This is a project template with related tools to convert WCH official CH32V EVT package to a GCC and Makefile project.
This template will convert the EVT package to a Makefile project and setup Link.ld according to your MCU, it support All CH32V EVT packages from WCH, include:
- CH32V003EVT.ZIP V2.0 2024-10-28
- CH32V003J4M6
- CH32V003A4M6
- CH32V003F4U6
- CH32V003F4P6
- CH32X035EVT.ZIP V1.8 2024-11-07
- CH32X035R8T6
- CH32X035C8T6
- CH32X035G8U6
- CH32X035G8R6
- CH32X035F8U6
- CH32X035F7P6
- CH32X033F8P6
- CH32V103EVT.ZIP V2.6 2024-06-27
- CH32V103C6T6
- CH32V103C8U6
- CH32V103C8T6
- CH32V103R8T6
- CH32V20xEVT.ZIP V2.2 2024-11-08
- CH32V203F6P6
- CH32V203G6U6
- CH32V203K6T6
- CH32V203C6T6
- CH32V203F8P6
- CH32V203F8U6
- CH32V203G8R6
- CH32V203K8T6
- CH32V203C8T6
- CH32V203C8U6
- CH32V203RBT6
- CH32V208GBU6
- CH32V208CBU6
- CH32V208RBT6
- CH32V208WBU6
- CH32V307EVT.ZIP V2.7 2024-11-08
- CH32V303CBT6
- CH32V303RBT6
- CH32V303RCT6
- CH32V303VCT6
- CH32V305FBP6
- CH32V305RBT6
- CH32V307RCT6
- CH32V307WCU6
- CH32V307VCT6
Assume you already have 'riscv-none-embed-gcc' toolchain installed. to generate a gcc/makefile project for specific part, type:
./generate_project_from_evt.sh <part>
If you want to change to another part in same family after project generated, use ./setpart.sh <part>.
If you do not know which part you should specify, please run ./generate_project_from_evt.sh directly for help.
After project generated, there is a 'User' dir contains the codes you should write or modify. By default, it use the 'GPIO_Toggle' example from EVT package.
Then type make to build the project.
The <part>.elf / <part>.bin / <part>.hex will be generated at 'build' dir and can be programmed to target device later.
Please refer to this tutorial to setup the ch32v dev environment.
And you must use this latest WCH OpenOCD.