Deal with laptops with missing calibration data. #263
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
On newer cores, we need to explicitly set the subsystems to reset via the watchdog. Logic adapted from bcmdhd. Signed-off-by: Hector Martin <[email protected]>
Currently the pcie code multiplexes all register accesses through a single window. This isn't very efficient, and it creates race conditions when we access registers from multiple paths (e.g. in the interrupt handler). Since the chip has a dedicated window for the PCIe core registers, we can use that instead, avoid all the gratuitous window switching, and fix the IRQ race issues. Signed-off-by: Hector Martin <[email protected]>
Newer firmwares notify the host of boot completion via an MSI, so let's make sure that is initialized before booting the firmware. Signed-off-by: Hector Martin <[email protected]>
With secure boot, the vector is not accessible and trying to write it triggers PCIe errors. Skip it in that case. Signed-off-by: Hector Martin <[email protected]>
Make sure the firmware can't get any early notifications by masking all IRQs explicitly before loading the firmware. Signed-off-by: Hector Martin <[email protected]>
This is essentially identical to SCAN_V2 with an extra field where we had a padding byte, so don't bother duplicating the entire structure. Just add the field and the logic to set the version properly. Signed-off-by: Hector Martin <[email protected]>
This extended command supports bit set/clear operations, but we just use it like the old full mask set command. Signed-off-by: Hector Martin <[email protected]>
The structures are compatible and just add fields, so we can just treat it as always v112. If we start using new fields, that will have to be gated on the version. Signed-off-by: Hector Martin <[email protected]>
New firmware wants extra fields, hopefully old firmware ignores them. Signed-off-by: Hector Martin <[email protected]>
Signed-off-by: Hector Martin <[email protected]>
Fix access point mode by bringing firmware into appropriate state before setting up the device. Signed-off-by: Patrick Blass <[email protected]>
This patch fixes the firmware memory map structure to be complete. Along the way, we fix a failure to align the heap memory start address, which causes failures with the newest apple wifi firmware. With this patch, we can load the latest (sonoma 14.0 as of right now) apple wifi firmware. Signed-off-by: Daniel Berlin <[email protected]>
This patch adds support for 6G chanspecs, as part of adding 6G and 802.11ax support. Signed-off-by: Daniel Berlin <[email protected]>
1. Correct VHT MCS settings to support as many tx/rx streams as chip does. 2. Correct VHT capabilities to support what all chips do. 3. Correct max AMPDU capabilities for VHT. 4. Support LDPC and STBC in VHT where available. Signed-off-by: Daniel Berlin <[email protected]>
…tructure. Signed-off-by: Daniel Berlin <[email protected]>
This patch adds support for using GCMP/etc during offload where supported by the firmware. Signed-off-by: Daniel Berlin <[email protected]>
We may just have had to clone a packet, and not actually have run out of headroom. Only issue warning about headroom when we actually ran out of headroom. This removes useless spam about needing 0 more bytes of headroom. Signed-off-by: Daniel Berlin <[email protected]>
This patch adds support for handling the scan flags that come from the 802.11 stack. This enables the stack to control whether we are doing high/low power scans, as well as other options. Signed-off-by: Daniel Berlin <[email protected]>
This patch adds support for 6G bands, along with HE capabilities, as they are required to register 6G bands with wiphy. This in turn, enables 802.11ax support for the other bands. Scanning is not updated in this patch, so the bands are unused except to be able to process what the firmware tells us. Existing code is updated to handle all the bands rather than just 2g and 5g channels. Signed-off-by: Daniel Berlin <[email protected]>
Currently, we ignore the default country in the reg notifier. We also register a custom regulatory domain, which is set as the default. As a result, the chip is likely to be set to the correct country, but the regulatory domain will not match it. When the regulatory notifier is then called, we see the countries are the same and do not change anything, even though the domain is wrong. This patch forces us to reset the bands on the first country change even if the chip is already set to that country. We also restore the original band info before reconstructing channel info, as the new regdom power limits may be higher than what is currently set. Signed-off-by: Daniel Berlin <[email protected]>
Signed-off-by: Daniel Berlin <[email protected]>
Signed-off-by: Daniel Berlin <[email protected]>
This patch structurizes PNF scan handling, adding support for netinfo v3 and PNO v3 structures. This in turn, enables the chip to tell us about 6G scan results, as the results contain chanspecs and not just channels. Signed-off-by: Daniel Berlin <[email protected]>
Signed-off-by: Daniel Berlin <[email protected]>
To support new join parameter versions, we move to using a function pointer structure that knows how to deal with the different versions of structures Drive-by fix: Always count the assoc_params length even if no bssid is provided. It doesn't make sense to truncate it off, since we need to set the bssid to the broadcast addr anyway in that case. Signed-off-by: Hector Martin <[email protected]> Signed-off-by: Daniel Berlin <[email protected]>
handle the interface versions we find. Signed-off-by: Daniel Berlin <[email protected]>
This adds support for more authentication types during roaming offload, enabling the firmware to handle roaming for ~all authentication types. Signed-off-by: Daniel Berlin <[email protected]>
Signed-off-by: Daniel Berlin <[email protected]>
We try to retrieve a newer sta_info structure that has both rx and tx ratespecs, but if we don't get the structure we are expecting we fall back to tx rate info only. Signed-off-by: Daniel Berlin <[email protected]>
Signed-off-by: Asahi Lina <[email protected]>
Signed-off-by: Asahi Lina <[email protected]>
Eventually this can be used to extend the structure at the end backwards-compatibly, for cases where we missed core fields in the UAPI. More discrete features should be implemented via extensions. Signed-off-by: Asahi Lina <[email protected]>
|
merged into https://github.com/jannau/linux/tree/beta-6.8/asahi-wip, thanks |
|
This is now available in asahi-wip |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Apparently you can just not send it.