Fix broken links

content/docs/authorization/v1.x GA/configuration/powermax/_index.md

@@ -55,17 +55,17 @@ Create the karavi-authorization-config secret using this command:
 
     **Helm**
 
-    Refer to the [Install the Driver](../../../deployment/helm/drivers/installation/powermax/#install-the-driver) section where you edit `samples/secret/secret.yaml` with the credentials of the PowerMax. Leave `username` and `password` with the default values as they will be ignored.
+    Refer to the [Install the Driver](../../../../deployment/helm/drivers/installation/powermax/#install-the-driver) section where you edit `samples/secret/secret.yaml` with the credentials of the PowerMax. Leave `username` and `password` with the default values as they will be ignored.
 
     **Operator**
 
-    Refer to the [Install the Driver](../../../deployment/csmoperator/drivers/powermax/#install-driver) section to prepare `powermax-creds.yaml`. Leave `username` and `password` with the default values as they will be ignored.
+    Refer to the [Install the Driver](../../../../deployment/csmoperator/drivers/powermax/#install-driver) section to prepare `powermax-creds.yaml`. Leave `username` and `password` with the default values as they will be ignored.
 
 5. Enable CSM Authorization in the driver installation applicable to your installation method.
 
     **Helm**
 
-    Refer to the [Install the Driver](../../../deployment/helm/drivers/installation/powermax/#install-the-driver) section to edit the parameters in `my-powermax-settings.yaml` file to configure the driver to communicate with the CSM Authorization sidecar.
+    Refer to the [Install the Driver](../../../../deployment/helm/drivers/installation/powermax/#install-the-driver) section to edit the parameters in `my-powermax-settings.yaml` file to configure the driver to communicate with the CSM Authorization sidecar.
 
     - Update `global.storageArrays.endpoint` to match the localhost endpoint in `samples/secret/karavi-authorization-config.json`.
 
@@ -110,7 +110,7 @@ Create the karavi-authorization-config secret using this command:
 
     **Operator**
 
-    Refer to the [Install Driver](../../../deployment/csmoperator/drivers/powermax/#install-driver) section to edit the parameters in the Custom Resource to enable CSM Authorization.
+    Refer to the [Install Driver](../../../../deployment/csmoperator/drivers/powermax/#install-driver) section to edit the parameters in the Custom Resource to enable CSM Authorization.
 
     Under `modules`, enable the module named `authorization`:
 

content/docs/authorization/v1.x GA/configuration/powerscale/_index.md

@@ -56,7 +56,7 @@ kubectl -n isilon create secret generic karavi-authorization-config --from-file=
 
     **Helm**
 
-    Refer to the [Install the Driver](../../../deployment/helm/drivers/installation/isilon/#install-the-driver) section to edit the parameters to prepare the `samples/secret/secret.yaml` file to configure the driver to communicate with the CSM Authorization sidecar.
+    Refer to the [Install the Driver](../../../../deployment/helm/drivers/installation/isilon/#install-the-driver) section to edit the parameters to prepare the `samples/secret/secret.yaml` file to configure the driver to communicate with the CSM Authorization sidecar.
 
     - Update `endpoint` to match the localhost endpoint in `samples/secret/karavi-authorization-config.json`.
 
@@ -82,7 +82,7 @@ kubectl -n isilon create secret generic karavi-authorization-config --from-file=
 
     **Operator**
 
-    Refer to the [Prerequisite](../../../deployment/csmoperator/drivers/powerscale/#prerequisite) section to prepare the `secret.yaml` file to configure the driver to communicate with the CSM Authorization sidecar.
+    Refer to the [Prerequisite](../../../../deployment/csmoperator/drivers/powerscale/#prerequisite) section to prepare the `secret.yaml` file to configure the driver to communicate with the CSM Authorization sidecar.
 
     - Update `endpoint` to match the localhost endpoint in `samples/secret/karavi-authorization-config.json`.
 
@@ -110,7 +110,7 @@ kubectl -n isilon create secret generic karavi-authorization-config --from-file=
 
     **Helm**
 
-    Refer to the [Install the Driver](../../../deployment/helm/drivers/installation/isilon/#install-the-driver) section to edit the parameters in `my-isilon-settings.yaml` file to enable CSM Authorization.
+    Refer to the [Install the Driver](../../../../deployment/helm/drivers/installation/isilon/#install-the-driver) section to edit the parameters in `my-isilon-settings.yaml` file to enable CSM Authorization.
 
     - Update `authorization.enabled` to `true`.
 
@@ -144,7 +144,7 @@ kubectl -n isilon create secret generic karavi-authorization-config --from-file=
 
     **Operator**
 
-    Refer to the [Install Driver](../../../deployment/csmoperator/drivers/powerscale/#install-driver) section to edit the parameters in the Custom Resource to enable CSM Authorization.
+    Refer to the [Install Driver](../../../../deployment/csmoperator/drivers/powerscale/#install-driver) section to edit the parameters in the Custom Resource to enable CSM Authorization.
 
     Under `modules`, enable the module named `authorization`:
 

content/docs/deployment/helm/modules/installation/authorization/_index.md

@@ -144,7 +144,7 @@ mv ./karavictl ~/.local/bin/karavictl
 # and then append (or prepend) ~/.local/bin to $PATH
 ```
 
-Karavictl commands and intended use can be found [here](../../../../../authorization/cli/). 
+Karavictl commands and intended use can be found [here](../../../../../authorization/v1.x-ga/cli/). 
 
 ## Configuring the CSM Authorization Proxy Server
 
@@ -190,7 +190,7 @@ Please continue following the steps outlined in the [proxy server](../../../../.
 
 The second part of CSM for Authorization deployment is to configure one or more of the [supported](../../../../../authorization#supported-csi-drivers) CSI drivers. This is controlled by the Kubernetes tenant admin.
 
-Please continue following the configuration steps for a specific CSI Driver [here](../../../../../authorization/configuration/).
+Please continue following the configuration steps for a specific CSI Driver [here](../../../../../authorization/v1.x-ga/configuration/).
 
 ## Updating CSM for Authorization Proxy Server Configuration
 

content/docs/deployment/rpm/modules/installation/authorization/authorization.md

@@ -123,19 +123,19 @@ A Storage Administrator can execute the shell script, install_karavi_auth.sh as
 
 5. After installation, application data will be stored on the system under `/var/lib/rancher/k3s/storage/`.
 
-If errors occur during installation, review the [Troubleshooting](../../../../../../authorization/troubleshooting) section.
+If errors occur during installation, review the [Troubleshooting](../../../../../../authorization/v1.x-ga/troubleshooting) section.
 
 ## Configuring the CSM for Authorization Proxy Server
 
 The first part of CSM for Authorization deployment is to configure the proxy server. This is controlled by the Storage Administrator.
 
-Please follow the steps outlined in the [proxy server](../../../../../../authorization/configuration/proxy-server) configuration.
+Please follow the steps outlined in the [proxy server](../../../../../../authorization/v1.x-ga/configuration/proxy-server) configuration.
 
 ## Configuring a Dell CSI Driver with CSM for Authorization
 
 The second part of CSM for Authorization deployment is to configure one or more of the [supported](../../../../../../prerequisites/#supported-csm-modules) CSI drivers. This is controlled by the Kubernetes tenant administrator.
 
-Please follow the steps outlined in [PowerFlex](../../../../../../authorization/configuration/powerflex), [PowerMax](../../../../../../authorization/configuration/powermax), or [PowerScale](../../../../../../authorization/configuration/powerscale) to configure the CSI Driver to work with the Authorization sidecar.
+Please follow the steps outlined in [PowerFlex](../../../../../../authorization/v1.x-ga/configuration/powerflex), [PowerMax](../../../../../../authorization/v1.x-ga/configuration/powermax), or [PowerScale](../../../../../../authorization/v1.x-ga/configuration/powerscale) to configure the CSI Driver to work with the Authorization sidecar.
 
 ## Updating CSM for Authorization Proxy Server Configuration
 

content/docs/support/release/_index.md

@@ -10,7 +10,7 @@ Release notes for Container Storage Modules:
 
 [CSI Drivers](../../csidriver/release)
 
-[CSM for Authorization](../../authorization/release)
+[CSM for Authorization](../../authorization/v1.x-ga/release)
 
 [CSM for Observability](../../observability/release)
 

content/docs/support/troubleshooting/_index.md

@@ -10,7 +10,7 @@ Troubleshooting links for Container Storage Modules:
 
 [CSI Drivers](../../csidriver/troubleshooting)
 
-[CSM for Authorization](../../authorization/troubleshooting)
+[CSM for Authorization](../../authorization/v1.x-ga/troubleshooting)
 
 [CSM for Observability](../../observability/troubleshooting)