Sync up with Linus

MAINTAINERS

@@ -4377,11 +4377,10 @@ F:	fs/gfs2/
 F:	include/uapi/linux/gfs2_ondisk.h
 
 GIGASET ISDN DRIVERS
-M:	Hansjoerg Lipp <[email protected]>
-M:	Tilman Schmidt <[email protected]>
+M:	Paul Bolle <[email protected]>
 L:	[email protected]
 W:	http://gigaset307x.sourceforge.net/
-S:	Maintained
+S:	Odd Fixes
 F:	Documentation/isdn/README.gigaset
 F:	drivers/isdn/gigaset/
 F:	include/uapi/linux/gigaset_dev.h
@@ -5054,7 +5053,7 @@ M:	Hal Rosenstock <[email protected]>
 L:	[email protected]
 W:	http://www.openfabrics.org/
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-T:	git git://github.com/dledford/linux.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma.git
 S:	Supported
 F:	Documentation/infiniband/
 F:	drivers/infiniband/
@@ -6959,6 +6958,17 @@ T:	git git://git.rocketboards.org/linux-socfpga-next.git
 S:	Maintained
 F:	arch/nios2/
 
+NOKIA N900 POWER SUPPLY DRIVERS
+M:	Pali Rohár <[email protected]>
+S:	Maintained
+F:	include/linux/power/bq2415x_charger.h
+F:	include/linux/power/bq27x00_battery.h
+F:	include/linux/power/isp1704_charger.h
+F:	drivers/power/bq2415x_charger.c
+F:	drivers/power/bq27x00_battery.c
+F:	drivers/power/isp1704_charger.c
+F:	drivers/power/rx51_battery.c
+
 NTB DRIVER
 M:	Jon Mason <[email protected]>
 M:	Dave Jiang <[email protected]>
@@ -8816,10 +8826,11 @@ W:	http://www.emulex.com
 S:	Supported
 F:	drivers/scsi/be2iscsi/
 
-SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-M:	Sathya Perla <[email protected]>
-M:	Subbu Seetharaman <[email protected]>
-M:	Ajit Khaparde <[email protected]>
+Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER
+M:	Sathya Perla <[email protected]>
+M:	Ajit Khaparde <[email protected]>
+M:	Padmanabh Ratnakar <[email protected]>
+M:	Sriharsha Basavapatna <[email protected]>
 L:	[email protected]
 W:	http://www.emulex.com
 S:	Supported

arch/arm/net/bpf_jit_32.c

@@ -54,6 +54,7 @@
 #define SEEN_DATA		(1 << (BPF_MEMWORDS + 3))
 
 #define FLAG_NEED_X_RESET	(1 << 0)
+#define FLAG_IMM_OVERFLOW	(1 << 1)
 
 struct jit_ctx {
 	const struct bpf_prog *skf;
@@ -293,6 +294,15 @@ static u16 imm_offset(u32 k, struct jit_ctx *ctx)
 	/* PC in ARM mode == address of the instruction + 8 */
 	imm = offset - (8 + ctx->idx * 4);
 
+	if (imm & ~0xfff) {
+		/*
+		 * literal pool is too far, signal it into flags. we
+		 * can only detect it on the second pass unfortunately.
+		 */
+		ctx->flags |= FLAG_IMM_OVERFLOW;
+		return 0;
+	}
+
 	return imm;
 }
 
@@ -449,10 +459,21 @@ static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx)
 		return;
 	}
 #endif
-	if (rm != ARM_R0)
-		emit(ARM_MOV_R(ARM_R0, rm), ctx);
+
+	/*
+	 * For BPF_ALU | BPF_DIV | BPF_K instructions, rm is ARM_R4
+	 * (r_A) and rn is ARM_R0 (r_scratch) so load rn first into
+	 * ARM_R1 to avoid accidentally overwriting ARM_R0 with rm
+	 * before using it as a source for ARM_R1.
+	 *
+	 * For BPF_ALU | BPF_DIV | BPF_X rm is ARM_R4 (r_A) and rn is
+	 * ARM_R5 (r_X) so there is no particular register overlap
+	 * issues.
+	 */
 	if (rn != ARM_R1)
 		emit(ARM_MOV_R(ARM_R1, rn), ctx);
+	if (rm != ARM_R0)
+		emit(ARM_MOV_R(ARM_R0, rm), ctx);
 
 	ctx->seen |= SEEN_CALL;
 	emit_mov_i(ARM_R3, (u32)jit_udiv, ctx);
@@ -855,6 +876,14 @@ static int build_body(struct jit_ctx *ctx)
 		default:
 			return -1;
 		}
+
+		if (ctx->flags & FLAG_IMM_OVERFLOW)
+			/*
+			 * this instruction generated an overflow when
+			 * trying to access the literal pool, so
+			 * delegate this filter to the kernel interpreter.
+			 */
+			return -1;
 	}
 
 	/* compute offsets only during the first pass */
@@ -917,7 +946,14 @@ void bpf_jit_compile(struct bpf_prog *fp)
 	ctx.idx = 0;
 
 	build_prologue(&ctx);
-	build_body(&ctx);
+	if (build_body(&ctx) < 0) {
+#if __LINUX_ARM_ARCH__ < 7
+		if (ctx.imm_count)
+			kfree(ctx.imms);
+#endif
+		bpf_jit_binary_free(header);
+		goto out;
+	}
 	build_epilogue(&ctx);
 
 	flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx));

arch/mips/include/asm/smp.h

@@ -45,7 +45,7 @@ extern int __cpu_logical_map[NR_CPUS];
 #define SMP_DUMP		0x8
 #define SMP_ASK_C0COUNT		0x10
 
-extern volatile cpumask_t cpu_callin_map;
+extern cpumask_t cpu_callin_map;
 
 /* Mask of CPUs which are currently definitely operating coherently */
 extern cpumask_t cpu_coherent_mask;

arch/mips/kernel/elf.c

@@ -76,14 +76,6 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
 
 	/* Lets see if this is an O32 ELF */
 	if (ehdr32->e_ident[EI_CLASS] == ELFCLASS32) {
-		/* FR = 1 for N32 */
-		if (ehdr32->e_flags & EF_MIPS_ABI2)
-			state->overall_fp_mode = FP_FR1;
-		else
-			/* Set a good default FPU mode for O32 */
-			state->overall_fp_mode = cpu_has_mips_r6 ?
-				FP_FRE : FP_FR0;
-
 		if (ehdr32->e_flags & EF_MIPS_FP64) {
 			/*
 			 * Set MIPS_ABI_FP_OLD_64 for EF_MIPS_FP64. We will override it
@@ -104,9 +96,6 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
 				  (char *)&abiflags,
 				  sizeof(abiflags));
 	} else {
-		/* FR=1 is really the only option for 64-bit */
-		state->overall_fp_mode = FP_FR1;
-
 		if (phdr64->p_type != PT_MIPS_ABIFLAGS)
 			return 0;
 		if (phdr64->p_filesz < sizeof(abiflags))
@@ -137,6 +126,7 @@ int arch_check_elf(void *_ehdr, bool has_interpreter,
 	struct elf32_hdr *ehdr = _ehdr;
 	struct mode_req prog_req, interp_req;
 	int fp_abi, interp_fp_abi, abi0, abi1, max_abi;
+	bool is_mips64;
 
 	if (!config_enabled(CONFIG_MIPS_O32_FP64_SUPPORT))
 		return 0;
@@ -152,10 +142,22 @@ int arch_check_elf(void *_ehdr, bool has_interpreter,
 		abi0 = abi1 = fp_abi;
 	}
 
-	/* ABI limits. O32 = FP_64A, N32/N64 = FP_SOFT */
-	max_abi = ((ehdr->e_ident[EI_CLASS] == ELFCLASS32) &&
-		   (!(ehdr->e_flags & EF_MIPS_ABI2))) ?
-		MIPS_ABI_FP_64A : MIPS_ABI_FP_SOFT;
+	is_mips64 = (ehdr->e_ident[EI_CLASS] == ELFCLASS64) ||
+		    (ehdr->e_flags & EF_MIPS_ABI2);
+
+	if (is_mips64) {
+		/* MIPS64 code always uses FR=1, thus the default is easy */
+		state->overall_fp_mode = FP_FR1;
+
+		/* Disallow access to the various FPXX & FP64 ABIs */
+		max_abi = MIPS_ABI_FP_SOFT;
+	} else {
+		/* Default to a mode capable of running code expecting FR=0 */
+		state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0;
+
+		/* Allow all ABIs we know about */
+		max_abi = MIPS_ABI_FP_64A;
+	}
 
 	if ((abi0 > max_abi && abi0 != MIPS_ABI_FP_UNKNOWN) ||
 	    (abi1 > max_abi && abi1 != MIPS_ABI_FP_UNKNOWN))

arch/mips/kernel/smp.c

@@ -43,7 +43,7 @@
 #include <asm/time.h>
 #include <asm/setup.h>
 
-volatile cpumask_t cpu_callin_map;	/* Bitmask of started secondaries */
+cpumask_t cpu_callin_map;		/* Bitmask of started secondaries */
 
 int __cpu_number_map[NR_CPUS];		/* Map physical to logical */
 EXPORT_SYMBOL(__cpu_number_map);
@@ -218,8 +218,10 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	/*
 	 * Trust is futile.  We should really have timeouts ...
 	 */
-	while (!cpumask_test_cpu(cpu, &cpu_callin_map))
+	while (!cpumask_test_cpu(cpu, &cpu_callin_map)) {
 		udelay(100);
+		schedule();
+	}
 
 	synchronise_count_master(cpu);
 	return 0;

arch/x86/net/bpf_jit_comp.c

@@ -559,6 +559,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 				if (is_ereg(dst_reg))
 					EMIT1(0x41);
 				EMIT3(0xC1, add_1reg(0xC8, dst_reg), 8);
+
+				/* emit 'movzwl eax, ax' */
+				if (is_ereg(dst_reg))
+					EMIT3(0x45, 0x0F, 0xB7);
+				else
+					EMIT2(0x0F, 0xB7);
+				EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
 				break;
 			case 32:
 				/* emit 'bswap eax' to swap lower 4 bytes */
@@ -577,6 +584,27 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 			break;
 
 		case BPF_ALU | BPF_END | BPF_FROM_LE:
+			switch (imm32) {
+			case 16:
+				/* emit 'movzwl eax, ax' to zero extend 16-bit
+				 * into 64 bit
+				 */
+				if (is_ereg(dst_reg))
+					EMIT3(0x45, 0x0F, 0xB7);
+				else
+					EMIT2(0x0F, 0xB7);
+				EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
+				break;
+			case 32:
+				/* emit 'mov eax, eax' to clear upper 32-bits */
+				if (is_ereg(dst_reg))
+					EMIT1(0x45);
+				EMIT2(0x89, add_2reg(0xC0, dst_reg, dst_reg));
+				break;
+			case 64:
+				/* nop */
+				break;
+			}
 			break;
 
 			/* ST: *(u8*)(dst_reg + off) = imm */

drivers/bluetooth/bt3c_cs.c

@@ -227,7 +227,6 @@ static void bt3c_receive(struct bt3c_info *info)
 	iobase = info->p_dev->resource[0]->start;
 
 	avail = bt3c_read(iobase, 0x7006);
-	//printk("bt3c_cs: receiving %d bytes\n", avail);
 
 	bt3c_address(iobase, 0x7480);
 	while (size < avail) {
@@ -250,7 +249,6 @@ static void bt3c_receive(struct bt3c_info *info)
 
 			bt_cb(info->rx_skb)->pkt_type = inb(iobase + DATA_L);
 			inb(iobase + DATA_H);
-			//printk("bt3c: PACKET_TYPE=%02x\n", bt_cb(info->rx_skb)->pkt_type);
 
 			switch (bt_cb(info->rx_skb)->pkt_type) {
 
@@ -364,7 +362,6 @@ static irqreturn_t bt3c_interrupt(int irq, void *dev_inst)
 			if (stat & 0x0001)
 				bt3c_receive(info);
 			if (stat & 0x0002) {
-				//BT_ERR("Ack (stat=0x%04x)", stat);
 				clear_bit(XMIT_SENDING, &(info->tx_state));
 				bt3c_write_wakeup(info);
 			}