qmk · tzarc · Aug 19, 2021
diff --git a/Makefile b/Makefile
@@ -234,10 +234,6 @@ define PARSE_RULE
         KEYBOARD_RULE=all
         REQUIRE_PLATFORM_KEY := chibios
         $$(eval $$(call PARSE_ALL_KEYBOARDS))
-    else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,all-arm_atsam),true)
-        KEYBOARD_RULE=all
-        REQUIRE_PLATFORM_KEY := arm_atsam
-        $$(eval $$(call PARSE_ALL_KEYBOARDS))
     else ifeq ($$(call COMPARE_AND_REMOVE_FROM_RULE,test),true)
         $$(eval $$(call PARSE_TEST))
     # If the rule starts with the name of a known keyboard, then continue

diff --git a/build_keyboard.mk b/build_keyboard.mk
@@ -261,10 +261,6 @@ ifdef MCU_FAMILY
     PLATFORM_KEY=chibios
     FIRMWARE_FORMAT?=bin
     OPT_DEFS += -DMCU_$(MCU_FAMILY)
-else ifdef ARM_ATSAM
-    PLATFORM=ARM_ATSAM
-    PLATFORM_KEY=arm_atsam
-    FIRMWARE_FORMAT=bin
 else
     PLATFORM=AVR
     PLATFORM_KEY=avr

diff --git a/common_features.mk b/common_features.mk
@@ -191,8 +191,6 @@ else
         # This will effectively work the same as "transient" if not supported by the chip
         SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c
       endif
-    else ifeq ($(PLATFORM),ARM_ATSAM)
-      SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
     else ifeq ($(PLATFORM),TEST)
       SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
     endif

diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md
@@ -42,7 +42,3 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s
  * [MKL26Z64](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/kl-series-cortex-m0-plus/kinetis-kl2x-72-96-mhz-usb-ultra-low-power-microcontrollers-mcus-based-on-arm-cortex-m0-plus-core:KL2x)
  * [MK20DX128](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-50-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-based-on-arm-cortex-m4-core:K20_50)
  * [MK20DX256](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-72-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-mcus-based-on-arm-cortex-m4-core:K20_72)
-
-## Atmel ATSAM
-
-There is limited support for one of Atmel's ATSAM microcontrollers, that being the [ATSAMD51J18A](https://www.microchip.com/wwwproducts/en/ATSAMD51J18A) used by the [Massdrop keyboards](https://github.com/qmk/qmk_firmware/tree/master/keyboards/massdrop).
diff --git a/docs/feature_rawhid.md b/docs/feature_rawhid.md
@@ -29,7 +29,7 @@ void raw_hid_receive(uint8_t *data, uint8_t length) {
 }
 ```
 
-These two functions send and receive packets of length `RAW_EPSIZE` bytes to and from the host (32 on LUFA/ChibiOS/V-USB, 64 on ATSAM).
+These two functions send and receive packets of length `RAW_EPSIZE` bytes to and from the host (32 on LUFA/ChibiOS/V-USB).
 
 Make sure to flash raw enabled firmware before proceeding with working on the host side.
 

diff --git a/docs/ja/compatible_microcontrollers.md b/docs/ja/compatible_microcontrollers.md
@@ -47,7 +47,3 @@ QMK は十分な容量のフラッシュメモリを備えた USB 対応 AVR ま
 * [MKL26Z64](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/kl-series-cortex-m0-plus/kinetis-kl2x-72-96-mhz-usb-ultra-low-power-microcontrollers-mcus-based-on-arm-cortex-m0-plus-core:KL2x)
 * [MK20DX128](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-50-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-based-on-arm-cortex-m4-core:K20_50)
 * [MK20DX256](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-72-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-mcus-based-on-arm-cortex-m4-core:K20_72)
-
-## Atmel ATSAM
-
-Atmel の ATSAM マイクロコントローラの一つである、[Massdrop keyboards](https://github.com/qmk/qmk_firmware/tree/master/keyboards/massdrop) で使用されている [ATSAMD51J18A](https://www.microchip.com/wwwproducts/en/ATSAMD51J18A) には限定的なサポートがあります。
diff --git a/docs/ja/feature_rawhid.md b/docs/ja/feature_rawhid.md
@@ -34,7 +34,7 @@ void raw_hid_receive(uint8_t *data, uint8_t length) {
 }
 ```
 
-これら2つの関数は、ホストとの間で長さ `RAW_EPSIZE` バイトのパケットを送受信します (LUFA/ChibiOS/V-USB では 32、ATSAM では 64)。
+これら2つの関数は、ホストとの間で長さ `RAW_EPSIZE` バイトのパケットを送受信します (LUFA/ChibiOS/V-USB では 32)。
 
 ホスト側での作業を進める前に、raw 対応のファームウェアを書き込むようにしてください。
 

diff --git a/keyboards/massdrop/alt/alt.c b/keyboards/massdrop/alt/alt.c
diff --git a/keyboards/massdrop/alt/alt.h b/keyboards/massdrop/alt/alt.h
diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h
diff --git a/keyboards/massdrop/alt/config_led.c b/keyboards/massdrop/alt/config_led.c
-Original file line number
+Diff line change
@@ Expand Up / @@ -29,7 +29,7 @@ void raw_hid_receive(uint8_t *data, uint8_t length) { @@
     }
     ```
-    These two functions send and receive packets of length `RAW_EPSIZE` bytes to and from the host (32 on LUFA/ChibiOS/V-USB, 64 on ATSAM).
+    These two functions send and receive packets of length `RAW_EPSIZE` bytes to and from the host (32 on LUFA/ChibiOS/V-USB).
     Make sure to flash raw enabled firmware before proceeding with working on the host side.
@@ Expand Down @@