Ventilation System

This repository contains the code for a ventilation system that can be used to control the airflow in a building.

Installation

To install the ventilation system, follow these steps:

1. Clone this repository to your local machine.
2. Install the necessary dependencies.
3. Install the necessary hardware, including fans, temp sensor, and control panels.
4. Connect the hardware to a power source and a control system.
5. Load main.py into hardware.
6. Test the system to ensure that it is working properly.

Usage

To use the ventilation system, follow these steps:

1. Run the code.
2. Turn on the system using the control panel.
3. Adjust the airflow to the desired level using the control panel or remote control.
4. Monitor the system to ensure that it is working properly.

Configuration

You can configure the ventilation system by editing the main.py file.

Maintenance

To maintain the ventilation system, follow these steps:

1. Regularly inspect the system for signs of wear or damage.
2. Clean the system as needed to remove dust and debris.
3. Replace any worn or damaged parts.

Troubleshooting

If you encounter any problems with the ventilation system, try the following:

1. Check the control panel for error messages.
2. Check for any blockages in the ducts.
3. Make sure that the power source is working properly.
4. Check the code for any bugs or errors.