block: ublk: switch to ioctl command encoding

All ublk commands(control, IO) should have taken ioctl command encoding
from the beginning, because ioctl command encoding defines each code
uniquely, so driver can figure out wrong command sent from userspace
easily; 2) it might help security subsystem for audit uring cmd[1].

Unfortunately we didn't do that way, and it could be one lesson for
ublk driver.

So switch to ioctl command encoding now, we still support commands encoded
in old way, but they become legacy definition. Any new command should take
ioctl encoding.

See ublksrv code for switching to ioctl command encoding in [2].

[1] https://lore.kernel.org/io-uring/CAHC9VhSVzujW9LOj5Km80AjU0EfAuukoLrxO6BEfnXeK_s6bAg@mail.gmail.com/
[2] https://github.com/ming1/ubdsrv/commits/ioctl_cmd_encoding

Cc: Christoph Hellwig <[email protected]>
Cc: Ken Kurematsu <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>

drivers/block/Kconfig

@@ -385,6 +385,23 @@ config BLK_DEV_UBLK
 	  can handle batch more effectively, but task_work_add() isn't exported
 	  for module, so ublk has to be built to kernel.
 
+config BLKDEV_UBLK_LEGACY_OPCODES
+	bool "Support legacy command opcode"
+	depends on BLK_DEV_UBLK
+	default y
+	help
+	  ublk driver started to take plain command encoding, which turns out
+	  one bad way. The traditional ioctl command opcode encodes more
+	  info and basically defines each code uniquely, so opcode conflict
+	  is avoided, and driver can handle wrong command easily, meantime it
+	  may help security subsystem to audit io_uring command.
+
+	  Say Y if your application still uses legacy command opcode.
+
+	  Say N if you don't want to support legacy command opcode. It is
+	  suggested to enable N if your application(ublk server) switches to
+	  ioctl command encoding.
+
 source "drivers/block/rnbd/Kconfig"
 
 endif # BLK_DEV

drivers/block/ublk_drv.c

@@ -53,7 +53,8 @@
 		| UBLK_F_NEED_GET_DATA \
 		| UBLK_F_USER_RECOVERY \
 		| UBLK_F_USER_RECOVERY_REISSUE \
-		| UBLK_F_UNPRIVILEGED_DEV)
+		| UBLK_F_UNPRIVILEGED_DEV \
+		| UBLK_F_CMD_IOCTL_ENCODE)
 
 /* All UBLK_PARAM_TYPE_* should be included here */
 #define UBLK_PARAM_TYPE_ALL (UBLK_PARAM_TYPE_BASIC | \
@@ -1253,6 +1254,19 @@ static void ublk_handle_need_get_data(struct ublk_device *ub, int q_id,
 	ublk_queue_cmd(ubq, req);
 }
 
+static inline int ublk_check_cmd_op(u32 cmd_op)
+{
+	u32 ioc_type = _IOC_TYPE(cmd_op);
+
+	if (IS_ENABLED(CONFIG_BLKDEV_UBLK_LEGACY_OPCODES) && ioc_type != 'u')
+		return -EOPNOTSUPP;
+
+	if (ioc_type != 'u' && ioc_type != 0)
+		return -EOPNOTSUPP;
+
+	return 0;
+}
+
 static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
 {
 	struct ublksrv_io_cmd *ub_cmd = (struct ublksrv_io_cmd *)cmd->cmd;
@@ -1294,10 +1308,14 @@ static int ublk_ch_uring_cmd(struct io_uring_cmd *cmd, unsigned int issue_flags)
 	 * iff the driver have set the UBLK_IO_FLAG_NEED_GET_DATA.
 	 */
 	if ((!!(io->flags & UBLK_IO_FLAG_NEED_GET_DATA))
-			^ (cmd_op == UBLK_IO_NEED_GET_DATA))
+			^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
+		goto out;
+
+	ret = ublk_check_cmd_op(cmd_op);
+	if (ret)
 		goto out;
 
-	switch (cmd_op) {
+	switch (_IOC_NR(cmd_op)) {
 	case UBLK_IO_FETCH_REQ:
 		/* UBLK_IO_FETCH_REQ is only allowed before queue is setup */
 		if (ublk_queue_ready(ubq)) {
@@ -1743,6 +1761,8 @@ static int ublk_ctrl_add_dev(struct io_uring_cmd *cmd)
 	if (!IS_BUILTIN(CONFIG_BLK_DEV_UBLK))
 		ub->dev_info.flags |= UBLK_F_URING_CMD_COMP_IN_TASK;
 
+	ub->dev_info.flags |= UBLK_F_CMD_IOCTL_ENCODE;
+
 	/* We are not ready to support zero copy */
 	ub->dev_info.flags &= ~UBLK_F_SUPPORT_ZERO_COPY;
 
@@ -2099,7 +2119,7 @@ static int ublk_ctrl_uring_cmd_permission(struct ublk_device *ub,
 		 * know if the specified device is created as unprivileged
 		 * mode.
 		 */
-		if (cmd->cmd_op != UBLK_CMD_GET_DEV_INFO2)
+		if (_IOC_NR(cmd->cmd_op) != UBLK_CMD_GET_DEV_INFO2)
 			return 0;
 	}
 
@@ -2125,7 +2145,7 @@ static int ublk_ctrl_uring_cmd_permission(struct ublk_device *ub,
 	dev_path[header->dev_path_len] = 0;
 
 	ret = -EINVAL;
-	switch (cmd->cmd_op) {
+	switch (_IOC_NR(cmd->cmd_op)) {
 	case UBLK_CMD_GET_DEV_INFO:
 	case UBLK_CMD_GET_DEV_INFO2:
 	case UBLK_CMD_GET_QUEUE_AFFINITY:
@@ -2164,6 +2184,7 @@ static int ublk_ctrl_uring_cmd(struct io_uring_cmd *cmd,
 {
 	struct ublksrv_ctrl_cmd *header = (struct ublksrv_ctrl_cmd *)cmd->cmd;
 	struct ublk_device *ub = NULL;
+	u32 cmd_op = cmd->cmd_op;
 	int ret = -EINVAL;
 
 	if (issue_flags & IO_URING_F_NONBLOCK)
@@ -2174,22 +2195,22 @@ static int ublk_ctrl_uring_cmd(struct io_uring_cmd *cmd,
 	if (!(issue_flags & IO_URING_F_SQE128))
 		goto out;
 
-	if (cmd->cmd_op != UBLK_CMD_ADD_DEV) {
+	ret = ublk_check_cmd_op(cmd_op);
+	if (ret)
+		goto out;
+
+	if (_IOC_NR(cmd_op) != UBLK_CMD_ADD_DEV) {
 		ret = -ENODEV;
 		ub = ublk_get_device_from_id(header->dev_id);
 		if (!ub)
 			goto out;
 
 		ret = ublk_ctrl_uring_cmd_permission(ub, cmd);
-	} else {
-		/* ADD_DEV permission check is done in command handler */
-		ret = 0;
+		if (ret)
+			goto put_dev;
 	}
 
-	if (ret)
-		goto put_dev;
-
-	switch (cmd->cmd_op) {
+	switch (_IOC_NR(cmd_op)) {
 	case UBLK_CMD_START_DEV:
 		ret = ublk_ctrl_start_dev(ub, cmd);
 		break;

include/uapi/linux/ublk_cmd.h

@@ -8,6 +8,9 @@
 
 /*
  * Admin commands, issued by ublk server, and handled by ublk driver.
+ *
+ * Legacy command definition, don't use in new application, and don't
+ * add new such definition any more
  */
 #define	UBLK_CMD_GET_QUEUE_AFFINITY	0x01
 #define	UBLK_CMD_GET_DEV_INFO	0x02
@@ -21,6 +24,30 @@
 #define	UBLK_CMD_END_USER_RECOVERY	0x11
 #define	UBLK_CMD_GET_DEV_INFO2		0x12
 
+/* Any new ctrl command should encode by __IO*() */
+#define UBLK_U_CMD_GET_QUEUE_AFFINITY	\
+	_IOR('u', UBLK_CMD_GET_QUEUE_AFFINITY, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_GET_DEV_INFO		\
+	_IOR('u', UBLK_CMD_GET_DEV_INFO, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_ADD_DEV		\
+	_IOWR('u', UBLK_CMD_ADD_DEV, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_DEL_DEV		\
+	_IOWR('u', UBLK_CMD_DEL_DEV, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_START_DEV		\
+	_IOWR('u', UBLK_CMD_START_DEV, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_STOP_DEV		\
+	_IOWR('u', UBLK_CMD_STOP_DEV, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_SET_PARAMS		\
+	_IOWR('u', UBLK_CMD_SET_PARAMS, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_GET_PARAMS		\
+	_IOR('u', UBLK_CMD_GET_PARAMS, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_START_USER_RECOVERY	\
+	_IOWR('u', UBLK_CMD_START_USER_RECOVERY, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_END_USER_RECOVERY	\
+	_IOWR('u', UBLK_CMD_END_USER_RECOVERY, struct ublksrv_ctrl_cmd)
+#define UBLK_U_CMD_GET_DEV_INFO2	\
+	_IOR('u', UBLK_CMD_GET_DEV_INFO2, struct ublksrv_ctrl_cmd)
+
 /*
  * IO commands, issued by ublk server, and handled by ublk driver.
  *
@@ -41,10 +68,23 @@
  *      It is only used if ublksrv set UBLK_F_NEED_GET_DATA flag
  *      while starting a ublk device.
  */
+
+/*
+ * Legacy IO command definition, don't use in new application, and don't
+ * add new such definition any more
+ */
 #define	UBLK_IO_FETCH_REQ		0x20
 #define	UBLK_IO_COMMIT_AND_FETCH_REQ	0x21
 #define	UBLK_IO_NEED_GET_DATA	0x22
 
+/* Any new IO command should encode by __IOWR() */
+#define	UBLK_U_IO_FETCH_REQ		\
+	_IOWR('u', UBLK_IO_FETCH_REQ, struct ublksrv_io_cmd)
+#define	UBLK_U_IO_COMMIT_AND_FETCH_REQ	\
+	_IOWR('u', UBLK_IO_COMMIT_AND_FETCH_REQ, struct ublksrv_io_cmd)
+#define	UBLK_U_IO_NEED_GET_DATA		\
+	_IOWR('u', UBLK_IO_NEED_GET_DATA, struct ublksrv_io_cmd)
+
 /* only ABORT means that no re-fetch */
 #define UBLK_IO_RES_OK			0
 #define UBLK_IO_RES_NEED_GET_DATA	1
@@ -102,6 +142,9 @@
  */
 #define UBLK_F_UNPRIVILEGED_DEV	(1UL << 5)
 
+/* use ioctl encoding for uring command */
+#define UBLK_F_CMD_IOCTL_ENCODE	(1UL << 6)
+
 /* device state */
 #define UBLK_S_DEV_DEAD	0
 #define UBLK_S_DEV_LIVE	1