VanillaCube

Lightweight C++ development environment for microcontrollers with a built-in template library.

VS Code + Linux + STM32 Cube + C++ = ❤️

Installation

GNU Arm Embedded Toolchain

• sudo apt-get install gcc-arm-none-eabi binutils-arm-none-eabi

Cube MX code generator:

• Download and install STM32 Cube MX form: https://www.st.com/en/development-tools/stm32cubemx.html
• Place a link pointing to the executable at: ~/.bin/STM32CubeMX

ST-Link Programmer:

• sudo apt-get install libusb-1.0
• Download ST-LINK firmware updater tool from: from: https://www.st.com/en/development-tools/stsw-link007.html
• Follow the instructions, but as a recap:
  • Update firmware by: sudo java -jar STLinkUpgrade.jar
  • Update kernel driver rules by: sudo dpkg -i st-stlink-udev-rules-xxxx-linux-noarch.rpm
  • Apply changes by rebooting or by: sudo udevadm control --reload-rules && sudo udevadm trigger
• Download and install STM32 Cube Prog from: https://www.st.com/en/development-tools/stm32cubeprog.html
• Place a link pointing to the CLI executable at: ~/.bin/STM32_Programmer_CLI

VanillaCube:

• Create a new git repo for your project
• Add VanillaCube as a submodule by: git submodule add https://github.com/becseya/VanillaCube
• Run VanillaCube/new-project.sh