Support riscv #66
Labels
• arch
Related to a particular arch, `arch/` support in general...
Comments
ojeda
added
• arch
This was referenced Apr 28, 2021
Merged
|
Anything remaining for this? |
ojeda
pushed a commit
that referenced
this issue
Jul 19, 2023
The initial memblock metadata is accessed from kernel image mapping. The regions arrays need to "reallocated" from memblock and accessed through linear mapping to cover more memblock regions. So the resizing should not be allowed until linear mapping is ready. Note that there are memblock allocations when building linear mapping. This patch is similar to 24cc61d ("arm64: memblock: don't permit memblock resizing until linear mapping is up"). In following log, many memblock regions are reserved before create_linear_mapping_page_table(). And then it triggered reallocation of memblock.reserved.regions and memcpy the old array in kernel image mapping to the new array in linear mapping which caused a page fault. [ 0.000000] memblock_reserve: [0x00000000bf01f000-0x00000000bf01ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf021000-0x00000000bf021fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf023000-0x00000000bf023fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf025000-0x00000000bf025fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf027000-0x00000000bf027fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf029000-0x00000000bf029fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf02b000-0x00000000bf02bfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf02d000-0x00000000bf02dfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf02f000-0x00000000bf02ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf030000-0x00000000bf030fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] OF: reserved mem: 0x0000000080000000..0x000000008007ffff (512 KiB) map non-reusable mmode_resv0@80000000 [ 0.000000] memblock_reserve: [0x00000000bf000000-0x00000000bf001fed] paging_init+0x19a/0x5ae [ 0.000000] memblock_phys_alloc_range: 4096 bytes align=0x1000 from=0x0000000000000000 max_addr=0x0000000000000000 alloc_pmd_fixmap+0x14/0x1c [ 0.000000] memblock_reserve: [0x000000017ffff000-0x000000017fffffff] memblock_alloc_range_nid+0xb8/0x128 [ 0.000000] memblock: reserved is doubled to 256 at [0x000000017fffd000-0x000000017fffe7ff] [ 0.000000] Unable to handle kernel paging request at virtual address ff600000ffffd000 [ 0.000000] Oops [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.4.0-rc1-00011-g99a670b2069c #66 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] epc : __memcpy+0x60/0xf8 [ 0.000000] ra : memblock_double_array+0x192/0x248 [ 0.000000] epc : ffffffff8081d214 ra : ffffffff80a3dfc0 sp : ffffffff81403bd0 [ 0.000000] gp : ffffffff814fbb38 tp : ffffffff8140dac0 t0 : 0000000001600000 [ 0.000000] t1 : 0000000000000000 t2 : 000000008f001000 s0 : ffffffff81403c60 [ 0.000000] s1 : ffffffff80c0bc98 a0 : ff600000ffffd000 a1 : ffffffff80c0bcd8 [ 0.000000] a2 : 0000000000000c00 a3 : ffffffff80c0c8d8 a4 : 0000000080000000 [ 0.000000] a5 : 0000000000080000 a6 : 0000000000000000 a7 : 0000000080200000 [ 0.000000] s2 : ff600000ffffd000 s3 : 0000000000002000 s4 : 0000000000000c00 [ 0.000000] s5 : ffffffff80c0bc60 s6 : ffffffff80c0bcc8 s7 : 0000000000000000 [ 0.000000] s8 : ffffffff814fd0a8 s9 : 000000017fffe7ff s10: 0000000000000000 [ 0.000000] s11: 0000000000001000 t3 : 0000000000001000 t4 : 0000000000000000 [ 0.000000] t5 : 000000008f003000 t6 : ff600000ffffd000 [ 0.000000] status: 0000000200000100 badaddr: ff600000ffffd000 cause: 000000000000000f [ 0.000000] [<ffffffff8081d214>] __memcpy+0x60/0xf8 [ 0.000000] [<ffffffff80a3e1a2>] memblock_add_range.isra.14+0x12c/0x162 [ 0.000000] [<ffffffff80a3e36a>] memblock_reserve+0x6e/0x8c [ 0.000000] [<ffffffff80a123fc>] memblock_alloc_range_nid+0xb8/0x128 [ 0.000000] [<ffffffff80a1256a>] memblock_phys_alloc_range+0x5e/0x6a [ 0.000000] [<ffffffff80a04732>] alloc_pmd_fixmap+0x14/0x1c [ 0.000000] [<ffffffff80a0475a>] alloc_p4d_fixmap+0xc/0x14 [ 0.000000] [<ffffffff80a04a36>] create_pgd_mapping+0x98/0x17c [ 0.000000] [<ffffffff80a04e9e>] create_linear_mapping_range.constprop.10+0xe4/0x112 [ 0.000000] [<ffffffff80a05bb8>] paging_init+0x3ec/0x5ae [ 0.000000] [<ffffffff80a03354>] setup_arch+0xb2/0x576 [ 0.000000] [<ffffffff80a00726>] start_kernel+0x72/0x57e [ 0.000000] Code: b303 0285 b383 0305 be03 0385 be83 0405 bf03 0485 (b023) 00ef [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! [ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- Fixes: 671f9a3 ("RISC-V: Setup initial page tables in two stages") Signed-off-by: Woody Zhang <[email protected]> Tested-by: Song Shuai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
ojeda
pushed a commit
that referenced
this issue
Feb 19, 2024
When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference: BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec Commit a940904 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") broke DLPAR add of PCI devices. The above added iommu_device structure to pci_controller. During system boot, PCI devices are discovered and this newly added iommu_device structure is initialized by a call to iommu_device_register(). During DLPAR add of a PCI device, a new pci_controller structure is allocated but there are no calls made to iommu_device_register() interface. Fix is to register the iommu device during DLPAR add as well. Fixes: a940904 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") Signed-off-by: Gaurav Batra <[email protected]> [mpe: Trim oops and tweak some change log wording] Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
metaspace
pushed a commit
that referenced
this issue
Mar 4, 2024
…ntroller When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference: BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec Commit a940904 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") broke DLPAR add of PCI devices. The above added iommu_device structure to pci_controller. During system boot, PCI devices are discovered and this newly added iommu_device structure is initialized by a call to iommu_device_register(). During DLPAR add of a PCI device, a new pci_controller structure is allocated but there are no calls made to iommu_device_register() interface. Fix is to register the iommu device during DLPAR add as well. Fixes: a940904 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") Signed-off-by: Gaurav Batra <[email protected]> Reviewed-by: Brian King <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
ojeda
pushed a commit
that referenced
this issue
Jul 29, 2024
…b folio A kernel crash was observed when migrating hugetlb folio: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 3435 Comm: bash Not tainted 6.10.0-rc6-00450-g8578ca01f21f #66 RIP: 0010:__folio_undo_large_rmappable+0x70/0xb0 RSP: 0018:ffffb165c98a7b38 EFLAGS: 00000097 RAX: fffffbbc44528090 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffffa30e000a2800 RSI: 0000000000000246 RDI: ffffa3153ffffcc0 RBP: fffffbbc44528000 R08: 0000000000002371 R09: ffffffffbe4e5868 R10: 0000000000000001 R11: 0000000000000001 R12: ffffa3153ffffcc0 R13: fffffbbc44468000 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f5b3a716740(0000) GS:ffffa3151fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010959a000 CR4: 00000000000006f0 Call Trace: <TASK> __folio_migrate_mapping+0x59e/0x950 __migrate_folio.constprop.0+0x5f/0x120 move_to_new_folio+0xfd/0x250 migrate_pages+0x383/0xd70 soft_offline_page+0x2ab/0x7f0 soft_offline_page_store+0x52/0x90 kernfs_fop_write_iter+0x12c/0x1d0 vfs_write+0x380/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5b3a514887 RSP: 002b:00007ffe138fce68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f5b3a514887 RDX: 000000000000000c RSI: 0000556ab809ee10 RDI: 0000000000000001 RBP: 0000556ab809ee10 R08: 00007f5b3a5d1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007f5b3a61b780 R14: 00007f5b3a617600 R15: 00007f5b3a616a00 It's because hugetlb folio is passed to __folio_undo_large_rmappable() unexpectedly. large_rmappable flag is imperceptibly set to hugetlb folio since commit f6a8dd9 ("hugetlb: convert alloc_buddy_hugetlb_folio to use a folio"). Then commit be9581e ("mm: fix crashes from deferred split racing folio migration") makes folio_migrate_mapping() call folio_undo_large_rmappable() triggering the bug. Fix this issue by clearing large_rmappable flag for hugetlb folios. They don't need that flag set anyway. Link: https://lkml.kernel.org/r/[email protected] Fixes: f6a8dd9 ("hugetlb: convert alloc_buddy_hugetlb_folio to use a folio") Fixes: be9581e ("mm: fix crashes from deferred split racing folio migration") Signed-off-by: Miaohe Lin <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Matthew Wilcox (Oracle) <[email protected]> Cc: Muchun Song <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
fbq
pushed a commit
that referenced
this issue
Sep 30, 2024
On resume of the Raspberry Pi the dwc2 driver fails to enable HCD_FLAG_HW_ACCESSIBLE before re-enabling the interrupts. This causes a situation where both handler ignore a incoming port interrupt and force the upper layers to disable the dwc2 interrupt line. This leaves the USB interface in a unusable state: irq 66: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.10.0-rc3 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x50/0x64 dump_stack_lvl from __report_bad_irq+0x38/0xc0 __report_bad_irq from note_interrupt+0x2ac/0x2f4 note_interrupt from handle_irq_event+0x88/0x8c handle_irq_event from handle_level_irq+0xb4/0x1ac handle_level_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28 bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44 generic_handle_arch_irq from __irq_svc+0x88/0xb0 Exception stack(0xc1b01f20 to 0xc1b01f68) 1f20: 0005c0d 00000001 00000000 00000000 c1b09780 c1d6b32c c1b04e54 c1a5eae8 1f40: c1b04e90 00000000 00000000 00000000 c1d6a8a0 c1b01f70 c11d2da8 c11d4160 1f60: 60000013 ffffffff __irq_svc from default_idle_call+0x1c/0xb0 default_idle_call from do_idle+0x21c/0x284 do_idle from cpu_startup_entry+0x28/0x2c cpu_startup_entry from kernel_init+0x0/0x12c handlers: [<f539e0f4>] dwc2_handle_common_intr [<75cd278b>] usb_hcd_irq Disabling IRQ #66 Disabling clock gating workaround this issue. Fixes: 0112b7c ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.") Link: https://lore.kernel.org/linux-usb/[email protected]/T/ Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Stefan Wahren <[email protected]> Acked-by: Minas Harutyunyan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
RISC-V is supported upstream nowadays. |
ojeda
pushed a commit
that referenced
this issue
Dec 16, 2024
The Raspberry Pi can suffer on interrupt storms on HCD resume. The dwc2 driver sometimes misses to enable HCD_FLAG_HW_ACCESSIBLE before re-enabling the interrupts. This causes a situation where both handler ignore a incoming port interrupt and force the upper layers to disable the dwc2 interrupt line. This leaves the USB interface in a unusable state: irq 66: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.10.0-rc3 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x50/0x64 dump_stack_lvl from __report_bad_irq+0x38/0xc0 __report_bad_irq from note_interrupt+0x2ac/0x2f4 note_interrupt from handle_irq_event+0x88/0x8c handle_irq_event from handle_level_irq+0xb4/0x1ac handle_level_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28 bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44 generic_handle_arch_irq from __irq_svc+0x88/0xb0 Exception stack(0xc1b01f20 to 0xc1b01f68) 1f20: 0005c0d 00000001 00000000 00000000 c1b09780 c1d6b32c c1b04e54 c1a5eae8 1f40: c1b04e90 00000000 00000000 00000000 c1d6a8a0 c1b01f70 c11d2da8 c11d4160 1f60: 60000013 ffffffff __irq_svc from default_idle_call+0x1c/0xb0 default_idle_call from do_idle+0x21c/0x284 do_idle from cpu_startup_entry+0x28/0x2c cpu_startup_entry from kernel_init+0x0/0x12c handlers: [<f539e0f4>] dwc2_handle_common_intr [<75cd278b>] usb_hcd_irq Disabling IRQ #66 So enable the HCD_FLAG_HW_ACCESSIBLE flag in case there is a port connection. Fixes: c74c26f ("usb: dwc2: Fix partial power down exiting by system resume") Closes: https://lore.kernel.org/linux-usb/[email protected]/T/ Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Stefan Wahren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
ojeda
pushed a commit
that referenced
this issue
Dec 16, 2024
On Raspberry Pis without onboard USB hub frequent device reconnects can trigger a interrupt storm after DWC2 entered host clock gating. This is caused by a race between _dwc2_hcd_suspend() and the port interrupt, which sets port_connect_status. The issue occurs if port_connect_status is still 1, but there is no connection anymore: usb 1-1: USB disconnect, device number 25 dwc2 3f980000.usb: _dwc2_hcd_suspend: port_connect_status: 1 dwc2 3f980000.usb: Entering host clock gating. Disabling IRQ #66 irq 66: nobody cared (try booting with the "irqpoll" option) CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-gc1bb81b13202-dirty #322 Hardware name: BCM2835 Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x50/0x64 dump_stack_lvl from __report_bad_irq+0x38/0xc0 __report_bad_irq from note_interrupt+0x2ac/0x2f4 note_interrupt from handle_irq_event+0x88/0x8c handle_irq_event from handle_level_irq+0xb4/0x1ac handle_level_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from bcm2836_chained_handle_irq+0x24/0x28 bcm2836_chained_handle_irq from generic_handle_domain_irq+0x24/0x34 generic_handle_domain_irq from generic_handle_arch_irq+0x34/0x44 generic_handle_arch_irq from __irq_svc+0x88/0xb0 Exception stack(0xc1d01f20 to 0xc1d01f68) 1f20: 0004ef3c 00000001 00000000 00000000 c1d09780 c1f6bb5c c1d04e54 c1c60ca8 1f40: c1d04e94 00000000 00000000 c1d092a8 c1f6af20 c1d01f70 c1211b98 c1212f40 1f60: 60000013 ffffffff __irq_svc from default_idle_call+0x1c/0xb0 default_idle_call from do_idle+0x21c/0x284 do_idle from cpu_startup_entry+0x28/0x2c cpu_startup_entry from kernel_init+0x0/0x12c handlers: [<e3a25c00>] dwc2_handle_common_intr [<58bf98a3>] usb_hcd_irq Disabling IRQ #66 So avoid this by reading the connection status directly. Fixes: 113f86d ("usb: dwc2: Update partial power down entering by system suspend") Signed-off-by: Stefan Wahren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
metaspace
pushed a commit
to metaspace/linux
that referenced
this issue
Dec 17, 2024
commit fd0af4c upstream. The power suppliers are always requested to suspend asynchronously, dev_pm_domain_detach() requires the caller to ensure proper synchronization of this function with power management callbacks. otherwise the detach may led to kernel panic, like below: [ 1457.107934] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040 [ 1457.116777] Mem abort info: [ 1457.119589] ESR = 0x0000000096000004 [ 1457.123358] EC = 0x25: DABT (current EL), IL = 32 bits [ 1457.128692] SET = 0, FnV = 0 [ 1457.131764] EA = 0, S1PTW = 0 [ 1457.134920] FSC = 0x04: level 0 translation fault [ 1457.139812] Data abort info: [ 1457.142707] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1457.148196] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1457.153256] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1457.158563] user pgtable: 4k pages, 48-bit VAs, pgdp=00000001138b6000 [ 1457.165000] [0000000000000040] pgd=0000000000000000, p4d=0000000000000000 [ 1457.171792] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 1457.178045] Modules linked in: v4l2_jpeg wave6_vpu_ctrl(-) [last unloaded: mxc_jpeg_encdec] [ 1457.186383] CPU: 0 PID: 51938 Comm: kworker/0:3 Not tainted 6.6.36-gd23d64eea511 Rust-for-Linux#66 [ 1457.194112] Hardware name: NXP i.MX95 19X19 board (DT) [ 1457.199236] Workqueue: pm pm_runtime_work [ 1457.203247] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1457.210188] pc : genpd_runtime_suspend+0x20/0x290 [ 1457.214886] lr : __rpm_callback+0x48/0x1d8 [ 1457.218968] sp : ffff80008250bc50 [ 1457.222270] x29: ffff80008250bc50 x28: 0000000000000000 x27: 0000000000000000 [ 1457.229394] x26: 0000000000000000 x25: 0000000000000008 x24: 00000000000f4240 [ 1457.236518] x23: 0000000000000000 x22: ffff00008590f0e4 x21: 0000000000000008 [ 1457.243642] x20: ffff80008099c434 x19: ffff00008590f000 x18: ffffffffffffffff [ 1457.250766] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 63343a6d726f6674 [ 1457.257890] x14: 0000000000000004 x13: 00000000000003a4 x12: 0000000000000002 [ 1457.265014] x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff80008250bbb0 [ 1457.272138] x8 : ffff000092937200 x7 : ffff0003fdf6af80 x6 : 0000000000000000 [ 1457.279262] x5 : 00000000410fd050 x4 : 0000000000200000 x3 : 0000000000000000 [ 1457.286386] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008590f000 [ 1457.293510] Call trace: [ 1457.295946] genpd_runtime_suspend+0x20/0x290 [ 1457.300296] __rpm_callback+0x48/0x1d8 [ 1457.304038] rpm_callback+0x6c/0x78 [ 1457.307515] rpm_suspend+0x10c/0x570 [ 1457.311077] pm_runtime_work+0xc4/0xc8 [ 1457.314813] process_one_work+0x138/0x248 [ 1457.318816] worker_thread+0x320/0x438 [ 1457.322552] kthread+0x110/0x114 [ 1457.325767] ret_from_fork+0x10/0x20 Fixes: 2db16c6 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder") Cc: <[email protected]> Signed-off-by: Ming Qian <[email protected]> Reviewed-by: TaoJiang <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
This architecture is becoming more popular as time passes and is on the forefront of open research, so it would be a fitting and welcome addition to provide its users with Rust support. In particular, the 64-bit one.
Linux riscv targets with official Ubuntu binutils etc. support:
In particular, there is no official 32-bit Ubuntu binutils package so far.
The text was updated successfully, but these errors were encountered: