smsc95xx updates for Raspberry Pi #155
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Inspired by implementation in smsc911x.c and smsc9420.c Tested on ARM/pandaboard running android Signed-off-by: Emeric Vigier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
"retval" has to be a signed integer for the error handling to work. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
During init, the device reset is unexpected to complete immediately, so sleep before testing the condition rather than after it. Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Removes unnecessary variables as smsc95xx_write_reg takes its value by parameter. Early versions passed this parameter by reference. Also replace hardcoded interrupt status value with a #define Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
This patch adds additional checks of the values returned by smsc95xx_(read|write)_reg, and wraps their common patterns in macros. Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
This patch fixes an issue on some systems, where after suspend the link is re-established but the ethernet interface does not resume. Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
This patch enables the device to enter its lowest power SUSPEND2 state during system suspend, instead of staying up using full power. Patch updated to not add two pointers to .suspend & .resume. Patch updated to replace BUG_ON with WARN_ON_ONCE and return. Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
This patch enables wake from system suspend on magic packet. Patch updated to replace BUG_ON with WARN_ON_ONCE and return. Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
f7b2927 introduced tx checksum offload support for smsc95xx, and enabled it by default. This feature doesn't take endianness into account, so causes most tx to fail on those platforms. This patch fixes the problem fully by adding the missing conversion. An alternate workaround is to disable TX checksum offload on those platforms. The cpu impact of this feature is very low. Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
popcornmix
added a commit
that referenced
this pull request
Nov 7, 2012
smsc95xx updates for Raspberry Pi
|
Thanks. |
popcornmix
pushed a commit
that referenced
this pull request
Oct 8, 2014
Fixes the following checkpatch warnings:
WARNING: please, no space before tabs
#5: FILE: drivers/mfd/88pm860x-core.c:5:
+ * ^IHaojian Zhuang <[email protected]>$
WARNING: line over 80 characters
#143: FILE: drivers/mfd/88pm860x-core.c:143:
+ {PM8607_IRQ_AUDIO_SHORT, PM8607_IRQ_AUDIO_SHORT, "audio-short", IORESOURCE_IRQ,},
WARNING: line over 80 characters
#153: FILE: drivers/mfd/88pm860x-core.c:153:
+ {PM8607_IRQ_CHG_DONE, PM8607_IRQ_CHG_DONE, "charging done", IORESOURCE_IRQ,},
WARNING: line over 80 characters
#154: FILE: drivers/mfd/88pm860x-core.c:154:
+ {PM8607_IRQ_CHG_FAIL, PM8607_IRQ_CHG_FAIL, "charging timeout", IORESOURCE_IRQ,},
WARNING: line over 80 characters
#155: FILE: drivers/mfd/88pm860x-core.c:155:
+ {PM8607_IRQ_CHG_FAULT, PM8607_IRQ_CHG_FAULT, "charging fault", IORESOURCE_IRQ,},
WARNING: line over 80 characters
#156: FILE: drivers/mfd/88pm860x-core.c:156:
+ {PM8607_IRQ_GPADC1, PM8607_IRQ_GPADC1, "battery temperature", IORESOURCE_IRQ,},
WARNING: Avoid unnecessary line continuations
#571: FILE: drivers/mfd/88pm860x-core.c:571:
+ struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \
WARNING: line over 80 characters
#634: FILE: drivers/mfd/88pm860x-core.c:634:
+ ret = request_threaded_irq(chip->core_irq, NULL, pm860x_irq, flags | IRQF_ONESHOT,
WARNING: Unnecessary parentheses - maybe == should be = ?
#874: FILE: drivers/mfd/88pm860x-core.c:874:
+ if ((pdata == NULL))
WARNING: quoted string split across lines
#1001: FILE: drivers/mfd/88pm860x-core.c:1001:
+ dev_err(chip->dev, "Failed to detect Marvell 88PM8607. "
+ "Chip ID: %02x\n", ret);
WARNING: quoted string split across lines
#1124: FILE: drivers/mfd/88pm860x-core.c:1124:
+ dev_err(dev, "Not found \"marvell,88pm860x-slave-addr\" "
+ "property\n");
total: 0 errors, 11 warnings, 1281 lines checked
Signed-off-by: Lee Jones <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Oct 10, 2017
With device public pages at the end of my memory space, I'm getting output from _vm_normal_page(): BUG: Bad page map in process migrate_pages pte:c0800001ffff0d06 pmd:f95d3000 addr:00007fff89330000 vm_flags:00100073 anon_vma:c0000000fa899320 mapping: (null) index:7fff8933 file: (null) fault: (null) mmap: (null) readpage: (null) CPU: 0 PID: 13963 Comm: migrate_pages Tainted: P B OE 4.14.0-rc1-wip #155 Call Trace: dump_stack+0xb0/0xf4 (unreliable) print_bad_pte+0x28c/0x340 _vm_normal_page+0xc0/0x140 zap_pte_range+0x664/0xc10 unmap_page_range+0x318/0x670 unmap_vmas+0x74/0xe0 exit_mmap+0xe8/0x1f0 mmput+0xac/0x1f0 do_exit+0x348/0xcd0 do_group_exit+0x5c/0xf0 SyS_exit_group+0x1c/0x20 system_call+0x58/0x6c The pfn causing this is the very last one. Correct the bounds check accordingly. Fixes: df6ad69 ("mm/device-public-memory: device memory cache coherent with CPU") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Reza Arbab <[email protected]> Reviewed-by: Jérôme Glisse <[email protected]> Reviewed-by: Balbir Singh <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Sep 8, 2021
… event name [ Upstream commit 5acce0b ] The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ #155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Sep 8, 2021
… event name [ Upstream commit 5acce0b ] The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ #155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Sep 8, 2021
… event name The following commands: # echo 'read_max u64 size;' > synthetic_events # echo 'hist:keys=common_pid:count=count:onmax($count).trace(read_max,count)' > events/syscalls/sys_enter_read/trigger Causes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 4 PID: 1763 Comm: bash Not tainted 5.14.0-rc2-test+ #155 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strcmp+0xc/0x20 Code: 75 f7 31 c0 0f b6 0c 06 88 0c 02 48 83 c0 01 84 c9 75 f1 4c 89 c0 c3 0f 1f 80 00 00 00 00 31 c0 eb 08 48 83 c0 01 84 d2 74 0f <0f> b6 14 07 3a 14 06 74 ef 19 c0 83 c8 01 c3 31 c0 c3 66 90 48 89 RSP: 0018:ffffb5fdc0963ca8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffb3a4e040 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9714c0d0b640 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000022986b7cde R09: ffffffffb3a4dff8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9714c50603c8 R13: 0000000000000000 R14: ffff97143fdf9e48 R15: ffff9714c01a2210 FS: 00007f1fa6785740(0000) GS:ffff9714da400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000002d863004 CR4: 00000000001706e0 Call Trace: __find_event_file+0x4e/0x80 action_create+0x6b7/0xeb0 ? kstrdup+0x44/0x60 event_hist_trigger_func+0x1a07/0x2130 trigger_process_regex+0xbd/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xe9/0x310 ksys_write+0x68/0xe0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f1fa6879e87 The problem was the "trace(read_max,count)" where the "count" should be "$count" as "onmax()" only handles variables (although it really should be able to figure out that "count" is a field of sys_enter_read). But there's a path that does not find the variable and ends up passing a NULL for the event, which ends up getting passed to "strcmp()". Add a check for NULL to return and error on the command with: # cat error_log hist:syscalls:sys_enter_read: error: Couldn't create or find variable Command: hist:keys=common_pid:count=count:onmax($count).trace(read_max,count) ^ Link: https://lkml.kernel.org/r/[email protected] Cc: Masami Hiramatsu <[email protected]> Cc: [email protected] Fixes: 5045060 tracing: Add 'onmax' hist trigger action support Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Boos4721
pushed a commit
to Boos4721/raspi-linux-k5.10
that referenced
this pull request
Jun 10, 2022
commit ef09ed5 upstream. we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [raspberrypi#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ raspberrypi#155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first.. Cc: [email protected] Signed-off-by: Ye Bin <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jun 14, 2022
commit ef09ed5 upstream. we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first.. Cc: [email protected] Signed-off-by: Ye Bin <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jun 17, 2022
commit ef09ed5 upstream. we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first.. Cc: [email protected] Signed-off-by: Ye Bin <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
sigmaris
pushed a commit
to sigmaris/linux
that referenced
this pull request
Jun 23, 2022
commit ef09ed5 upstream. we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [raspberrypi#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ raspberrypi#155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first.. Cc: [email protected] Signed-off-by: Ye Bin <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
matthiakl
pushed a commit
to matthiakl/linux
that referenced
this pull request
Jun 24, 2022
commit ef09ed5 upstream. we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [raspberrypi#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ raspberrypi#155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90 It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first.. Cc: [email protected] Signed-off-by: Ye Bin <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
angiglesias
pushed a commit
to angiglesias/raspberry-kernel
that referenced
this pull request
Jul 9, 2022
New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ raspberrypi#155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jul 18, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ #155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Jul 18, 2022
commit 9827a0e upstream. New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ #155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Sep 19, 2023
If *any* object of a certain WW mutex class is locked, lockdep will consider *all* mutexes of that class as locked. Also the lock allocation tracking code will apparently register only the address of the first mutex of a given class locked in a sequence. This has the odd consequence that if that first mutex is unlocked while other mutexes of the same class remain locked and then its memory then freed, the lock alloc tracking code will incorrectly assume that memory is freed with a held lock in there. For now, work around that for drm_exec by releasing the first grabbed object lock last. v2: - Fix a typo (Danilo Krummrich) - Reword the commit message a bit. - Add a Fixes: tag Related lock alloc tracking warning: [ 322.660067] ========================= [ 322.660070] WARNING: held lock freed! [ 322.660074] 6.5.0-rc7+ #155 Tainted: G U N [ 322.660078] ------------------------- [ 322.660081] kunit_try_catch/4981 is freeing memory ffff888112adc000-ffff888112adc3ff, with a lock still held there! [ 322.660089] ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660104] 2 locks held by kunit_try_catch/4981: [ 322.660108] #0: ffffc9000343fe18 (reservation_ww_class_acquire){+.+.}-{0:0}, at: test_early_put+0x22f/0x490 [drm_exec_test] [ 322.660123] #1: ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec] [ 322.660135] stack backtrace: [ 322.660139] CPU: 7 PID: 4981 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155 [ 322.660146] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [ 322.660152] Call Trace: [ 322.660155] <TASK> [ 322.660158] dump_stack_lvl+0x57/0x90 [ 322.660164] debug_check_no_locks_freed+0x20b/0x2b0 [ 322.660172] slab_free_freelist_hook+0xa1/0x160 [ 322.660179] ? drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660186] __kmem_cache_free+0xb2/0x290 [ 322.660192] drm_exec_unlock_all+0x168/0x2a0 [drm_exec] [ 322.660200] drm_exec_fini+0xf/0x1c0 [drm_exec] [ 322.660206] test_early_put+0x289/0x490 [drm_exec_test] [ 322.660215] ? __pfx_test_early_put+0x10/0x10 [drm_exec_test] [ 322.660222] ? __kasan_check_byte+0xf/0x40 [ 322.660227] ? __ksize+0x63/0x140 [ 322.660233] ? drmm_add_final_kfree+0x3e/0xa0 [drm] [ 322.660289] ? _raw_spin_unlock_irqrestore+0x30/0x60 [ 322.660294] ? lockdep_hardirqs_on+0x7d/0x100 [ 322.660301] ? __pfx_kunit_try_run_case+0x10/0x10 [kunit] [ 322.660310] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [ 322.660319] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [ 322.660328] kthread+0x2e7/0x3c0 [ 322.660334] ? __pfx_kthread+0x10/0x10 [ 322.660339] ret_from_fork+0x2d/0x70 [ 322.660345] ? __pfx_kthread+0x10/0x10 [ 322.660349] ret_from_fork_asm+0x1b/0x30 [ 322.660358] </TASK> [ 322.660818] ok 8 test_early_put Cc: Christian König <[email protected]> Cc: Boris Brezillon <[email protected]> Cc: Danilo Krummrich <[email protected]> Cc: [email protected] Fixes: 0959321 ("drm: execution context for GEM buffers v7") Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Boris Brezillon <[email protected]> Reviewed-by: Danilo Krummrich <[email protected]> Reviewed-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
popcornmix
pushed a commit
that referenced
this pull request
Sep 19, 2023
when using __drm_kunit_helper_alloc_drm_device() the driver may be
dereferenced by device-managed resources up until the device is
freed, which is typically later than the kunit-managed resource code
frees it. Fix this by simply make the driver device-managed as well.
In short, the sequence leading to the UAF is as follows:
INIT:
Code allocates a struct device as a kunit-managed resource.
Code allocates a drm driver as a kunit-managed resource.
Code allocates a drm device as a device-managed resource.
EXIT:
Kunit resource cleanup frees the drm driver
Kunit resource cleanup puts the struct device, which starts a
device-managed resource cleanup
device-managed cleanup calls drm_dev_put()
drm_dev_put() dereferences the (now freed) drm driver -> Boom.
Related KASAN message:
[55272.551542] ==================================================================
[55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353
[55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155
[55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021
[55272.551626] Call Trace:
[55272.551629] <TASK>
[55272.551633] dump_stack_lvl+0x57/0x90
[55272.551639] print_report+0xcf/0x630
[55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70
[55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551694] kasan_report+0xd7/0x110
[55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm]
[55272.551783] devres_release_all+0x15d/0x1f0
[55272.551790] ? __pfx_devres_release_all+0x10/0x10
[55272.551797] device_unbind_cleanup+0x16/0x1a0
[55272.551802] device_release_driver_internal+0x3e5/0x540
[55272.551808] ? kobject_put+0x5d/0x4b0
[55272.551814] bus_remove_device+0x1f1/0x3f0
[55272.551819] device_del+0x342/0x910
[55272.551826] ? __pfx_device_del+0x10/0x10
[55272.551830] ? lock_release+0x339/0x5e0
[55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit]
[55272.551845] ? __pfx_lock_release+0x10/0x10
[55272.551851] platform_device_del.part.0+0x1f/0x1e0
[55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60
[55272.551863] kunit_remove_resource+0x195/0x290 [kunit]
[55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60
[55272.551877] kunit_cleanup+0x78/0x120 [kunit]
[55272.551885] ? __kthread_parkme+0xc1/0x1f0
[55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit]
[55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit]
[55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.551919] kthread+0x2e7/0x3c0
[55272.551924] ? __pfx_kthread+0x10/0x10
[55272.551929] ret_from_fork+0x2d/0x70
[55272.551935] ? __pfx_kthread+0x10/0x10
[55272.551940] ret_from_fork_asm+0x1b/0x30
[55272.551948] </TASK>
[55272.551953] Allocated by task 10351:
[55272.551956] kasan_save_stack+0x1c/0x40
[55272.551962] kasan_set_track+0x21/0x30
[55272.551966] __kasan_kmalloc+0x8b/0x90
[55272.551970] __kmalloc+0x5e/0x160
[55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit]
[55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test]
[55272.551991] kunit_try_run_case+0xdd/0x250 [kunit]
[55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.552008] kthread+0x2e7/0x3c0
[55272.552012] ret_from_fork+0x2d/0x70
[55272.552017] ret_from_fork_asm+0x1b/0x30
[55272.552024] Freed by task 10353:
[55272.552027] kasan_save_stack+0x1c/0x40
[55272.552032] kasan_set_track+0x21/0x30
[55272.552036] kasan_save_free_info+0x27/0x40
[55272.552041] __kasan_slab_free+0x106/0x180
[55272.552046] slab_free_freelist_hook+0xb3/0x160
[55272.552051] __kmem_cache_free+0xb2/0x290
[55272.552056] kunit_remove_resource+0x195/0x290 [kunit]
[55272.552064] kunit_cleanup+0x78/0x120 [kunit]
[55272.552072] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[55272.552080] kthread+0x2e7/0x3c0
[55272.552085] ret_from_fork+0x2d/0x70
[55272.552089] ret_from_fork_asm+0x1b/0x30
[55272.552096] The buggy address belongs to the object at ffff888127502800
which belongs to the cache kmalloc-512 of size 512
[55272.552105] The buggy address is located 40 bytes inside of
freed 512-byte region [ffff888127502800, ffff888127502a00)
[55272.552115] The buggy address belongs to the physical page:
[55272.552119] page:00000000af6c70ff refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127500
[55272.552127] head:00000000af6c70ff order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[55272.552133] anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
[55272.552141] page_type: 0xffffffff()
[55272.552145] raw: 0017ffffc0010200 ffff888100042c80 0000000000000000 dead000000000001
[55272.552152] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[55272.552157] page dumped because: kasan: bad access detected
[55272.552163] Memory state around the buggy address:
[55272.552167] ffff888127502700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[55272.552173] ffff888127502780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[55272.552178] >ffff888127502800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552184] ^
[55272.552187] ffff888127502880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552193] ffff888127502900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[55272.552198] ==================================================================
[55272.552203] Disabling lock debugging due to kernel taint
v2:
- Update commit message, add Fixes: tag and Cc stable.
v3:
- Further commit message updates (Maxime Ripard).
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: [email protected] # v6.3+
Fixes: d987803 ("drm/tests: helpers: Allow to pass a custom drm_driver")
Signed-off-by: Thomas Hellström <[email protected]>
Reviewed-by: Francois Dugast <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
popcornmix
pushed a commit
that referenced
this pull request
Sep 25, 2023
commit 139a278 upstream. when using __drm_kunit_helper_alloc_drm_device() the driver may be dereferenced by device-managed resources up until the device is freed, which is typically later than the kunit-managed resource code frees it. Fix this by simply make the driver device-managed as well. In short, the sequence leading to the UAF is as follows: INIT: Code allocates a struct device as a kunit-managed resource. Code allocates a drm driver as a kunit-managed resource. Code allocates a drm device as a device-managed resource. EXIT: Kunit resource cleanup frees the drm driver Kunit resource cleanup puts the struct device, which starts a device-managed resource cleanup device-managed cleanup calls drm_dev_put() drm_dev_put() dereferences the (now freed) drm driver -> Boom. Related KASAN message: [55272.551542] ================================================================== [55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353 [55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155 [55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [55272.551626] Call Trace: [55272.551629] <TASK> [55272.551633] dump_stack_lvl+0x57/0x90 [55272.551639] print_report+0xcf/0x630 [55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70 [55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551694] kasan_report+0xd7/0x110 [55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551783] devres_release_all+0x15d/0x1f0 [55272.551790] ? __pfx_devres_release_all+0x10/0x10 [55272.551797] device_unbind_cleanup+0x16/0x1a0 [55272.551802] device_release_driver_internal+0x3e5/0x540 [55272.551808] ? kobject_put+0x5d/0x4b0 [55272.551814] bus_remove_device+0x1f1/0x3f0 [55272.551819] device_del+0x342/0x910 [55272.551826] ? __pfx_device_del+0x10/0x10 [55272.551830] ? lock_release+0x339/0x5e0 [55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit] [55272.551845] ? __pfx_lock_release+0x10/0x10 [55272.551851] platform_device_del.part.0+0x1f/0x1e0 [55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551863] kunit_remove_resource+0x195/0x290 [kunit] [55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551877] kunit_cleanup+0x78/0x120 [kunit] [55272.551885] ? __kthread_parkme+0xc1/0x1f0 [55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit] [55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.551919] kthread+0x2e7/0x3c0 [55272.551924] ? __pfx_kthread+0x10/0x10 [55272.551929] ret_from_fork+0x2d/0x70 [55272.551935] ? __pfx_kthread+0x10/0x10 [55272.551940] ret_from_fork_asm+0x1b/0x30 [55272.551948] </TASK> [55272.551953] Allocated by task 10351: [55272.551956] kasan_save_stack+0x1c/0x40 [55272.551962] kasan_set_track+0x21/0x30 [55272.551966] __kasan_kmalloc+0x8b/0x90 [55272.551970] __kmalloc+0x5e/0x160 [55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit] [55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test] [55272.551991] kunit_try_run_case+0xdd/0x250 [kunit] [55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552008] kthread+0x2e7/0x3c0 [55272.552012] ret_from_fork+0x2d/0x70 [55272.552017] ret_from_fork_asm+0x1b/0x30 [55272.552024] Freed by task 10353: [55272.552027] kasan_save_stack+0x1c/0x40 [55272.552032] kasan_set_track+0x21/0x30 [55272.552036] kasan_save_free_info+0x27/0x40 [55272.552041] __kasan_slab_free+0x106/0x180 [55272.552046] slab_free_freelist_hook+0xb3/0x160 [55272.552051] __kmem_cache_free+0xb2/0x290 [55272.552056] kunit_remove_resource+0x195/0x290 [kunit] [55272.552064] kunit_cleanup+0x78/0x120 [kunit] [55272.552072] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552080] kthread+0x2e7/0x3c0 [55272.552085] ret_from_fork+0x2d/0x70 [55272.552089] ret_from_fork_asm+0x1b/0x30 [55272.552096] The buggy address belongs to the object at ffff888127502800 which belongs to the cache kmalloc-512 of size 512 [55272.552105] The buggy address is located 40 bytes inside of freed 512-byte region [ffff888127502800, ffff888127502a00) [55272.552115] The buggy address belongs to the physical page: [55272.552119] page:00000000af6c70ff refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127500 [55272.552127] head:00000000af6c70ff order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [55272.552133] anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) [55272.552141] page_type: 0xffffffff() [55272.552145] raw: 0017ffffc0010200 ffff888100042c80 0000000000000000 dead000000000001 [55272.552152] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [55272.552157] page dumped because: kasan: bad access detected [55272.552163] Memory state around the buggy address: [55272.552167] ffff888127502700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552173] ffff888127502780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [55272.552178] >ffff888127502800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552184] ^ [55272.552187] ffff888127502880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552193] ffff888127502900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [55272.552198] ================================================================== [55272.552203] Disabling lock debugging due to kernel taint v2: - Update commit message, add Fixes: tag and Cc stable. v3: - Further commit message updates (Maxime Ripard). Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] # v6.3+ Fixes: d987803 ("drm/tests: helpers: Allow to pass a custom drm_driver") Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Francois Dugast <[email protected]> Acked-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Hi Raspberry Pi team,
I've backported some fixes and improvements to the smsc95xx ethernet driver for the r-pi 3.2.27 kernel, please pull.
These patches make the ethernet device consume less power during system suspend, or alternatively allow the user to enable wake on lan via magic packet.
These patches have all been accepted upstream already for the 3.7.0-rc family.