Merge tag 'v3.18.108' into XOS-8.1

This is the 3.18.108 stable release

* tag 'v3.18.108': (26 commits)
  Linux 3.18.108
  Revert "perf tests: Decompress kernel module before objdump"
  libceph: validate con->state at the top of try_write()
  ASoC: fsl_esai: Fix divisor calculation failure at lower ratio
  scsi: sd: Defer spinning up drive while SANITIZE is in progress
  kobject: don't use WARN for registration failures
  mtd: cfi: cmdset_0002: Do not allow read/write to suspend erase block.
  mtd: cfi: cmdset_0001: Workaround Micron Erase suspend bug.
  mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block.
  ALSA: seq: oss: Fix unbalanced use lock for synth MIDI device
  ALSA: core: Report audio_tstamp in snd_pcm_sync_ptr
  tty: Use __GFP_NOFAIL for tty_ldisc_get()
  tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set
  tty: n_gsm: Fix long delays with control frame timeouts in ADM mode
  virtio_console: free buffers after reset
  virtio: add ability to iterate over vqs
  ALSA: usb-audio: Skip broken EU on Dell dock USB-audio
  USB: Increment wakeup count on remote wakeup.
  usb: core: Add quirk for HP v222w 16GB Mini
  USB: serial: cp210x: add ID for NI USB serial console
  ...

Makefile

@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 18
-SUBLEVEL = 107
+SUBLEVEL = 108
 EXTRAVERSION =
 NAME = Diseased Newt
 

drivers/char/virtio_console.c

@@ -1398,7 +1398,6 @@ static int add_port(struct ports_device *portdev, u32 id)
 {
 	char debugfs_name[16];
 	struct port *port;
-	struct port_buffer *buf;
 	dev_t devt;
 	unsigned int nr_added_bufs;
 	int err;
@@ -1509,8 +1508,6 @@ static int add_port(struct ports_device *portdev, u32 id)
 	return 0;
 
 free_inbufs:
-	while ((buf = virtqueue_detach_unused_buf(port->in_vq)))
-		free_buf(buf, true);
 free_device:
 	device_destroy(pdrvdata.class, port->dev->devt);
 free_cdev:
@@ -1535,34 +1532,14 @@ static void remove_port(struct kref *kref)
 
 static void remove_port_data(struct port *port)
 {
-	struct port_buffer *buf;
-
 	spin_lock_irq(&port->inbuf_lock);
 	/* Remove unused data this port might have received. */
 	discard_port_data(port);
 	spin_unlock_irq(&port->inbuf_lock);
 
-	/* Remove buffers we queued up for the Host to send us data in. */
-	do {
-		spin_lock_irq(&port->inbuf_lock);
-		buf = virtqueue_detach_unused_buf(port->in_vq);
-		spin_unlock_irq(&port->inbuf_lock);
-		if (buf)
-			free_buf(buf, true);
-	} while (buf);
-
 	spin_lock_irq(&port->outvq_lock);
 	reclaim_consumed_buffers(port);
 	spin_unlock_irq(&port->outvq_lock);
-
-	/* Free pending buffers from the out-queue. */
-	do {
-		spin_lock_irq(&port->outvq_lock);
-		buf = virtqueue_detach_unused_buf(port->out_vq);
-		spin_unlock_irq(&port->outvq_lock);
-		if (buf)
-			free_buf(buf, true);
-	} while (buf);
 }
 
 /*
@@ -1783,13 +1760,24 @@ static void control_work_handler(struct work_struct *work)
 	spin_unlock(&portdev->c_ivq_lock);
 }
 
+static void flush_bufs(struct virtqueue *vq, bool can_sleep)
+{
+	struct port_buffer *buf;
+	unsigned int len;
+
+	while ((buf = virtqueue_get_buf(vq, &len)))
+		free_buf(buf, can_sleep);
+}
+
 static void out_intr(struct virtqueue *vq)
 {
 	struct port *port;
 
 	port = find_port_by_vq(vq->vdev->priv, vq);
-	if (!port)
+	if (!port) {
+		flush_bufs(vq, false);
 		return;
+	}
 
 	wake_up_interruptible(&port->waitqueue);
 }
@@ -1800,8 +1788,10 @@ static void in_intr(struct virtqueue *vq)
 	unsigned long flags;
 
 	port = find_port_by_vq(vq->vdev->priv, vq);
-	if (!port)
+	if (!port) {
+		flush_bufs(vq, false);
 		return;
+	}
 
 	spin_lock_irqsave(&port->inbuf_lock, flags);
 	port->inbuf = get_inbuf(port);
@@ -1976,6 +1966,15 @@ static const struct file_operations portdev_fops = {
 
 static void remove_vqs(struct ports_device *portdev)
 {
+	struct virtqueue *vq;
+
+	virtio_device_for_each_vq(portdev->vdev, vq) {
+		struct port_buffer *buf;
+
+		flush_bufs(vq, true);
+		while ((buf = virtqueue_detach_unused_buf(vq)))
+			free_buf(buf, true);
+	}
 	portdev->vdev->config->del_vqs(portdev->vdev);
 	kfree(portdev->in_vqs);
 	kfree(portdev->out_vqs);

drivers/mtd/chips/cfi_cmdset_0001.c

@@ -45,6 +45,7 @@
 #define I82802AB	0x00ad
 #define I82802AC	0x00ac
 #define PF38F4476	0x881c
+#define M28F00AP30	0x8963
 /* STMicroelectronics chips */
 #define M50LPW080       0x002F
 #define M50FLW080A	0x0080
@@ -375,6 +376,17 @@ static void cfi_fixup_major_minor(struct cfi_private *cfi,
 		extp->MinorVersion = '1';
 }
 
+static int cfi_is_micron_28F00AP30(struct cfi_private *cfi, struct flchip *chip)
+{
+	/*
+	 * Micron(was Numonyx) 1Gbit bottom boot are buggy w.r.t
+	 * Erase Supend for their small Erase Blocks(0x8000)
+	 */
+	if (cfi->mfr == CFI_MFR_INTEL && cfi->id == M28F00AP30)
+		return 1;
+	return 0;
+}
+
 static inline struct cfi_pri_intelext *
 read_pri_intelext(struct map_info *map, __u16 adr)
 {
@@ -825,21 +837,30 @@ static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long
 		     (mode == FL_WRITING && (cfip->SuspendCmdSupport & 1))))
 			goto sleep;
 
+		/* Do not allow suspend iff read/write to EB address */
+		if ((adr & chip->in_progress_block_mask) ==
+		    chip->in_progress_block_addr)
+			goto sleep;
+
+		/* do not suspend small EBs, buggy Micron Chips */
+		if (cfi_is_micron_28F00AP30(cfi, chip) &&
+		    (chip->in_progress_block_mask == ~(0x8000-1)))
+			goto sleep;
 
 		/* Erase suspend */
-		map_write(map, CMD(0xB0), adr);
+		map_write(map, CMD(0xB0), chip->in_progress_block_addr);
 
 		/* If the flash has finished erasing, then 'erase suspend'
 		 * appears to make some (28F320) flash devices switch to
 		 * 'read' mode.  Make sure that we switch to 'read status'
 		 * mode so we get the right data. --rmk
 		 */
-		map_write(map, CMD(0x70), adr);
+		map_write(map, CMD(0x70), chip->in_progress_block_addr);
 		chip->oldstate = FL_ERASING;
 		chip->state = FL_ERASE_SUSPENDING;
 		chip->erase_suspended = 1;
 		for (;;) {
-			status = map_read(map, adr);
+			status = map_read(map, chip->in_progress_block_addr);
 			if (map_word_andequal(map, status, status_OK, status_OK))
 			        break;
 
@@ -1035,8 +1056,8 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad
 		   sending the 0x70 (Read Status) command to an erasing
 		   chip and expecting it to be ignored, that's what we
 		   do. */
-		map_write(map, CMD(0xd0), adr);
-		map_write(map, CMD(0x70), adr);
+		map_write(map, CMD(0xd0), chip->in_progress_block_addr);
+		map_write(map, CMD(0x70), chip->in_progress_block_addr);
 		chip->oldstate = FL_READY;
 		chip->state = FL_ERASING;
 		break;
@@ -1927,6 +1948,8 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 	map_write(map, CMD(0xD0), adr);
 	chip->state = FL_ERASING;
 	chip->erase_suspended = 0;
+	chip->in_progress_block_addr = adr;
+	chip->in_progress_block_mask = ~(len - 1);
 
 	ret = INVAL_CACHE_AND_WAIT(map, chip, adr,
 				   adr, len,

drivers/mtd/chips/cfi_cmdset_0002.c

@@ -814,9 +814,10 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr
 		    (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
 			goto sleep;
 
-		/* We could check to see if we're trying to access the sector
-		 * that is currently being erased. However, no user will try
-		 * anything like that so we just wait for the timeout. */
+		/* Do not allow suspend iff read/write to EB address */
+		if ((adr & chip->in_progress_block_mask) ==
+		    chip->in_progress_block_addr)
+			goto sleep;
 
 		/* Erase suspend */
 		/* It's harmless to issue the Erase-Suspend and Erase-Resume
@@ -2265,6 +2266,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
 	chip->state = FL_ERASING;
 	chip->erase_suspended = 0;
 	chip->in_progress_block_addr = adr;
+	chip->in_progress_block_mask = ~(map->size - 1);
 
 	INVALIDATE_CACHE_UDELAY(map, chip,
 				adr, map->size,
@@ -2354,6 +2356,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
 	chip->state = FL_ERASING;
 	chip->erase_suspended = 0;
 	chip->in_progress_block_addr = adr;
+	chip->in_progress_block_mask = ~(len - 1);
 
 	INVALIDATE_CACHE_UDELAY(map, chip,
 				adr, len,

drivers/scsi/sd.c

@@ -1795,6 +1795,8 @@ sd_spinup_disk(struct scsi_disk *sdkp)
 				break;	/* standby */
 			if (sshdr.asc == 4 && sshdr.ascq == 0xc)
 				break;	/* unavailable */
+			if (sshdr.asc == 4 && sshdr.ascq == 0x1b)
+				break;	/* sanitize in progress */
 			/*
 			 * Issue command to spin up drive when not ready
 			 */

drivers/tty/n_gsm.c

@@ -137,6 +137,9 @@ struct gsm_dlci {
 	struct mutex mutex;
 
 	/* Link layer */
+	int mode;
+#define DLCI_MODE_ABM		0	/* Normal Asynchronous Balanced Mode */
+#define DLCI_MODE_ADM		1	/* Asynchronous Disconnected Mode */
 	spinlock_t lock;	/* Protects the internal state */
 	struct timer_list t1;	/* Retransmit timer for SABM and UA */
 	int retries;
@@ -1380,7 +1383,13 @@ static struct gsm_control *gsm_control_send(struct gsm_mux *gsm,
 	ctrl->data = data;
 	ctrl->len = clen;
 	gsm->pending_cmd = ctrl;
-	gsm->cretries = gsm->n2;
+
+	/* If DLCI0 is in ADM mode skip retries, it won't respond */
+	if (gsm->dlci[0]->mode == DLCI_MODE_ADM)
+		gsm->cretries = 1;
+	else
+		gsm->cretries = gsm->n2;
+
 	mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
 	gsm_control_transmit(gsm, ctrl);
 	spin_unlock_irqrestore(&gsm->control_lock, flags);
@@ -1488,6 +1497,7 @@ static void gsm_dlci_t1(unsigned long data)
 			if (debug & 8)
 				pr_info("DLCI %d opening in ADM mode.\n",
 					dlci->addr);
+			dlci->mode = DLCI_MODE_ADM;
 			gsm_dlci_open(dlci);
 		} else {
 			gsm_dlci_close(dlci);
@@ -2882,11 +2892,22 @@ static int gsmtty_modem_update(struct gsm_dlci *dlci, u8 brk)
 static int gsm_carrier_raised(struct tty_port *port)
 {
 	struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
+	struct gsm_mux *gsm = dlci->gsm;
+
 	/* Not yet open so no carrier info */
 	if (dlci->state != DLCI_OPEN)
 		return 0;
 	if (debug & 2)
 		return 1;
+
+	/*
+	 * Basic mode with control channel in ADM mode may not respond
+	 * to CMD_MSC at all and modem_rx is empty.
+	 */
+	if (gsm->encoding == 0 && gsm->dlci[0]->mode == DLCI_MODE_ADM &&
+	    !dlci->modem_rx)
+		return 1;
+
 	return dlci->modem_rx & TIOCM_CD;
 }
 

drivers/tty/tty_ldisc.c

@@ -171,12 +171,11 @@ static struct tty_ldisc *tty_ldisc_get(struct tty_struct *tty, int disc)
 			return ERR_CAST(ldops);
 	}
 
-	ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL);
-	if (ld == NULL) {
-		put_ldops(ldops);
-		return ERR_PTR(-ENOMEM);
-	}
-
+	/*
+	 * There is no way to handle allocation failure of only 16 bytes.
+	 * Let's simplify error handling and save more memory.
+	 */
+	ld = kmalloc(sizeof(struct tty_ldisc), GFP_KERNEL | __GFP_NOFAIL);
 	ld->ops = ldops;
 	ld->tty = tty;
 

drivers/usb/core/hcd.c

@@ -2292,6 +2292,7 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
 
 	spin_lock_irqsave (&hcd_root_hub_lock, flags);
 	if (hcd->rh_registered) {
+		pm_wakeup_event(&hcd->self.root_hub->dev, 0);
 		set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
 		queue_work(pm_wq, &hcd->wakeup_work);
 	}

drivers/usb/core/hub.c

@@ -629,12 +629,17 @@ void usb_wakeup_notification(struct usb_device *hdev,
 		unsigned int portnum)
 {
 	struct usb_hub *hub;
+	struct usb_port *port_dev;
 
 	if (!hdev)
 		return;
 
 	hub = usb_hub_to_struct_hub(hdev);
 	if (hub) {
+		port_dev = hub->ports[portnum - 1];
+		if (port_dev && port_dev->child)
+			pm_wakeup_event(&port_dev->child->dev, 0);
+
 		set_bit(portnum, hub->wakeup_bits);
 		kick_hub_wq(hub);
 	}
@@ -3394,8 +3399,11 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 
 	/* Skip the initial Clear-Suspend step for a remote wakeup */
 	status = hub_port_status(hub, port1, &portstatus, &portchange);
-	if (status == 0 && !port_is_suspended(hub, portstatus))
+	if (status == 0 && !port_is_suspended(hub, portstatus)) {
+		if (portchange & USB_PORT_STAT_C_SUSPEND)
+			pm_wakeup_event(&udev->dev, 0);
 		goto SuspendCleared;
+	}
 
 	/* see 7.1.7.7; affects power usage, but not budgeting */
 	if (hub_is_superspeed(hub->hdev))

drivers/usb/core/quirks.c

@@ -41,6 +41,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x03f0, 0x0701), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },
 
+	/* HP v222w 16GB Mini USB Drive */
+	{ USB_DEVICE(0x03f0, 0x3f40), .driver_info = USB_QUIRK_DELAY_INIT },
+
 	/* Creative SB Audigy 2 NX */
 	{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
 

drivers/usb/serial/cp210x.c

@@ -195,6 +195,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
 	{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
 	{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
+	{ USB_DEVICE(0x3923, 0x7A0B) }, /* National Instruments USB Serial Console */
 	{ USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
 	{ } /* Terminating Entry */
 };

drivers/usb/serial/ftdi_sio.c

@@ -1891,7 +1891,8 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial)
 		return ftdi_jtag_probe(serial);
 
 	if (udev->product &&
-		(!strcmp(udev->product, "BeagleBone/XDS100V2") ||
+		(!strcmp(udev->product, "Arrow USB Blaster") ||
+		 !strcmp(udev->product, "BeagleBone/XDS100V2") ||
 		 !strcmp(udev->product, "SNAP Connect E10")))
 		return ftdi_jtag_probe(serial);
 

drivers/usb/usbip/stub_main.c

@@ -201,7 +201,12 @@ static ssize_t rebind_store(struct device_driver *dev, const char *buf,
 	if (!bid)
 		return -ENODEV;
 
+	/* device_attach() callers should hold parent lock for USB */
+	if (bid->udev->dev.parent)
+		device_lock(bid->udev->dev.parent);
 	ret = device_attach(&bid->udev->dev);
+	if (bid->udev->dev.parent)
+		device_unlock(bid->udev->dev.parent);
 	if (ret < 0) {
 		dev_err(&bid->udev->dev, "rebind failed\n");
 		return ret;

drivers/usb/usbip/usbip_common.h

@@ -248,7 +248,7 @@ enum usbip_side {
 #define	SDEV_EVENT_ERROR_SUBMIT	(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
 #define	SDEV_EVENT_ERROR_MALLOC	(USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE)
 
-#define	VDEV_EVENT_REMOVED	(USBIP_EH_SHUTDOWN | USBIP_EH_BYE)
+#define	VDEV_EVENT_REMOVED (USBIP_EH_SHUTDOWN | USBIP_EH_RESET | USBIP_EH_BYE)
 #define	VDEV_EVENT_DOWN		(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
 #define	VDEV_EVENT_ERROR_TCP	(USBIP_EH_SHUTDOWN | USBIP_EH_RESET)
 #define	VDEV_EVENT_ERROR_MALLOC	(USBIP_EH_SHUTDOWN | USBIP_EH_UNUSABLE)