serw12 #34
Merged
serw12 #34
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
… Zen CPUs Voltages and current are reported by Zen CPUs. However, the means to do so is undocumented, changes from CPU to CPU, and the raw data is not calibrated. Calibration information is available, but again not documented. This results in less than perfect user experience, up to concerns that loading the driver might possibly damage the hardware (by reporting out-of range voltages). Effectively support for reporting voltages and current is not maintainable. Drop it. Cc: Artem S. Tashkinov <[email protected]> Cc: Wei Huang <[email protected]> Tested-by: Wei Huang <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
jacobgkau
approved these changes
Jan 4, 2021
There was a problem hiding this comment.
Removes voltages and current from sensor readings on serw12, leaving only the temperature readings. No change in sensor output on other systems (k10temp is AMD-specific, and it looks like this should only affect serw12 and possibly thelio-r1/r2 since Threadripper was excluded from showing this already.)
The only other concern I'd have would be whether amd-ppt-bin uses this data; I'm assuming not (although I had an unrelated issue while trying to test: pop-os/amd-ppt-bin#4)
crawfxrd
approved these changes
Jan 4, 2021
jackpot51
pushed a commit
that referenced
this pull request
Nov 22, 2021
[ Upstream commit 8ef9dc0 ] We got the following lockdep splat while running fstests (specifically btrfs/003 and btrfs/020 in a row) with the new rc. This was uncovered by 87579e9 ("loop: use worker per cgroup instead of kworker") which converted loop to using workqueues, which comes with lockdep annotations that don't exist with kworkers. The lockdep splat is as follows: WARNING: possible circular locking dependency detected 5.14.0-rc2-custom+ #34 Not tainted ------------------------------------------------------ losetup/156417 is trying to acquire lock: ffff9c7645b02d38 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x84/0x600 but task is already holding lock: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (&lo->lo_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 lo_open+0x28/0x60 [loop] blkdev_get_whole+0x28/0xf0 blkdev_get_by_dev.part.0+0x168/0x3c0 blkdev_open+0xd2/0xe0 do_dentry_open+0x163/0x3a0 path_openat+0x74d/0xa40 do_filp_open+0x9c/0x140 do_sys_openat2+0xb1/0x170 __x64_sys_openat+0x54/0x90 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #4 (&disk->open_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 blkdev_get_by_dev.part.0+0xd1/0x3c0 blkdev_get_by_path+0xc0/0xd0 btrfs_scan_one_device+0x52/0x1f0 [btrfs] btrfs_control_ioctl+0xac/0x170 [btrfs] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (uuid_mutex){+.+.}-{3:3}: __mutex_lock+0xba/0x7c0 btrfs_rm_device+0x48/0x6a0 [btrfs] btrfs_ioctl+0x2d1c/0x3110 [btrfs] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#11){.+.+}-{0:0}: lo_write_bvec+0x112/0x290 [loop] loop_process_work+0x25f/0xcb0 [loop] process_one_work+0x28f/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: process_one_work+0x266/0x5d0 worker_thread+0x55/0x3c0 kthread+0x140/0x170 ret_from_fork+0x22/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: __lock_acquire+0x1130/0x1dc0 lock_acquire+0xf5/0x320 flush_workqueue+0xae/0x600 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x650 [loop] lo_ioctl+0x29d/0x780 [loop] block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 1 lock held by losetup/156417: #0: ffff9c7647395468 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x650 [loop] stack backtrace: CPU: 8 PID: 156417 Comm: losetup Not tainted 5.14.0-rc2-custom+ #34 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack_lvl+0x57/0x72 check_noncircular+0x10a/0x120 __lock_acquire+0x1130/0x1dc0 lock_acquire+0xf5/0x320 ? flush_workqueue+0x84/0x600 flush_workqueue+0xae/0x600 ? flush_workqueue+0x84/0x600 drain_workqueue+0xa0/0x110 destroy_workqueue+0x36/0x250 __loop_clr_fd+0x9a/0x650 [loop] lo_ioctl+0x29d/0x780 [loop] ? __lock_acquire+0x3a0/0x1dc0 ? update_dl_rq_load_avg+0x152/0x360 ? lock_is_held_type+0xa5/0x120 ? find_held_lock.constprop.0+0x2b/0x80 block_ioctl+0x3f/0x50 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f645884de6b Usually the uuid_mutex exists to protect the fs_devices that map together all of the devices that match a specific uuid. In rm_device we're messing with the uuid of a device, so it makes sense to protect that here. However in doing that it pulls in a whole host of lockdep dependencies, as we call mnt_may_write() on the sb before we grab the uuid_mutex, thus we end up with the dependency chain under the uuid_mutex being added under the normal sb write dependency chain, which causes problems with loop devices. We don't need the uuid mutex here however. If we call btrfs_scan_one_device() before we scratch the super block we will find the fs_devices and not find the device itself and return EBUSY because the fs_devices is open. If we call it after the scratch happens it will not appear to be a valid btrfs file system. We do not need to worry about other fs_devices modifying operations here because we're protected by the exclusive operations locking. So drop the uuid_mutex here in order to fix the lockdep splat. A more detailed explanation from the discussion: We are worried about rm and scan racing with each other, before this change we'll zero the device out under the UUID mutex so when scan does run it'll make sure that it can go through the whole device scan thing without rm messing with us. We aren't worried if the scratch happens first, because the result is we don't think this is a btrfs device and we bail out. The only case we are concerned with is we scratch _after_ scan is able to read the superblock and gets a seemingly valid super block, so lets consider this case. Scan will call device_list_add() with the device we're removing. We'll call find_fsid_with_metadata_uuid() and get our fs_devices for this UUID. At this point we lock the fs_devices->device_list_mutex. This is what protects us in this case, but we have two cases here. 1. We aren't to the device removal part of the RM. We found our device, and device name matches our path, we go down and we set total_devices to our super number of devices, which doesn't affect anything because we haven't done the remove yet. 2. We are past the device removal part, which is protected by the device_list_mutex. Scan doesn't find the device, it goes down and does the if (fs_devices->opened) return -EBUSY; check and we bail out. Nothing about this situation is ideal, but the lockdep splat is real, and the fix is safe, tho admittedly a bit scary looking. Reviewed-by: Anand Jain <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> [ copy more from the discussion ] Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
jackpot51
pushed a commit
that referenced
this pull request
Jan 18, 2022
[ Upstream commit 5f50153 ] The function obtain the next buffer without boundary check. We should return with I/O error code. The bug is found by fuzzing and the crash report is attached. It is an OOB bug although reported as use-after-free. [ 4.804724] BUG: KASAN: use-after-free in aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.805661] Read of size 4 at addr ffff888034fe93a8 by task ksoftirqd/0/9 [ 4.806505] [ 4.806703] CPU: 0 PID: 9 Comm: ksoftirqd/0 Tainted: G W 5.6.0 #34 [ 4.809030] Call Trace: [ 4.809343] dump_stack+0x76/0xa0 [ 4.809755] print_address_description.constprop.0+0x16/0x200 [ 4.810455] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.811234] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.813183] __kasan_report.cold+0x37/0x7c [ 4.813715] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.814393] kasan_report+0xe/0x20 [ 4.814837] aq_ring_rx_clean+0x1e88/0x2730 [atlantic] [ 4.815499] ? hw_atl_b0_hw_ring_rx_receive+0x9a5/0xb90 [atlantic] [ 4.816290] aq_vec_poll+0x179/0x5d0 [atlantic] [ 4.816870] ? _GLOBAL__sub_I_65535_1_aq_pci_func_init+0x20/0x20 [atlantic] [ 4.817746] ? __next_timer_interrupt+0xba/0xf0 [ 4.818322] net_rx_action+0x363/0xbd0 [ 4.818803] ? call_timer_fn+0x240/0x240 [ 4.819302] ? __switch_to_asm+0x40/0x70 [ 4.819809] ? napi_busy_loop+0x520/0x520 [ 4.820324] __do_softirq+0x18c/0x634 [ 4.820797] ? takeover_tasklets+0x5f0/0x5f0 [ 4.821343] run_ksoftirqd+0x15/0x20 [ 4.821804] smpboot_thread_fn+0x2f1/0x6b0 [ 4.822331] ? smpboot_unregister_percpu_thread+0x160/0x160 [ 4.823041] ? __kthread_parkme+0x80/0x100 [ 4.823571] ? smpboot_unregister_percpu_thread+0x160/0x160 [ 4.824301] kthread+0x2b5/0x3b0 [ 4.824723] ? kthread_create_on_node+0xd0/0xd0 [ 4.825304] ret_from_fork+0x35/0x40 Signed-off-by: Zekun Shen <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
jackpot51
pushed a commit
that referenced
this pull request
Jan 18, 2022
commit 07edfec upstream. At CPU-hotplug time, unbind_worker() may preempt a worker while it is waking up. In that case the following scenario can happen: unbind_workers() wq_worker_running() -------------- ------------------- if (!(worker->flags & WORKER_NOT_RUNNING)) //PREEMPTED by unbind_workers worker->flags |= WORKER_UNBOUND; [...] atomic_set(&pool->nr_running, 0); //resume to worker atomic_inc(&worker->pool->nr_running); After unbind_worker() resets pool->nr_running, the value is expected to remain 0 until the pool ever gets rebound in case cpu_up() is called on the target CPU in the future. But here the race leaves pool->nr_running with a value of 1, triggering the following warning when the worker goes idle: WARNING: CPU: 3 PID: 34 at kernel/workqueue.c:1823 worker_enter_idle+0x95/0xc0 Modules linked in: CPU: 3 PID: 34 Comm: kworker/3:0 Not tainted 5.16.0-rc1+ #34 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 Workqueue: 0x0 (rcu_par_gp) RIP: 0010:worker_enter_idle+0x95/0xc0 Code: 04 85 f8 ff ff ff 39 c1 7f 09 48 8b 43 50 48 85 c0 74 1b 83 e2 04 75 99 8b 43 34 39 43 30 75 91 8b 83 00 03 00 00 85 c0 74 87 <0f> 0b 5b c3 48 8b 35 70 f1 37 01 48 8d 7b 48 48 81 c6 e0 93 0 RSP: 0000:ffff9b7680277ed0 EFLAGS: 00010086 RAX: 00000000ffffffff RBX: ffff93465eae9c00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9346418a0000 RDI: ffff934641057140 RBP: ffff934641057170 R08: 0000000000000001 R09: ffff9346418a0080 R10: ffff9b768027fdf0 R11: 0000000000002400 R12: ffff93465eae9c20 R13: ffff93465eae9c20 R14: ffff93465eae9c70 R15: ffff934641057140 FS: 0000000000000000(0000) GS:ffff93465eac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000001cc0c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> worker_thread+0x89/0x3d0 ? process_one_work+0x400/0x400 kthread+0x162/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Also due to this incorrect "nr_running == 1", further queued work may end up not being served, because no worker is awaken at work insert time. This raises rcutorture writer stalls for example. Fix this with disabling preemption in the right place in wq_worker_running(). It's worth noting that if the worker migrates and runs concurrently with unbind_workers(), it is guaranteed to see the WORKER_UNBOUND flag update due to set_cpus_allowed_ptr() acquiring/releasing rq->lock. Fixes: 6d25be5 ("sched/core, workqueues: Distangle worker accounting from rq lock") Reviewed-by: Lai Jiangshan <[email protected]> Tested-by: Paul E. McKenney <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Sebastian Andrzej Siewior <[email protected]> Cc: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
jackpot51
pushed a commit
that referenced
this pull request
Feb 28, 2022
commit 07edfec upstream. At CPU-hotplug time, unbind_worker() may preempt a worker while it is waking up. In that case the following scenario can happen: unbind_workers() wq_worker_running() -------------- ------------------- if (!(worker->flags & WORKER_NOT_RUNNING)) //PREEMPTED by unbind_workers worker->flags |= WORKER_UNBOUND; [...] atomic_set(&pool->nr_running, 0); //resume to worker atomic_inc(&worker->pool->nr_running); After unbind_worker() resets pool->nr_running, the value is expected to remain 0 until the pool ever gets rebound in case cpu_up() is called on the target CPU in the future. But here the race leaves pool->nr_running with a value of 1, triggering the following warning when the worker goes idle: WARNING: CPU: 3 PID: 34 at kernel/workqueue.c:1823 worker_enter_idle+0x95/0xc0 Modules linked in: CPU: 3 PID: 34 Comm: kworker/3:0 Not tainted 5.16.0-rc1+ #34 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 Workqueue: 0x0 (rcu_par_gp) RIP: 0010:worker_enter_idle+0x95/0xc0 Code: 04 85 f8 ff ff ff 39 c1 7f 09 48 8b 43 50 48 85 c0 74 1b 83 e2 04 75 99 8b 43 34 39 43 30 75 91 8b 83 00 03 00 00 85 c0 74 87 <0f> 0b 5b c3 48 8b 35 70 f1 37 01 48 8d 7b 48 48 81 c6 e0 93 0 RSP: 0000:ffff9b7680277ed0 EFLAGS: 00010086 RAX: 00000000ffffffff RBX: ffff93465eae9c00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9346418a0000 RDI: ffff934641057140 RBP: ffff934641057170 R08: 0000000000000001 R09: ffff9346418a0080 R10: ffff9b768027fdf0 R11: 0000000000002400 R12: ffff93465eae9c20 R13: ffff93465eae9c20 R14: ffff93465eae9c70 R15: ffff934641057140 FS: 0000000000000000(0000) GS:ffff93465eac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000001cc0c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> worker_thread+0x89/0x3d0 ? process_one_work+0x400/0x400 kthread+0x162/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Also due to this incorrect "nr_running == 1", further queued work may end up not being served, because no worker is awaken at work insert time. This raises rcutorture writer stalls for example. Fix this with disabling preemption in the right place in wq_worker_running(). It's worth noting that if the worker migrates and runs concurrently with unbind_workers(), it is guaranteed to see the WORKER_UNBOUND flag update due to set_cpus_allowed_ptr() acquiring/releasing rq->lock. Fixes: 6d25be5 ("sched/core, workqueues: Distangle worker accounting from rq lock") Reviewed-by: Lai Jiangshan <[email protected]> Tested-by: Paul E. McKenney <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Sebastian Andrzej Siewior <[email protected]> Cc: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
jackpot51
pushed a commit
that referenced
this pull request
Feb 28, 2022
commit 45c753f upstream. At CPU-hotplug time, unbind_workers() may preempt a worker while it is going to sleep. In that case the following scenario can happen: unbind_workers() wq_worker_sleeping() -------------- ------------------- if (worker->flags & WORKER_NOT_RUNNING) return; //PREEMPTED by unbind_workers worker->flags |= WORKER_UNBOUND; [...] atomic_set(&pool->nr_running, 0); //resume to worker atomic_dec_and_test(&pool->nr_running); After unbind_worker() resets pool->nr_running, the value is expected to remain 0 until the pool ever gets rebound in case cpu_up() is called on the target CPU in the future. But here the race leaves pool->nr_running with a value of -1, triggering the following warning when the worker goes idle: WARNING: CPU: 3 PID: 34 at kernel/workqueue.c:1823 worker_enter_idle+0x95/0xc0 Modules linked in: CPU: 3 PID: 34 Comm: kworker/3:0 Not tainted 5.16.0-rc1+ #34 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 Workqueue: 0x0 (rcu_par_gp) RIP: 0010:worker_enter_idle+0x95/0xc0 Code: 04 85 f8 ff ff ff 39 c1 7f 09 48 8b 43 50 48 85 c0 74 1b 83 e2 04 75 99 8b 43 34 39 43 30 75 91 8b 83 00 03 00 00 85 c0 74 87 <0f> 0b 5b c3 48 8b 35 70 f1 37 01 48 8d 7b 48 48 81 c6 e0 93 0 RSP: 0000:ffff9b7680277ed0 EFLAGS: 00010086 RAX: 00000000ffffffff RBX: ffff93465eae9c00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9346418a0000 RDI: ffff934641057140 RBP: ffff934641057170 R08: 0000000000000001 R09: ffff9346418a0080 R10: ffff9b768027fdf0 R11: 0000000000002400 R12: ffff93465eae9c20 R13: ffff93465eae9c20 R14: ffff93465eae9c70 R15: ffff934641057140 FS: 0000000000000000(0000) GS:ffff93465eac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000001cc0c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> worker_thread+0x89/0x3d0 ? process_one_work+0x400/0x400 kthread+0x162/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Also due to this incorrect "nr_running == -1", all sorts of hazards can happen, starting with queued works being ignored because no workers are awaken at insert_work() time. Fix this with checking again the worker flags while pool->lock is locked. Fixes: b945efc ("sched: Remove pointless preemption disable in sched_submit_work()") Reviewed-by: Lai Jiangshan <[email protected]> Tested-by: Paul E. McKenney <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Sebastian Andrzej Siewior <[email protected]> Cc: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
13r0ck
pushed a commit
that referenced
this pull request
Mar 13, 2023
commit e0bead9 upstream. Move the VMCB updates from avic_refresh_apicv_exec_ctrl() into avic_set_virtual_apic_mode() and invert the dependency being said functions to avoid calling avic_vcpu_{load,put}() and avic_set_pi_irte_mode() when "only" setting the virtual APIC mode. avic_set_virtual_apic_mode() is invoked from common x86 with preemption enabled, which makes avic_vcpu_{load,put}() unhappy. Luckily, calling those and updating IRTE stuff is unnecessary as the only reason avic_set_virtual_apic_mode() is called is to handle transitions between xAPIC and x2APIC that don't also toggle APICv activation. And if activation doesn't change, there's no need to fiddle with the physical APIC ID table or update IRTE. The "full" refresh is guaranteed to be called if activation changes in this case as the only call to the "set" path is: kvm_vcpu_update_apicv(vcpu); static_call_cond(kvm_x86_set_virtual_apic_mode)(vcpu); and kvm_vcpu_update_apicv() invokes the refresh if activation changes: if (apic->apicv_active == activate) goto out; apic->apicv_active = activate; kvm_apic_update_apicv(vcpu); static_call(kvm_x86_refresh_apicv_exec_ctrl)(vcpu); Rename the helper to reflect that it is also called during "refresh". WARNING: CPU: 183 PID: 49186 at arch/x86/kvm/svm/avic.c:1081 avic_vcpu_put+0xde/0xf0 [kvm_amd] CPU: 183 PID: 49186 Comm: stable Tainted: G O 6.0.0-smp--fcddbca45f0a-sink #34 Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 10.48.0 01/27/2022 RIP: 0010:avic_vcpu_put+0xde/0xf0 [kvm_amd] avic_refresh_apicv_exec_ctrl+0x142/0x1c0 [kvm_amd] avic_set_virtual_apic_mode+0x5a/0x70 [kvm_amd] kvm_lapic_set_base+0x149/0x1a0 [kvm] kvm_set_apic_base+0x8f/0xd0 [kvm] kvm_set_msr_common+0xa3a/0xdc0 [kvm] svm_set_msr+0x364/0x6b0 [kvm_amd] __kvm_set_msr+0xb8/0x1c0 [kvm] kvm_emulate_wrmsr+0x58/0x1d0 [kvm] msr_interception+0x1c/0x30 [kvm_amd] svm_invoke_exit_handler+0x31/0x100 [kvm_amd] svm_handle_exit+0xfc/0x160 [kvm_amd] vcpu_enter_guest+0x21bb/0x23e0 [kvm] vcpu_run+0x92/0x450 [kvm] kvm_arch_vcpu_ioctl_run+0x43e/0x6e0 [kvm] kvm_vcpu_ioctl+0x559/0x620 [kvm] Fixes: 05c4fe8 ("KVM: SVM: Refresh AVIC configuration when changing APIC mode") Cc: [email protected] Cc: Suravee Suthikulpanit <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
mmstick
pushed a commit
that referenced
this pull request
Aug 14, 2023
[ Upstream commit 0756384 ] The nexthop code expects a 31 bit hash, such as what is returned by fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash returned by skb_get_hash() can lead to problems related to the fact that 'int hash' is a negative number when the MSB is set. In the case of hash threshold nexthop groups, nexthop_select_path_hthr() will disproportionately select the first nexthop group entry. In the case of resilient nexthop groups, nexthop_select_path_res() may do an out of bounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535 which leads to the following panic: BUG: unable to handle page fault for address: ffffc900025910c8 PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 RIP: 0000:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0000:0000000000000000 EFLAGS: 00000000 ORIG_RAX: 0000000000000000 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: CR2: ffffc900025910c8 ---[ end trace 0000000000000000 ]--- RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x2ca00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fix this problem by ensuring the MSB of hash is 0 using a right shift - the same approach used in fib_multipath_hash() and rt6_multipath_hash(). Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries") Signed-off-by: Benjamin Poirier <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
mmstick
pushed a commit
that referenced
this pull request
Dec 11, 2023
[ Upstream commit 282c1d7 ] [ 567.613292] shift exponent 255 is too large for 64-bit type 'long unsigned int' [ 567.614498] CPU: 5 PID: 238 Comm: kworker/5:1 Tainted: G OE 6.2.0-34-generic #34~22.04.1-Ubuntu [ 567.614502] Hardware name: AMD Splinter/Splinter-RPL, BIOS WS43927N_871 09/25/2023 [ 567.614504] Workqueue: events send_exception_work_handler [amdgpu] [ 567.614748] Call Trace: [ 567.614750] <TASK> [ 567.614753] dump_stack_lvl+0x48/0x70 [ 567.614761] dump_stack+0x10/0x20 [ 567.614763] __ubsan_handle_shift_out_of_bounds+0x156/0x310 [ 567.614769] ? srso_alias_return_thunk+0x5/0x7f [ 567.614773] ? update_sd_lb_stats.constprop.0+0xf2/0x3c0 [ 567.614780] svm_range_split_by_granularity.cold+0x2b/0x34 [amdgpu] [ 567.615047] ? srso_alias_return_thunk+0x5/0x7f [ 567.615052] svm_migrate_to_ram+0x185/0x4d0 [amdgpu] [ 567.615286] do_swap_page+0x7b6/0xa30 [ 567.615291] ? srso_alias_return_thunk+0x5/0x7f [ 567.615294] ? __free_pages+0x119/0x130 [ 567.615299] handle_pte_fault+0x227/0x280 [ 567.615303] __handle_mm_fault+0x3c0/0x720 [ 567.615311] handle_mm_fault+0x119/0x330 [ 567.615314] ? lock_mm_and_find_vma+0x44/0x250 [ 567.615318] do_user_addr_fault+0x1a9/0x640 [ 567.615323] exc_page_fault+0x81/0x1b0 [ 567.615328] asm_exc_page_fault+0x27/0x30 [ 567.615332] RIP: 0010:__get_user_8+0x1c/0x30 Signed-off-by: Jesse Zhang <[email protected]> Suggested-by: Philip Yang <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
mmstick
pushed a commit
that referenced
this pull request
Dec 11, 2023
[ Upstream commit be97d0d ] commit 31da94c ("riscv: add VMAP_STACK overflow detection") added support for CONFIG_VMAP_STACK. If overflow is detected, CPU switches to `shadow_stack` temporarily before switching finally to per-cpu `overflow_stack`. If two CPUs/harts are racing and end up in over flowing kernel stack, one or both will end up corrupting each other state because `shadow_stack` is not per-cpu. This patch optimizes per-cpu overflow stack switch by directly picking per-cpu `overflow_stack` and gets rid of `shadow_stack`. Following are the changes in this patch - Defines an asm macro to obtain per-cpu symbols in destination register. - In entry.S, when overflow is detected, per-cpu overflow stack is located using per-cpu asm macro. Computing per-cpu symbol requires a temporary register. x31 is saved away into CSR_SCRATCH (CSR_SCRATCH is anyways zero since we're in kernel). Please see Links for additional relevant disccussion and alternative solution. Tested by `echo EXHAUST_STACK > /sys/kernel/debug/provoke-crash/DIRECT` Kernel crash log below Insufficient stack space to handle exception!/debug/provoke-crash/DIRECT Task stack: [0xff20000010a98000..0xff20000010a9c000] Overflow stack: [0xff600001f7d98370..0xff600001f7d99370] CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) epc : __memset+0x60/0xfc ra : recursive_loop+0x48/0xc6 [lkdtm] epc : ffffffff808de0e4 ra : ffffffff0163a752 sp : ff20000010a97e80 gp : ffffffff815c0330 tp : ff600000820ea280 t0 : ff20000010a97e88 t1 : 000000000000002e t2 : 3233206874706564 s0 : ff20000010a982b0 s1 : 0000000000000012 a0 : ff20000010a97e88 a1 : 0000000000000000 a2 : 0000000000000400 a3 : ff20000010a98288 a4 : 0000000000000000 a5 : 0000000000000000 a6 : fffffffffffe43f0 a7 : 00007fffffffffff s2 : ff20000010a97e88 s3 : ffffffff01644680 s4 : ff20000010a9be90 s5 : ff600000842ba6c0 s6 : 00aaaaaac29e42b0 s7 : 00fffffff0aa3684 s8 : 00aaaaaac2978040 s9 : 0000000000000065 s10: 00ffffff8a7cad10 s11: 00ffffff8a76a4e0 t3 : ffffffff815dbaf4 t4 : ffffffff815dbaf4 t5 : ffffffff815dbab8 t6 : ff20000010a9bb48 status: 0000000200000120 badaddr: ff20000010a97e88 cause: 000000000000000f Kernel panic - not syncing: Kernel stack overflow CPU: 1 PID: 205 Comm: bash Not tainted 6.1.0-rc2-00001-g328a1f96f7b9 #34 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff80006754>] dump_backtrace+0x30/0x38 [<ffffffff808de798>] show_stack+0x40/0x4c [<ffffffff808ea2a8>] dump_stack_lvl+0x44/0x5c [<ffffffff808ea2d8>] dump_stack+0x18/0x20 [<ffffffff808dec06>] panic+0x126/0x2fe [<ffffffff800065ea>] walk_stackframe+0x0/0xf0 [<ffffffff0163a752>] recursive_loop+0x48/0xc6 [lkdtm] SMP: stopping secondary CPUs ---[ end Kernel panic - not syncing: Kernel stack overflow ]--- Cc: Guo Ren <[email protected]> Cc: Jisheng Zhang <[email protected]> Link: https://lore.kernel.org/linux-riscv/Y347B0x4VUNOd6V7@xhacker/T/#t Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Deepak Gupta <[email protected]> Co-developed-by: Sami Tolvanen <[email protected]> Signed-off-by: Sami Tolvanen <[email protected]> Acked-by: Guo Ren <[email protected]> Tested-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Remove invalid current reporting by cherry picking upstream commit. Based on #33 and must merge after that. Push straight to master to avoid rebuilds