:14 head:ffff88807fc8e400 data:ffff88807fc8e3f4 tail:0x11 end:0x140 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5892 Comm: syz-executor883 Not tainted 6.13.0-rc4-syzkaller-00054-gd6ef8b40d075 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0b 8d 48 c7 c6 86 d5 25 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 5a 69 79 f7 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc900038d7638 EFLAGS: 00010282 RAX: 0000000000000087 RBX: dffffc0000000000 RCX: 609ffd18ea660600 RDX: 0000000000000000 RSI: 0000000080000000 RDI: 0000000000000000 RBP: ffff88802483c8d0 R08: ffffffff817f0a8c R09: 1ffff9200071ae60 R10: dffffc0000000000 R11: fffff5200071ae61 R12: 0000000000000140 R13: ffff88807fc8e400 R14: ffff88807fc8e3f4 R15: 0000000000000011 FS: 00007fbac5e006c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fbac5e00d58 CR3: 000000001238e000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 vlan_get_protocol_dgram+0x165/0x290 net/packet/af_packet.c:585 packet_recvmsg+0x948/0x1ef0 net/packet/af_packet.c:3552 sock_recvmsg_nosec net/socket.c:1033 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1055 ____sys_recvmsg+0x1c6/0x480 net/socket.c:2803 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x426/0xab0 net/socket.c:2940 __sys_recvmmsg net/socket.c:3014 [inline] __do_sys_recvmmsg net/socket.c:3037 [inline] __se_sys_recvmmsg net/socket.c:3030 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3030 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 79eecf6 ("af_packet: Handle outgoing VLAN packets without hardware offloading") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/T/#u Signed-off-by: Eric Dumazet <[email protected]> Cc: Chengen Du <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4d94f05 ] This reworks hci_cb_list to not use mutex hci_cb_list_lock to avoid bugs like the bellow: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:585 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 5070, name: kworker/u9:2 preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 4 locks held by kworker/u9:2/5070: #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3229 [inline] #0: ffff888015be3948 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_scheduled_works+0x8e0/0x1770 kernel/workqueue.c:3335 #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work kernel/workqueue.c:3230 [inline] #1: ffffc90003b6fd00 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_scheduled_works+0x91b/0x1770 kernel/workqueue.c:3335 #2: ffff8880665d0078 (&hdev->lock){+.+.}-{3:3}, at: hci_le_create_big_complete_evt+0xcf/0xae0 net/bluetooth/hci_event.c:6914 #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:298 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:750 [inline] #3: ffffffff8e132020 (rcu_read_lock){....}-{1:2}, at: hci_le_create_big_complete_evt+0xdb/0xae0 net/bluetooth/hci_event.c:6915 CPU: 0 PID: 5070 Comm: kworker/u9:2 Not tainted 6.8.0-syzkaller-08073-g480e035fc4c7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Workqueue: hci0 hci_rx_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 __might_resched+0x5d4/0x780 kernel/sched/core.c:10187 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0xc1/0xd70 kernel/locking/mutex.c:752 hci_connect_cfm include/net/bluetooth/hci_core.h:2004 [inline] hci_le_create_big_complete_evt+0x3d9/0xae0 net/bluetooth/hci_event.c:6939 hci_event_func net/bluetooth/hci_event.c:7514 [inline] hci_event_packet+0xa53/0x1540 net/bluetooth/hci_event.c:7569 hci_rx_work+0x3e8/0xca0 net/bluetooth/hci_core.c:4171 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0xa00/0x1770 kernel/workqueue.c:3335 worker_thread+0x86d/0xd70 kernel/workqueue.c:3416 kthread+0x2f0/0x390 kernel/kthread.c:388 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 </TASK> Reported-by: [email protected] Tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=2fb0835e0c9cefc34614 Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…nt message commit cddc76b upstream. Address a bug in the kernel that triggers a "sleeping function called from invalid context" warning when /sys/kernel/debug/kmemleak is printed under specific conditions: - CONFIG_PREEMPT_RT=y - Set SELinux as the LSM for the system - Set kptr_restrict to 1 - kmemleak buffer contains at least one item BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 136, name: cat preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 6 locks held by cat/136: #0: ffff32e64bcbf950 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0xb8/0xe30 #1: ffffafe6aaa9dea0 (scan_mutex){+.+.}-{3:3}, at: kmemleak_seq_start+0x34/0x128 #3: ffff32e6546b1cd0 (&object->lock){....}-{2:2}, at: kmemleak_seq_show+0x3c/0x1e0 #4: ffffafe6aa8d8560 (rcu_read_lock){....}-{1:2}, at: has_ns_capability_noaudit+0x8/0x1b0 #5: ffffafe6aabbc0f8 (notif_lock){+.+.}-{2:2}, at: avc_compute_av+0xc4/0x3d0 irq event stamp: 136660 hardirqs last enabled at (136659): [<ffffafe6a80fd7a0>] _raw_spin_unlock_irqrestore+0xa8/0xd8 hardirqs last disabled at (136660): [<ffffafe6a80fd85c>] _raw_spin_lock_irqsave+0x8c/0xb0 softirqs last enabled at (0): [<ffffafe6a5d50b28>] copy_process+0x11d8/0x3df8 softirqs last disabled at (0): [<0000000000000000>] 0x0 Preemption disabled at: [<ffffafe6a6598a4c>] kmemleak_seq_show+0x3c/0x1e0 CPU: 1 UID: 0 PID: 136 Comm: cat Tainted: G E 6.11.0-rt7+ torvalds#34 Tainted: [E]=UNSIGNED_MODULE Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0xa0/0x128 show_stack+0x1c/0x30 dump_stack_lvl+0xe8/0x198 dump_stack+0x18/0x20 rt_spin_lock+0x8c/0x1a8 avc_perm_nonode+0xa0/0x150 cred_has_capability.isra.0+0x118/0x218 selinux_capable+0x50/0x80 security_capable+0x7c/0xd0 has_ns_capability_noaudit+0x94/0x1b0 has_capability_noaudit+0x20/0x30 restricted_pointer+0x21c/0x4b0 pointer+0x298/0x760 vsnprintf+0x330/0xf70 seq_printf+0x178/0x218 print_unreferenced+0x1a4/0x2d0 kmemleak_seq_show+0xd0/0x1e0 seq_read_iter+0x354/0xe30 seq_read+0x250/0x378 full_proxy_read+0xd8/0x148 vfs_read+0x190/0x918 ksys_read+0xf0/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall.constprop.0+0xd4/0x1d8 el0_svc+0x50/0x158 el0t_64_sync+0x17c/0x180 %pS and %pK, in the same back trace line, are redundant, and %pS can void %pK service in certain contexts. %pS alone already provides the necessary information, and if it cannot resolve the symbol, it falls back to printing the raw address voiding the original intent behind the %pK. Additionally, %pK requires a privilege check CAP_SYSLOG enforced through the LSM, which can trigger a "sleeping function called from invalid context" warning under RT_PREEMPT kernels when the check occurs in an atomic context. This issue may also affect other LSMs. This change avoids the unnecessary privilege check and resolves the sleeping function warning without any loss of information. Link: https://lkml.kernel.org/r/[email protected] Fixes: 3a6f33d ("mm/kmemleak: use %pK to display kernel pointers in backtrace") Signed-off-by: Alessandro Carminati <[email protected]> Acked-by: Sebastian Andrzej Siewior <[email protected]> Acked-by: Catalin Marinas <[email protected]> Cc: Clément Léger <[email protected]> Cc: Alessandro Carminati <[email protected]> Cc: Eric Chanudet <[email protected]> Cc: Gabriele Paoloni <[email protected]> Cc: Juri Lelli <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Weißschuh <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

…le_direct_reclaim() commit 6aaced5 upstream. The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 #7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 #8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 #9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped. The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim(). This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior. [[email protected]: coding-style cleanups] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations") Signed-off-by: Seiji Nishikawa <[email protected]> Cc: Mel Gorman <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit cbb26f7 upstream. Syzbot reported the following splat: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 UID: 0 PID: 5836 Comm: sshd Not tainted 6.13.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:_compound_head include/linux/page-flags.h:242 [inline] RIP: 0010:put_page+0x23/0x260 include/linux/mm.h:1552 Code: 90 90 90 90 90 90 90 55 41 57 41 56 53 49 89 fe 48 bd 00 00 00 00 00 fc ff df e8 f8 5e 12 f8 49 8d 5e 08 48 89 d8 48 c1 e8 03 <80> 3c 28 00 74 08 48 89 df e8 8f c7 78 f8 48 8b 1b 48 89 de 48 83 RSP: 0000:ffffc90003916c90 EFLAGS: 00010202 RAX: 0000000000000001 RBX: 0000000000000008 RCX: ffff888030458000 RDX: 0000000000000100 RSI: 0000000000000000 RDI: 0000000000000000 RBP: dffffc0000000000 R08: ffffffff898ca81d R09: 1ffff110054414ac R10: dffffc0000000000 R11: ffffed10054414ad R12: 0000000000000007 R13: ffff88802a20a542 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f34f496e800(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9d6ec9ec28 CR3: 000000004d260000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_page_unref include/linux/skbuff_ref.h:43 [inline] __skb_frag_unref include/linux/skbuff_ref.h:56 [inline] skb_release_data+0x483/0x8a0 net/core/skbuff.c:1119 skb_release_all net/core/skbuff.c:1190 [inline] __kfree_skb+0x55/0x70 net/core/skbuff.c:1204 tcp_clean_rtx_queue net/ipv4/tcp_input.c:3436 [inline] tcp_ack+0x2442/0x6bc0 net/ipv4/tcp_input.c:4032 tcp_rcv_state_process+0x8eb/0x44e0 net/ipv4/tcp_input.c:6805 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1939 tcp_v4_rcv+0x2dc0/0x37f0 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5672 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5785 process_backlog+0x662/0x15b0 net/core/dev.c:6117 __napi_poll+0xcb/0x490 net/core/dev.c:6883 napi_poll net/core/dev.c:6952 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:7074 handle_softirqs+0x2d4/0x9b0 kernel/softirq.c:561 __do_softirq kernel/softirq.c:595 [inline] invoke_softirq kernel/softirq.c:435 [inline] __irq_exit_rcu+0xf7/0x220 kernel/softirq.c:662 irq_exit_rcu+0x9/0x30 kernel/softirq.c:678 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0x57/0xc0 arch/x86/kernel/apic/apic.c:1049 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 RIP: 0033:0x7f34f4519ad5 Code: 85 d2 74 0d 0f 10 02 48 8d 54 24 20 0f 11 44 24 20 64 8b 04 25 18 00 00 00 85 c0 75 27 41 b8 08 00 00 00 b8 0f 01 00 00 0f 05 <48> 3d 00 f0 ff ff 76 75 48 8b 15 24 73 0d 00 f7 d8 64 89 02 48 83 RSP: 002b:00007ffec5b32ce0 EFLAGS: 00000246 RAX: 0000000000000001 RBX: 00000000000668a0 RCX: 00007f34f4519ad5 RDX: 00007ffec5b32d00 RSI: 0000000000000004 RDI: 0000564f4bc6cae0 RBP: 0000564f4bc6b5a0 R08: 0000000000000008 R09: 0000000000000000 R10: 00007ffec5b32de8 R11: 0000000000000246 R12: 0000564f48ea8aa4 R13: 0000000000000001 R14: 0000564f48ea93e8 R15: 00007ffec5b32d68 </TASK> Eric noted a probable shinfo->nr_frags corruption, which indeed occurs. The root cause is a buggy MPTCP option len computation in some circumstances: the ADD_ADDR option should be mutually exclusive with DSS since the blamed commit. Still, mptcp_established_options_add_addr() tries to set the relevant info in mptcp_out_options, if the remaining space is large enough even when DSS is present. Since the ADD_ADDR infos and the DSS share the same union fields, adding first corrupts the latter. In the worst-case scenario, such corruption increases the DSS binary layout, exceeding the computed length and possibly overwriting the skb shared info. Address the issue by enforcing mutual exclusion in mptcp_established_options_add_addr(), too. Cc: [email protected] Reported-by: [email protected] Closes: multipath-tcp/mptcp_net-next#538 Fixes: 1bff1e4 ("mptcp: optimize out option generation") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Matthieu Baerts (NGI0) <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/025d9df8cde3c9a557befc47e9bc08fbbe3476e5.1734771049.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 6aecd91 ] [BUG] Syzbot reported a crash with the following call trace: BTRFS info (device loop0): scrub: started on devid 1 BUG: kernel NULL pointer dereference, address: 0000000000000208 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 106e70067 P4D 106e70067 PUD 107143067 PMD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 UID: 0 PID: 689 Comm: repro Kdump: loaded Tainted: G O 6.13.0-rc4-custom+ torvalds#206 Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:find_first_extent_item+0x26/0x1f0 [btrfs] Call Trace: <TASK> scrub_find_fill_first_stripe+0x13d/0x3b0 [btrfs] scrub_simple_mirror+0x175/0x260 [btrfs] scrub_stripe+0x5d4/0x6c0 [btrfs] scrub_chunk+0xbb/0x170 [btrfs] scrub_enumerate_chunks+0x2f4/0x5f0 [btrfs] btrfs_scrub_dev+0x240/0x600 [btrfs] btrfs_ioctl+0x1dc8/0x2fa0 [btrfs] ? do_sys_openat2+0xa5/0xf0 __x64_sys_ioctl+0x97/0xc0 do_syscall_64+0x4f/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> [CAUSE] The reproducer is using a corrupted image where extent tree root is corrupted, thus forcing to use "rescue=all,ro" mount option to mount the image. Then it triggered a scrub, but since scrub relies on extent tree to find where the data/metadata extents are, scrub_find_fill_first_stripe() relies on an non-empty extent root. But unfortunately scrub_find_fill_first_stripe() doesn't really expect an NULL pointer for extent root, it use extent_root to grab fs_info and triggered a NULL pointer dereference. [FIX] Add an extra check for a valid extent root at the beginning of scrub_find_fill_first_stripe(). The new error path is introduced by 42437a6 ("btrfs: introduce mount option rescue=ignorebadroots"), but that's pretty old, and later commit b979547 ("btrfs: scrub: introduce helper to find and fill sector info for a scrub_stripe") changed how we do scrub. So for kernels older than 6.6, the fix will need manual backport. Reported-by: [email protected] Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 42437a6 ("btrfs: introduce mount option rescue=ignorebadroots") Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 0e2909c ] When cmd_alloc_index(), fails cmd_work_handler() needs to complete ent->slotted before returning early. Otherwise the task which issued the command may hang: mlx5_core 0000:01:00.0: cmd_work_handler:877:(pid 3880418): failed to allocate command entry INFO: task kworker/13:2:4055883 blocked for more than 120 seconds. Not tainted 4.19.90-25.44.v2101.ky10.aarch64 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kworker/13:2 D 0 4055883 2 0x00000228 Workqueue: events mlx5e_tx_dim_work [mlx5_core] Call trace: __switch_to+0xe8/0x150 __schedule+0x2a8/0x9b8 schedule+0x2c/0x88 schedule_timeout+0x204/0x478 wait_for_common+0x154/0x250 wait_for_completion+0x28/0x38 cmd_exec+0x7a0/0xa00 [mlx5_core] mlx5_cmd_exec+0x54/0x80 [mlx5_core] mlx5_core_modify_cq+0x6c/0x80 [mlx5_core] mlx5_core_modify_cq_moderation+0xa0/0xb8 [mlx5_core] mlx5e_tx_dim_work+0x54/0x68 [mlx5_core] process_one_work+0x1b0/0x448 worker_thread+0x54/0x468 kthread+0x134/0x138 ret_from_fork+0x10/0x18 Fixes: 485d65e ("net/mlx5: Add a timeout to acquire the command queue semaphore") Signed-off-by: Chenguang Zhao <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Acked-by: Tariq Toukan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit d38e26e upstream. Using the 'net' structure via 'current' is not recommended for different reasons. First, if the goal is to use it to read or write per-netns data, this is inconsistent with how the "generic" sysctl entries are doing: directly by only using pointers set to the table entry, e.g. table->data. Linked to that, the per-netns data should always be obtained from the table linked to the netns it had been created for, which may not coincide with the reader's or writer's netns. Another reason is that access to current->nsproxy->netns can oops if attempted when current->nsproxy had been dropped when the current task is exiting. This is what syzbot found, when using acct(2): Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 5924 Comm: syz-executor Not tainted 6.13.0-rc5-syzkaller-00004-gccb98ccef0e5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_sys_call_handler+0x403/0x5d0 fs/proc/proc_sysctl.c:601 __kernel_write_iter+0x318/0xa80 fs/read_write.c:612 __kernel_write+0xf6/0x140 fs/read_write.c:632 do_acct_process+0xcb0/0x14a0 kernel/acct.c:539 acct_pin_kill+0x2d/0x100 kernel/acct.c:192 pin_kill+0x194/0x7c0 fs/fs_pin.c:44 mnt_pin_kill+0x61/0x1e0 fs/fs_pin.c:81 cleanup_mnt+0x3ac/0x450 fs/namespace.c:1366 task_work_run+0x14e/0x250 kernel/task_work.c:239 exit_task_work include/linux/task_work.h:43 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 get_signal+0x2576/0x2610 kernel/signal.c:3017 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fee3cb87a6a Code: Unable to access opcode bytes at 0x7fee3cb87a40. RSP: 002b:00007fffcccac688 EFLAGS: 00000202 ORIG_RAX: 0000000000000037 RAX: 0000000000000000 RBX: 00007fffcccac710 RCX: 00007fee3cb87a6a RDX: 0000000000000041 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 00007fffcccac6ac R09: 00007fffcccacac7 R10: 00007fffcccac710 R11: 0000000000000202 R12: 00007fee3cd49500 R13: 00007fffcccac6ac R14: 0000000000000000 R15: 00007fee3cd4b000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 ---------------- Code disassembly (best guess), 1 bytes skipped: 0: 42 80 3c 38 00 cmpb $0x0,(%rax,%r15,1) 5: 0f 85 fe 02 00 00 jne 0x309 b: 4d 8b a4 24 08 09 00 mov 0x908(%r12),%r12 12: 00 13: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 1a: fc ff df 1d: 49 8d 7c 24 28 lea 0x28(%r12),%rdi 22: 48 89 fa mov %rdi,%rdx 25: 48 c1 ea 03 shr $0x3,%rdx * 29: 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction 2d: 0f 85 cc 02 00 00 jne 0x2ff 33: 4d 8b 7c 24 28 mov 0x28(%r12),%r15 38: 48 rex.W 39: 8d .byte 0x8d 3a: 84 24 c8 test %ah,(%rax,%rcx,8) Here with 'net.mptcp.scheduler', the 'net' structure is not really needed, because the table->data already has a pointer to the current scheduler, the only thing needed from the per-netns data. Simply use 'data', instead of getting (most of the time) the same thing, but from a longer and indirect way. Fixes: 6963c50 ("mptcp: only allow set existing scheduler for net.mptcp.scheduler") Cc: [email protected] Reported-by: [email protected] Closes: https://lore.kernel.org/[email protected] Suggested-by: Al Viro <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 6a97f41 upstream. die() can be called in exception handler, and therefore cannot sleep. However, die() takes spinlock_t which can sleep with PREEMPT_RT enabled. That causes the following warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 285, name: mutex preempt_count: 110001, expected: 0 RCU nest depth: 0, expected: 0 CPU: 0 UID: 0 PID: 285 Comm: mutex Not tainted 6.12.0-rc7-00022-ge19049cf7d56-dirty torvalds#234 Hardware name: riscv-virtio,qemu (DT) Call Trace: dump_backtrace+0x1c/0x24 show_stack+0x2c/0x38 dump_stack_lvl+0x5a/0x72 dump_stack+0x14/0x1c __might_resched+0x130/0x13a rt_spin_lock+0x2a/0x5c die+0x24/0x112 do_trap_insn_illegal+0xa0/0xea _new_vmalloc_restore_context_a0+0xcc/0xd8 Oops - illegal instruction [#1] Switch to use raw_spinlock_t, which does not sleep even with PREEMPT_RT enabled. Fixes: 76d2a04 ("RISC-V: Init and Halt Code") Signed-off-by: Nam Cao <[email protected]> Cc: [email protected] Reviewed-by: Sebastian Andrzej Siewior <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

riscv: dts: th1520, lpi4a: add sdhci and rtl8723ds nodes

e71e9ee

RevySR merged commit acd247b into revyos:th1520-v6.6-rc5 Oct 15, 2023

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

riscv: dts: th1520, lpi4a: add sdhci and rtl8723ds nodes #1

riscv: dts: th1520, lpi4a: add sdhci and rtl8723ds nodes #1

chainsx commented Oct 11, 2023

riscv: dts: th1520, lpi4a: add sdhci and rtl8723ds nodes #1

riscv: dts: th1520, lpi4a: add sdhci and rtl8723ds nodes #1

Conversation

chainsx commented Oct 11, 2023