Updated board configurations after changes in Arduino ESP32 package v3.0.x

BresserWeatherSensorTTN.ino

@@ -123,6 +123,8 @@
 // 20240303 Added evaluation of temp_ok/humidity_ok/rain_ok (#82)
 // 20240325 Added configuration for M5Stack Core2 with M5Stack Module LoRa868
 // 20240606 Replaced ESP32AnalogRead by analogReadMilliVolts()
+//          Updated board configurations after changes in 
+//          Arduino ESP32 package v3.0.X
 //
 // ToDo:
 // - Split this file
@@ -247,9 +249,9 @@
     #define PIN_LMIC_DIO1     LORA_D1
     #define PIN_LMIC_DIO2     LORA_D2
 
-#elif defined(ARDUINO_heltec_wireless_stick) || defined(ARDUINO_heltec_wifi_lora_32_V2)
+#elif defined(ARDUINO_HELTEC_WIRELESS_STICK) || defined(ARDUINO_HELTEC_WIFI_LORA_32_V2)
     // https://github.com/espressif/arduino-esp32/blob/master/variants/heltec_wireless_stick/pins_arduino.h
-    // https://github.com/espressif/arduino-esp32/tree/master/variants/heltec_wifi_lora_32_V2/pins_ardiono.h
+    // https://github.com/espressif/arduino-esp32/blob/master/variants/heltec_wifi_lora_32_V2/pins_arduino.h
     #define PIN_LMIC_NSS      SS
     #define PIN_LMIC_RST      RST_LoRa
     #define PIN_LMIC_DIO0     DIO0
@@ -300,26 +302,33 @@
     #pragma message("ARDUINO_ADAFRUIT_FEATHER_RP2040 defined; assuming RFM95W FeatherWing will be used")
     #pragma message("Required wiring: A to RST, B to DIO1, D to DIO0, E to CS")
 
-#elif defined(FIREBEETLE_ESP32_COVER_LORA)
+#elif defined(ARDUINO_DFROBOT_FIREBEETLE_ESP32) && defined(FIREBEETLE_ESP32_COVER_LORA)
     // https://wiki.dfrobot.com/FireBeetle_ESP32_IOT_Microcontroller(V3.0)__Supports_Wi-Fi_&_Bluetooth__SKU__DFR0478
     // https://wiki.dfrobot.com/FireBeetle_Covers_LoRa_Radio_868MHz_SKU_TEL0125
     #define PIN_LMIC_NSS      27 // D4
     #define PIN_LMIC_RST      25 // D2
     #define PIN_LMIC_DIO0     26 // D3
     #define PIN_LMIC_DIO1      9 // D5
     #define PIN_LMIC_DIO2     cMyLoRaWAN::lmic_pinmap::LMIC_UNUSED_PIN
-    #pragma message("FIREBEETLE_ESP32_COVER_LORA defined; assuming FireBeetle ESP32 with FireBeetle Cover LoRa will be used")
+    #pragma message("ARDUINO_DFROBOT_FIREBEETLE_ESP32 && FIREBEETLE_ESP32_COVER_LORA defined; assuming FireBeetle ESP32 with FireBeetle Cover LoRa will be used")
     #pragma message("Required wiring: D2 to RESET, D3 to DIO0, D4 to CS, D5 to DIO1")
 
-#else
+#elif defined(ARDUINO_DFROBOT_FIREBEETLE_ESP32) && defined(LORAWAN_NODE)
     // LoRaWAN_Node board
     // https://github.com/matthias-bs/LoRaWAN_Node
+    #pragma message("ARDUINO_DFROBOT_FIREBEETLE_ESP32 && LORAWAN_NODE defined; assuming LoRaWAN_Node board will be used")
+    #define PIN_LMIC_NSS      14
+    #define PIN_LMIC_RST      12
+    #define PIN_LMIC_DIO0     4
+    #define PIN_LMIC_DIO1     16
+    #define PIN_LMIC_DIO2     17
+#else
+    #pragma message("Unknown board configuration!")
     #define PIN_LMIC_NSS      14
     #define PIN_LMIC_RST      12
     #define PIN_LMIC_DIO0     4
     #define PIN_LMIC_DIO1     16
     #define PIN_LMIC_DIO2     17
-
 #endif
 
 

BresserWeatherSensorTTNCfg.h

@@ -70,6 +70,8 @@
 // 20240325 Added configuration for M5Stack Core2 with M5Stack Module LoRa868
 // 20240606 Removed workaround for ARDUINO_THINGPULSE_EPULSE_FEATHER
 //          (Now available in arduino-esp32 v3.0.X)
+//          Updated board configurations after changes in 
+//          Arduino ESP32 package v3.0.X
 //
 // Note:
 // Depending on board package file date, either
@@ -93,10 +95,7 @@
 // #define NVS_LOG
 
 //--- Select Board ---
-#if !defined(ARDUINO_TTGO_LoRa32_V1) && !defined(ARDUINO_TTGO_LoRa32_V2) &&               \
-    !defined(ARDUINO_TTGO_LoRa32_v21new) && !defined(ARDUINO_ADAFRUIT_FEATHER_ESP32S2) && \
-    !defined(ARDUINO_FEATHER_ESP32) && !defined(ARDUINO_ADAFRUIT_FEATHER_RP2040) &&       \
-    !defined(ARDUINO_M5STACK_Core2) && !defined(ARDUINO_M5STACK_CORE2)
+#if defined(ARDUINO_DFROBOT_FIREBEETLE_ESP32)
 // Use pinning for LoRaWAN Node
 #define LORAWAN_NODE
 

README.md

@@ -157,9 +157,9 @@ If this is not what you need, you have to switch to Manual Configuration.
    | [LILYGO®TTGO-LORA32 V1](https://github.com/Xinyuan-LilyGo/TTGO-LoRa-Series) | "TTGO LoRa32-OLED" | "TTGO LoRa32 V1 (No TFCard)" | ARDUINO_TTGO_LORA32_V1 | SX1276 (HPD13A) | -   |
    | [LILYGO®TTGO-LORA32 V2](https://github.com/LilyGO/TTGO-LORA32) | "TTGO LoRa32-OLED" | "TTGO LoRa32 V2"             | ARDUINO_TTGO_LoRa32_V2 | SX1276 (HPD13A) | Wire DIO1 to GPIO33 |
    | [LILYGO®TTGO-LORA32 V2.1](https://www.lilygo.cc/products/lora3?variant=42272562282677) | "TTGO LoRa32-OLED" | "TTGO LoRa32 V2.1 (1.6.1)" | ARDUINO_TTGO_LoRa32_v21new |  SX1276 (HPD13A) | - |
-   | [Heltec Wireless Stick](https://heltec.org/project/wireless-stick/) | "Heltec Wireless Stick" | n.a. | ARDUINO_heltec_wireless_stick |  SX1276  | - |
-   | [LoRaWAN_Node](https://github.com/matthias-bs/LoRaWAN_Node)      | "FireBeetle-ESP32" | n.a.                       | ARDUINO_ESP32_DEV -> LORAWAN_NODE     | SX1276 (RFM95W) | -      |
-   | [DFRobot FireBeetle ESP32 IoT Microcontroller](https://www.dfrobot.com/product-1590.html) with [FireBeetle Cover LoRa Radio 868MHz](https://www.dfrobot.com/product-1831.html) | "FireBeetle-ESP32" | n.a.                       | ARDUINO_ESP32_DEV & FIREBEETLE_ESP32_COVER_LORA | SX1276 (LoRa1276) | Wiring on the cover: <br>D2 to RESET<br>D3 to DIO0<br>D4 to CS<br>D5 to DIO1 |
+   | [Heltec Wireless Stick](https://heltec.org/project/wireless-stick/) | "Heltec Wireless Stick" | n.a. | ARDUINO_HELTEC_WIRELESS_STICK |  SX1276  | - |
+   | [LoRaWAN_Node](https://github.com/matthias-bs/LoRaWAN_Node)      | "FireBeetle-ESP32" | n.a.                       | ARDUINO_DFROBOT_FIREBEETLE_ESP32 & **LORAWAN_NODE**     | SX1276 (RFM95W) | -      |
+   | [DFRobot FireBeetle ESP32 IoT Microcontroller](https://www.dfrobot.com/product-1590.html) with [FireBeetle Cover LoRa Radio 868MHz](https://www.dfrobot.com/product-1831.html) | "FireBeetle-ESP32" | n.a.                       | ARDUINO_DFROBOT_FIREBEETLE_ESP32 & **FIREBEETLE_ESP32_COVER_LORA** | SX1276 (LoRa1276) | Wiring on the cover: <br>D2 to RESET<br>D3 to DIO0<br>D4 to CS<br>D5 to DIO1 |
    | [Adafruit Feather ESP32S2 with Adafruit LoRa Radio FeatherWing](https://github.com/matthias-bs/BresserWeatherSensorReceiver#adafruit-feather-esp32s2-with-adafruit-lora-radio-featherwing)                                | "Adafruit Feather ESP32-S2" | n.a.               | ARDUINO_<br>ADAFRUIT_FEATHER_ESP32S2   | SX1276 (RFM95W) | **No Bluetooth available!**<br>Wiring on the Featherwing:<br>E to IRQ<br>D to CS<br>C to RST<br>A to DI01 |
 | [Thingpulse ePulse Feather](https://thingpulse.com/product/epulse-feather-low-power-esp32-development-board/) with [Adafruit LoRa Radio FeatherWing](https://www.adafruit.com/product/3231)     | "Adafruit ESP32 Feather" | n.a.               | ARDUINO_FEATHER_ESP32   | SX1276 (RFM95W) | Wiring on the Featherwing:<br>E to IRQ<br>D to CS<br>C to RST<br>A to DI01 |
 | [M5Stack Core2](https://docs.m5stack.com/en/core/core2) with [M5Stack Module LoRa868](https://docs.m5stack.com/en/module/lora868)   | "M5Core2" | n.a.               | ARDUINO_M5STACK_CORE2   | SX1276 (RA-01H) | Wiring on the LoRa868 Module: <br>DIO1 to GPIO35<br><br>"M5Unified" must be installed <br>`M5.begin()`is called to control power management |