The itCoin Payment Channel Networks Simulator

The itCoin Payment Channel Network (PCN) Simulator is based on a combination of CloTH, a state-of-the-art simulator of the Lightning Network, and ROSS, a framework for parallel discrete event simulations. The target topology for the simulator is a Semi-Hierarchical PCN, a special topology based on a three-tier structure that corresponds to the traditional financial system. The repo also includes a topology generator for Semi-Hierarchical PCNs.

Installing requirements

• Python 3.11 (with dev/distutils)
• Poetry: please, follow the official installation instructions.
• openmpi

Cloning and building the simulator

1. Clone the itcoin-pcn-simulator repository:

   cd ~
   git clone https://github.com/bancaditalia/itcoin-pcn-simulator.git

2. Build the simulator:

   cd ~/itcoin-pcn-simulator
   mkdir build
   cd build
   cmake ..
   make

Generating a topology

To generate network topologies, follow these steps:

1. Set up the poetry environment:

   cd ~/itcoin-pcn-simulator/utilities
   poetry env use python3.11
   poetry shell
   PYTHON_KEYRING_BACKEND=keyring.backends.fail.Keyring
   poetry install

2. Generate a topology. In this example, we create a topology representing three nations (Italy, Finland, Cyprus), each with proportions based on their real-world geographic sizes. Different topologies will be generated for each specified --capacity-fractions, using channel capacities defined in the --model-params-file. These topologies will be partitioned into the specified -k number of partitions, and the output will be stored in the --output-dir:

   cd ~/itcoin-pcn-simulator/utilities
   poetry shell
   mkdir -p ../experiments/workspace/topologies/seed_42
   
   python plasma_network_generator/commands/generate_all.py \
       -k 1 2 4 \
       --seed 42 \
       --size "3 30 30k 3k" \
       --nations "IT,FI,CY" \
       --capacity-fractions 0.5 1 \
       --model-params-file "plasma_network_generator/defaultModelParams.json" \
       --output-dir ../experiments/workspace/topologies/seed_42

Running a simulation

1. Run the simulator. The ROSS Kernel requires the following parameters:

   • -np: number of processes (must match the number of partitions used to partition the topology)
   • --synch: synchronization method (options: 1=sequential, 2=conservative, 3=optimistic, 5=real-time optimistic)
   • --end: simulation end time (default 100000.00)

   Additionally, the model accepts these input parameters:

   • --input-dir: directory containing the files defining the simulation parameters. The simulation parameters are read from the following files: plasma_network_channels.csv, plasma_network_edges.csv, plasma_network_nodes.csv, plasma_paths.csv, which can be generated as described above
   • --output-dir: output directory where simulation results are stored (must exist)
   • --tps: constant load mode (transactions per second)
   • --tps-config: variable load mode (configured by a file)
   • --waterfall: enable/disable automatic deposits (1/0)
   • --reverse-waterfall: enable/disable automatic withdrawals (1/0)
   • --submarine-swaps: enable/disable on-chain vs off-chain atomic swaps (1/0)

   Sample command:

   cd ~/itcoin-pcn-simulator
   mkdir -p experiments/workspace/results
   
   OUTDIR="experiments/workspace/results/$(date +"%Y%m%d%H%M%S")"
   mkdir "${OUTDIR}"
   
   NP=4 && \
   INDIR="experiments/workspace/topologies/seed_42/capacity-0.5/k_0${NP}" && \
   mpirun -np $NP build/itcoin-pcn-simulator \
       --input-dir="${INDIR}" \
       --output-dir="${OUTDIR}" \
       --synch=3 --extramem=400000 \
       --max-opt-lookahead=100 --batch=1 \
       --waterfall=1 --reverse-waterfall=1 \
       --use-known-paths=1 \
       --submarine-swaps=1 \
       --end=86400000 \
       --tps=2 \
       --block-size=4 \
       --block-congestion-rate=0 \
       --submarine-swap-threshold=0.9

Analyze results

1. You can calculate statistical about simulation results using the statistics analyzer utility. For example, after executing the following command, you will find the aggregated results in cloth_output.json

   cd ~/itcoin-pcn-simulator/utilities
   poetry shell
   
   python statistics_analyzer/commands/analyzer.py \
       --input-dir ../"${OUTDIR}" \
       --output-dir ../"${OUTDIR}"

More advanced examples

For more advanced examples and simulations, see the following files:

• DLT24 notebook