Clean up DEBOUNCE in config.h, W

qmk · zvecr · Feb 3, 2023 · Feb 3, 2023 · Feb 3, 2023 · Feb 3, 2023
commit 993ab3f7d311b61d33287c284578d86c312373ff
diff --git a/keyboards/w1_at/config.h b/keyboards/w1_at/config.h
@@ -28,9 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 

diff --git a/keyboards/waldo/config.h b/keyboards/waldo/config.h
@@ -33,9 +33,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/walletburner/cajal/config.h b/keyboards/walletburner/cajal/config.h
@@ -31,9 +31,6 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

diff --git a/keyboards/walletburner/neuron/config.h b/keyboards/walletburner/neuron/config.h
@@ -17,9 +17,6 @@
 #define BACKLIGHT_LEVELS 3
 #endif
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 

diff --git a/keyboards/waterfowl/config.h b/keyboards/waterfowl/config.h
@@ -28,9 +28,6 @@
 // COL2ROW, ROW2COL
 #define DIODE_DIRECTION COL2ROW
 
-// Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed
-#define DEBOUNCE 5
-
 // Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
 
 #define SOFT_SERIAL_PIN D2

diff --git a/keyboards/wavtype/foundation/config.h b/keyboards/wavtype/foundation/config.h
@@ -61,9 +61,6 @@
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wavtype/p01_ultra/config.h b/keyboards/wavtype/p01_ultra/config.h
@@ -75,9 +75,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 #endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/weirdo/geminate60/config.h b/keyboards/weirdo/geminate60/config.h
@@ -22,9 +22,6 @@
 #define MATRIX_ROW_PINS { A9, A10, B10, B11, B15}
 #define MATRIX_COL_PINS { A8, B14, B13, B12, B1, B0, A7 , A1 , A15, B3, B4, B5, B6, B7, B8}
 #define DIODE_DIRECTION ROW2COL
-#define DEBOUNCE 5
-
-
 
 #define RGB_DI_PIN A6
 #define RGBLED_NUM 1

diff --git a/keyboards/weirdo/kelowna/rgb64/config.h b/keyboards/weirdo/kelowna/rgb64/config.h
@@ -22,9 +22,6 @@
 #define MATRIX_COL_PINS { A3, A4, A5, A7, B0, B1, B10, B15, A8, A9, A10, B7, B6, B5, B4}
 #define MATRIX_ROW_PINS { B12, B13, B14, C11, A1}
 #define DIODE_DIRECTION ROW2COL
-#define DEBOUNCE 5
-
-
 
 #define RGB_DI_PIN A6
 #define RGBLED_NUM 64

diff --git a/keyboards/weirdo/ls_60/config.h b/keyboards/weirdo/ls_60/config.h
@@ -22,9 +22,6 @@
 #define MATRIX_ROW_PINS { A9, A10, B10, B11, B15}
 #define MATRIX_COL_PINS { A8, B14, B13, B12, B1, B0, A7 , A1 , A15, B3, B4, B5, B6, B7, B8}
 #define DIODE_DIRECTION ROW2COL
-#define DEBOUNCE 5
-
-
 
 #define RGB_DI_PIN A6
 #define RGBLED_NUM 1

diff --git a/keyboards/weirdo/naiping/np64/config.h b/keyboards/weirdo/naiping/np64/config.h
@@ -22,9 +22,6 @@
 #define MATRIX_ROW_PINS { E6, B7, F7, F4, F5 }
 #define MATRIX_COL_PINS { F6, B0, F1, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1 }
 #define DIODE_DIRECTION ROW2COL
-#define DEBOUNCE 5
-
-
 
 #define RGB_DI_PIN B1
 #define RGBLED_NUM 80

diff --git a/keyboards/weirdo/naiping/nphhkb/config.h b/keyboards/weirdo/naiping/nphhkb/config.h
@@ -22,9 +22,6 @@
 #define MATRIX_COL_PINS { A4, C15, C14, A5, A6,  A15, B1, B10, B12, B13, B14, B15,  B6, A8, B5}
 #define MATRIX_ROW_PINS { B7, B8, B9, C13, B4}
 #define DIODE_DIRECTION ROW2COL
-#define DEBOUNCE 5
-
-
 
 #define RGB_DI_PIN A7
 #define RGBLED_NUM 78

diff --git a/keyboards/weirdo/naiping/npminila/config.h b/keyboards/weirdo/naiping/npminila/config.h
@@ -22,8 +22,6 @@
 #define MATRIX_ROW_PINS { E6, B7, F7, F4, F5 }
 #define MATRIX_COL_PINS { F6, B0, F1, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2 }
 #define DIODE_DIRECTION ROW2COL
-#define DEBOUNCE 5
-
 
 #define RGB_DI_PIN D1
 #define RGBLED_NUM 82

diff --git a/keyboards/weirdo/tiger910/config.h b/keyboards/weirdo/tiger910/config.h
@@ -28,9 +28,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION ROW2COL
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wekey/polaris/config.h b/keyboards/wekey/polaris/config.h
@@ -65,9 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 //#endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wekey/we27/config.h b/keyboards/wekey/we27/config.h
@@ -144,9 +144,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
 //#endif
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/westfoxtrot/aanzee/config.h b/keyboards/westfoxtrot/aanzee/config.h
@@ -58,9 +58,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #endif
 #define RGBW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/westfoxtrot/cyclops/config.h b/keyboards/westfoxtrot/cyclops/config.h
@@ -38,9 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/westfoxtrot/cypher/rev1/config.h b/keyboards/westfoxtrot/cypher/rev1/config.h
@@ -42,9 +42,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 5
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/westfoxtrot/cypher/rev5/config.h b/keyboards/westfoxtrot/cypher/rev5/config.h
@@ -41,9 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 5
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/westfoxtrot/prophet/config.h b/keyboards/westfoxtrot/prophet/config.h
@@ -14,9 +14,6 @@
 /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/westm/westm68/config.h b/keyboards/westm/westm68/config.h
@@ -28,9 +28,6 @@
 #define MATRIX_COL_PINS { B14, B13, B12, B11, B10, B2, B1, B8, B7, B6, B5, B4, B3, A15, A14 }
 #define DIODE_DIRECTION COL2ROW
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/westm/westm9/config.h b/keyboards/westm/westm9/config.h
@@ -28,9 +28,6 @@
 #define MATRIX_COL_PINS { B8, B5, B4 }
 #define DIODE_DIRECTION COL2ROW
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/westm/westmergo/config.h b/keyboards/westm/westmergo/config.h
@@ -38,9 +38,6 @@
 #define RGB_DI_PIN A8
 #define RGBLED_NUM 16
 
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCE    5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wilba_tech/rama_works_kara/config.h b/keyboards/wilba_tech/rama_works_kara/config.h
@@ -31,9 +31,6 @@
 // COL2ROW or ROW2COL
 #define DIODE_DIRECTION COL2ROW
 
-// Set 0 if debouncing isn't needed
-#define DEBOUNCE 5
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 #define LOCKING_SUPPORT_ENABLE
 // Locking resynchronize hack

diff --git a/keyboards/wilba_tech/rama_works_koyu/config.h b/keyboards/wilba_tech/rama_works_koyu/config.h
@@ -31,9 +31,6 @@
 // COL2ROW or ROW2COL
 #define DIODE_DIRECTION COL2ROW
 
-// Set 0 if debouncing isn't needed
-#define DEBOUNCE 5
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 #define LOCKING_SUPPORT_ENABLE
 // Locking resynchronize hack

diff --git a/keyboards/wilba_tech/rama_works_m10_b/config.h b/keyboards/wilba_tech/rama_works_m10_b/config.h
@@ -41,9 +41,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_PIN C6
 #define BACKLIGHT_LEVELS 3
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wilba_tech/rama_works_m10_c/config.h b/keyboards/wilba_tech/rama_works_m10_c/config.h
@@ -35,9 +35,6 @@
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

diff --git a/keyboards/wilba_tech/rama_works_m50_a/config.h b/keyboards/wilba_tech/rama_works_m50_a/config.h
@@ -36,9 +36,6 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wilba_tech/rama_works_m50_ax/config.h b/keyboards/wilba_tech/rama_works_m50_ax/config.h
@@ -36,9 +36,6 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wilba_tech/rama_works_m60_a/config.h b/keyboards/wilba_tech/rama_works_m60_a/config.h
@@ -31,9 +31,6 @@
 // COL2ROW or ROW2COL
 #define DIODE_DIRECTION COL2ROW
 
-// Set 0 if debouncing isn't needed
-#define DEBOUNCE 5
-
 // Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap
 #define LOCKING_SUPPORT_ENABLE
 // Locking resynchronize hack

diff --git a/keyboards/wilba_tech/rama_works_m65_b/config.h b/keyboards/wilba_tech/rama_works_m65_b/config.h
@@ -36,9 +36,6 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wilba_tech/rama_works_m65_bx/config.h b/keyboards/wilba_tech/rama_works_m65_bx/config.h
@@ -36,9 +36,6 @@
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wilba_tech/rama_works_m6_a/config.h b/keyboards/wilba_tech/rama_works_m6_a/config.h
@@ -36,9 +36,6 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wilba_tech/rama_works_m6_b/config.h b/keyboards/wilba_tech/rama_works_m6_b/config.h
@@ -36,9 +36,6 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wilba_tech/rama_works_u80_a/config.h b/keyboards/wilba_tech/rama_works_u80_a/config.h
@@ -37,9 +37,6 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wilba_tech/wt60_a/config.h b/keyboards/wilba_tech/wt60_a/config.h
@@ -37,9 +37,6 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION ROW2COL
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wilba_tech/wt60_b/config.h b/keyboards/wilba_tech/wt60_b/config.h
@@ -37,10 +37,6 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */

diff --git a/keyboards/wilba_tech/wt60_bx/config.h b/keyboards/wilba_tech/wt60_bx/config.h
@@ -37,10 +37,6 @@
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */