Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

NVS: Nothing saved. key:xxxxxxxxxxxx #44

Open
baaskaas opened this issue May 30, 2019 · 10 comments
Open

NVS: Nothing saved. key:xxxxxxxxxxxx #44

baaskaas opened this issue May 30, 2019 · 10 comments

Comments

@baaskaas
Copy link

baaskaas commented May 30, 2019 •
edited
Loading

Hello, trying out the basic switch tutorial before results in this error.
I just eddited my wifi credentials. As you can see it is connected. Right after that the system fails. Maybe i got the wrong package of something?
maybe a wrong setting in the config?

I don't seem to get whats wrong.

here is the log:

`ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:6380
load:0x40078000,len:11304
load:0x40080400,len:6700
entry 0x40080764
I (29) boot: ESP-IDF v4.0-dev-667-gda13efc17 2nd stage bootloader
I (29) boot: compile time 17:43:10
I (29) boot: Enabling RNG early entropy source...
I (35) boot: SPI Speed : 40MHz
I (39) boot: SPI Mode : DIO
I (43) boot: SPI Flash Size : 4MB
I (47) boot: Partition Table:
I (51) boot: ## Label Usage Type ST Offset Length
I (58) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (66) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (73) boot: 2 factory factory app 00 00 00010000 00100000
I (81) boot: End of partition table
I (85) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x24598 (148888) map
I (146) esp_image: segment 1: paddr=0x000345c0 vaddr=0x3ffb0000 size=0x0306c ( 12396) load
I (151) esp_image: segment 2: paddr=0x00037634 vaddr=0x40080000 size=0x00400 ( 1024) load
0x40080000: _WindowOverflow4 at /Users/user/esp/esp-idf/components/freertos/xtensa_vectors.S:1779

I (153) esp_image: segment 3: paddr=0x00037a3c vaddr=0x40080400 size=0x085d4 ( 34260) load
I (176) esp_image: segment 4: paddr=0x00040018 vaddr=0x400d0018 size=0x8e734 (583476) map
0x400d0018: _stext at ??:?

I (380) esp_image: segment 5: paddr=0x000ce754 vaddr=0x400889d4 size=0x072bc ( 29372) load
0x400889d4: ppSearchTxQueue at ??:?

I (402) boot: Loaded app from partition at offset 0x10000
I (402) boot: Disabling RNG early entropy source...
I (403) cpu_start: Pro cpu up.
I (406) cpu_start: Application information:
I (411) cpu_start: Project name: app-template
I (417) cpu_start: App version: v1.0.1-21-gfb7392d-dirty
I (423) cpu_start: Compile time: May 30 2019 17:43:12
I (429) cpu_start: ELF file SHA256: 40afeca62a0ea8fe...
I (435) cpu_start: ESP-IDF: v4.0-dev-667-gda13efc17
I (441) cpu_start: Starting app cpu, entry point is 0x4008105c
0x4008105c: call_start_cpu1 at /Users/user/esp/esp-idf/components/esp32/cpu_start.c:267

I (434) cpu_start: App cpu up.
I (452) heap_init: Initializing. RAM available for dynamic allocation:
I (459) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (465) heap_init: At 3FFB96C8 len 00026938 (154 KiB): DRAM
I (471) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (478) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (484) heap_init: At 4008FC90 len 00010370 (64 KiB): IRAM
I (490) cpu_start: Pro cpu start user code
I (173) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (273) wifi: wifi driver task: 3ffc10c8, prio:23, stack:3584, core=0
I (273) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (273) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (303) wifi: wifi firmware version: e11ccc4
I (303) wifi: config NVS flash: enabled
I (303) wifi: config nano formating: disabled
I (303) wifi: Init dynamic tx buffer num: 32
I (303) wifi: Init data frame dynamic rx buffer num: 32
I (313) wifi: Init management frame dynamic rx buffer num: 32
I (313) wifi: Init management short buffer num: 32
I (323) wifi: Init static rx buffer size: 1600
I (323) wifi: Init static rx buffer num: 10
I (333) wifi: Init dynamic rx buffer num: 32
I (433) phy: phy_version: 4100, 2a5dd04, Jan 23 2019, 21:00:07, 0, 0
I (433) wifi: mode : sta (30:ae:a4:0a:6c:5c)
I (433) SWITCH: wifi_init_sta finished.
I (443) SWITCH: connect to ap SSID:TjeppieNet password:boem1234
I (803) wifi: new:<13,0>, old:<1,0>, ap:<255,255>, sta:<13,0>, prof:1
I (803) wifi: state: init -> auth (b0)
I (803) wifi: state: auth -> assoc (0)
I (813) wifi: state: assoc -> run (10)
I (853) wifi: connected with TjeppieNet, channel 13, bssid = c4:ea:1d:e1:c2:bf
I (853) wifi: pm start, type: 1

I (1753) tcpip_adapter: sta ip: 192.168.1.98, mask: 255.255.255.0, gw: 192.168.1.1
I (1753) SWITCH: got ip:192.168.1.98
E (1753) nvs: nothing saved. key:30AEA40A6C5CD0

E (1763) nvs: nothing saved. key:30AEA40A6C5CD1

E (1763) nvs: nothing saved. key:30AEA40A6C5CD2

E (1773) nvs: nothing saved. key:30AEA40A6C5CD3

E (1773) nvs: nothing saved. key:30AEA40A6C5CD4

E (1783) nvs: nothing saved. key:30AEA40A6C5CD5

E (1783) nvs: nothing saved. key:30AEA40A6C5CD6

E (1793) nvs: nothing saved. key:30AEA40A6C5CD7

/Users/user/esp/esp-idf/components/freertos/queue.c:729 (xQueueGenericSend)- assert failed!
abort() was called at PC 0x4008bfa7 on core 0
0x4008bfa7: xQueueGenericSend at /Users/user/esp/esp-idf/components/freertos/queue.c:2044

ELF file SHA256: 40afeca62a0ea8fe77c03ebc9afc0c8d4178b9d75d5dfeb05e9b1d8b9df98685

Backtrace: 0x40087b94:0x3ffbf520 0x40087de1:0x3ffbf540 0x4008bfa7:0x3ffbf560 0x400e9dc9:0x3ffbf5a0 0x400e9bed:0x3ffbf5d0 0x400d33d2:0x3ffbf660 0x401008d9:0x3ffbf6c0 0x4015d6aa:0x3ffbf6e0 0x40101131:0x3ffbf710 0x401011f1:0x3ffbf750 0x4008ba15:0x3ffbf770
0x40087b94: invoke_abort at /Users/user/esp/esp-idf/components/esp32/panic.c:716

0x40087de1: abort at /Users/user/esp/esp-idf/components/esp32/panic.c:716

0x4008bfa7: xQueueGenericSend at /Users/user/esp/esp-idf/components/freertos/queue.c:2044

0x400e9dc9: httpd_bind at /Users/user/esp/esp32-homekit/src/httpd.c:83

0x400e9bed: hap_accessory_register at /Users/user/esp/esp32-homekit/src/hap.c:470

0x400d33d2: event_handler at /Users/user/esp/esp32-homekit/examples/switch/main/main.c:128 (discriminator 9)

0x401008d9: esp_event_post_to_user at /Users/user/esp/esp-idf/components/esp_event/event_loop_legacy.c:44

0x4015d6aa: handler_execute at /Users/user/esp/esp-idf/components/esp_event/esp_event.c:145

0x40101131: esp_event_loop_run at /Users/user/esp/esp-idf/components/esp_event/esp_event.c:641

0x401011f1: esp_event_loop_run_task at /Users/user/esp/esp-idf/components/esp_event/esp_event.c:641

0x4008ba15: vPortTaskWrapper at /Users/user/esp/esp-idf/components/freertos/port.c:403

Rebooting...
ets Jun 8 2016 00:22:57`
@baaskaas
Copy link
Author

Lol Fixed it.
I was on ESP-IDF v4.0-dev-667-gda13efc17
Now on:
v3.2
thats what it said.
i downgraded by removing the esp-idf folder and then following this guide to get the esp-idf from github
https://docs.espressif.com/projects/esp-idf/en/stable/get-started/index.html#get-started-get-esp-idf

On MacOS 10.14.5

@cryptonus
Copy link

/home/pranay/esp/xtensa-esp32-elf/xtensa-esp32-elf/sys-include/stdlib.h:155:44: error: expected initializer before '__result_use_check'
void *reallocarray(void *, size_t, size_t) __result_use_check __alloc_size(2)
^~~~~~~~~~~~~~~~~~
/home/pranay/esp/xtensa-esp32-elf/xtensa-esp32-elf/sys-include/stdlib.h:340:52: error: expected initializer before '__alloc_align'
void * aligned_alloc(size_t, size_t) __malloc_like __alloc_align(1)
^~~~~~~~~~~~~
/home/pranay/esp/esp-idf/make/component_wrapper.mk:285: recipe for target 'asio/asio/src/asio.o' failed
make[1]: *** [asio/asio/src/asio.o] Error 1
/home/pranay/esp/esp-idf/make/project.mk:530: recipe for target 'component-asio-build' failed
make: *** [component-asio-build] Error 2

This error occurs while make after downgrading esp-idf now what to do

@Xanadu1220
Copy link

Have the same question 😭😭😭 How to solve it?

@cryptonus
Copy link

This is because of following two guides at same time both esp-idf guide have different process of installation so , Delete all your previous installed file and start again by following this guide given below :

https://docs.espressif.com/projects/esp-idf/en/stable/get-started/linux-setup.html

After that error is fixed

@Xanadu1220
Copy link

This is so weird QAQ
After it, still come out !!!

@Xanadu1220
Copy link

what should I config of main.c ? Just #if 1
#define EXAMPLE_ESP_WIFI_SSID "XXX"
#define EXAMPLE_ESP_WIFI_PASS "XXX"
???

@cryptonus
Copy link

Write your WiFi router name (ssid) and password in the place of XXX

@Xanadu1220
Copy link

Thanks bro ! I Done !!!!

@rillhu
Copy link

rillhu commented Apr 9, 2020

you should select the right ESP-IDF version. you can also refer to https://github.com/rillhu/esp32-homekit, which I made some update based on this repo.

@jondthompson
Copy link

What would be needed to update the project for esp-idf4?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
5 participants
@rillhu @jondthompson @baaskaas @Xanadu1220 @cryptonus