-
Notifications
You must be signed in to change notification settings - Fork 1.3k
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Zebra is ignoring IPv6 link-local addresses on recent Linux kernels #19
Comments
This bug was introduced by a patch from Vivek, I'll ask him to look at it real quick |
Apparently this issue is a false alarm. Vivek's change to ignore IPv6 addresses with the IFA_F_DADFAILED/IFA_F_TENTATIVE flags is correct as these addresses can not be used nor bound to. I did some more testing here and the problem only happens on a very specific scenario. When you run a VirtualBox VM using a bridged network adapter based on a wlan interface, all IPv6 addresses added to this virtual adapter fail in the IPv6 DAD check (and thus zebra will correctly ignore them). The same doesn't happen if we use the bridge mode based on a wired ethernet interface. Please see the output below (enp0s3 is bridged on a wlan interface and enp0s8 is bridged on a wired ethernet interface):
Something really obscure is going on here but the problem is definitely not in zebra. And using different kernel versions doesn't change anything, just the test environment. |
My results vary on a ubuntu 16.10 VM I just installed: dsa@ubuntu-1610:~$ uname -a This interface is bridged to my Wi-Fi and pulls a dhcp address from the router (actual addresses obscured, but it is a valid address): This is using Virtual Box on a Mac running 10.12.2. |
@rwestphal ok to close this bug then? |
@donaldsharp sure. |
Add check for mpls module to more places
When zebra is running with debugs turned on there is a use after free reported by the address sanitizer: 2020/10/16 12:58:02 ZEBRA: rib_delnode: (0:254):4.5.6.16/32: rn 0x60b000026f20, re 0x6080000131a0, removing 2020/10/16 12:58:02 ZEBRA: rib_meta_queue_add: (0:254):4.5.6.16/32: queued rn 0x60b000026f20 into sub-queue 3 ================================================================= ==3101430==ERROR: AddressSanitizer: heap-use-after-free on address 0x608000011d28 at pc 0x555555705ab6 bp 0x7fffffffdab0 sp 0x7fffffffdaa8 READ of size 8 at 0x608000011d28 thread T0 #0 0x555555705ab5 in re_list_const_first zebra/rib.h:222 #1 0x555555705b54 in re_list_first zebra/rib.h:222 #2 0x555555711a4f in process_subq_route zebra/zebra_rib.c:2248 #3 0x555555711d2e in process_subq zebra/zebra_rib.c:2286 #4 0x555555711ec7 in meta_queue_process zebra/zebra_rib.c:2320 #5 0x7ffff74701f7 in work_queue_run lib/workqueue.c:291 #6 0x7ffff7450e9c in thread_call lib/thread.c:1581 #7 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 #8 0x55555561a578 in main zebra/main.c:455 #9 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 #10 0x5555555e3429 in _start (/usr/lib/frr/zebra+0x8f429) 0x608000011d28 is located 8 bytes inside of 88-byte region [0x608000011d20,0x608000011d78) freed by thread T0 here: #0 0x7ffff768bb6f in __interceptor_free (/lib/x86_64-linux-gnu/libasan.so.6+0xa9b6f) #1 0x7ffff739ccad in qfree lib/memory.c:129 #2 0x555555709ee4 in rib_gc_dest zebra/zebra_rib.c:746 #3 0x55555570ca76 in rib_process zebra/zebra_rib.c:1240 #4 0x555555711a05 in process_subq_route zebra/zebra_rib.c:2245 #5 0x555555711d2e in process_subq zebra/zebra_rib.c:2286 #6 0x555555711ec7 in meta_queue_process zebra/zebra_rib.c:2320 #7 0x7ffff74701f7 in work_queue_run lib/workqueue.c:291 #8 0x7ffff7450e9c in thread_call lib/thread.c:1581 #9 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 #10 0x55555561a578 in main zebra/main.c:455 #11 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 previously allocated by thread T0 here: #0 0x7ffff768c037 in calloc (/lib/x86_64-linux-gnu/libasan.so.6+0xaa037) #1 0x7ffff739cb98 in qcalloc lib/memory.c:110 #2 0x555555712ace in zebra_rib_create_dest zebra/zebra_rib.c:2515 #3 0x555555712c6c in rib_link zebra/zebra_rib.c:2576 #4 0x555555712faa in rib_addnode zebra/zebra_rib.c:2607 #5 0x555555715bf0 in rib_add_multipath_nhe zebra/zebra_rib.c:3012 #6 0x555555715f56 in rib_add_multipath zebra/zebra_rib.c:3049 #7 0x55555571788b in rib_add zebra/zebra_rib.c:3327 #8 0x5555555e584a in connected_up zebra/connected.c:254 #9 0x5555555e42ff in connected_announce zebra/connected.c:94 #10 0x5555555e4fd3 in connected_update zebra/connected.c:195 #11 0x5555555e61ad in connected_add_ipv4 zebra/connected.c:340 #12 0x5555555f26f5 in netlink_interface_addr zebra/if_netlink.c:1213 #13 0x55555560f756 in netlink_information_fetch zebra/kernel_netlink.c:350 #14 0x555555612e49 in netlink_parse_info zebra/kernel_netlink.c:941 #15 0x55555560f9f1 in kernel_read zebra/kernel_netlink.c:402 #16 0x7ffff7450e9c in thread_call lib/thread.c:1581 #17 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 #18 0x55555561a578 in main zebra/main.c:455 #19 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: heap-use-after-free zebra/rib.h:222 in re_list_const_first This is happening because we are using the dest pointer after a call into rib_gc_dest. In process_subq_route, we call rib_process() and if the dest is deleted dest pointer is now garbage. We must reload the dest pointer in this case. Signed-off-by: Donald Sharp <[email protected]>
When zebra is running with debugs turned on there is a use after free reported by the address sanitizer: 2020/10/16 12:58:02 ZEBRA: rib_delnode: (0:254):4.5.6.16/32: rn 0x60b000026f20, re 0x6080000131a0, removing 2020/10/16 12:58:02 ZEBRA: rib_meta_queue_add: (0:254):4.5.6.16/32: queued rn 0x60b000026f20 into sub-queue 3 ================================================================= ==3101430==ERROR: AddressSanitizer: heap-use-after-free on address 0x608000011d28 at pc 0x555555705ab6 bp 0x7fffffffdab0 sp 0x7fffffffdaa8 READ of size 8 at 0x608000011d28 thread T0 #0 0x555555705ab5 in re_list_const_first zebra/rib.h:222 #1 0x555555705b54 in re_list_first zebra/rib.h:222 #2 0x555555711a4f in process_subq_route zebra/zebra_rib.c:2248 #3 0x555555711d2e in process_subq zebra/zebra_rib.c:2286 #4 0x555555711ec7 in meta_queue_process zebra/zebra_rib.c:2320 #5 0x7ffff74701f7 in work_queue_run lib/workqueue.c:291 #6 0x7ffff7450e9c in thread_call lib/thread.c:1581 #7 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 #8 0x55555561a578 in main zebra/main.c:455 #9 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 #10 0x5555555e3429 in _start (/usr/lib/frr/zebra+0x8f429) 0x608000011d28 is located 8 bytes inside of 88-byte region [0x608000011d20,0x608000011d78) freed by thread T0 here: #0 0x7ffff768bb6f in __interceptor_free (/lib/x86_64-linux-gnu/libasan.so.6+0xa9b6f) #1 0x7ffff739ccad in qfree lib/memory.c:129 #2 0x555555709ee4 in rib_gc_dest zebra/zebra_rib.c:746 #3 0x55555570ca76 in rib_process zebra/zebra_rib.c:1240 #4 0x555555711a05 in process_subq_route zebra/zebra_rib.c:2245 #5 0x555555711d2e in process_subq zebra/zebra_rib.c:2286 #6 0x555555711ec7 in meta_queue_process zebra/zebra_rib.c:2320 #7 0x7ffff74701f7 in work_queue_run lib/workqueue.c:291 #8 0x7ffff7450e9c in thread_call lib/thread.c:1581 #9 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 #10 0x55555561a578 in main zebra/main.c:455 #11 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 previously allocated by thread T0 here: #0 0x7ffff768c037 in calloc (/lib/x86_64-linux-gnu/libasan.so.6+0xaa037) #1 0x7ffff739cb98 in qcalloc lib/memory.c:110 #2 0x555555712ace in zebra_rib_create_dest zebra/zebra_rib.c:2515 #3 0x555555712c6c in rib_link zebra/zebra_rib.c:2576 #4 0x555555712faa in rib_addnode zebra/zebra_rib.c:2607 #5 0x555555715bf0 in rib_add_multipath_nhe zebra/zebra_rib.c:3012 #6 0x555555715f56 in rib_add_multipath zebra/zebra_rib.c:3049 #7 0x55555571788b in rib_add zebra/zebra_rib.c:3327 #8 0x5555555e584a in connected_up zebra/connected.c:254 #9 0x5555555e42ff in connected_announce zebra/connected.c:94 #10 0x5555555e4fd3 in connected_update zebra/connected.c:195 #11 0x5555555e61ad in connected_add_ipv4 zebra/connected.c:340 #12 0x5555555f26f5 in netlink_interface_addr zebra/if_netlink.c:1213 #13 0x55555560f756 in netlink_information_fetch zebra/kernel_netlink.c:350 #14 0x555555612e49 in netlink_parse_info zebra/kernel_netlink.c:941 #15 0x55555560f9f1 in kernel_read zebra/kernel_netlink.c:402 #16 0x7ffff7450e9c in thread_call lib/thread.c:1581 #17 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 #18 0x55555561a578 in main zebra/main.c:455 #19 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: heap-use-after-free zebra/rib.h:222 in re_list_const_first This is happening because we are using the dest pointer after a call into rib_gc_dest. In process_subq_route, we call rib_process() and if the dest is deleted dest pointer is now garbage. We must reload the dest pointer in this case. Signed-off-by: Donald Sharp <[email protected]>
When zebra is running with debugs turned on there is a use after free reported by the address sanitizer: 2020/10/16 12:58:02 ZEBRA: rib_delnode: (0:254):4.5.6.16/32: rn 0x60b000026f20, re 0x6080000131a0, removing 2020/10/16 12:58:02 ZEBRA: rib_meta_queue_add: (0:254):4.5.6.16/32: queued rn 0x60b000026f20 into sub-queue 3 ================================================================= ==3101430==ERROR: AddressSanitizer: heap-use-after-free on address 0x608000011d28 at pc 0x555555705ab6 bp 0x7fffffffdab0 sp 0x7fffffffdaa8 READ of size 8 at 0x608000011d28 thread T0 #0 0x555555705ab5 in re_list_const_first zebra/rib.h:222 FRRouting#1 0x555555705b54 in re_list_first zebra/rib.h:222 FRRouting#2 0x555555711a4f in process_subq_route zebra/zebra_rib.c:2248 FRRouting#3 0x555555711d2e in process_subq zebra/zebra_rib.c:2286 FRRouting#4 0x555555711ec7 in meta_queue_process zebra/zebra_rib.c:2320 FRRouting#5 0x7ffff74701f7 in work_queue_run lib/workqueue.c:291 FRRouting#6 0x7ffff7450e9c in thread_call lib/thread.c:1581 FRRouting#7 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 FRRouting#8 0x55555561a578 in main zebra/main.c:455 FRRouting#9 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 FRRouting#10 0x5555555e3429 in _start (/usr/lib/frr/zebra+0x8f429) 0x608000011d28 is located 8 bytes inside of 88-byte region [0x608000011d20,0x608000011d78) freed by thread T0 here: #0 0x7ffff768bb6f in __interceptor_free (/lib/x86_64-linux-gnu/libasan.so.6+0xa9b6f) FRRouting#1 0x7ffff739ccad in qfree lib/memory.c:129 FRRouting#2 0x555555709ee4 in rib_gc_dest zebra/zebra_rib.c:746 FRRouting#3 0x55555570ca76 in rib_process zebra/zebra_rib.c:1240 FRRouting#4 0x555555711a05 in process_subq_route zebra/zebra_rib.c:2245 FRRouting#5 0x555555711d2e in process_subq zebra/zebra_rib.c:2286 FRRouting#6 0x555555711ec7 in meta_queue_process zebra/zebra_rib.c:2320 FRRouting#7 0x7ffff74701f7 in work_queue_run lib/workqueue.c:291 FRRouting#8 0x7ffff7450e9c in thread_call lib/thread.c:1581 FRRouting#9 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 FRRouting#10 0x55555561a578 in main zebra/main.c:455 FRRouting#11 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 previously allocated by thread T0 here: #0 0x7ffff768c037 in calloc (/lib/x86_64-linux-gnu/libasan.so.6+0xaa037) FRRouting#1 0x7ffff739cb98 in qcalloc lib/memory.c:110 FRRouting#2 0x555555712ace in zebra_rib_create_dest zebra/zebra_rib.c:2515 FRRouting#3 0x555555712c6c in rib_link zebra/zebra_rib.c:2576 FRRouting#4 0x555555712faa in rib_addnode zebra/zebra_rib.c:2607 FRRouting#5 0x555555715bf0 in rib_add_multipath_nhe zebra/zebra_rib.c:3012 FRRouting#6 0x555555715f56 in rib_add_multipath zebra/zebra_rib.c:3049 FRRouting#7 0x55555571788b in rib_add zebra/zebra_rib.c:3327 FRRouting#8 0x5555555e584a in connected_up zebra/connected.c:254 FRRouting#9 0x5555555e42ff in connected_announce zebra/connected.c:94 FRRouting#10 0x5555555e4fd3 in connected_update zebra/connected.c:195 FRRouting#11 0x5555555e61ad in connected_add_ipv4 zebra/connected.c:340 FRRouting#12 0x5555555f26f5 in netlink_interface_addr zebra/if_netlink.c:1213 FRRouting#13 0x55555560f756 in netlink_information_fetch zebra/kernel_netlink.c:350 FRRouting#14 0x555555612e49 in netlink_parse_info zebra/kernel_netlink.c:941 FRRouting#15 0x55555560f9f1 in kernel_read zebra/kernel_netlink.c:402 FRRouting#16 0x7ffff7450e9c in thread_call lib/thread.c:1581 FRRouting#17 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 FRRouting#18 0x55555561a578 in main zebra/main.c:455 FRRouting#19 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: heap-use-after-free zebra/rib.h:222 in re_list_const_first This is happening because we are using the dest pointer after a call into rib_gc_dest. In process_subq_route, we call rib_process() and if the dest is deleted dest pointer is now garbage. We must reload the dest pointer in this case. Signed-off-by: Donald Sharp <[email protected]>
Temporal fix Thread 2.1 "bgpd" received signal SIGSEGV, Segmentation fault. 0x00007ffff7b14180 in route_top (table=0x0) at lib/table.c:401 401 if (table->top == NULL) (gdb) bt \#0 0x00007ffff7b14180 in route_top (table=0x0) at lib/table.c:401 \#1 0x0000555555657286 in bgp_table_top (table=0x55555629c440) at ./bgpd/bgp_table.h:203 \#2 0x0000555555666dd0 in bgp_soft_reconfig_table_flag (srta=0x55555bc68fd0, flag=false) at bgpd/bgp_route.c:4669 \#3 0x0000555555666f5e in bgp_soft_reconfig_table_thread_cancel (nsrta=0x0, bgp=0x5555562767a0) at bgpd/bgp_route.c:4698 \FRRouting#4 0x00005555556e9463 in bgp_delete (bgp=0x5555562767a0) at bgpd/bgpd.c:3482 \FRRouting#5 0x00005555556f9ae5 in bgp_router_destroy (args=0x7fffffff6b90) at bgpd/bgp_nb_config.c:176 \FRRouting#6 0x00007ffff7ad985d in nb_callback_destroy (context=0x7fffffff7180, nb_node=0x555555c0c580, event=NB_EV_APPLY, dnode=0x5555563cdbf0, errmsg=0x7fffffff7190 "", errmsg_len=8192) at lib/northbound.c:970 \FRRouting#7 0x00007ffff7ada17a in nb_callback_configuration (context=0x7fffffff7180, event=NB_EV_APPLY, change=0x55555d5aa560, errmsg=0x7fffffff7190 "", errmsg_len=8192) at lib/northbound.c:1195 \FRRouting#8 0x00007ffff7ada564 in nb_transaction_process (event=NB_EV_APPLY, transaction=0x55556a6ed510, errmsg=0x7fffffff7190 "", errmsg_len=8192) at lib/northbound.c:1312 \FRRouting#9 0x00007ffff7ad900b in nb_candidate_commit_apply (transaction=0x55556a6ed510, save_transaction=true, transaction_id=0x0, errmsg=0x7fffffff7190 "", errmsg_len=8192) at lib/northbound.c:745 \FRRouting#10 0x00007ffff7ad912e in nb_candidate_commit (context=0x7fffffff7180, candidate=0x555555bddd00, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7fffffff7190 "", errmsg_len=8192) at lib/northbound.c:777 \FRRouting#11 0x00007ffff7ae0249 in nb_cli_classic_commit (vty=0x555557b62790) at lib/northbound_cli.c:64 \FRRouting#12 0x00007ffff7ae0cce in nb_cli_apply_changes (vty=0x555557b62790, xpath_base_fmt=0x7fffffffb730 "/frr-routing:routing/control-plane-protocols/control-plane-protocol[type='frr-bgp:bgp'][name='bgp'][vrf='default']/frr-bgp:bgp") at lib/northbound_cli.c:281 \FRRouting#13 0x00005555556a01e6 in no_router_bgp (self=0x555555a28140 <no_router_bgp_cmd>, vty=0x555557b62790, argc=3, argv=0x555560be1bd0) at bgpd/bgp_vty.c:1466 \FRRouting#14 0x00007ffff7a90ebc in cmd_execute_command_real (vline=0x55556635c140, filter=FILTER_RELAXED, vty=0x555557b62790, cmd=0x0) at lib/command.c:938 \FRRouting#15 0x00007ffff7a91031 in cmd_execute_command (vline=0x55556635c140, vty=0x555557b62790, cmd=0x0, vtysh=0) at lib/command.c:997 \FRRouting#16 0x00007ffff7a91586 in cmd_execute (vty=0x555557b62790, cmd=0x555557b68f20 "no router bgp", matched=0x0, vtysh=0) at lib/command.c:1162 \FRRouting#17 0x00007ffff7b228f9 in vty_command (vty=0x555557b62790, buf=0x555557b68f20 "no router bgp") at lib/vty.c:517 \FRRouting#18 0x00007ffff7b2465b in vty_execute (vty=0x555557b62790) at lib/vty.c:1282 \FRRouting#19 0x00007ffff7b2656e in vtysh_read (thread=0x7fffffffe2e0) at lib/vty.c:2120 \FRRouting#20 0x00007ffff7b1bd23 in thread_call (thread=0x7fffffffe2e0) at lib/thread.c:1681 \FRRouting#21 0x00007ffff7ac7fc2 in frr_run (master=0x555555a6aab0) at lib/libfrr.c:1110 \FRRouting#22 0x00005555555d88b2 in main (argc=4, argv=0x7fffffffe518) at bgpd/bgp_main.c:523 Signed-off-by: Louis Scalbert <[email protected]>
When zebra is running with debugs turned on there is a use after free reported by the address sanitizer: 2020/10/16 12:58:02 ZEBRA: rib_delnode: (0:254):4.5.6.16/32: rn 0x60b000026f20, re 0x6080000131a0, removing 2020/10/16 12:58:02 ZEBRA: rib_meta_queue_add: (0:254):4.5.6.16/32: queued rn 0x60b000026f20 into sub-queue 3 ================================================================= ==3101430==ERROR: AddressSanitizer: heap-use-after-free on address 0x608000011d28 at pc 0x555555705ab6 bp 0x7fffffffdab0 sp 0x7fffffffdaa8 READ of size 8 at 0x608000011d28 thread T0 #0 0x555555705ab5 in re_list_const_first zebra/rib.h:222 #1 0x555555705b54 in re_list_first zebra/rib.h:222 #2 0x555555711a4f in process_subq_route zebra/zebra_rib.c:2248 FRRouting#3 0x555555711d2e in process_subq zebra/zebra_rib.c:2286 FRRouting#4 0x555555711ec7 in meta_queue_process zebra/zebra_rib.c:2320 FRRouting#5 0x7ffff74701f7 in work_queue_run lib/workqueue.c:291 FRRouting#6 0x7ffff7450e9c in thread_call lib/thread.c:1581 FRRouting#7 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 FRRouting#8 0x55555561a578 in main zebra/main.c:455 FRRouting#9 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 FRRouting#10 0x5555555e3429 in _start (/usr/lib/frr/zebra+0x8f429) 0x608000011d28 is located 8 bytes inside of 88-byte region [0x608000011d20,0x608000011d78) freed by thread T0 here: #0 0x7ffff768bb6f in __interceptor_free (/lib/x86_64-linux-gnu/libasan.so.6+0xa9b6f) #1 0x7ffff739ccad in qfree lib/memory.c:129 #2 0x555555709ee4 in rib_gc_dest zebra/zebra_rib.c:746 FRRouting#3 0x55555570ca76 in rib_process zebra/zebra_rib.c:1240 FRRouting#4 0x555555711a05 in process_subq_route zebra/zebra_rib.c:2245 FRRouting#5 0x555555711d2e in process_subq zebra/zebra_rib.c:2286 FRRouting#6 0x555555711ec7 in meta_queue_process zebra/zebra_rib.c:2320 FRRouting#7 0x7ffff74701f7 in work_queue_run lib/workqueue.c:291 FRRouting#8 0x7ffff7450e9c in thread_call lib/thread.c:1581 FRRouting#9 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 FRRouting#10 0x55555561a578 in main zebra/main.c:455 FRRouting#11 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 previously allocated by thread T0 here: #0 0x7ffff768c037 in calloc (/lib/x86_64-linux-gnu/libasan.so.6+0xaa037) #1 0x7ffff739cb98 in qcalloc lib/memory.c:110 #2 0x555555712ace in zebra_rib_create_dest zebra/zebra_rib.c:2515 FRRouting#3 0x555555712c6c in rib_link zebra/zebra_rib.c:2576 FRRouting#4 0x555555712faa in rib_addnode zebra/zebra_rib.c:2607 FRRouting#5 0x555555715bf0 in rib_add_multipath_nhe zebra/zebra_rib.c:3012 FRRouting#6 0x555555715f56 in rib_add_multipath zebra/zebra_rib.c:3049 FRRouting#7 0x55555571788b in rib_add zebra/zebra_rib.c:3327 FRRouting#8 0x5555555e584a in connected_up zebra/connected.c:254 FRRouting#9 0x5555555e42ff in connected_announce zebra/connected.c:94 FRRouting#10 0x5555555e4fd3 in connected_update zebra/connected.c:195 FRRouting#11 0x5555555e61ad in connected_add_ipv4 zebra/connected.c:340 FRRouting#12 0x5555555f26f5 in netlink_interface_addr zebra/if_netlink.c:1213 FRRouting#13 0x55555560f756 in netlink_information_fetch zebra/kernel_netlink.c:350 FRRouting#14 0x555555612e49 in netlink_parse_info zebra/kernel_netlink.c:941 FRRouting#15 0x55555560f9f1 in kernel_read zebra/kernel_netlink.c:402 FRRouting#16 0x7ffff7450e9c in thread_call lib/thread.c:1581 FRRouting#17 0x7ffff738eaf7 in frr_run lib/libfrr.c:1099 FRRouting#18 0x55555561a578 in main zebra/main.c:455 FRRouting#19 0x7ffff7079cc9 in __libc_start_main ../csu/libc-start.c:308 SUMMARY: AddressSanitizer: heap-use-after-free zebra/rib.h:222 in re_list_const_first This is happening because we are using the dest pointer after a call into rib_gc_dest. In process_subq_route, we call rib_process() and if the dest is deleted dest pointer is now garbage. We must reload the dest pointer in this case. Signed-off-by: Donald Sharp <[email protected]>
ASAN reported the following memleak: ``` Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x4d4342 in calloc (/usr/lib/frr/bgpd+0x4d4342) FRRouting#1 0xbc3d68 in qcalloc /home/sharpd/frr8/lib/memory.c:116:27 FRRouting#2 0xb869f7 in list_new /home/sharpd/frr8/lib/linklist.c:64:9 FRRouting#3 0x5a38bc in bgp_evpn_remote_ip_hash_alloc /home/sharpd/frr8/bgpd/bgp_evpn.c:6789:24 FRRouting#4 0xb358d3 in hash_get /home/sharpd/frr8/lib/hash.c:162:13 FRRouting#5 0x593d39 in bgp_evpn_remote_ip_hash_add /home/sharpd/frr8/bgpd/bgp_evpn.c:6881:7 FRRouting#6 0x59dbbd in install_evpn_route_entry_in_vni_common /home/sharpd/frr8/bgpd/bgp_evpn.c:3049:2 FRRouting#7 0x59cfe0 in install_evpn_route_entry_in_vni_ip /home/sharpd/frr8/bgpd/bgp_evpn.c:3126:8 FRRouting#8 0x59c6f0 in install_evpn_route_entry /home/sharpd/frr8/bgpd/bgp_evpn.c:3318:8 FRRouting#9 0x59bb52 in install_uninstall_route_in_vnis /home/sharpd/frr8/bgpd/bgp_evpn.c:3888:10 FRRouting#10 0x59b6d2 in bgp_evpn_install_uninstall_table /home/sharpd/frr8/bgpd/bgp_evpn.c:4019:5 FRRouting#11 0x578857 in install_uninstall_evpn_route /home/sharpd/frr8/bgpd/bgp_evpn.c:4051:9 FRRouting#12 0x58ada6 in bgp_evpn_import_route /home/sharpd/frr8/bgpd/bgp_evpn.c:6049:9 FRRouting#13 0x713794 in bgp_update /home/sharpd/frr8/bgpd/bgp_route.c:4842:3 FRRouting#14 0x583fa0 in process_type2_route /home/sharpd/frr8/bgpd/bgp_evpn.c:4518:9 FRRouting#15 0x5824ba in bgp_nlri_parse_evpn /home/sharpd/frr8/bgpd/bgp_evpn.c:5732:8 FRRouting#16 0x6ae6a2 in bgp_nlri_parse /home/sharpd/frr8/bgpd/bgp_packet.c:363:10 FRRouting#17 0x6be6fa in bgp_update_receive /home/sharpd/frr8/bgpd/bgp_packet.c:2020:15 FRRouting#18 0x6b7433 in bgp_process_packet /home/sharpd/frr8/bgpd/bgp_packet.c:2929:11 FRRouting#19 0xd00146 in thread_call /home/sharpd/frr8/lib/thread.c:2006:2 ``` The list itself was not being cleaned up when the final list entry was removed, so make sure we do that instead of leaking memory. Signed-off-by: Trey Aspelund <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following causes a isisd crash. > # cat config > affinity-map green bit-position 0 > router isis 1 > flex-algo 129 > affinity exclude-any green > # vtysh -f config > #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#1 0x00007f650cd32756 in core_handler (signo=6, siginfo=0x7ffc56f93070, context=0x7ffc56f92f40) at lib/sigevent.c:258 > FRRouting#2 <signal handler called> > FRRouting#3 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#4 0x00007f650c91c537 in __GI_abort () at abort.c:79 > FRRouting#5 0x00007f650cd007c9 in nb_running_get_entry_worker (dnode=0x0, xpath=0x0, abort_if_not_found=true, rec_search=true) at lib/northbound.c:2531 > FRRouting#6 0x00007f650cd007f9 in nb_running_get_entry (dnode=0x55d9ad406e00, xpath=0x0, abort_if_not_found=true) at lib/northbound.c:2537 > FRRouting#7 0x000055d9ab302248 in isis_instance_flex_algo_affinity_set (args=0x7ffc56f947a0, type=2) at isisd/isis_nb_config.c:2998 > FRRouting#8 0x000055d9ab3027c0 in isis_instance_flex_algo_affinity_exclude_any_create (args=0x7ffc56f947a0) at isisd/isis_nb_config.c:3155 > FRRouting#9 0x00007f650ccfe284 in nb_callback_create (context=0x7ffc56f94d20, nb_node=0x55d9ad28b540, event=NB_EV_VALIDATE, dnode=0x55d9ad406e00, resource=0x0, errmsg=0x7ffc56f94de0 "", > errmsg_len=8192) at lib/northbound.c:1487 > FRRouting#10 0x00007f650ccff067 in nb_callback_configuration (context=0x7ffc56f94d20, event=NB_EV_VALIDATE, change=0x55d9ad406d40, errmsg=0x7ffc56f94de0 "", errmsg_len=8192) at lib/northbound.c:1884 > FRRouting#11 0x00007f650ccfda31 in nb_candidate_validate_code (context=0x7ffc56f94d20, candidate=0x55d9ad20d710, changes=0x7ffc56f94d38, errmsg=0x7ffc56f94de0 "", errmsg_len=8192) > at lib/northbound.c:1246 > FRRouting#12 0x00007f650ccfdc67 in nb_candidate_commit_prepare (context=..., candidate=0x55d9ad20d710, comment=0x0, transaction=0x7ffc56f94da0, skip_validate=false, ignore_zero_change=false, > errmsg=0x7ffc56f94de0 "", errmsg_len=8192) at lib/northbound.c:1317 > FRRouting#13 0x00007f650ccfdec4 in nb_candidate_commit (context=..., candidate=0x55d9ad20d710, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7ffc56f94de0 "", errmsg_len=8192) > at lib/northbound.c:1381 > FRRouting#14 0x00007f650cd045ba in nb_cli_classic_commit (vty=0x55d9ad3f7490) at lib/northbound_cli.c:57 > FRRouting#15 0x00007f650cd04749 in nb_cli_pending_commit_check (vty=0x55d9ad3f7490) at lib/northbound_cli.c:96 > FRRouting#16 0x00007f650cc94340 in cmd_execute_command_real (vline=0x55d9ad3eea10, vty=0x55d9ad3f7490, cmd=0x0, up_level=0) at lib/command.c:1000 > FRRouting#17 0x00007f650cc94599 in cmd_execute_command (vline=0x55d9ad3eea10, vty=0x55d9ad3f7490, cmd=0x0, vtysh=0) at lib/command.c:1080 > FRRouting#18 0x00007f650cc94a0c in cmd_execute (vty=0x55d9ad3f7490, cmd=0x55d9ad401d30 "XFRR_end_configuration", matched=0x0, vtysh=0) at lib/command.c:1228 > FRRouting#19 0x00007f650cd523a4 in vty_command (vty=0x55d9ad3f7490, buf=0x55d9ad401d30 "XFRR_end_configuration") at lib/vty.c:625 > FRRouting#20 0x00007f650cd5413d in vty_execute (vty=0x55d9ad3f7490) at lib/vty.c:1388 > FRRouting#21 0x00007f650cd56353 in vtysh_read (thread=0x7ffc56f99370) at lib/vty.c:2400 > FRRouting#22 0x00007f650cd4b6fd in event_call (thread=0x7ffc56f99370) at lib/event.c:1996 > FRRouting#23 0x00007f650ccd1365 in frr_run (master=0x55d9ad103cf0) at lib/libfrr.c:1231 > FRRouting#24 0x000055d9ab29036e in main (argc=2, argv=0x7ffc56f99598, envp=0x7ffc56f995b0) at isisd/isis_main.c:354 Configuring the same in vtysh configure interactive mode works properly. When using "vtysh -f", the northbound compatible configuration is committed together whereas, in interactive mode, it committed line by line. In the first situation, in validation state nb_running_get_entry() fails because the area not yet in running. Do not use nb_running_get_entry() northbound validation state. Fixes: 893882e ("isisd: add isis flex-algo configuration backend") Signed-off-by: Louis Scalbert <[email protected]>
Level 2 adjacency list is not supposed to be always set. > #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#1 0x00007f9f0353274f in core_handler (signo=6, siginfo=0x7ffe95260770, context=0x7ffe95260640) at lib/sigevent.c:258 > FRRouting#2 <signal handler called> > FRRouting#3 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#4 0x00007f9f0324e537 in __GI_abort () at abort.c:79 > FRRouting#5 0x00007f9f035744ea in _zlog_assert_failed (xref=0x7f9f0362c6c0 <_xref.15>, extra=0x0) at lib/zlog.c:789 > FRRouting#6 0x00007f9f034d25ee in listnode_head (list=0x0) at lib/linklist.c:316 > FRRouting#7 0x000055cd65aaa481 in lib_interface_state_isis_adjacencies_adjacency_get_next (args=0x7ffe95261730) at isisd/isis_nb_state.c:101 > FRRouting#8 0x00007f9f034feadd in nb_callback_get_next (nb_node=0x55cd673c0190, parent_list_entry=0x55cd67570d30, list_entry=0x55cd6758f8a0) at lib/northbound.c:1748 > FRRouting#9 0x00007f9f0350bf07 in __walk (ys=0x55cd675782b0, is_resume=false) at lib/northbound_oper.c:1264 > FRRouting#10 0x00007f9f0350deaa in nb_op_walk_start (ys=0x55cd675782b0) at lib/northbound_oper.c:1741 > FRRouting#11 0x00007f9f0350e079 in nb_oper_iterate_legacy (xpath=0x55cd67595c60 "/frr-interface:lib", translator=0x0, flags=0, cb=0x0, cb_arg=0x0, tree=0x7ffe952621b0) at lib/northbound_oper.c:1803 > FRRouting#12 0x00007f9f03507661 in show_yang_operational_data_magic (self=0x7f9f03634a80 <show_yang_operational_data_cmd>, vty=0x55cd675a61f0, argc=4, argv=0x55cd6758eab0, > xpath=0x55cd67595c60 "/frr-interface:lib", json=0x0, xml=0x0, translator_family=0x0, with_config=0x0) at lib/northbound_cli.c:1576 > FRRouting#13 0x00007f9f035037f0 in show_yang_operational_data (self=0x7f9f03634a80 <show_yang_operational_data_cmd>, vty=0x55cd675a61f0, argc=4, argv=0x55cd6758eab0) > at ./lib/northbound_cli_clippy.c:906 > FRRouting#14 0x00007f9f0349435d in cmd_execute_command_real (vline=0x55cd6758e490, vty=0x55cd675a61f0, cmd=0x0, up_level=0) at lib/command.c:1003 > FRRouting#15 0x00007f9f03494477 in cmd_execute_command (vline=0x55cd67585340, vty=0x55cd675a61f0, cmd=0x0, vtysh=0) at lib/command.c:1053 > FRRouting#16 0x00007f9f03494a0c in cmd_execute (vty=0x55cd675a61f0, cmd=0x55cd67579040 "do show yang operational-data /frr-interface:lib", matched=0x0, vtysh=0) at lib/command.c:1228 > FRRouting#17 0x00007f9f0355239d in vty_command (vty=0x55cd675a61f0, buf=0x55cd67579040 "do show yang operational-data /frr-interface:lib") at lib/vty.c:625 > FRRouting#18 0x00007f9f03554136 in vty_execute (vty=0x55cd675a61f0) at lib/vty.c:1388 > FRRouting#19 0x00007f9f0355634c in vtysh_read (thread=0x7ffe952647a0) at lib/vty.c:2400 > FRRouting#20 0x00007f9f0354b6f6 in event_call (thread=0x7ffe952647a0) at lib/event.c:1996 > FRRouting#21 0x00007f9f034d1365 in frr_run (master=0x55cd67204da0) at lib/libfrr.c:1231 > FRRouting#22 0x000055cd65a3236e in main (argc=7, argv=0x7ffe952649c8, envp=0x7ffe95264a08) at isisd/isis_main.c:354 Fixes: 2a1c520 ("isisd: split northbound callbacks into multiple files") Signed-off-by: Louis Scalbert <[email protected]>
Fix a crash when modifying a route-map with set as-path exclude without as-path-access-list: > router(config)# route-map routemaptest deny 1 > router(config-route-map)# set as-path exclude 33 34 35 > router(config-route-map)# set as-path exclude as-path-access-list test > #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#1 0x00007fb3959327de in core_handler (signo=11, siginfo=0x7ffd122da530, context=0x7ffd122da400) at lib/sigevent.c:258 > FRRouting#2 <signal handler called> > FRRouting#3 0x000055ab2762a1bd in as_list_list_del (h=0x55ab27897680 <as_exclude_list_orphan>, item=0x55ab28204e20) at ./bgpd/bgp_aspath.h:77 > FRRouting#4 0x000055ab2762d1a8 in as_exclude_remove_orphan (ase=0x55ab28204e20) at bgpd/bgp_aspath.c:1574 > FRRouting#5 0x000055ab27550538 in route_aspath_exclude_free (rule=0x55ab28204e20) at bgpd/bgp_routemap.c:2366 > FRRouting#6 0x00007fb39591f00c in route_map_rule_delete (list=0x55ab28203498, rule=0x55ab28204170) at lib/routemap.c:1357 > FRRouting#7 0x00007fb39591f87c in route_map_add_set (index=0x55ab28203460, set_name=0x55ab276ad2aa "as-path exclude", set_arg=0x55ab281e4f70 "as-path-access-list test") at lib/routemap.c:1674 > FRRouting#8 0x00007fb39591d3f3 in generic_set_add (index=0x55ab28203460, command=0x55ab276ad2aa "as-path exclude", arg=0x55ab281e4f70 "as-path-access-list test", errmsg=0x7ffd122db870 "", > errmsg_len=8192) at lib/routemap.c:533 > FRRouting#9 0x000055ab2755e78e in lib_route_map_entry_set_action_rmap_set_action_exclude_as_path_modify (args=0x7ffd122db290) at bgpd/bgp_routemap_nb_config.c:2427 > FRRouting#10 0x00007fb3958fe417 in nb_callback_modify (context=0x55ab28205aa0, nb_node=0x55ab27cb31e0, event=NB_EV_APPLY, dnode=0x55ab28202690, resource=0x55ab27c32148, errmsg=0x7ffd122db870 "", > errmsg_len=8192) at lib/northbound.c:1538 > FRRouting#11 0x00007fb3958ff0ab in nb_callback_configuration (context=0x55ab28205aa0, event=NB_EV_APPLY, change=0x55ab27c32110, errmsg=0x7ffd122db870 "", errmsg_len=8192) at lib/northbound.c:1888 > FRRouting#12 0x00007fb3958ff5e4 in nb_transaction_process (event=NB_EV_APPLY, transaction=0x55ab28205aa0, errmsg=0x7ffd122db870 "", errmsg_len=8192) at lib/northbound.c:2016 > FRRouting#13 0x00007fb3958fddba in nb_candidate_commit_apply (transaction=0x55ab28205aa0, save_transaction=true, transaction_id=0x0, errmsg=0x7ffd122db870 "", errmsg_len=8192) > at lib/northbound.c:1356 > FRRouting#14 0x00007fb3958fdef0 in nb_candidate_commit (context=..., candidate=0x55ab27c2c9a0, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7ffd122db870 "", errmsg_len=8192) > at lib/northbound.c:1389 > FRRouting#15 0x00007fb3959045ba in nb_cli_classic_commit (vty=0x55ab281f6680) at lib/northbound_cli.c:57 > FRRouting#16 0x00007fb395904b5a in nb_cli_apply_changes_internal (vty=0x55ab281f6680, xpath_base=0x7ffd122dfd10 "/frr-route-map:lib/route-map[name='routemaptest']/entry[sequence='1']", > clear_pending=false) at lib/northbound_cli.c:184 > FRRouting#17 0x00007fb395904ebf in nb_cli_apply_changes (vty=0x55ab281f6680, xpath_base_fmt=0x0) at lib/northbound_cli.c:240 > --Type <RET> for more, q to quit, c to continue without paging-- > FRRouting#18 0x000055ab27557d2e in set_aspath_exclude_access_list_magic (self=0x55ab2775c300 <set_aspath_exclude_access_list_cmd>, vty=0x55ab281f6680, argc=5, argv=0x55ab28204c80, > as_path_filter_name=0x55ab28202040 "test") at bgpd/bgp_routemap.c:6397 > FRRouting#19 0x000055ab2754bdea in set_aspath_exclude_access_list (self=0x55ab2775c300 <set_aspath_exclude_access_list_cmd>, vty=0x55ab281f6680, argc=5, argv=0x55ab28204c80) > at ./bgpd/bgp_routemap_clippy.c:856 > FRRouting#20 0x00007fb39589435d in cmd_execute_command_real (vline=0x55ab281e61f0, vty=0x55ab281f6680, cmd=0x0, up_level=0) at lib/command.c:1003 > FRRouting#21 0x00007fb3958944be in cmd_execute_command (vline=0x55ab281e61f0, vty=0x55ab281f6680, cmd=0x0, vtysh=0) at lib/command.c:1062 > FRRouting#22 0x00007fb395894a0c in cmd_execute (vty=0x55ab281f6680, cmd=0x55ab28200f20 "set as-path exclude as-path-access-list test", matched=0x0, vtysh=0) at lib/command.c:1228 > FRRouting#23 0x00007fb39595242c in vty_command (vty=0x55ab281f6680, buf=0x55ab28200f20 "set as-path exclude as-path-access-list test") at lib/vty.c:625 > FRRouting#24 0x00007fb3959541c5 in vty_execute (vty=0x55ab281f6680) at lib/vty.c:1388 > FRRouting#25 0x00007fb3959563db in vtysh_read (thread=0x7ffd122e2bb0) at lib/vty.c:2400 > FRRouting#26 0x00007fb39594b785 in event_call (thread=0x7ffd122e2bb0) at lib/event.c:1996 > FRRouting#27 0x00007fb3958d1365 in frr_run (master=0x55ab27b56d70) at lib/libfrr.c:1231 > FRRouting#28 0x000055ab2747f1cc in main (argc=3, argv=0x7ffd122e2e08) at bgpd/bgp_main.c:555 Fixes: 094dcc3 ("bgpd: fix "bgp as-pah access-list" with "set aspath exclude" set/unset issues") Signed-off-by: Louis Scalbert <[email protected]>
The following ASAN issue has been observed: > ERROR: AddressSanitizer: heap-use-after-free on address 0x6160000acba4 at pc 0x55910c5694d0 bp 0x7ffe3a8ac850 sp 0x7ffe3a8ac840 > READ of size 4 at 0x6160000acba4 thread T0 > #0 0x55910c5694cf in ctx_info_from_zns zebra/zebra_dplane.c:3315 > FRRouting#1 0x55910c569696 in dplane_ctx_ns_init zebra/zebra_dplane.c:3331 > FRRouting#2 0x55910c56bf61 in dplane_ctx_nexthop_init zebra/zebra_dplane.c:3680 > FRRouting#3 0x55910c5711ca in dplane_nexthop_update_internal zebra/zebra_dplane.c:4490 > FRRouting#4 0x55910c571c5c in dplane_nexthop_delete zebra/zebra_dplane.c:4717 > FRRouting#5 0x55910c61e90e in zebra_nhg_uninstall_kernel zebra/zebra_nhg.c:3413 > FRRouting#6 0x55910c615d8a in zebra_nhg_decrement_ref zebra/zebra_nhg.c:1919 > FRRouting#7 0x55910c6404db in route_entry_update_nhe zebra/zebra_rib.c:454 > FRRouting#8 0x55910c64c904 in rib_re_nhg_free zebra/zebra_rib.c:2822 > FRRouting#9 0x55910c655be2 in rib_unlink zebra/zebra_rib.c:4212 > FRRouting#10 0x55910c6430f9 in zebra_rtable_node_cleanup zebra/zebra_rib.c:968 > FRRouting#11 0x7f26f275b8a9 in route_node_free lib/table.c:75 > FRRouting#12 0x7f26f275bae4 in route_table_free lib/table.c:111 > FRRouting#13 0x7f26f275b749 in route_table_finish lib/table.c:46 > FRRouting#14 0x55910c65db17 in zebra_router_free_table zebra/zebra_router.c:191 > FRRouting#15 0x55910c65dfb5 in zebra_router_terminate zebra/zebra_router.c:244 > FRRouting#16 0x55910c4f40db in zebra_finalize zebra/main.c:249 > FRRouting#17 0x7f26f2777108 in event_call lib/event.c:2011 > FRRouting#18 0x7f26f264180e in frr_run lib/libfrr.c:1212 > FRRouting#19 0x55910c4f49cb in main zebra/main.c:531 > FRRouting#20 0x7f26f2029d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f26f2029e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x55910c4b0114 in _start (/usr/lib/frr/zebra+0x1ae114) It happens with FRR using the kernel. During shutdown, the namespace identifier is attempted to be obtained by zebra, in an attempt to prepare zebra dataplane nexthop messages. Fix this by accessing the ns structure. Signed-off-by: Philippe Guibert <[email protected]>
… the neighbor status remains UP Test Scenario: RouterA and RouterB are in the same routing domain and have configured a P2P link. RouterA is configured with "is-type level-1" while RouterB is configured with "is-type level-1-2". They establish a level-1 UP neighborship. In this scenario, we expect that when RouterB's configuration is switched to "is-type level-2-only", the neighborship status on both RouterA and RouterB would be non-UP. However, RouterB still shows the neighbor as UP. Upon receiving a P2P Hello packet, the function "process_p2p_hello" is invoked. According to the ISO/IEC 10589 protocol specification, section 8.2.5.2 a) and tables 5 and 7, if the "iih->circ_type" of the neighbor's hello packet does not match one's own "circuit->is_type," we may choose to take no action. When establishing a neighborship for the first time, the neighbor's status can remain in the "Initializing" state. However, if the neighborship has already been established and one's own "circuit->is_type" changes, the neighbor's UP status cannot be reset. Therefore, when processing P2P Hello packets, we should be cognizant of changes in our own link adjacency type. Topotest has identified a core issue during testing. (gdb) bt "#0 0xb7efe579 in __kernel_vsyscall () \FRRouting#1 0xb79f62f7 in ?? () \FRRouting#2 0xbf981dd0 in ?? () \FRRouting#3 <signal handler called> \FRRouting#4 0xb79f7722 in ?? () \FRRouting#5 0xb7ed8634 in _DYNAMIC () from /home/z15467/isis_core/usr/lib/i386-linux-gnu/frr/libfrr.so.0.0.0 \FRRouting#6 0x0001003c in ?? () \FRRouting#7 0x00010000 in ?? () \FRRouting#8 0xb7df3322 in _frr_mtx_lock (mutex=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/frr_pthread.h:255 \FRRouting#9 event_timer_remain_msec (thread=0x10000) at ../lib/event.c:734 \FRRouting#10 event_timer_remain_msec (thread=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/event.c:727 \FRRouting#11 0x004fb4aa in _send_hello_sched (circuit=<optimized out>, threadp=0x2189de0, level=1, delay=<optimized out>) at ../isisd/isis_pdu.c:2116 \FRRouting#12 0x004e8dbc in isis_circuit_up (circuit=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../isisd/isis_circuit.c:734 \FRRouting#13 0x004ea8f7 in isis_csm_state_change (event=<optimized out>, circuit=<optimized out>, arg=<optimized out>) at ../isisd/isis_csm.c:98 \FRRouting#14 0x004ea23f in isis_circuit_circ_type_set (circuit=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, circ_type=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../isisd/isis_circuit.c:1578 \FRRouting#15 0x0053aefa in lib_interface_isis_network_type_modify (args=<optimized out>) at ../isisd/isis_nb_config.c:4190 \FRRouting#16 0xb7dbcc8d in nb_callback_modify (errmsg_len=8192, errmsg=0xbf982afc "", resource=0x2186220, dnode=<optimized out>, event=NB_EV_APPLY, nb_node=0x1fafe70, context=<optimized out>) at ../lib/northbound.c:1550 \FRRouting#17 nb_callback_configuration (context=<optimized out>, event=NB_EV_APPLY, change=<optimized out>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:1900 \FRRouting#18 0xb7dbd646 in nb_transaction_process (errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, event=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:2028 \FRRouting#19 nb_candidate_commit_apply (transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, save_transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, transaction_id=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:1368 \FRRouting#20 0xb7dbdd68 in nb_candidate_commit (context=..., candidate=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, save_transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, comment=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, transaction_id=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:1401 \FRRouting#21 0xb7dc0cff in nb_cli_classic_commit (vty=vty@entry=0x21d6940) at ../lib/northbound_cli.c:57 \FRRouting#22 0xb7dc0f46 in nb_cli_apply_changes_internal (vty=vty@entry=0x21d6940, xpath_base=xpath_base@entry=0xbf986b7c "/frr-interface:lib/interface[name='r5-eth0']", clear_pending=clear_pending@entry=false) at ../lib/northbound_cli.c:184 \FRRouting#23 0xb7dc130b in nb_cli_apply_changes (vty=<optimized out>, xpath_base_fmt=<optimized out>) at ../lib/northbound_cli.c:240 \FRRouting#24 0x00542c1d in isis_network_magic (self=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, argc=<optimized out>, argv=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, no=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../isisd/isis_cli.c:3101 \FRRouting#25 isis_network (self=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, argc=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, argv=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ./isisd/isis_cli_clippy.c:5499 \FRRouting#26 0xb7d6d8f1 in cmd_execute_command_real (vline=vline@entry=0x219afa0, vty=vty@entry=0x21d6940, cmd=cmd@entry=0x0, up_level=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/command.c:1003 \FRRouting#27 0xb7d6d9e0 in cmd_execute_command (vline=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, cmd=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vtysh=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/command.c:1061 \FRRouting#28 0xb7d6dc60 in cmd_execute (vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, cmd=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, matched=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vtysh=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/command.c:1228 \FRRouting#29 0xb7dfb58a in vty_command (vty=vty@entry=0x21d6940, buf=0x21e0ff0 ' ' <repeats 12 times>, "isis network point-to-point") at ../lib/vty.c:625 \FRRouting#30 0xb7dfc560 in vty_execute (vty=vty@entry=0x21d6940) at ../lib/vty.c:1388 \FRRouting#31 0xb7dfdc8d in vtysh_read (thread=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/vty.c:2400 \FRRouting#32 0xb7df4d47 in event_call (thread=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/event.c:2019 \FRRouting#33 0xb7d9a831 in frr_run (master=<optimized out>) at ../lib/libfrr.c:1232 \FRRouting#34 0x004e4758 in main (argc=7, argv=0xbf989a24, envp=0xbf989a44) at ../isisd/isis_main.c:354 (gdb) f 9 \FRRouting#9 event_timer_remain_msec (thread=0x10000) at ../lib/event.c:734 734 ../lib/event.c: No such file or directory. (gdb) p pthread No symbol "pthread" in current context. (gdb) p thread $1 = (struct event *) 0x10000 When LAN links and P2P links share the` circuit->u` of a neighbor, if one link is no longer in use and the union is not cleared, the other link is unable to pass the non-empty check, resulting in accessing an invalid pointer. Unfortunately, for non-DIS devices in LAN links, `circuit->u.bc.run_dr_elect[x]` is essentially always 1, but in `isis_circuit_down()`,` circuit->u.bc.run_dr_elect[x] `will not be cleared because `circuit->u.bc.is_dr[x]` is always 0. Consequently, when switching to a P2P link, `isis_circuit_circ_type_set()` does not reset the link in a non-C_STATE_UP state, leading to subsequent accesses of `circuit->u.p2p.t_send_p2p_hello` resulting in a non-empty yet invalid address. I believe that in `isis_circuit_down()`, the LAN link should unconditionally clear `circuit->u.bc.run_dr_elect[x]`. Signed-off-by: zhou-run <[email protected]>
The following causes a isisd crash. > # cat config > affinity-map green bit-position 0 > router isis 1 > flex-algo 129 > affinity exclude-any green > # vtysh -f config > #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#1 0x00007f650cd32756 in core_handler (signo=6, siginfo=0x7ffc56f93070, context=0x7ffc56f92f40) at lib/sigevent.c:258 > FRRouting#2 <signal handler called> > FRRouting#3 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#4 0x00007f650c91c537 in __GI_abort () at abort.c:79 > FRRouting#5 0x00007f650cd007c9 in nb_running_get_entry_worker (dnode=0x0, xpath=0x0, abort_if_not_found=true, rec_search=true) at lib/northbound.c:2531 > FRRouting#6 0x00007f650cd007f9 in nb_running_get_entry (dnode=0x55d9ad406e00, xpath=0x0, abort_if_not_found=true) at lib/northbound.c:2537 > FRRouting#7 0x000055d9ab302248 in isis_instance_flex_algo_affinity_set (args=0x7ffc56f947a0, type=2) at isisd/isis_nb_config.c:2998 > FRRouting#8 0x000055d9ab3027c0 in isis_instance_flex_algo_affinity_exclude_any_create (args=0x7ffc56f947a0) at isisd/isis_nb_config.c:3155 > FRRouting#9 0x00007f650ccfe284 in nb_callback_create (context=0x7ffc56f94d20, nb_node=0x55d9ad28b540, event=NB_EV_VALIDATE, dnode=0x55d9ad406e00, resource=0x0, errmsg=0x7ffc56f94de0 "", > errmsg_len=8192) at lib/northbound.c:1487 > FRRouting#10 0x00007f650ccff067 in nb_callback_configuration (context=0x7ffc56f94d20, event=NB_EV_VALIDATE, change=0x55d9ad406d40, errmsg=0x7ffc56f94de0 "", errmsg_len=8192) at lib/northbound.c:1884 > FRRouting#11 0x00007f650ccfda31 in nb_candidate_validate_code (context=0x7ffc56f94d20, candidate=0x55d9ad20d710, changes=0x7ffc56f94d38, errmsg=0x7ffc56f94de0 "", errmsg_len=8192) > at lib/northbound.c:1246 > FRRouting#12 0x00007f650ccfdc67 in nb_candidate_commit_prepare (context=..., candidate=0x55d9ad20d710, comment=0x0, transaction=0x7ffc56f94da0, skip_validate=false, ignore_zero_change=false, > errmsg=0x7ffc56f94de0 "", errmsg_len=8192) at lib/northbound.c:1317 > FRRouting#13 0x00007f650ccfdec4 in nb_candidate_commit (context=..., candidate=0x55d9ad20d710, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7ffc56f94de0 "", errmsg_len=8192) > at lib/northbound.c:1381 > FRRouting#14 0x00007f650cd045ba in nb_cli_classic_commit (vty=0x55d9ad3f7490) at lib/northbound_cli.c:57 > FRRouting#15 0x00007f650cd04749 in nb_cli_pending_commit_check (vty=0x55d9ad3f7490) at lib/northbound_cli.c:96 > FRRouting#16 0x00007f650cc94340 in cmd_execute_command_real (vline=0x55d9ad3eea10, vty=0x55d9ad3f7490, cmd=0x0, up_level=0) at lib/command.c:1000 > FRRouting#17 0x00007f650cc94599 in cmd_execute_command (vline=0x55d9ad3eea10, vty=0x55d9ad3f7490, cmd=0x0, vtysh=0) at lib/command.c:1080 > FRRouting#18 0x00007f650cc94a0c in cmd_execute (vty=0x55d9ad3f7490, cmd=0x55d9ad401d30 "XFRR_end_configuration", matched=0x0, vtysh=0) at lib/command.c:1228 > FRRouting#19 0x00007f650cd523a4 in vty_command (vty=0x55d9ad3f7490, buf=0x55d9ad401d30 "XFRR_end_configuration") at lib/vty.c:625 > FRRouting#20 0x00007f650cd5413d in vty_execute (vty=0x55d9ad3f7490) at lib/vty.c:1388 > FRRouting#21 0x00007f650cd56353 in vtysh_read (thread=0x7ffc56f99370) at lib/vty.c:2400 > FRRouting#22 0x00007f650cd4b6fd in event_call (thread=0x7ffc56f99370) at lib/event.c:1996 > FRRouting#23 0x00007f650ccd1365 in frr_run (master=0x55d9ad103cf0) at lib/libfrr.c:1231 > FRRouting#24 0x000055d9ab29036e in main (argc=2, argv=0x7ffc56f99598, envp=0x7ffc56f995b0) at isisd/isis_main.c:354 Configuring the same in vtysh configure interactive mode works properly. When using "vtysh -f", the northbound compatible configuration is committed together whereas, in interactive mode, it committed line by line. In the first situation, in validation state nb_running_get_entry() fails because the area not yet in running. Do not use nb_running_get_entry() northbound validation state. Fixes: 893882e ("isisd: add isis flex-algo configuration backend") Signed-off-by: Louis Scalbert <[email protected]>
Level 2 adjacency list is not supposed to be always set. > #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#1 0x00007f9f0353274f in core_handler (signo=6, siginfo=0x7ffe95260770, context=0x7ffe95260640) at lib/sigevent.c:258 > FRRouting#2 <signal handler called> > FRRouting#3 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#4 0x00007f9f0324e537 in __GI_abort () at abort.c:79 > FRRouting#5 0x00007f9f035744ea in _zlog_assert_failed (xref=0x7f9f0362c6c0 <_xref.15>, extra=0x0) at lib/zlog.c:789 > FRRouting#6 0x00007f9f034d25ee in listnode_head (list=0x0) at lib/linklist.c:316 > FRRouting#7 0x000055cd65aaa481 in lib_interface_state_isis_adjacencies_adjacency_get_next (args=0x7ffe95261730) at isisd/isis_nb_state.c:101 > FRRouting#8 0x00007f9f034feadd in nb_callback_get_next (nb_node=0x55cd673c0190, parent_list_entry=0x55cd67570d30, list_entry=0x55cd6758f8a0) at lib/northbound.c:1748 > FRRouting#9 0x00007f9f0350bf07 in __walk (ys=0x55cd675782b0, is_resume=false) at lib/northbound_oper.c:1264 > FRRouting#10 0x00007f9f0350deaa in nb_op_walk_start (ys=0x55cd675782b0) at lib/northbound_oper.c:1741 > FRRouting#11 0x00007f9f0350e079 in nb_oper_iterate_legacy (xpath=0x55cd67595c60 "/frr-interface:lib", translator=0x0, flags=0, cb=0x0, cb_arg=0x0, tree=0x7ffe952621b0) at lib/northbound_oper.c:1803 > FRRouting#12 0x00007f9f03507661 in show_yang_operational_data_magic (self=0x7f9f03634a80 <show_yang_operational_data_cmd>, vty=0x55cd675a61f0, argc=4, argv=0x55cd6758eab0, > xpath=0x55cd67595c60 "/frr-interface:lib", json=0x0, xml=0x0, translator_family=0x0, with_config=0x0) at lib/northbound_cli.c:1576 > FRRouting#13 0x00007f9f035037f0 in show_yang_operational_data (self=0x7f9f03634a80 <show_yang_operational_data_cmd>, vty=0x55cd675a61f0, argc=4, argv=0x55cd6758eab0) > at ./lib/northbound_cli_clippy.c:906 > FRRouting#14 0x00007f9f0349435d in cmd_execute_command_real (vline=0x55cd6758e490, vty=0x55cd675a61f0, cmd=0x0, up_level=0) at lib/command.c:1003 > FRRouting#15 0x00007f9f03494477 in cmd_execute_command (vline=0x55cd67585340, vty=0x55cd675a61f0, cmd=0x0, vtysh=0) at lib/command.c:1053 > FRRouting#16 0x00007f9f03494a0c in cmd_execute (vty=0x55cd675a61f0, cmd=0x55cd67579040 "do show yang operational-data /frr-interface:lib", matched=0x0, vtysh=0) at lib/command.c:1228 > FRRouting#17 0x00007f9f0355239d in vty_command (vty=0x55cd675a61f0, buf=0x55cd67579040 "do show yang operational-data /frr-interface:lib") at lib/vty.c:625 > FRRouting#18 0x00007f9f03554136 in vty_execute (vty=0x55cd675a61f0) at lib/vty.c:1388 > FRRouting#19 0x00007f9f0355634c in vtysh_read (thread=0x7ffe952647a0) at lib/vty.c:2400 > FRRouting#20 0x00007f9f0354b6f6 in event_call (thread=0x7ffe952647a0) at lib/event.c:1996 > FRRouting#21 0x00007f9f034d1365 in frr_run (master=0x55cd67204da0) at lib/libfrr.c:1231 > FRRouting#22 0x000055cd65a3236e in main (argc=7, argv=0x7ffe952649c8, envp=0x7ffe95264a08) at isisd/isis_main.c:354 Fixes: 2a1c520 ("isisd: split northbound callbacks into multiple files") Signed-off-by: Louis Scalbert <[email protected]>
Fix a crash when modifying a route-map with set as-path exclude without as-path-access-list: > router(config)# route-map routemaptest deny 1 > router(config-route-map)# set as-path exclude 33 34 35 > router(config-route-map)# set as-path exclude as-path-access-list test > #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50 > FRRouting#1 0x00007fb3959327de in core_handler (signo=11, siginfo=0x7ffd122da530, context=0x7ffd122da400) at lib/sigevent.c:258 > FRRouting#2 <signal handler called> > FRRouting#3 0x000055ab2762a1bd in as_list_list_del (h=0x55ab27897680 <as_exclude_list_orphan>, item=0x55ab28204e20) at ./bgpd/bgp_aspath.h:77 > FRRouting#4 0x000055ab2762d1a8 in as_exclude_remove_orphan (ase=0x55ab28204e20) at bgpd/bgp_aspath.c:1574 > FRRouting#5 0x000055ab27550538 in route_aspath_exclude_free (rule=0x55ab28204e20) at bgpd/bgp_routemap.c:2366 > FRRouting#6 0x00007fb39591f00c in route_map_rule_delete (list=0x55ab28203498, rule=0x55ab28204170) at lib/routemap.c:1357 > FRRouting#7 0x00007fb39591f87c in route_map_add_set (index=0x55ab28203460, set_name=0x55ab276ad2aa "as-path exclude", set_arg=0x55ab281e4f70 "as-path-access-list test") at lib/routemap.c:1674 > FRRouting#8 0x00007fb39591d3f3 in generic_set_add (index=0x55ab28203460, command=0x55ab276ad2aa "as-path exclude", arg=0x55ab281e4f70 "as-path-access-list test", errmsg=0x7ffd122db870 "", > errmsg_len=8192) at lib/routemap.c:533 > FRRouting#9 0x000055ab2755e78e in lib_route_map_entry_set_action_rmap_set_action_exclude_as_path_modify (args=0x7ffd122db290) at bgpd/bgp_routemap_nb_config.c:2427 > FRRouting#10 0x00007fb3958fe417 in nb_callback_modify (context=0x55ab28205aa0, nb_node=0x55ab27cb31e0, event=NB_EV_APPLY, dnode=0x55ab28202690, resource=0x55ab27c32148, errmsg=0x7ffd122db870 "", > errmsg_len=8192) at lib/northbound.c:1538 > FRRouting#11 0x00007fb3958ff0ab in nb_callback_configuration (context=0x55ab28205aa0, event=NB_EV_APPLY, change=0x55ab27c32110, errmsg=0x7ffd122db870 "", errmsg_len=8192) at lib/northbound.c:1888 > FRRouting#12 0x00007fb3958ff5e4 in nb_transaction_process (event=NB_EV_APPLY, transaction=0x55ab28205aa0, errmsg=0x7ffd122db870 "", errmsg_len=8192) at lib/northbound.c:2016 > FRRouting#13 0x00007fb3958fddba in nb_candidate_commit_apply (transaction=0x55ab28205aa0, save_transaction=true, transaction_id=0x0, errmsg=0x7ffd122db870 "", errmsg_len=8192) > at lib/northbound.c:1356 > FRRouting#14 0x00007fb3958fdef0 in nb_candidate_commit (context=..., candidate=0x55ab27c2c9a0, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7ffd122db870 "", errmsg_len=8192) > at lib/northbound.c:1389 > FRRouting#15 0x00007fb3959045ba in nb_cli_classic_commit (vty=0x55ab281f6680) at lib/northbound_cli.c:57 > FRRouting#16 0x00007fb395904b5a in nb_cli_apply_changes_internal (vty=0x55ab281f6680, xpath_base=0x7ffd122dfd10 "/frr-route-map:lib/route-map[name='routemaptest']/entry[sequence='1']", > clear_pending=false) at lib/northbound_cli.c:184 > FRRouting#17 0x00007fb395904ebf in nb_cli_apply_changes (vty=0x55ab281f6680, xpath_base_fmt=0x0) at lib/northbound_cli.c:240 > --Type <RET> for more, q to quit, c to continue without paging-- > FRRouting#18 0x000055ab27557d2e in set_aspath_exclude_access_list_magic (self=0x55ab2775c300 <set_aspath_exclude_access_list_cmd>, vty=0x55ab281f6680, argc=5, argv=0x55ab28204c80, > as_path_filter_name=0x55ab28202040 "test") at bgpd/bgp_routemap.c:6397 > FRRouting#19 0x000055ab2754bdea in set_aspath_exclude_access_list (self=0x55ab2775c300 <set_aspath_exclude_access_list_cmd>, vty=0x55ab281f6680, argc=5, argv=0x55ab28204c80) > at ./bgpd/bgp_routemap_clippy.c:856 > FRRouting#20 0x00007fb39589435d in cmd_execute_command_real (vline=0x55ab281e61f0, vty=0x55ab281f6680, cmd=0x0, up_level=0) at lib/command.c:1003 > FRRouting#21 0x00007fb3958944be in cmd_execute_command (vline=0x55ab281e61f0, vty=0x55ab281f6680, cmd=0x0, vtysh=0) at lib/command.c:1062 > FRRouting#22 0x00007fb395894a0c in cmd_execute (vty=0x55ab281f6680, cmd=0x55ab28200f20 "set as-path exclude as-path-access-list test", matched=0x0, vtysh=0) at lib/command.c:1228 > FRRouting#23 0x00007fb39595242c in vty_command (vty=0x55ab281f6680, buf=0x55ab28200f20 "set as-path exclude as-path-access-list test") at lib/vty.c:625 > FRRouting#24 0x00007fb3959541c5 in vty_execute (vty=0x55ab281f6680) at lib/vty.c:1388 > FRRouting#25 0x00007fb3959563db in vtysh_read (thread=0x7ffd122e2bb0) at lib/vty.c:2400 > FRRouting#26 0x00007fb39594b785 in event_call (thread=0x7ffd122e2bb0) at lib/event.c:1996 > FRRouting#27 0x00007fb3958d1365 in frr_run (master=0x55ab27b56d70) at lib/libfrr.c:1231 > FRRouting#28 0x000055ab2747f1cc in main (argc=3, argv=0x7ffd122e2e08) at bgpd/bgp_main.c:555 Fixes: 094dcc3 ("bgpd: fix "bgp as-pah access-list" with "set aspath exclude" set/unset issues") Signed-off-by: Louis Scalbert <[email protected]>
The following ASAN issue has been observed: > ERROR: AddressSanitizer: heap-use-after-free on address 0x6160000acba4 at pc 0x55910c5694d0 bp 0x7ffe3a8ac850 sp 0x7ffe3a8ac840 > READ of size 4 at 0x6160000acba4 thread T0 > #0 0x55910c5694cf in ctx_info_from_zns zebra/zebra_dplane.c:3315 > FRRouting#1 0x55910c569696 in dplane_ctx_ns_init zebra/zebra_dplane.c:3331 > FRRouting#2 0x55910c56bf61 in dplane_ctx_nexthop_init zebra/zebra_dplane.c:3680 > FRRouting#3 0x55910c5711ca in dplane_nexthop_update_internal zebra/zebra_dplane.c:4490 > FRRouting#4 0x55910c571c5c in dplane_nexthop_delete zebra/zebra_dplane.c:4717 > FRRouting#5 0x55910c61e90e in zebra_nhg_uninstall_kernel zebra/zebra_nhg.c:3413 > FRRouting#6 0x55910c615d8a in zebra_nhg_decrement_ref zebra/zebra_nhg.c:1919 > FRRouting#7 0x55910c6404db in route_entry_update_nhe zebra/zebra_rib.c:454 > FRRouting#8 0x55910c64c904 in rib_re_nhg_free zebra/zebra_rib.c:2822 > FRRouting#9 0x55910c655be2 in rib_unlink zebra/zebra_rib.c:4212 > FRRouting#10 0x55910c6430f9 in zebra_rtable_node_cleanup zebra/zebra_rib.c:968 > FRRouting#11 0x7f26f275b8a9 in route_node_free lib/table.c:75 > FRRouting#12 0x7f26f275bae4 in route_table_free lib/table.c:111 > FRRouting#13 0x7f26f275b749 in route_table_finish lib/table.c:46 > FRRouting#14 0x55910c65db17 in zebra_router_free_table zebra/zebra_router.c:191 > FRRouting#15 0x55910c65dfb5 in zebra_router_terminate zebra/zebra_router.c:244 > FRRouting#16 0x55910c4f40db in zebra_finalize zebra/main.c:249 > FRRouting#17 0x7f26f2777108 in event_call lib/event.c:2011 > FRRouting#18 0x7f26f264180e in frr_run lib/libfrr.c:1212 > FRRouting#19 0x55910c4f49cb in main zebra/main.c:531 > FRRouting#20 0x7f26f2029d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f26f2029e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x55910c4b0114 in _start (/usr/lib/frr/zebra+0x1ae114) It happens with FRR using the kernel. During shutdown, the namespace identifier is attempted to be obtained by zebra, in an attempt to prepare zebra dataplane nexthop messages. Fix this by accessing the ns structure. Signed-off-by: Philippe Guibert <[email protected]>
… the neighbor status remains UP Test Scenario: RouterA and RouterB are in the same routing domain and have configured a P2P link. RouterA is configured with "is-type level-1" while RouterB is configured with "is-type level-1-2". They establish a level-1 UP neighborship. In this scenario, we expect that when RouterB's configuration is switched to "is-type level-2-only", the neighborship status on both RouterA and RouterB would be non-UP. However, RouterB still shows the neighbor as UP. Upon receiving a P2P Hello packet, the function "process_p2p_hello" is invoked. According to the ISO/IEC 10589 protocol specification, section 8.2.5.2 a) and tables 5 and 7, if the "iih->circ_type" of the neighbor's hello packet does not match one's own "circuit->is_type," we may choose to take no action. When establishing a neighborship for the first time, the neighbor's status can remain in the "Initializing" state. However, if the neighborship has already been established and one's own "circuit->is_type" changes, the neighbor's UP status cannot be reset. Therefore, when processing P2P Hello packets, we should be cognizant of changes in our own link adjacency type. Topotest has identified a core issue during testing. (gdb) bt "#0 0xb7efe579 in __kernel_vsyscall () \FRRouting#1 0xb79f62f7 in ?? () \FRRouting#2 0xbf981dd0 in ?? () \FRRouting#3 <signal handler called> \FRRouting#4 0xb79f7722 in ?? () \FRRouting#5 0xb7ed8634 in _DYNAMIC () from /home/z15467/isis_core/usr/lib/i386-linux-gnu/frr/libfrr.so.0.0.0 \FRRouting#6 0x0001003c in ?? () \FRRouting#7 0x00010000 in ?? () \FRRouting#8 0xb7df3322 in _frr_mtx_lock (mutex=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/frr_pthread.h:255 \FRRouting#9 event_timer_remain_msec (thread=0x10000) at ../lib/event.c:734 \FRRouting#10 event_timer_remain_msec (thread=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/event.c:727 \FRRouting#11 0x004fb4aa in _send_hello_sched (circuit=<optimized out>, threadp=0x2189de0, level=1, delay=<optimized out>) at ../isisd/isis_pdu.c:2116 \FRRouting#12 0x004e8dbc in isis_circuit_up (circuit=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../isisd/isis_circuit.c:734 \FRRouting#13 0x004ea8f7 in isis_csm_state_change (event=<optimized out>, circuit=<optimized out>, arg=<optimized out>) at ../isisd/isis_csm.c:98 \FRRouting#14 0x004ea23f in isis_circuit_circ_type_set (circuit=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, circ_type=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../isisd/isis_circuit.c:1578 \FRRouting#15 0x0053aefa in lib_interface_isis_network_type_modify (args=<optimized out>) at ../isisd/isis_nb_config.c:4190 \FRRouting#16 0xb7dbcc8d in nb_callback_modify (errmsg_len=8192, errmsg=0xbf982afc "", resource=0x2186220, dnode=<optimized out>, event=NB_EV_APPLY, nb_node=0x1fafe70, context=<optimized out>) at ../lib/northbound.c:1550 \FRRouting#17 nb_callback_configuration (context=<optimized out>, event=NB_EV_APPLY, change=<optimized out>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:1900 \FRRouting#18 0xb7dbd646 in nb_transaction_process (errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, event=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:2028 \FRRouting#19 nb_candidate_commit_apply (transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, save_transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, transaction_id=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:1368 \FRRouting#20 0xb7dbdd68 in nb_candidate_commit (context=..., candidate=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, save_transaction=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, comment=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, transaction_id=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, errmsg_len=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/northbound.c:1401 \FRRouting#21 0xb7dc0cff in nb_cli_classic_commit (vty=vty@entry=0x21d6940) at ../lib/northbound_cli.c:57 \FRRouting#22 0xb7dc0f46 in nb_cli_apply_changes_internal (vty=vty@entry=0x21d6940, xpath_base=xpath_base@entry=0xbf986b7c "/frr-interface:lib/interface[name='r5-eth0']", clear_pending=clear_pending@entry=false) at ../lib/northbound_cli.c:184 \FRRouting#23 0xb7dc130b in nb_cli_apply_changes (vty=<optimized out>, xpath_base_fmt=<optimized out>) at ../lib/northbound_cli.c:240 \FRRouting#24 0x00542c1d in isis_network_magic (self=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, argc=<optimized out>, argv=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, no=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../isisd/isis_cli.c:3101 \FRRouting#25 isis_network (self=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, argc=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, argv=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ./isisd/isis_cli_clippy.c:5499 \FRRouting#26 0xb7d6d8f1 in cmd_execute_command_real (vline=vline@entry=0x219afa0, vty=vty@entry=0x21d6940, cmd=cmd@entry=0x0, up_level=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/command.c:1003 \FRRouting#27 0xb7d6d9e0 in cmd_execute_command (vline=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, cmd=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vtysh=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/command.c:1061 \FRRouting#28 0xb7d6dc60 in cmd_execute (vty=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, cmd=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, matched=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>, vtysh=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/command.c:1228 \FRRouting#29 0xb7dfb58a in vty_command (vty=vty@entry=0x21d6940, buf=0x21e0ff0 ' ' <repeats 12 times>, "isis network point-to-point") at ../lib/vty.c:625 \FRRouting#30 0xb7dfc560 in vty_execute (vty=vty@entry=0x21d6940) at ../lib/vty.c:1388 \FRRouting#31 0xb7dfdc8d in vtysh_read (thread=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/vty.c:2400 \FRRouting#32 0xb7df4d47 in event_call (thread=<error reading variable: dwarf2_find_location_expression: Corrupted DWARF expression.>) at ../lib/event.c:2019 \FRRouting#33 0xb7d9a831 in frr_run (master=<optimized out>) at ../lib/libfrr.c:1232 \FRRouting#34 0x004e4758 in main (argc=7, argv=0xbf989a24, envp=0xbf989a44) at ../isisd/isis_main.c:354 (gdb) f 9 \FRRouting#9 event_timer_remain_msec (thread=0x10000) at ../lib/event.c:734 734 ../lib/event.c: No such file or directory. (gdb) p pthread No symbol "pthread" in current context. (gdb) p thread $1 = (struct event *) 0x10000 When LAN links and P2P links share the` circuit->u` of a neighbor, if one link is no longer in use and the union is not cleared, the other link is unable to pass the non-empty check, resulting in accessing an invalid pointer. Unfortunately, for non-DIS devices in LAN links, `circuit->u.bc.run_dr_elect[x]` is essentially always 1, but in `isis_circuit_down()`,` circuit->u.bc.run_dr_elect[x] `will not be cleared because `circuit->u.bc.is_dr[x]` is always 0. Consequently, when switching to a P2P link, `isis_circuit_circ_type_set()` does not reset the link in a non-C_STATE_UP state, leading to subsequent accesses of `circuit->u.p2p.t_send_p2p_hello` resulting in a non-empty yet invalid address. I believe that in `isis_circuit_down()`, the LAN link should unconditionally clear `circuit->u.bc.run_dr_elect[x]`. Signed-off-by: zhou-run <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
The following ASAN error can be seen. > ERROR: AddressSanitizer: attempting to call malloc_usable_size() for pointer which is not owned: 0x608000036c20 > #0 0x7f3d7a4b5425 in __interceptor_malloc_usable_size ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:198 > FRRouting#1 0x7f3d7a426a16 in __sanitizer::BufferedStackTrace::Unwind(unsigned long, unsigned long, void*, bool, unsigned int) ../../../../src/libsanitizer/sanitizer_common > /sanitizer_stacktrace.h:122 > FRRouting#2 0x7f3d7a426a16 in __asan::asan_malloc_usable_size(void const*, unsigned long, unsigned long) ../../../../src/libsanitizer/asan/asan_allocator.cpp:1074 > FRRouting#3 0x7f3d7a03f330 in mt_count_free lib/memory.c:78 > FRRouting#4 0x7f3d7a03f330 in qfree lib/memory.c:130 > FRRouting#5 0x7f3d76ccf89b in bmp_peer_status_changed bgpd/bgp_bmp.c:982 > FRRouting#6 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#7 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#8 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#9 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#10 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#11 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#12 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#13 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#14 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#15 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#16 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#17 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#18 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#19 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#20 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > FRRouting#21 0x7f3d79a29e3f in __libc_start_main_impl ../csu/libc-start.c:392 > FRRouting#22 0x560ae29e4ef4 in _start (/usr/lib/frr/bgpd+0x2eeef4) > > 0x608000036c20 is located 0 bytes inside of 81-byte region [0x608000036c20,0x608000036c71) > freed by thread T0 here: > #0 0x7f3d7a4b4537 in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127 > FRRouting#1 0x7f3d76ccf85f in bmp_peer_status_changed bgpd/bgp_bmp.c:981 > FRRouting#2 0x560ae2aa6a94 in hook_call_peer_status_changed bgpd/bgp_fsm.c:47 > FRRouting#3 0x560ae2aa6a94 in bgp_fsm_change_status bgpd/bgp_fsm.c:1287 > FRRouting#4 0x560ae2c4f2e5 in peer_delete bgpd/bgpd.c:2777 > FRRouting#5 0x560ae2c58d24 in bgp_delete bgpd/bgpd.c:4140 > FRRouting#6 0x560ae2bbb47e in no_router_bgp bgpd/bgp_vty.c:1764 > FRRouting#7 0x7f3d79fb74ed in cmd_execute_command_real lib/command.c:1003 > FRRouting#8 0x7f3d79fb78a3 in cmd_execute_command lib/command.c:1062 > FRRouting#9 0x7f3d79fb7e03 in cmd_execute lib/command.c:1228 > FRRouting#10 0x7f3d7a107b53 in vty_command lib/vty.c:625 > FRRouting#11 0x7f3d7a109902 in vty_execute lib/vty.c:1388 > FRRouting#12 0x7f3d7a10cc32 in vtysh_read lib/vty.c:2400 > FRRouting#13 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#14 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#15 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#16 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 > > previously allocated by thread T0 here: > #0 0x7f3d7a4b4887 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 > FRRouting#1 0x7f3d7a03f0e9 in qmalloc lib/memory.c:101 > FRRouting#2 0x7f3d76cd0166 in bmp_bgp_peer_vrf bgpd/bgp_bmp.c:2194 > FRRouting#3 0x7f3d76cd0166 in bmp_bgp_update_vrf_status bgpd/bgp_bmp.c:2236 > FRRouting#4 0x7f3d76cd29b8 in bmp_vrf_state_changed bgpd/bgp_bmp.c:3479 > FRRouting#5 0x560ae2c45b34 in hook_call_bgp_instance_state bgpd/bgpd.c:88 > FRRouting#6 0x560ae2c4d158 in bgp_instance_up bgpd/bgpd.c:3936 > FRRouting#7 0x560ae29e5ed1 in bgp_vrf_enable bgpd/bgp_main.c:299 > FRRouting#8 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:286 > FRRouting#9 0x7f3d7a0ff8b1 in vrf_enable lib/vrf.c:275 > FRRouting#10 0x7f3d7a12ab66 in zclient_vrf_add lib/zclient.c:2561 > FRRouting#11 0x7f3d7a12eb43 in zclient_read lib/zclient.c:4624 > FRRouting#12 0x7f3d7a0f848b in event_call lib/event.c:2019 > FRRouting#13 0x7f3d7a01e627 in frr_run lib/libfrr.c:1232 > FRRouting#14 0x560ae29e0037 in main bgpd/bgp_main.c:555 > FRRouting#15 0x7f3d79a29d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Signed-off-by: Philippe Guibert <[email protected]>
With soft reconfiguration, the BGP attributes are interned, but the EVPN attributes contained by the standard attributes are also interned. However, during BGP route processing, we performed a copy of the attributes in a new_attr struct, performing a shallow-copy. This made two structs point to the same interned EVPN attributes, freeing the attributes at the end of the input processing. Fix the double-free by increasing the refcount when shallow-copying the attributes. The direct symptom can be seen with a topotest, where bgpd segfaults on exit when cleaning up peer data: FRRouting#12 0x00007fc57d6a8ff5 in malloc_printerr (str=str@entry=0x7fc57d7d18a0 "malloc_consolidate(): unaligned fastbin chunk detected") at ./malloc/malloc.c:5772 FRRouting#13 0x00007fc57d6a9d4c in malloc_consolidate (av=0x7fc57d803ac0 <main_arena>) at ./malloc/malloc.c:4846 FRRouting#14 0x00007fc57d6aada5 in _int_free_maybe_consolidate (av=0x7fc57d803ac0 <main_arena>, size=<optimized out>) at ./malloc/malloc.c:4779 FRRouting#15 0x00007fc57d6ab43a in _int_free (av=0x7fc57d803ac0 <main_arena>, p=<optimized out>, have_lock=<optimized out>) at ./malloc/malloc.c:4646 FRRouting#16 0x00007fc57d6addae in __GI___libc_free (mem=0x55704295e8a0) at ./malloc/malloc.c:3398 FRRouting#17 0x00007fc57dada55e in qfree (mt=mt@entry=0x7fc57dc34e60 <MTYPE_STREAM>, ptr=<optimized out>) at lib/memory.c:131 FRRouting#18 0x00007fc57db1b8f8 in stream_free (s=<optimized out>) at lib/stream.c:109 FRRouting#19 0x000055704186539e in sync_delete (subgrp=0x557042957f00) at bgpd/bgp_updgrp.c:108 FRRouting#20 update_subgroup_delete (subgrp=0x557042957f00) at bgpd/bgp_updgrp.c:1167 FRRouting#21 0x0000557041866c75 in update_subgroup_check_delete (subgrp=<optimized out>) at bgpd/bgp_updgrp.c:1202 FRRouting#22 0x00005570417fbf51 in update_group_remove_peer_afs (peer=<optimized out>) at ./bgpd/bgp_updgrp.h:523 FRRouting#23 bgp_stop (connection=<optimized out>) at bgpd/bgp_fsm.c:1478 FRRouting#24 0x0000557041800357 in bgp_event_update (connection=0x557042956b50, event=TCP_connection_closed) at bgpd/bgp_fsm.c:2655 FRRouting#25 0x00007fc57db28fae in event_call (thread=thread@entry=0x7ffe0c687760) at lib/event.c:2019 FRRouting#26 0x00007fc57daccb28 in frr_run (master=0x5570421106e0) at lib/libfrr.c:1247 FRRouting#27 0x00005570417b1fd3 in main (argc=<optimized out>, argv=0x7ffe0c687a28) at bgpd/bgp_main.c:557 Fixes: 4ace11d ("bgpd: Move evpn_overlay to a pointer")
With soft reconfiguration, the BGP attributes are interned, but the EVPN attributes contained by the standard attributes are also interned. However, during BGP route processing, we performed a copy of the attributes in a new_attr struct, performing a shallow-copy. This made two structs point to the same interned EVPN attributes, freeing the attributes at the end of the input processing. Fix the double-free by increasing the refcount when shallow-copying the attributes. The direct symptom can be seen with a topotest, where bgpd segfaults on exit when cleaning up peer data: (gdb) bt FRRouting#12 0x00007fc57d6a8ff5 in malloc_printerr (str=str@entry=0x7fc57d7d18a0 "malloc_consolidate(): unaligned fastbin chunk detected") at ./malloc/malloc.c:5772 FRRouting#13 0x00007fc57d6a9d4c in malloc_consolidate (av=0x7fc57d803ac0 <main_arena>) at ./malloc/malloc.c:4846 FRRouting#14 0x00007fc57d6aada5 in _int_free_maybe_consolidate (av=0x7fc57d803ac0 <main_arena>, size=<optimized out>) at ./malloc/malloc.c:4779 FRRouting#15 0x00007fc57d6ab43a in _int_free (av=0x7fc57d803ac0 <main_arena>, p=<optimized out>, have_lock=<optimized out>) at ./malloc/malloc.c:4646 FRRouting#16 0x00007fc57d6addae in __GI___libc_free (mem=0x55704295e8a0) at ./malloc/malloc.c:3398 FRRouting#17 0x00007fc57dada55e in qfree (mt=mt@entry=0x7fc57dc34e60 <MTYPE_STREAM>, ptr=<optimized out>) at lib/memory.c:131 FRRouting#18 0x00007fc57db1b8f8 in stream_free (s=<optimized out>) at lib/stream.c:109 FRRouting#19 0x000055704186539e in sync_delete (subgrp=0x557042957f00) at bgpd/bgp_updgrp.c:108 FRRouting#20 update_subgroup_delete (subgrp=0x557042957f00) at bgpd/bgp_updgrp.c:1167 FRRouting#21 0x0000557041866c75 in update_subgroup_check_delete (subgrp=<optimized out>) at bgpd/bgp_updgrp.c:1202 FRRouting#22 0x00005570417fbf51 in update_group_remove_peer_afs (peer=<optimized out>) at ./bgpd/bgp_updgrp.h:523 FRRouting#23 bgp_stop (connection=<optimized out>) at bgpd/bgp_fsm.c:1478 FRRouting#24 0x0000557041800357 in bgp_event_update (connection=0x557042956b50, event=TCP_connection_closed) at bgpd/bgp_fsm.c:2655 FRRouting#25 0x00007fc57db28fae in event_call (thread=thread@entry=0x7ffe0c687760) at lib/event.c:2019 FRRouting#26 0x00007fc57daccb28 in frr_run (master=0x5570421106e0) at lib/libfrr.c:1247 FRRouting#27 0x00005570417b1fd3 in main (argc=<optimized out>, argv=0x7ffe0c687a28) at bgpd/bgp_main.c:557 Situation is even worse in real-world case where the route actually leaves to other peers, as the free'd memory will quickly get reallocated, trampled over, and trigger an assert on IP type (same one as the previous route-map patch): (gdb) bt FRRouting#4 0x00007570922b1569 in _zlog_assert_failed (xref=xref@entry=0x5e9e11716280 <_xref.1>, extra=extra@entry=0x0) at ../lib/zlog.c:767 FRRouting#5 0x00005e9e114f005e in ipaddr_cmp (b=<optimized out>, a=<optimized out>) at ../lib/ipaddr.h:153 FRRouting#6 bgp_route_evpn_same (e1=<optimized out>, e2=<optimized out>) at ../bgpd/bgp_attr_evpn.c:36 FRRouting#7 0x00005e9e114e854b in overlay_index_same (a2=0x7ffc880779b0, a1=0x5e9e3cd16670) at ../bgpd/bgp_attr.h:632 FRRouting#8 attrhash_cmp (p1=0x5e9e3cd16670, p2=0x7ffc880779b0) at ../bgpd/bgp_attr.c:921 FRRouting#9 0x000075709222bd93 in hash_get (hash=0x5e9e3d1a3d70, data=data@entry=0x7ffc880779b0, alloc_func=alloc_func@entry=0x5e9e114e78a0 <bgp_attr_hash_alloc>) at ../lib/hash.c:142 FRRouting#10 0x00005e9e114e89f4 in bgp_attr_intern (attr=attr@entry=0x7ffc880779b0) at ../bgpd/bgp_attr.c:1134 FRRouting#11 0x00005e9e11621443 in bgp_advertise_attr_intern (hash=0x5e9e3d45bdc0, attr=attr@entry=0x7ffc880779b0) at ../bgpd/bgp_advertise.c:106 FRRouting#12 0x00005e9e1159317d in bgp_adj_out_set_subgroup (dest=dest@entry=0x5e9e3d45ca50, subgrp=subgrp@entry=0x5e9e3d45bcc0, attr=attr@entry=0x7ffc880779b0, path=path@entry=0x5e9e3d465010) at ../bgpd/bgp_updgrp_adv.c:618 FRRouting#13 0x00005e9e115666f1 in subgroup_process_announce_selected (subgrp=subgrp@entry=0x5e9e3d45bcc0, selected=<optimized out>, dest=0x5e9e3d45ca50, afi=afi@entry=AFI_L2VPN, safi=safi@entry=SAFI_EVPN, addpath_tx_id=0) at ../bgpd/bgp_route.c:3362 FRRouting#14 0x00005e9e11592a1f in group_announce_route_walkcb (updgrp=<optimized out>, arg=<optimized out>) at ../bgpd/bgp_updgrp_adv.c:260 FRRouting#15 0x000075709222c21a in hash_walk (hash=0x5e9e3d4390e0, func=func@entry=0x5e9e1158e3e0 <update_group_walkcb>, arg=arg@entry=0x7ffc88077be0) at ../lib/hash.c:270 FRRouting#16 0x00005e9e11591c77 in update_group_af_walk (bgp=bgp@entry=0x5e9e3d426eb0, afi=<optimized out>, safi=<optimized out>, cb=cb@entry=0x5e9e11592960 <group_announce_route_walkcb>, ctx=ctx@entry=0x7ffc88077c70) at ../bgpd/bgp_updgrp.c:2074 FRRouting#17 0x00005e9e115943e9 in group_announce_route (bgp=bgp@entry=0x5e9e3d426eb0, afi=afi@entry=AFI_L2VPN, safi=safi@entry=SAFI_EVPN, dest=dest@entry=0x5e9e3d45ca50, pi=pi@entry=0x5e9e3d465010) at ../bgpd/bgp_updgrp_adv.c:1119 FRRouting#18 0x00005e9e11562789 in bgp_process_main_one (bgp=bgp@entry=0x5e9e3d426eb0, dest=dest@entry=0x5e9e3d45ca50, afi=AFI_L2VPN, safi=SAFI_EVPN) at ../bgpd/bgp_route.c:3889 FRRouting#19 0x00005e9e11563088 in bgp_process_wq (wq=<optimized out>, data=0x5e9e3d467310) at ../bgpd/bgp_route.c:4015 FRRouting#20 0x000075709229eaa3 in work_queue_run (thread=0x7ffc88077ec0) at ../lib/workqueue.c:282 FRRouting#21 0x0000757092291d71 in event_call (thread=thread@entry=0x7ffc88077ec0) at ../lib/event.c:1996 FRRouting#22 0x000075709223a590 in frr_run (master=0x5e9e3cce2f10) at ../lib/libfrr.c:1232 FRRouting#23 0x00005e9e114e488e in main (argc=<optimized out>, argv=0x7ffc88078178) at ../bgpd/bgp_main.c:555 Indeed, the prefixes are complete garbage: (gdb) up FRRouting#7 0x00005e9e114e854b in overlay_index_same (a2=0x7ffc880779b0, a1=0x5e9e3cd16670) at ../bgpd/bgp_attr.h:632 (gdb) p/x a2->evpn_overlay->gw_ip $2 = {ipa_type = 0x20, ip = {addr = 0x0, addrbytes = {0x0, 0x0, 0x0, 0x0, 0x41, 0xd4, 0xe3, 0xe9, 0x5, 0x0, 0x0, 0x0, 0xed, 0x46, 0xb2, 0x24}, _v4_addr = {s_addr = 0x0}, _v6_addr = {__in6_u = {__u6_addr8 = {0x0, 0x0, 0x0, 0x0, 0x41, 0xd4, 0xe3, 0xe9, 0x5, 0x0, 0x0, 0x0, 0xed, 0x46, 0xb2, 0x24}, __u6_addr16 = {0x0, 0x0, 0xd441, 0xe9e3, 0x5, 0x0, 0x46ed, 0x24b2}, __u6_addr32 = {0x0, 0xe9e3d441, 0x5, 0x24b246ed}}}}} Fixes: 4ace11d ("bgpd: Move evpn_overlay to a pointer")
With soft reconfiguration, the BGP attributes are interned, but the EVPN attributes contained by the standard attributes are also interned. However, during BGP route processing, we performed a copy of the attributes in a new_attr struct, performing a shallow-copy. This made two structs point to the same interned EVPN attributes, freeing the attributes at the end of the input processing. Fix the double-free by increasing the refcount when shallow-copying the attributes. The direct symptom can be seen with a topotest, where bgpd segfaults on exit when cleaning up peer data: (gdb) bt FRRouting#12 0x00007fc57d6a8ff5 in malloc_printerr (str=str@entry=0x7fc57d7d18a0 "malloc_consolidate(): unaligned fastbin chunk detected") at ./malloc/malloc.c:5772 FRRouting#13 0x00007fc57d6a9d4c in malloc_consolidate (av=0x7fc57d803ac0 <main_arena>) at ./malloc/malloc.c:4846 FRRouting#14 0x00007fc57d6aada5 in _int_free_maybe_consolidate (av=0x7fc57d803ac0 <main_arena>, size=<optimized out>) at ./malloc/malloc.c:4779 FRRouting#15 0x00007fc57d6ab43a in _int_free (av=0x7fc57d803ac0 <main_arena>, p=<optimized out>, have_lock=<optimized out>) at ./malloc/malloc.c:4646 FRRouting#16 0x00007fc57d6addae in __GI___libc_free (mem=0x55704295e8a0) at ./malloc/malloc.c:3398 FRRouting#17 0x00007fc57dada55e in qfree (mt=mt@entry=0x7fc57dc34e60 <MTYPE_STREAM>, ptr=<optimized out>) at lib/memory.c:131 FRRouting#18 0x00007fc57db1b8f8 in stream_free (s=<optimized out>) at lib/stream.c:109 FRRouting#19 0x000055704186539e in sync_delete (subgrp=0x557042957f00) at bgpd/bgp_updgrp.c:108 FRRouting#20 update_subgroup_delete (subgrp=0x557042957f00) at bgpd/bgp_updgrp.c:1167 FRRouting#21 0x0000557041866c75 in update_subgroup_check_delete (subgrp=<optimized out>) at bgpd/bgp_updgrp.c:1202 FRRouting#22 0x00005570417fbf51 in update_group_remove_peer_afs (peer=<optimized out>) at ./bgpd/bgp_updgrp.h:523 FRRouting#23 bgp_stop (connection=<optimized out>) at bgpd/bgp_fsm.c:1478 FRRouting#24 0x0000557041800357 in bgp_event_update (connection=0x557042956b50, event=TCP_connection_closed) at bgpd/bgp_fsm.c:2655 FRRouting#25 0x00007fc57db28fae in event_call (thread=thread@entry=0x7ffe0c687760) at lib/event.c:2019 FRRouting#26 0x00007fc57daccb28 in frr_run (master=0x5570421106e0) at lib/libfrr.c:1247 FRRouting#27 0x00005570417b1fd3 in main (argc=<optimized out>, argv=0x7ffe0c687a28) at bgpd/bgp_main.c:557 Situation is even worse in real-world case where the route actually leaves to other peers, as the free'd memory will quickly get reallocated, trampled over, and trigger an assert on IP type (same one as the previous route-map patch): (gdb) bt FRRouting#4 0x00007570922b1569 in _zlog_assert_failed (xref=xref@entry=0x5e9e11716280 <_xref.1>, extra=extra@entry=0x0) at ../lib/zlog.c:767 FRRouting#5 0x00005e9e114f005e in ipaddr_cmp (b=<optimized out>, a=<optimized out>) at ../lib/ipaddr.h:153 FRRouting#6 bgp_route_evpn_same (e1=<optimized out>, e2=<optimized out>) at ../bgpd/bgp_attr_evpn.c:36 FRRouting#7 0x00005e9e114e854b in overlay_index_same (a2=0x7ffc880779b0, a1=0x5e9e3cd16670) at ../bgpd/bgp_attr.h:632 FRRouting#8 attrhash_cmp (p1=0x5e9e3cd16670, p2=0x7ffc880779b0) at ../bgpd/bgp_attr.c:921 FRRouting#9 0x000075709222bd93 in hash_get (hash=0x5e9e3d1a3d70, data=data@entry=0x7ffc880779b0, alloc_func=alloc_func@entry=0x5e9e114e78a0 <bgp_attr_hash_alloc>) at ../lib/hash.c:142 FRRouting#10 0x00005e9e114e89f4 in bgp_attr_intern (attr=attr@entry=0x7ffc880779b0) at ../bgpd/bgp_attr.c:1134 FRRouting#11 0x00005e9e11621443 in bgp_advertise_attr_intern (hash=0x5e9e3d45bdc0, attr=attr@entry=0x7ffc880779b0) at ../bgpd/bgp_advertise.c:106 FRRouting#12 0x00005e9e1159317d in bgp_adj_out_set_subgroup (dest=dest@entry=0x5e9e3d45ca50, subgrp=subgrp@entry=0x5e9e3d45bcc0, attr=attr@entry=0x7ffc880779b0, path=path@entry=0x5e9e3d465010) at ../bgpd/bgp_updgrp_adv.c:618 FRRouting#13 0x00005e9e115666f1 in subgroup_process_announce_selected (subgrp=subgrp@entry=0x5e9e3d45bcc0, selected=<optimized out>, dest=0x5e9e3d45ca50, afi=afi@entry=AFI_L2VPN, safi=safi@entry=SAFI_EVPN, addpath_tx_id=0) at ../bgpd/bgp_route.c:3362 FRRouting#14 0x00005e9e11592a1f in group_announce_route_walkcb (updgrp=<optimized out>, arg=<optimized out>) at ../bgpd/bgp_updgrp_adv.c:260 FRRouting#15 0x000075709222c21a in hash_walk (hash=0x5e9e3d4390e0, func=func@entry=0x5e9e1158e3e0 <update_group_walkcb>, arg=arg@entry=0x7ffc88077be0) at ../lib/hash.c:270 FRRouting#16 0x00005e9e11591c77 in update_group_af_walk (bgp=bgp@entry=0x5e9e3d426eb0, afi=<optimized out>, safi=<optimized out>, cb=cb@entry=0x5e9e11592960 <group_announce_route_walkcb>, ctx=ctx@entry=0x7ffc88077c70) at ../bgpd/bgp_updgrp.c:2074 FRRouting#17 0x00005e9e115943e9 in group_announce_route (bgp=bgp@entry=0x5e9e3d426eb0, afi=afi@entry=AFI_L2VPN, safi=safi@entry=SAFI_EVPN, dest=dest@entry=0x5e9e3d45ca50, pi=pi@entry=0x5e9e3d465010) at ../bgpd/bgp_updgrp_adv.c:1119 FRRouting#18 0x00005e9e11562789 in bgp_process_main_one (bgp=bgp@entry=0x5e9e3d426eb0, dest=dest@entry=0x5e9e3d45ca50, afi=AFI_L2VPN, safi=SAFI_EVPN) at ../bgpd/bgp_route.c:3889 FRRouting#19 0x00005e9e11563088 in bgp_process_wq (wq=<optimized out>, data=0x5e9e3d467310) at ../bgpd/bgp_route.c:4015 FRRouting#20 0x000075709229eaa3 in work_queue_run (thread=0x7ffc88077ec0) at ../lib/workqueue.c:282 FRRouting#21 0x0000757092291d71 in event_call (thread=thread@entry=0x7ffc88077ec0) at ../lib/event.c:1996 FRRouting#22 0x000075709223a590 in frr_run (master=0x5e9e3cce2f10) at ../lib/libfrr.c:1232 FRRouting#23 0x00005e9e114e488e in main (argc=<optimized out>, argv=0x7ffc88078178) at ../bgpd/bgp_main.c:555 Indeed, the prefixes are complete garbage: (gdb) up FRRouting#7 0x00005e9e114e854b in overlay_index_same (a2=0x7ffc880779b0, a1=0x5e9e3cd16670) at ../bgpd/bgp_attr.h:632 (gdb) p/x a2->evpn_overlay->gw_ip $2 = {ipa_type = 0x20, ip = {addr = 0x0, addrbytes = {0x0, 0x0, 0x0, 0x0, 0x41, 0xd4, 0xe3, 0xe9, 0x5, 0x0, 0x0, 0x0, 0xed, 0x46, 0xb2, 0x24}, _v4_addr = {s_addr = 0x0}, _v6_addr = {__in6_u = {__u6_addr8 = {0x0, 0x0, 0x0, 0x0, 0x41, 0xd4, 0xe3, 0xe9, 0x5, 0x0, 0x0, 0x0, 0xed, 0x46, 0xb2, 0x24}, __u6_addr16 = {0x0, 0x0, 0xd441, 0xe9e3, 0x5, 0x0, 0x46ed, 0x24b2}, __u6_addr32 = {0x0, 0xe9e3d441, 0x5, 0x24b246ed}}}}} Fixes: 4ace11d ("bgpd: Move evpn_overlay to a pointer") Signed-off-by: Tuetuopay <[email protected]>
Thursday Dec 08, 2016 at 17:52 GMT
Originally opened as https://github.com/opensourcerouting/cumulus-private_quagga/issues/9
Regression introduced by commit 6a3b35 ("Zebra: Handle IPv6 address status during initialization").
More specifically, link-local addresses might not meet the following condition on some kernel versions:
https://github.com/opensourcerouting/cumulus-private_quagga/commit/6a3b35#diff-219fcf863f5de80131a9fd6c16919be1R663
Kernel version where this problem is known to happen: 4.4.0-51-generic #72-Ubuntu
Kernel version where this problem is known not to happen: 3.13.0-77-generic #121-Ubuntu
The text was updated successfully, but these errors were encountered: