QuietCool Client

A Python client for controlling QuietCool Wireless RF Control Kit fans via Bluetooth Low Energy (BLE).

Overview

This client allows you to interact with QuietCool whole house fans that use the Wireless RF Control Kit. It provides functionality to:

• Pair with fans
• Get fan information and status
• Control fan settings
• Monitor temperature and humidity
• Manage presets

Installation

From PyPI

You can install the package directly from PyPI using pip:

pip install quietcool

From Source

1. Clone the repository:

   git clone https://github.com/emerose/quietcool.git
   cd quietcool

2. Install the package:

   pip install .

Development Setup

1. Clone the repository as above
2. Install development dependencies:

   pip install -r requirements.txt

3. Install package in editable mode:

   pip install -e .

Prerequisites

• Python 3.10 or higher
• A QuietCool fan with Wireless RF Control Kit
• Bluetooth Low Energy (BLE) support on your device
• bleak - A GATT client software, used for Bluetooth Low Energy communication

Getting Started

1. API ID Setup

The client requires an API ID to authenticate with the fan. The ID is an alphanumeric (hex?) string of the form a1b2c1d2a2b1c2d1, and is used to identify / authenticate the client. You can generate your own and provide it in several ways (checked in this order):

1. Command line argument: --id YOUR_API_ID
2. Environment variable: QUIETCOOL=YOUR_API_ID
3. Config files (first found is used):
   • ./.quietcool
   • ~/.quietcool
   • /etc/quietcool

2. Pairing

Before using the client, you need to pair it with your fan:

1. Put your fan in pairing mode (using another device or the controller's "Pair" button)
2. Run:

quietcool pair

3. Basic Usage

Get fan information:

quietcool info

Example output:

{
  "faninfo": {
    "name": "sunroom fan",
    "model": "7",
    "serial_num": "RSE2008539"
  },
  "params": {
    "mode": "Idle",
    "fan_type": "THREE",
    "temp_high": 120,
    "temp_medium": 100,
    "temp_low": 80,
    "humidity_high": 90,
    "humidity_low": 255,
    "humidity_range": "LOW",
    "hour": 1,
    "minute": 0,
    "time_range": "MEDIUM"
  },
  "version": {
    "version": "IT-BLT-ATTICFAN_V2.6",
    "protect_temp": 182,
    "create_date": "2023.07.25",
    "create_mode": "online",
    "hw_version": "A"
  },
  "presets": [
    {
      "name": "Summer",
      "temp_high": 120,
      "temp_med": 100,
      "temp_low": 80,
      "humidity_off": 90,
      "humidity_on": 255,
      "humidity_speed": "LOW"
    },
    {
      "name": "Winter",
      "temp_high": 255,
      "temp_med": 255,
      "temp_low": 255,
      "humidity_off": 255,
      "humidity_on": 255,
      "humidity_speed": "LOW"
    }
  ],
  "workstate": {
    "mode": "Idle",
    "range": "CLOSE",
    "sensor_state": "OK",
    "temperature": 71.3,
    "humidity": 36
  }
}

Command Line Options

usage:

quietcool [-h] [--id ID] [--log-level {DEBUG,INFO,WARNING,ERROR,CRITICAL}] [command]

Commands:

• info: Dumps detailed information about the connected fan
• pair: Pairs the client with a fan (fan must be in pairing mode)

Options:

• --id ID: API ID string
• --log-level {DEBUG,INFO,WARNING,ERROR,CRITICAL}: Set logging level (default: WARNING)
• -h, --help: Show help message

License

MIT License

Contributing

Contributions are welcome! Please feel free to submit a Pull Request.