Fix the position of TS0601_curtain #1603

dinhchinh82 · 2020-09-29T08:33:09Z

At current, after pairing the TS0601_curtain to Zigbee coordinator, the position is not correct. Beside that, the direction from Home Assistant is also not synchronized with the direction of RF remote.
I've tried some advanced configuration as below but still not success:

If we set the reverse_direction to true, the position is still not correct
Even If we set the invert_cover: true in the configuration.yaml file, the position is still not correct.
Tried some combination between reverse_direction & invert_cover and still not work.

Solution:

Fix the logic to calculate the position
Still need to set the invert_cover option to true.

Koenkk · 2020-09-29T09:21:07Z

What is the value when the cover is fully opened and what value when fully closed (without setting invert_cover in configuration.yaml?

dinhchinh82 · 2020-09-29T09:51:16Z

@Koenkk here are the detail without setting invert_cover:

Fully opened:
Zigbee2MQTT:info 2020-09-29 16:47:16: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe687c8d', payload '{"linkquality":76,"position":0,"running":false}'
Home assistant:
https://prnt.sc/upunh8
Fully closed:
Zigbee2MQTT:info 2020-09-29 16:46:17: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe687c8d', payload '{"linkquality":63,"position":100,"running":false}'
Home assistant:
https://prnt.sc/upuom9

Koenkk · 2020-09-29T15:14:59Z

That is not correct, for zigbee-herdsman-converters 100 = open, 0 = closed (

zigbee-herdsman-converters/converters/toZigbee.js

Line 284 in 42defcd

// For zigbee-herdsman-converters: open = 100, close = 0

) so https://github.com/Koenkk/zigbee-herdsman-converters/pull/1603/files#diff-3e0c275bd41af699153bf59d8dda4a2aR2676 should be undone.

The invert_cover option in configuration.yaml can be used when your home automation software expects the opposite (0 = open, 100 = closed)

dinhchinh82 · 2020-09-29T15:32:28Z

That is not correct, for zigbee-herdsman-converters 100 = open, 0 = closed (

zigbee-herdsman-converters/converters/toZigbee.js

Line 284 in 42defcd

// For zigbee-herdsman-converters: open = 100, close = 0

) so https://github.com/Koenkk/zigbee-herdsman-converters/pull/1603/files#diff-3e0c275bd41af699153bf59d8dda4a2aR2676 should be undone.
The invert_cover option in configuration.yaml can be used when your home automation software expects the opposite (0 = open, 100 = closed)

Yes. That's correct to set the invert_cover to be true in the configuration.yaml. But without this PR, the open/close icon to control the motor from Home Assistant is still not correct.

This is the test scenario:

Set the invert_cover to "true" in "configuration.yaml"
https://prnt.sc/uq14gd
Using the remote to close the curtain (fully closed)
The current panel to control the curtain from Home Assistant.
https://prnt.sc/uq169f

So for this case, it is not able to open the curtain from the Home Assistant.
If I use the modified code in this PR, everything works well.

Thank you.

Koenkk · 2020-09-29T15:35:51Z

I don't understand, why did you set invert_cover in your configuration.yaml? This is not needed for Home Assistant

dinhchinh82 · 2020-09-29T15:53:12Z

I don't understand, why did you set invert_cover in your configuration.yaml? This is not needed for Home Assistant

Sorry to make you confused but actually this case is quite difficult to explain.

Please check the 2nd test scenario when I keep the default setting :

Keep the original setting (without set the 'invert_cover' in the 'configuration.yaml')
https://prnt.sc/uq1g1m
Using the remote to close the curtain (fully closed)
The current panel to control the curtain from Home Assistant is still not correct:
https://prnt.sc/uq1jdl
as you can see in the picture, even the curtain is fully closed but it's unable to open the curtain from Home Assistant (the icon to open is unable to click).

Koenkk · 2020-09-29T15:55:24Z

Isn't the problem that the remote doesn't update the position correctly?

Can you provide a debug log of this problem and clearly annotate at which moments you executed commands with the remote?

dinhchinh82 · 2020-09-29T16:42:10Z

There are 2 problems here:

The Open/close button on the remote is opposite with the direction of the curtain
The icon button in the Home Assistant to control is also opposite. It's unable to open the curtain from Home Assistant after closing it using remote or unable to close curtain after opening it by remote.

Here are the debug log:

1. Using remote to OPEN the curtain (actually I must use the close button on the remote to open the curtain)
Zigbee2MQTT:info 2020-09-29 23:15:51: MQTT publish: topic 'zigbee2mqtt/0x086bd7fffed0655a', payload '{"linkquality":78,"state_l1":"ON"}'
Zigbee2MQTT:info 2020-09-29 23:15:51: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":78,"position":100,"running":true}'
Zigbee2MQTT:info 2020-09-29 23:15:51: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":78,"position":100,"running":true}'
Zigbee2MQTT:info 2020-09-29 23:15:51: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":78,"position":100,"running":true}'
Zigbee2MQTT:info 2020-09-29 23:15:51: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":78,"position":100,"running":true}'
Zigbee2MQTT:info 2020-09-29 23:15:51: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":78,"position":100,"running":true}'
Zigbee2MQTT:info 2020-09-29 23:16:33: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":78,"position":0,"running":false}'
=> at this moment, the curtain is fully OPENDED.
The widget panel from Home Assistant:
https://prnt.sc/uq2gny

2. Using remote to CLOSE the curtain (actually I must use the OPEN button on the remote to close the curtain)
Zigbee2MQTT:info 2020-09-29 23:19:19: MQTT publish: topic 'zigbee2mqtt/0x086bd7fffed0655a', payload '{"linkquality":81,"state_l1":"OFF"}'
Zigbee2MQTT:info 2020-09-29 23:19:19: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":78,"position":0,"running":true}'
Zigbee2MQTT:info 2020-09-29 23:19:19: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":78,"position":0,"running":true}'
Zigbee2MQTT:info 2020-09-29 23:19:19: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":78,"position":0,"running":true}'
Zigbee2MQTT:info 2020-09-29 23:19:19: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":75,"position":0,"running":true}'
Zigbee2MQTT:info 2020-09-29 23:19:20: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":75,"position":0,"running":true}'
Zigbee2MQTT:info 2020-09-29 23:20:02: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":75,"position":100,"running":false}'
=> At this moment the curtain is fully CLOSED.
The widget panel from Home Assistant:
https://prnt.sc/uq2hkw

##Environment for Testing:

Zigbee2mqtt 1.4.4 HassIO add-on
Home Assistant 0.114.4

Koenkk · 2020-09-29T16:56:56Z

That's indeed the opposite of what it should be, but is Fix the position of TS0601_curtain #1603 (comment) and Fix the position of TS0601_curtain #1603 (comment) without or with your changes?
When you now send to zigbee2mqtt/0xec1bbdfffe6875e4/set payload {"position": 100} does the curtain open or close?

dinhchinh82 · 2020-09-29T17:09:04Z

That's indeed the opposite of what it should be, but is #1603 (comment) and #1603 (comment) without or with your changes?

All the comments above are WITHOUT my change . I just reported the current situation.

When you now send to zigbee2mqtt/0xec1bbdfffe6875e4/set payload {"position": 100} does the curtain open or close?

Just send this message and the curtain is opening.
After the curtain is fully opened, the current state is as below:
Zigbee2MQTT:info 2020-09-30 00:06:35: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":21,"position":0,"running":false}'

dinhchinh82 · 2020-09-29T17:12:44Z

Just send the message
zigbee2mqtt/0xec1bbdfffe6875e4/set payload {"position": 0}

then then curtain is closing as below:

Zigbee2MQTT:info 2020-09-30 00:08:24: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":21,"position":0,"running":true}'
Zigbee2MQTT:info 2020-09-30 00:08:27: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":21,"position":0,"running":true}'
Zigbee2MQTT:info 2020-09-30 00:08:27: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":15,"position":0,"running":true}'
Zigbee2MQTT:info 2020-09-30 00:08:27: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":15,"position":0,"running":true}'
Zigbee2MQTT:info 2020-09-30 00:08:27: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":18,"position":0,"running":true}'
Zigbee2MQTT:info 2020-09-30 00:08:27: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":15,"position":0,"running":true}'
Zigbee2MQTT:info 2020-09-30 00:08:31: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":21,"position":20,"running":false}'
Zigbee2MQTT:info 2020-09-30 00:08:34: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":15,"position":20,"running":true}'
Zigbee2MQTT:info 2020-09-30 00:08:38: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":27,"position":0,"running":false}'
Zigbee2MQTT:info 2020-09-30 00:09:52: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":21,"position":0,"running":true}''
Zigbee2MQTT:info 2020-09-30 00:10:35: MQTT publish: topic 'zigbee2mqtt/0xec1bbdfffe6875e4', payload '{"linkquality":18,"position":100,"running":false}'

Koenkk · 2020-09-29T19:55:30Z

All the comments above are WITHOUT my change . I just reported the current situation.

Good, that is what caused the confusion on my side.

So I assume with your changes:

position 100 = open
position 0 = closed
setting position 100 will open the curtain and report position 100
setting position 0 will close the curtain and report position 0

dinhchinh82 · 2020-09-30T02:09:25Z

So I assume with your changes:

position 100 = open

position 0 = closed

setting position 100 will open the curtain and report position 100

setting position 0 will close the curtain and report position 0

That's right. Your understanding is correct. These information above is what I want to explain.

Koenkk · 2020-09-30T14:36:54Z

Thanks!

dinhchinh82 added 2 commits September 29, 2020 14:52

Fix the status of TS0601_curtain Zigbee with RF remote

24950d7

synchronize the direction of TS0601_curtain with RF remote

ffe635d

Koenkk merged commit f327b74 into Koenkk:master Sep 30, 2020

Koenkk mentioned this pull request Oct 9, 2020

Cover position issues with >=1.14.3 version Koenkk/zigbee2mqtt#4412

Closed

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Fix the position of TS0601_curtain #1603

Fix the position of TS0601_curtain #1603

dinhchinh82 commented Sep 29, 2020 •

edited

Loading

Koenkk commented Sep 29, 2020 •

edited

Loading

dinhchinh82 commented Sep 29, 2020

Koenkk commented Sep 29, 2020

dinhchinh82 commented Sep 29, 2020 •

edited

Loading

Koenkk commented Sep 29, 2020

dinhchinh82 commented Sep 29, 2020 •

edited

Loading

Koenkk commented Sep 29, 2020

dinhchinh82 commented Sep 29, 2020 •

edited

Loading

Koenkk commented Sep 29, 2020 •

edited

Loading

dinhchinh82 commented Sep 29, 2020 •

edited

Loading

dinhchinh82 commented Sep 29, 2020

Koenkk commented Sep 29, 2020 •

edited

Loading

dinhchinh82 commented Sep 30, 2020

Koenkk commented Sep 30, 2020

Fix the position of TS0601_curtain #1603

Fix the position of TS0601_curtain #1603

Conversation

dinhchinh82 commented Sep 29, 2020 • edited Loading

Koenkk commented Sep 29, 2020 • edited Loading

dinhchinh82 commented Sep 29, 2020

Koenkk commented Sep 29, 2020

dinhchinh82 commented Sep 29, 2020 • edited Loading

Koenkk commented Sep 29, 2020

dinhchinh82 commented Sep 29, 2020 • edited Loading

Koenkk commented Sep 29, 2020

dinhchinh82 commented Sep 29, 2020 • edited Loading

Koenkk commented Sep 29, 2020 • edited Loading

dinhchinh82 commented Sep 29, 2020 • edited Loading

dinhchinh82 commented Sep 29, 2020

Koenkk commented Sep 29, 2020 • edited Loading

dinhchinh82 commented Sep 30, 2020

Koenkk commented Sep 30, 2020

dinhchinh82 commented Sep 29, 2020 •

edited

Loading

Koenkk commented Sep 29, 2020 •

edited

Loading

dinhchinh82 commented Sep 29, 2020 •

edited

Loading

dinhchinh82 commented Sep 29, 2020 •

edited

Loading

dinhchinh82 commented Sep 29, 2020 •

edited

Loading

Koenkk commented Sep 29, 2020 •

edited

Loading

dinhchinh82 commented Sep 29, 2020 •

edited

Loading

Koenkk commented Sep 29, 2020 •

edited

Loading