apollographql · EverlastingBugstopper · Feb 11, 2022 · Feb 11, 2022
@@ -4,7 +4,7 @@ All notable changes to Rover will be documented in this file.
 
 This project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
-<!-- # [x.x.x] (unreleased) - 2021-mm-dd
+<!-- # [x.x.x] (unreleased) - 2022-mm-dd
 
 > Important: X breaking changes below, indicated by **❗ BREAKING ❗**
 
@@ -18,6 +18,66 @@ This project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.htm
 
 ## 📚 Documentation -->
 
+# [0.4.2] - 2022-02-11
+
+## 🚀 Features
+
+- **Adds launch URL feedback to `rover subgraph publish` - @Y-Guo, #989**
+
+  If a `rover subgraph publish` invocation kicks off a [launch](https://www.apollographql.com/docs/studio/launches/), it will now output the URL associated with the launch so you can go right to it in Studio.
+
+- **Improve messaging for `rover subgraph check` - @david-castaneda, #980**
+
+  In the case where the API schema does not change after a `subgraph check` but the core schema was modified, you are now notified as such rather than being displayed a confusing "there were no changes detected" message.
+
+## 🐛 Fixes
+
+- **Omit Float scalars from introspection result - @lrlna, #988 fixes #985**
+
+  Since `Float` is a built-in GraphQL scalar type, it is no longer included in Rover's introspection results.
+
+- **Fix configuration error messages when there are no profiles - @EverlastingBugstopper, #995 fixes #783**
+
+  Rover had a hard time detecting when there were no configured profiles, so it never actually emitted error `E020`. Now it does, and we also get some performance improvements by only parsing environment variables on startup rather than on every time they are needed.
+
+- **No longer panic when printing large output - @EverlastingBugstopper, #955 fixes #842**
+
+  Migrate away from the `println` and `eprintln` macros that can cause panics from time to time and instead use calm_io to gracefully handle output.
+
+- **Lowers the maximum required `glibc` version from 2.18 to 2.17 - @EverlastingBugstopper, #990 fixes #992**
+
+  We build Rover in Docker with the `centos:7` base image, which has `glibc` `v2.17` installed. This means we can lower our installer requirements to 2.17, allowing folks on older machines like centos to install Rover. Thanks to @theJC for the report and help with testing!
+
+- **Removes unused `--profile` argument from `rover subgraph introspect` - @EverlastingBugstopper, #950 fixes #948**
+
+## 🛠 Maintenance
+
+- **Use `apollo-encoder` in `rover-client` - @lrlna, #939**
+
+  `sdl-encoder` has been replaced with the official `apollo-encoder` from the [`apollo-rs`](https://github.com/apollographql/apollo-rs) ecosystem.
+
+- **Add PR template - @EverlastingBugstopper, #488**
+
+  Now folks who are kind enough to contribute pull requests to Rover's repository will have a helpful template to fill out.
+
+- **Fix mechanism for building old versions of Rover - @EverlastingBugstopper, #973 fixes #967**
+
+  If a build is executed via `cargo xtask dist --version vx.x.x`, it will now _actually_ download the schema it needs from the GitHub release artifacts page in order to build for the exact types that were built at that tagged version.
+
+- **Allow Rover to be installed alongside Node.js v17 - @EverlastingBugstopper, #999 fixes #993**
+
+- **Run plugin tests and lints in xtask - @EverlastingBugstopper, #977 fixes #909**
+
+- **Adds new unused input type to check mutations - @EverlastingBugstopper, #969 fixes #967**
+
+  Update the inputs to our check mutations to always send `null` for the `excludedOperationNames` field.
+
+## 📚 Documentation
+
+- **Add docs for `rover supergraph fetch` - @StephenBarlow, #971 fixes #952**
+
+- **Miscellaneous documentation polish - @StephenBarlow, #965, #963**
+
 # [0.4.1] - 2021-11-18
 
 ## 🚀 Features

@@ -11,7 +11,7 @@ license-file = "./LICENSE"
 name = "rover"
 readme = "README.md"
 repository = "https://github.com/apollographql/rover/"
-version = "0.4.1"
+version = "0.4.2"
 default-run = "rover"
 
 publish = false

@@ -37,7 +37,7 @@ rover graph publish --schema ./path-to-valid-schema test@cats
 ## Command-line options
 
 ```console
-Rover 0.4.1
+Rover 0.4.2
 
 Rover - Your Graph Companion
 Read the getting started guide by running:
@@ -66,37 +66,18 @@ USAGE:
     rover [FLAGS] [OPTIONS] <SUBCOMMAND>
 
 FLAGS:
-        --insecure-accept-invalid-certs        
-            Accept invalid certificates when performing HTTPS requests.
-
-            You should think very carefully before using this flag.
-
-            If invalid certificates are trusted, any certificate for any site will be trusted for use. This includes
-            expired certificates. This introduces significant vulnerabilities, and should only be used as a last resort.
-        --insecure-accept-invalid-hostnames    
-            Accept invalid hostnames when performing HTTPS requests.
-
-            You should think very carefully before using this flag.
-
-            If hostname verification is not used, any valid certificate for any site will be trusted for use from any
-            other. This introduces a significant vulnerability to man-in-the-middle attacks.
-    -h, --help                                 
-            Prints help information
-
-    -V, --version                              
-            Prints version information
-
+        --insecure-accept-invalid-certs        Accept invalid certificates when performing HTTPS requests
+        --insecure-accept-invalid-hostnames    Accept invalid hostnames when performing HTTPS requests
+    -h, --help                                 Prints help information
+    -V, --version                              Prints version information
 
 OPTIONS:
-        --client-timeout <client-timeout>    
-            Configure the timeout length (in seconds) when performing HTTP(S) requests [default: 30]
-
-    -l, --log <log-level>                    
-            Specify Rover's log level [possible values: error, warn, info, debug,
-            trace]
-        --output <output-type>               
-            Specify Rover's output type [default: plain]  [possible values: json, plain]
-
+        --client-timeout <client-timeout>    Configure the timeout length (in seconds) when performing HTTP(S) requests
+                                             [default: 30]
+    -l, --log <log-level>                    Specify Rover's log level [possible values: error, warn,
+                                             info, debug, trace]
+        --output <output-type>               Specify Rover's output type [default: plain]  [possible values:
+                                             json, plain]
 
 SUBCOMMANDS:
     config        Configuration profile commands
@@ -142,7 +123,7 @@ To install a specific version of Rover (note the `v` prefixing the version numbe
 > Note: If you're installing Rover in a CI environment, it's best to target a specific version rather than using the latest URL, since future major breaking changes could affect CI workflows otherwise.
 
 ```bash
-curl -sSL https://rover.apollo.dev/nix/v0.4.1 | sh
+curl -sSL https://rover.apollo.dev/nix/v0.4.2 | sh
 ```
 
 You will need `curl` installed on your system to run the above installation commands. You can get the latest version from [the curl downloads page](https://curl.se/download.html).
@@ -160,7 +141,7 @@ To install a specific version of Rover (note the `v` prefixing the version numbe
 > Note: If you're installing Rover in a CI environment, it's best to target a specific version rather than using the latest URL, since future major breaking changes could affect CI workflows otherwise.
 
 ```bash
-iwr 'https://rover.apollo.dev/win/v0.4.1' | iex
+iwr 'https://rover.apollo.dev/win/v0.4.2' | iex
 ```
 
 #### npm installer