Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Fix watchdog makefile #4

Closed
wants to merge 1 commit into from

Conversation

Cinerar
Copy link

@Cinerar Cinerar commented May 25, 2018

-Fix makefile
-Fix kvim_defconfig to compile gxbb_wdt as module

Fix kvim_defconfig to compile gxbb_wdt as module
@numbqq
Copy link
Owner

numbqq commented Jun 1, 2018

This bas been fixed. Thanks you.

@Cinerar Cinerar closed this Jun 2, 2018
numbqq pushed a commit that referenced this pull request Jul 24, 2018
[ Upstream commit d754941 ]

If, for any reason, userland shuts down iscsi transport interfaces
before proper logouts - like when logging in to LUNs manually, without
logging out on server shutdown, or when automated scripts can't
umount/logout from logged LUNs - kernel will hang forever on its
sd_sync_cache() logic, after issuing the SYNCHRONIZE_CACHE cmd to all
still existent paths.

PID: 1 TASK: ffff8801a69b8000 CPU: 1 COMMAND: "systemd-shutdow"
 #0 [ffff8801a69c3a30] __schedule at ffffffff8183e9ee
 #1 [ffff8801a69c3a80] schedule at ffffffff8183f0d5
 #2 [ffff8801a69c3a98] schedule_timeout at ffffffff81842199
 #3 [ffff8801a69c3b40] io_schedule_timeout at ffffffff8183e604
 #4 [ffff8801a69c3b70] wait_for_completion_io_timeout at ffffffff8183fc6c
 khadas#5 [ffff8801a69c3bd0] blk_execute_rq at ffffffff813cfe10
 khadas#6 [ffff8801a69c3c88] scsi_execute at ffffffff815c3fc7
 khadas#7 [ffff8801a69c3cc8] scsi_execute_req_flags at ffffffff815c60fe
 khadas#8 [ffff8801a69c3d30] sd_sync_cache at ffffffff815d37d7
 khadas#9 [ffff8801a69c3da8] sd_shutdown at ffffffff815d3c3c

This happens because iscsi_eh_cmd_timed_out(), the transport layer
timeout helper, would tell the queue timeout function (scsi_times_out)
to reset the request timer over and over, until the session state is
back to logged in state. Unfortunately, during server shutdown, this
might never happen again.

Other option would be "not to handle" the issue in the transport
layer. That would trigger the error handler logic, which would also need
the session state to be logged in again.

Best option, for such case, is to tell upper layers that the command was
handled during the transport layer error handler helper, marking it as
DID_NO_CONNECT, which will allow completion and inform about the
problem.

After the session was marked as ISCSI_STATE_FAILED, due to the first
timeout during the server shutdown phase, all subsequent cmds will fail
to be queued, allowing upper logic to fail faster.

Signed-off-by: Rafael David Tinoco <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Jul 25, 2018
commit 3d88d56 upstream.

Due to how the MONOTONIC_RAW accumulation logic was handled,
there is the potential for a 1ns discontinuity when we do
accumulations. This small discontinuity has for the most part
gone un-noticed, but since ARM64 enabled CLOCK_MONOTONIC_RAW
in their vDSO clock_gettime implementation, we've seen failures
with the inconsistency-check test in kselftest.

This patch addresses the issue by using the same sub-ns
accumulation handling that CLOCK_MONOTONIC uses, which avoids
the issue for in-kernel users.

Since the ARM64 vDSO implementation has its own clock_gettime
calculation logic, this patch reduces the frequency of errors,
but failures are still seen. The ARM64 vDSO will need to be
updated to include the sub-nanosecond xtime_nsec values in its
calculation for this issue to be completely fixed.

Signed-off-by: John Stultz <[email protected]>
Tested-by: Daniel Mentz <[email protected]>
Cc: Prarit Bhargava <[email protected]>
Cc: Kevin Brodsky <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: "stable #4 . 8+" <[email protected]>
Cc: Miroslav Lichvar <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
[fabrizio: cherry-pick to 4.4. Kept cycle_t type for function
logarithmic_accumulation local variable "interval". Dropped
casting of "interval" variable]
Signed-off-by: Fabrizio Castro <[email protected]>
Signed-off-by: Biju Das <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Jul 25, 2018
[ Upstream commit 2c0aa08 ]

Scenario:
1. Port down and do fail over
2. Ap do rds_bind syscall

PID: 47039  TASK: ffff89887e2fe640  CPU: 47  COMMAND: "kworker/u:6"
 #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9
 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3
 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518
 #3 [ffff898e35f15b60] no_context at ffffffff8104854c
 #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675
 khadas#5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3
 khadas#6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8
 khadas#7 [ffff898e35f15d10] page_fault at ffffffff8150ea95
    [exception RIP: unknown or invalid address]
    RIP: 0000000000000000  RSP: ffff898e35f15dc8  RFLAGS: 00010282
    RAX: 00000000fffffffe  RBX: ffff889b77f6fc00  RCX:ffffffff81c99d88
    RDX: 0000000000000000  RSI: ffff896019ee08e8  RDI:ffff889b77f6fc00
    RBP: ffff898e35f15df0   R8: ffff896019ee08c8  R9:0000000000000000
    R10: 0000000000000400  R11: 0000000000000000  R12:ffff896019ee08c0
    R13: ffff889b77f6fe68  R14: ffffffff81c99d80  R15: ffffffffa022a1e0
    ORIG_RAX: ffffffffffffffff  CS: 0010 SS: 0018
 khadas#8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm]
 khadas#9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6
 khadas#10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0
 khadas#11 [ffff898e35f15ee8] kthread at ffffffff81090fe6

PID: 45659  TASK: ffff880d313d2500  CPU: 31  COMMAND: "oracle_45659_ap"
 #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4
 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf
 #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7
 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb
 #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm]
 khadas#5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma]
 khadas#6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds]
 khadas#7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds]
 khadas#8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670

PID: 45659                          PID: 47039
rds_ib_laddr_check
  /* create id_priv with a null event_handler */
  rdma_create_id
  rdma_bind_addr
    cma_acquire_dev
      /* add id_priv to cma_dev->id_list */
      cma_attach_to_dev
                                    cma_ndev_work_handler
                                      /* event_hanlder is null */
                                      id_priv->id.event_handler

Signed-off-by: Guanglei Li <[email protected]>
Signed-off-by: Honglei Wang <[email protected]>
Reviewed-by: Junxiao Bi <[email protected]>
Reviewed-by: Yanjun Zhu <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Acked-by: Santosh Shilimkar <[email protected]>
Acked-by: Doug Ledford <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Jul 25, 2018
[ Upstream commit f61e643 ]

As of commit 205e1b7 ("dma-mapping: warn when there is no
coherent_dma_mask") the Freescale FEC driver is issuing the following
warning on driver initialization on ColdFire systems:

WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 0x40159e20
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc7-dirty #4
Stack from 41833dd8:
        41833dd8 40259c53 40025534 40279e26 00000003 00000000 4004e514 41827000
        400255de 40244e42 00000204 40159e20 00000009 00000000 00000000 4024531d
        40159e20 40244e42 00000204 00000000 00000000 00000000 00000007 00000000
        00000000 40279e26 4028d040 40226576 4003ae88 40279e26 418273f6 41833ef8
        7fffffff 418273f2 41867028 4003c9a2 4180ac6c 00000004 41833f8c 4013e71c
        40279e1c 40279e26 40226c16 4013ced2 40279e26 40279e58 4028d040 00000000
Call Trace:
        [<40025534>] 0x40025534
 [<4004e514>] 0x4004e514
 [<400255de>] 0x400255de
 [<40159e20>] 0x40159e20
 [<40159e20>] 0x40159e20

It is not fatal, the driver and the system continue to function normally.

As per the warning the coherent_dma_mask is not set on this device.
There is nothing special about the DMA memory coherency on this hardware
so we can just set the mask to 32bits in the platform data for the FEC
ethernet devices.

Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Jul 25, 2018
[ Upstream commit 2bbea6e ]

when mounting an ISO filesystem sometimes (very rarely)
the system hangs because of a race condition between two tasks.

PID: 6766   TASK: ffff88007b2a6dd0  CPU: 0   COMMAND: "mount"
 #0 [ffff880078447ae0] __schedule at ffffffff8168d605
 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49
 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995
 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef
 #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod]
 khadas#5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50
 khadas#6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3
 khadas#7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs]
 khadas#8 [ffff880078447da8] mount_bdev at ffffffff81202570
 khadas#9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs]
khadas#10 [ffff880078447e28] mount_fs at ffffffff81202d09
khadas#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f
khadas#12 [ffff880078447ea8] do_mount at ffffffff81220fee
khadas#13 [ffff880078447f28] sys_mount at ffffffff812218d6
khadas#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007fd9ea914e9a  RSP: 00007ffd5d9bf648  RFLAGS: 00010246
    RAX: 00000000000000a5  RBX: ffffffff81698c49  RCX: 0000000000000010
    RDX: 00007fd9ec2bc210  RSI: 00007fd9ec2bc290  RDI: 00007fd9ec2bcf30
    RBP: 0000000000000000   R8: 0000000000000000   R9: 0000000000000010
    R10: 00000000c0ed0001  R11: 0000000000000206  R12: 00007fd9ec2bc040
    R13: 00007fd9eb6b2380  R14: 00007fd9ec2bc210  R15: 00007fd9ec2bcf30
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

This task was trying to mount the cdrom.  It allocated and configured a
super_block struct and owned the write-lock for the super_block->s_umount
rwsem. While exclusively owning the s_umount lock, it called
sr_block_ioctl and waited to acquire the global sr_mutex lock.

PID: 6785   TASK: ffff880078720fb0  CPU: 0   COMMAND: "systemd-udevd"
 #0 [ffff880078417898] __schedule at ffffffff8168d605
 #1 [ffff880078417900] schedule at ffffffff8168dc59
 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605
 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838
 #4 [ffff8800784179d0] down_read at ffffffff8168cde0
 khadas#5 [ffff8800784179e8] get_super at ffffffff81201cc7
 khadas#6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de
 khadas#7 [ffff880078417a40] flush_disk at ffffffff8123a94b
 khadas#8 [ffff880078417a88] check_disk_change at ffffffff8123ab50
 khadas#9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom]
khadas#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod]
khadas#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86
khadas#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65
khadas#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b
khadas#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7
khadas#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf
khadas#16 [ffff880078417d00] do_last at ffffffff8120d53d
khadas#17 [ffff880078417db0] path_openat at ffffffff8120e6b2
khadas#18 [ffff880078417e48] do_filp_open at ffffffff8121082b
khadas#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33
khadas#20 [ffff880078417f70] sys_open at ffffffff811fde4e
khadas#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007f29438b0c20  RSP: 00007ffc76624b78  RFLAGS: 00010246
    RAX: 0000000000000002  RBX: ffffffff81698c49  RCX: 0000000000000000
    RDX: 00007f2944a5fa70  RSI: 00000000000a0800  RDI: 00007f2944a5fa70
    RBP: 00007f2944a5f540   R8: 0000000000000000   R9: 0000000000000020
    R10: 00007f2943614c40  R11: 0000000000000246  R12: ffffffff811fde4e
    R13: ffff880078417f78  R14: 000000000000000c  R15: 00007f2944a4b010
    ORIG_RAX: 0000000000000002  CS: 0033  SS: 002b

This task tried to open the cdrom device, the sr_block_open function
acquired the global sr_mutex lock. The call to check_disk_change()
then saw an event flag indicating a possible media change and tried
to flush any cached data for the device.
As part of the flush, it tried to acquire the super_block->s_umount
lock associated with the cdrom device.
This was the same super_block as created and locked by the previous task.

The first task acquires the s_umount lock and then the sr_mutex_lock;
the second task acquires the sr_mutex_lock and then the s_umount lock.

This patch fixes the issue by moving check_disk_change() out of
cdrom_open() and let the caller take care of it.

Signed-off-by: Maurizio Lombardi <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Oct 10, 2018
[ Upstream commit 2c0aa08 ]

Scenario:
1. Port down and do fail over
2. Ap do rds_bind syscall

PID: 47039  TASK: ffff89887e2fe640  CPU: 47  COMMAND: "kworker/u:6"
 #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9
 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3
 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518
 #3 [ffff898e35f15b60] no_context at ffffffff8104854c
 #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675
 khadas#5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3
 khadas#6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8
 khadas#7 [ffff898e35f15d10] page_fault at ffffffff8150ea95
    [exception RIP: unknown or invalid address]
    RIP: 0000000000000000  RSP: ffff898e35f15dc8  RFLAGS: 00010282
    RAX: 00000000fffffffe  RBX: ffff889b77f6fc00  RCX:ffffffff81c99d88
    RDX: 0000000000000000  RSI: ffff896019ee08e8  RDI:ffff889b77f6fc00
    RBP: ffff898e35f15df0   R8: ffff896019ee08c8  R9:0000000000000000
    R10: 0000000000000400  R11: 0000000000000000  R12:ffff896019ee08c0
    R13: ffff889b77f6fe68  R14: ffffffff81c99d80  R15: ffffffffa022a1e0
    ORIG_RAX: ffffffffffffffff  CS: 0010 SS: 0018
 khadas#8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm]
 khadas#9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6
 khadas#10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0
 khadas#11 [ffff898e35f15ee8] kthread at ffffffff81090fe6

PID: 45659  TASK: ffff880d313d2500  CPU: 31  COMMAND: "oracle_45659_ap"
 #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4
 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf
 #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7
 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb
 #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm]
 khadas#5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma]
 khadas#6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds]
 khadas#7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds]
 khadas#8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670

PID: 45659                          PID: 47039
rds_ib_laddr_check
  /* create id_priv with a null event_handler */
  rdma_create_id
  rdma_bind_addr
    cma_acquire_dev
      /* add id_priv to cma_dev->id_list */
      cma_attach_to_dev
                                    cma_ndev_work_handler
                                      /* event_hanlder is null */
                                      id_priv->id.event_handler

Signed-off-by: Guanglei Li <[email protected]>
Signed-off-by: Honglei Wang <[email protected]>
Reviewed-by: Junxiao Bi <[email protected]>
Reviewed-by: Yanjun Zhu <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Acked-by: Santosh Shilimkar <[email protected]>
Acked-by: Doug Ledford <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Oct 10, 2018
[ Upstream commit f61e643 ]

As of commit 205e1b7 ("dma-mapping: warn when there is no
coherent_dma_mask") the Freescale FEC driver is issuing the following
warning on driver initialization on ColdFire systems:

WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 0x40159e20
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc7-dirty #4
Stack from 41833dd8:
        41833dd8 40259c53 40025534 40279e26 00000003 00000000 4004e514 41827000
        400255de 40244e42 00000204 40159e20 00000009 00000000 00000000 4024531d
        40159e20 40244e42 00000204 00000000 00000000 00000000 00000007 00000000
        00000000 40279e26 4028d040 40226576 4003ae88 40279e26 418273f6 41833ef8
        7fffffff 418273f2 41867028 4003c9a2 4180ac6c 00000004 41833f8c 4013e71c
        40279e1c 40279e26 40226c16 4013ced2 40279e26 40279e58 4028d040 00000000
Call Trace:
        [<40025534>] 0x40025534
 [<4004e514>] 0x4004e514
 [<400255de>] 0x400255de
 [<40159e20>] 0x40159e20
 [<40159e20>] 0x40159e20

It is not fatal, the driver and the system continue to function normally.

As per the warning the coherent_dma_mask is not set on this device.
There is nothing special about the DMA memory coherency on this hardware
so we can just set the mask to 32bits in the platform data for the FEC
ethernet devices.

Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Oct 10, 2018
[ Upstream commit 2bbea6e ]

when mounting an ISO filesystem sometimes (very rarely)
the system hangs because of a race condition between two tasks.

PID: 6766   TASK: ffff88007b2a6dd0  CPU: 0   COMMAND: "mount"
 #0 [ffff880078447ae0] __schedule at ffffffff8168d605
 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49
 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995
 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef
 #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod]
 khadas#5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50
 khadas#6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3
 khadas#7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs]
 khadas#8 [ffff880078447da8] mount_bdev at ffffffff81202570
 khadas#9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs]
khadas#10 [ffff880078447e28] mount_fs at ffffffff81202d09
khadas#11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f
khadas#12 [ffff880078447ea8] do_mount at ffffffff81220fee
khadas#13 [ffff880078447f28] sys_mount at ffffffff812218d6
khadas#14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007fd9ea914e9a  RSP: 00007ffd5d9bf648  RFLAGS: 00010246
    RAX: 00000000000000a5  RBX: ffffffff81698c49  RCX: 0000000000000010
    RDX: 00007fd9ec2bc210  RSI: 00007fd9ec2bc290  RDI: 00007fd9ec2bcf30
    RBP: 0000000000000000   R8: 0000000000000000   R9: 0000000000000010
    R10: 00000000c0ed0001  R11: 0000000000000206  R12: 00007fd9ec2bc040
    R13: 00007fd9eb6b2380  R14: 00007fd9ec2bc210  R15: 00007fd9ec2bcf30
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

This task was trying to mount the cdrom.  It allocated and configured a
super_block struct and owned the write-lock for the super_block->s_umount
rwsem. While exclusively owning the s_umount lock, it called
sr_block_ioctl and waited to acquire the global sr_mutex lock.

PID: 6785   TASK: ffff880078720fb0  CPU: 0   COMMAND: "systemd-udevd"
 #0 [ffff880078417898] __schedule at ffffffff8168d605
 #1 [ffff880078417900] schedule at ffffffff8168dc59
 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605
 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838
 #4 [ffff8800784179d0] down_read at ffffffff8168cde0
 khadas#5 [ffff8800784179e8] get_super at ffffffff81201cc7
 khadas#6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de
 khadas#7 [ffff880078417a40] flush_disk at ffffffff8123a94b
 khadas#8 [ffff880078417a88] check_disk_change at ffffffff8123ab50
 khadas#9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom]
khadas#10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod]
khadas#11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86
khadas#12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65
khadas#13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b
khadas#14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7
khadas#15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf
khadas#16 [ffff880078417d00] do_last at ffffffff8120d53d
khadas#17 [ffff880078417db0] path_openat at ffffffff8120e6b2
khadas#18 [ffff880078417e48] do_filp_open at ffffffff8121082b
khadas#19 [ffff880078417f18] do_sys_open at ffffffff811fdd33
khadas#20 [ffff880078417f70] sys_open at ffffffff811fde4e
khadas#21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49
    RIP: 00007f29438b0c20  RSP: 00007ffc76624b78  RFLAGS: 00010246
    RAX: 0000000000000002  RBX: ffffffff81698c49  RCX: 0000000000000000
    RDX: 00007f2944a5fa70  RSI: 00000000000a0800  RDI: 00007f2944a5fa70
    RBP: 00007f2944a5f540   R8: 0000000000000000   R9: 0000000000000020
    R10: 00007f2943614c40  R11: 0000000000000246  R12: ffffffff811fde4e
    R13: ffff880078417f78  R14: 000000000000000c  R15: 00007f2944a4b010
    ORIG_RAX: 0000000000000002  CS: 0033  SS: 002b

This task tried to open the cdrom device, the sr_block_open function
acquired the global sr_mutex lock. The call to check_disk_change()
then saw an event flag indicating a possible media change and tried
to flush any cached data for the device.
As part of the flush, it tried to acquire the super_block->s_umount
lock associated with the cdrom device.
This was the same super_block as created and locked by the previous task.

The first task acquires the s_umount lock and then the sr_mutex_lock;
the second task acquires the sr_mutex_lock and then the s_umount lock.

This patch fixes the issue by moving check_disk_change() out of
cdrom_open() and let the caller take care of it.

Signed-off-by: Maurizio Lombardi <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Oct 10, 2018
commit 89da619 upstream.

Kernel panic when with high memory pressure, calltrace looks like,

PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java"
 #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb
 #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942
 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30
 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8
 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46
 khadas#5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc
 khadas#6 [ffff881ec7ed7838] __node_set at ffffffff81680300
 khadas#7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f
 khadas#8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5
 khadas#9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8
    [exception RIP: _raw_spin_lock_irqsave+47]
    RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046
    RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8
    RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008
    RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098
    R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000
    R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0
    ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018

It happens in the pagefault and results in double pagefault
during compacting pages when memory allocation fails.

Analysed the vmcore, the page leads to second pagefault is corrupted
with _mapcount=-256, but private=0.

It's caused by the race between migration and ballooning, and lock
missing in virtballoon_migratepage() of virtio_balloon driver.
This patch fix the bug.

Fixes: e225042 ("virtio_balloon: introduce migration primitives to balloon pages")
Cc: [email protected]
Signed-off-by: Jiang Biao <[email protected]>
Signed-off-by: Huang Chong <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Jan 3, 2019
commit 3941552 upstream.

Currently the size of hypercall buffers allocated via
/dev/xen/hypercall is limited to a default of 64 memory pages. For live
migration of guests this might be too small as the page dirty bitmask
needs to be sized according to the size of the guest. This means
migrating a 8GB sized guest is already exhausting the default buffer
size for the dirty bitmap.

There is no sensible way to set a sane limit, so just remove it
completely. The device node's usage is limited to root anyway, so there
is no additional DOS scenario added by allowing unlimited buffers.

While at it make the error path for the -ENOMEM case a little bit
cleaner by setting n_pages to the number of successfully allocated
pages instead of the target size.

Fixes: c51b3c6 ("xen: add new hypercall buffer mapping device")
Cc: <[email protected]> #4.18
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Jan 3, 2019
commit c495144 upstream.

We're getting a lockdep splat because we take the dio_sem under the
log_mutex.  What we really need is to protect fsync() from logging an
extent map for an extent we never waited on higher up, so just guard the
whole thing with dio_sem.

======================================================
WARNING: possible circular locking dependency detected
4.18.0-rc4-xfstests-00025-g5de5edbaf1d4 #411 Not tainted
------------------------------------------------------
aio-dio-invalid/30928 is trying to acquire lock:
0000000092621cfd (&mm->mmap_sem){++++}, at: get_user_pages_unlocked+0x5a/0x1e0

but task is already holding lock:
00000000cefe6b35 (&ei->dio_sem){++++}, at: btrfs_direct_IO+0x3be/0x400

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> khadas#5 (&ei->dio_sem){++++}:
       lock_acquire+0xbd/0x220
       down_write+0x51/0xb0
       btrfs_log_changed_extents+0x80/0xa40
       btrfs_log_inode+0xbaf/0x1000
       btrfs_log_inode_parent+0x26f/0xa80
       btrfs_log_dentry_safe+0x50/0x70
       btrfs_sync_file+0x357/0x540
       do_fsync+0x38/0x60
       __ia32_sys_fdatasync+0x12/0x20
       do_fast_syscall_32+0x9a/0x2f0
       entry_SYSENTER_compat+0x84/0x96

-> #4 (&ei->log_mutex){+.+.}:
       lock_acquire+0xbd/0x220
       __mutex_lock+0x86/0xa10
       btrfs_record_unlink_dir+0x2a/0xa0
       btrfs_unlink+0x5a/0xc0
       vfs_unlink+0xb1/0x1a0
       do_unlinkat+0x264/0x2b0
       do_fast_syscall_32+0x9a/0x2f0
       entry_SYSENTER_compat+0x84/0x96

-> #3 (sb_internal#2){.+.+}:
       lock_acquire+0xbd/0x220
       __sb_start_write+0x14d/0x230
       start_transaction+0x3e6/0x590
       btrfs_evict_inode+0x475/0x640
       evict+0xbf/0x1b0
       btrfs_run_delayed_iputs+0x6c/0x90
       cleaner_kthread+0x124/0x1a0
       kthread+0x106/0x140
       ret_from_fork+0x3a/0x50

-> #2 (&fs_info->cleaner_delayed_iput_mutex){+.+.}:
       lock_acquire+0xbd/0x220
       __mutex_lock+0x86/0xa10
       btrfs_alloc_data_chunk_ondemand+0x197/0x530
       btrfs_check_data_free_space+0x4c/0x90
       btrfs_delalloc_reserve_space+0x20/0x60
       btrfs_page_mkwrite+0x87/0x520
       do_page_mkwrite+0x31/0xa0
       __handle_mm_fault+0x799/0xb00
       handle_mm_fault+0x7c/0xe0
       __do_page_fault+0x1d3/0x4a0
       async_page_fault+0x1e/0x30

-> #1 (sb_pagefaults){.+.+}:
       lock_acquire+0xbd/0x220
       __sb_start_write+0x14d/0x230
       btrfs_page_mkwrite+0x6a/0x520
       do_page_mkwrite+0x31/0xa0
       __handle_mm_fault+0x799/0xb00
       handle_mm_fault+0x7c/0xe0
       __do_page_fault+0x1d3/0x4a0
       async_page_fault+0x1e/0x30

-> #0 (&mm->mmap_sem){++++}:
       __lock_acquire+0x42e/0x7a0
       lock_acquire+0xbd/0x220
       down_read+0x48/0xb0
       get_user_pages_unlocked+0x5a/0x1e0
       get_user_pages_fast+0xa4/0x150
       iov_iter_get_pages+0xc3/0x340
       do_direct_IO+0xf93/0x1d70
       __blockdev_direct_IO+0x32d/0x1c20
       btrfs_direct_IO+0x227/0x400
       generic_file_direct_write+0xcf/0x180
       btrfs_file_write_iter+0x308/0x58c
       aio_write+0xf8/0x1d0
       io_submit_one+0x3a9/0x620
       __ia32_compat_sys_io_submit+0xb2/0x270
       do_int80_syscall_32+0x5b/0x1a0
       entry_INT80_compat+0x88/0xa0

other info that might help us debug this:

Chain exists of:
  &mm->mmap_sem --> &ei->log_mutex --> &ei->dio_sem

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&ei->dio_sem);
                               lock(&ei->log_mutex);
                               lock(&ei->dio_sem);
  lock(&mm->mmap_sem);

 *** DEADLOCK ***

1 lock held by aio-dio-invalid/30928:
 #0: 00000000cefe6b35 (&ei->dio_sem){++++}, at: btrfs_direct_IO+0x3be/0x400

stack backtrace:
CPU: 0 PID: 30928 Comm: aio-dio-invalid Not tainted 4.18.0-rc4-xfstests-00025-g5de5edbaf1d4 #411
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Call Trace:
 dump_stack+0x7c/0xbb
 print_circular_bug.isra.37+0x297/0x2a4
 check_prev_add.constprop.45+0x781/0x7a0
 ? __lock_acquire+0x42e/0x7a0
 validate_chain.isra.41+0x7f0/0xb00
 __lock_acquire+0x42e/0x7a0
 lock_acquire+0xbd/0x220
 ? get_user_pages_unlocked+0x5a/0x1e0
 down_read+0x48/0xb0
 ? get_user_pages_unlocked+0x5a/0x1e0
 get_user_pages_unlocked+0x5a/0x1e0
 get_user_pages_fast+0xa4/0x150
 iov_iter_get_pages+0xc3/0x340
 do_direct_IO+0xf93/0x1d70
 ? __alloc_workqueue_key+0x358/0x490
 ? __blockdev_direct_IO+0x14b/0x1c20
 __blockdev_direct_IO+0x32d/0x1c20
 ? btrfs_run_delalloc_work+0x40/0x40
 ? can_nocow_extent+0x490/0x490
 ? kvm_clock_read+0x1f/0x30
 ? can_nocow_extent+0x490/0x490
 ? btrfs_run_delalloc_work+0x40/0x40
 btrfs_direct_IO+0x227/0x400
 ? btrfs_run_delalloc_work+0x40/0x40
 generic_file_direct_write+0xcf/0x180
 btrfs_file_write_iter+0x308/0x58c
 aio_write+0xf8/0x1d0
 ? kvm_clock_read+0x1f/0x30
 ? __might_fault+0x3e/0x90
 io_submit_one+0x3a9/0x620
 ? io_submit_one+0xe5/0x620
 __ia32_compat_sys_io_submit+0xb2/0x270
 do_int80_syscall_32+0x5b/0x1a0
 entry_INT80_compat+0x88/0xa0

CC: [email protected] # 4.14+
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Jan 3, 2019
commit 7c388f9 upstream.

Remove stale debug trace.

Fixes: 1eb42f9 ("qla2xxx: Make trace flags more readable")
Cc: [email protected] #4.10
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Jan 3, 2019
commit 1e4ac5d upstream.

If chip unable to fully initialize, use full shutdown sequence to clear out
any stale FW state.

Fixes: e315cd2 ("[SCSI] qla2xxx: Code changes for qla data structure refactoring")
Cc: [email protected]  #4.10
Signed-off-by: Quinn Tran <[email protected]>
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Jan 3, 2019
commit 6b04114 upstream.

By default NFSv3 doesn't support ACL (Access Control Lists)
which might be quite convenient to have so that
mounted NFS behaves exactly as any other local file-system.

In particular missing support of ACL makes umask useless.
This among other thigs fixes Glibc's "nptl/tst-umask1".

Signed-off-by: Alexey Brodkin <[email protected]>
Cc: Cupertino Miranda <[email protected]>
Cc: [email protected]	#4.14+
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Jul 27, 2019
…text

commit 0c9e8b3 upstream.

stub_probe() and stub_disconnect() call functions which could call
sleeping function in invalid context whil holding busid_lock.

Fix the problem by refining the lock holds to short critical sections
to change the busid_priv fields. This fix restructures the code to
limit the lock holds in stub_probe() and stub_disconnect().

stub_probe():

[15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418
[15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip
[15217.927044] 5 locks held by usbip/29087:
[15217.927047]  #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0
[15217.927062]  #1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0
[15217.927072]  #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50
[15217.927082]  #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50
[15217.927090]  #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host]
[15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G        W         5.1.0-rc6+ khadas#40
[15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013
[15217.927109] Call Trace:
[15217.927118]  dump_stack+0x63/0x85
[15217.927127]  ___might_sleep+0xff/0x120
[15217.927133]  __might_sleep+0x4a/0x80
[15217.927143]  kmem_cache_alloc_trace+0x1aa/0x210
[15217.927156]  stub_probe+0xe8/0x440 [usbip_host]
[15217.927171]  usb_probe_device+0x34/0x70

stub_disconnect():

[15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip
[15279.182492] 5 locks held by usbip/29114:
[15279.182494]  #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0
[15279.182506]  #1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0
[15279.182514]  #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50
[15279.182522]  #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50
[15279.182529]  #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host]
[15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G        W         5.1.0-rc6+ khadas#40
[15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013
[15279.182546] Call Trace:
[15279.182554]  dump_stack+0x63/0x85
[15279.182561]  ___might_sleep+0xff/0x120
[15279.182566]  __might_sleep+0x4a/0x80
[15279.182574]  __mutex_lock+0x55/0x950
[15279.182582]  ? get_busid_priv+0x48/0x60 [usbip_host]
[15279.182587]  ? reacquire_held_locks+0xec/0x1a0
[15279.182591]  ? get_busid_priv+0x48/0x60 [usbip_host]
[15279.182597]  ? find_held_lock+0x94/0xa0
[15279.182609]  mutex_lock_nested+0x1b/0x20
[15279.182614]  ? mutex_lock_nested+0x1b/0x20
[15279.182618]  kernfs_remove_by_name_ns+0x2a/0x90
[15279.182625]  sysfs_remove_file_ns+0x15/0x20
[15279.182629]  device_remove_file+0x19/0x20
[15279.182634]  stub_disconnect+0x6d/0x180 [usbip_host]
[15279.182643]  usb_unbind_device+0x27/0x60

Signed-off-by: Shuah Khan <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Jul 27, 2019
[ Upstream commit 689a586 ]

Memory: 509108K/542612K available (3835K kernel code, 919K rwdata, 1028K rodata, 129K init, 211K bss, 33504K reserved, 0K cma-reserved)
NR_IRQS: 15
clocksource: timer: mask: 0xffffffffffffffff max_cycles: 0x1cd42e205, max_idle_ns: 881590404426 ns
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:458 clockevents_register_device+0x72/0x140
posix-timer cpumask == cpu_all_mask, using cpu_possible_mask instead
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc4-00048-ged79cc87302b #4
Stack:
 604ebda0 603c5370 604ebe20 6046fd17
 00000000 6006fcbb 604ebdb0 603c53b5
 604ebe10 6003bfc4 604ebdd0 9000001ca
Call Trace:
 [<6006fcbb>] ? printk+0x0/0x94
 [<60083160>] ? clockevents_register_device+0x72/0x140
 [<6001f16e>] show_stack+0x13b/0x155
 [<603c5370>] ? dump_stack_print_info+0xe2/0xeb
 [<6006fcbb>] ? printk+0x0/0x94
 [<603c53b5>] dump_stack+0x2a/0x2c
 [<6003bfc4>] __warn+0x10e/0x13e
 [<60070320>] ? vprintk_func+0xc8/0xcf
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<6003c08b>] warn_slowpath_fmt+0x97/0x99
 [<600311a1>] ? set_signals+0x0/0x3f
 [<6003bff4>] ? warn_slowpath_fmt+0x0/0x99
 [<600842cb>] ? tick_oneshot_mode_active+0x44/0x4f
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<6007d2d5>] ? __clocksource_select+0x20/0x1b1
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<60083160>] clockevents_register_device+0x72/0x140
 [<60031192>] ? get_signals+0x0/0xf
 [<60030fd6>] ? block_signals+0x0/0x16
 [<6006fcbb>] ? printk+0x0/0x94
 [<60002eec>] um_timer_setup+0xc8/0xca
 [<60001b59>] start_kernel+0x47f/0x57e
 [<600035bc>] start_kernel_proc+0x49/0x4d
 [<6006c483>] ? kmsg_dump_register+0x82/0x8a
 [<6001de62>] new_thread_handler+0x81/0xb2
 [<60003571>] ? kmsg_dumper_stdout_init+0x1a/0x1c
 [<60020c75>] uml_finishsetup+0x54/0x59

random: get_random_bytes called from init_oops_id+0x27/0x34 with crng_init=0
---[ end trace 00173d0117a88acb ]---
Calibrating delay loop... 6941.90 BogoMIPS (lpj=34709504)

Signed-off-by: Maciej Żenczykowski <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: [email protected]
Cc: [email protected]

Signed-off-by: Richard Weinberger <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this pull request Jul 27, 2019
[ Upstream commit 5518424 ]

ifmsh->csa is an RCU-protected pointer. The writer context
in ieee80211_mesh_finish_csa() is already mutually
exclusive with wdev->sdata.mtx, but the RCU checker did
not know this. Use rcu_dereference_protected() to avoid a
warning.

fixes the following warning:

[   12.519089] =============================
[   12.520042] WARNING: suspicious RCU usage
[   12.520652] 5.1.0-rc7-wt+ khadas#16 Tainted: G        W
[   12.521409] -----------------------------
[   12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage!
[   12.522928] other info that might help us debug this:
[   12.523984] rcu_scheduler_active = 2, debug_locks = 1
[   12.524855] 5 locks held by kworker/u8:2/152:
[   12.525438]  #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620
[   12.526607]  #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620
[   12.528001]  #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90
[   12.529116]  #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90
[   12.530233]  #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90

Signed-off-by: Thomas Pedersen <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this pull request Aug 30, 2019
commit 5e3cc1e upstream.

Use inode->i_lock to protect i_size_write(), else i_size_read() in
generic_fillattr() may loop infinitely in read_seqcount_begin() when
multiple processes invoke v9fs_vfs_getattr() or v9fs_vfs_getattr_dotl()
simultaneously under 32-bit SMP environment, and a soft lockup will be
triggered as show below:

  watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [stat:2217]
  Modules linked in:
  CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
  Hardware name: Generic DT based system
  PC is at generic_fillattr+0x104/0x108
  LR is at 0xec497f00
  pc : [<802b8898>]    lr : [<ec497f00>]    psr: 200c0013
  sp : ec497e20  ip : ed608030  fp : ec497e3c
  r10: 00000000  r9 : ec497f00  r8 : ed608030
  r7 : ec497ebc  r6 : ec497f00  r5 : ee5c1550  r4 : ee005780
  r3 : 0000052d  r2 : 00000000  r1 : ec497f00  r0 : ed608030
  Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
  Control: 10c5387d  Table: ac48006a  DAC: 00000051
  CPU: 5 PID: 2217 Comm: stat Not tainted 5.0.0-rc1-00005-g7f702faf5a9e #4
  Hardware name: Generic DT based system
  Backtrace:
  [<8010d974>] (dump_backtrace) from [<8010dc88>] (show_stack+0x20/0x24)
  [<8010dc68>] (show_stack) from [<80a1d194>] (dump_stack+0xb0/0xdc)
  [<80a1d0e4>] (dump_stack) from [<80109f34>] (show_regs+0x1c/0x20)
  [<80109f18>] (show_regs) from [<801d0a80>] (watchdog_timer_fn+0x280/0x2f8)
  [<801d0800>] (watchdog_timer_fn) from [<80198658>] (__hrtimer_run_queues+0x18c/0x380)
  [<801984cc>] (__hrtimer_run_queues) from [<80198e60>] (hrtimer_run_queues+0xb8/0xf0)
  [<80198da8>] (hrtimer_run_queues) from [<801973e8>] (run_local_timers+0x28/0x64)
  [<801973c0>] (run_local_timers) from [<80197460>] (update_process_times+0x3c/0x6c)
  [<80197424>] (update_process_times) from [<801ab2b8>] (tick_nohz_handler+0xe0/0x1bc)
  [<801ab1d8>] (tick_nohz_handler) from [<80843050>] (arch_timer_handler_virt+0x38/0x48)
  [<80843018>] (arch_timer_handler_virt) from [<80180a64>] (handle_percpu_devid_irq+0x8c/0x240)
  [<801809d8>] (handle_percpu_devid_irq) from [<8017ac20>] (generic_handle_irq+0x34/0x44)
  [<8017abec>] (generic_handle_irq) from [<8017b344>] (__handle_domain_irq+0x6c/0xc4)
  [<8017b2d8>] (__handle_domain_irq) from [<801022e0>] (gic_handle_irq+0x4c/0x88)
  [<80102294>] (gic_handle_irq) from [<80101a30>] (__irq_svc+0x70/0x98)
  [<802b8794>] (generic_fillattr) from [<8056b284>] (v9fs_vfs_getattr_dotl+0x74/0xa4)
  [<8056b210>] (v9fs_vfs_getattr_dotl) from [<802b8904>] (vfs_getattr_nosec+0x68/0x7c)
  [<802b889c>] (vfs_getattr_nosec) from [<802b895c>] (vfs_getattr+0x44/0x48)
  [<802b8918>] (vfs_getattr) from [<802b8a74>] (vfs_statx+0x9c/0xec)
  [<802b89d8>] (vfs_statx) from [<802b9428>] (sys_lstat64+0x48/0x78)
  [<802b93e0>] (sys_lstat64) from [<80101000>] (ret_fast_syscall+0x0/0x28)

[[email protected]: updated comment to not refer to a function
in another subsystem]
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 7549ae3 ("9p: Use the i_size_[read, write]() macros instead of using inode->i_size directly.")
Reported-by: Xing Gaopeng <[email protected]>
Signed-off-by: Hou Tao <[email protected]>
Signed-off-by: Dominique Martinet <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Aug 30, 2019
commit 6bd2885 upstream.

Debug exception handlers may be called for exceptions generated both by
user and kernel code. In many cases, this is checked explicitly, but
in other cases things either happen to work by happy accident or they
go slightly wrong. For example, executing 'brk #4' from userspace will
enter the kprobes code and be ignored, but the instruction will be
retried forever in userspace instead of delivering a SIGTRAP.

Fix this issue in the most stable-friendly fashion by simply adding
explicit checks of the triggering exception level to all of our debug
exception handlers.

Cc: <[email protected]>
Reviewed-by: Mark Rutland <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Aug 30, 2019
[ Upstream commit 42dfa45 ]

Using gcc's ASan, Changbin reports:

  =================================================================
  ==7494==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 48 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x5625e5330a5e in zalloc util/util.h:23
      #2 0x5625e5330a9b in perf_counts__new util/counts.c:10
      #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
      #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
      khadas#5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
      khadas#6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
      khadas#7 0x5625e51528e6 in run_test tests/builtin-test.c:358
      khadas#8 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      khadas#9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      khadas#10 0x5625e515572f in cmd_test tests/builtin-test.c:722
      khadas#11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      khadas#12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      khadas#13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      khadas#14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      khadas#15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  Indirect leak of 72 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x5625e532560d in zalloc util/util.h:23
      #2 0x5625e532566b in xyarray__new util/xyarray.c:10
      #3 0x5625e5330aba in perf_counts__new util/counts.c:15
      #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47
      khadas#5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505
      khadas#6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347
      khadas#7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47
      khadas#8 0x5625e51528e6 in run_test tests/builtin-test.c:358
      khadas#9 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      khadas#10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      khadas#11 0x5625e515572f in cmd_test tests/builtin-test.c:722
      khadas#12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      khadas#13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      khadas#14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      khadas#15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      khadas#16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

His patch took care of evsel->prev_raw_counts, but the above backtraces
are about evsel->counts, so fix that instead.

Reported-by: Changbin Du <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Link: https://lkml.kernel.org/n/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this pull request Aug 30, 2019
…_event_on_all_cpus test

[ Upstream commit 93faa52 ]

  =================================================================
  ==7497==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 40 byte(s) in 1 object(s) allocated from:
      #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
      #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45
      #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103
      #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120
      #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135
      khadas#5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36
      khadas#6 0x5625e51528e6 in run_test tests/builtin-test.c:358
      khadas#7 0x5625e5152baf in test_and_print tests/builtin-test.c:388
      khadas#8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583
      khadas#9 0x5625e515572f in cmd_test tests/builtin-test.c:722
      khadas#10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      khadas#11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      khadas#12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      khadas#13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520
      khadas#14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

Signed-off-by: Changbin Du <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Fixes: f30a79b ("perf tools: Add reference counting for cpu_map object")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this pull request Aug 30, 2019
[ Upstream commit d982b33 ]

  =================================================================
  ==20875==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 1160 byte(s) in 1 object(s) allocated from:
      #0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
      #1 0x55bd50005599 in zalloc util/util.h:23
      #2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327
      #3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216
      #4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69
      khadas#5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358
      khadas#6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388
      khadas#7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583
      khadas#8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722
      khadas#9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
      khadas#10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
      khadas#11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
      khadas#12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520
      khadas#13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)

  Indirect leak of 19 byte(s) in 1 object(s) allocated from:
      #0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
      #1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f)

Signed-off-by: Changbin Du <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Steven Rostedt (VMware) <[email protected]>
Fixes: 6a6cd11 ("perf test: Add test for the sched tracepoint format fields")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this pull request Aug 30, 2019
commit 0c7d37f upstream.

The base value in do_div() called by hpet_time_div() is truncated from
unsigned long to uint32_t, resulting in a divide-by-zero exception.

UBSAN: Undefined behaviour in ../drivers/char/hpet.c:572:2
division by zero
CPU: 1 PID: 23682 Comm: syz-executor.3 Not tainted 4.4.184.x86_64+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
 0000000000000000 b573382df1853d00 ffff8800a3287b98 ffffffff81ad7561
 ffff8800a3287c00 ffffffff838b35b0 ffffffff838b3860 ffff8800a3287c20
 0000000000000000 ffff8800a3287bb0 ffffffff81b8f25e ffffffff838b35a0
Call Trace:
 [<ffffffff81ad7561>] __dump_stack lib/dump_stack.c:15 [inline]
 [<ffffffff81ad7561>] dump_stack+0xc1/0x120 lib/dump_stack.c:51
 [<ffffffff81b8f25e>] ubsan_epilogue+0x12/0x8d lib/ubsan.c:166
 [<ffffffff81b900cb>] __ubsan_handle_divrem_overflow+0x282/0x2c8 lib/ubsan.c:262
 [<ffffffff823560dd>] hpet_time_div drivers/char/hpet.c:572 [inline]
 [<ffffffff823560dd>] hpet_ioctl_common drivers/char/hpet.c:663 [inline]
 [<ffffffff823560dd>] hpet_ioctl_common.cold+0xa8/0xad drivers/char/hpet.c:577
 [<ffffffff81e63d56>] hpet_ioctl+0xc6/0x180 drivers/char/hpet.c:676
 [<ffffffff81711590>] vfs_ioctl fs/ioctl.c:43 [inline]
 [<ffffffff81711590>] file_ioctl fs/ioctl.c:470 [inline]
 [<ffffffff81711590>] do_vfs_ioctl+0x6e0/0xf70 fs/ioctl.c:605
 [<ffffffff81711eb4>] SYSC_ioctl fs/ioctl.c:622 [inline]
 [<ffffffff81711eb4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:613
 [<ffffffff82846003>] tracesys_phase2+0x90/0x95

The main C reproducer autogenerated by syzkaller,

  syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
  memcpy((void*)0x20000100, "/dev/hpet\000", 10);
  syscall(__NR_openat, 0xffffffffffffff9c, 0x20000100, 0, 0);
  syscall(__NR_ioctl, r[0], 0x40086806, 0x40000000000000);

Fix it by using div64_ul().

Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Zhang HongJun <[email protected]>
Cc: stable <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Dec 12, 2019
commit cf3591e upstream.

Revert the commit bd293d0. The proper
fix has been made available with commit d0a255e ("loop: set
PF_MEMALLOC_NOIO for the worker thread").

Note that the fix offered by commit bd293d0 doesn't really prevent
the deadlock from occuring - if we look at the stacktrace reported by
Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex -
i.e. it has already successfully taken the mutex. Changing the mutex
from mutex_lock to mutex_trylock won't help with deadlocks that happen
afterwards.

PID: 474    TASK: ffff8813e11f4600  CPU: 10  COMMAND: "kswapd0"
   #0 [ffff8813dedfb938] __schedule at ffffffff8173f405
   #1 [ffff8813dedfb990] schedule at ffffffff8173fa27
   #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec
   #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186
   #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f
   khadas#5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8
   khadas#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81
   khadas#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio]
   khadas#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio]
   khadas#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio]
  khadas#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce
  khadas#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778
  khadas#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f
  khadas#13 [ffff8813dedfbec0] kthread at ffffffff810a8428
  khadas#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242

Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
Fixes: bd293d0 ("dm bufio: fix deadlock with loop device")
Depends-on: d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread")
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Dec 12, 2019
commit ba03a9b upstream.

Francois reported that VMware balloon gets stuck after a balloon reset,
when the VMCI doorbell is removed. A similar error can occur when the
balloon driver is removed with the following splat:

[ 1088.622000] INFO: task modprobe:3565 blocked for more than 120 seconds.
[ 1088.622035]       Tainted: G        W         5.2.0 #4
[ 1088.622087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1088.622205] modprobe        D    0  3565   1450 0x00000000
[ 1088.622210] Call Trace:
[ 1088.622246]  __schedule+0x2a8/0x690
[ 1088.622248]  schedule+0x2d/0x90
[ 1088.622250]  schedule_timeout+0x1d3/0x2f0
[ 1088.622252]  wait_for_completion+0xba/0x140
[ 1088.622320]  ? wake_up_q+0x80/0x80
[ 1088.622370]  vmci_resource_remove+0xb9/0xc0 [vmw_vmci]
[ 1088.622373]  vmci_doorbell_destroy+0x9e/0xd0 [vmw_vmci]
[ 1088.622379]  vmballoon_vmci_cleanup+0x6e/0xf0 [vmw_balloon]
[ 1088.622381]  vmballoon_exit+0x18/0xcc8 [vmw_balloon]
[ 1088.622394]  __x64_sys_delete_module+0x146/0x280
[ 1088.622408]  do_syscall_64+0x5a/0x130
[ 1088.622410]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1088.622415] RIP: 0033:0x7f54f62791b7
[ 1088.622421] Code: Bad RIP value.
[ 1088.622421] RSP: 002b:00007fff2a949008 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 1088.622426] RAX: ffffffffffffffda RBX: 000055dff8b55d00 RCX: 00007f54f62791b7
[ 1088.622426] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055dff8b55d68
[ 1088.622427] RBP: 000055dff8b55d00 R08: 00007fff2a947fb1 R09: 0000000000000000
[ 1088.622427] R10: 00007f54f62f5cc0 R11: 0000000000000206 R12: 000055dff8b55d68
[ 1088.622428] R13: 0000000000000001 R14: 000055dff8b55d68 R15: 00007fff2a94a3f0

The cause for the bug is that when the "delayed" doorbell is invoked, it
takes a reference on the doorbell entry and schedules work that is
supposed to run the appropriate code and drop the doorbell entry
reference. The code ignores the fact that if the work is already queued,
it will not be scheduled to run one more time. As a result one of the
references would not be dropped. When the code waits for the reference
to get to zero, during balloon reset or module removal, it gets stuck.

Fix it. Drop the reference if schedule_work() indicates that the work is
already queued.

Note that this bug got more apparent (or apparent at all) due to
commit ce66433 ("vmw_balloon: VMCI_DOORBELL_SET does not check status").

Fixes: 83e2ec7 ("VMCI: doorbell implementation.")
Reported-by: Francois Rigault <[email protected]>
Cc: Jorgen Hansen <[email protected]>
Cc: Adit Ranadive <[email protected]>
Cc: Alexios Zavras <[email protected]>
Cc: Vishnu DASA <[email protected]>
Cc: [email protected]
Signed-off-by: Nadav Amit <[email protected]>
Reviewed-by: Vishnu Dasa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Dec 12, 2019
[ Upstream commit af8a85a ]

Calling ceph_buffer_put() in fill_inode() may result in freeing the
i_xattrs.blob buffer while holding the i_ceph_lock.  This can be fixed by
postponing the call until later, when the lock is released.

The following backtrace was triggered by fstests generic/070.

  BUG: sleeping function called from invalid context at mm/vmalloc.c:2283
  in_atomic(): 1, irqs_disabled(): 0, pid: 3852, name: kworker/0:4
  6 locks held by kworker/0:4/3852:
   #0: 000000004270f6bb ((wq_completion)ceph-msgr){+.+.}, at: process_one_work+0x1b8/0x5f0
   #1: 00000000eb420803 ((work_completion)(&(&con->work)->work)){+.+.}, at: process_one_work+0x1b8/0x5f0
   #2: 00000000be1c53a4 (&s->s_mutex){+.+.}, at: dispatch+0x288/0x1476
   #3: 00000000559cb958 (&mdsc->snap_rwsem){++++}, at: dispatch+0x2eb/0x1476
   #4: 000000000d5ebbae (&req->r_fill_mutex){+.+.}, at: dispatch+0x2fc/0x1476
   khadas#5: 00000000a83d0514 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: fill_inode.isra.0+0xf8/0xf70
  CPU: 0 PID: 3852 Comm: kworker/0:4 Not tainted 5.2.0+ #441
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014
  Workqueue: ceph-msgr ceph_con_workfn
  Call Trace:
   dump_stack+0x67/0x90
   ___might_sleep.cold+0x9f/0xb1
   vfree+0x4b/0x60
   ceph_buffer_release+0x1b/0x60
   fill_inode.isra.0+0xa9b/0xf70
   ceph_fill_trace+0x13b/0xc70
   ? dispatch+0x2eb/0x1476
   dispatch+0x320/0x1476
   ? __mutex_unlock_slowpath+0x4d/0x2a0
   ceph_con_workfn+0xc97/0x2ec0
   ? process_one_work+0x1b8/0x5f0
   process_one_work+0x244/0x5f0
   worker_thread+0x4d/0x3e0
   kthread+0x105/0x140
   ? process_one_work+0x5f0/0x5f0
   ? kthread_park+0x90/0x90
   ret_from_fork+0x3a/0x50

Signed-off-by: Luis Henriques <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this pull request Dec 12, 2019
commit 143f6e7 upstream.

7471fb7 ("md/raid6: Fix anomily when recovering a single device in
RAID6.") avoids rereading P when it can be computed from other members.
However, this misses the chance to re-write the right data to P. This
patch sets R5_ReadError if the re-read fails.

Also, when re-read is skipped, we also missed the chance to reset
rdev->read_errors to 0. It can fail the disk when there are many read
errors on P member disk (other disks don't have read error)

V2: upper layer read request don't read parity/Q data. So there is no
need to consider such situation.

This is Reported-by: kbuild test robot <[email protected]>

Fixes: 7471fb7 ("md/raid6: Fix anomily when recovering a single device in RAID6.")
Cc: <[email protected]> #4.4+
Signed-off-by: Xiao Ni <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request Dec 12, 2019
During backport f7eea63 ("KVM: nVMX: handle page fault in vmread"),
there was a mistake the exception reference should be passed to function
kvm_write_guest_virt_system, instead of NULL, other wise, we will get
NULL pointer deref, eg

kvm-unit-test triggered a NULL pointer deref below:
[  948.518437] kvm [24114]: vcpu0, guest rIP: 0x407ef9 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x3, nop
[  949.106464] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[  949.106707] PGD 0 P4D 0
[  949.106872] Oops: 0002 [#1] SMP
[  949.107038] CPU: 2 PID: 24126 Comm: qemu-2.7 Not tainted 4.19.77-pserver #4.19.77-1+feature+daily+update+20191005.1625+a4168bb~deb9
[  949.107283] Hardware name: Dell Inc. Precision Tower 3620/09WH54, BIOS 2.7.3 01/31/2018
[  949.107549] RIP: 0010:kvm_write_guest_virt_system+0x12/0x40 [kvm]
[  949.107719] Code: c0 5d 41 5c 41 5d 41 5e 83 f8 03 41 0f 94 c0 41 c1 e0 02 e9 b0 ed ff ff 0f 1f 44 00 00 48 89 f0 c6 87 59 56 00 00 01 48 89 d6 <49> c7 00 00 00 00 00 89 ca 49 c7 40 08 00 00 00 00 49 c7 40 10 00
[  949.108044] RSP: 0018:ffffb31b0a953cb0 EFLAGS: 00010202
[  949.108216] RAX: 000000000046b4d8 RBX: ffff9e9f415b0000 RCX: 0000000000000008
[  949.108389] RDX: ffffb31b0a953cc0 RSI: ffffb31b0a953cc0 RDI: ffff9e9f415b0000
[  949.108562] RBP: 00000000d2e14928 R08: 0000000000000000 R09: 0000000000000000
[  949.108733] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffffffffc8
[  949.108907] R13: 0000000000000002 R14: ffff9e9f4f26f2e8 R15: 0000000000000000
[  949.109079] FS:  00007eff8694c700(0000) GS:ffff9e9f51a80000(0000) knlGS:0000000031415928
[  949.109318] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  949.109495] CR2: 0000000000000000 CR3: 00000003be53b002 CR4: 00000000003626e0
[  949.109671] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  949.109845] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  949.110017] Call Trace:
[  949.110186]  handle_vmread+0x22b/0x2f0 [kvm_intel]
[  949.110356]  ? vmexit_fill_RSB+0xc/0x30 [kvm_intel]
[  949.110549]  kvm_arch_vcpu_ioctl_run+0xa98/0x1b30 [kvm]
[  949.110725]  ? kvm_vcpu_ioctl+0x388/0x5d0 [kvm]
[  949.110901]  kvm_vcpu_ioctl+0x388/0x5d0 [kvm]
[  949.111072]  do_vfs_ioctl+0xa2/0x620

Signed-off-by: Jack Wang <[email protected]>
Acked-by: Paolo Bonzini <[email protected]>
numbqq pushed a commit that referenced this pull request Dec 12, 2019
[ Upstream commit 0216234 ]

We release wrong pointer on error path in cpu_cache_level__read
function, leading to segfault:

  (gdb) r record ls
  Starting program: /root/perf/tools/perf/perf record ls
  ...
  [ perf record: Woken up 1 times to write data ]
  double free or corruption (out)

  Thread 1 "perf" received signal SIGABRT, Aborted.
  0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6
  (gdb) bt
  #0  0x00007ffff7463798 in raise () from /lib64/power9/libc.so.6
  #1  0x00007ffff7443bac in abort () from /lib64/power9/libc.so.6
  #2  0x00007ffff74af8bc in __libc_message () from /lib64/power9/libc.so.6
  #3  0x00007ffff74b92b8 in malloc_printerr () from /lib64/power9/libc.so.6
  #4  0x00007ffff74bb874 in _int_free () from /lib64/power9/libc.so.6
  khadas#5  0x0000000010271260 in __zfree (ptr=0x7fffffffa0b0) at ../../lib/zalloc..
  khadas#6  0x0000000010139340 in cpu_cache_level__read (cache=0x7fffffffa090, cac..
  khadas#7  0x0000000010143c90 in build_caches (cntp=0x7fffffffa118, size=<optimiz..
  ...

Releasing the proper pointer.

Fixes: 720e98b ("perf tools: Add perf data cache feature")
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]: # v4.6+
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this pull request Dec 12, 2019
[ Upstream commit 443f2d5 ]

Observe a segmentation fault when 'perf stat' is asked to repeat forever
with the interval option.

Without fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
  #           time             counts unit events
       5.000211692  3,13,89,82,34,157      cycles
      10.000380119  1,53,98,52,22,294      cycles
      10.040467280       17,16,79,265      cycles
  Segmentation fault

This problem was only observed when we use forever option aka -r 0 and
works with limited repeats. Calling print_counter with ts being set to
NULL, is not a correct option when interval is set. Hence avoid
print_counter(NULL,..)  if interval is set.

With fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
   #           time             counts unit events
       5.019866622  3,15,14,43,08,697      cycles
      10.039865756  3,15,16,31,95,261      cycles
      10.059950628     1,26,05,47,158      cycles
       5.009902655  3,14,52,62,33,932      cycles
      10.019880228  3,14,52,22,89,154      cycles
      10.030543876       66,90,18,333      cycles
       5.009848281  3,14,51,98,25,437      cycles
      10.029854402  3,15,14,93,04,918      cycles
       5.009834177  3,14,51,95,92,316      cycles

Committer notes:

Did the 'git bisect' to find the cset introducing the problem to add the
Fixes tag below, and at that time the problem reproduced as:

  (gdb) run stat -r0 -I500 sleep 1
  <SNIP>
  Program received signal SIGSEGV, Segmentation fault.
  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  866		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep);
  (gdb) bt
  #0  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  #1  0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938
  #2  0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411
  #3  0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370
  #4  0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429
  khadas#5  0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473
  khadas#6  0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588
  (gdb)

Mostly the same as just before this patch:

  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  964		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
  (gdb) bt
  #0  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  #1  0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670)
      at util/stat-display.c:1172
  #2  0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656
  #3  0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960
  #4  0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310
  khadas#5  0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362
  khadas#6  0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406
  khadas#7  0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531
  (gdb)

Fixes: d4f63a4 ("perf stat: Introduce print_counters function")
Signed-off-by: Srikar Dronamraju <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Ravi Bangoria <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Naveen N. Rao <[email protected]>
Cc: [email protected] # v4.2+
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this pull request May 30, 2020
[ Upstream commit 42ffb0b]

There exists a deadlock with range_cyclic that has existed forever.  If
we loop around with a bio already built we could deadlock with a writer
who has the page locked that we're attempting to write but is waiting on
a page in our bio to be written out.  The task traces are as follows

  PID: 1329874  TASK: ffff889ebcdf3800  CPU: 33  COMMAND: "kworker/u113:5"
   #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f
   #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3
   #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42
   #3 [ffffc900297bb708] __lock_page at ffffffff811f145b
   #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502
   khadas#5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684
   khadas#6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff
   khadas#7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0
   khadas#8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2
   khadas#9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd

  PID: 2167901  TASK: ffff889dc6a59c00  CPU: 14  COMMAND:
  "aio-dio-invalid"
   #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f
   #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3
   #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42
   #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6
   #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7
   khadas#5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359
   khadas#6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933
   khadas#7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8
   khadas#8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d
   khadas#9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032

I used drgn to find the respective pages we were stuck on

page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901
page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874

As you can see the kworker is waiting for bit 0 (PG_locked) on index
7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index
8148.  aio-dio-invalid has 7680, and the kworker epd looks like the
following

  crash> struct extent_page_data ffffc900297bbbb0
  struct extent_page_data {
    bio = 0xffff889f747ed830,
    tree = 0xffff889eed6ba448,
    extent_locked = 0,
    sync_io = 0
  }

Probably worth mentioning as well that it waits for writeback of the
page to complete while holding a lock on it (at prepare_pages()).

Using drgn I walked the bio pages looking for page
0xffffea00fbfc7500 which is the one we're waiting for writeback on

  bio = Object(prog, 'struct bio', address=0xffff889f747ed830)
  for i in range(0, bio.bi_vcnt.value_()):
      bv = bio.bi_io_vec[i]
      if bv.bv_page.value_() == 0xffffea00fbfc7500:
	  print("FOUND IT")

which validated what I suspected.

The fix for this is simple, flush the epd before we loop back around to
the beginning of the file during writeout.

Fixes: b293f02 ("Btrfs: Add writepages support")
CC: [email protected] # 4.4+
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this pull request May 30, 2020
[ Upstream commit 6c5d911 ]

journal_head::b_transaction and journal_head::b_next_transaction could
be accessed concurrently as noticed by KCSAN,

 LTP: starting fsync04
 /dev/zero: Can't open blockdev
 EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem
 EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
 ==================================================================
 BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2]

 write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70:
  __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2]
  __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569
  jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2]
  (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034
  kjournald2+0x13b/0x450 [jbd2]
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68:
  jbd2_write_access_granted+0x1b2/0x250 [jbd2]
  jbd2_write_access_granted at fs/jbd2/transaction.c:1155
  jbd2_journal_get_write_access+0x2c/0x60 [jbd2]
  __ext4_journal_get_write_access+0x50/0x90 [ext4]
  ext4_mb_mark_diskspace_used+0x158/0x620 [ext4]
  ext4_mb_new_blocks+0x54f/0xca0 [ext4]
  ext4_ind_map_blocks+0xc79/0x1b40 [ext4]
  ext4_map_blocks+0x3b4/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block+0x3b/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 5 locks held by fsync04/25724:
  #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260
  #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4]
  #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4]
  #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2]
 irq event stamp: 1407125
 hardirqs last  enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ khadas#7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019

The plain reads are outside of jh->b_state_lock critical section which result
in data races. Fix them by adding pairs of READ|WRITE_ONCE().

Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Qian Cai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
numbqq pushed a commit that referenced this pull request May 30, 2020
commit 9f61419 upstream.

Looks like the dma_sync calls don't do what we want on armv7 either.
Fixes:

  Unable to handle kernel paging request at virtual address 50001000
  pgd = (ptrval)
  [50001000] *pgd=00000000
  Internal error: Oops: 805 [#1] SMP ARM
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc6-00271-g9f159ae07f07 #4
  Hardware name: Freescale i.MX53 (Device Tree Support)
  PC is at v7_dma_clean_range+0x20/0x38
  LR is at __dma_page_cpu_to_dev+0x28/0x90
  pc : [<c011c76c>]    lr : [<c01181c4>]    psr: 20000013
  sp : d80b5a88  ip : de96c000  fp : d840ce6c
  r10: 00000000  r9 : 00000001  r8 : d843e010
  r7 : 00000000  r6 : 00008000  r5 : ddb6c000  r4 : 00000000
  r3 : 0000003f  r2 : 00000040  r1 : 50008000  r0 : 50001000
  Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
  Control: 10c5387d  Table: 70004019  DAC: 00000051
  Process swapper/0 (pid: 1, stack limit = 0x(ptrval))

Signed-off-by: Rob Clark <[email protected]>
Fixes: 3de433c ("drm/msm: Use the correct dma_sync calls in msm_gem")
Tested-by: Fabio Estevam <[email protected]>
Cc: Guenter Roeck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request May 30, 2020
commit e84fe99 upstream.

Without CONFIG_PREEMPT, it can happen that we get soft lockups detected,
e.g., while booting up.

  watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:1]
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0-next-20200331+ #4
  Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
  RIP: __pageblock_pfn_to_page+0x134/0x1c0
  Call Trace:
   set_zone_contiguous+0x56/0x70
   page_alloc_init_late+0x166/0x176
   kernel_init_freeable+0xfa/0x255
   kernel_init+0xa/0x106
   ret_from_fork+0x35/0x40

The issue becomes visible when having a lot of memory (e.g., 4TB)
assigned to a single NUMA node - a system that can easily be created
using QEMU.  Inside VMs on a hypervisor with quite some memory
overcommit, this is fairly easy to trigger.

Signed-off-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Pavel Tatashin <[email protected]>
Reviewed-by: Pankaj Gupta <[email protected]>
Reviewed-by: Baoquan He <[email protected]>
Reviewed-by: Shile Zhang <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Kirill Tkhai <[email protected]>
Cc: Shile Zhang <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Daniel Jordan <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Alexander Duyck <[email protected]>
Cc: Baoquan He <[email protected]>
Cc: Oscar Salvador <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
numbqq pushed a commit that referenced this pull request May 30, 2020
[ Upstream commit 76e7527 ]

Some servers seem to accept connections while booting but never send
the SMBNegotiate response neither close the connection, causing all
processes accessing the share hang on uninterruptible sleep state.

This happens when the cifs_demultiplex_thread detects the server is
unresponsive so releases the socket and start trying to reconnect.
At some point, the faulty server will accept the socket and the TCP
status will be set to NeedNegotiate. The first issued command accessing
the share will start the negotiation (pid 5828 below), but the response
will never arrive so other commands will be blocked waiting on the mutex
(pid 55352).

This patch checks for unresponsive servers also on the negotiate stage
releasing the socket and reconnecting if the response is not received
and checking again the tcp state when the mutex is acquired.

PID: 55352  TASK: ffff880fd6cc02c0  CPU: 0   COMMAND: "ls"
 #0 [ffff880fd9add9f0] schedule at ffffffff81467eb9
 #1 [ffff880fd9addb38] __mutex_lock_slowpath at ffffffff81468fe0
 #2 [ffff880fd9addba8] mutex_lock at ffffffff81468b1a
 #3 [ffff880fd9addbc0] cifs_reconnect_tcon at ffffffffa042f905 [cifs]
 #4 [ffff880fd9addc60] smb_init at ffffffffa042faeb [cifs]
 khadas#5 [ffff880fd9addca0] CIFSSMBQPathInfo at ffffffffa04360b5 [cifs]
 ....

Which is waiting a mutex owned by:

PID: 5828   TASK: ffff880fcc55e400  CPU: 0   COMMAND: "xxxx"
 #0 [ffff880fbfdc19b8] schedule at ffffffff81467eb9
 #1 [ffff880fbfdc1b00] wait_for_response at ffffffffa044f96d [cifs]
 #2 [ffff880fbfdc1b60] SendReceive at ffffffffa04505ce [cifs]
 #3 [ffff880fbfdc1bb0] CIFSSMBNegotiate at ffffffffa0438d79 [cifs]
 #4 [ffff880fbfdc1c50] cifs_negotiate_protocol at ffffffffa043b383 [cifs]
 khadas#5 [ffff880fbfdc1c80] cifs_reconnect_tcon at ffffffffa042f911 [cifs]
 khadas#6 [ffff880fbfdc1d20] smb_init at ffffffffa042faeb [cifs]
 khadas#7 [ffff880fbfdc1d60] CIFSSMBQFSInfo at ffffffffa0434eb0 [cifs]
 ....

Signed-off-by: Samuel Cabrero <[email protected]>
Reviewed-by: Aurélien Aptel <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

2 participants