Merge pull request #108 from zandrey/5.4.x+fslc

Update 5.4.x+fslc to v5.4.60
Freescale · Aug 24, 2020 · 4b0ed61 · 4b0ed61
2 parents 21c0650 + d694e02
commit 4b0ed61
Show file tree

Hide file tree

Showing 435 changed files with 3,206 additions and 1,819 deletions.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
@@ -1566,7 +1566,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
 KernelVersion:	4.3
 Contact:	[email protected]
 Description:
-		Raw (unscaled no offset etc.) percentage reading of a substance.
+		Raw (unscaled no offset etc.) reading of a substance. Units
+		after application of scale and offset are percents.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw

diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
@@ -21,7 +21,7 @@ controller state. The mux controller state is described in
 
 Example:
 	mux: mux-controller {
-		compatible = "mux-gpio";
+		compatible = "gpio-mux";
 		#mux-control-cells = <0>;
 
 		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,

diff --git a/Makefile b/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 4
-SUBLEVEL = 58
+SUBLEVEL = 60
 EXTRAVERSION =
 NAME = Kleptomaniac Octopus
 

diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -339,7 +339,7 @@
 			reg = <0x20>;
 			remote = <&vin1>;
 
-			port {
+			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -399,7 +399,7 @@
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			default-input = <0>;
 
-			port {
+			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 

diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -16,15 +16,27 @@
 		regulator-type = "voltage";
 		regulator-boot-on;
 		regulator-always-on;
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1300000>;
+		regulator-min-microvolt = <1108475>;
+		regulator-max-microvolt = <1308475>;
 		regulator-ramp-delay = <50>; /* 4ms */
 		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
 		gpios-states = <0x1>;
-		states = <1100000 0>, <1300000 1>;
+		states = <1108475 0>, <1308475 1>;
 	};
 };
 
 &cpu0 {
 	cpu-supply = <&reg_vdd_cpux>;
 };
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
@@ -22,6 +22,19 @@
  * A simple function epilogue looks like this:
  *	ldm	sp, {fp, sp, pc}
  *
+ * When compiled with clang, pc and sp are not pushed. A simple function
+ * prologue looks like this when built with clang:
+ *
+ *	stmdb	{..., fp, lr}
+ *	add	fp, sp, #x
+ *	sub	sp, sp, #y
+ *
+ * A simple function epilogue looks like this when built with clang:
+ *
+ *	sub	sp, fp, #x
+ *	ldm	{..., fp, pc}
+ *
+ *
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
@@ -34,6 +47,16 @@ int notrace unwind_frame(struct stackframe *frame)
 	low = frame->sp;
 	high = ALIGN(low, THREAD_SIZE);
 
+#ifdef CONFIG_CC_IS_CLANG
+	/* check current frame pointer is within bounds */
+	if (fp < low + 4 || fp > high - 4)
+		return -EINVAL;
+
+	frame->sp = frame->fp;
+	frame->fp = *(unsigned long *)(fp);
+	frame->pc = frame->lr;
+	frame->lr = *(unsigned long *)(fp + 4);
+#else
 	/* check current frame pointer is within bounds */
 	if (fp < low + 12 || fp > high - 4)
 		return -EINVAL;
@@ -42,6 +65,7 @@ int notrace unwind_frame(struct stackframe *frame)
 	frame->fp = *(unsigned long *)(fp - 12);
 	frame->sp = *(unsigned long *)(fp - 8);
 	frame->pc = *(unsigned long *)(fp - 4);
+#endif
 
 	return 0;
 }

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
@@ -592,26 +592,31 @@ static void __init at91_pm_sram_init(void)
 	sram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!sram_pool) {
 		pr_warn("%s: sram pool unavailable!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
 	if (!sram_base) {
 		pr_warn("%s: unable to alloc sram!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
 	at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
 					at91_pm_suspend_in_sram_sz, false);
 	if (!at91_suspend_sram_fn) {
 		pr_warn("SRAM: Could not map\n");
-		return;
+		goto out_put_device;
 	}
 
 	/* Copy the pm suspend handler to SRAM */
 	at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
+	return;
+
+out_put_device:
+	put_device(&pdev->dev);
+	return;
 }
 
 static bool __init at91_is_pm_mode_active(int pm_mode)

diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -26,6 +26,7 @@
 #define EXYNOS5420_USE_L2_COMMON_UP_STATE	BIT(30)
 
 static void __iomem *ns_sram_base_addr __ro_after_init;
+static bool secure_firmware __ro_after_init;
 
 /*
  * The common v7_exit_coherency_flush API could not be used because of the
@@ -58,15 +59,16 @@ static void __iomem *ns_sram_base_addr __ro_after_init;
 static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 {
 	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+	bool state;
 
 	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
 	if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
 		cluster >= EXYNOS5420_NR_CLUSTERS)
 		return -EINVAL;
 
-	if (!exynos_cpu_power_state(cpunr)) {
-		exynos_cpu_power_up(cpunr);
-
+	state = exynos_cpu_power_state(cpunr);
+	exynos_cpu_power_up(cpunr);
+	if (!state && secure_firmware) {
 		/*
 		 * This assumes the cluster number of the big cores(Cortex A15)
 		 * is 0 and the Little cores(Cortex A7) is 1.
@@ -258,6 +260,8 @@ static int __init exynos_mcpm_init(void)
 		return -ENOMEM;
 	}
 
+	secure_firmware = exynos_secure_firmware_available();
+
 	/*
 	 * To increase the stability of KFC reset we need to program
 	 * the PMU SPARE3 register

diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c
@@ -49,14 +49,14 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -67,7 +67,7 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!suspend_ocram_base) {
 		pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	/* Copy the code that puts DDR in self refresh to ocram */
@@ -81,6 +81,8 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!socfpga_sdram_self_refresh_in_ocram)
 		ret = -EFAULT;
 
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(np);
 

diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -157,6 +157,7 @@
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-enable-ramp-delay = <125>;
+				regulator-always-on;
 			};
 
 			ldo8_reg: LDO8 {

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -530,6 +530,17 @@
 		status = "ok";
 		compatible = "adi,adv7533";
 		reg = <0x39>;
+		adi,dsi-lanes = <4>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+			};
+			port@1 {
+				reg = <1>;
+			};
+		};
 	};
 };
 

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -516,7 +516,7 @@
 		reg = <0x39>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 2>;
-		pd-gpio = <&gpio0 4 0>;
+		pd-gpios = <&gpio0 4 0>;
 		adi,dsi-lanes = <4>;
 		#sound-dai-cells = <0>;
 

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -19,6 +19,12 @@
 	model = "Globalscale Marvell ESPRESSOBin Board";
 	compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
 
+	aliases {
+		ethernet0 = &eth0;
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};

diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -508,7 +508,7 @@
 				pins = "gpio63", "gpio64", "gpio65", "gpio66",
 				       "gpio67", "gpio68";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		cdc_pdm_lines_sus: pdm_lines_off {
@@ -537,7 +537,7 @@
 				pins = "gpio113", "gpio114", "gpio115",
 				       "gpio116";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 
@@ -565,7 +565,7 @@
 			pinconf {
 				pins = "gpio110";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 
@@ -591,7 +591,7 @@
 			pinconf {
 				pins = "gpio116";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		ext_mclk_tlmm_lines_sus: mclk_lines_off {
@@ -619,7 +619,7 @@
 				pins = "gpio112", "gpio117", "gpio118",
 					"gpio119";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		ext_sec_tlmm_lines_sus: tlmm_lines_off {

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -156,7 +156,7 @@
 	pinctrl-0 = <&rgmii_pins>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
-	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
 	tx_delay = <0x10>;
 	rx_delay = <0x10>;
 	status = "okay";

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -101,7 +101,7 @@
 
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
 		enable-active-low;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
@@ -157,7 +157,7 @@
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
 	tx_delay = <0x10>;

diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
@@ -155,7 +155,7 @@ armv8pmu_events_sysfs_show(struct device *dev,
 
 	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
 
-	return sprintf(page, "event=0x%03llx\n", pmu_attr->id);
+	return sprintf(page, "event=0x%04llx\n", pmu_attr->id);
 }
 
 #define ARMV8_EVENT_ATTR(name, config) \
@@ -303,10 +303,13 @@ armv8pmu_event_attr_is_visible(struct kobject *kobj,
 	    test_bit(pmu_attr->id, cpu_pmu->pmceid_bitmap))
 		return attr->mode;
 
-	pmu_attr->id -= ARMV8_PMUV3_EXT_COMMON_EVENT_BASE;
-	if (pmu_attr->id < ARMV8_PMUV3_MAX_COMMON_EVENTS &&
-	    test_bit(pmu_attr->id, cpu_pmu->pmceid_ext_bitmap))
-		return attr->mode;
+	if (pmu_attr->id >= ARMV8_PMUV3_EXT_COMMON_EVENT_BASE) {
+		u64 id = pmu_attr->id - ARMV8_PMUV3_EXT_COMMON_EVENT_BASE;
+
+		if (id < ARMV8_PMUV3_MAX_COMMON_EVENTS &&
+		    test_bit(id, cpu_pmu->pmceid_ext_bitmap))
+			return attr->mode;
+	}
 
 	return 0;
 }