New package: jq

checksums/jq-1.6.tar.gz.sha512

@@ -0,0 +1 @@
+5da71f53c325257f1f546a2520fe47828b495c953270df25ea0e37741463fdda72f0ba4d5b05b25114ec30f27a559344c2b024bacabf610759f4e3e9efadb480

checksums/onig-6.9.1.tar.gz.sha512

@@ -0,0 +1 @@
+5454c161d2d45f2c992513a695ff586ffa99e44a27d7ac5498370e200adb664bb02f2d8cd7d73e61d467f626d1a9b41d9e6e3051e1ea1a021624f94f7d52975f

make/jq.mk

@@ -0,0 +1,252 @@
+###########################################################
+#
+# jq
+#
+###########################################################
+#
+# JQ_VERSION, JQ_SITE and JQ_SOURCE define
+# the upstream location of the source code for the package.
+# JQ_DIR is the directory which is created when the source
+# archive is unpacked.
+# JQ_UNZIP is the command used to unzip the source.
+# It is usually "zcat" (for .gz) or "bzcat" (for .bz2)
+#
+# You should change all these variables to suit your package.
+# Please make sure that you add a description, and that you
+# list all your packages' dependencies, seperated by commas.
+# 
+# If you list yourself as MAINTAINER, please give a valid email
+# address, and indicate your irc nick if it cannot be easily deduced
+# from your name or email address.  If you leave MAINTAINER set to
+# "NSLU2 Linux" other developers will feel free to edit.
+#
+JQ_URL=https://github.com/stedolan/jq/releases/download/jq-$(JQ_VERSION)
+JQ_VERSION=1.6
+JQ_SOURCE=jq-$(JQ_VERSION).tar.gz
+JQ_DIR=jq-$(JQ_VERSION)
+JQ_UNZIP=zcat
+JQ_MAINTAINER=NSLU2 Linux <[email protected]>
+JQ_DESCRIPTION=Lightweight and flexible command-line JSON processor
+JQ_SECTION=util
+JQ_PRIORITY=optional
+JQ_DEPENDS=oniguruma
+JQ_SUGGESTS=
+JQ_CONFLICTS=
+
+#
+# JQ_IPK_VERSION should be incremented when the ipk changes.
+#
+JQ_IPK_VERSION=1
+
+#
+# JQ_CONFFILES should be a list of user-editable files
+#JQ_CONFFILES=$(TARGET_PREFIX)/etc/jq.conf $(TARGET_PREFIX)/etc/init.d/SXXjq
+
+#
+# JQ_PATCHES should list any patches, in the the order in
+# which they should be applied to the source code.
+#
+#JQ_PATCHES=$(JQ_SOURCE_DIR)/configure.patch
+
+#
+# If the compilation of the package requires additional
+# compilation or linking flags, then list them here.
+#
+JQ_CPPFLAGS=
+JQ_LDFLAGS=
+
+#
+# JQ_BUILD_DIR is the directory in which the build is done.
+# JQ_SOURCE_DIR is the directory which holds all the
+# patches and ipkg control files.
+# JQ_IPK_DIR is the directory in which the ipk is built.
+# JQ_IPK is the name of the resulting ipk files.
+#
+# You should not change any of these variables.
+#
+JQ_BUILD_DIR=$(BUILD_DIR)/jq
+JQ_SOURCE_DIR=$(SOURCE_DIR)/jq
+JQ_IPK_DIR=$(BUILD_DIR)/jq-$(JQ_VERSION)-ipk
+JQ_IPK=$(BUILD_DIR)/jq_$(JQ_VERSION)-$(JQ_IPK_VERSION)_$(TARGET_ARCH).ipk
+JQ_DEV_IPK_DIR=$(BUILD_DIR)/jq-dev-$(JQ_VERSION)-ipk
+JQ_DEV_IPK=$(BUILD_DIR)/jq-dev_$(JQ_VERSION)-$(JQ_IPK_VERSION)_$(TARGET_ARCH).ipk
+
+.PHONY: jq-source jq-unpack jq jq-stage jq-ipk jq-clean jq-dirclean jq-check
+
+#
+# This is the dependency on the source code.  If the source is missing,
+# then it will be fetched from the site using wget.
+# $(JQ_URL) holds the link to the source,
+# which is saved to $(DL_DIR)/$(JQ_SOURCE).
+# When adding new package, remember to place sha512sum of the source to
+# scripts/checksums/$(JQ_SOURCE).sha512
+#
+$(DL_DIR)/$(JQ_SOURCE):
+	$(WGET) -P $(@D) $(JQ_URL)/$(@F) || \
+	$(WGET) -P $(@D) $(SOURCES_NLO_SITE)/$(@F)
+
+#
+# The source code depends on it existing within the download directory.
+# This target will be called by the top level Makefile to download the
+# source code's archive (.tar.gz, .bz2, etc.)
+#
+jq-source: $(DL_DIR)/$(JQ_SOURCE) $(JQ_PATCHES)
+
+#
+# This target unpacks the source code in the build directory.
+# If the source archive is not .tar.gz or .tar.bz2, then you will need
+# to change the commands here.  Patches to the source code are also
+# applied in this target as required.
+#
+# This target also configures the build within the build directory.
+# Flags such as LDFLAGS and CPPFLAGS should be passed into configure
+# and NOT $(MAKE) below.  Passing it to configure causes configure to
+# correctly BUILD the Makefile with the right paths, where passing it
+# to Make causes it to override the default search paths of the compiler.
+#
+# If the compilation of the package requires other packages to be staged
+# first, then do that first (e.g. "$(MAKE) <bar>-stage <baz>-stage").
+#
+# If the package uses  GNU libtool, you should invoke $(PATCH_LIBTOOL) as
+# shown below to make various patches to it.
+#
+$(JQ_BUILD_DIR)/.configured: $(DL_DIR)/$(JQ_SOURCE) $(JQ_PATCHES) make/jq.mk
+	$(MAKE) oniguruma-stage
+	rm -rf $(BUILD_DIR)/$(JQ_DIR) $(@D)
+	$(JQ_UNZIP) $(DL_DIR)/$(JQ_SOURCE) | tar -C $(BUILD_DIR) -xvf -
+	if test -n "$(JQ_PATCHES)" ; \
+		then cat $(JQ_PATCHES) | \
+		$(PATCH) -d $(BUILD_DIR)/$(JQ_DIR) -p0 ; \
+	fi
+	if test "$(BUILD_DIR)/$(JQ_DIR)" != "$(@D)" ; \
+		then mv $(BUILD_DIR)/$(JQ_DIR) $(@D) ; \
+	fi
+	(cd $(@D); \
+		$(TARGET_CONFIGURE_OPTS) \
+		CPPFLAGS="$(STAGING_CPPFLAGS) $(JQ_CPPFLAGS)" \
+		LDFLAGS="$(STAGING_LDFLAGS) $(JQ_LDFLAGS)" \
+		./configure \
+		--build=$(GNU_HOST_NAME) \
+		--host=$(GNU_TARGET_NAME) \
+		--target=$(GNU_TARGET_NAME) \
+		--prefix=$(TARGET_PREFIX) \
+		--disable-nls \
+		--disable-static \
+		--disable-valgrind \
+		--disable-docs \
+	)
+	$(PATCH_LIBTOOL) $(@D)/libtool
+	touch $@
+
+jq-unpack: $(JQ_BUILD_DIR)/.configured
+
+#
+# This builds the actual binary.
+#
+$(JQ_BUILD_DIR)/.built: $(JQ_BUILD_DIR)/.configured
+	rm -f $@
+	$(MAKE) -C $(@D)
+	touch $@
+#
+# This is the build convenience target.
+#
+jq: $(JQ_BUILD_DIR)/.built
+
+#
+# If you are building a library, then you need to stage it too.
+#
+$(JQ_BUILD_DIR)/.staged: $(JQ_BUILD_DIR)/.built
+	rm -f $@
+	$(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) install
+	touch $@
+
+jq-stage: $(JQ_BUILD_DIR)/.staged
+
+#
+# This rule creates a control file for ipkg.  It is no longer
+# necessary to create a seperate control file under sources/jq
+#
+$(JQ_IPK_DIR)/CONTROL/control:
+	@$(INSTALL) -d $(@D)
+	@rm -f $@
+	@echo "Package: jq" >>$@
+	@echo "Architecture: $(TARGET_ARCH)" >>$@
+	@echo "Priority: $(JQ_PRIORITY)" >>$@
+	@echo "Section: $(JQ_SECTION)" >>$@
+	@echo "Version: $(JQ_VERSION)-$(JQ_IPK_VERSION)" >>$@
+	@echo "Maintainer: $(JQ_MAINTAINER)" >>$@
+	@echo "Source: $(JQ_URL)" >>$@
+	@echo "Description: $(JQ_DESCRIPTION)" >>$@
+	@echo "Depends: $(JQ_DEPENDS)" >>$@
+	@echo "Suggests: $(JQ_SUGGESTS)" >>$@
+	@echo "Conflicts: $(JQ_CONFLICTS)" >>$@
+
+$(JQ_DEV_IPK_DIR)/CONTROL/control:
+	@$(INSTALL) -d $(@D)
+	@rm -f $@
+	@echo "Package: jq-dev" >>$@
+	@echo "Architecture: $(TARGET_ARCH)" >>$@
+	@echo "Priority: $(JQ_PRIORITY)" >>$@
+	@echo "Section: $(JQ_SECTION)" >>$@
+	@echo "Version: $(JQ_VERSION)-$(JQ_IPK_VERSION)" >>$@
+	@echo "Maintainer: $(JQ_MAINTAINER)" >>$@
+	@echo "Source: $(JQ_URL)" >>$@
+	@echo "Description: Development files for JQ" >>$@
+	@echo "Depends: jq" >>$@
+	@echo "Suggests: $(JQ_SUGGESTS)" >>$@
+	@echo "Conflicts: $(JQ_CONFLICTS)" >>$@
+
+#
+# This builds the IPK file.
+#
+# Binaries should be installed into $(JQ_IPK_DIR)$(TARGET_PREFIX)/sbin or $(JQ_IPK_DIR)$(TARGET_PREFIX)/bin
+# (use the location in a well-known Linux distro as a guide for choosing sbin or bin).
+# Libraries and include files should be installed into $(JQ_IPK_DIR)$(TARGET_PREFIX)/{lib,include}
+# Configuration files should be installed in $(JQ_IPK_DIR)$(TARGET_PREFIX)/etc/jq/...
+# Documentation files should be installed in $(JQ_IPK_DIR)$(TARGET_PREFIX)/doc/jq/...
+# Daemon startup scripts should be installed in $(JQ_IPK_DIR)$(TARGET_PREFIX)/etc/init.d/S??jq
+#
+# You may need to patch your application to make it use these locations.
+#
+$(JQ_IPK) $(JQ_DEV_IPK): $(JQ_BUILD_DIR)/.built
+	rm -rf	$(JQ_IPK_DIR) $(BUILD_DIR)/jq_*_$(TARGET_ARCH).ipk \
+		$(JQ_DEV_IPK_DIR) $(BUILD_DIR)/jq-dev_*_$(TARGET_ARCH).ipk
+	$(MAKE) -C $(JQ_BUILD_DIR) DESTDIR=$(JQ_IPK_DIR) install-strip
+	$(MAKE) -C $(JQ_BUILD_DIR) DESTDIR=$(JQ_DEV_IPK_DIR) install-strip
+	rm -fr	$(JQ_IPK_DIR)$(TARGET_PREFIX)/include \
+		$(JQ_IPK_DIR)$(TARGET_PREFIX)/lib/*.la \
+		$(JQ_IPK_DIR)$(TARGET_PREFIX)/share/doc
+	rm -fr	$(JQ_DEV_IPK_DIR)$(TARGET_PREFIX)/bin \
+		$(JQ_DEV_IPK_DIR)$(TARGET_PREFIX)/lib \
+		$(JQ_DEV_IPK_DIR)$(TARGET_PREFIX)/share
+	$(MAKE) $(JQ_IPK_DIR)/CONTROL/control
+	$(MAKE) $(JQ_DEV_IPK_DIR)/CONTROL/control
+	cd $(BUILD_DIR); $(IPKG_BUILD) $(JQ_IPK_DIR)
+	cd $(BUILD_DIR); $(IPKG_BUILD) $(JQ_DEV_IPK_DIR)
+	$(WHAT_TO_DO_WITH_IPK_DIR) $(JQ_IPK_DIR) $(JQ_DEV_IPK_DIR)
+
+#
+# This is called from the top level makefile to create the IPK file.
+#
+jq-ipk: $(JQ_IPK) $(JQ_DEV_IPK)
+
+#
+# This is called from the top level makefile to clean all of the built files.
+#
+jq-clean:
+	rm -f $(JQ_BUILD_DIR)/.built
+	-$(MAKE) -C $(JQ_BUILD_DIR) clean
+
+#
+# This is called from the top level makefile to clean all dynamically created
+# directories.
+#
+jq-dirclean:
+	rm -rf $(BUILD_DIR)/$(JQ_DIR) $(JQ_BUILD_DIR) $(JQ_IPK_DIR) $(JQ_IPK) \
+		$(JQ_DEV_IPK_DIR) $(JQ_DEV_IPK)
+#
+#
+# Some sanity check for the package.
+#
+jq-check: $(JQ_IPK) $(JQ_DEV_IPK)
+	perl scripts/optware-check-package.pl --target=$(OPTWARE_TARGET) $^