autotest: set parameter value so context pop resets it #42886
peterbarkertest_sitl_copter.yml
on: push
Matrix: build
build-gcc-heli
3m 57s
Matrix: autotest
Matrix: autotest-heli
Annotations
10 errors and 7 warnings
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6170
vehicle_test_suite.NotAchievedException: Double-notch peak was higher than single-notch peak -24.489825dB > -26.464961dB
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6194
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6170, in DynamicNotches
|
|
autotest (sitltest-copter-tests2b)
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Double-notch peak was higher than single-notch peak -24.489825dB > -26.464961dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-1.txt)
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6170
vehicle_test_suite.NotAchievedException: Double-notch peak was higher than single-notch peak -26.316803dB > -27.743006dB
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6194
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6170, in DynamicNotches
|
|
autotest (sitltest-copter-tests2b)
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Double-notch peak was higher than single-notch peak -26.316803dB > -27.743006dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-2.txt)
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6170
vehicle_test_suite.NotAchievedException: Double-notch peak was higher than single-notch peak -26.650407dB > -28.314912dB
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L6194
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6170, in DynamicNotches
|
|
autotest (sitltest-copter-tests2b)
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Double-notch peak was higher than single-notch peak -26.650407dB > -28.314912dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-3.txt)
|
|
autotest (sitltest-copter-tests2b):
Tools/autotest/arducopter.py#L9615
vehicle_test_suite.NotAchievedException: Blended diverged n=0 measurements[0][n]=12.373879432678223 measurements[1][n]=14.517227172851562 measurements[2][n]=13.425457000732422 error=0.020096302032470703
|
|
autotest (sitltest-copter-tests1a)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests1b)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests1e)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests2a)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests1d)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests1c)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
|
autotest (sitltest-copter-tests2b)
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
Artifacts
Produced during runtime
| Name | Size | |
|---|---|---|
|
BIN-sitltest-copter-tests1a
|
28.1 MB |
|
|
BIN-sitltest-copter-tests1b
|
25.6 MB |
|
|
BIN-sitltest-copter-tests1c
|
38.9 MB |
|
|
BIN-sitltest-copter-tests1d
|
46.6 MB |
|
|
BIN-sitltest-copter-tests1e
|
40.4 MB |
|
|
BIN-sitltest-copter-tests2a
|
19.7 MB |
|
|
BIN-sitltest-heli
|
56.6 MB |
|
|
fail-sitltest-copter-tests2b
|
258 MB |
|