FM only tracks filament use on Spool 0

[mpd352]

Describe the bug
A clear and concise description of what the bug is.
I have a GeeeTech A10T, which is a three spool printer. Filament Manager is configured to allow me to select a specific spool from the spool database for each extruder. The correct number of extruders is set in Octoprint Setup, and the shared hotend flag is set.

Expected behavior
Filament usage should be tracked on Spool 1 and 2 as well

Log file
Drag and drop the octoprint.log here.
octoprint Part 01.log
octoprint Part 02.log

Screenshots
If applicable, add screenshots to help explain your problem.

Additional context
Add any other context about the problem here.

[WarrenSchultz]

Confirmed, seeing this issue as well, came here to file a bug. :)

[OllisGit]

As mentioned in the other ticket please provide the corresponding gcode file, so that I am able to reproduce the issue in my environment.
@WarrenSchultz same question to you:

• screenshot of what you expect and the gcode file.

[mpd352]

Sorry, thought I had uploaded these.

Ornaments 01_colored.txt

The forum won't let me upload a gcode file so I renamed Ornaments.01_colored.gcode to Ornaments.01_colored.txt

[OllisGit]

Hi @mpd352 ,
I looked into the gcode and there is only T2 used and not T1.

This is also detected by OctoPrint itself, only Tool 2 is shown:

[WarrenSchultz]

@OllisGit

LeftAnchorBlock_0.2mm_ABS_MK3SMMU2S_12h19m.gcode.zip

The print is set to use Tool 4, the Filament Manager has Tool 4 showing the correct filament. Printing, everything works well, but the remaining filament counter for tool 4 (in this case, ABS) is not decremented with use. On a print using T0 (PLA in this case), it would work fine.

[OllisGit]

Hi @WarrenSchultz,

I did some test and for your provided gcode the FilamentManager only detect ~55mm for Tool4, but it should 76997.75167999369.

Currently I am rewriting the whole filamenttracker-logic, because it didn't work in some cases, "obviously" ;-)
Will be finished this weekend...hopefully

[mpd352]

Hi @WarrenSchultz,

I did some test and for your provided gcode the FilamentManager only detect ~55mm for Tool4, but it should 76997.75167999369.

Currently I am rewriting the whole filamenttracker-logic, because it didn't work in some cases, "obviously" ;-)
Will be finished this weekend...hopefully

Thank you! We appreciate the time and effort.

[OllisGit]

Hi,

new release 1.7.1 is out and should fix some material tracking issue.
After resuming a multi extruder print, the following tracked filament is assigned to tool0. To fix that issue I reimplemented the whole material tracking (maybe it solves other issues as well ;-).

Please retest with the new version and give me a feedback!