chore(deps): update pnpm to v9

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
pnpm (source)	8.15.9 -> 9.10.0

---

Release Notes

pnpm/pnpm (pnpm)

v9.10.0: pnpm 9.10

Compare Source

Minor Changes

• Support for a new CLI flag, --exclude-peers, added to the list and why commands. When --exclude-peers is used, peer dependencies are not printed in the results, but dependencies of peer dependencies are still scanned #​8506.

• Added a new setting to package.json at pnpm.auditConfig.ignoreGhsas for ignoring vulnerabilities by their GHSA code #​6838.

  For instance:

  {
    "pnpm": {
      "auditConfig": {
        "ignoreGhsas": [
          "GHSA-42xw-2xvc-qx8m",
          "GHSA-4w2v-q235-vp99",
          "GHSA-cph5-m8f7-6c5x",
          "GHSA-vh95-rmgr-6w4m"
        ]
      }
    }
  }

Patch Changes

• Throw an exception if pnpm switches to the same version of itself.
• Reduce memory usage during peer dependencies resolution.

Platinum Sponsors

Gold Sponsors

Our Silver Sponsors

v9.9.0

Compare Source

v9.8.0

Compare Source

v9.7.1

Compare Source

v9.7.0: pnpm 9.7

Compare Source

Minor Changes

• Added pnpm version management. If the manage-package-manager-versions setting is set to true, pnpm will switch to the version specified in the packageManager field of package.json #​8363. This is the same field used by Corepack. Example:

  {
    "packageManager": "[email protected]"
  }

• Added the ability to apply patch to all versions #​8337.

  If the key of pnpm.patchedDependencies is a package name without a version (e.g. pkg), pnpm will attempt to apply the patch to all versions of the package. Failures will be skipped. If there's only one version of pkg installed, pnpm patch pkg and subsequent pnpm patch-commit $edit_dir will create an entry named pkg in pnpm.patchedDependencies. And pnpm will attempt to apply this patch to other versions of pkg in the future.

• Change the default edit dir location when running pnpm patch from a temporary directory to node_modules/.pnpm_patches/pkg[@​version] to allow the code editor to open the edit dir in the same file tree as the main project #​8379.

• Substitute environment variables in config keys #​6679.

Patch Changes

• pnpm install should run node-gyp rebuild if the project has a binding.gyp file even if the project doesn't have an install script #​8293.
• Print warnings to stderr #​8342.
• Peer dependencies of optional peer dependencies should be automatically installed #​8323.

Platinum Sponsors

Gold Sponsors

Our Silver Sponsors

v9.6.0: pnpm 9.6

Compare Source

Minor Changes

• Support specifying node version (via pnpm.executionEnv.nodeVersion in package.json) for running lifecycle scripts per each package in a workspace #​6720.
• Overrides now support the catalogs: protocol #​8303.

Patch Changes

• The pnpm deploy command now supports the catalog: protocol #​8298.
• The pnpm outdated command now supports the catalog: protocol #​8304.
• Correct the error message when trying to run pnpm patch without node_modules/.modules.yaml #​8257.
• Silent reporting fixed with the pnpm exec command #​7608.
• Add registries information to the calculation of dlx cache hash #​8299.

Platinum Sponsors

Gold Sponsors

Our Silver Sponsors

v9.5.0

Compare Source

v9.4.0

Compare Source

v9.3.0

Compare Source

Minor Changes

• Semi-breaking. Dependency key names in the lockfile are shortened if they are longer than 1000 characters. We don't expect this change to affect many users. Affected users most probably can't run install successfully at the moment. This change is required to fix some edge cases in which installation fails with an out-of-memory error or "Invalid string length (RangeError: Invalid string length)" error. The max allowed length of the dependency key can be controlled with the peers-suffix-max-length setting #​8177.

Patch Changes

• Set reporter-hide-prefix to true by default for pnpm exec. In order to show prefix, the user now has to explicitly set reporter-hide-prefix=false #​8174.

Platinum Sponsors

Gold Sponsors

Our Silver Sponsors

v9.2.0

Compare Source

Minor Changes

• If package-manager-strict-version is set to true, pnpm will fail if its version doesn't exactly match the version in the "packageManager" field of package.json.

Patch Changes

• Update @yarnpkg/pnp to the latest version, fixing issue with node: imports #​8161.
• Deduplicate bin names to prevent race condition and corrupted bin scripts #​7833.
• pnpm doesn't fail if its version doesn't match the one specified in the "packageManager" field of package.json #​8087.
• exec now also streams prefixed output when --recursive or --parallel is specified just as run does #​8065.

Platinum Sponsors

Gold Sponsors

Our Silver Sponsors

v9.1.4

Compare Source

v9.1.3

Compare Source

v9.1.2

Compare Source

Patch Changes

• Reduced memory usage during peer dependencies resolution #​8084.
• Details in the pnpm licenses output are not misplaced anymore #​8071.

Platinum Sponsors

Gold Sponsors

Our Silver Sponsors

v9.1.1

Compare Source

v9.1.0

Compare Source

v9.0.6

Compare Source

v9.0.5

Compare Source

v9.0.4

Compare Source

v9.0.3

Compare Source

v9.0.2

Compare Source

v9.0.1

Compare Source

v9.0.0

Compare Source

Major Changes

• Node.js v16 support discontinued

  If you still require Node.js 16, don't worry. We ship pnpm bundled with Node.js. This means that regardless of which Node.js version you've installed, pnpm will operate using the necessary Node.js runtime. For this to work you need to install pnpm either using the standalone script or install the @pnpm/exe package.

• Configuration updates:

  • dedupe-injected-deps: enabled by default.
  • link-workspace-packages: disabled by default. This means that by default, dependencies will be linked from workspace packages only when they are specified using the workspace protocol.
  • hoist-workspace-packages: enabled by default.
  • enable-pre-post-scripts: enabled by default.
  • Use the same directory for state files on macOS as on Linux (~/.local/state/pnpm).
  • pnpm will now check the package.json file for a packageManager field. If this field is present and specifies a different package manager or a different version of pnpm than the one you're currently using, pnpm will not proceed. This ensures that you're always using the correct package manager and version that the project requires.

• Lockfile changes:

  • Lockfile v9 is adopted. This new format has changes for better readability, and better resistence to Git conflicts.
  • Support for lockfile v5 is dropped. Use pnpm v8 to convert lockfile v5 to lockfile v6 #​7470.

• Dependency resolution changes:

  • Correct resolution of peer dependencies that have their own peer dependencies.
    Related issue: #​7444.
    Related PR: #​7606.
  • Optional peer dependencies may be resolved from any packages in the dependency graph #​7830.

• pnpm licenses list prints license information of all versions of the same package in case different versions use different licenses. The format of the pnpm licenses list --json output has been changed #​7528.

• A new command added for printing completion code to the console: pnpm completion [shell]. The old command that modified the user's shell dotfiles has been removed #​3083.

• When installing git-hosted dependencies, only pick the files that would be packed with the package #​7638.

Minor Changes

• It is now possible to install only a subdirectory from a Git repository.

  For example, pnpm add github:user/repo#path:packages/foo will add a dependency from the packages/foo subdirectory.

  This new parameter may be combined with other supported parameters separated by &. For instance, the next command will install the same package from the dev branch: pnpm add github:user/repo#dev&path:packages/bar.

  Related issue: #​4765.
  Related PR: #​7487.

• node-gyp updated to version 10.

• PowerShell completion support added #​7597.

• Support node-options option inside .npmrc file when running scripts #​7596.

• Added support for registry-scoped SSL configurations (cert, key, and ca). Three new settings supported: <registryURL>:certfile, <registryURL>:keyfile, and <registryURL>:ca. For instance:

  //registry.mycomp.com/:certfile=server-cert.pem
  //registry.mycomp.com/:keyfile=server-key.pem
  //registry.mycomp.com/:cafile=client-cert.pem
  

  Related issue: #​7427.
  Related PR: #​7626.

• Add a field named ignoredOptionalDependencies. This is an array of strings. If an optional dependency has its name included in this array, it will be skipped #​7714.

• The checksum of the .pnpmfile.cjs is saved into the lockfile. If the pnpmfile gets modified, the lockfile is reanalyzed to apply the changes #​7662.

• Added cache for pnpm dlx #​5277.

Patch Changes

• Package tarballs are not downloaded during --lockfile-only installation #​1328.
• Peer dependency rules should only affect reporting, not data in the lockfile #​7758.
• Link overrides should be able to use absolute path #​7749.
• pnpm dlx should not read settings from the current working directory #​7916.

Platinum Sponsors

Configuration 📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied. ♻ Rebasing: Whenever PR is behind base branch, or you tick the rebase/retry checkbox. 🔕 Ignore: Close this PR and you won't be reminded about this update again. If you want to rebase/retry this PR, check this box This PR was generated by Mend Renovate. View the repository job log.

[netlify]

✅ Deploy Preview for unpic-next ready!

Name	Link
🔨 Latest commit	ca1b94a
🔍 Latest deploy log	https://app.netlify.com/sites/unpic-next/deploys/66ebf5d68ae9e60008d50ab0
😎 Deploy Preview	https://deploy-preview-637--unpic-next.netlify.app
📱 Preview on mobile	Toggle QR Code... Use your smartphone camera to open QR code link.

---

To edit notification comments on pull requests, go to your Netlify site configuration.

[netlify]

✅ Deploy Preview for unpic-docs ready!

Name	Link
🔨 Latest commit	ca1b94a
🔍 Latest deploy log	https://app.netlify.com/sites/unpic-docs/deploys/66ebf5d6e203bb0008b7bbe3
😎 Deploy Preview	https://deploy-preview-637.preview.unpic.pics
📱 Preview on mobile	Toggle QR Code... Use your smartphone camera to open QR code link.
Lighthouse	1 paths audited Performance: 99 (no change from production) Accessibility: 100 (no change from production) Best Practices: 92 (no change from production) SEO: 100 (no change from production) PWA: - View the detailed breakdown and full score reports

---

To edit notification comments on pull requests, go to your Netlify site configuration.

[netlify]

✅ Deploy Preview for unpic-angular ready!

Name	Link
🔨 Latest commit	ca1b94a
🔍 Latest deploy log	https://app.netlify.com/sites/unpic-angular/deploys/66ebf5d62147280008ca952d
😎 Deploy Preview	https://deploy-preview-637--unpic-angular.netlify.app
📱 Preview on mobile	Toggle QR Code... Use your smartphone camera to open QR code link.

---

To edit notification comments on pull requests, go to your Netlify site configuration.

[renovate]

Edited/Blocked Notification

Renovate will not automatically rebase this PR, because it does not recognize the last commit author and assumes somebody else may have edited the PR.

You can manually request rebase by checking the rebase/retry box above.

⚠️ Warning: custom changes will be lost.