SpiderFab is a quadruped spider robot based on the Spider robot by @regishsu , though not a direct fork. See:
- https://github.com/regishsu/SpiderRobot
- https://www.thingiverse.com/thing:1009659
- http://regishsu.blogspot.tw/2015/07/robot-quadruped-robot-re-design-3-round.html
- Spider robot(quad robot, quadruped)-SG90 by regishsu is licensed under the GNU - GPL license.
- http://creativecommons.org/licenses/GPL/2.0/
The body, legs, original firmware code, and original electronics all come from regishsu. This makes the body a bit wider to accomodate some wider batteries. To do this, the meshes were repaired, and then imported into OpenSCAD for modification. This design also adds a place to mount a 5x7 perfboard on top, and a GDS (Glitter Dispersal System) weapon. Both attach to the top of the widened spider robot's body. I also made the mounts for the servos 1mm taller since the servos I got didn't fit in @regishsu 's design.