netpoll: Close race condition between poll_one_napi and napi_disable

Drivers might call napi_disable while not holding the napi instance poll_lock.
In those instances, its possible for a race condition to exist between
poll_one_napi and napi_disable.  That is to say, poll_one_napi only tests the
NAPI_STATE_SCHED bit to see if there is work to do during a poll, and as such
the following may happen:

CPU0				CPU1
ndo_tx_timeout			napi_poll_dev
 napi_disable			 poll_one_napi
  test_and_set_bit (ret 0)
				  test_bit (ret 1)
   reset adapter		   napi_poll_routine

If the adapter gets a tx timeout without a napi instance scheduled, its possible
for the adapter to think it has exclusive access to the hardware  (as the napi
instance is now scheduled via the napi_disable call), while the netpoll code
thinks there is simply work to do.  The result is parallel hardware access
leading to corrupt data structures in the driver, and a crash.

Additionaly, there is another, more critical race between netpoll and
napi_disable.  The disabled napi state is actually identical to the scheduled
state for a given napi instance.  The implication being that, if a napi instance
is disabled, a netconsole instance would see the napi state of the device as
having been scheduled, and poll it, likely while the driver was dong something
requiring exclusive access.  In the case above, its fairly clear that not having
the rings in a state ready to be polled will cause any number of crashes.

The fix should be pretty easy.  netpoll uses its own bit to indicate that that
the napi instance is in a state of being serviced by netpoll (NAPI_STATE_NPSVC).
We can just gate disabling on that bit as well as the sched bit.  That should
prevent netpoll from conducting a napi poll if we convert its set bit to a
test_and_set_bit operation to provide mutual exclusion

Change notes:
V2)
	Remove a trailing whtiespace
	Resubmit with proper subject prefix

V3)
	Clean up spacing nits

Signed-off-by: Neil Horman <[email protected]>
CC: "David S. Miller" <[email protected]>
CC: [email protected]
Tested-by: [email protected]
Signed-off-by: David S. Miller <[email protected]>

Author: Neil Horman

include/linux/netdevice.h

@@ -507,6 +507,7 @@ static inline void napi_enable(struct napi_struct *n)
 	BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
 	smp_mb__before_atomic();
 	clear_bit(NAPI_STATE_SCHED, &n->state);
+	clear_bit(NAPI_STATE_NPSVC, &n->state);
 }
 
 #ifdef CONFIG_SMP

net/core/dev.c

@@ -4713,6 +4713,8 @@ void napi_disable(struct napi_struct *n)
 
 	while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
 		msleep(1);
+	while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
+		msleep(1);
 
 	hrtimer_cancel(&n->timer);
 

net/core/netpoll.c

@@ -142,7 +142,7 @@ static void queue_process(struct work_struct *work)
  */
 static int poll_one_napi(struct napi_struct *napi, int budget)
 {
-	int work;
+	int work = 0;
 
 	/* net_rx_action's ->poll() invocations and our's are
 	 * synchronized by this test which is only made while
@@ -151,14 +151,20 @@ static int poll_one_napi(struct napi_struct *napi, int budget)
 	if (!test_bit(NAPI_STATE_SCHED, &napi->state))
 		return budget;
 
-	set_bit(NAPI_STATE_NPSVC, &napi->state);
+	/* If we set this bit but see that it has already been set,
+	 * that indicates that napi has been disabled and we need
+	 * to abort this operation
+	 */
+	if (test_and_set_bit(NAPI_STATE_NPSVC, &napi->state))
+		goto out;
 
 	work = napi->poll(napi, budget);
 	WARN_ONCE(work > budget, "%pF exceeded budget in poll\n", napi->poll);
 	trace_napi_poll(napi);
 
 	clear_bit(NAPI_STATE_NPSVC, &napi->state);
 
+out:
 	return budget - work;
 }