Added compatibility support for 151 and 153 #2

koansoftware · 2020-03-05T09:35:38Z

Added Device Tree compatibility support for "st,stm32mp151" and "st,stm32mp153"
because CubeMX generates compatble string for those MPU versions.
for example: compatible = "st,stm32mp151c-stm32mp151caax-mx", "st,stm32mp151";

Avoid error
sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt'
kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register things with the same name in the same directory.

Added Device Tree compatibility support for "st,stm32mp151" and "st,stm32mp153" because CubeMX generates compatble string for those MPU versions. for example: compatible = "st,stm32mp151c-stm32mp151caax-mx", "st,stm32mp151";

atorgue · 2020-03-09T14:57:09Z

Hi,

Same kind of patches are under review (internally). They will be available in next github release.

Regards
Alex

…#2] [ Upstream commit d12040b ] When a local endpoint is ceases to be in use, such as when the kafs module is unloaded, the kernel will emit an assertion failure if there are any outstanding client connections: rxrpc: Assertion failed ------------[ cut here ]------------ kernel BUG at net/rxrpc/local_object.c:433! and even beyond that, will evince other oopses if there are service connections still present. Fix this by: (1) Removing the triggering of connection reaping when an rxrpc socket is released. These don't actually clean up the connections anyway - and further, the local endpoint may still be in use through another socket. (2) Mark the local endpoint as dead when we start the process of tearing it down. (3) When destroying a local endpoint, strip all of its client connections from the idle list and discard the ref on each that the list was holding. (4) When destroying a local endpoint, call the service connection reaper directly (rather than through a workqueue) to immediately kill off all outstanding service connections. (5) Make the service connection reaper reap connections for which the local endpoint is marked dead. Only after destroying the connections can we close the socket lest we get an oops in a workqueue that's looking at a connection or a peer. Fixes: 3d18cbb ("rxrpc: Fix conn expiry timers") Signed-off-by: David Howells <[email protected]> Tested-by: Marc Dionne <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit d15e592 upstream. Patch series "mm: online/offline_pages called w.o. mem_hotplug_lock", v3. Reading through the code and studying how mem_hotplug_lock is to be used, I noticed that there are two places where we can end up calling device_online()/device_offline() - online_pages()/offline_pages() without the mem_hotplug_lock. And there are other places where we call device_online()/device_offline() without the device_hotplug_lock. While e.g. echo "online" > /sys/devices/system/memory/memory9/state is fine, e.g. echo 1 > /sys/devices/system/memory/memory9/online Will not take the mem_hotplug_lock. However the device_lock() and device_hotplug_lock. E.g. via memory_probe_store(), we can end up calling add_memory()->online_pages() without the device_hotplug_lock. So we can have concurrent callers in online_pages(). We e.g. touch in online_pages() basically unprotected zone->present_pages then. Looks like there is a longer history to that (see Patch #2 for details), and fixing it to work the way it was intended is not really possible. We would e.g. have to take the mem_hotplug_lock in device/base/core.c, which sounds wrong. Summary: We had a lock inversion on mem_hotplug_lock and device_lock(). More details can be found in patch 3 and patch 6. I propose the general rules (documentation added in patch 6): 1. add_memory/add_memory_resource() must only be called with device_hotplug_lock. 2. remove_memory() must only be called with device_hotplug_lock. This is already documented and holds for all callers. 3. device_online()/device_offline() must only be called with device_hotplug_lock. This is already documented and true for now in core code. Other callers (related to memory hotplug) have to be fixed up. 4. mem_hotplug_lock is taken inside of add_memory/remove_memory/ online_pages/offline_pages. To me, this looks way cleaner than what we have right now (and easier to verify). And looking at the documentation of remove_memory, using lock_device_hotplug also for add_memory() feels natural. This patch (of 6): remove_memory() is exported right now but requires the device_hotplug_lock, which is not exported. So let's provide a variant that takes the lock and only export that one. The lock is already held in arch/powerpc/platforms/pseries/hotplug-memory.c drivers/acpi/acpi_memhotplug.c arch/powerpc/platforms/powernv/memtrace.c Apart from that, there are not other users in the tree. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: David Hildenbrand <[email protected]> Reviewed-by: Pavel Tatashin <[email protected]> Reviewed-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Rashmica Gupta <[email protected]> Reviewed-by: Oscar Salvador <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Len Brown <[email protected]> Cc: Rashmica Gupta <[email protected]> Cc: Michael Neuling <[email protected]> Cc: Balbir Singh <[email protected]> Cc: Nathan Fontenot <[email protected]> Cc: John Allen <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Dan Williams <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: YASUAKI ISHIMATSU <[email protected]> Cc: Mathieu Malaterre <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Haiyang Zhang <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Kate Stewart <[email protected]> Cc: "K. Y. Srinivasan" <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Philippe Ombredanne <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: David Hildenbrand <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 334b0f4 upstream. There is a race condition which results in a deadlock when rmdir and mkdir execute concurrently: $ ls /sys/fs/resctrl/c1/mon_groups/m1/ cpus cpus_list mon_data tasks Thread 1: rmdir /sys/fs/resctrl/c1 Thread 2: mkdir /sys/fs/resctrl/c1/mon_groups/m1 3 locks held by mkdir/48649: #0: (sb_writers#17){.+.+}, at: [<ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50 #1: (&type->i_mutex_dir_key#8/1){+.+.}, at: [<ffffffffb4c8c13b>] filename_create+0x7b/0x170 #2: (rdtgroup_mutex){+.+.}, at: [<ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70 4 locks held by rmdir/48652: #0: (sb_writers#17){.+.+}, at: [<ffffffffb4ca2aa0>] mnt_want_write+0x20/0x50 #1: (&type->i_mutex_dir_key#8/1){+.+.}, at: [<ffffffffb4c8c3cf>] do_rmdir+0x13f/0x1e0 #2: (&type->i_mutex_dir_key#8){++++}, at: [<ffffffffb4c86d5d>] vfs_rmdir+0x4d/0x120 #3: (rdtgroup_mutex){+.+.}, at: [<ffffffffb4a4389d>] rdtgroup_kn_lock_live+0x3d/0x70 Thread 1 is deleting control group "c1". Holding rdtgroup_mutex, kernfs_remove() removes all kernfs nodes under directory "c1" recursively, then waits for sub kernfs node "mon_groups" to drop active reference. Thread 2 is trying to create a subdirectory "m1" in the "mon_groups" directory. The wrapper kernfs_iop_mkdir() takes an active reference to the "mon_groups" directory but the code drops the active reference to the parent directory "c1" instead. As a result, Thread 1 is blocked on waiting for active reference to drop and never release rdtgroup_mutex, while Thread 2 is also blocked on trying to get rdtgroup_mutex. Thread 1 (rdtgroup_rmdir) Thread 2 (rdtgroup_mkdir) (rmdir /sys/fs/resctrl/c1) (mkdir /sys/fs/resctrl/c1/mon_groups/m1) ------------------------- ------------------------- kernfs_iop_mkdir /* * kn: "m1", parent_kn: "mon_groups", * prgrp_kn: parent_kn->parent: "c1", * * "mon_groups", parent_kn->active++: 1 */ kernfs_get_active(parent_kn) kernfs_iop_rmdir /* "c1", kn->active++ */ kernfs_get_active(kn) rdtgroup_kn_lock_live atomic_inc(&rdtgrp->waitcount) /* "c1", kn->active-- */ kernfs_break_active_protection(kn) mutex_lock rdtgroup_rmdir_ctrl free_all_child_rdtgrp sentry->flags = RDT_DELETED rdtgroup_ctrl_remove rdtgrp->flags = RDT_DELETED kernfs_get(kn) kernfs_remove(rdtgrp->kn) __kernfs_remove /* "mon_groups", sub_kn */ atomic_add(KN_DEACTIVATED_BIAS, &sub_kn->active) kernfs_drain(sub_kn) /* * sub_kn->active == KN_DEACTIVATED_BIAS + 1, * waiting on sub_kn->active to drop, but it * never drops in Thread 2 which is blocked * on getting rdtgroup_mutex. */ Thread 1 hangs here ----> wait_event(sub_kn->active == KN_DEACTIVATED_BIAS) ... rdtgroup_mkdir rdtgroup_mkdir_mon(parent_kn, prgrp_kn) mkdir_rdt_prepare(parent_kn, prgrp_kn) rdtgroup_kn_lock_live(prgrp_kn) atomic_inc(&rdtgrp->waitcount) /* * "c1", prgrp_kn->active-- * * The active reference on "c1" is * dropped, but not matching the * actual active reference taken * on "mon_groups", thus causing * Thread 1 to wait forever while * holding rdtgroup_mutex. */ kernfs_break_active_protection( prgrp_kn) /* * Trying to get rdtgroup_mutex * which is held by Thread 1. */ Thread 2 hangs here ----> mutex_lock ... The problem is that the creation of a subdirectory in the "mon_groups" directory incorrectly releases the active protection of its parent directory instead of itself before it starts waiting for rdtgroup_mutex. This is triggered by the rdtgroup_mkdir() flow calling rdtgroup_kn_lock_live()/rdtgroup_kn_unlock() with kernfs node of the parent control group ("c1") as argument. It should be called with kernfs node "mon_groups" instead. What is currently missing is that the kn->priv of "mon_groups" is NULL instead of pointing to the rdtgrp. Fix it by pointing kn->priv to rdtgrp when "mon_groups" is created. Then it could be passed to rdtgroup_kn_lock_live()/rdtgroup_kn_unlock() instead. And then it operates on the same rdtgroup structure but handles the active reference of kernfs node "mon_groups" to prevent deadlock. The same changes are also made to the "mon_data" directories. This results in some unused function parameters that will be cleaned up in follow-up patch as the focus here is on the fix only in support of backporting efforts. Backporting notes: Since upstream commit fa7d949 ("x86/resctrl: Rename and move rdt files to a separate directory"), the file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to arch/x86/kernel/cpu/resctrl/rdtgroup.c. Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c for older stable trees. Fixes: c7d9aac ("x86/intel_rdt/cqm: Add mkdir support for RDT monitoring") Suggested-by: Reinette Chatre <[email protected]> Signed-off-by: Xiaochen Shen <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Reviewed-by: Tony Luck <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

commit f1037ec upstream. The daxctl unit test for the dax_kmem driver currently triggers the (false positive) lockdep splat below. It results from the fact that remove_memory_block_devices() is invoked under the mem_hotplug_lock() causing lockdep entanglements with cpu_hotplug_lock() and sysfs (kernfs active state tracking). It is a false positive because the sysfs attribute path triggering the memory remove is not the same attribute path associated with memory-block device. sysfs_break_active_protection() is not applicable since there is no real deadlock conflict, instead move memory-block device removal outside the lock. The mem_hotplug_lock() is not needed to synchronize the memory-block device removal vs the page online state, that is already handled by lock_device_hotplug(). Specifically, lock_device_hotplug() is sufficient to allow try_remove_memory() to check the offline state of the memblocks and be assured that any in progress online attempts are flushed / blocked by kernfs_drain() / attribute removal. The add_memory() path safely creates memblock devices under the mem_hotplug_lock(). There is no kernfs active state synchronization in the memblock device_register() path, so nothing to fix there. This change is only possible thanks to the recent change that refactored memory block device removal out of arch_remove_memory() (commit 4c4b7f9 "mm/memory_hotplug: remove memory block devices before arch_remove_memory()"), and David's due diligence tracking down the guarantees afforded by kernfs_drain(). Not flagged for -stable since this only impacts ongoing development and lockdep validation, not a runtime issue. ====================================================== WARNING: possible circular locking dependency detected 5.5.0-rc3+ torvalds#230 Tainted: G OE ------------------------------------------------------ lt-daxctl/6459 is trying to acquire lock: ffff99c7f0003510 (kn->count#241){++++}, at: kernfs_remove_by_name_ns+0x41/0x80 but task is already holding lock: ffffffffa76a5450 (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x20/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (mem_hotplug_lock.rw_sem){++++}: __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 get_online_mems+0x3e/0xb0 kmem_cache_create_usercopy+0x2e/0x260 kmem_cache_create+0x12/0x20 ptlock_cache_init+0x20/0x28 start_kernel+0x243/0x547 secondary_startup_64+0xb6/0xc0 -> #1 (cpu_hotplug_lock.rw_sem){++++}: __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 cpus_read_lock+0x3e/0xb0 online_pages+0x37/0x300 memory_subsys_online+0x17d/0x1c0 device_online+0x60/0x80 state_store+0x65/0xd0 kernfs_fop_write+0xcf/0x1c0 vfs_write+0xdb/0x1d0 ksys_write+0x65/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#241){++++}: check_prev_add+0x98/0xa40 validate_chain+0x576/0x860 __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 __kernfs_remove+0x25f/0x2e0 kernfs_remove_by_name_ns+0x41/0x80 remove_files.isra.0+0x30/0x70 sysfs_remove_group+0x3d/0x80 sysfs_remove_groups+0x29/0x40 device_remove_attrs+0x39/0x70 device_del+0x16a/0x3f0 device_unregister+0x16/0x60 remove_memory_block_devices+0x82/0xb0 try_remove_memory+0xb5/0x130 remove_memory+0x26/0x40 dev_dax_kmem_remove+0x44/0x6a [kmem] device_release_driver_internal+0xe4/0x1c0 unbind_store+0xef/0x120 kernfs_fop_write+0xcf/0x1c0 vfs_write+0xdb/0x1d0 ksys_write+0x65/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: kn->count#241 --> cpu_hotplug_lock.rw_sem --> mem_hotplug_lock.rw_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(mem_hotplug_lock.rw_sem); lock(cpu_hotplug_lock.rw_sem); lock(mem_hotplug_lock.rw_sem); lock(kn->count#241); *** DEADLOCK *** No fixes tag as this has been a long standing issue that predated the addition of kernfs lockdep annotations. Link: http://lkml.kernel.org/r/157991441887.2763922.4770790047389427325.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <[email protected]> Acked-by: Michal Hocko <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Cc: Vishal Verma <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Dave Hansen <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 1cfbb48 upstream. Confusingly, there are three SPSR layouts that a kernel may need to deal with: (1) An AArch64 SPSR_ELx view of an AArch64 pstate (2) An AArch64 SPSR_ELx view of an AArch32 pstate (3) An AArch32 SPSR_* view of an AArch32 pstate When the KVM AArch32 support code deals with SPSR_{EL2,HYP}, it's either dealing with #2 or #3 consistently. On arm64 the PSR_AA32_* definitions match the AArch64 SPSR_ELx view, and on arm the PSR_AA32_* definitions match the AArch32 SPSR_* view. However, when we inject an exception into an AArch32 guest, we have to synthesize the AArch32 SPSR_* that the guest will see. Thus, an AArch64 host needs to synthesize layout #3 from layout #2. This patch adds a new host_spsr_to_spsr32() helper for this, and makes use of it in the KVM AArch32 support code. For arm64 we need to shuffle the DIT bit around, and remove the SS bit, while for arm we can use the value as-is. I've open-coded the bit manipulation for now to avoid having to rework the existing PSR_* definitions into PSR64_AA32_* and PSR32_AA32_* definitions. I hope to perform a more thorough refactoring in future so that we can handle pstate view manipulation more consistently across the kernel tree. Signed-off-by: Mark Rutland <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Reviewed-by: Alexandru Elisei <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 96bf313ecb33567af4cb53928b0c951254a02759 ] There exists a deadlock with range_cyclic that has existed forever. If we loop around with a bio already built we could deadlock with a writer who has the page locked that we're attempting to write but is waiting on a page in our bio to be written out. The task traces are as follows PID: 1329874 TASK: ffff889ebcdf3800 CPU: 33 COMMAND: "kworker/u113:5" #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3 #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42 #3 [ffffc900297bb708] __lock_page at ffffffff811f145b #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502 #5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684 #6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff #7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0 #8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2 #9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd PID: 2167901 TASK: ffff889dc6a59c00 CPU: 14 COMMAND: "aio-dio-invalid" #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3 #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42 #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6 #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7 #5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359 #6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933 #7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8 #8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d #9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032 I used drgn to find the respective pages we were stuck on page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901 page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874 As you can see the kworker is waiting for bit 0 (PG_locked) on index 7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index 8148. aio-dio-invalid has 7680, and the kworker epd looks like the following crash> struct extent_page_data ffffc900297bbbb0 struct extent_page_data { bio = 0xffff889f747ed830, tree = 0xffff889eed6ba448, extent_locked = 0, sync_io = 0 } Probably worth mentioning as well that it waits for writeback of the page to complete while holding a lock on it (at prepare_pages()). Using drgn I walked the bio pages looking for page 0xffffea00fbfc7500 which is the one we're waiting for writeback on bio = Object(prog, 'struct bio', address=0xffff889f747ed830) for i in range(0, bio.bi_vcnt.value_()): bv = bio.bi_io_vec[i] if bv.bv_page.value_() == 0xffffea00fbfc7500: print("FOUND IT") which validated what I suspected. The fix for this is simple, flush the epd before we loop back around to the beginning of the file during writeout. Fixes: b293f02 ("Btrfs: Add writepages support") CC: [email protected] # 4.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit a72f4ac upstream. Add a check that the size specified in the flow spec header doesn't cause an overflow when calculating the filter size, and thus prevent access to invalid memory. The following crash from syzkaller revealed it. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 17834 Comm: syz-executor.3 Not tainted 5.5.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:memchr_inv+0xd3/0x330 Code: 89 f9 89 f5 83 e1 07 0f 85 f9 00 00 00 49 89 d5 49 c1 ed 03 45 85 ed 74 6f 48 89 d9 48 b8 00 00 00 00 00 fc ff df 48 c1 e9 03 <80> 3c 01 00 0f 85 0d 02 00 00 44 0f b6 e5 48 b8 01 01 01 01 01 01 RSP: 0018:ffffc9000a13fa50 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 7fff88810de9d820 RCX: 0ffff11021bd3b04 RDX: 000000000000fff8 RSI: 0000000000000000 RDI: 7fff88810de9d820 RBP: 0000000000000000 R08: ffff888110d69018 R09: 0000000000000009 R10: 0000000000000001 R11: ffffed10236267cc R12: 0000000000000004 R13: 0000000000001fff R14: ffff88810de9d820 R15: 0000000000000040 FS: 00007f9ee0e51700(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000115ea0006 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: spec_filter_size.part.16+0x34/0x50 ib_uverbs_kern_spec_to_ib_spec_filter+0x691/0x770 ib_uverbs_ex_create_flow+0x9ea/0x1b40 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x465b49 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9ee0e50c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000465b49 RDX: 00000000000003a0 RSI: 00000000200007c0 RDI: 0000000000000004 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9ee0e516bc R13: 00000000004ca2da R14: 000000000070deb8 R15: 00000000ffffffff Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) Fixes: 94e03f1 ("IB/uverbs: Add support for flow tag") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Avihai Horon <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 1dd0178 upstream. We don't need to set pkey as valid in case that user set only one of pkey index or port number, otherwise it will be resulted in NULL pointer dereference while accessing to uninitialized pkey list. The following crash from Syzkaller revealed it. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 14753 Comm: syz-executor.2 Not tainted 5.5.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:get_pkey_idx_qp_list+0x161/0x2d0 Code: 01 00 00 49 8b 5e 20 4c 39 e3 0f 84 b9 00 00 00 e8 e4 42 6e fe 48 8d 7b 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 01 0f 8e d0 00 00 00 48 8d 7d 04 48 b8 RSP: 0018:ffffc9000bc6f950 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff82c8bdec RDX: 0000000000000002 RSI: ffffc900030a8000 RDI: 0000000000000010 RBP: ffff888112c8ce80 R08: 0000000000000004 R09: fffff5200178df1f R10: 0000000000000001 R11: fffff5200178df1f R12: ffff888115dc4430 R13: ffff888115da8498 R14: ffff888115dc4410 R15: ffff888115da8000 FS: 00007f20777de700(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2f721000 CR3: 00000001173ca002 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: port_pkey_list_insert+0xd7/0x7c0 ib_security_modify_qp+0x6fa/0xfc0 _ib_modify_qp+0x8c4/0xbf0 modify_qp+0x10da/0x16d0 ib_uverbs_modify_qp+0x9a/0x100 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: d291f1a ("IB/core: Enforce PKey security on QPs") Link: https://lore.kernel.org/r/20200212080651.GB679970@unreal Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Message-Id: <20200212080651.GB679970@unreal> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 1b710b1 ] Sergey didn't like the locking order, uart_port->lock -> tty_port->lock uart_write (uart_port->lock) __uart_start pl011_start_tx pl011_tx_chars uart_write_wakeup tty_port_tty_wakeup tty_port_default tty_port_tty_get (tty_port->lock) but those code is so old, and I have no clue how to de-couple it after checking other locks in the splat. There is an onging effort to make all printk() as deferred, so until that happens, workaround it for now as a short-term fix. LTP: starting iogen01 (export LTPROOT; rwtest -N iogen01 -i 120s -s read,write -Da -Dv -n 2 500b:$TMPDIR/doio.f1.$$ 1000b:$TMPDIR/doio.f2.$$) WARNING: possible circular locking dependency detected ------------------------------------------------------ doio/49441 is trying to acquire lock: ffff008b7cff7290 (&(&zone->lock)->rlock){..-.}, at: rmqueue+0x138/0x2050 but task is already holding lock: 60ff000822352818 (&pool->lock/1){-.-.}, at: start_flush_work+0xd8/0x3f0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&pool->lock/1){-.-.}: lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 __queue_work+0x4b4/0xa10 queue_work_on+0xac/0x11c tty_schedule_flip+0x84/0xbc tty_flip_buffer_push+0x1c/0x28 pty_write+0x98/0xd0 n_tty_write+0x450/0x60c tty_write+0x338/0x474 __vfs_write+0x88/0x214 vfs_write+0x12c/0x1a4 redirected_tty_write+0x90/0xdc do_loop_readv_writev+0x140/0x180 do_iter_write+0xe0/0x10c vfs_writev+0x134/0x1cc do_writev+0xbc/0x130 __arm64_sys_writev+0x58/0x8c el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 -> #3 (&(&port->lock)->rlock){-.-.}: lock_acquire+0x320/0x360 _raw_spin_lock_irqsave+0x7c/0x9c tty_port_tty_get+0x24/0x60 tty_port_default_wakeup+0x1c/0x3c tty_port_tty_wakeup+0x34/0x40 uart_write_wakeup+0x28/0x44 pl011_tx_chars+0x1b8/0x270 pl011_start_tx+0x24/0x70 __uart_start+0x5c/0x68 uart_write+0x164/0x1c8 do_output_char+0x33c/0x348 n_tty_write+0x4bc/0x60c tty_write+0x338/0x474 redirected_tty_write+0xc0/0xdc do_loop_readv_writev+0x140/0x180 do_iter_write+0xe0/0x10c vfs_writev+0x134/0x1cc do_writev+0xbc/0x130 __arm64_sys_writev+0x58/0x8c el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 -> #2 (&port_lock_key){-.-.}: lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 pl011_console_write+0xec/0x2cc console_unlock+0x794/0x96c vprintk_emit+0x260/0x31c vprintk_default+0x54/0x7c vprintk_func+0x218/0x254 printk+0x7c/0xa4 register_console+0x734/0x7b0 uart_add_one_port+0x734/0x834 pl011_register_port+0x6c/0xac sbsa_uart_probe+0x234/0x2ec platform_drv_probe+0xd4/0x124 really_probe+0x250/0x71c driver_probe_device+0xb4/0x200 __device_attach_driver+0xd8/0x188 bus_for_each_drv+0xbc/0x110 __device_attach+0x120/0x220 device_initial_probe+0x20/0x2c bus_probe_device+0x54/0x100 device_add+0xae8/0xc2c platform_device_add+0x278/0x3b8 platform_device_register_full+0x238/0x2ac acpi_create_platform_device+0x2dc/0x3a8 acpi_bus_attach+0x390/0x3cc acpi_bus_attach+0x108/0x3cc acpi_bus_attach+0x108/0x3cc acpi_bus_attach+0x108/0x3cc acpi_bus_scan+0x7c/0xb0 acpi_scan_init+0xe4/0x304 acpi_init+0x100/0x114 do_one_initcall+0x348/0x6a0 do_initcall_level+0x190/0x1fc do_basic_setup+0x34/0x4c kernel_init_freeable+0x19c/0x260 kernel_init+0x18/0x338 ret_from_fork+0x10/0x18 -> #1 (console_owner){-...}: lock_acquire+0x320/0x360 console_lock_spinning_enable+0x6c/0x7c console_unlock+0x4f8/0x96c vprintk_emit+0x260/0x31c vprintk_default+0x54/0x7c vprintk_func+0x218/0x254 printk+0x7c/0xa4 get_random_u64+0x1c4/0x1dc shuffle_pick_tail+0x40/0xac __free_one_page+0x424/0x710 free_one_page+0x70/0x120 __free_pages_ok+0x61c/0xa94 __free_pages_core+0x1bc/0x294 memblock_free_pages+0x38/0x48 __free_pages_memory+0xcc/0xfc __free_memory_core+0x70/0x78 free_low_memory_core_early+0x148/0x18c memblock_free_all+0x18/0x54 mem_init+0xb4/0x17c mm_init+0x14/0x38 start_kernel+0x19c/0x530 -> #0 (&(&zone->lock)->rlock){..-.}: validate_chain+0xf6c/0x2e2c __lock_acquire+0x868/0xc2c lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 rmqueue+0x138/0x2050 get_page_from_freelist+0x474/0x688 __alloc_pages_nodemask+0x3b4/0x18dc alloc_pages_current+0xd0/0xe0 alloc_slab_page+0x2b4/0x5e0 new_slab+0xc8/0x6bc ___slab_alloc+0x3b8/0x640 kmem_cache_alloc+0x4b4/0x588 __debug_object_init+0x778/0x8b4 debug_object_init_on_stack+0x40/0x50 start_flush_work+0x16c/0x3f0 __flush_work+0xb8/0x124 flush_work+0x20/0x30 xlog_cil_force_lsn+0x88/0x204 [xfs] xfs_log_force_lsn+0x128/0x1b8 [xfs] xfs_file_fsync+0x3c4/0x488 [xfs] vfs_fsync_range+0xb0/0xd0 generic_write_sync+0x80/0xa0 [xfs] xfs_file_buffered_aio_write+0x66c/0x6e4 [xfs] xfs_file_write_iter+0x1a0/0x218 [xfs] __vfs_write+0x1cc/0x214 vfs_write+0x12c/0x1a4 ksys_write+0xb0/0x120 __arm64_sys_write+0x54/0x88 el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 other info that might help us debug this: Chain exists of: &(&zone->lock)->rlock --> &(&port->lock)->rlock --> &pool->lock/1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pool->lock/1); lock(&(&port->lock)->rlock); lock(&pool->lock/1); lock(&(&zone->lock)->rlock); *** DEADLOCK *** 4 locks held by doio/49441: #0: a0ff00886fc27408 (sb_writers#8){.+.+}, at: vfs_write+0x118/0x1a4 #1: 8fff00080810dfe0 (&xfs_nondir_ilock_class){++++}, at: xfs_ilock+0x2a8/0x300 [xfs] #2: ffff9000129f2390 (rcu_read_lock){....}, at: rcu_lock_acquire+0x8/0x38 #3: 60ff000822352818 (&pool->lock/1){-.-.}, at: start_flush_work+0xd8/0x3f0 stack backtrace: CPU: 48 PID: 49441 Comm: doio Tainted: G W Hardware name: HPE Apollo 70 /C01_APACHE_MB , BIOS L50_5.13_1.11 06/18/2019 Call trace: dump_backtrace+0x0/0x248 show_stack+0x20/0x2c dump_stack+0xe8/0x150 print_circular_bug+0x368/0x380 check_noncircular+0x28c/0x294 validate_chain+0xf6c/0x2e2c __lock_acquire+0x868/0xc2c lock_acquire+0x320/0x360 _raw_spin_lock+0x64/0x80 rmqueue+0x138/0x2050 get_page_from_freelist+0x474/0x688 __alloc_pages_nodemask+0x3b4/0x18dc alloc_pages_current+0xd0/0xe0 alloc_slab_page+0x2b4/0x5e0 new_slab+0xc8/0x6bc ___slab_alloc+0x3b8/0x640 kmem_cache_alloc+0x4b4/0x588 __debug_object_init+0x778/0x8b4 debug_object_init_on_stack+0x40/0x50 start_flush_work+0x16c/0x3f0 __flush_work+0xb8/0x124 flush_work+0x20/0x30 xlog_cil_force_lsn+0x88/0x204 [xfs] xfs_log_force_lsn+0x128/0x1b8 [xfs] xfs_file_fsync+0x3c4/0x488 [xfs] vfs_fsync_range+0xb0/0xd0 generic_write_sync+0x80/0xa0 [xfs] xfs_file_buffered_aio_write+0x66c/0x6e4 [xfs] xfs_file_write_iter+0x1a0/0x218 [xfs] __vfs_write+0x1cc/0x214 vfs_write+0x12c/0x1a4 ksys_write+0xb0/0x120 __arm64_sys_write+0x54/0x88 el0_svc_handler+0x170/0x240 el0_sync_handler+0x150/0x250 el0_sync+0x164/0x180 Reviewed-by: Sergey Senozhatsky <[email protected]> Signed-off-by: Qian Cai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 576c75e ] With zpci_disable() working, lockdep detected a potential deadlock (lockdep output at the end). The deadlock is between recovering a PCI function via the /sys/bus/pci/devices/<dev>/recover attribute vs powering it off via /sys/bus/pci/slots/<slot>/power. The fix is analogous to the changes in commit 0ee223b ("scsi: core: Avoid that SCSI device removal through sysfs triggers a deadlock") that fixed a potential deadlock on removing a SCSI device via sysfs. [ 204.830107] ====================================================== [ 204.830109] WARNING: possible circular locking dependency detected [ 204.830111] 5.5.0-rc2-06072-gbc03ecc9a672 #6 Tainted: G W [ 204.830112] ------------------------------------------------------ [ 204.830113] bash/1034 is trying to acquire lock: [ 204.830115] 0000000192a1a610 (kn->count#200){++++}, at: kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830122] but task is already holding lock: [ 204.830123] 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48 [ 204.830128] which lock already depends on the new lock. [ 204.830129] the existing dependency chain (in reverse order) is: [ 204.830130] -> #1 (pci_rescan_remove_lock){+.+.}: [ 204.830134] validate_chain+0x93a/0xd08 [ 204.830136] __lock_acquire+0x4ae/0x9d0 [ 204.830137] lock_acquire+0x114/0x280 [ 204.830140] __mutex_lock+0xa2/0x960 [ 204.830142] mutex_lock_nested+0x32/0x40 [ 204.830145] recover_store+0x4c/0xa8 [ 204.830147] kernfs_fop_write+0xe6/0x218 [ 204.830151] vfs_write+0xb0/0x1b8 [ 204.830152] ksys_write+0x6c/0xf8 [ 204.830154] system_call+0xd8/0x2d8 [ 204.830155] -> #0 (kn->count#200){++++}: [ 204.830187] check_noncircular+0x1e6/0x240 [ 204.830189] check_prev_add+0xfc/0xdb0 [ 204.830190] validate_chain+0x93a/0xd08 [ 204.830192] __lock_acquire+0x4ae/0x9d0 [ 204.830193] lock_acquire+0x114/0x280 [ 204.830194] __kernfs_remove.part.0+0x2e4/0x360 [ 204.830196] kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830198] remove_files.isra.0+0x4c/0x98 [ 204.830199] sysfs_remove_group+0x66/0xc8 [ 204.830201] sysfs_remove_groups+0x46/0x68 [ 204.830204] device_remove_attrs+0x52/0x90 [ 204.830207] device_del+0x182/0x418 [ 204.830208] pci_remove_bus_device+0x8a/0x130 [ 204.830210] pci_stop_and_remove_bus_device_locked+0x3a/0x48 [ 204.830212] disable_slot+0x68/0x100 [ 204.830213] power_write_file+0x7c/0x130 [ 204.830215] kernfs_fop_write+0xe6/0x218 [ 204.830217] vfs_write+0xb0/0x1b8 [ 204.830218] ksys_write+0x6c/0xf8 [ 204.830220] system_call+0xd8/0x2d8 [ 204.830221] other info that might help us debug this: [ 204.830223] Possible unsafe locking scenario: [ 204.830224] CPU0 CPU1 [ 204.830225] ---- ---- [ 204.830226] lock(pci_rescan_remove_lock); [ 204.830227] lock(kn->count#200); [ 204.830229] lock(pci_rescan_remove_lock); [ 204.830231] lock(kn->count#200); [ 204.830233] *** DEADLOCK *** [ 204.830234] 4 locks held by bash/1034: [ 204.830235] #0: 00000001b6fbc498 (sb_writers#4){.+.+}, at: vfs_write+0x158/0x1b8 [ 204.830239] #1: 000000018c9f5090 (&of->mutex){+.+.}, at: kernfs_fop_write+0xaa/0x218 [ 204.830242] #2: 00000001f7da0810 (kn->count#235){.+.+}, at: kernfs_fop_write+0xb6/0x218 [ 204.830245] #3: 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48 [ 204.830248] stack backtrace: [ 204.830250] CPU: 2 PID: 1034 Comm: bash Tainted: G W 5.5.0-rc2-06072-gbc03ecc9a672 #6 [ 204.830252] Hardware name: IBM 8561 T01 703 (LPAR) [ 204.830253] Call Trace: [ 204.830257] [<00000000c05e10c0>] show_stack+0x88/0xf0 [ 204.830260] [<00000000c112dca4>] dump_stack+0xa4/0xe0 [ 204.830261] [<00000000c0694c06>] check_noncircular+0x1e6/0x240 [ 204.830263] [<00000000c0695bec>] check_prev_add+0xfc/0xdb0 [ 204.830264] [<00000000c06971da>] validate_chain+0x93a/0xd08 [ 204.830266] [<00000000c06994c6>] __lock_acquire+0x4ae/0x9d0 [ 204.830267] [<00000000c069867c>] lock_acquire+0x114/0x280 [ 204.830269] [<00000000c09ca15c>] __kernfs_remove.part.0+0x2e4/0x360 [ 204.830270] [<00000000c09cb5c4>] kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830272] [<00000000c09cee14>] remove_files.isra.0+0x4c/0x98 [ 204.830274] [<00000000c09cf2ae>] sysfs_remove_group+0x66/0xc8 [ 204.830276] [<00000000c09cf356>] sysfs_remove_groups+0x46/0x68 [ 204.830278] [<00000000c0e3dfe2>] device_remove_attrs+0x52/0x90 [ 204.830280] [<00000000c0e40382>] device_del+0x182/0x418 [ 204.830281] [<00000000c0dcfd7a>] pci_remove_bus_device+0x8a/0x130 [ 204.830283] [<00000000c0dcfe92>] pci_stop_and_remove_bus_device_locked+0x3a/0x48 [ 204.830285] [<00000000c0de7190>] disable_slot+0x68/0x100 [ 204.830286] [<00000000c0de6514>] power_write_file+0x7c/0x130 [ 204.830288] [<00000000c09cc846>] kernfs_fop_write+0xe6/0x218 [ 204.830290] [<00000000c08f3480>] vfs_write+0xb0/0x1b8 [ 204.830291] [<00000000c08f378c>] ksys_write+0x6c/0xf8 [ 204.830293] [<00000000c1154374>] system_call+0xd8/0x2d8 [ 204.830294] INFO: lockdep is turned off. Signed-off-by: Niklas Schnelle <[email protected]> Reviewed-by: Peter Oberparleiter <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit db735fc ] Turning on CONFIG_DMA_API_DEBUG_SG results in the following error: [ 12.078665] msm ae00000.mdss: DMA-API: mapping sg segment longer than device claims to support [len=3526656] [max=65536] [ 12.089870] WARNING: CPU: 6 PID: 334 at /mnt/host/source/src/third_party/kernel/v4.19/kernel/dma/debug.c:1301 debug_dma_map_sg+0x1dc/0x318 [ 12.102655] Modules linked in: joydev [ 12.106442] CPU: 6 PID: 334 Comm: frecon Not tainted 4.19.0 #2 [ 12.112450] Hardware name: Google Cheza (rev3+) (DT) [ 12.117566] pstate: 60400009 (nZCv daif +PAN -UAO) [ 12.122506] pc : debug_dma_map_sg+0x1dc/0x318 [ 12.126995] lr : debug_dma_map_sg+0x1dc/0x318 [ 12.131487] sp : ffffff800cc3ba80 [ 12.134913] x29: ffffff800cc3ba80 x28: 0000000000000000 [ 12.140395] x27: 0000000000000004 x26: 0000000000000004 [ 12.145868] x25: ffffff8008e55b18 x24: 0000000000000000 [ 12.151337] x23: 00000000ffffffff x22: ffffff800921c000 [ 12.156809] x21: ffffffc0fa75b080 x20: ffffffc0f7195090 [ 12.162280] x19: ffffffc0f1c53280 x18: 0000000000000000 [ 12.167749] x17: 0000000000000000 x16: 0000000000000000 [ 12.173218] x15: 0000000000000000 x14: 0720072007200720 [ 12.178689] x13: 0720072007200720 x12: 0720072007200720 [ 12.184161] x11: 0720072007200720 x10: 0720072007200720 [ 12.189641] x9 : ffffffc0f1fc6b60 x8 : 0000000000000000 [ 12.195110] x7 : ffffff8008132ce0 x6 : 0000000000000000 [ 12.200585] x5 : 0000000000000000 x4 : ffffff8008134734 [ 12.206058] x3 : ffffff800cc3b830 x2 : ffffffc0f1fc6240 [ 12.211532] x1 : 25045a74f48a7400 x0 : 25045a74f48a7400 [ 12.217006] Call trace: [ 12.219535] debug_dma_map_sg+0x1dc/0x318 [ 12.223671] get_pages+0x19c/0x20c [ 12.227177] msm_gem_fault+0x64/0xfc [ 12.230874] __do_fault+0x3c/0x140 [ 12.234383] __handle_mm_fault+0x70c/0xdb8 [ 12.238603] handle_mm_fault+0xac/0xc4 [ 12.242473] do_page_fault+0x1bc/0x3d4 [ 12.246342] do_translation_fault+0x54/0x88 [ 12.250652] do_mem_abort+0x60/0xf0 [ 12.254250] el0_da+0x20/0x24 [ 12.257317] irq event stamp: 67260 [ 12.260828] hardirqs last enabled at (67259): [<ffffff8008132d0c>] console_unlock+0x214/0x608 [ 12.269693] hardirqs last disabled at (67260): [<ffffff8008080e0c>] do_debug_exception+0x5c/0x178 [ 12.278820] softirqs last enabled at (67256): [<ffffff8008081664>] __do_softirq+0x4d4/0x520 [ 12.287510] softirqs last disabled at (67249): [<ffffff80080be574>] irq_exit+0xa8/0x100 [ 12.295742] ---[ end trace e63cfc40c313ffab ]--- The root of the problem is that the default segment size for sgt is (UINT_MAX & PAGE_MASK), and the default segment size for device dma is 64K. As such, if you compare the 2, you would deduce that the sg segment will overflow the device's capacity. In reality, the hardware can accommodate the larger sg segments, it's just not initializing its max segment properly. This patch initializes the max segment size for the mdss device, which gets rid of that pesky warning. Reported-by: Stephen Boyd <[email protected]> Tested-by: Stephen Boyd <[email protected]> Tested-by: Sai Prakash Ranjan <[email protected]> Reviewed-by: Rob Clark <[email protected]> Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Douglas Anderson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20200121111813.REPOST.1.I92c66a35fb13f368095b05287bdabdbe88ca6922@changeid Signed-off-by: Sasha Levin <[email protected]>

ADESTM · 2020-05-13T08:06:52Z

Hi,

Patch is available here:
a352df3
and is part of v4.19-stm32mp-r3.1 release.

Thanks!

[ Upstream commit 102210f ] rmnet_get_port() internally calls rcu_dereference_rtnl(), which checks RTNL. But rmnet_get_port() could be called by packet path. The packet path is not protected by RTNL. So, the suspicious RCU usage problem occurs. Test commands: modprobe rmnet ip netns add nst ip link add veth0 type veth peer name veth1 ip link set veth1 netns nst ip link add rmnet0 link veth0 type rmnet mux_id 1 ip netns exec nst ip link add rmnet1 link veth1 type rmnet mux_id 1 ip netns exec nst ip link set veth1 up ip netns exec nst ip link set rmnet1 up ip netns exec nst ip a a 192.168.100.2/24 dev rmnet1 ip link set veth0 up ip link set rmnet0 up ip a a 192.168.100.1/24 dev rmnet0 ping 192.168.100.2 Splat looks like: [ 146.630958][ T1174] WARNING: suspicious RCU usage [ 146.631735][ T1174] 5.6.0-rc1+ torvalds#447 Not tainted [ 146.632387][ T1174] ----------------------------- [ 146.633151][ T1174] drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c:386 suspicious rcu_dereference_check() ! [ 146.634742][ T1174] [ 146.634742][ T1174] other info that might help us debug this: [ 146.634742][ T1174] [ 146.645992][ T1174] [ 146.645992][ T1174] rcu_scheduler_active = 2, debug_locks = 1 [ 146.646937][ T1174] 5 locks held by ping/1174: [ 146.647609][ T1174] #0: ffff8880c31dea70 (sk_lock-AF_INET){+.+.}, at: raw_sendmsg+0xab8/0x2980 [ 146.662463][ T1174] #1: ffffffff93925660 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x243/0x2150 [ 146.671696][ T1174] #2: ffffffff93925660 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x213/0x2940 [ 146.673064][ T1174] #3: ffff8880c19ecd58 (&dev->qdisc_running_key#7){+...}, at: ip_finish_output2+0x714/0x2150 [ 146.690358][ T1174] #4: ffff8880c5796898 (&dev->qdisc_xmit_lock_key#3){+.-.}, at: sch_direct_xmit+0x1e2/0x1020 [ 146.699875][ T1174] [ 146.699875][ T1174] stack backtrace: [ 146.701091][ T1174] CPU: 0 PID: 1174 Comm: ping Not tainted 5.6.0-rc1+ torvalds#447 [ 146.705215][ T1174] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 146.706565][ T1174] Call Trace: [ 146.707102][ T1174] dump_stack+0x96/0xdb [ 146.708007][ T1174] rmnet_get_port.part.9+0x76/0x80 [rmnet] [ 146.709233][ T1174] rmnet_egress_handler+0x107/0x420 [rmnet] [ 146.710492][ T1174] ? sch_direct_xmit+0x1e2/0x1020 [ 146.716193][ T1174] rmnet_vnd_start_xmit+0x3d/0xa0 [rmnet] [ 146.717012][ T1174] dev_hard_start_xmit+0x160/0x740 [ 146.717854][ T1174] sch_direct_xmit+0x265/0x1020 [ 146.718577][ T1174] ? register_lock_class+0x14d0/0x14d0 [ 146.719429][ T1174] ? dev_watchdog+0xac0/0xac0 [ 146.723738][ T1174] ? __dev_queue_xmit+0x15fd/0x2940 [ 146.724469][ T1174] ? lock_acquire+0x164/0x3b0 [ 146.725172][ T1174] __dev_queue_xmit+0x20c7/0x2940 [ ... ] Fixes: ceed73a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 6c5d911 ] journal_head::b_transaction and journal_head::b_next_transaction could be accessed concurrently as noticed by KCSAN, LTP: starting fsync04 /dev/zero: Can't open blockdev EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) ================================================================== BUG: KCSAN: data-race in __jbd2_journal_refile_buffer [jbd2] / jbd2_write_access_granted [jbd2] write to 0xffff99f9b1bd0e30 of 8 bytes by task 25721 on cpu 70: __jbd2_journal_refile_buffer+0xdd/0x210 [jbd2] __jbd2_journal_refile_buffer at fs/jbd2/transaction.c:2569 jbd2_journal_commit_transaction+0x2d15/0x3f20 [jbd2] (inlined by) jbd2_journal_commit_transaction at fs/jbd2/commit.c:1034 kjournald2+0x13b/0x450 [jbd2] kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 read to 0xffff99f9b1bd0e30 of 8 bytes by task 25724 on cpu 68: jbd2_write_access_granted+0x1b2/0x250 [jbd2] jbd2_write_access_granted at fs/jbd2/transaction.c:1155 jbd2_journal_get_write_access+0x2c/0x60 [jbd2] __ext4_journal_get_write_access+0x50/0x90 [ext4] ext4_mb_mark_diskspace_used+0x158/0x620 [ext4] ext4_mb_new_blocks+0x54f/0xca0 [ext4] ext4_ind_map_blocks+0xc79/0x1b40 [ext4] ext4_map_blocks+0x3b4/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block+0x3b/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe 5 locks held by fsync04/25724: #0: ffff99f9911093f8 (sb_writers#13){.+.+}, at: vfs_write+0x21c/0x260 #1: ffff99f9db4c0348 (&sb->s_type->i_mutex_key#15){+.+.}, at: ext4_buffered_write_iter+0x65/0x210 [ext4] #2: ffff99f5e7dfcf58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff99f9db4c0168 (&ei->i_data_sem){++++}, at: ext4_map_blocks+0x176/0x950 [ext4] #4: ffffffff99086b40 (rcu_read_lock){....}, at: jbd2_write_access_granted+0x4e/0x250 [jbd2] irq event stamp: 1407125 hardirqs last enabled at (1407125): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (1407124): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (1405528): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (1405521): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 68 PID: 25724 Comm: fsync04 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 The plain reads are outside of jh->b_state_lock critical section which result in data races. Fix them by adding pairs of READ|WRITE_ONCE(). Reviewed-by: Jan Kara <[email protected]> Signed-off-by: Qian Cai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…dency [ Upstream commit 7809f70 ] On a very heavily loaded D05 with GICv4, I managed to trigger the following lockdep splat: [ 6022.598864] ====================================================== [ 6022.605031] WARNING: possible circular locking dependency detected [ 6022.611200] 5.6.0-rc4-00026-geee7c7b0f498 torvalds#680 Tainted: G E [ 6022.618061] ------------------------------------------------------ [ 6022.624227] qemu-system-aar/7569 is trying to acquire lock: [ 6022.629789] ffff042f97606808 (&p->pi_lock){-.-.}, at: try_to_wake_up+0x54/0x7a0 [ 6022.637102] [ 6022.637102] but task is already holding lock: [ 6022.642921] ffff002fae424cf0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x5c/0x98 [ 6022.651350] [ 6022.651350] which lock already depends on the new lock. [ 6022.651350] [ 6022.659512] [ 6022.659512] the existing dependency chain (in reverse order) is: [ 6022.666980] [ 6022.666980] -> #2 (&irq_desc_lock_class){-.-.}: [ 6022.672983] _raw_spin_lock_irqsave+0x50/0x78 [ 6022.677848] __irq_get_desc_lock+0x5c/0x98 [ 6022.682453] irq_set_vcpu_affinity+0x40/0xc0 [ 6022.687236] its_make_vpe_non_resident+0x6c/0xb8 [ 6022.692364] vgic_v4_put+0x54/0x70 [ 6022.696273] vgic_v3_put+0x20/0xd8 [ 6022.700183] kvm_vgic_put+0x30/0x48 [ 6022.704182] kvm_arch_vcpu_put+0x34/0x50 [ 6022.708614] kvm_sched_out+0x34/0x50 [ 6022.712700] __schedule+0x4bc/0x7f8 [ 6022.716697] schedule+0x50/0xd8 [ 6022.720347] kvm_arch_vcpu_ioctl_run+0x5f0/0x978 [ 6022.725473] kvm_vcpu_ioctl+0x3d4/0x8f8 [ 6022.729820] ksys_ioctl+0x90/0xd0 [ 6022.733642] __arm64_sys_ioctl+0x24/0x30 [ 6022.738074] el0_svc_common.constprop.3+0xa8/0x1e8 [ 6022.743373] do_el0_svc+0x28/0x88 [ 6022.747198] el0_svc+0x14/0x40 [ 6022.750761] el0_sync_handler+0x124/0x2b8 [ 6022.755278] el0_sync+0x140/0x180 [ 6022.759100] [ 6022.759100] -> #1 (&rq->lock){-.-.}: [ 6022.764143] _raw_spin_lock+0x38/0x50 [ 6022.768314] task_fork_fair+0x40/0x128 [ 6022.772572] sched_fork+0xe0/0x210 [ 6022.776484] copy_process+0x8c4/0x18d8 [ 6022.780742] _do_fork+0x88/0x6d8 [ 6022.784478] kernel_thread+0x64/0x88 [ 6022.788563] rest_init+0x30/0x270 [ 6022.792390] arch_call_rest_init+0x14/0x1c [ 6022.796995] start_kernel+0x498/0x4c4 [ 6022.801164] [ 6022.801164] -> #0 (&p->pi_lock){-.-.}: [ 6022.806382] __lock_acquire+0xdd8/0x15c8 [ 6022.810813] lock_acquire+0xd0/0x218 [ 6022.814896] _raw_spin_lock_irqsave+0x50/0x78 [ 6022.819761] try_to_wake_up+0x54/0x7a0 [ 6022.824018] wake_up_process+0x1c/0x28 [ 6022.828276] wakeup_softirqd+0x38/0x40 [ 6022.832533] __tasklet_schedule_common+0xc4/0xf0 [ 6022.837658] __tasklet_schedule+0x24/0x30 [ 6022.842176] check_irq_resend+0xc8/0x158 [ 6022.846609] irq_startup+0x74/0x128 [ 6022.850606] __enable_irq+0x6c/0x78 [ 6022.854602] enable_irq+0x54/0xa0 [ 6022.858431] its_make_vpe_non_resident+0xa4/0xb8 [ 6022.863557] vgic_v4_put+0x54/0x70 [ 6022.867469] kvm_arch_vcpu_blocking+0x28/0x38 [ 6022.872336] kvm_vcpu_block+0x48/0x490 [ 6022.876594] kvm_handle_wfx+0x18c/0x310 [ 6022.880938] handle_exit+0x138/0x198 [ 6022.885022] kvm_arch_vcpu_ioctl_run+0x4d4/0x978 [ 6022.890148] kvm_vcpu_ioctl+0x3d4/0x8f8 [ 6022.894494] ksys_ioctl+0x90/0xd0 [ 6022.898317] __arm64_sys_ioctl+0x24/0x30 [ 6022.902748] el0_svc_common.constprop.3+0xa8/0x1e8 [ 6022.908046] do_el0_svc+0x28/0x88 [ 6022.911871] el0_svc+0x14/0x40 [ 6022.915434] el0_sync_handler+0x124/0x2b8 [ 6022.919951] el0_sync+0x140/0x180 [ 6022.923773] [ 6022.923773] other info that might help us debug this: [ 6022.923773] [ 6022.931762] Chain exists of: [ 6022.931762] &p->pi_lock --> &rq->lock --> &irq_desc_lock_class [ 6022.931762] [ 6022.942101] Possible unsafe locking scenario: [ 6022.942101] [ 6022.948007] CPU0 CPU1 [ 6022.952523] ---- ---- [ 6022.957039] lock(&irq_desc_lock_class); [ 6022.961036] lock(&rq->lock); [ 6022.966595] lock(&irq_desc_lock_class); [ 6022.973109] lock(&p->pi_lock); [ 6022.976324] [ 6022.976324] *** DEADLOCK *** This is happening because we have a pending doorbell that requires retrigger. As SW retriggering is done in a tasklet, we trigger the circular dependency above. The easy cop-out is to provide a retrigger callback that doesn't require acquiring any extra lock. Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

commit f0cc2cd upstream. During unmount we can have a job from the delayed inode items work queue still running, that can lead to at least two bad things: 1) A crash, because the worker can try to create a transaction just after the fs roots were freed; 2) A transaction leak, because the worker can create a transaction before the fs roots are freed and just after we committed the last transaction and after we stopped the transaction kthread. A stack trace example of the crash: [79011.691214] kernel BUG at lib/radix-tree.c:982! [79011.692056] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [79011.693180] CPU: 3 PID: 1394 Comm: kworker/u8:2 Tainted: G W 5.6.0-rc2-btrfs-next-54 #2 (...) [79011.696789] Workqueue: btrfs-delayed-meta btrfs_work_helper [btrfs] [79011.697904] RIP: 0010:radix_tree_tag_set+0xe7/0x170 (...) [79011.702014] RSP: 0018:ffffb3c84a317ca0 EFLAGS: 00010293 [79011.702949] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [79011.704202] RDX: ffffb3c84a317cb0 RSI: ffffb3c84a317ca8 RDI: ffff8db3931340a0 [79011.705463] RBP: 0000000000000005 R08: 0000000000000005 R09: ffffffff974629d0 [79011.706756] R10: ffffb3c84a317bc0 R11: 0000000000000001 R12: ffff8db393134000 [79011.708010] R13: ffff8db3931340a0 R14: ffff8db393134068 R15: 0000000000000001 [79011.709270] FS: 0000000000000000(0000) GS:ffff8db3b6a00000(0000) knlGS:0000000000000000 [79011.710699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [79011.711710] CR2: 00007f22c2a0a000 CR3: 0000000232ad4005 CR4: 00000000003606e0 [79011.712958] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [79011.714205] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [79011.715448] Call Trace: [79011.715925] record_root_in_trans+0x72/0xf0 [btrfs] [79011.716819] btrfs_record_root_in_trans+0x4b/0x70 [btrfs] [79011.717925] start_transaction+0xdd/0x5c0 [btrfs] [79011.718829] btrfs_async_run_delayed_root+0x17e/0x2b0 [btrfs] [79011.719915] btrfs_work_helper+0xaa/0x720 [btrfs] [79011.720773] process_one_work+0x26d/0x6a0 [79011.721497] worker_thread+0x4f/0x3e0 [79011.722153] ? process_one_work+0x6a0/0x6a0 [79011.722901] kthread+0x103/0x140 [79011.723481] ? kthread_create_worker_on_cpu+0x70/0x70 [79011.724379] ret_from_fork+0x3a/0x50 (...) The following diagram shows a sequence of steps that lead to the crash during ummount of the filesystem: CPU 1 CPU 2 CPU 3 btrfs_punch_hole() btrfs_btree_balance_dirty() btrfs_balance_delayed_items() --> sees fs_info->delayed_root->items with value 200, which is greater than BTRFS_DELAYED_BACKGROUND (128) and smaller than BTRFS_DELAYED_WRITEBACK (512) btrfs_wq_run_delayed_node() --> queues a job for fs_info->delayed_workers to run btrfs_async_run_delayed_root() btrfs_async_run_delayed_root() --> job queued by CPU 1 --> starts picking and running delayed nodes from the prepare_list list close_ctree() btrfs_delete_unused_bgs() btrfs_commit_super() btrfs_join_transaction() --> gets transaction N btrfs_commit_transaction(N) --> set transaction state to TRANTS_STATE_COMMIT_START btrfs_first_prepared_delayed_node() --> picks delayed node X through the prepared_list list btrfs_run_delayed_items() btrfs_first_delayed_node() --> also picks delayed node X but through the node_list list __btrfs_commit_inode_delayed_items() --> runs all delayed items from this node and drops the node's item count to 0 through call to btrfs_release_delayed_inode() --> finishes running any remaining delayed nodes --> finishes transaction commit --> stops cleaner and transaction threads btrfs_free_fs_roots() --> frees all roots and removes them from the radix tree fs_info->fs_roots_radix btrfs_join_transaction() start_transaction() btrfs_record_root_in_trans() record_root_in_trans() radix_tree_tag_set() --> crashes because the root is not in the radix tree anymore If the worker is able to call btrfs_join_transaction() before the unmount task frees the fs roots, we end up leaking a transaction and all its resources, since after the call to btrfs_commit_super() and stopping the transaction kthread, we don't expect to have any transaction open anymore. When this situation happens the worker has a delayed node that has no more items to run, since the task calling btrfs_run_delayed_items(), which is doing a transaction commit, picks the same node and runs all its items first. We can not wait for the worker to complete when running delayed items through btrfs_run_delayed_items(), because we call that function in several phases of a transaction commit, and that could cause a deadlock because the worker calls btrfs_join_transaction() and the task doing the transaction commit may have already set the transaction state to TRANS_STATE_COMMIT_DOING. Also it's not possible to get into a situation where only some of the items of a delayed node are added to the fs/subvolume tree in the current transaction and the remaining ones in the next transaction, because when running the items of a delayed inode we lock its mutex, effectively waiting for the worker if the worker is running the items of the delayed node already. Since this can only cause issues when unmounting a filesystem, fix it in a simple way by waiting for any jobs on the delayed workers queue before calling btrfs_commit_supper() at close_ctree(). This works because at this point no one can call btrfs_btree_balance_dirty() or btrfs_balance_delayed_items(), and if we end up waiting for any worker to complete, btrfs_commit_super() will commit the transaction created by the worker. CC: [email protected] # 4.4+ Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 28936b6 upstream. inode->i_blocks could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118: inode_add_bytes+0x65/0xf0 __inode_add_bytes at fs/stat.c:689 (inlined by) inode_add_bytes at fs/stat.c:702 ext4_mb_new_blocks+0x418/0xca0 [ext4] ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4] ext4_map_blocks+0x1a9/0x950 [ext4] _ext4_get_block+0xfc/0x270 [ext4] ext4_get_block_unwritten+0x33/0x50 [ext4] __block_write_begin_int+0x22e/0xae0 __block_write_begin+0x39/0x50 ext4_write_begin+0x388/0xb50 [ext4] ext4_da_write_begin+0x35f/0x8f0 [ext4] generic_perform_write+0x15d/0x290 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb05 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65: ext4_do_update_inode+0x4a0/0xf60 [ext4] ext4_inode_blocks_set at fs/ext4/inode.c:4815 ext4_mark_iloc_dirty+0xaf/0x160 [ext4] ext4_mark_inode_dirty+0x129/0x3e0 [ext4] ext4_convert_unwritten_extents+0x253/0x2d0 [ext4] ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4] ext4_end_io_rsv_work+0x22c/0x350 [ext4] process_one_work+0x54f/0xb90 worker_thread+0x80/0x5f0 kthread+0x1cd/0x1f0 ret_from_fork+0x27/0x50 4 locks held by kworker/u256:0/8: #0: ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90 #1: ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90 #2: ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2] #3: ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4] irq event stamp: 3009267 hardirqs last enabled at (3009267): [<ffffffff980da9b7>] __find_get_block+0x107/0x790 hardirqs last disabled at (3009266): [<ffffffff980da8f9>] __find_get_block+0x49/0x790 softirqs last enabled at (3009230): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c softirqs last disabled at (3009223): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0 Reported by Kernel Concurrency Sanitizer on: CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-20200221+ #7 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4] The plain read is outside of inode->i_lock critical section which results in a data race. Fix it by adding READ_ONCE() there. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Qian Cai <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 351cbf6 ] Zygo reported the following lockdep splat while testing the balance patches ====================================================== WARNING: possible circular locking dependency detected 5.6.0-c6f0579d496a+ #53 Not tainted ------------------------------------------------------ kswapd0/1133 is trying to acquire lock: ffff888092f622c0 (&delayed_node->mutex){+.+.}, at: __btrfs_release_delayed_node+0x7c/0x5b0 but task is already holding lock: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}: fs_reclaim_acquire.part.91+0x29/0x30 fs_reclaim_acquire+0x19/0x20 kmem_cache_alloc_trace+0x32/0x740 add_block_entry+0x45/0x260 btrfs_ref_tree_mod+0x6e2/0x8b0 btrfs_alloc_tree_block+0x789/0x880 alloc_tree_block_no_bg_flush+0xc6/0xf0 __btrfs_cow_block+0x270/0x940 btrfs_cow_block+0x1ba/0x3a0 btrfs_search_slot+0x999/0x1030 btrfs_insert_empty_items+0x81/0xe0 btrfs_insert_delayed_items+0x128/0x7d0 __btrfs_run_delayed_items+0xf4/0x2a0 btrfs_run_delayed_items+0x13/0x20 btrfs_commit_transaction+0x5cc/0x1390 insert_balance_item.isra.39+0x6b2/0x6e0 btrfs_balance+0x72d/0x18d0 btrfs_ioctl_balance+0x3de/0x4c0 btrfs_ioctl+0x30ab/0x44a0 ksys_ioctl+0xa1/0xe0 __x64_sys_ioctl+0x43/0x50 do_syscall_64+0x77/0x2c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&delayed_node->mutex){+.+.}: __lock_acquire+0x197e/0x2550 lock_acquire+0x103/0x220 __mutex_lock+0x13d/0xce0 mutex_lock_nested+0x1b/0x20 __btrfs_release_delayed_node+0x7c/0x5b0 btrfs_remove_delayed_node+0x49/0x50 btrfs_evict_inode+0x6fc/0x900 evict+0x19a/0x2c0 dispose_list+0xa0/0xe0 prune_icache_sb+0xbd/0xf0 super_cache_scan+0x1b5/0x250 do_shrink_slab+0x1f6/0x530 shrink_slab+0x32e/0x410 shrink_node+0x2a5/0xba0 balance_pgdat+0x4bd/0x8a0 kswapd+0x35a/0x800 kthread+0x1e9/0x210 ret_from_fork+0x3a/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(&delayed_node->mutex); lock(fs_reclaim); lock(&delayed_node->mutex); *** DEADLOCK *** 3 locks held by kswapd0/1133: #0: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30 #1: ffffffff8fc380d8 (shrinker_rwsem){++++}, at: shrink_slab+0x1e8/0x410 #2: ffff8881e0e6c0e8 (&type->s_umount_key#42){++++}, at: trylock_super+0x1b/0x70 stack backtrace: CPU: 2 PID: 1133 Comm: kswapd0 Not tainted 5.6.0-c6f0579d496a+ #53 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: dump_stack+0xc1/0x11a print_circular_bug.isra.38.cold.57+0x145/0x14a check_noncircular+0x2a9/0x2f0 ? print_circular_bug.isra.38+0x130/0x130 ? stack_trace_consume_entry+0x90/0x90 ? save_trace+0x3cc/0x420 __lock_acquire+0x197e/0x2550 ? btrfs_inode_clear_file_extent_range+0x9b/0xb0 ? register_lock_class+0x960/0x960 lock_acquire+0x103/0x220 ? __btrfs_release_delayed_node+0x7c/0x5b0 __mutex_lock+0x13d/0xce0 ? __btrfs_release_delayed_node+0x7c/0x5b0 ? __asan_loadN+0xf/0x20 ? pvclock_clocksource_read+0xeb/0x190 ? __btrfs_release_delayed_node+0x7c/0x5b0 ? mutex_lock_io_nested+0xc20/0xc20 ? __kasan_check_read+0x11/0x20 ? check_chain_key+0x1e6/0x2e0 mutex_lock_nested+0x1b/0x20 ? mutex_lock_nested+0x1b/0x20 __btrfs_release_delayed_node+0x7c/0x5b0 btrfs_remove_delayed_node+0x49/0x50 btrfs_evict_inode+0x6fc/0x900 ? btrfs_setattr+0x840/0x840 ? do_raw_spin_unlock+0xa8/0x140 evict+0x19a/0x2c0 dispose_list+0xa0/0xe0 prune_icache_sb+0xbd/0xf0 ? invalidate_inodes+0x310/0x310 super_cache_scan+0x1b5/0x250 do_shrink_slab+0x1f6/0x530 shrink_slab+0x32e/0x410 ? do_shrink_slab+0x530/0x530 ? do_shrink_slab+0x530/0x530 ? __kasan_check_read+0x11/0x20 ? mem_cgroup_protected+0x13d/0x260 shrink_node+0x2a5/0xba0 balance_pgdat+0x4bd/0x8a0 ? mem_cgroup_shrink_node+0x490/0x490 ? _raw_spin_unlock_irq+0x27/0x40 ? finish_task_switch+0xce/0x390 ? rcu_read_lock_bh_held+0xb0/0xb0 kswapd+0x35a/0x800 ? _raw_spin_unlock_irqrestore+0x4c/0x60 ? balance_pgdat+0x8a0/0x8a0 ? finish_wait+0x110/0x110 ? __kasan_check_read+0x11/0x20 ? __kthread_parkme+0xc6/0xe0 ? balance_pgdat+0x8a0/0x8a0 kthread+0x1e9/0x210 ? kthread_create_worker_on_cpu+0xc0/0xc0 ret_from_fork+0x3a/0x50 This is because we hold that delayed node's mutex while doing tree operations. Fix this by just wrapping the searches in nofs. CC: [email protected] # 4.4+ Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit a866759 ] This reverts commit 64e62bd. This commit ends up causing some lockdep splats due to trying to grab the payload lock while holding the mgr's lock: [ 54.010099] [ 54.011765] ====================================================== [ 54.018670] WARNING: possible circular locking dependency detected [ 54.025577] 5.5.0-rc6-02274-g77381c23ee63 torvalds#47 Not tainted [ 54.031610] ------------------------------------------------------ [ 54.038516] kworker/1:6/1040 is trying to acquire lock: [ 54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.054957] [ 54.054957] but task is already holding lock: [ 54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.071193] [ 54.071193] which lock already depends on the new lock. [ 54.071193] [ 54.080334] [ 54.080334] the existing dependency chain (in reverse order) is: [ 54.088697] [ 54.088697] -> #1 (&mgr->lock){+.+.}: [ 54.094440] __mutex_lock+0xc3/0x498 [ 54.099015] drm_dp_mst_topology_get_port_validated+0x25/0x80 [ 54.106018] drm_dp_update_payload_part1+0xa2/0x2e2 [ 54.112051] intel_mst_pre_enable_dp+0x144/0x18f [ 54.117791] intel_encoders_pre_enable+0x63/0x70 [ 54.123532] hsw_crtc_enable+0xa1/0x722 [ 54.128396] intel_update_crtc+0x50/0x194 [ 54.133455] skl_commit_modeset_enables+0x40c/0x540 [ 54.139485] intel_atomic_commit_tail+0x5f7/0x130d [ 54.145418] intel_atomic_commit+0x2c8/0x2d8 [ 54.150770] drm_atomic_helper_set_config+0x5a/0x70 [ 54.156801] drm_mode_setcrtc+0x2ab/0x833 [ 54.161862] drm_ioctl+0x2e5/0x424 [ 54.166242] vfs_ioctl+0x21/0x2f [ 54.170426] do_vfs_ioctl+0x5fb/0x61e [ 54.175096] ksys_ioctl+0x55/0x75 [ 54.179377] __x64_sys_ioctl+0x1a/0x1e [ 54.184146] do_syscall_64+0x5c/0x6d [ 54.188721] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 54.194946] [ 54.194946] -> #0 (&mgr->payload_lock){+.+.}: [ 54.201463] [ 54.201463] other info that might help us debug this: [ 54.201463] [ 54.210410] Possible unsafe locking scenario: [ 54.210410] [ 54.217025] CPU0 CPU1 [ 54.222082] ---- ---- [ 54.227138] lock(&mgr->lock); [ 54.230643] lock(&mgr->payload_lock); [ 54.237742] lock(&mgr->lock); [ 54.244062] lock(&mgr->payload_lock); [ 54.248346] [ 54.248346] *** DEADLOCK *** [ 54.248346] [ 54.254959] 7 locks held by kworker/1:6/1040: [ 54.259822] #0: ffff888275c4f528 ((wq_completion)events){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.269451] #1: ffffc9000119beb0 ((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.}, at: worker_thread+0x455/0x6e2 [ 54.282768] #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.}, at: i915_hotplug_work_func+0x4b/0x2be [ 54.293368] #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+}, at: i915_hotplug_work_func+0x17e/0x2be [ 54.304061] #4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.}, at: drm_helper_probe_detect_ctx+0x40/0xfd [ 54.314855] #5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x74/0xe2 [ 54.324385] #6: ffff888272af3060 (&mgr->lock){+.+.}, at: drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4 [ 54.334597] [ 54.334597] stack backtrace: [ 54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted 5.5.0-rc6-02274-g77381c23ee63 torvalds#47 [ 54.348893] Hardware name: Google Fizz/Fizz, BIOS Google_Fizz.10139.39.0 01/04/2018 [ 54.357451] Workqueue: events i915_hotplug_work_func [ 54.362995] Call Trace: [ 54.365724] dump_stack+0x71/0x9c [ 54.369427] check_noncircular+0x91/0xbc [ 54.373809] ? __lock_acquire+0xc9e/0xf66 [ 54.378286] ? __lock_acquire+0xc9e/0xf66 [ 54.382763] ? lock_acquire+0x175/0x1ac [ 54.387048] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.393177] ? __mutex_lock+0xc3/0x498 [ 54.397362] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.403492] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.409620] ? drm_dp_dpcd_access+0xd9/0x101 [ 54.414390] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.420517] ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4 [ 54.426645] ? intel_digital_port_connected+0x34d/0x35c [ 54.432482] ? intel_dp_detect+0x227/0x44e [ 54.437056] ? ww_mutex_lock+0x49/0x9a [ 54.441242] ? drm_helper_probe_detect_ctx+0x75/0xfd [ 54.446789] ? intel_encoder_hotplug+0x4b/0x97 [ 54.451752] ? intel_ddi_hotplug+0x61/0x2e0 [ 54.456423] ? mark_held_locks+0x53/0x68 [ 54.460803] ? _raw_spin_unlock_irqrestore+0x3a/0x51 [ 54.466347] ? lockdep_hardirqs_on+0x187/0x1a4 [ 54.471310] ? drm_connector_list_iter_next+0x89/0x9a [ 54.476953] ? i915_hotplug_work_func+0x206/0x2be [ 54.482208] ? worker_thread+0x4d5/0x6e2 [ 54.486587] ? worker_thread+0x455/0x6e2 [ 54.490966] ? queue_work_on+0x64/0x64 [ 54.495151] ? kthread+0x1e9/0x1f1 [ 54.498946] ? queue_work_on+0x64/0x64 [ 54.503130] ? kthread_unpark+0x5e/0x5e [ 54.507413] ? ret_from_fork+0x3a/0x50 The proper fix for this is probably cleanup the VCPI allocations when we're enabling the topology, or on the first payload allocation. For now though, let's just revert. Signed-off-by: Lyude Paul <[email protected]> Fixes: 64e62bd ("drm/dp_mst: Remove VCPI while disabling topology mgr") Cc: Sean Paul <[email protected]> Cc: Wayne Lin <[email protected]> Reviewed-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 696ac2e ] Similar to commit 0266d81 ("acpi/processor: Prevent cpu hotplug deadlock") except this is for acpi_processor_ffh_cstate_probe(): "The problem is that the work is scheduled on the current CPU from the hotplug thread associated with that CPU. It's not required to invoke these functions via the workqueue because the hotplug thread runs on the target CPU already. Check whether current is a per cpu thread pinned on the target CPU and invoke the function directly to avoid the workqueue." WARNING: possible circular locking dependency detected ------------------------------------------------------ cpuhp/1/15 is trying to acquire lock: ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630 but task is already holding lock: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x3e/0xc0 irq_calc_affinity_vectors+0x5f/0x91 __pci_enable_msix_range+0x10f/0x9a0 pci_alloc_irq_vectors_affinity+0x13e/0x1f0 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208 pqi_ctrl_init+0x72f/0x1618 [smartpqi] pqi_pci_probe.cold.63+0x882/0x892 [smartpqi] local_pci_probe+0x7a/0xc0 work_for_cpu_fn+0x2e/0x50 process_one_work+0x57e/0xb90 worker_thread+0x363/0x5b0 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 other info that might help us debug this: Chain exists of: (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuidle_lock); lock(cpuhp_state-up); lock(cpuidle_lock); lock((work_completion)(&wfc.work)); *** DEADLOCK *** 3 locks held by cpuhp/1/15: #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 Call Trace: dump_stack+0xa0/0xea print_circular_bug.cold.52+0x147/0x14c check_noncircular+0x295/0x2d0 __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 Signed-off-by: Qian Cai <[email protected]> Tested-by: Borislav Petkov <[email protected]> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit d3ec10a upstream. A lockdep circular locking dependency report was seen when running a keyutils test: [12537.027242] ====================================================== [12537.059309] WARNING: possible circular locking dependency detected [12537.088148] 4.18.0-147.7.1.el8_1.x86_64+debug #1 Tainted: G OE --------- - - [12537.125253] ------------------------------------------------------ [12537.153189] keyctl/25598 is trying to acquire lock: [12537.175087] 000000007c39f96c (&mm->mmap_sem){++++}, at: __might_fault+0xc4/0x1b0 [12537.208365] [12537.208365] but task is already holding lock: [12537.234507] 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220 [12537.270476] [12537.270476] which lock already depends on the new lock. [12537.270476] [12537.307209] [12537.307209] the existing dependency chain (in reverse order) is: [12537.340754] [12537.340754] -> #3 (&type->lock_class){++++}: [12537.367434] down_write+0x4d/0x110 [12537.385202] __key_link_begin+0x87/0x280 [12537.405232] request_key_and_link+0x483/0xf70 [12537.427221] request_key+0x3c/0x80 [12537.444839] dns_query+0x1db/0x5a5 [dns_resolver] [12537.468445] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs] [12537.496731] cifs_reconnect+0xe04/0x2500 [cifs] [12537.519418] cifs_readv_from_socket+0x461/0x690 [cifs] [12537.546263] cifs_read_from_socket+0xa0/0xe0 [cifs] [12537.573551] cifs_demultiplex_thread+0x311/0x2db0 [cifs] [12537.601045] kthread+0x30c/0x3d0 [12537.617906] ret_from_fork+0x3a/0x50 [12537.636225] [12537.636225] -> #2 (root_key_user.cons_lock){+.+.}: [12537.664525] __mutex_lock+0x105/0x11f0 [12537.683734] request_key_and_link+0x35a/0xf70 [12537.705640] request_key+0x3c/0x80 [12537.723304] dns_query+0x1db/0x5a5 [dns_resolver] [12537.746773] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs] [12537.775607] cifs_reconnect+0xe04/0x2500 [cifs] [12537.798322] cifs_readv_from_socket+0x461/0x690 [cifs] [12537.823369] cifs_read_from_socket+0xa0/0xe0 [cifs] [12537.847262] cifs_demultiplex_thread+0x311/0x2db0 [cifs] [12537.873477] kthread+0x30c/0x3d0 [12537.890281] ret_from_fork+0x3a/0x50 [12537.908649] [12537.908649] -> #1 (&tcp_ses->srv_mutex){+.+.}: [12537.935225] __mutex_lock+0x105/0x11f0 [12537.954450] cifs_call_async+0x102/0x7f0 [cifs] [12537.977250] smb2_async_readv+0x6c3/0xc90 [cifs] [12538.000659] cifs_readpages+0x120a/0x1e50 [cifs] [12538.023920] read_pages+0xf5/0x560 [12538.041583] __do_page_cache_readahead+0x41d/0x4b0 [12538.067047] ondemand_readahead+0x44c/0xc10 [12538.092069] filemap_fault+0xec1/0x1830 [12538.111637] __do_fault+0x82/0x260 [12538.129216] do_fault+0x419/0xfb0 [12538.146390] __handle_mm_fault+0x862/0xdf0 [12538.167408] handle_mm_fault+0x154/0x550 [12538.187401] __do_page_fault+0x42f/0xa60 [12538.207395] do_page_fault+0x38/0x5e0 [12538.225777] page_fault+0x1e/0x30 [12538.243010] [12538.243010] -> #0 (&mm->mmap_sem){++++}: [12538.267875] lock_acquire+0x14c/0x420 [12538.286848] __might_fault+0x119/0x1b0 [12538.306006] keyring_read_iterator+0x7e/0x170 [12538.327936] assoc_array_subtree_iterate+0x97/0x280 [12538.352154] keyring_read+0xe9/0x110 [12538.370558] keyctl_read_key+0x1b9/0x220 [12538.391470] do_syscall_64+0xa5/0x4b0 [12538.410511] entry_SYSCALL_64_after_hwframe+0x6a/0xdf [12538.435535] [12538.435535] other info that might help us debug this: [12538.435535] [12538.472829] Chain exists of: [12538.472829] &mm->mmap_sem --> root_key_user.cons_lock --> &type->lock_class [12538.472829] [12538.524820] Possible unsafe locking scenario: [12538.524820] [12538.551431] CPU0 CPU1 [12538.572654] ---- ---- [12538.595865] lock(&type->lock_class); [12538.613737] lock(root_key_user.cons_lock); [12538.644234] lock(&type->lock_class); [12538.672410] lock(&mm->mmap_sem); [12538.687758] [12538.687758] *** DEADLOCK *** [12538.687758] [12538.714455] 1 lock held by keyctl/25598: [12538.732097] #0: 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220 [12538.770573] [12538.770573] stack backtrace: [12538.790136] CPU: 2 PID: 25598 Comm: keyctl Kdump: loaded Tainted: G [12538.844855] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015 [12538.881963] Call Trace: [12538.892897] dump_stack+0x9a/0xf0 [12538.907908] print_circular_bug.isra.25.cold.50+0x1bc/0x279 [12538.932891] ? save_trace+0xd6/0x250 [12538.948979] check_prev_add.constprop.32+0xc36/0x14f0 [12538.971643] ? keyring_compare_object+0x104/0x190 [12538.992738] ? check_usage+0x550/0x550 [12539.009845] ? sched_clock+0x5/0x10 [12539.025484] ? sched_clock_cpu+0x18/0x1e0 [12539.043555] __lock_acquire+0x1f12/0x38d0 [12539.061551] ? trace_hardirqs_on+0x10/0x10 [12539.080554] lock_acquire+0x14c/0x420 [12539.100330] ? __might_fault+0xc4/0x1b0 [12539.119079] __might_fault+0x119/0x1b0 [12539.135869] ? __might_fault+0xc4/0x1b0 [12539.153234] keyring_read_iterator+0x7e/0x170 [12539.172787] ? keyring_read+0x110/0x110 [12539.190059] assoc_array_subtree_iterate+0x97/0x280 [12539.211526] keyring_read+0xe9/0x110 [12539.227561] ? keyring_gc_check_iterator+0xc0/0xc0 [12539.249076] keyctl_read_key+0x1b9/0x220 [12539.266660] do_syscall_64+0xa5/0x4b0 [12539.283091] entry_SYSCALL_64_after_hwframe+0x6a/0xdf One way to prevent this deadlock scenario from happening is to not allow writing to userspace while holding the key semaphore. Instead, an internal buffer is allocated for getting the keys out from the read method first before copying them out to userspace without holding the lock. That requires taking out the __user modifier from all the relevant read methods as well as additional changes to not use any userspace write helpers. That is, 1) The put_user() call is replaced by a direct copy. 2) The copy_to_user() call is replaced by memcpy(). 3) All the fault handling code is removed. Compiling on a x86-64 system, the size of the rxrpc_read() function is reduced from 3795 bytes to 2384 bytes with this patch. Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Waiman Long <[email protected]> Signed-off-by: David Howells <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 056ad39 upstream. FuzzUSB (a variant of syzkaller) found a free-while-still-in-use bug in the USB scatter-gather library: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] BUG: KASAN: use-after-free in usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27 CPU: 1 PID: 27 Comm: kworker/u4:1 Not tainted 5.5.11 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: scsi_tmf_2 scmd_eh_abort_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x153/0x1cb mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x152/0x1b0 mm/kasan/generic.c:192 __kasan_check_read+0x11/0x20 mm/kasan/common.c:95 atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 usb_unlink_urb+0x72/0xb0 drivers/usb/core/urb.c:657 usb_sg_cancel+0x14e/0x290 drivers/usb/core/message.c:602 usb_stor_stop_transport+0x5e/0xa0 drivers/usb/storage/transport.c:937 This bug occurs when cancellation of the S-G transfer races with transfer completion. When that happens, usb_sg_cancel() may continue to access the transfer's URBs after usb_sg_wait() has freed them. The bug is caused by the fact that usb_sg_cancel() does not take any sort of reference to the transfer, and so there is nothing to prevent the URBs from being deallocated while the routine is trying to use them. The fix is to take such a reference by incrementing the transfer's io->count field while the cancellation is in progres and decrementing it afterward. The transfer's URBs are not deallocated until io->complete is triggered, which happens when io->count reaches zero. Signed-off-by: Alan Stern <[email protected]> Reported-and-tested-by: Kyungtae Kim <[email protected]> CC: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

…f fs_info::journal_info commit fcc9973 upstream. [BUG] One run of btrfs/063 triggered the following lockdep warning: ============================================ WARNING: possible recursive locking detected 5.6.0-rc7-custom+ torvalds#48 Not tainted -------------------------------------------- kworker/u24:0/7 is trying to acquire lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] but task is already holding lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_internal#2); lock(sb_internal#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u24:0/7: #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80 #1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80 #2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] #3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs] stack backtrace: CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ torvalds#48 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] Call Trace: dump_stack+0xc2/0x11a __lock_acquire.cold+0xce/0x214 lock_acquire+0xe6/0x210 __sb_start_write+0x14e/0x290 start_transaction+0x66c/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] find_free_extent+0x1504/0x1a50 [btrfs] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] btrfs_alloc_tree_block+0x1ac/0x570 [btrfs] btrfs_copy_root+0x213/0x580 [btrfs] create_reloc_root+0x3bd/0x470 [btrfs] btrfs_init_reloc_root+0x2d2/0x310 [btrfs] record_root_in_trans+0x191/0x1d0 [btrfs] btrfs_record_root_in_trans+0x90/0xd0 [btrfs] start_transaction+0x16e/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs] finish_ordered_fn+0x15/0x20 [btrfs] btrfs_work_helper+0x116/0x9a0 [btrfs] process_one_work+0x632/0xb80 worker_thread+0x80/0x690 kthread+0x1a3/0x1f0 ret_from_fork+0x27/0x50 It's pretty hard to reproduce, only one hit so far. [CAUSE] This is because we're calling btrfs_join_transaction() without re-using the current running one: btrfs_finish_ordered_io() |- btrfs_join_transaction() <<< Call #1 |- btrfs_record_root_in_trans() |- btrfs_reserve_extent() |- btrfs_join_transaction() <<< Call #2 Normally such btrfs_join_transaction() call should re-use the existing one, without trying to re-start a transaction. But the problem is, in btrfs_join_transaction() call #1, we call btrfs_record_root_in_trans() before initializing current::journal_info. And in btrfs_join_transaction() call #2, we're relying on current::journal_info to avoid such deadlock. [FIX] Call btrfs_record_root_in_trans() after we have initialized current::journal_info. CC: [email protected] # 4.4+ Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit e5a15e1 upstream. The following kernel panic was captured when running nfs server over ocfs2, at that time ocfs2_test_inode_bit() was checking whether one inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its "suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from //global_inode_alloc, but here it wrongly assumed that it was got from per slot inode alloctor which would cause array overflow and trigger kernel panic. BUG: unable to handle kernel paging request at 0000000000001088 IP: [<ffffffff816f6898>] _raw_spin_lock+0x18/0xf0 PGD 1e06ba067 PUD 1e9e7d067 PMD 0 Oops: 0002 [#1] SMP CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 #2 Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018 RIP: _raw_spin_lock+0x18/0xf0 RSP: e02b:ffff88005ae97908 EFLAGS: 00010206 RAX: ffff88005ae98000 RBX: 0000000000001088 RCX: 0000000000000000 RDX: 0000000000020000 RSI: 0000000000000009 RDI: 0000000000001088 RBP: ffff88005ae97928 R08: 0000000000000000 R09: ffff880212878e00 R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000001088 R13: ffff8800063c0aa8 R14: ffff8800650c27d0 R15: 000000000000ffff FS: 0000000000000000(0000) GS:ffff880218180000(0000) knlGS:ffff880218180000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001088 CR3: 00000002033d0000 CR4: 0000000000042660 Call Trace: igrab+0x1e/0x60 ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2] ocfs2_test_inode_bit+0x328/0xa00 [ocfs2] ocfs2_get_parent+0xba/0x3e0 [ocfs2] reconnect_path+0xb5/0x300 exportfs_decode_fh+0xf6/0x2b0 fh_verify+0x350/0x660 [nfsd] nfsd4_putfh+0x4d/0x60 [nfsd] nfsd4_proc_compound+0x3d3/0x6f0 [nfsd] nfsd_dispatch+0xe0/0x290 [nfsd] svc_process_common+0x412/0x6a0 [sunrpc] svc_process+0x123/0x210 [sunrpc] nfsd+0xff/0x170 [nfsd] kthread+0xcb/0xf0 ret_from_fork+0x61/0x90 Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00 <f0> 0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6 RIP _raw_spin_lock+0x18/0xf0 CR2: 0000000000001088 ---[ end trace 7264463cd1aac8f9 ]--- Kernel panic - not syncing: Fatal exception Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Junxiao Bi <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Joel Becker <[email protected]> Cc: Jun Piao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 440ab9e ] At times when I'm using kgdb I see a splat on my console about suspicious RCU usage. I managed to come up with a case that could reproduce this that looked like this: WARNING: suspicious RCU usage 5.7.0-rc4+ torvalds#609 Not tainted ----------------------------- kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by swapper/0/1: #0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c #1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac #2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac stack backtrace: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ torvalds#609 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x1b8 show_stack+0x1c/0x24 dump_stack+0xd4/0x134 lockdep_rcu_suspicious+0xf0/0x100 find_task_by_pid_ns+0x5c/0x80 getthread+0x8c/0xb0 gdb_serial_stub+0x9d4/0xd04 kgdb_cpu_enter+0x284/0x7ac kgdb_handle_exception+0x174/0x20c kgdb_brk_fn+0x24/0x30 call_break_hook+0x6c/0x7c brk_handler+0x20/0x5c do_debug_exception+0x1c8/0x22c el1_sync_handler+0x3c/0xe4 el1_sync+0x7c/0x100 rpmh_rsc_probe+0x38/0x420 platform_drv_probe+0x94/0xb4 really_probe+0x134/0x300 driver_probe_device+0x68/0x100 __device_attach_driver+0x90/0xa8 bus_for_each_drv+0x84/0xcc __device_attach+0xb4/0x13c device_initial_probe+0x18/0x20 bus_probe_device+0x38/0x98 device_add+0x38c/0x420 If I understand properly we should just be able to blanket kgdb under one big RCU read lock and the problem should go away. We'll add it to the beast-of-a-function known as kgdb_cpu_enter(). With this I no longer get any splats and things seem to work fine. Signed-off-by: Douglas Anderson <[email protected]> Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeid Signed-off-by: Daniel Thompson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Link: https://lore.kernel.org/linux-trace-devel/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e0f1a30 ] When, at probe time, an SCMI communication failure inhibits the capacity to query power domains states, such domains should be skipped. Registering partially initialized SCMI power domains with genpd will causes kernel panic. arm-scmi timed out in resp(caller: scmi_power_state_get+0xa4/0xd0) scmi-power-domain scmi_dev.2: failed to get state for domain 9 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000009f3691000 [0000000000000000] pgd=00000009f1ca0003, p4d=00000009f1ca0003, pud=00000009f35ea003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP CPU: 2 PID: 381 Comm: bash Not tainted 5.8.0-rc1-00011-gebd118c2cca8 #2 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Jan 3 2020 Internal error: Oops: 96000006 [#1] PREEMPT SMP pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--) pc : of_genpd_add_provider_onecell+0x98/0x1f8 lr : of_genpd_add_provider_onecell+0x48/0x1f8 Call trace: of_genpd_add_provider_onecell+0x98/0x1f8 scmi_pm_domain_probe+0x174/0x1e8 scmi_dev_probe+0x90/0xe0 really_probe+0xe4/0x448 driver_probe_device+0xfc/0x168 device_driver_attach+0x7c/0x88 bind_store+0xe8/0x128 drv_attr_store+0x2c/0x40 sysfs_kf_write+0x4c/0x60 kernfs_fop_write+0x114/0x230 __vfs_write+0x24/0x50 vfs_write+0xbc/0x1e0 ksys_write+0x70/0xf8 __arm64_sys_write+0x24/0x30 el0_svc_common.constprop.3+0x94/0x160 do_el0_svc+0x2c/0x98 el0_sync_handler+0x148/0x1a8 el0_sync+0x158/0x180 Do not register any power domain that failed to be queried with genpd. Fixes: 898216c ("firmware: arm_scmi: add device power domain support using genpd") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Cristian Marussi <[email protected]> Signed-off-by: Sudeep Holla <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 3c2214b ] Removing the pcrypt module triggers this: general protection fault, probably for non-canonical address 0xdead000000000122 CPU: 5 PID: 264 Comm: modprobe Not tainted 5.6.0+ STMicroelectronics#2 Hardware name: QEMU Standard PC RIP: 0010:__cpuhp_state_remove_instance+0xcc/0x120 Call Trace: padata_sysfs_release+0x74/0xce kobject_put+0x81/0xd0 padata_free+0x12/0x20 pcrypt_exit+0x43/0x8ee [pcrypt] padata instances wrongly use the same hlist node for the online and dead states, so __padata_free()'s second cpuhp remove call chokes on the node that the first poisoned. cpuhp multi-instance callbacks only walk forward in cpuhp_step->list and the same node is linked in both the online and dead lists, so the list corruption that results from padata_alloc() adding the node to a second list without removing it from the first doesn't cause problems as long as no instances are freed. Avoid the issue by giving each state its own node. Fixes: 894c9ef ("padata: validate cpumask without removed CPU during offline") Signed-off-by: Daniel Jordan <[email protected]> Cc: Herbert Xu <[email protected]> Cc: Steffen Klassert <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] # v5.4+ Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit fd68987 ] Alloc new map and request for new hardware queue when increse hardware queue count. Before this patch, it will show a warning for each new hardware queue, but it's not enough, these hctx have no maps and reqeust, when a bio was mapped to these hardware queue, it will trigger kernel panic when get request from these hctx. Test environment: * A NVMe disk supports 128 io queues * 96 cpus in system A corner case can always trigger this panic, there are 96 io queues allocated for HCTX_TYPE_DEFAULT type, the corresponding kernel log: nvme nvme0: 96/0/0 default/read/poll queues. Now we set nvme write queues to 96, then nvme will alloc others(32) queues for read, but blk_mq_update_nr_hw_queues does not alloc map and request for these new added io queues. So when process read nvme disk, it will trigger kernel panic when get request from these hardware context. Reproduce script: nr=$(expr `cat /sys/block/nvme0n1/device/queue_count` - 1) echo $nr > /sys/module/nvme/parameters/write_queues echo 1 > /sys/block/nvme0n1/device/reset_controller dd if=/dev/nvme0n1 of=/dev/null bs=4K count=1 [ 8040.805626] ------------[ cut here ]------------ [ 8040.805627] WARNING: CPU: 82 PID: 12921 at block/blk-mq.c:2578 blk_mq_map_swqueue+0x2b6/0x2c0 [ 8040.805627] Modules linked in: nvme nvme_core nf_conntrack_netlink xt_addrtype br_netfilter overlay xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nf_conntrack_tftp nft_masq nf_tables_set nft_fib_inet nft_f ib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack tun bridge nf_defrag_ipv6 nf_defrag_ipv4 stp llc ip6_tables ip_tables nft_compat rfkill ip_set nf_tables nfne tlink sunrpc intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass ipmi_ssif crct10dif_pclmul crc32_pclmul iTCO_wdt iTCO_vendor_support ghash_clmulni_intel intel_ cstate intel_uncore raid0 joydev intel_rapl_perf ipmi_si pcspkr mei_me ioatdma sg ipmi_devintf mei i2c_i801 dca lpc_ich ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c sd_mod ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm d rm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops [ 8040.805637] ahci drm i40e libahci crc32c_intel libata t10_pi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nvme_core] [ 8040.805640] CPU: 82 PID: 12921 Comm: kworker/u194:2 Kdump: loaded Tainted: G W 5.6.0-rc5.78317c+ STMicroelectronics#2 [ 8040.805640] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019 [ 8040.805641] Workqueue: nvme-reset-wq nvme_reset_work [nvme] [ 8040.805642] RIP: 0010:blk_mq_map_swqueue+0x2b6/0x2c0 [ 8040.805643] Code: 00 00 00 00 00 41 83 c5 01 44 39 6d 50 77 b8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 8b bb 98 00 00 00 89 d6 e8 8c 81 03 00 eb 83 <0f> 0b e9 52 ff ff ff 0f 1f 00 0f 1f 44 00 00 41 57 48 89 f1 41 56 [ 8040.805643] RSP: 0018:ffffba590d2e7d48 EFLAGS: 00010246 [ 8040.805643] RAX: 0000000000000000 RBX: ffff9f013e1ba800 RCX: 000000000000003d [ 8040.805644] RDX: ffff9f00ffff6000 RSI: 0000000000000003 RDI: ffff9ed200246d90 [ 8040.805644] RBP: ffff9f00f6a79860 R08: 0000000000000000 R09: 000000000000003d [ 8040.805645] R10: 0000000000000001 R11: ffff9f0138c3d000 R12: ffff9f00fb3a9008 [ 8040.805645] R13: 000000000000007f R14: ffffffff96822660 R15: 000000000000005f [ 8040.805645] FS: 0000000000000000(0000) GS:ffff9f013fa80000(0000) knlGS:0000000000000000 [ 8040.805646] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8040.805646] CR2: 00007f7f397fa6f8 CR3: 0000003d8240a002 CR4: 00000000007606e0 [ 8040.805647] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8040.805647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8040.805647] PKRU: 55555554 [ 8040.805647] Call Trace: [ 8040.805649] blk_mq_update_nr_hw_queues+0x31b/0x390 [ 8040.805650] nvme_reset_work+0xb4b/0xeab [nvme] [ 8040.805651] process_one_work+0x1a7/0x370 [ 8040.805652] worker_thread+0x1c9/0x380 [ 8040.805653] ? max_active_store+0x80/0x80 [ 8040.805655] kthread+0x112/0x130 [ 8040.805656] ? __kthread_parkme+0x70/0x70 [ 8040.805657] ret_from_fork+0x35/0x40 [ 8040.805658] ---[ end trace b5f13b1e73ccb5d3 ]--- [ 8229.365135] BUG: kernel NULL pointer dereference, address: 0000000000000004 [ 8229.365165] #PF: supervisor read access in kernel mode [ 8229.365178] #PF: error_code(0x0000) - not-present page [ 8229.365191] PGD 0 P4D 0 [ 8229.365201] Oops: 0000 [STMicroelectronics#1] SMP PTI [ 8229.365212] CPU: 77 PID: 13024 Comm: dd Kdump: loaded Tainted: G W 5.6.0-rc5.78317c+ STMicroelectronics#2 [ 8229.365232] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019 [ 8229.365253] RIP: 0010:blk_mq_get_tag+0x227/0x250 [ 8229.365265] Code: 44 24 04 44 01 e0 48 8b 74 24 38 65 48 33 34 25 28 00 00 00 75 33 48 83 c4 40 5b 5d 41 5c 41 5d 41 5e c3 48 8d 68 10 4c 89 ef <44> 8b 60 04 48 89 ee e8 dd f9 ff ff 83 f8 ff 75 c8 e9 67 fe ff ff [ 8229.365304] RSP: 0018:ffffba590e977970 EFLAGS: 00010246 [ 8229.365317] RAX: 0000000000000000 RBX: ffff9f00f6a79860 RCX: ffffba590e977998 [ 8229.365333] RDX: 0000000000000000 RSI: ffff9f012039b140 RDI: ffffba590e977a38 [ 8229.365349] RBP: 0000000000000010 R08: ffffda58ff94e190 R09: ffffda58ff94e198 [ 8229.365365] R10: 0000000000000011 R11: ffff9f00f6a79860 R12: 0000000000000000 [ 8229.365381] R13: ffffba590e977a38 R14: ffff9f012039b140 R15: 0000000000000001 [ 8229.365397] FS: 00007f481c230580(0000) GS:ffff9f013f940000(0000) knlGS:0000000000000000 [ 8229.365415] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8229.365428] CR2: 0000000000000004 CR3: 0000005f35e26004 CR4: 00000000007606e0 [ 8229.365444] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8229.365460] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8229.365476] PKRU: 55555554 [ 8229.365484] Call Trace: [ 8229.365498] ? finish_wait+0x80/0x80 [ 8229.365512] blk_mq_get_request+0xcb/0x3f0 [ 8229.365525] blk_mq_make_request+0x143/0x5d0 [ 8229.365538] generic_make_request+0xcf/0x310 [ 8229.365553] ? scan_shadow_nodes+0x30/0x30 [ 8229.365564] submit_bio+0x3c/0x150 [ 8229.365576] mpage_readpages+0x163/0x1a0 [ 8229.365588] ? blkdev_direct_IO+0x490/0x490 [ 8229.365601] read_pages+0x6b/0x190 [ 8229.365612] __do_page_cache_readahead+0x1c1/0x1e0 [ 8229.365626] ondemand_readahead+0x182/0x2f0 [ 8229.365639] generic_file_buffered_read+0x590/0xab0 [ 8229.365655] new_sync_read+0x12a/0x1c0 [ 8229.365666] vfs_read+0x8a/0x140 [ 8229.365676] ksys_read+0x59/0xd0 [ 8229.365688] do_syscall_64+0x55/0x1d0 [ 8229.365700] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Ming Lei <[email protected]> Signed-off-by: Weiping Zhang <[email protected]> Tested-by: Weiping Zhang <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 6dcde60 ] Dave Airlie reported the following lockdep complaint: > ====================================================== > WARNING: possible circular locking dependency detected > 5.7.0-0.rc5.20200515git1ae7efb38854.1.fc33.x86_64 STMicroelectronics#1 Not tainted > ------------------------------------------------------ > kswapd0/159 is trying to acquire lock: > ffff9b38d01a4470 (&xfs_nondir_ilock_class){++++}-{3:3}, > at: xfs_ilock+0xde/0x2c0 [xfs] > > but task is already holding lock: > ffffffffbbb8bd00 (fs_reclaim){+.+.}-{0:0}, at: > __fs_reclaim_acquire+0x5/0x30 > > which lock already depends on the new lock. > > > the existing dependency chain (in reverse order) is: > > -> STMicroelectronics#1 (fs_reclaim){+.+.}-{0:0}: > fs_reclaim_acquire+0x34/0x40 > __kmalloc+0x4f/0x270 > kmem_alloc+0x93/0x1d0 [xfs] > kmem_alloc_large+0x4c/0x130 [xfs] > xfs_attr_copy_value+0x74/0xa0 [xfs] > xfs_attr_get+0x9d/0xc0 [xfs] > xfs_get_acl+0xb6/0x200 [xfs] > get_acl+0x81/0x160 > posix_acl_xattr_get+0x3f/0xd0 > vfs_getxattr+0x148/0x170 > getxattr+0xa7/0x240 > path_getxattr+0x52/0x80 > do_syscall_64+0x5c/0xa0 > entry_SYSCALL_64_after_hwframe+0x49/0xb3 > > -> #0 (&xfs_nondir_ilock_class){++++}-{3:3}: > __lock_acquire+0x1257/0x20d0 > lock_acquire+0xb0/0x310 > down_write_nested+0x49/0x120 > xfs_ilock+0xde/0x2c0 [xfs] > xfs_reclaim_inode+0x3f/0x400 [xfs] > xfs_reclaim_inodes_ag+0x20b/0x410 [xfs] > xfs_reclaim_inodes_nr+0x31/0x40 [xfs] > super_cache_scan+0x190/0x1e0 > do_shrink_slab+0x184/0x420 > shrink_slab+0x182/0x290 > shrink_node+0x174/0x680 > balance_pgdat+0x2d0/0x5f0 > kswapd+0x21f/0x510 > kthread+0x131/0x150 > ret_from_fork+0x3a/0x50 > > other info that might help us debug this: > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(fs_reclaim); > lock(&xfs_nondir_ilock_class); > lock(fs_reclaim); > lock(&xfs_nondir_ilock_class); > > *** DEADLOCK *** > > 4 locks held by kswapd0/159: > #0: ffffffffbbb8bd00 (fs_reclaim){+.+.}-{0:0}, at: > __fs_reclaim_acquire+0x5/0x30 > STMicroelectronics#1: ffffffffbbb7cef8 (shrinker_rwsem){++++}-{3:3}, at: > shrink_slab+0x115/0x290 > STMicroelectronics#2: ffff9b39f07a50e8 > (&type->s_umount_key#56){++++}-{3:3}, at: super_cache_scan+0x38/0x1e0 > STMicroelectronics#3: ffff9b39f077f258 > (&pag->pag_ici_reclaim_lock){+.+.}-{3:3}, at: > xfs_reclaim_inodes_ag+0x82/0x410 [xfs] This is a known false positive because inodes cannot simultaneously be getting reclaimed and the target of a getxattr operation, but lockdep doesn't know that. We can (selectively) shut up lockdep until either it gets smarter or we change inode reclaim not to require the ILOCK by applying a stupid GFP_NOLOCKDEP bandaid. Reported-by: Dave Airlie <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]> Tested-by: Dave Airlie <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit dd7fc55 ] When station connected to AP, and run TX traffic such as TCP/UDP, and system enter suspend state, then mac80211 call ath10k_flush with set drop flag, recently it only send wmi peer flush to firmware and firmware will flush all pending TX packets, for PCIe, firmware will indicate the TX packets status to ath10k, and then ath10k indicate to mac80211 TX complete with the status, then all the packets has been flushed at this moment. For SDIO chip, it is different, its TX complete indication is disabled by default, and it has a tx queue in ath10k, and its tx credit control is enabled, total tx credit is 96, when its credit is not sufficient, then the packets will buffered in the tx queue of ath10k, max packets is TARGET_TLV_NUM_MSDU_DESC_HL which is 1024, for SDIO, when mac80211 call ath10k_flush with set drop flag, maybe it have pending packets in tx queue of ath10k, and if it does not have sufficient tx credit, the packets will stay in queue untill tx credit report from firmware, if it is a noisy environment, tx speed is low and the tx credit report from firmware will delay more time, then the num_pending_tx will remain > 0 untill all packets send to firmware. After the 1st ath10k_flush, mac80211 will call the 2nd ath10k_flush without set drop flag immediately, then it will call to ath10k_mac_wait_tx_complete, and it wait untill num_pending_tx become to 0, in noisy environment, it is esay to wait about near 5 seconds, then it cause the suspend take long time. 1st and 2nd callstack of ath10k_flush [ 303.740427] ath10k_sdio mmc1:0001:1: ath10k_flush drop:1, pending:0-0 [ 303.740495] ------------[ cut here ]------------ [ 303.740739] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core] [ 303.740757] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer [ 303.740914] kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core] [ 303.741009] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G W 4.19.95 STMicroelectronics#2 [ 303.741027] Hardware name: MediaTek krane sku176 board (DT) [ 303.741061] Workqueue: events_unbound async_run_entry_fn [ 303.741086] pstate: 60000005 (nZCv daif -PAN -UAO) [ 303.741166] pc : ath10k_flush+0x54/0x104 [ath10k_core] [ 303.741244] lr : ath10k_flush+0x54/0x104 [ath10k_core] [ 303.741260] sp : ffffffdf080e77a0 [ 303.741276] x29: ffffffdf080e77a0 x28: ffffffdef3730040 [ 303.741300] x27: ffffff907c2240a0 x26: ffffffde6ff39afc [ 303.741321] x25: ffffffdef3730040 x24: ffffff907bf61018 [ 303.741343] x23: ffffff907c2240a0 x22: ffffffde6ff39a50 [ 303.741364] x21: 0000000000000001 x20: ffffffde6ff39a50 [ 303.741385] x19: ffffffde6bac2420 x18: 0000000000017200 [ 303.741407] x17: ffffff907c24a000 x16: 0000000000000037 [ 303.741428] x15: ffffff907b49a568 x14: ffffff907cf332c1 [ 303.741476] x13: 00000000000922e4 x12: 0000000000000000 [ 303.741497] x11: 0000000000000001 x10: 0000000000000007 [ 303.741518] x9 : f2256b8c1de4bc00 x8 : f2256b8c1de4bc00 [ 303.741539] x7 : ffffff907ab5e764 x6 : 0000000000000000 [ 303.741560] x5 : 0000000000000080 x4 : 0000000000000001 [ 303.741582] x3 : ffffffdf080e74a8 x2 : ffffff907aa91244 [ 303.741603] x1 : ffffffdf080e74a8 x0 : 0000000000000024 [ 303.741624] Call trace: [ 303.741701] ath10k_flush+0x54/0x104 [ath10k_core] [ 303.741941] __ieee80211_flush_queues+0x1dc/0x358 [mac80211] [ 303.742098] ieee80211_flush_queues+0x34/0x44 [mac80211] [ 303.742253] ieee80211_set_disassoc+0xc0/0x5ec [mac80211] [ 303.742399] ieee80211_mgd_deauth+0x720/0x7d4 [mac80211] [ 303.742535] ieee80211_deauth+0x24/0x30 [mac80211] [ 303.742720] cfg80211_mlme_deauth+0x250/0x3bc [cfg80211] [ 303.742849] cfg80211_mlme_down+0x90/0xd0 [cfg80211] [ 303.742971] cfg80211_disconnect+0x340/0x3a0 [cfg80211] [ 303.743087] __cfg80211_leave+0xe4/0x17c [cfg80211] [ 303.743203] cfg80211_leave+0x38/0x50 [cfg80211] [ 303.743319] wiphy_suspend+0x84/0x5bc [cfg80211] [ 303.743335] dpm_run_callback+0x170/0x304 [ 303.743346] __device_suspend+0x2dc/0x3e8 [ 303.743356] async_suspend+0x2c/0xb0 [ 303.743370] async_run_entry_fn+0x48/0xf8 [ 303.743383] process_one_work+0x304/0x604 [ 303.743394] worker_thread+0x248/0x3f4 [ 303.743403] kthread+0x120/0x130 [ 303.743416] ret_from_fork+0x10/0x18 [ 303.743812] ath10k_sdio mmc1:0001:1: ath10k_flush drop:0, pending:0-0 [ 303.743858] ------------[ cut here ]------------ [ 303.744057] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core] [ 303.744075] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core] [ 303.744256] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G W 4.19.95 STMicroelectronics#2 [ 303.744273] Hardware name: MediaTek krane sku176 board (DT) [ 303.744301] Workqueue: events_unbound async_run_entry_fn [ 303.744325] pstate: 60000005 (nZCv daif -PAN -UAO) [ 303.744403] pc : ath10k_flush+0x54/0x104 [ath10k_core] [ 303.744480] lr : ath10k_flush+0x54/0x104 [ath10k_core] [ 303.744496] sp : ffffffdf080e77a0 [ 303.744512] x29: ffffffdf080e77a0 x28: ffffffdef3730040 [ 303.744534] x27: ffffff907c2240a0 x26: ffffffde6ff39afc [ 303.744556] x25: ffffffdef3730040 x24: ffffff907bf61018 [ 303.744577] x23: ffffff907c2240a0 x22: ffffffde6ff39a50 [ 303.744598] x21: 0000000000000000 x20: ffffffde6ff39a50 [ 303.744620] x19: ffffffde6bac2420 x18: 000000000001831c [ 303.744641] x17: ffffff907c24a000 x16: 0000000000000037 [ 303.744662] x15: ffffff907b49a568 x14: ffffff907cf332c1 [ 303.744683] x13: 00000000000922ea x12: 0000000000000000 [ 303.744704] x11: 0000000000000001 x10: 0000000000000007 [ 303.744747] x9 : f2256b8c1de4bc00 x8 : f2256b8c1de4bc00 [ 303.744768] x7 : ffffff907ab5e764 x6 : 0000000000000000 [ 303.744789] x5 : 0000000000000080 x4 : 0000000000000001 [ 303.744810] x3 : ffffffdf080e74a8 x2 : ffffff907aa91244 [ 303.744831] x1 : ffffffdf080e74a8 x0 : 0000000000000024 [ 303.744853] Call trace: [ 303.744929] ath10k_flush+0x54/0x104 [ath10k_core] [ 303.745098] __ieee80211_flush_queues+0x1dc/0x358 [mac80211] [ 303.745277] ieee80211_flush_queues+0x34/0x44 [mac80211] [ 303.745424] ieee80211_set_disassoc+0x108/0x5ec [mac80211] [ 303.745569] ieee80211_mgd_deauth+0x720/0x7d4 [mac80211] [ 303.745706] ieee80211_deauth+0x24/0x30 [mac80211] [ 303.745853] cfg80211_mlme_deauth+0x250/0x3bc [cfg80211] [ 303.745979] cfg80211_mlme_down+0x90/0xd0 [cfg80211] [ 303.746103] cfg80211_disconnect+0x340/0x3a0 [cfg80211] [ 303.746219] __cfg80211_leave+0xe4/0x17c [cfg80211] [ 303.746335] cfg80211_leave+0x38/0x50 [cfg80211] [ 303.746452] wiphy_suspend+0x84/0x5bc [cfg80211] [ 303.746467] dpm_run_callback+0x170/0x304 [ 303.746477] __device_suspend+0x2dc/0x3e8 [ 303.746487] async_suspend+0x2c/0xb0 [ 303.746498] async_run_entry_fn+0x48/0xf8 [ 303.746510] process_one_work+0x304/0x604 [ 303.746521] worker_thread+0x248/0x3f4 [ 303.746530] kthread+0x120/0x130 [ 303.746542] ret_from_fork+0x10/0x18 one sample's debugging log: it wait 3190 ms(5000 - 1810). 1st ath10k_flush, it has 120 packets in tx queue of ath10k: <...>-1513 [000] .... 25374.786005: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:1, pending:120-0 <...>-1513 [000] ...1 25374.788375: ath10k_log_warn: ath10k_sdio mmc1:0001:1 ath10k_htt_tx_mgmt_inc_pending htt->num_pending_mgmt_tx:0 <...>-1500 [001] .... 25374.790143: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121 2st ath10k_flush, it has 121 packets in tx queue of ath10k: <...>-1513 [000] .... 25374.790571: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:0, pending:121-0 <...>-1513 [000] .... 25374.791990: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete state:1 pending:121-0 <...>-1508 [001] .... 25374.792696: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:46 <...>-1508 [001] .... 25374.792700: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:46 <...>-1508 [001] .... 25374.792729: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121 <...>-1508 [001] .... 25374.792937: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:88, count:32, len:49792 <...>-1508 [001] .... 25374.793031: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:75, count:14, len:21784 kworker/u16:0-25773 [003] .... 25374.793701: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:46 <...>-1881 [000] .... 25375.073178: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:24 <...>-1881 [000] .... 25375.073182: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:24 <...>-1881 [000] .... 25375.073429: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:75 <...>-1879 [001] .... 25375.074090: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:24 <...>-1881 [000] .... 25375.074123: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:51, count:24, len:37344 <...>-1879 [001] .... 25375.270126: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:26 <...>-1879 [001] .... 25375.270130: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:26 <...>-1488 [000] .... 25375.270174: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:51 <...>-1488 [000] .... 25375.270529: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:25, count:26, len:40456 <...>-1879 [001] .... 25375.270693: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:26 <...>-1488 [001] .... 25377.775885: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:12 <...>-1488 [001] .... 25377.775890: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:12 <...>-1488 [001] .... 25377.775933: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:25 <...>-1488 [001] .... 25377.776059: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:13, count:12, len:18672 <...>-1879 [001] .... 25377.776100: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:12 <...>-1488 [001] .... 25377.878079: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:15 <...>-1488 [001] .... 25377.878087: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:15 <...>-1879 [000] .... 25377.878323: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:13 <...>-1879 [000] .... 25377.878487: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:0, count:13, len:20228 <...>-1879 [000] .... 25377.878497: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:13 <...>-1488 [001] .... 25377.919927: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:11 <...>-1488 [001] .... 25377.919932: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:13 <...>-1488 [001] .... 25377.919976: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:0 <...>-1881 [000] .... 25377.982645: ath10k_log_warn: ath10k_sdio mmc1:0001:1 HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION status:0 <...>-1513 [001] .... 25377.982973: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete time_left:1810, pending:0-0 Flush all pending TX packets for the 1st ath10k_flush reduced the wait time of the 2nd ath10k_flush and then suspend take short time. This Patch only effect SDIO chips. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042. Signed-off-by: Wen Gong <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f6766ff ] We need to check mddev->del_work before flush workqueu since the purpose of flush is to ensure the previous md is disappeared. Otherwise the similar deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the bdev->bd_mutex before flush workqueue. kernel: [ 154.522645] ====================================================== kernel: [ 154.522647] WARNING: possible circular locking dependency detected kernel: [ 154.522650] 5.6.0-rc7-lp151.27-default STMicroelectronics#25 Tainted: G O kernel: [ 154.522651] ------------------------------------------------------ kernel: [ 154.522653] mdadm/2482 is trying to acquire lock: kernel: [ 154.522655] ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0 kernel: [ 154.522673] kernel: [ 154.522673] but task is already holding lock: kernel: [ 154.522675] ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522691] kernel: [ 154.522691] which lock already depends on the new lock. kernel: [ 154.522691] kernel: [ 154.522694] kernel: [ 154.522694] the existing dependency chain (in reverse order) is: kernel: [ 154.522696] kernel: [ 154.522696] -> STMicroelectronics#4 (&bdev->bd_mutex){+.+.}: kernel: [ 154.522704] __mutex_lock+0x87/0x950 kernel: [ 154.522706] __blkdev_get+0x79/0x590 kernel: [ 154.522708] blkdev_get+0x65/0x140 kernel: [ 154.522709] blkdev_get_by_dev+0x2f/0x40 kernel: [ 154.522716] lock_rdev+0x3d/0x90 [md_mod] kernel: [ 154.522719] md_import_device+0xd6/0x1b0 [md_mod] kernel: [ 154.522723] new_dev_store+0x15e/0x210 [md_mod] kernel: [ 154.522728] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522732] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522735] vfs_write+0xad/0x1a0 kernel: [ 154.522737] ksys_write+0xa4/0xe0 kernel: [ 154.522745] do_syscall_64+0x64/0x2b0 kernel: [ 154.522748] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522749] kernel: [ 154.522749] -> STMicroelectronics#3 (&mddev->reconfig_mutex){+.+.}: kernel: [ 154.522752] __mutex_lock+0x87/0x950 kernel: [ 154.522756] new_dev_store+0xc9/0x210 [md_mod] kernel: [ 154.522759] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522761] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522763] vfs_write+0xad/0x1a0 kernel: [ 154.522765] ksys_write+0xa4/0xe0 kernel: [ 154.522767] do_syscall_64+0x64/0x2b0 kernel: [ 154.522769] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522770] kernel: [ 154.522770] -> STMicroelectronics#2 (kn->count#253){++++}: kernel: [ 154.522775] __kernfs_remove+0x253/0x2c0 kernel: [ 154.522778] kernfs_remove+0x1f/0x30 kernel: [ 154.522780] kobject_del+0x28/0x60 kernel: [ 154.522783] mddev_delayed_delete+0x24/0x30 [md_mod] kernel: [ 154.522786] process_one_work+0x2a7/0x5f0 kernel: [ 154.522788] worker_thread+0x2d/0x3d0 kernel: [ 154.522793] kthread+0x117/0x130 kernel: [ 154.522795] ret_from_fork+0x3a/0x50 kernel: [ 154.522796] kernel: [ 154.522796] -> STMicroelectronics#1 ((work_completion)(&mddev->del_work)){+.+.}: kernel: [ 154.522800] process_one_work+0x27e/0x5f0 kernel: [ 154.522802] worker_thread+0x2d/0x3d0 kernel: [ 154.522804] kthread+0x117/0x130 kernel: [ 154.522806] ret_from_fork+0x3a/0x50 kernel: [ 154.522807] kernel: [ 154.522807] -> #0 ((wq_completion)md_misc){+.+.}: kernel: [ 154.522813] __lock_acquire+0x1392/0x1690 kernel: [ 154.522816] lock_acquire+0xb4/0x1a0 kernel: [ 154.522818] flush_workqueue+0xab/0x4b0 kernel: [ 154.522821] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522823] __blkdev_get+0xea/0x590 kernel: [ 154.522825] blkdev_get+0x65/0x140 kernel: [ 154.522828] do_dentry_open+0x1d1/0x380 kernel: [ 154.522831] path_openat+0x567/0xcc0 kernel: [ 154.522834] do_filp_open+0x9b/0x110 kernel: [ 154.522836] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522838] do_sys_open+0x57/0x80 kernel: [ 154.522840] do_syscall_64+0x64/0x2b0 kernel: [ 154.522842] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522844] kernel: [ 154.522844] other info that might help us debug this: kernel: [ 154.522844] kernel: [ 154.522846] Chain exists of: kernel: [ 154.522846] (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex kernel: [ 154.522846] kernel: [ 154.522850] Possible unsafe locking scenario: kernel: [ 154.522850] kernel: [ 154.522852] CPU0 CPU1 kernel: [ 154.522853] ---- ---- kernel: [ 154.522854] lock(&bdev->bd_mutex); kernel: [ 154.522856] lock(&mddev->reconfig_mutex); kernel: [ 154.522858] lock(&bdev->bd_mutex); kernel: [ 154.522860] lock((wq_completion)md_misc); kernel: [ 154.522861] kernel: [ 154.522861] *** DEADLOCK *** kernel: [ 154.522861] kernel: [ 154.522864] 1 lock held by mdadm/2482: kernel: [ 154.522865] #0: ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522868] kernel: [ 154.522868] stack backtrace: kernel: [ 154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G O 5.6.0-rc7-lp151.27-default STMicroelectronics#25 kernel: [ 154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 kernel: [ 154.522878] Call Trace: kernel: [ 154.522881] dump_stack+0x8f/0xcb kernel: [ 154.522884] check_noncircular+0x194/0x1b0 kernel: [ 154.522888] ? __lock_acquire+0x1392/0x1690 kernel: [ 154.522890] __lock_acquire+0x1392/0x1690 kernel: [ 154.522893] lock_acquire+0xb4/0x1a0 kernel: [ 154.522895] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522898] flush_workqueue+0xab/0x4b0 kernel: [ 154.522900] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522905] ? md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522908] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522910] __blkdev_get+0xea/0x590 kernel: [ 154.522912] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522914] blkdev_get+0x65/0x140 kernel: [ 154.522916] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522918] do_dentry_open+0x1d1/0x380 kernel: [ 154.522921] path_openat+0x567/0xcc0 kernel: [ 154.522923] ? __lock_acquire+0x380/0x1690 kernel: [ 154.522926] do_filp_open+0x9b/0x110 kernel: [ 154.522929] ? __alloc_fd+0xe5/0x1f0 kernel: [ 154.522935] ? kmem_cache_alloc+0x28c/0x630 kernel: [ 154.522939] ? do_sys_openat2+0x201/0x2a0 kernel: [ 154.522941] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522944] do_sys_open+0x57/0x80 kernel: [ 154.522946] do_syscall_64+0x64/0x2b0 kernel: [ 154.522948] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522951] RIP: 0033:0x7f98d279d9ae And md_alloc also flushed the same workqueue, but the thing is different here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and the flush is necessary to avoid race condition, so leave it as it is. Signed-off-by: Guoqing Jiang <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 54505a1 upstream. The commits cd0e00c and 92d7223 broke boot on the Alpha Avanti platform. The patches move memory barriers after a write before the write. The result is that if there's iowrite followed by ioread, there is no barrier between them. The Alpha architecture allows reordering of the accesses to the I/O space, and the missing barrier between write and read causes hang with serial port and real time clock. This patch makes barriers confiorm to the specification. 1. We add mb() before readX_relaxed and writeX_relaxed - memory-barriers.txt claims that these functions must be ordered w.r.t. each other. Alpha doesn't order them, so we need an explicit barrier. 2. We add mb() before reads from the I/O space - so that if there's a write followed by a read, there should be a barrier between them. Signed-off-by: Mikulas Patocka <[email protected]> Fixes: cd0e00c ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering") Fixes: 92d7223 ("alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering STMicroelectronics#2") Cc: [email protected] # v4.17+ Acked-by: Ivan Kokshaysky <[email protected]> Reviewed-by: Maciej W. Rozycki <[email protected]> Signed-off-by: Matt Turner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit ab8b65b ] It is unsafe to traverse kvm->arch.spapr_tce_tables and stt->iommu_tables without the RCU read lock held. Also, add cond_resched_rcu() in places with the RCU read lock held that could take a while to finish. arch/powerpc/kvm/book3s_64_vio.c:76 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by qemu-kvm/4265. stack backtrace: CPU: 96 PID: 4265 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-20200508+ STMicroelectronics#2 Call Trace: [c000201a8690f720] [c000000000715948] dump_stack+0xfc/0x174 (unreliable) [c000201a8690f770] [c0000000001d9470] lockdep_rcu_suspicious+0x140/0x164 [c000201a8690f7f0] [c008000010b9fb48] kvm_spapr_tce_release_iommu_group+0x1f0/0x220 [kvm] [c000201a8690f870] [c008000010b8462c] kvm_spapr_tce_release_vfio_group+0x54/0xb0 [kvm] [c000201a8690f8a0] [c008000010b84710] kvm_vfio_destroy+0x88/0x140 [kvm] [c000201a8690f8f0] [c008000010b7d488] kvm_put_kvm+0x370/0x600 [kvm] [c000201a8690f990] [c008000010b7e3c0] kvm_vm_release+0x38/0x60 [kvm] [c000201a8690f9c0] [c0000000005223f4] __fput+0x124/0x330 [c000201a8690fa20] [c000000000151cd8] task_work_run+0xb8/0x130 [c000201a8690fa70] [c0000000001197e8] do_exit+0x4e8/0xfa0 [c000201a8690fb70] [c00000000011a374] do_group_exit+0x64/0xd0 [c000201a8690fbb0] [c000000000132c90] get_signal+0x1f0/0x1200 [c000201a8690fcc0] [c000000000020690] do_notify_resume+0x130/0x3c0 [c000201a8690fda0] [c000000000038d64] syscall_exit_prepare+0x1a4/0x280 [c000201a8690fe20] [c00000000000c8f8] system_call_common+0xf8/0x278 ==== arch/powerpc/kvm/book3s_64_vio.c:368 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by qemu-kvm/4264: #0: c000201ae2d000d8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm] STMicroelectronics#1: c000200c9ed0c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm] ==== arch/powerpc/kvm/book3s_64_vio.c:108 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by qemu-kvm/4257: #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm] ==== arch/powerpc/kvm/book3s_64_vio.c:146 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by qemu-kvm/4257: #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm] Signed-off-by: Qian Cai <[email protected]> Signed-off-by: Paul Mackerras <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 027690c ] I made every global per-network-namespace instead. But perhaps doing that to this slab was a step too far. The kmem_cache_create call in our net init method also seems to be responsible for this lockdep warning: [ 45.163710] Unable to find swap-space signature [ 45.375718] trinity-c1 (855): attempted to duplicate a private mapping with mremap. This is not supported. [ 46.055744] futex_wake_op: trinity-c1 tries to shift op by -209; fix this program [ 51.011723] [ 51.013378] ====================================================== [ 51.013875] WARNING: possible circular locking dependency detected [ 51.014378] 5.2.0-rc2 STMicroelectronics#1 Not tainted [ 51.014672] ------------------------------------------------------ [ 51.015182] trinity-c2/886 is trying to acquire lock: [ 51.015593] 000000005405f099 (slab_mutex){+.+.}, at: slab_attr_store+0xa2/0x130 [ 51.016190] [ 51.016190] but task is already holding lock: [ 51.016652] 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 [ 51.017266] [ 51.017266] which lock already depends on the new lock. [ 51.017266] [ 51.017909] [ 51.017909] the existing dependency chain (in reverse order) is: [ 51.018497] [ 51.018497] -> STMicroelectronics#1 (kn->count#43){++++}: [ 51.018956] __lock_acquire+0x7cf/0x1a20 [ 51.019317] lock_acquire+0x17d/0x390 [ 51.019658] __kernfs_remove+0x892/0xae0 [ 51.020020] kernfs_remove_by_name_ns+0x78/0x110 [ 51.020435] sysfs_remove_link+0x55/0xb0 [ 51.020832] sysfs_slab_add+0xc1/0x3e0 [ 51.021332] __kmem_cache_create+0x155/0x200 [ 51.021720] create_cache+0xf5/0x320 [ 51.022054] kmem_cache_create_usercopy+0x179/0x320 [ 51.022486] kmem_cache_create+0x1a/0x30 [ 51.022867] nfsd_reply_cache_init+0x278/0x560 [ 51.023266] nfsd_init_net+0x20f/0x5e0 [ 51.023623] ops_init+0xcb/0x4b0 [ 51.023928] setup_net+0x2fe/0x670 [ 51.024315] copy_net_ns+0x30a/0x3f0 [ 51.024653] create_new_namespaces+0x3c5/0x820 [ 51.025257] unshare_nsproxy_namespaces+0xd1/0x240 [ 51.025881] ksys_unshare+0x506/0x9c0 [ 51.026381] __x64_sys_unshare+0x3a/0x50 [ 51.026937] do_syscall_64+0x110/0x10b0 [ 51.027509] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.028175] [ 51.028175] -> #0 (slab_mutex){+.+.}: [ 51.028817] validate_chain+0x1c51/0x2cc0 [ 51.029422] __lock_acquire+0x7cf/0x1a20 [ 51.029947] lock_acquire+0x17d/0x390 [ 51.030438] __mutex_lock+0x100/0xfa0 [ 51.030995] mutex_lock_nested+0x27/0x30 [ 51.031516] slab_attr_store+0xa2/0x130 [ 51.032020] sysfs_kf_write+0x11d/0x180 [ 51.032529] kernfs_fop_write+0x32a/0x500 [ 51.033056] do_loop_readv_writev+0x21d/0x310 [ 51.033627] do_iter_write+0x2e5/0x380 [ 51.034148] vfs_writev+0x170/0x310 [ 51.034616] do_pwritev+0x13e/0x160 [ 51.035100] __x64_sys_pwritev+0xa3/0x110 [ 51.035633] do_syscall_64+0x110/0x10b0 [ 51.036200] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 51.036924] [ 51.036924] other info that might help us debug this: [ 51.036924] [ 51.037876] Possible unsafe locking scenario: [ 51.037876] [ 51.038556] CPU0 CPU1 [ 51.039130] ---- ---- [ 51.039676] lock(kn->count#43); [ 51.040084] lock(slab_mutex); [ 51.040597] lock(kn->count#43); [ 51.041062] lock(slab_mutex); [ 51.041320] [ 51.041320] *** DEADLOCK *** [ 51.041320] [ 51.041793] 3 locks held by trinity-c2/886: [ 51.042128] #0: 000000001f55e152 (sb_writers#5){.+.+}, at: vfs_writev+0x2b9/0x310 [ 51.042739] STMicroelectronics#1: 00000000c7d6c034 (&of->mutex){+.+.}, at: kernfs_fop_write+0x25b/0x500 [ 51.043400] STMicroelectronics#2: 00000000ac662005 (kn->count#43){++++}, at: kernfs_fop_write+0x286/0x500 Reported-by: kernel test robot <[email protected]> Fixes: 3ba7583 "drc containerization" Signed-off-by: J. Bruce Fields <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 2d3a8e2 ] In blkdev_get() we call __blkdev_get() to do some internal jobs and if there is some errors in __blkdev_get(), the bdput() is called which means we have released the refcount of the bdev (actually the refcount of the bdev inode). This means we cannot access bdev after that point. But acctually bdev is still accessed in blkdev_get() after calling __blkdev_get(). This results in use-after-free if the refcount is the last one we released in __blkdev_get(). Let's take a look at the following scenerio: CPU0 CPU1 CPU2 blkdev_open blkdev_open Remove disk bd_acquire blkdev_get __blkdev_get del_gendisk bdev_unhash_inode bd_acquire bdev_get_gendisk bd_forget failed because of unhashed bdput bdput (the last one) bdev_evict_inode access bdev => use after free [ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0 [ 459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132 [ 459.352347] [ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 STMicroelectronics#2 [ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 459.354947] Call Trace: [ 459.355337] dump_stack+0x111/0x19e [ 459.355879] ? __lock_acquire+0x24c1/0x31b0 [ 459.356523] print_address_description+0x60/0x223 [ 459.357248] ? __lock_acquire+0x24c1/0x31b0 [ 459.357887] kasan_report.cold+0xae/0x2d8 [ 459.358503] __lock_acquire+0x24c1/0x31b0 [ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580 [ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.361123] ? finish_task_switch+0x125/0x600 [ 459.361812] ? finish_task_switch+0xee/0x600 [ 459.362471] ? mark_held_locks+0xf0/0xf0 [ 459.363108] ? __schedule+0x96f/0x21d0 [ 459.363716] lock_acquire+0x111/0x320 [ 459.364285] ? blkdev_get+0xce/0xbe0 [ 459.364846] ? blkdev_get+0xce/0xbe0 [ 459.365390] __mutex_lock+0xf9/0x12a0 [ 459.365948] ? blkdev_get+0xce/0xbe0 [ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0 [ 459.367130] ? blkdev_get+0xce/0xbe0 [ 459.367678] ? destroy_inode+0xbc/0x110 [ 459.368261] ? mutex_trylock+0x1a0/0x1a0 [ 459.368867] ? __blkdev_get+0x3e6/0x1280 [ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0 [ 459.370114] ? blkdev_get+0xce/0xbe0 [ 459.370656] blkdev_get+0xce/0xbe0 [ 459.371178] ? find_held_lock+0x2c/0x110 [ 459.371774] ? __blkdev_get+0x1280/0x1280 [ 459.372383] ? lock_downgrade+0x680/0x680 [ 459.373002] ? lock_acquire+0x111/0x320 [ 459.373587] ? bd_acquire+0x21/0x2c0 [ 459.374134] ? do_raw_spin_unlock+0x4f/0x250 [ 459.374780] blkdev_open+0x202/0x290 [ 459.375325] do_dentry_open+0x49e/0x1050 [ 459.375924] ? blkdev_get_by_dev+0x70/0x70 [ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0 [ 459.377192] ? inode_permission+0xbe/0x3a0 [ 459.377818] path_openat+0x148c/0x3f50 [ 459.378392] ? kmem_cache_alloc+0xd5/0x280 [ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.379802] ? path_lookupat.isra.0+0x900/0x900 [ 459.380489] ? __lock_is_held+0xad/0x140 [ 459.381093] do_filp_open+0x1a1/0x280 [ 459.381654] ? may_open_dev+0xf0/0xf0 [ 459.382214] ? find_held_lock+0x2c/0x110 [ 459.382816] ? lock_downgrade+0x680/0x680 [ 459.383425] ? __lock_is_held+0xad/0x140 [ 459.384024] ? do_raw_spin_unlock+0x4f/0x250 [ 459.384668] ? _raw_spin_unlock+0x1f/0x30 [ 459.385280] ? __alloc_fd+0x448/0x560 [ 459.385841] do_sys_open+0x3c3/0x500 [ 459.386386] ? filp_open+0x70/0x70 [ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0 [ 459.388342] ? do_syscall_64+0x1a/0x520 [ 459.388930] do_syscall_64+0xc3/0x520 [ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.390248] RIP: 0033:0x416211 [ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d 01 [ 459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002 [ 459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211 [ 459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00 [ 459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a [ 459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff [ 459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c [ 459.400168] [ 459.400430] Allocated by task 20132: [ 459.401038] kasan_kmalloc+0xbf/0xe0 [ 459.401652] kmem_cache_alloc+0xd5/0x280 [ 459.402330] bdev_alloc_inode+0x18/0x40 [ 459.402970] alloc_inode+0x5f/0x180 [ 459.403510] iget5_locked+0x57/0xd0 [ 459.404095] bdget+0x94/0x4e0 [ 459.404607] bd_acquire+0xfa/0x2c0 [ 459.405113] blkdev_open+0x110/0x290 [ 459.405702] do_dentry_open+0x49e/0x1050 [ 459.406340] path_openat+0x148c/0x3f50 [ 459.406926] do_filp_open+0x1a1/0x280 [ 459.407471] do_sys_open+0x3c3/0x500 [ 459.408010] do_syscall_64+0xc3/0x520 [ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.409415] [ 459.409679] Freed by task 1262: [ 459.410212] __kasan_slab_free+0x129/0x170 [ 459.410919] kmem_cache_free+0xb2/0x2a0 [ 459.411564] rcu_process_callbacks+0xbb2/0x2320 [ 459.412318] __do_softirq+0x225/0x8ac Fix this by delaying bdput() to the end of blkdev_get() which means we have finished accessing bdev. Fixes: 77ea887 ("implement in-kernel gendisk events handling") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Jason Yan <[email protected]> Tested-by: Sedat Dilek <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Ming Lei <[email protected]> Cc: Jan Kara <[email protected]> Cc: Dan Carpenter <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit e5a15e1 upstream. The following kernel panic was captured when running nfs server over ocfs2, at that time ocfs2_test_inode_bit() was checking whether one inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its "suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from //global_inode_alloc, but here it wrongly assumed that it was got from per slot inode alloctor which would cause array overflow and trigger kernel panic. BUG: unable to handle kernel paging request at 0000000000001088 IP: [<ffffffff816f6898>] _raw_spin_lock+0x18/0xf0 PGD 1e06ba067 PUD 1e9e7d067 PMD 0 Oops: 0002 [STMicroelectronics#1] SMP CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 STMicroelectronics#2 Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018 RIP: _raw_spin_lock+0x18/0xf0 RSP: e02b:ffff88005ae97908 EFLAGS: 00010206 RAX: ffff88005ae98000 RBX: 0000000000001088 RCX: 0000000000000000 RDX: 0000000000020000 RSI: 0000000000000009 RDI: 0000000000001088 RBP: ffff88005ae97928 R08: 0000000000000000 R09: ffff880212878e00 R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000001088 R13: ffff8800063c0aa8 R14: ffff8800650c27d0 R15: 000000000000ffff FS: 0000000000000000(0000) GS:ffff880218180000(0000) knlGS:ffff880218180000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001088 CR3: 00000002033d0000 CR4: 0000000000042660 Call Trace: igrab+0x1e/0x60 ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2] ocfs2_test_inode_bit+0x328/0xa00 [ocfs2] ocfs2_get_parent+0xba/0x3e0 [ocfs2] reconnect_path+0xb5/0x300 exportfs_decode_fh+0xf6/0x2b0 fh_verify+0x350/0x660 [nfsd] nfsd4_putfh+0x4d/0x60 [nfsd] nfsd4_proc_compound+0x3d3/0x6f0 [nfsd] nfsd_dispatch+0xe0/0x290 [nfsd] svc_process_common+0x412/0x6a0 [sunrpc] svc_process+0x123/0x210 [sunrpc] nfsd+0xff/0x170 [nfsd] kthread+0xcb/0xf0 ret_from_fork+0x61/0x90 Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00 <f0> 0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6 RIP _raw_spin_lock+0x18/0xf0 CR2: 0000000000001088 ---[ end trace 7264463cd1aac8f9 ]--- Kernel panic - not syncing: Fatal exception Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Junxiao Bi <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Joel Becker <[email protected]> Cc: Jun Piao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 00cbce5 ] hfi1 user SDMA request processing has two bugs that can cause data corruption for user SDMA requests that have multiple payload iovecs where an iovec other than the tail iovec does not run up to the page boundary for the buffer pointed to by that iovec.a Here are the specific bugs: 1. user_sdma_txadd() does not use struct user_sdma_iovec->iov.iov_len. Rather, user_sdma_txadd() will add up to PAGE_SIZE bytes from iovec to the packet, even if some of those bytes are past iovec->iov.iov_len and are thus not intended to be in the packet. 2. user_sdma_txadd() and user_sdma_send_pkts() fail to advance to the next iovec in user_sdma_request->iovs when the current iovec is not PAGE_SIZE and does not contain enough data to complete the packet. The transmitted packet will contain the wrong data from the iovec pages. This has not been an issue with SDMA packets from hfi1 Verbs or PSM2 because they only produce iovecs that end short of PAGE_SIZE as the tail iovec of an SDMA request. Fixing these bugs exposes other bugs with the SDMA pin cache (struct mmu_rb_handler) that get in way of supporting user SDMA requests with multiple payload iovecs whose buffers do not end at PAGE_SIZE. So this commit fixes those issues as well. Here are the mmu_rb_handler bugs that non-PAGE_SIZE-end multi-iovec payload user SDMA requests can hit: 1. Overlapping memory ranges in mmu_rb_handler will result in duplicate pinnings. 2. When extending an existing mmu_rb_handler entry (struct mmu_rb_node), the mmu_rb code (1) removes the existing entry under a lock, (2) releases that lock, pins the new pages, (3) then reacquires the lock to insert the extended mmu_rb_node. If someone else comes in and inserts an overlapping entry between (2) and (3), insert in (3) will fail. The failure path code in this case unpins _all_ pages in either the original mmu_rb_node or the new mmu_rb_node that was inserted between (2) and (3). 3. In hfi1_mmu_rb_remove_unless_exact(), mmu_rb_node->refcount is incremented outside of mmu_rb_handler->lock. As a result, mmu_rb_node could be evicted by another thread that gets mmu_rb_handler->lock and checks mmu_rb_node->refcount before mmu_rb_node->refcount is incremented. 4. Related to STMicroelectronics#2 above, SDMA request submission failure path does not check mmu_rb_node->refcount before freeing mmu_rb_node object. If there are other SDMA requests in progress whose iovecs have pointers to the now-freed mmu_rb_node(s), those pointers to the now-freed mmu_rb nodes will be dereferenced when those SDMA requests complete. Fixes: 7be8567 ("IB/hfi1: Don't remove RB entry when not needed.") Fixes: 7724105 ("IB/hfi1: add driver files") Signed-off-by: Brendan Cunningham <[email protected]> Signed-off-by: Patrick Kelsey <[email protected]> Signed-off-by: Dennis Dalessandro <[email protected]> Link: https://lore.kernel.org/r/168088636445.3027109.10054635277810177889.stgit@252.162.96.66.static.eigbox.net Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 91d6a46 ] gpi_ch_init() doesn't lock the ctrl_lock mutex, so there is no need to unlock it too. Instead the mutex is handled by the function gpi_alloc_chan_resources(), which properly locks and unlocks the mutex. ===================================== WARNING: bad unlock balance detected! 6.3.0-rc5-00253-g99792582ded1-dirty STMicroelectronics#15 Not tainted ------------------------------------- kworker/u16:0/9 is trying to release lock (&gpii->ctrl_lock) at: [<ffffb99d04e1284c>] gpi_alloc_chan_resources+0x108/0x5bc but there are no more locks to release! other info that might help us debug this: 6 locks held by kworker/u16:0/9: #0: ffff575740010938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x220/0x594 STMicroelectronics#1: ffff80000809bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x220/0x594 STMicroelectronics#2: ffff575740f2a0f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188 STMicroelectronics#3: ffff57574b5570f8 (&dev->mutex){....}-{3:3}, at: __device_attach+0x38/0x188 STMicroelectronics#4: ffffb99d06a2f180 (of_dma_lock){+.+.}-{3:3}, at: of_dma_request_slave_channel+0x138/0x280 STMicroelectronics#5: ffffb99d06a2ee20 (dma_list_mutex){+.+.}-{3:3}, at: dma_get_slave_channel+0x28/0x10c stack backtrace: CPU: 7 PID: 9 Comm: kworker/u16:0 Not tainted 6.3.0-rc5-00253-g99792582ded1-dirty STMicroelectronics#15 Hardware name: Google Pixel 3 (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0xa0/0xfc show_stack+0x18/0x24 dump_stack_lvl+0x60/0xac dump_stack+0x18/0x24 print_unlock_imbalance_bug+0x130/0x148 lock_release+0x270/0x300 __mutex_unlock_slowpath+0x48/0x2cc mutex_unlock+0x20/0x2c gpi_alloc_chan_resources+0x108/0x5bc dma_chan_get+0x84/0x188 dma_get_slave_channel+0x5c/0x10c gpi_of_dma_xlate+0x110/0x1a0 of_dma_request_slave_channel+0x174/0x280 dma_request_chan+0x3c/0x2d4 geni_i2c_probe+0x544/0x63c platform_probe+0x68/0xc4 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 device_add+0x60c/0x7d8 of_device_add+0x44/0x60 of_platform_device_create_pdata+0x90/0x124 of_platform_bus_create+0x15c/0x3c8 of_platform_populate+0x58/0xf8 devm_of_platform_populate+0x58/0xbc geni_se_probe+0xf0/0x164 platform_probe+0x68/0xc4 really_probe+0x148/0x2ac __driver_probe_device+0x78/0xe0 driver_probe_device+0x3c/0x160 __device_attach_driver+0xb8/0x138 bus_for_each_drv+0x84/0xe0 __device_attach+0x9c/0x188 device_initial_probe+0x14/0x20 bus_probe_device+0xac/0xb0 deferred_probe_work_func+0x8c/0xc8 process_one_work+0x2bc/0x594 worker_thread+0x228/0x438 kthread+0x108/0x10c ret_from_fork+0x10/0x20 Fixes: 5d0c353 ("dmaengine: qcom: Add GPI dma driver") Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 45121ad ] The PSP IRQ is edge-triggered (MSI or MSI-X) in all cases supported by the psp module so clear the interrupt status register early in the handler to prevent missed interrupts. sev_irq_handler() calls wake_up() on a wait queue, which can result in a new command being submitted from a different CPU. This then races with the clearing of isr and can result in missed interrupts. A missed interrupt results in a command waiting until it times out, which results in the psp being declared dead. This is unlikely on bare metal, but has been observed when running virtualized. In the cases where this is observed, sev->cmdresp_reg has PSP_CMDRESP_RESP set which indicates that the command was processed correctly but no interrupt was asserted. The full sequence of events looks like this: CPU 1: submits SEV cmd STMicroelectronics#1 CPU 1: calls wait_event_timeout() CPU 0: enters psp_irq_handler() CPU 0: calls sev_handler()->wake_up() CPU 1: wakes up; finishes processing cmd STMicroelectronics#1 CPU 1: submits SEV cmd STMicroelectronics#2 CPU 1: calls wait_event_timeout() PSP: finishes processing cmd STMicroelectronics#2; interrupt status is still set; no interrupt CPU 0: clears intsts CPU 0: exits psp_irq_handler() CPU 1: wait_event_timeout() times out; psp_dead=true Fixes: 200664d ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support") Cc: [email protected] Signed-off-by: Jeremi Piotrowski <[email protected]> Acked-by: Tom Lendacky <[email protected]> Signed-off-by: Herbert Xu <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit dfd9248 ] KCSAN found a data race in sock_recv_cmsgs() where the read access to sk->sk_stamp needs READ_ONCE(). BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0: sock_write_timestamp include/net/sock.h:2670 [inline] sock_recv_cmsgs include/net/sock.h:2722 [inline] packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1: sock_recv_cmsgs include/net/sock.h:2721 [inline] packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0xffffffffc4653600 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 STMicroelectronics#2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 6c7c98b ("sock: avoid dirtying sk_stamp, if possible") Reported-by: syzbot <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 679ed00 ] KCSAN found a data race of sk->sk_receive_queue->qlen where recvmsg() updates qlen under the queue lock and sendmsg() checks qlen under unix_state_sock(), not the queue lock, so the reader side needs READ_ONCE(). BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_wait_for_peer write (marked) to 0xffff888019fe7c68 of 4 bytes by task 49792 on cpu 0: __skb_unlink include/linux/skbuff.h:2347 [inline] __skb_try_recv_from_queue+0x3de/0x470 net/core/datagram.c:197 __skb_try_recv_datagram+0xf7/0x390 net/core/datagram.c:263 __unix_dgram_recvmsg+0x109/0x8a0 net/unix/af_unix.c:2452 unix_dgram_recvmsg+0x94/0xa0 net/unix/af_unix.c:2549 sock_recvmsg_nosec net/socket.c:1019 [inline] ____sys_recvmsg+0x3a3/0x3b0 net/socket.c:2720 ___sys_recvmsg+0xc8/0x150 net/socket.c:2764 do_recvmmsg+0x182/0x560 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x153/0x170 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff888019fe7c68 of 4 bytes by task 49793 on cpu 1: skb_queue_len include/linux/skbuff.h:2127 [inline] unix_recvq_full net/unix/af_unix.c:229 [inline] unix_wait_for_peer+0x154/0x1a0 net/unix/af_unix.c:1445 unix_dgram_sendmsg+0x13bc/0x14b0 net/unix/af_unix.c:2048 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x148/0x160 net/socket.c:747 ____sys_sendmsg+0x20e/0x620 net/socket.c:2503 ___sys_sendmsg+0xc6/0x140 net/socket.c:2557 __sys_sendmmsg+0x11d/0x370 net/socket.c:2643 __do_sys_sendmmsg net/socket.c:2672 [inline] __se_sys_sendmmsg net/socket.c:2669 [inline] __x64_sys_sendmmsg+0x58/0x70 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x0000000b -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 49793 Comm: syz-executor.0 Not tainted 6.3.0-rc7-02330-gca6270c12e20 STMicroelectronics#2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e1d09c2 ] KCSAN found a data race around sk->sk_shutdown where unix_release_sock() and unix_shutdown() update it under unix_state_lock(), OTOH unix_poll() and unix_dgram_poll() read it locklessly. We need to annotate the writes and reads with WRITE_ONCE() and READ_ONCE(). BUG: KCSAN: data-race in unix_poll / unix_release_sock write to 0xffff88800d0f8aec of 1 bytes by task 264 on cpu 0: unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631 unix_release+0x59/0x80 net/unix/af_unix.c:1042 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1397 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88800d0f8aec of 1 bytes by task 222 on cpu 1: unix_poll+0xa3/0x2a0 net/unix/af_unix.c:3170 sock_poll+0xcf/0x2b0 net/socket.c:1385 vfs_poll include/linux/poll.h:88 [inline] ep_item_poll.isra.0+0x78/0xc0 fs/eventpoll.c:855 ep_send_events fs/eventpoll.c:1694 [inline] ep_poll fs/eventpoll.c:1823 [inline] do_epoll_wait+0x6c4/0xea0 fs/eventpoll.c:2258 __do_sys_epoll_wait fs/eventpoll.c:2270 [inline] __se_sys_epoll_wait fs/eventpoll.c:2265 [inline] __x64_sys_epoll_wait+0xcc/0x190 fs/eventpoll.c:2265 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00 -> 0x03 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 222 Comm: dbus-broker Not tainted 6.3.0-rc7-02330-gca6270c12e20 STMicroelectronics#2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 3c73419 ("af_unix: fix 'poll for write'/ connected DGRAM sockets") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit d2c48b2 ] Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra triggers: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0 preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by cpuhp/0/24: #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 STMicroelectronics#1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 STMicroelectronics#2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130 irq event stamp: 36 hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0 hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248 softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...] Hardware name: WIWYNN Mt.Jade Server [...] Call trace: dump_backtrace+0x114/0x120 show_stack+0x20/0x70 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x228 rt_spin_lock+0x70/0x120 sdei_cpuhp_up+0x3c/0x130 cpuhp_invoke_callback+0x250/0xf08 cpuhp_thread_fun+0x120/0x248 smpboot_thread_fn+0x280/0x320 kthread+0x130/0x140 ret_from_fork+0x10/0x20 sdei_cpuhp_up() is called in the STARTING hotplug section, which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry instead to execute the cpuhp cb later, with preemption enabled. SDEI originally got its own cpuhp slot to allow interacting with perf. It got superseded by pNMI and this early slot is not relevant anymore. [1] Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the calling CPU. It is checked that preemption is disabled for them. _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'. Preemption is enabled in those threads, but their cpumask is limited to 1 CPU. Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb don't trigger them. Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call which acts on the calling CPU. [1]: https://lore.kernel.org/all/[email protected]/ Suggested-by: James Morse <[email protected]> Signed-off-by: Pierre Gondois <[email protected]> Reviewed-by: James Morse <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 STMicroelectronics#1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f STMicroelectronics#1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f STMicroelectronics#1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f STMicroelectronics#2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d STMicroelectronics#3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d STMicroelectronics#4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 STMicroelectronics#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 STMicroelectronics#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac STMicroelectronics#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 STMicroelectronics#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 STMicroelectronics#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 STMicroelectronics#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 STMicroelectronics#11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac STMicroelectronics#12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d STMicroelectronics#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 597441b upstream. Our CI system caught a lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc7+ #1167 Not tainted ------------------------------------------------------ kswapd0/46 is trying to acquire lock: ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120 but task is already holding lock: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> STMicroelectronics#1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0xa5/0xe0 kmem_cache_alloc+0x31/0x2c0 alloc_extent_state+0x1d/0xd0 __clear_extent_bit+0x2e0/0x4f0 try_release_extent_mapping+0x216/0x280 btrfs_release_folio+0x2e/0x90 invalidate_inode_pages2_range+0x397/0x470 btrfs_cleanup_dirty_bgs+0x9e/0x210 btrfs_cleanup_one_transaction+0x22/0x760 btrfs_commit_transaction+0x3b7/0x13a0 create_subvol+0x59b/0x970 btrfs_mksubvol+0x435/0x4f0 __btrfs_ioctl_snap_create+0x11e/0x1b0 btrfs_ioctl_snap_create_v2+0xbf/0x140 btrfs_ioctl+0xa45/0x28f0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc -> #0 (sb_internal#2){++++}-{0:0}: __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 start_transaction+0x401/0x730 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 kthread+0xf0/0x120 ret_from_fork+0x29/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sb_internal#2); lock(fs_reclaim); lock(sb_internal#2); *** DEADLOCK *** 3 locks held by kswapd0/46: #0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 STMicroelectronics#1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290 STMicroelectronics#2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0 stack backtrace: CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x58/0x90 check_noncircular+0xd6/0x100 ? save_trace+0x3f/0x310 ? add_lock_to_list+0x97/0x120 __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 start_transaction+0x401/0x730 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 ? lock_release+0x134/0x270 ? __pfx_wake_bit_function+0x10/0x10 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 ? __pfx_inode_lru_isolate+0x10/0x10 ? __pfx_inode_lru_isolate+0x10/0x10 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_kswapd+0x10/0x10 kthread+0xf0/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> This happens because when we abort the transaction in the transaction commit path we call invalidate_inode_pages2_range on our block group cache inodes (if we have space cache v1) and any delalloc inodes we may have. The plain invalidate_inode_pages2_range() call passes through GFP_KERNEL, which makes sense in most cases, but not here. Wrap these two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to make sure we don't end up with the fs reclaim dependency under the transaction dependency. CC: [email protected] # 4.14+ Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 691c041 ] Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ STMicroelectronics#1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> STMicroelectronics#1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.621125] tc_setup_cb_add+0xd4/0x200 [ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.622047] fl_change+0xc95/0x18a0 [cls_flower] [ 164.622500] tc_new_tfilter+0x3fc/0xd20 [ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.623324] netlink_rcv_skb+0x54/0x100 [ 164.623727] netlink_unicast+0x190/0x250 [ 164.624138] netlink_sendmsg+0x245/0x4a0 [ 164.624544] sock_sendmsg+0x38/0x60 [ 164.624919] ____sys_sendmsg+0x1d0/0x1e0 [ 164.625340] ___sys_sendmsg+0x80/0xc0 [ 164.625731] __sys_sendmsg+0x51/0x90 [ 164.626117] do_syscall_64+0x3d/0x90 [ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.626995] other info that might help us debug this: [ 164.627725] Possible unsafe locking scenario: [ 164.628268] CPU0 CPU1 [ 164.628683] ---- ---- [ 164.629098] lock(&comp->sem); [ 164.629421] lock(&esw->offloads.encap_tbl_lock); [ 164.630066] lock(&comp->sem); [ 164.630555] lock(&esw->offloads.encap_tbl_lock); [ 164.630993] *** DEADLOCK *** [ 164.631575] 3 locks held by handler1/3456: [ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 164.632703] STMicroelectronics#1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 164.633552] STMicroelectronics#2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.634435] stack backtrace: [ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ STMicroelectronics#1 [ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 164.636340] Call Trace: [ 164.636616] <TASK> [ 164.636863] dump_stack_lvl+0x47/0x70 [ 164.637217] check_noncircular+0xfe/0x110 [ 164.637601] __lock_acquire+0x159e/0x26e0 [ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core] [ 164.638472] lock_acquire+0xc2/0x2a0 [ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.639339] ? lock_is_held_type+0x98/0x110 [ 164.639728] __mutex_lock+0x92/0xcd0 [ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.640576] ? __lock_acquire+0x382/0x26e0 [ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.642454] ? lock_release+0xbf/0x240 [ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.644862] ? lock_acquire+0xc2/0x2a0 [ 164.645219] tc_setup_cb_add+0xd4/0x200 [ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.646067] fl_change+0xc95/0x18a0 [cls_flower] [ 164.646488] tc_new_tfilter+0x3fc/0xd20 [ 164.646861] ? tc_del_tfilter+0x810/0x810 [ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.647621] ? rtnl_setlink+0x160/0x160 [ 164.647982] netlink_rcv_skb+0x54/0x100 [ 164.648348] netlink_unicast+0x190/0x250 [ 164.648722] netlink_sendmsg+0x245/0x4a0 [ 164.649090] sock_sendmsg+0x38/0x60 [ 164.649434] ____sys_sendmsg+0x1d0/0x1e0 [ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0 [ 164.650213] ___sys_sendmsg+0x80/0xc0 [ 164.650563] ? lock_acquire+0xc2/0x2a0 [ 164.650926] ? lock_acquire+0xc2/0x2a0 [ 164.651286] ? __fget_files+0x5/0x190 [ 164.651644] ? find_held_lock+0x2b/0x80 [ 164.652006] ? __fget_files+0xb9/0x190 [ 164.652365] ? lock_release+0xbf/0x240 [ 164.652723] ? __fget_files+0xd3/0x190 [ 164.653079] __sys_sendmsg+0x51/0x90 [ 164.653435] do_syscall_64+0x3d/0x90 [ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.654229] RIP: 0033:0x7f378054f8bd [ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48 [ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd [ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014 [ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c [ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0 [ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540 Fixes: f9d196b ("net/mlx5e: Use correct eswitch for stack devices with lag") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Shay Drory <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.12, take STMicroelectronics#2 - Fix the guest view of the ID registers, making the relevant fields writable from userspace (affecting ID_AA64DFR0_EL1 and ID_AA64PFR1_EL1) - Correcly expose S1PIE to guests, fixing a regression introduced in 6.12-rc1 with the S1POE support - Fix the recycling of stage-2 shadow MMUs by tracking the context (are we allowed to block or not) as well as the recycling state - Address a couple of issues with the vgic when userspace misconfigures the emulation, resulting in various splats. Headaches courtesy of our Syzkaller friends

Currently, when configuring TMU (Time Management Unit) mode of a given router, we take into account only its own TMU requirements ignoring other routers in the domain. This is problematic if the router we are configuring has lower TMU requirements than what is already configured in the domain. In the scenario below, we have a host router with two USB4 ports: A and B. Port A connected to device router STMicroelectronics#1 (which supports CL states) and existing DisplayPort tunnel, thus, the TMU mode is HiFi uni-directional. 1. Initial topology [Host] A/ / [Device STMicroelectronics#1] / Monitor 2. Plug in device STMicroelectronics#2 (that supports CL states) to downstream port B of the host router [Host] A/ B\ / \ [Device STMicroelectronics#1] [Device STMicroelectronics#2] / Monitor The TMU mode on port B and port A will be configured to LowRes which is not what we want and will cause monitor to start flickering. To address this we first scan the domain and search for any router configured to HiFi uni-directional mode, and if found, configure TMU mode of the given router to HiFi uni-directional as well. Cc: [email protected] Signed-off-by: Gil Fine <[email protected]> Signed-off-by: Mika Westerberg <[email protected]>

Fix possible use-after-free in 'taprio_dump()' by adding RCU read-side critical section there. Never seen on x86 but found on a KASAN-enabled arm64 system when investigating https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa: [T15862] BUG: KASAN: slab-use-after-free in taprio_dump+0xa0c/0xbb0 [T15862] Read of size 4 at addr ffff0000d4bb88f8 by task repro/15862 [T15862] [T15862] CPU: 0 UID: 0 PID: 15862 Comm: repro Not tainted 6.11.0-rc1-00293-gdefaf1a2113a-dirty STMicroelectronics#2 [T15862] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-20240524-5.fc40 05/24/2024 [T15862] Call trace: [T15862] dump_backtrace+0x20c/0x220 [T15862] show_stack+0x2c/0x40 [T15862] dump_stack_lvl+0xf8/0x174 [T15862] print_report+0x170/0x4d8 [T15862] kasan_report+0xb8/0x1d4 [T15862] __asan_report_load4_noabort+0x20/0x2c [T15862] taprio_dump+0xa0c/0xbb0 [T15862] tc_fill_qdisc+0x540/0x1020 [T15862] qdisc_notify.isra.0+0x330/0x3a0 [T15862] tc_modify_qdisc+0x7b8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Allocated by task 15857: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_alloc_info+0x40/0x60 [T15862] __kasan_kmalloc+0xd4/0xe0 [T15862] __kmalloc_cache_noprof+0x194/0x334 [T15862] taprio_change+0x45c/0x2fe0 [T15862] tc_modify_qdisc+0x6a8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Freed by task 6192: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_free_info+0x4c/0x80 [T15862] poison_slab_object+0x110/0x160 [T15862] __kasan_slab_free+0x3c/0x74 [T15862] kfree+0x134/0x3c0 [T15862] taprio_free_sched_cb+0x18c/0x220 [T15862] rcu_core+0x920/0x1b7c [T15862] rcu_core_si+0x10/0x1c [T15862] handle_softirqs+0x2e8/0xd64 [T15862] __do_softirq+0x14/0x20 Fixes: 18cdd2f ("net/sched: taprio: taprio_dump and taprio_change are protected by rtnl_mutex") Acked-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: Dmitry Antipov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>

Running rcutorture scenario TREE05, the below warning is triggered. [ 32.604594] WARNING: suspicious RCU usage [ 32.605928] 6.11.0-rc5-00040-g4ba4f1afb6a9 #55238 Not tainted [ 32.607812] ----------------------------- [ 32.609140] kernel/events/core.c:13946 RCU-list traversed in non-reader section!! [ 32.611595] other info that might help us debug this: [ 32.614247] rcu_scheduler_active = 2, debug_locks = 1 [ 32.616392] 3 locks held by cpuhp/4/35: [ 32.617687] #0: ffffffffb666a650 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x4e/0x200 [ 32.620563] STMicroelectronics#1: ffffffffb666cd20 (cpuhp_state-down){+.+.}-{0:0}, at: cpuhp_thread_fun+0x4e/0x200 [ 32.623412] STMicroelectronics#2: ffffffffb677c288 (pmus_lock){+.+.}-{3:3}, at: perf_event_exit_cpu_context+0x32/0x2f0 In perf_event_clear_cpumask(), uses list_for_each_entry_rcu() without an obvious RCU read-side critical section. Either pmus_srcu or pmus_lock is good enough to protect the pmus list. In the current context, pmus_lock is already held. The list_for_each_entry_rcu() is not required. Fixes: 4ba4f1a ("perf: Generic hotplug support for a PMU with a scope") Closes: https://lore.kernel.org/lkml/2b66dff8-b827-494b-b151-1ad8d56f13e6@paulmck-laptop/ Closes: https://lore.kernel.org/oe-lkp/[email protected] Reported-by: "Paul E. McKenney" <[email protected]> Reported-by: kernel test robot <[email protected]> Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Tested-by: "Paul E. McKenney" <[email protected]> Link: https://lore.kernel.org/r/[email protected]

Hou Tao says: ==================== Add the missing BPF_LINK_TYPE invocation for sockmap From: Hou Tao <[email protected]> Hi, The tiny patch set fixes the out-of-bound read problem when reading the fdinfo of sock map link fd. And in order to spot such omission early for the newly-added link type in the future, it also checks the validity of the link->type and adds a WARN_ONCE() for missed invocation. Please see individual patches for more details. And comments are always welcome. v3: * patch STMicroelectronics#2: check and warn the validity of link->type instead of adding a static assertion for bpf_link_type_strs array. v2: http://lore.kernel.org/bpf/[email protected] ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Andrii Nakryiko <[email protected]>

generic/077 on x86_32 CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y with highmem, on huge=always tmpfs, issues a warning and then hangs (interruptibly): WARNING: CPU: 5 PID: 3517 at mm/highmem.c:622 kunmap_local_indexed+0x62/0xc9 CPU: 5 UID: 0 PID: 3517 Comm: cp Not tainted 6.12.0-rc4 STMicroelectronics#2 ... copy_page_from_iter_atomic+0xa6/0x5ec generic_perform_write+0xf6/0x1b4 shmem_file_write_iter+0x54/0x67 Fix copy_page_from_iter_atomic() by limiting it in that case (include/linux/skbuff.h skb_frag_must_loop() does similar). But going forward, perhaps CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is too surprising, has outlived its usefulness, and should just be removed? Fixes: 908a1ad ("iov_iter: Handle compound highmem pages in copy_page_from_iter_atomic()") Signed-off-by: Hugh Dickins <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Christoph Hellwig <[email protected]> Cc: [email protected] Signed-off-by: Christian Brauner <[email protected]>

Hou Tao says: ==================== The patch set fixes several issues in bits iterator. Patch STMicroelectronics#1 fixes the kmemleak problem of bits iterator. Patch STMicroelectronics#2~STMicroelectronics#3 fix the overflow problem of nr_bits. Patch STMicroelectronics#4 fixes the potential stack corruption when bits iterator is used on 32-bit host. Patch STMicroelectronics#5 adds more test cases for bits iterator. Please see the individual patches for more details. And comments are always welcome. --- v4: * patch STMicroelectronics#1: add ack from Yafang * patch STMicroelectronics#3: revert code-churn like changes: (1) compute nr_bytes and nr_bits before the check of nr_words. (2) use nr_bits == 64 to check for single u64, preventing build warning on 32-bit hosts. * patch STMicroelectronics#4: use "BITS_PER_LONG == 32" instead of "!defined(CONFIG_64BIT)" v3: https://lore.kernel.org/bpf/[email protected]/T/#t * split the bits-iterator related patches from "Misc fixes for bpf" patch set * patch STMicroelectronics#1: use "!nr_bits || bits >= nr_bits" to stop the iteration * patch STMicroelectronics#2: add a new helper for the overflow problem * patch STMicroelectronics#3: decrease the limitation from 512 to 511 and check whether nr_bytes is too large for bpf memory allocator explicitly * patch STMicroelectronics#5: add two more test cases for bit iterator v2: http://lore.kernel.org/bpf/[email protected] ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>

Petr Machata says: ==================== mlxsw: Fixes In this patchset: - Tx header should be pushed for each packet which is transmitted via Spectrum ASICs. Patch STMicroelectronics#1 adds a missing call to skb_cow_head() to make sure that there is both enough room to push the Tx header and that the SKB header is not cloned and can be modified. - Commit b5b60bb ("mlxsw: pci: Use page pool for Rx buffers allocation") converted mlxsw to use page pool for Rx buffers allocation. Sync for CPU and for device should be done for Rx pages. In patches STMicroelectronics#2 and STMicroelectronics#3, add the missing calls to sync pages for, respectively, CPU and the device. - Patch STMicroelectronics#4 then fixes a bug to IPv6 GRE forwarding offload. Patch STMicroelectronics#5 adds a generic forwarding test that fails with mlxsw ports prior to the fix. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

When we compile and load lib/slub_kunit.c,it will cause a panic. The root cause is that __kmalloc_cache_noprof was directly called instead of kmem_cache_alloc,which resulted in no alloc_tag being allocated.This caused current->alloc_tag to be null,leading to a null pointer dereference in alloc_tag_ref_set. Despite the fact that my colleague Pei Xiao will later fix the code in slub_kunit.c,we still need fix null pointer check logic for ref and tag to avoid panic caused by a null pointer dereference. Here is the log for the panic: [ 74.779373][ T2158] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 74.780130][ T2158] Mem abort info: [ 74.780406][ T2158] ESR = 0x0000000096000004 [ 74.780756][ T2158] EC = 0x25: DABT (current EL), IL = 32 bits [ 74.781225][ T2158] SET = 0, FnV = 0 [ 74.781529][ T2158] EA = 0, S1PTW = 0 [ 74.781836][ T2158] FSC = 0x04: level 0 translation fault [ 74.782288][ T2158] Data abort info: [ 74.782577][ T2158] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 74.783068][ T2158] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 74.783533][ T2158] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 74.784010][ T2158] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000105f34000 [ 74.784586][ T2158] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 [ 74.785293][ T2158] Internal error: Oops: 0000000096000004 [STMicroelectronics#1] SMP [ 74.785805][ T2158] Modules linked in: slub_kunit kunit ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_mangle 4 [ 74.790661][ T2158] CPU: 0 UID: 0 PID: 2158 Comm: kunit_try_catch Kdump: loaded Tainted: G W N 6.12.0-rc3+ STMicroelectronics#2 [ 74.791535][ T2158] Tainted: [W]=WARN, [N]=TEST [ 74.791889][ T2158] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 74.792479][ T2158] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 74.793101][ T2158] pc : alloc_tagging_slab_alloc_hook+0x120/0x270 [ 74.793607][ T2158] lr : alloc_tagging_slab_alloc_hook+0x120/0x270 [ 74.794095][ T2158] sp : ffff800084d33cd0 [ 74.794418][ T2158] x29: ffff800084d33cd0 x28: 0000000000000000 x27: 0000000000000000 [ 74.795095][ T2158] x26: 0000000000000000 x25: 0000000000000012 x24: ffff80007b30e314 [ 74.795822][ T2158] x23: ffff000390ff6f10 x22: 0000000000000000 x21: 0000000000000088 [ 74.796555][ T2158] x20: ffff000390285840 x19: fffffd7fc3ef7830 x18: ffffffffffffffff [ 74.797283][ T2158] x17: ffff8000800e63b4 x16: ffff80007b33afc4 x15: ffff800081654c00 [ 74.798011][ T2158] x14: 0000000000000000 x13: 205d383531325420 x12: 5b5d383734363537 [ 74.798744][ T2158] x11: ffff800084d337e0 x10: 000000000000005d x9 : 00000000ffffffd0 [ 74.799476][ T2158] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008219d188 x6 : c0000000ffff7fff [ 74.800206][ T2158] x5 : ffff0003fdbc9208 x4 : ffff800081edd188 x3 : 0000000000000001 [ 74.800932][ T2158] x2 : 0beaa6dee1ac5a00 x1 : 0beaa6dee1ac5a00 x0 : ffff80037c2cb000 [ 74.801656][ T2158] Call trace: [ 74.801954][ T2158] alloc_tagging_slab_alloc_hook+0x120/0x270 [ 74.802494][ T2158] __kmalloc_cache_noprof+0x148/0x33c [ 74.802976][ T2158] test_kmalloc_redzone_access+0x4c/0x104 [slub_kunit] [ 74.803607][ T2158] kunit_try_run_case+0x70/0x17c [kunit] [ 74.804124][ T2158] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit] [ 74.804768][ T2158] kthread+0x10c/0x118 [ 74.805141][ T2158] ret_from_fork+0x10/0x20 [ 74.805540][ T2158] Code: b9400a80 11000400 b9000a80 97ffd858 (f94012d3) [ 74.806176][ T2158] SMP: stopping secondary CPUs [ 74.808130][ T2158] Starting crashdump kernel... Link: https://lkml.kernel.org/r/[email protected] Fixes: e0a955b ("mm/codetag: add pgalloc_tag_copy()") Signed-off-by: Hao Ge <[email protected]> Acked-by: Suren Baghdasaryan <[email protected]> Suggested-by: Suren Baghdasaryan <[email protected]> Acked-by: Yu Zhao <[email protected]> Cc: Kent Overstreet <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

The scope of the TX skb is wider than just mse102x_tx_frame_spi(), so in case the TX skb room needs to be expanded, we should free the the temporary skb instead of the original skb. Otherwise the original TX skb pointer would be freed again in mse102x_tx_work(), which leads to crashes: Internal error: Oops: 0000000096000004 [STMicroelectronics#2] PREEMPT SMP CPU: 0 PID: 712 Comm: kworker/0:1 Tainted: G D 6.6.23 Hardware name: chargebyte Charge SOM DC-ONE (DT) Workqueue: events mse102x_tx_work [mse102x] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_release_data+0xb8/0x1d8 lr : skb_release_data+0x1ac/0x1d8 sp : ffff8000819a3cc0 x29: ffff8000819a3cc0 x28: ffff0000046daa60 x27: ffff0000057f2dc0 x26: ffff000005386c00 x25: 0000000000000002 x24: 00000000ffffffff x23: 0000000000000000 x22: 0000000000000001 x21: ffff0000057f2e50 x20: 0000000000000006 x19: 0000000000000000 x18: ffff00003fdacfcc x17: e69ad452d0c49def x16: 84a005feff870102 x15: 0000000000000000 x14: 000000000000024a x13: 0000000000000002 x12: 0000000000000000 x11: 0000000000000400 x10: 0000000000000930 x9 : ffff00003fd913e8 x8 : fffffc00001bc008 x7 : 0000000000000000 x6 : 0000000000000008 x5 : ffff00003fd91340 x4 : 0000000000000000 x3 : 0000000000000009 x2 : 00000000fffffffe x1 : 0000000000000000 x0 : 0000000000000000 Call trace: skb_release_data+0xb8/0x1d8 kfree_skb_reason+0x48/0xb0 mse102x_tx_work+0x164/0x35c [mse102x] process_one_work+0x138/0x260 worker_thread+0x32c/0x438 kthread+0x118/0x11c ret_from_fork+0x10/0x20 Code: aa1303e0 97fffab6 72001c1f 54000141 (f9400660) Cc: [email protected] Fixes: 2f207cb ("net: vertexcom: Add MSE102x SPI support") Signed-off-by: Stefan Wahren <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Added compatibility support for 151 and 153

6e01707

Added Device Tree compatibility support for "st,stm32mp151" and "st,stm32mp153" because CubeMX generates compatble string for those MPU versions. for example: compatible = "st,stm32mp151c-stm32mp151caax-mx", "st,stm32mp151";

ADESTM closed this May 13, 2020

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Added compatibility support for 151 and 153 #2

Added compatibility support for 151 and 153 #2

koansoftware commented Mar 5, 2020 •

edited

Loading

atorgue commented Mar 9, 2020

ADESTM commented May 13, 2020

Added compatibility support for 151 and 153 #2

Added compatibility support for 151 and 153 #2

Conversation

koansoftware commented Mar 5, 2020 • edited Loading

atorgue commented Mar 9, 2020

ADESTM commented May 13, 2020

koansoftware commented Mar 5, 2020 •

edited

Loading