A fast SSH mass-scanner, login cracker and banner grabber tool using the python-masscan and shodan module.
Clone the repository, make sure that you have a Python installation, change
into the sshprank directory and install sshprank.
$ git clone [email protected]:noptrix/sshprank.git
$ cd sshprank
$ python3 setup.py install --user[ hacker@blackarch ~ ]$ sshprank -H
__ __
__________/ /_ ____ _________ _____ / /__
/ ___/ ___/ __ \/ __ \/ ___/ __ `/ __ \/ //_/
(__ |__ ) / / / /_/ / / / /_/ / / / / ,<
/____/____/_/ /_/ .___/_/ \__,_/_/ /_/_/|_|
/_/
--== [ by nullsecurity.net ] ==--
usage
sshprank <mode> [opts] | <misc>
modes
-h <host:[ports]> - single host to crack. multiple ports can be seperated
by comma, e.g.: 22,2022,22222 (default port: 22)
-l <file> - list of hosts to crack. format: <host>[:ports]. multiple
ports can be seperated by comma (default port: 22)
-m <opts> [-r <num>] - pass arbitrary masscan opts, portscan given hosts and
crack for logins. found sshd services will be saved to
'sshds.txt' in supported format for '-l' option and
even for '-b'. use '-r' for generating random ipv4
addresses rather than scanning given hosts. these
options are always on: '-sS -oX - --open'.
NOTE: if you intent to use the '--banner' option then
you need to specify '--source-ip <some_ipaddr>' which
is needed by masscan. better check masscan options!
-s <str;page;lim> - search ssh servers using shodan and crack logins.
see examples below. note: you need a better API key
than this one i offer in order to search more than 100
(= 1 page) ssh servers. so if you use this one use
'1' for 'page'.
-b <file> - list of hosts to grab sshd banner from
format: <host>[:ports]. multiple ports can be
seperated by comma (default port: 22)
options
-r <num> - generate <num> random ipv4 addresses, check for open
sshd port and crack for login (only with -m option!)
-c <cmd> - execute this <cmd> on host if login was cracked
-u <user> - single username (default: root)
-U <file> - list of usernames
-p - single password (default: root)
-P <file> - list of passwords
-C <file> - list of user:pass combination
-x <num> - num threads for parallel host crack (default: 20)
-S <num> - num threads for parallel service crack (default: 20)
-X <num> - num threads for parallel login crack (default: 20)
-B <num> - num threads for parallel banner grabbing (default: 70)
-T <sec> - num sec for connect timeout (default: 5s)
-R <sec> - num sec for (banner) read timeout (default: 3s)
-o <file> - write found logins to file. format:
<host>:<port>:<user>:<pass> (default: owned.txt)
-e - exit after first login was found. continue with other
hosts instead (default: off)
-v - verbose mode. show found logins, sshds, etc.
(default: off)
misc
-H - print help
-V - print version information
examples
# crack targets from a given list with user admin, pw-list and 20 host-threads
$ sshprank -l sshds.txt -u admin -P /tmp/passlist.txt -x 20
# first scan then crack from founds ssh services using 'root:admin'
$ sudo sshprank -m '-p22,2022 --rate 5000 --source-ip 192.168.13.37 \
--range 192.168.13.1/24' -p admin
# generate 1k random ipv4 addresses, then port-scan (tcp/22 here) with 1k p/s
# and crack logins using 'root:root' on found sshds
$ sudo sshprank -m '-p22 --rate=1000' -r 1000 -v
# search 50 ssh servers via shodan and crack logins using 'root:root' against
# found sshds
$ sshprank -s 'SSH;1;50'
# grab banners and output to file with format supported for '-l' option
$ sshprank -b hosts.txt > sshds2.txt- quick'n'dirty code
- sshprank is already packaged and available for BlackArch Linux
- My master-branches are always stable; dev-branches are created for current work.
- All of my public stuff you find are officially announced and published via nullsecurity.net.
Check docs/LICENSE.
We hereby emphasize, that the hacking related stuff found on nullsecurity.net are only for education purposes. We are not responsible for any damages. You are responsible for your own actions.