flattenBridgeL1.sol

// Sources flattened with hardhat v2.7.1 https://hardhat.org

// File @openzeppelin/contracts/utils/EnumerableSet.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint160(uint256(_at(set._inner, index))));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}


// File @openzeppelin/contracts/utils/Address.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}


// File @openzeppelin/contracts/utils/Context.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}


// File @openzeppelin/contracts/access/AccessControl.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;



/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context {
    using EnumerableSet for EnumerableSet.AddressSet;
    using Address for address;

    struct RoleData {
        EnumerableSet.AddressSet members;
        bytes32 adminRole;
    }

    mapping (bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view returns (bool) {
        return _roles[role].members.contains(account);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view returns (uint256) {
        return _roles[role].members.length();
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
        return _roles[role].members.at(index);
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");

        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");

        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
        _roles[role].adminRole = adminRole;
    }

    function _grantRole(bytes32 role, address account) private {
        if (_roles[role].members.add(account)) {
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (_roles[role].members.remove(account)) {
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}


// File contracts/interfaces/IDepositExecute.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
    @title Interface for handler contracts that support deposits and deposit executions.
    @author ChainSafe Systems.
 */
interface IDepositExecute {

    enum HandleTypes {ERC20, WETH, ERC721,GENERIC}

    /**
        @notice It is intended that deposit are made using the Bridge contract.
        @param destinationChainID Chain ID deposit is expected to be bridged to.
        @param depositNonce This value is generated as an ID by the Bridge contract.
        @param depositer Address of account making the deposit in the Bridge contract.
        @param data Consists of additional data needed for a specific deposit.
     */
    //function deposit(bytes32 resourceID, uint8 destinationChainID, uint64 depositNonce, address depositer, bytes calldata data) external;



    /**
        @notice It is intended that deposit are made using the Bridge contract.
        @param destinationChainID Chain ID deposit is expected to be bridged to.
        @param depositNonce This value is generated as an ID by the Bridge contract.
        @param depositer Address of account making the deposit in the Bridge contract.
        @param data Consists of additional data needed for a specific deposit.
     */
    //function depositWethAndERC20(bytes32 resourceID, uint8 destinationChainID, uint64 depositNonce, address depositer, bytes calldata data) external;

    /**
        @notice It is intended that proposals are executed by the Bridge contract.
        @param data Consists of additional data needed for a specific deposit execution.
     */
    function executeProposal(bytes32 resourceID, bytes calldata data) external returns(uint256);


    /**
        @notice get function type of contract 
     */
    function getType() external pure returns(HandleTypes);

}


// File contracts/interfaces/IBridge.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
    @title Interface for Bridge contract.
    @author ChainSafe Systems.
 */
interface IBridge {
    /**
        @notice Exposing getter for {_chainID} instead of forcing the use of call.
        @return uint8 The {_chainID} that is currently set for the Bridge contract.
     */
    function _chainID() external returns (uint8);
}


// File contracts/interfaces/IERCHandler.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
    @title Interface to be used with handlers that support ERC20s and ERC721s.
    @author ChainSafe Systems.
 */
interface IERCHandler {
    /**
        @notice Correlates {resourceID} with {contractAddress}.
        @param resourceID ResourceID to be used when making deposits.
        @param contractAddress Address of contract to be called when a deposit is made and a deposited is executed.
     */
    function setResource(bytes32 resourceID, address contractAddress) external;
    /**
        @notice Marks {contractAddress} as mintable/burnable.
        @param contractAddress Address of contract to be used when making or executing deposits.
     */
    function setBurnable(address contractAddress) external;
    /**
        @notice Used to manually release funds from ERC safes.
        @param tokenAddress Address of token contract to release.
        @param recipient Address to release tokens to.
        @param amountOrTokenID Either the amount of ERC20 tokens or the ERC721 token ID to release.
     */
    function withdraw(address tokenAddress, address recipient, uint256 amountOrTokenID) external;
}


// File contracts/interfaces/IGenericHandler.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
    @title Interface for handler that handles generic deposits and deposit executions.
    @author ChainSafe Systems.
 */
interface IGenericHandler {
    /**
        @notice Correlates {resourceID} with {contractAddress}, {depositFunctionSig}, and {executeFunctionSig}.
        @param resourceID ResourceID to be used when making deposits.
        @param contractAddress Address of contract to be called when a deposit is made and a deposited is executed.
        @param depositFunctionSig Function signature of method to be called in {contractAddress} when a deposit is made.
        @param executeFunctionSig Function signature of method to be called in {contractAddress} when a deposit is executed.
     */
    function setResource(bytes32 resourceID, address contractAddress, bytes4 depositFunctionSig, bytes4 executeFunctionSig) external;
}


// File contracts/utils/BytesToTypes.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @title BytesToTypes
 * @dev The BytesToTypes contract converts the memory byte arrays to the standard solidity types
 * @author pouladzade@gmail.com
 */

contract BytesToTypes {
    

    function bytesToAddress(uint _offst, bytes memory _input) internal pure returns (address _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 
    
    function bytesToBool(uint _offst, bytes memory _input) internal pure returns (bool _output) {
        
        uint8 x;
        assembly {
            x := mload(add(_input, _offst))
        }
        x==0 ? _output = false : _output = true;
    }   
        
    function getStringSize(uint _offst, bytes memory _input) internal pure returns(uint size){
        
        assembly{
            
            size := mload(add(_input,_offst))
            let chunk_count := add(div(size,32),1) // chunk_count = size/32 + 1
            
            if gt(mod(size,32),0) {// if size%32 > 0
                chunk_count := add(chunk_count,1)
            } 
            
             size := mul(chunk_count,32)// first 32 bytes reseves for size in strings
        }
    }

    function bytesToString(uint _offst, bytes memory _input, bytes memory _output) internal pure {

        uint size = 32;
        assembly {
            
            let chunk_count
            
            size := mload(add(_input,_offst))
            chunk_count := add(div(size,32),1) // chunk_count = size/32 + 1
            
            if gt(mod(size,32),0) {
                chunk_count := add(chunk_count,1)  // chunk_count++
            }
               
            for { let index:= 0 }  lt(index , chunk_count){ index := add(index,1) } {
                mstore(add(_output,mul(index,32)),mload(add(_input,_offst)))
                _offst := sub(_offst,32)           // _offst -= 32
            }
        }
    }

    function bytesToBytes32(uint _offst, bytes memory  _input, bytes32 _output) internal pure {
        
        assembly {
            mstore(_output , add(_input, _offst))
            mstore(add(_output,32) , add(add(_input, _offst),32))
        }
    }
    
    function bytesToInt8(uint _offst, bytes memory  _input) internal pure returns (int8 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }
    
    function bytesToInt16(uint _offst, bytes memory _input) internal pure returns (int16 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt24(uint _offst, bytes memory _input) internal pure returns (int24 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt32(uint _offst, bytes memory _input) internal pure returns (int32 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt40(uint _offst, bytes memory _input) internal pure returns (int40 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt48(uint _offst, bytes memory _input) internal pure returns (int48 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt56(uint _offst, bytes memory _input) internal pure returns (int56 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt64(uint _offst, bytes memory _input) internal pure returns (int64 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt72(uint _offst, bytes memory _input) internal pure returns (int72 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt80(uint _offst, bytes memory _input) internal pure returns (int80 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt88(uint _offst, bytes memory _input) internal pure returns (int88 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt96(uint _offst, bytes memory _input) internal pure returns (int96 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }
	
	function bytesToInt104(uint _offst, bytes memory _input) internal pure returns (int104 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }
    
    function bytesToInt112(uint _offst, bytes memory _input) internal pure returns (int112 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt120(uint _offst, bytes memory _input) internal pure returns (int120 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt128(uint _offst, bytes memory _input) internal pure returns (int128 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt136(uint _offst, bytes memory _input) internal pure returns (int136 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt144(uint _offst, bytes memory _input) internal pure returns (int144 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt152(uint _offst, bytes memory _input) internal pure returns (int152 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt160(uint _offst, bytes memory _input) internal pure returns (int160 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt168(uint _offst, bytes memory _input) internal pure returns (int168 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt176(uint _offst, bytes memory _input) internal pure returns (int176 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt184(uint _offst, bytes memory _input) internal pure returns (int184 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt192(uint _offst, bytes memory _input) internal pure returns (int192 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt200(uint _offst, bytes memory _input) internal pure returns (int200 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt208(uint _offst, bytes memory _input) internal pure returns (int208 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt216(uint _offst, bytes memory _input) internal pure returns (int216 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt224(uint _offst, bytes memory _input) internal pure returns (int224 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt232(uint _offst, bytes memory _input) internal pure returns (int232 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt240(uint _offst, bytes memory _input) internal pure returns (int240 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt248(uint _offst, bytes memory _input) internal pure returns (int248 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

    function bytesToInt256(uint _offst, bytes memory _input) internal pure returns (int256 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    }

	function bytesToUint8(uint _offst, bytes memory _input) internal pure returns (uint8 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

	function bytesToUint16(uint _offst, bytes memory _input) internal pure returns (uint16 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

	function bytesToUint24(uint _offst, bytes memory _input) internal pure returns (uint24 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

	function bytesToUint32(uint _offst, bytes memory _input) internal pure returns (uint32 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

	function bytesToUint40(uint _offst, bytes memory _input) internal pure returns (uint40 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

	function bytesToUint48(uint _offst, bytes memory _input) internal pure returns (uint48 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

	function bytesToUint56(uint _offst, bytes memory _input) internal pure returns (uint56 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

	function bytesToUint64(uint _offst, bytes memory _input) internal pure returns (uint64 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

	function bytesToUint72(uint _offst, bytes memory _input) internal pure returns (uint72 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

	function bytesToUint80(uint _offst, bytes memory _input) internal pure returns (uint80 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

	function bytesToUint88(uint _offst, bytes memory _input) internal pure returns (uint88 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

	function bytesToUint96(uint _offst, bytes memory _input) internal pure returns (uint96 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 
	
	function bytesToUint104(uint _offst, bytes memory _input) internal pure returns (uint104 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint112(uint _offst, bytes memory _input) internal pure returns (uint112 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint120(uint _offst, bytes memory _input) internal pure returns (uint120 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint128(uint _offst, bytes memory _input) internal pure returns (uint128 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint136(uint _offst, bytes memory _input) internal pure returns (uint136 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint144(uint _offst, bytes memory _input) internal pure returns (uint144 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint152(uint _offst, bytes memory _input) internal pure returns (uint152 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint160(uint _offst, bytes memory _input) internal pure returns (uint160 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint168(uint _offst, bytes memory _input) internal pure returns (uint168 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint176(uint _offst, bytes memory _input) internal pure returns (uint176 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint184(uint _offst, bytes memory _input) internal pure returns (uint184 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint192(uint _offst, bytes memory _input) internal pure returns (uint192 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint200(uint _offst, bytes memory _input) internal pure returns (uint200 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint208(uint _offst, bytes memory _input) internal pure returns (uint208 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint216(uint _offst, bytes memory _input) internal pure returns (uint216 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint224(uint _offst, bytes memory _input) internal pure returns (uint224 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint232(uint _offst, bytes memory _input) internal pure returns (uint232 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint240(uint _offst, bytes memory _input) internal pure returns (uint240 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint248(uint _offst, bytes memory _input) internal pure returns (uint248 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 

    function bytesToUint256(uint _offst, bytes memory _input) internal pure returns (uint256 _output) {
        
        assembly {
            _output := mload(add(_input, _offst))
        }
    } 
    
}


// File contracts/utils/TypesToBytes.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @title TypesToBytes
 * @dev The TypesToBytes contract converts the standard solidity types to the byte array
 * @author pouladzade@gmail.com
 */

contract TypesToBytes {
 
    constructor() internal {
        
    }
    function addressToBytes(uint _offst, address _input, bytes memory _output) internal pure {

        assembly {
            mstore(add(_output, _offst), _input)
        }
    }

    function bytes32ToBytes(uint _offst, bytes32 _input, bytes memory _output) internal pure {

        assembly {
            mstore(add(_output, _offst), _input)
            mstore(add(add(_output, _offst),32), add(_input,32))
        }
    }
    
    function boolToBytes(uint _offst, bool _input, bytes memory _output) internal pure {
        uint8 x = _input == false ? 0 : 1;
        assembly {
            mstore(add(_output, _offst), x)
        }
    }
    
    function stringToBytes(uint _offst, bytes memory _input, bytes memory _output) internal pure {
        uint256 stack_size = _input.length / 32;
        if(_input.length % 32 > 0) stack_size++;
        
        assembly {
            stack_size := add(stack_size,1)//adding because of 32 first bytes memory as the length
            for { let index := 0 } lt(index,stack_size){ index := add(index ,1) } {
                mstore(add(_output, _offst), mload(add(_input,mul(index,32))))
                _offst := sub(_offst , 32)
            }
        }
    }

    function intToBytes(uint _offst, int _input, bytes memory  _output) internal pure {

        assembly {
            mstore(add(_output, _offst), _input)
        }
    } 
    
    function uintToBytes(uint _offst, uint _input, bytes memory _output) internal pure {

        assembly {
            mstore(add(_output, _offst), _input)
        }
    }

}


// File contracts/utils/SizeOf.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @title SizeOf
 * @dev The SizeOf return the size of the solidity types in byte
 * @author pouladzade@gmail.com
 */

contract  SizeOf {
    
    function sizeOfString(string memory _in) internal pure  returns(uint _size){
        _size = bytes(_in).length / 32;
         if(bytes(_in).length % 32 != 0) 
            _size++;
            
        _size++; // first 32 bytes is reserved for the size of the string     
        _size *= 32;
    }

    function sizeOfInt(uint16 _postfix) internal pure  returns(uint size){

        assembly{
            switch _postfix
                case 8 { size := 1 }
                case 16 { size := 2 }
                case 24 { size := 3 }
                case 32 { size := 4 }
                case 40 { size := 5 }
                case 48 { size := 6 }
                case 56 { size := 7 }
                case 64 { size := 8 }
                case 72 { size := 9 }
                case 80 { size := 10 }
                case 88 { size := 11 }
                case 96 { size := 12 }
                case 104 { size := 13 }
                case 112 { size := 14 }
                case 120 { size := 15 }
                case 128 { size := 16 }
                case 136 { size := 17 }
                case 144 { size := 18 }
                case 152 { size := 19 }
                case 160 { size := 20 }
                case 168 { size := 21 }
                case 176 { size := 22 }
                case 184 { size := 23 }
                case 192 { size := 24 }
                case 200 { size := 25 }
                case 208 { size := 26 }
                case 216 { size := 27 }
                case 224 { size := 28 }
                case 232 { size := 29 }
                case 240 { size := 30 }
                case 248 { size := 31 }
                case 256 { size := 32 }
                default  { size := 32 }
        }

    }
    
    function sizeOfUint(uint16 _postfix) internal pure  returns(uint size){
        return sizeOfInt(_postfix);
    }

    function sizeOfAddress() internal pure  returns(uint8){
        return 20; 
    }
    
    function sizeOfBool() internal pure  returns(uint8){
        return 1; 
    }
    

}


// File contracts/utils/Seriality.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

/**
 * @title Seriality
 * @dev The Seriality contract is the main interface for serializing data using the TypeToBytes, BytesToType and SizeOf
 * @author pouladzade@gmail.com
 */



contract Seriality is BytesToTypes, TypesToBytes, SizeOf {

    constructor() public {

    }
}


// File hardhat/console.sol@v2.7.1

// SPDX-License-Identifier: MIT
pragma solidity >= 0.4.22 <0.9.0;

library console {
	address constant CONSOLE_ADDRESS = address(0x000000000000000000636F6e736F6c652e6c6f67);

	function _sendLogPayload(bytes memory payload) private view {
		uint256 payloadLength = payload.length;
		address consoleAddress = CONSOLE_ADDRESS;
		assembly {
			let payloadStart := add(payload, 32)
			let r := staticcall(gas(), consoleAddress, payloadStart, payloadLength, 0, 0)
		}
	}

	function log() internal view {
		_sendLogPayload(abi.encodeWithSignature("log()"));
	}

	function logInt(int p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(int)", p0));
	}

	function logUint(uint p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
	}

	function logString(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function logBool(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function logAddress(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function logBytes(bytes memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes)", p0));
	}

	function logBytes1(bytes1 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes1)", p0));
	}

	function logBytes2(bytes2 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes2)", p0));
	}

	function logBytes3(bytes3 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes3)", p0));
	}

	function logBytes4(bytes4 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes4)", p0));
	}

	function logBytes5(bytes5 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes5)", p0));
	}

	function logBytes6(bytes6 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes6)", p0));
	}

	function logBytes7(bytes7 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes7)", p0));
	}

	function logBytes8(bytes8 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes8)", p0));
	}

	function logBytes9(bytes9 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes9)", p0));
	}

	function logBytes10(bytes10 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes10)", p0));
	}

	function logBytes11(bytes11 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes11)", p0));
	}

	function logBytes12(bytes12 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes12)", p0));
	}

	function logBytes13(bytes13 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes13)", p0));
	}

	function logBytes14(bytes14 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes14)", p0));
	}

	function logBytes15(bytes15 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes15)", p0));
	}

	function logBytes16(bytes16 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes16)", p0));
	}

	function logBytes17(bytes17 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes17)", p0));
	}

	function logBytes18(bytes18 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes18)", p0));
	}

	function logBytes19(bytes19 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes19)", p0));
	}

	function logBytes20(bytes20 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes20)", p0));
	}

	function logBytes21(bytes21 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes21)", p0));
	}

	function logBytes22(bytes22 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes22)", p0));
	}

	function logBytes23(bytes23 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes23)", p0));
	}

	function logBytes24(bytes24 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes24)", p0));
	}

	function logBytes25(bytes25 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes25)", p0));
	}

	function logBytes26(bytes26 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes26)", p0));
	}

	function logBytes27(bytes27 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes27)", p0));
	}

	function logBytes28(bytes28 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes28)", p0));
	}

	function logBytes29(bytes29 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes29)", p0));
	}

	function logBytes30(bytes30 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes30)", p0));
	}

	function logBytes31(bytes31 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes31)", p0));
	}

	function logBytes32(bytes32 p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bytes32)", p0));
	}

	function log(uint p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint)", p0));
	}

	function log(string memory p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string)", p0));
	}

	function log(bool p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool)", p0));
	}

	function log(address p0) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address)", p0));
	}

	function log(uint p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint)", p0, p1));
	}

	function log(uint p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string)", p0, p1));
	}

	function log(uint p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool)", p0, p1));
	}

	function log(uint p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address)", p0, p1));
	}

	function log(string memory p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint)", p0, p1));
	}

	function log(string memory p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string)", p0, p1));
	}

	function log(string memory p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool)", p0, p1));
	}

	function log(string memory p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address)", p0, p1));
	}

	function log(bool p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint)", p0, p1));
	}

	function log(bool p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string)", p0, p1));
	}

	function log(bool p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool)", p0, p1));
	}

	function log(bool p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address)", p0, p1));
	}

	function log(address p0, uint p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint)", p0, p1));
	}

	function log(address p0, string memory p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string)", p0, p1));
	}

	function log(address p0, bool p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool)", p0, p1));
	}

	function log(address p0, address p1) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address)", p0, p1));
	}

	function log(uint p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint)", p0, p1, p2));
	}

	function log(uint p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string)", p0, p1, p2));
	}

	function log(uint p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool)", p0, p1, p2));
	}

	function log(uint p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool)", p0, p1, p2));
	}

	function log(uint p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address)", p0, p1, p2));
	}

	function log(uint p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint)", p0, p1, p2));
	}

	function log(uint p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string)", p0, p1, p2));
	}

	function log(uint p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool)", p0, p1, p2));
	}

	function log(uint p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address)", p0, p1, p2));
	}

	function log(uint p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint)", p0, p1, p2));
	}

	function log(uint p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string)", p0, p1, p2));
	}

	function log(uint p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool)", p0, p1, p2));
	}

	function log(uint p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool)", p0, p1, p2));
	}

	function log(string memory p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool)", p0, p1, p2));
	}

	function log(string memory p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool)", p0, p1, p2));
	}

	function log(string memory p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address)", p0, p1, p2));
	}

	function log(string memory p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint)", p0, p1, p2));
	}

	function log(string memory p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string)", p0, p1, p2));
	}

	function log(string memory p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool)", p0, p1, p2));
	}

	function log(string memory p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address)", p0, p1, p2));
	}

	function log(bool p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint)", p0, p1, p2));
	}

	function log(bool p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string)", p0, p1, p2));
	}

	function log(bool p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool)", p0, p1, p2));
	}

	function log(bool p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool)", p0, p1, p2));
	}

	function log(bool p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address)", p0, p1, p2));
	}

	function log(bool p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint)", p0, p1, p2));
	}

	function log(bool p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string)", p0, p1, p2));
	}

	function log(bool p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool)", p0, p1, p2));
	}

	function log(bool p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address)", p0, p1, p2));
	}

	function log(bool p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint)", p0, p1, p2));
	}

	function log(bool p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string)", p0, p1, p2));
	}

	function log(bool p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool)", p0, p1, p2));
	}

	function log(bool p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address)", p0, p1, p2));
	}

	function log(address p0, uint p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint)", p0, p1, p2));
	}

	function log(address p0, uint p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string)", p0, p1, p2));
	}

	function log(address p0, uint p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool)", p0, p1, p2));
	}

	function log(address p0, uint p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address)", p0, p1, p2));
	}

	function log(address p0, string memory p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint)", p0, p1, p2));
	}

	function log(address p0, string memory p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string)", p0, p1, p2));
	}

	function log(address p0, string memory p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool)", p0, p1, p2));
	}

	function log(address p0, string memory p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address)", p0, p1, p2));
	}

	function log(address p0, bool p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint)", p0, p1, p2));
	}

	function log(address p0, bool p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string)", p0, p1, p2));
	}

	function log(address p0, bool p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool)", p0, p1, p2));
	}

	function log(address p0, bool p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address)", p0, p1, p2));
	}

	function log(address p0, address p1, uint p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint)", p0, p1, p2));
	}

	function log(address p0, address p1, string memory p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string)", p0, p1, p2));
	}

	function log(address p0, address p1, bool p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool)", p0, p1, p2));
	}

	function log(address p0, address p1, address p2) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address)", p0, p1, p2));
	}

	function log(uint p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,uint,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,string,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,bool,address,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,uint,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,string,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,bool,address)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,uint)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,string)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,bool)", p0, p1, p2, p3));
	}

	function log(uint p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(uint,address,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,uint,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,string,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,bool,address,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,uint,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,string,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,bool,address)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,uint)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,string)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,bool)", p0, p1, p2, p3));
	}

	function log(string memory p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(string,address,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,uint,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,string,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,bool,address,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,uint,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,string,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,bool,address)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,uint)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,string)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,bool)", p0, p1, p2, p3));
	}

	function log(bool p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(bool,address,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, uint p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,uint,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, string memory p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,string,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, bool p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,bool,address,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, uint p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,uint,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, string memory p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,string,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, bool p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,bool,address)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, uint p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,uint)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, string memory p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,string)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, bool p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,bool)", p0, p1, p2, p3));
	}

	function log(address p0, address p1, address p2, address p3) internal view {
		_sendLogPayload(abi.encodeWithSignature("log(address,address,address,address)", p0, p1, p2, p3));
	}

}


// File contracts/handlers/HandlerHelpers.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;


/**
    @title Function used across handler contracts.
    @author ChainSafe Systems.
    @notice This contract is intended to be used with the Bridge contract.
 */
contract HandlerHelpers is IERCHandler, Seriality {
    address public _bridgeAddress;

    // resourceID => token contract address
    mapping(bytes32 => address) public _resourceIDToTokenContractAddress;

    // token contract address => resourceID
    mapping(address => bytes32) public _tokenContractAddressToResourceID;

    // token contract address => is whitelisted
    mapping(address => bool) public _contractWhitelist;

    // token contract address => is burnable
    mapping(address => bool) public _burnList;

    modifier onlyBridge() {
        _onlyBridge();
        _;
    }

    function _onlyBridge() private view {
        require(msg.sender == _bridgeAddress, "sender must be bridge contract");
    }

    /**
        @notice First verifies {_resourceIDToContractAddress}[{resourceID}] and
        {_contractAddressToResourceID}[{contractAddress}] are not already set,
        then sets {_resourceIDToContractAddress} with {contractAddress},
        {_contractAddressToResourceID} with {resourceID},
        and {_contractWhitelist} to true for {contractAddress}.
        @param resourceID ResourceID to be used when making deposits.
        @param contractAddress Address of contract to be called when a deposit is made and a deposited is executed.
     */
    function setResource(bytes32 resourceID, address contractAddress)
        external
        override
        onlyBridge
    {
        _setResource(resourceID, contractAddress);
    }

    /**
        @notice First verifies {contractAddress} is whitelisted, then sets {_burnList}[{contractAddress}]
        to true.
        @param contractAddress Address of contract to be used when making or executing deposits.
     */
    function setBurnable(address contractAddress) external override onlyBridge {
        _setBurnable(contractAddress);
    }

    /**
        @notice Used to manually release funds from ERC safes.
        @param tokenAddress Address of token contract to release.
        @param recipient Address to release tokens to.
        @param amountOrTokenID Either the amount of ERC20 tokens or the ERC721 token ID to release.
     */
    function withdraw(
        address tokenAddress,
        address recipient,
        uint256 amountOrTokenID
    ) external virtual override {}

    function _setResource(bytes32 resourceID, address contractAddress)
        internal
    {
        _resourceIDToTokenContractAddress[resourceID] = contractAddress;
        _tokenContractAddressToResourceID[contractAddress] = resourceID;

        _contractWhitelist[contractAddress] = true;
    }

    function _setBurnable(address contractAddress) internal {
        require(
            _contractWhitelist[contractAddress],
            "provided contract is not whitelisted"
        );
        _burnList[contractAddress] = true;
    }

    uint256 constant MAX_PACK_NUM = 100;
    address[] public _signers;
    uint256 _totalCount;
    function _verifyAbiterSwift(
        address[] memory addressList,bytes[] memory sig) internal view returns (bool){

        uint8 i = 0;
        uint8 verifiedNum = 0;
        uint256 sigLen = sig.length;
        bytes32 msgHash;
        address signer;

        require(_isDuplicated(sig) == false, "duplicate signature exception");

        msgHash = _getAbiterHash(addressList);
        for (i = 0; i < sigLen; i++) {
            
            signer = _recoverSigner(msgHash, sig[i]);

            if (_isInAbterList(signer) == false) {
                continue;
            } else {
                //console.log("_isInAbterList OK");
                verifiedNum++;
            }

            if (verifiedNum >= (_totalCount / 3) * 2 + 1) {
                //console.log("4");
                //console.log("verify is OK ...");
                return true;
            }
        }

        return false;
    }

    function _getAbiterHash(address[] memory addressList) internal pure returns (bytes32){

        uint256 abiterLen = addressList.length;
        bytes memory allSerialData;

        for (uint256 i = 0; i < abiterLen; i++) {

            bytes memory addressBytes = _address2Bytes(addressList[i]);
            allSerialData = _mergeBytes(allSerialData,addressBytes);
        }

        // console.log("address buffer is : ");
        // console.logBytes(allSerialData);
        
        bytes32 msgHash = keccak256(allSerialData);
        // console.logBytes32(msgHash);
        return msgHash;


    }

    function _verifySuperBatch(
        uint8 chainID,
        uint64[] memory depositNonce,
        bytes[] calldata data,
        bytes32[] memory resourceID,
        bytes memory sig,
        address superSigner
    )internal view returns (bool) {

        address signer;
        bytes32 msgHash;

        msgHash = _getMsgHashBatch(chainID, depositNonce, data, resourceID);

        console.log("xxl _verifySuperBatch");
        console.logBytes32(msgHash);

        signer = _recoverSigner(msgHash, sig);

        require(superSigner == signer,"verify super batch signer error");
       
    }

    function _verifyAbterBatch(
        uint8 chainID,
        uint64[] memory depositNonce,
        bytes[] calldata data,
        bytes32[] memory resourceID,
        bytes[] memory sig
    ) internal view returns (bool) {
        uint8 i = 0;
        uint8 verifiedNum = 0;
        address signer;
        bytes32 msgHash;
        uint256 sigLen = sig.length;

        require(_isDuplicated(sig) == false, "duplicate signature exception");

        //console.log("verify %d",( i + 1 ));
        msgHash = _getMsgHashBatch(chainID, depositNonce, data, resourceID);

        console.log("xxl ....");
        console.logBytes32(msgHash);

        for (i = 0; i < sigLen; i++) {

            //msgHash = 0xbe4824f27f749c96ceffb6736cff8fc5a01bf58c6eb2ec041c139b26f0aa5707;
            //console.logBytes32(msgHash);            
            signer = _recoverSigner(msgHash, sig[i]);
            //console.log(signer);

            if (_isInAbterList(signer) == false) {
                continue;
            } else {
                //console.log("_isInAbterList OK");
                verifiedNum++;
            }

            if (verifiedNum >= (_totalCount / 3) * 2 + 1) {
                //console.log("4");
                //console.log("verify is OK ...");
                return true;
            }
        }

        //console.log("verify is failed ...");
        return false;
    }

    /**
        @notice Returns a proposal.
        @param chainID Chain ID deposit originated from.
        @param depositNonce ID of proposal generated by proposal's origin Bridge contract.
        @param data Hash of data to be provided when deposit proposal is executed.
        @param resourceID Hash of data to be provided when deposit proposal is executed.
        @return message hash of the serial bytes:
        -  serialize bytes
        -  32 chainID + [ 32 depositNonce + 32 resourceID  + data(different from token type :weth erc20 erc721....) ] * n
    */
    function _getMsgHashBatch(
        uint8 chainID,
        uint64[] memory depositNonce,
        bytes[] calldata data,
        bytes32[] memory resourceID
    ) internal pure returns (bytes32) {

        bytes32 msgHash = keccak256(
            abi.encode(
                chainID,
                depositNonce,
                data,
                resourceID
            )
        );
        return msgHash;
    }

    function _verifySuper(
        uint8 chainID,
        uint64 depositNonce,
        bytes calldata data,
        bytes32 resourceID,
        bytes memory sig,
        address superSigner
    )internal view returns (bool) {

        address signer;
        bytes32 msgHash;

        msgHash = _getMsgHash(chainID, depositNonce, data, resourceID);

        console.log("super");
        console.logBytes32(msgHash);

        signer = _recoverSigner(msgHash, sig);

        require(superSigner == signer,"verify super signer error");

    }

    function _verifyAbter(
        uint8 chainID,
        uint64 depositNonce,
        bytes calldata data,
        bytes32 resourceID,
        bytes[] memory sig
    ) internal view returns (bool) {
        uint8 i = 0;
        uint8 verifiedNum = 0;
        address signer;
        bytes32 msgHash;
        uint256 sigLen = sig.length;

        require(_isDuplicated(sig) == false, "duplicate signature exception");
        msgHash = _getMsgHash(chainID, depositNonce, data, resourceID);

        console.log("xxl _verifyAbter ... ");
        console.logBytes32(msgHash);
        
        for (i = 0; i < sigLen; i++) {

            signer = _recoverSigner(msgHash, sig[i]);

            if (_isInAbterList(signer) == false) {
                continue;
            } else {
                //console.log("_isInAbterList OK");
                verifiedNum++;
            }
            if (verifiedNum >= (_totalCount / 3) * 2 + 1) {
                //console.log("verify is OK ...");
                return true;
            }
        }

        //console.log("verify is failed ...");
        return false;
    }

    function _isDuplicated(bytes[] memory _sig) internal pure returns (bool) {
        uint256 sigLen = _sig.length;

        //xxl TODO 1
        for (uint8 i = 0; i < sigLen; i++) {
            for (uint8 j = i + 1; j < sigLen; j++) {
                if (keccak256(_sig[i]) == keccak256(_sig[j])) {
                //if( _sig[i].equals((_sig[j])) ) {    
                    return true;
                }
            }
        }

        return false;
    }

    /**
        @notice Returns a proposal.
        @param chainID Chain ID deposit originated from.
        @param depositNonce ID of proposal generated by proposal's origin Bridge contract.
        @param data Hash of data to be provided when deposit proposal is executed.
        @param resourceID Hash of data to be provided when deposit proposal is executed.
        @return message hash of the serial bytes:
        -  serialize bytes
        -  32 chainID + 32 depositNonce + 32 resourceID  + data(different from token type :weth erc20 erc721....)
    */
    function _getMsgHash(
        uint8 chainID,
        uint64 depositNonce,
        bytes calldata data,
        bytes32 resourceID
    ) internal pure returns (bytes32) {

        bytes32 msgHash = keccak256(
            abi.encode(
                chainID,
                depositNonce,
                data,
                resourceID
            )
        );
        return msgHash;

    }

    function _mergeBytes(bytes memory a, bytes memory b)
        internal
        pure
        returns (bytes memory c)
    {
        // Store the length of the first array
        uint256 alen = a.length;
        // Store the length of BOTH arrays
        uint256 totallen = alen + b.length;
        // Count the loops required for array a (sets of 32 bytes)
        uint256 loopsa = (a.length + 31) / 32;
        // Count the loops required for array b (sets of 32 bytes)
        uint256 loopsb = (b.length + 31) / 32;
        assembly {
            let m := mload(0x40)
            // Load the length of both arrays to the head of the new bytes array
            mstore(m, totallen)
            // Add the contents of a to the array
            for {
                let i := 0
            } lt(i, loopsa) {
                i := add(1, i)
            } {
                mstore(
                    add(m, mul(32, add(1, i))),
                    mload(add(a, mul(32, add(1, i))))
                )
            }
            // Add the contents of b to the array
            for {
                let i := 0
            } lt(i, loopsb) {
                i := add(1, i)
            } {
                mstore(
                    add(m, add(mul(32, add(1, i)), alen)),
                    mload(add(b, mul(32, add(1, i))))
                )
            }
            mstore(0x40, add(m, add(32, totallen)))
            c := m
        }
    }

    function _address2Bytes(address a) internal pure returns (bytes memory b){
        assembly {
            let m := mload(0x40)
            a := and(a, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF)
            mstore(add(m, 20), xor(0x140000000000000000000000000000000000000000, a))
            mstore(0x40, add(m, 52))
            b := m
        }
    }
    // function _calculateAddress(bytes memory pub) internal pure returns (address addr) {
    //     bytes32 hash = keccak256(pub);
    //     assembly {
    //         mstore(0, hash)
    //         addr := mload(0)
    //     }
    // }

    function _isInAbterList(address signer) internal view returns (bool) {
        bool ret = false;

        for (uint8 i = 0; i < _signers.length; i++) {
            if (_signers[i] == signer) {
                return true;
            }
        }
        return ret;
    }

    // /**
    // * @dev Recover signer address from a message by using their signature
    // * @param hash bytes32 message, the hash is the signed message. What is recovered is the signer address.
    // * @param sig bytes signature, the signature is generated using web3.eth.sign(). Inclusive "0x..."
    // */
    function _recoverSigner(bytes32 hash, bytes memory sig)
        internal
        pure
        returns (address)
    {
        require(sig.length == 65, "Require correct length");

        bytes32 r;
        bytes32 s;
        uint8 v;

        // Divide the signature in r, s and v variables
        assembly {
            r := mload(add(sig, 32))
            s := mload(add(sig, 64))
            v := byte(0, mload(add(sig, 96)))
        }

        // Version of signature should be 27 or 28, but 0 and 1 are also possible versions
        if (v < 27) {
            v += 27;
        }

        require(v == 27 || v == 28, "Signature version not match");
        return _recoverSigner2(hash, v, r, s);
    }

    function _recoverSigner2(
        bytes32 h,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public pure returns (address) {
        bytes memory prefix = "\x19Ethereum Signed Message:\n32";
        bytes32 prefixedHash = keccak256(abi.encodePacked(prefix, h));
        address addr = ecrecover(prefixedHash, v, r, s);

        //address addr = ecrecover(h, v, r, s);

        return addr;
    }


}


// File @openzeppelin/contracts/math/SafeMath.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}


// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}


// File @openzeppelin/contracts/token/ERC20/ERC20.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;



/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal virtual {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}


// File @openzeppelin/contracts/token/ERC20/ERC20Burnable.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;


/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    using SafeMath for uint256;

    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
}


// File @openzeppelin/contracts/utils/Pausable.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!paused(), "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(paused(), "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}


// File @openzeppelin/contracts/token/ERC20/ERC20Pausable.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;


/**
 * @dev ERC20 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 */
abstract contract ERC20Pausable is ERC20, Pausable {
    /**
     * @dev See {ERC20-_beforeTokenTransfer}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
        super._beforeTokenTransfer(from, to, amount);

        require(!paused(), "ERC20Pausable: token transfer while paused");
    }
}


// File @openzeppelin/contracts/presets/ERC20PresetMinterPauser.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;





/**
 * @dev {ERC20} token, including:
 *
 *  - ability for holders to burn (destroy) their tokens
 *  - a minter role that allows for token minting (creation)
 *  - a pauser role that allows to stop all token transfers
 *
 * This contract uses {AccessControl} to lock permissioned functions using the
 * different roles - head to its documentation for details.
 *
 * The account that deploys the contract will be granted the minter and pauser
 * roles, as well as the default admin role, which will let it grant both minter
 * and pauser roles to other accounts.
 */
contract ERC20PresetMinterPauser is Context, AccessControl, ERC20Burnable, ERC20Pausable {
    bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
    bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");

    /**
     * @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the
     * account that deploys the contract.
     *
     * See {ERC20-constructor}.
     */
    constructor(string memory name, string memory symbol) public ERC20(name, symbol) {
        _setupRole(DEFAULT_ADMIN_ROLE, _msgSender());

        _setupRole(MINTER_ROLE, _msgSender());
        _setupRole(PAUSER_ROLE, _msgSender());
    }

    /**
     * @dev Creates `amount` new tokens for `to`.
     *
     * See {ERC20-_mint}.
     *
     * Requirements:
     *
     * - the caller must have the `MINTER_ROLE`.
     */
    function mint(address to, uint256 amount) public virtual {
        require(hasRole(MINTER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have minter role to mint");
        _mint(to, amount);
    }

    /**
     * @dev Pauses all token transfers.
     *
     * See {ERC20Pausable} and {Pausable-_pause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function pause() public virtual {
        require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to pause");
        _pause();
    }

    /**
     * @dev Unpauses all token transfers.
     *
     * See {ERC20Pausable} and {Pausable-_unpause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function unpause() public virtual {
        require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to unpause");
        _unpause();
    }

    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override(ERC20, ERC20Pausable) {
        super._beforeTokenTransfer(from, to, amount);
    }
}


// File contracts/ERC20Safe.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;




/**
    @title Manages deposited ERC20s.
    @author ChainSafe Systems.
    @notice This contract is intended to be used with ERC20Handler contract.
 */
contract ERC20Safe {
    using SafeMath for uint256;

    /**
        @notice Used to transfer tokens into the safe to fund proposals.
        @param tokenAddress Address of ERC20 to transfer.
        @param owner Address of current token owner.
        @param amount Amount of tokens to transfer.
     */
    function fundERC20(address tokenAddress, address owner, uint256 amount) public {
        IERC20 erc20 = IERC20(tokenAddress);
        _safeTransferFrom(erc20, owner, address(this), amount);
    }

    /**
        @notice Used to gain custody of deposited token.
        @param tokenAddress Address of ERC20 to transfer.
        @param owner Address of current token owner.
        @param recipient Address to transfer tokens to.
        @param amount Amount of tokens to transfer.
     */
    function lockERC20(address tokenAddress, address owner, address recipient, uint256 amount) internal {
        IERC20 erc20 = IERC20(tokenAddress);
        _safeTransferFrom(erc20, owner, recipient, amount);
    }

    /**
        @notice Transfers custody of token to recipient.
        @param tokenAddress Address of ERC20 to transfer.
        @param recipient Address to transfer tokens to.
        @param amount Amount of tokens to transfer.
     */
    function releaseERC20(address tokenAddress, address recipient, uint256 amount) internal {
        IERC20 erc20 = IERC20(tokenAddress);
        _safeTransfer(erc20, recipient, amount);
    }

    /**
        @notice Used to create new ERC20s.
        @param tokenAddress Address of ERC20 to transfer.
        @param recipient Address to mint token to.
        @param amount Amount of token to mint.
     */
    function mintERC20(address tokenAddress, address recipient, uint256 amount) internal {


        console.log("tokenAddress %s : ",tokenAddress);
        ERC20PresetMinterPauser erc20 = ERC20PresetMinterPauser(tokenAddress);

        console.log("recipient %s : ",recipient);
        erc20.mint(recipient, amount);

    }

    /**
        @notice Used to burn ERC20s.
        @param tokenAddress Address of ERC20 to burn.
        @param owner Current owner of tokens.
        @param amount Amount of tokens to burn.
     */
    function burnERC20(address tokenAddress, address owner, uint256 amount) internal {
        ERC20Burnable erc20 = ERC20Burnable(tokenAddress);
        erc20.burnFrom(owner, amount);
    }

    /**
        @notice used to transfer ERC20s safely
        @param token Token instance to transfer
        @param to Address to transfer token to
        @param value Amount of token to transfer
     */
    function _safeTransfer(IERC20 token, address to, uint256 value) private {
        _safeCall(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }


    /**
        @notice used to transfer ERC20s safely
        @param token Token instance to transfer
        @param from Address to transfer token from
        @param to Address to transfer token to
        @param value Amount of token to transfer
     */
    function _safeTransferFrom(IERC20 token, address from, address to, uint256 value) private {
        _safeCall(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
        @notice used to make calls to ERC20s safely
        @param token Token instance call targets
        @param data encoded call data
     */
    function _safeCall(IERC20 token, bytes memory data) private {        
        (bool success, bytes memory returndata) = address(token).call(data);
        require(success, "ERC20: call failed");

        if (returndata.length > 0) {

            require(abi.decode(returndata, (bool)), "ERC20: operation did not succeed");
        }
    }

}


// File contracts/handlers/ERC20Handler.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;



/**
    @title Handles ERC20 deposits and deposit executions.
    @author ChainSafe Systems.
    @notice This contract is intended to be used with the Bridge contract.
 */
contract ERC20Handler is IDepositExecute, HandlerHelpers,ERC20Safe{

    //xxl TODO 2 去掉 DepositRecord
    // struct DepositRecord {
    //     address _tokenAddress;
    //     uint8 _lenDestinationRecipientAddress;
    //     uint8 _destinationChainID;
    //     bytes32 _resourceID;
    //     bytes _destinationRecipientAddress;
    //     address _depositer;
    //     uint256 _amount;
    // }

    // chainID => depositNonce => Deposit Record
    mapping(uint8 => mapping(uint64 => bytes32)) public _depositRecords;


    /**
        @param bridgeAddress Contract address of previously deployed Bridge.
        @param initialResourceIDs Resource IDs are used to identify a specific contract address.
        These are the Resource IDs this contract will initially support.
        @param initialContractAddresses These are the addresses the {initialResourceIDs} will point to, and are the contracts that will be
        called to perform various deposit calls.
        @param burnableContractAddresses These addresses will be set as burnable and when {deposit} is called, the deposited token will be burned.
        When {executeProposal} is called, new tokens will be minted.

        @dev {initialResourceIDs} and {initialContractAddresses} must have the same length (one resourceID for every address).
        Also, these arrays must be ordered in the way that {initialResourceIDs}[0] is the intended resourceID for {initialContractAddresses}[0].
     */
    constructor(
        address bridgeAddress,
        bytes32[] memory initialResourceIDs,
        address[] memory initialContractAddresses,
        address[] memory burnableContractAddresses
    ) public{
        require(
            initialResourceIDs.length == initialContractAddresses.length,
            "initialResourceIDs and initialContractAddresses len mismatch"
        );
        _bridgeAddress = bridgeAddress;

        for (uint256 i = 0; i < initialResourceIDs.length; i++) {
            _setResource(initialResourceIDs[i], initialContractAddresses[i]);
        }

        for (uint256 i = 0; i < burnableContractAddresses.length; i++) {
            _setBurnable(burnableContractAddresses[i]);
        }
    }

    // /**
    //     @param depositNonce This ID will have been generated by the Bridge contract.
    //     @param destId ID of chain deposit will be bridged to.
    //     @return DepositRecord which consists of:
    //     - _tokenAddress Address used when {deposit} was executed.
    //     - _destinationChainID ChainID deposited tokens are intended to end up on.
    //     - _resourceID ResourceID used when {deposit} was executed.
    //     - _lenDestinationRecipientAddress Used to parse recipient's address from {_destinationRecipientAddress}
    //     - _destinationRecipientAddress Address tokens are intended to be deposited to on desitnation chain.
    //     - _depositer Address that initially called {deposit} in the Bridge contract.
    //     - _amount Amount of tokens that were deposited.
    // */
    function getDepositRecord(uint64 depositNonce, uint8 destId)
        external view
        returns (bytes32)
    {
        return _depositRecords[destId][depositNonce];
    }

    /**
        @notice A deposit is initiatied by making a deposit in the Bridge contract.
        @param destinationChainID Chain ID of chain tokens are expected to be bridged to.
        @param depositNonce This value is generated as an ID by the Bridge contract.
        @param depositer Address of account making the deposit in the Bridge contract.
        @param data Consists of: {resourceID}, {amount}, {lenRecipientAddress}, and {recipientAddress}
        all padded to 32 bytes.
        @notice Data passed into the function should be constructed as follows:
        amount                      uint256     bytes   0 - 32
        recipientAddress length     uint256     bytes  32 - 64
        recipientAddress            bytes       bytes  64 - END
        @dev Depending if the corresponding {tokenAddress} for the parsed {resourceID} is
        marked true in {_burnList}, deposited tokens will be burned, if not, they will be locked.
     */
    function deposit(
        bytes32 resourceID,
        uint8 destinationChainID,
        uint64 depositNonce,
        address depositer,
        bytes calldata data
    ) external onlyBridge returns(uint256,address,uint256){

        uint256 amount;      
        uint256 fee; 
        (amount,fee) = abi.decode(data, (uint,uint));
        address tokenAddress = _resourceIDToTokenContractAddress[resourceID];
        require(
            _contractWhitelist[tokenAddress],
            "provided tokenAddress is not whitelisted"
        );

        console.log(amount);
        console.log(depositer);
        

        if (_burnList[tokenAddress]) {
            console.log("xxl come to burnERC20 ");
            burnERC20(tokenAddress, depositer, amount);
        } else {
            console.log("xxl come to lockERC20 ");
            lockERC20(tokenAddress, depositer, address(this), amount);
        }

        _depositRecords[destinationChainID][depositNonce] = keccak256(
            abi.encode(
                tokenAddress,
                destinationChainID,
                resourceID,
                depositer,
                amount,
                fee
            )
        );
        
        return (amount,tokenAddress,fee);
    }

    function burnERC20(
        bytes32 resourceID,
        address depositer,
        uint256 amount) external onlyBridge{

        address tokenAddress = _resourceIDToTokenContractAddress[resourceID];
        burnERC20(tokenAddress, depositer, amount);
    }

    function mintERC20(
        bytes32 resourceID,
        address depositer,
        uint256 amount) external onlyBridge{

        address tokenAddress = _resourceIDToTokenContractAddress[resourceID];
        mintERC20(tokenAddress, depositer, amount);
    }

    /**
        @notice Proposal execution should be initiated when a proposal is finalized in the Bridge contract.
        by a relayer on the deposit's destination chain.
        @param data Consists of {resourceID}, {amount}, {lenDestinationRecipientAddress},
        and {destinationRecipientAddress} all padded to 32 bytes.
        @notice Data passed into the function should be constructed as follows:
        amount                                 uint256     bytes  0 - 32
        destinationRecipientAddress length     uint256     bytes  32 - 64
        destinationRecipientAddress            bytes       bytes  64 - END
     */
   function executeProposal(
       bytes32 resourceID, 
       bytes calldata data
    ) external override onlyBridge returns(uint256){

        uint256       amount;
        uint256       fee;
        uint256       lenDestinationRecipientAddress;
        bytes  memory destinationRecipientAddress;

        (amount, fee,lenDestinationRecipientAddress) = abi.decode(data, (uint, uint, uint));
        destinationRecipientAddress = bytes(data[96:96 + lenDestinationRecipientAddress]);

        bytes20 recipientAddress;
        address tokenAddress = _resourceIDToTokenContractAddress[resourceID];

        assembly {
            recipientAddress := mload(add(destinationRecipientAddress, 0x20))
        }

        require(_contractWhitelist[tokenAddress], "provided tokenAddress is not whitelisted");
        
        if (_burnList[tokenAddress]) {
            mintERC20(tokenAddress, address(recipientAddress), amount);
        } else {
            releaseERC20(tokenAddress, address(recipientAddress), amount);
        }

        return fee;
    }

    /**
        @notice Used to manually release ERC20 tokens from ERC20Safe.
        @param tokenAddress Address of token contract to release.
        @param recipient Address to release tokens to.
        @param amount The amount of ERC20 tokens to release.
     */
    function withdraw(
        address tokenAddress,
        address recipient,
        uint256 amount
    ) external override onlyBridge {
        releaseERC20(tokenAddress, recipient, amount);
    }

    function getType() external override pure returns(HandleTypes) {
        //return ERC20;
        return IDepositExecute.HandleTypes.ERC20;
    }

    function rewardWeth(bytes32 resourceID,address receiver,uint256 fee)external onlyBridge {

        address tokenAddress = _resourceIDToTokenContractAddress[resourceID];
        mintERC20(tokenAddress, receiver, fee);

    } 

}


// File @openzeppelin/contracts/introspection/IERC165.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}


// File @openzeppelin/contracts/token/ERC721/IERC721.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 tokenId) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
      * @dev Safely transfers `tokenId` token from `from` to `to`.
      *
      * Requirements:
      *
      * - `from` cannot be the zero address.
      * - `to` cannot be the zero address.
      * - `tokenId` token must exist and be owned by `from`.
      * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
      * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
      *
      * Emits a {Transfer} event.
      */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes calldata data) external;
}


// File @openzeppelin/contracts/GSN/Context.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;


// File @openzeppelin/contracts/utils/Counters.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 * Since it is not possible to overflow a 256 bit integer with increments of one, `increment` can skip the {SafeMath}
 * overflow check, thereby saving gas. This does assume however correct usage, in that the underlying `_value` is never
 * directly accessed.
 */
library Counters {
    using SafeMath for uint256;

    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        // The {SafeMath} overflow check can be skipped here, see the comment at the top
        counter._value += 1;
    }

    function decrement(Counter storage counter) internal {
        counter._value = counter._value.sub(1);
    }
}


// File @openzeppelin/contracts/token/ERC721/IERC721Metadata.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Metadata is IERC721 {

    /**
     * @dev Returns the token collection name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the token collection symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the Uniform Resource Identifier (URI) for `tokenId` token.
     */
    function tokenURI(uint256 tokenId) external view returns (string memory);
}


// File @openzeppelin/contracts/token/ERC721/IERC721Enumerable.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
interface IERC721Enumerable is IERC721 {

    /**
     * @dev Returns the total amount of tokens stored by the contract.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256 tokenId);

    /**
     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
     * Use along with {totalSupply} to enumerate all tokens.
     */
    function tokenByIndex(uint256 index) external view returns (uint256);
}


// File @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721.onERC721Received.selector`.
     */
    function onERC721Received(address operator, address from, uint256 tokenId, bytes calldata data) external returns (bytes4);
}


// File @openzeppelin/contracts/introspection/ERC165.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts may inherit from this and call {_registerInterface} to declare
 * their support of an interface.
 */
abstract contract ERC165 is IERC165 {
    /*
     * bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
     */
    bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;

    /**
     * @dev Mapping of interface ids to whether or not it's supported.
     */
    mapping(bytes4 => bool) private _supportedInterfaces;

    constructor () internal {
        // Derived contracts need only register support for their own interfaces,
        // we register support for ERC165 itself here
        _registerInterface(_INTERFACE_ID_ERC165);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     *
     * Time complexity O(1), guaranteed to always use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return _supportedInterfaces[interfaceId];
    }

    /**
     * @dev Registers the contract as an implementer of the interface defined by
     * `interfaceId`. Support of the actual ERC165 interface is automatic and
     * registering its interface id is not required.
     *
     * See {IERC165-supportsInterface}.
     *
     * Requirements:
     *
     * - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
     */
    function _registerInterface(bytes4 interfaceId) internal virtual {
        require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
        _supportedInterfaces[interfaceId] = true;
    }
}


// File @openzeppelin/contracts/utils/EnumerableMap.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Library for managing an enumerable variant of Solidity's
 * https://solidity.readthedocs.io/en/latest/types.html#mapping-types[`mapping`]
 * type.
 *
 * Maps have the following properties:
 *
 * - Entries are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Entries are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableMap for EnumerableMap.UintToAddressMap;
 *
 *     // Declare a set state variable
 *     EnumerableMap.UintToAddressMap private myMap;
 * }
 * ```
 *
 * As of v3.0.0, only maps of type `uint256 -> address` (`UintToAddressMap`) are
 * supported.
 */
library EnumerableMap {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Map type with
    // bytes32 keys and values.
    // The Map implementation uses private functions, and user-facing
    // implementations (such as Uint256ToAddressMap) are just wrappers around
    // the underlying Map.
    // This means that we can only create new EnumerableMaps for types that fit
    // in bytes32.

    struct MapEntry {
        bytes32 _key;
        bytes32 _value;
    }

    struct Map {
        // Storage of map keys and values
        MapEntry[] _entries;

        // Position of the entry defined by a key in the `entries` array, plus 1
        // because index 0 means a key is not in the map.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function _set(Map storage map, bytes32 key, bytes32 value) private returns (bool) {
        // We read and store the key's index to prevent multiple reads from the same storage slot
        uint256 keyIndex = map._indexes[key];

        if (keyIndex == 0) { // Equivalent to !contains(map, key)
            map._entries.push(MapEntry({ _key: key, _value: value }));
            // The entry is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            map._indexes[key] = map._entries.length;
            return true;
        } else {
            map._entries[keyIndex - 1]._value = value;
            return false;
        }
    }

    /**
     * @dev Removes a key-value pair from a map. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function _remove(Map storage map, bytes32 key) private returns (bool) {
        // We read and store the key's index to prevent multiple reads from the same storage slot
        uint256 keyIndex = map._indexes[key];

        if (keyIndex != 0) { // Equivalent to contains(map, key)
            // To delete a key-value pair from the _entries array in O(1), we swap the entry to delete with the last one
            // in the array, and then remove the last entry (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = keyIndex - 1;
            uint256 lastIndex = map._entries.length - 1;

            // When the entry to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            MapEntry storage lastEntry = map._entries[lastIndex];

            // Move the last entry to the index where the entry to delete is
            map._entries[toDeleteIndex] = lastEntry;
            // Update the index for the moved entry
            map._indexes[lastEntry._key] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved entry was stored
            map._entries.pop();

            // Delete the index for the deleted slot
            delete map._indexes[key];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function _contains(Map storage map, bytes32 key) private view returns (bool) {
        return map._indexes[key] != 0;
    }

    /**
     * @dev Returns the number of key-value pairs in the map. O(1).
     */
    function _length(Map storage map) private view returns (uint256) {
        return map._entries.length;
    }

   /**
    * @dev Returns the key-value pair stored at position `index` in the map. O(1).
    *
    * Note that there are no guarantees on the ordering of entries inside the
    * array, and it may change when more entries are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Map storage map, uint256 index) private view returns (bytes32, bytes32) {
        require(map._entries.length > index, "EnumerableMap: index out of bounds");

        MapEntry storage entry = map._entries[index];
        return (entry._key, entry._value);
    }

    /**
     * @dev Tries to returns the value associated with `key`.  O(1).
     * Does not revert if `key` is not in the map.
     */
    function _tryGet(Map storage map, bytes32 key) private view returns (bool, bytes32) {
        uint256 keyIndex = map._indexes[key];
        if (keyIndex == 0) return (false, 0); // Equivalent to contains(map, key)
        return (true, map._entries[keyIndex - 1]._value); // All indexes are 1-based
    }

    /**
     * @dev Returns the value associated with `key`.  O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function _get(Map storage map, bytes32 key) private view returns (bytes32) {
        uint256 keyIndex = map._indexes[key];
        require(keyIndex != 0, "EnumerableMap: nonexistent key"); // Equivalent to contains(map, key)
        return map._entries[keyIndex - 1]._value; // All indexes are 1-based
    }

    /**
     * @dev Same as {_get}, with a custom error message when `key` is not in the map.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {_tryGet}.
     */
    function _get(Map storage map, bytes32 key, string memory errorMessage) private view returns (bytes32) {
        uint256 keyIndex = map._indexes[key];
        require(keyIndex != 0, errorMessage); // Equivalent to contains(map, key)
        return map._entries[keyIndex - 1]._value; // All indexes are 1-based
    }

    // UintToAddressMap

    struct UintToAddressMap {
        Map _inner;
    }

    /**
     * @dev Adds a key-value pair to a map, or updates the value for an existing
     * key. O(1).
     *
     * Returns true if the key was added to the map, that is if it was not
     * already present.
     */
    function set(UintToAddressMap storage map, uint256 key, address value) internal returns (bool) {
        return _set(map._inner, bytes32(key), bytes32(uint256(uint160(value))));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the key was removed from the map, that is if it was present.
     */
    function remove(UintToAddressMap storage map, uint256 key) internal returns (bool) {
        return _remove(map._inner, bytes32(key));
    }

    /**
     * @dev Returns true if the key is in the map. O(1).
     */
    function contains(UintToAddressMap storage map, uint256 key) internal view returns (bool) {
        return _contains(map._inner, bytes32(key));
    }

    /**
     * @dev Returns the number of elements in the map. O(1).
     */
    function length(UintToAddressMap storage map) internal view returns (uint256) {
        return _length(map._inner);
    }

   /**
    * @dev Returns the element stored at position `index` in the set. O(1).
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintToAddressMap storage map, uint256 index) internal view returns (uint256, address) {
        (bytes32 key, bytes32 value) = _at(map._inner, index);
        return (uint256(key), address(uint160(uint256(value))));
    }

    /**
     * @dev Tries to returns the value associated with `key`.  O(1).
     * Does not revert if `key` is not in the map.
     *
     * _Available since v3.4._
     */
    function tryGet(UintToAddressMap storage map, uint256 key) internal view returns (bool, address) {
        (bool success, bytes32 value) = _tryGet(map._inner, bytes32(key));
        return (success, address(uint160(uint256(value))));
    }

    /**
     * @dev Returns the value associated with `key`.  O(1).
     *
     * Requirements:
     *
     * - `key` must be in the map.
     */
    function get(UintToAddressMap storage map, uint256 key) internal view returns (address) {
        return address(uint160(uint256(_get(map._inner, bytes32(key)))));
    }

    /**
     * @dev Same as {get}, with a custom error message when `key` is not in the map.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryGet}.
     */
    function get(UintToAddressMap storage map, uint256 key, string memory errorMessage) internal view returns (address) {
        return address(uint160(uint256(_get(map._inner, bytes32(key), errorMessage))));
    }
}


// File @openzeppelin/contracts/utils/Strings.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev String operations.
 */
library Strings {
    /**
     * @dev Converts a `uint256` to its ASCII `string` representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        // Inspired by OraclizeAPI's implementation - MIT licence
        // https://github.com/oraclize/ethereum-api/blob/b42146b063c7d6ee1358846c198246239e9360e8/oraclizeAPI_0.4.25.sol

        if (value == 0) {
            return "0";
        }
        uint256 temp = value;
        uint256 digits;
        while (temp != 0) {
            digits++;
            temp /= 10;
        }
        bytes memory buffer = new bytes(digits);
        uint256 index = digits - 1;
        temp = value;
        while (temp != 0) {
            buffer[index--] = bytes1(uint8(48 + temp % 10));
            temp /= 10;
        }
        return string(buffer);
    }
}


// File @openzeppelin/contracts/token/ERC721/ERC721.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;











/**
 * @title ERC721 Non-Fungible Token Standard basic implementation
 * @dev see https://eips.ethereum.org/EIPS/eip-721
 */
contract ERC721 is Context, ERC165, IERC721, IERC721Metadata, IERC721Enumerable {
    using SafeMath for uint256;
    using Address for address;
    using EnumerableSet for EnumerableSet.UintSet;
    using EnumerableMap for EnumerableMap.UintToAddressMap;
    using Strings for uint256;

    // Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
    // which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
    bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;

    // Mapping from holder address to their (enumerable) set of owned tokens
    mapping (address => EnumerableSet.UintSet) private _holderTokens;

    // Enumerable mapping from token ids to their owners
    EnumerableMap.UintToAddressMap private _tokenOwners;

    // Mapping from token ID to approved address
    mapping (uint256 => address) private _tokenApprovals;

    // Mapping from owner to operator approvals
    mapping (address => mapping (address => bool)) private _operatorApprovals;

    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    // Optional mapping for token URIs
    mapping (uint256 => string) private _tokenURIs;

    // Base URI
    string private _baseURI;

    /*
     *     bytes4(keccak256('balanceOf(address)')) == 0x70a08231
     *     bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
     *     bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
     *     bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
     *     bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
     *     bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c5
     *     bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
     *
     *     => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
     *        0xa22cb465 ^ 0xe985e9c5 ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
     */
    bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;

    /*
     *     bytes4(keccak256('name()')) == 0x06fdde03
     *     bytes4(keccak256('symbol()')) == 0x95d89b41
     *     bytes4(keccak256('tokenURI(uint256)')) == 0xc87b56dd
     *
     *     => 0x06fdde03 ^ 0x95d89b41 ^ 0xc87b56dd == 0x5b5e139f
     */
    bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x5b5e139f;

    /*
     *     bytes4(keccak256('totalSupply()')) == 0x18160ddd
     *     bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
     *     bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
     *
     *     => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
     */
    bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;

    /**
     * @dev Initializes the contract by setting a `name` and a `symbol` to the token collection.
     */
    constructor (string memory name_, string memory symbol_) public {
        _name = name_;
        _symbol = symbol_;

        // register the supported interfaces to conform to ERC721 via ERC165
        _registerInterface(_INTERFACE_ID_ERC721);
        _registerInterface(_INTERFACE_ID_ERC721_METADATA);
        _registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
    }

    /**
     * @dev See {IERC721-balanceOf}.
     */
    function balanceOf(address owner) public view virtual override returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");
        return _holderTokens[owner].length();
    }

    /**
     * @dev See {IERC721-ownerOf}.
     */
    function ownerOf(uint256 tokenId) public view virtual override returns (address) {
        return _tokenOwners.get(tokenId, "ERC721: owner query for nonexistent token");
    }

    /**
     * @dev See {IERC721Metadata-name}.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev See {IERC721Metadata-symbol}.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev See {IERC721Metadata-tokenURI}.
     */
    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: URI query for nonexistent token");

        string memory _tokenURI = _tokenURIs[tokenId];
        string memory base = baseURI();

        // If there is no base URI, return the token URI.
        if (bytes(base).length == 0) {
            return _tokenURI;
        }
        // If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
        if (bytes(_tokenURI).length > 0) {
            return string(abi.encodePacked(base, _tokenURI));
        }
        // If there is a baseURI but no tokenURI, concatenate the tokenID to the baseURI.
        return string(abi.encodePacked(base, tokenId.toString()));
    }

    /**
    * @dev Returns the base URI set via {_setBaseURI}. This will be
    * automatically added as a prefix in {tokenURI} to each token's URI, or
    * to the token ID if no specific URI is set for that token ID.
    */
    function baseURI() public view virtual returns (string memory) {
        return _baseURI;
    }

    /**
     * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
        return _holderTokens[owner].at(index);
    }

    /**
     * @dev See {IERC721Enumerable-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        // _tokenOwners are indexed by tokenIds, so .length() returns the number of tokenIds
        return _tokenOwners.length();
    }

    /**
     * @dev See {IERC721Enumerable-tokenByIndex}.
     */
    function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
        (uint256 tokenId, ) = _tokenOwners.at(index);
        return tokenId;
    }

    /**
     * @dev See {IERC721-approve}.
     */
    function approve(address to, uint256 tokenId) public virtual override {
        address owner = ERC721.ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(_msgSender() == owner || ERC721.isApprovedForAll(owner, _msgSender()),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _approve(to, tokenId);
    }

    /**
     * @dev See {IERC721-getApproved}.
     */
    function getApproved(uint256 tokenId) public view virtual override returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev See {IERC721-setApprovalForAll}.
     */
    function setApprovalForAll(address operator, bool approved) public virtual override {
        require(operator != _msgSender(), "ERC721: approve to caller");

        _operatorApprovals[_msgSender()][operator] = approved;
        emit ApprovalForAll(_msgSender(), operator, approved);
    }

    /**
     * @dev See {IERC721-isApprovedForAll}.
     */
    function isApprovedForAll(address owner, address operator) public view virtual override returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev See {IERC721-transferFrom}.
     */
    function transferFrom(address from, address to, uint256 tokenId) public virtual override {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");

        _transfer(from, to, tokenId);
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public virtual override {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev See {IERC721-safeTransferFrom}.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public virtual override {
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: transfer caller is not owner nor approved");
        _safeTransfer(from, to, tokenId, _data);
    }

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * `_data` is additional data, it has no specified format and it is sent in call to `to`.
     *
     * This internal function is equivalent to {safeTransferFrom}, and can be used to e.g.
     * implement alternative mechanisms to perform token transfer, such as signature-based.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeTransfer(address from, address to, uint256 tokenId, bytes memory _data) internal virtual {
        _transfer(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether `tokenId` exists.
     *
     * Tokens can be managed by their owner or approved accounts via {approve} or {setApprovalForAll}.
     *
     * Tokens start existing when they are minted (`_mint`),
     * and stop existing when they are burned (`_burn`).
     */
    function _exists(uint256 tokenId) internal view virtual returns (bool) {
        return _tokenOwners.contains(tokenId);
    }

    /**
     * @dev Returns whether `spender` is allowed to manage `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view virtual returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ERC721.ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || ERC721.isApprovedForAll(owner, spender));
    }

    /**
     * @dev Safely mints `tokenId` and transfers it to `to`.
     *
     * Requirements:
     d*
     * - `tokenId` must not exist.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function _safeMint(address to, uint256 tokenId) internal virtual {
        _safeMint(to, tokenId, "");
    }

    /**
     * @dev Same as {xref-ERC721-_safeMint-address-uint256-}[`_safeMint`], with an additional `data` parameter which is
     * forwarded in {IERC721Receiver-onERC721Received} to contract recipients.
     */
    function _safeMint(address to, uint256 tokenId, bytes memory _data) internal virtual {
        _mint(to, tokenId);
        require(_checkOnERC721Received(address(0), to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Mints `tokenId` and transfers it to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {_safeMint} whenever possible
     *
     * Requirements:
     *
     * - `tokenId` must not exist.
     * - `to` cannot be the zero address.
     *
     * Emits a {Transfer} event.
     */
    function _mint(address to, uint256 tokenId) internal virtual {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _beforeTokenTransfer(address(0), to, tokenId);

        _holderTokens[to].add(tokenId);

        _tokenOwners.set(tokenId, to);

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Destroys `tokenId`.
     * The approval is cleared when the token is burned.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     *
     * Emits a {Transfer} event.
     */
    function _burn(uint256 tokenId) internal virtual {
        address owner = ERC721.ownerOf(tokenId); // internal owner

        _beforeTokenTransfer(owner, address(0), tokenId);

        // Clear approvals
        _approve(address(0), tokenId);

        // Clear metadata (if any)
        if (bytes(_tokenURIs[tokenId]).length != 0) {
            delete _tokenURIs[tokenId];
        }

        _holderTokens[owner].remove(tokenId);

        _tokenOwners.remove(tokenId);

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Transfers `tokenId` from `from` to `to`.
     *  As opposed to {transferFrom}, this imposes no restrictions on msg.sender.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     *
     * Emits a {Transfer} event.
     */
    function _transfer(address from, address to, uint256 tokenId) internal virtual {
        require(ERC721.ownerOf(tokenId) == from, "ERC721: transfer of token that is not own"); // internal owner
        require(to != address(0), "ERC721: transfer to the zero address");

        _beforeTokenTransfer(from, to, tokenId);

        // Clear approvals from the previous owner
        _approve(address(0), tokenId);

        _holderTokens[from].remove(tokenId);
        _holderTokens[to].add(tokenId);

        _tokenOwners.set(tokenId, to);

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
        require(_exists(tokenId), "ERC721Metadata: URI set of nonexistent token");
        _tokenURIs[tokenId] = _tokenURI;
    }

    /**
     * @dev Internal function to set the base URI for all token IDs. It is
     * automatically added as a prefix to the value returned in {tokenURI},
     * or to the token ID if {tokenURI} is empty.
     */
    function _setBaseURI(string memory baseURI_) internal virtual {
        _baseURI = baseURI_;
    }

    /**
     * @dev Internal function to invoke {IERC721Receiver-onERC721Received} on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
        private returns (bool)
    {
        if (!to.isContract()) {
            return true;
        }
        bytes memory returndata = to.functionCall(abi.encodeWithSelector(
            IERC721Receiver(to).onERC721Received.selector,
            _msgSender(),
            from,
            tokenId,
            _data
        ), "ERC721: transfer to non ERC721Receiver implementer");
        bytes4 retval = abi.decode(returndata, (bytes4));
        return (retval == _ERC721_RECEIVED);
    }

    /**
     * @dev Approve `to` to operate on `tokenId`
     *
     * Emits an {Approval} event.
     */
    function _approve(address to, uint256 tokenId) internal virtual {
        _tokenApprovals[tokenId] = to;
        emit Approval(ERC721.ownerOf(tokenId), to, tokenId); // internal owner
    }

    /**
     * @dev Hook that is called before any token transfer. This includes minting
     * and burning.
     *
     * Calling conditions:
     *
     * - When `from` and `to` are both non-zero, ``from``'s `tokenId` will be
     * transferred to `to`.
     * - When `from` is zero, `tokenId` will be minted for `to`.
     * - When `to` is zero, ``from``'s `tokenId` will be burned.
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual { }
}


// File @openzeppelin/contracts/token/ERC721/ERC721Burnable.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;


/**
 * @title ERC721 Burnable Token
 * @dev ERC721 Token that can be irreversibly burned (destroyed).
 */
abstract contract ERC721Burnable is Context, ERC721 {
    /**
     * @dev Burns `tokenId`. See {ERC721-_burn}.
     *
     * Requirements:
     *
     * - The caller must own `tokenId` or be an approved operator.
     */
    function burn(uint256 tokenId) public virtual {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Burnable: caller is not owner nor approved");
        _burn(tokenId);
    }
}


// File @openzeppelin/contracts/token/ERC721/ERC721Pausable.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;


/**
 * @dev ERC721 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 */
abstract contract ERC721Pausable is ERC721, Pausable {
    /**
     * @dev See {ERC721-_beforeTokenTransfer}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal virtual override {
        super._beforeTokenTransfer(from, to, tokenId);

        require(!paused(), "ERC721Pausable: token transfer while paused");
    }
}


// File contracts/ERC721MinterBurnerPauser.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

// This is adapted from https://github.com/OpenZeppelin/openzeppelin-contracts/blob/v3.0.0/contracts/presets/ERC721PresetMinterPauserAutoId.sol






contract ERC721MinterBurnerPauser is Context, AccessControl, ERC721Burnable, ERC721Pausable {
    bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
    bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");

    /**
     * @dev Grants `DEFAULT_ADMIN_ROLE` and `MINTER_ROLE`to the account that
     * deploys the contract.
     *
     * Token URIs will be autogenerated based on `baseURI` and their token IDs.
     * See {ERC721-tokenURI}.
     */
    constructor(string memory name, string memory symbol, string memory baseURI) ERC721(name, symbol) public {
        _setupRole(DEFAULT_ADMIN_ROLE, _msgSender());

        _setupRole(MINTER_ROLE, _msgSender());
        _setupRole(PAUSER_ROLE, _msgSender());

        _setBaseURI(baseURI);
    }

    /**
     * @dev Creates a new token for `to`. Its token ID will be automatically
     * assigned (and available on the emitted {Transfer} event), and the token
     * URI autogenerated based on the base URI passed at construction.
     *
     * See {ERC721-_mint}.
     *
     * Requirements:
     *
     * - the caller must have the `MINTER_ROLE`.
     */
    function mint(address to, uint256 tokenId, string memory _data) public {
        require(hasRole(MINTER_ROLE, _msgSender()), "ERC721MinterBurnerPauser: must have minter role to mint");

        _mint(to, tokenId);
        _setTokenURI(tokenId, _data);
    }

    /**
     * @dev Pauses all token transfers.
     *
     * See {ERC721Pausable} and {Pausable-_pause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function pause() public {
        require(hasRole(PAUSER_ROLE, _msgSender()), "ERC721MinterBurnerPauser: must have pauser role to pause");
        _pause();
    }

    /**
     * @dev Unpauses all token transfers.
     *
     * See {ERC721Pausable} and {Pausable-_unpause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function unpause() public {
        require(hasRole(PAUSER_ROLE, _msgSender()), "ERC721MinterBurnerPauser: must have pauser role to unpause");
        _unpause();
    }

    function _beforeTokenTransfer(address from, address to, uint256 tokenId) internal override(ERC721, ERC721Pausable) {
        super._beforeTokenTransfer(from, to, tokenId);
    }
}


// File contracts/ERC721Safe.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;



/**
    @title Manages deposited ERC721s.
    @author ChainSafe Systems.
    @notice This contract is intended to be used with ERC721Handler contract.
 */
contract ERC721Safe {
    using SafeMath for uint256;

    /**
        @notice Used to transfer tokens into the safe to fund proposals.
        @param tokenAddress Address of ERC721 to transfer.
        @param owner Address of current token owner.
        @param tokenID ID of token to transfer.
     */
    function fundERC721(address tokenAddress, address owner, uint tokenID) public {
        IERC721 erc721 = IERC721(tokenAddress);
        erc721.transferFrom(owner, address(this), tokenID);
    }

    /**
        @notice Used to gain custoday of deposited token.
        @param tokenAddress Address of ERC721 to transfer.
        @param owner Address of current token owner.
        @param recipient Address to transfer token to.
        @param tokenID ID of token to transfer.
     */
    function lockERC721(address tokenAddress, address owner, address recipient, uint tokenID) internal {
        IERC721 erc721 = IERC721(tokenAddress);
        erc721.transferFrom(owner, recipient, tokenID);

    }

    /**
        @notice Transfers custody of token to recipient.
        @param tokenAddress Address of ERC721 to transfer.
        @param owner Address of current token owner.
        @param recipient Address to transfer token to.
        @param tokenID ID of token to transfer.
     */
    function releaseERC721(address tokenAddress, address owner, address recipient, uint256 tokenID) internal {
        IERC721 erc721 = IERC721(tokenAddress);
        erc721.transferFrom(owner, recipient, tokenID);
    }

    /**
        @notice Used to create new ERC721s.
        @param tokenAddress Address of ERC721 to mint.
        @param recipient Address to mint token to.
        @param tokenID ID of token to mint.
        @param data Optional data to send along with mint call.
     */
    function mintERC721(address tokenAddress, address recipient, uint256 tokenID, bytes memory data) internal {
        ERC721MinterBurnerPauser erc721 = ERC721MinterBurnerPauser(tokenAddress);
        erc721.mint(recipient, tokenID, string(data));
    }

    /**
        @notice Used to burn ERC721s.
        @param tokenAddress Address of ERC721 to burn.
        @param tokenID ID of token to burn.
     */
    function burnERC721(address tokenAddress, uint256 tokenID) internal {
        ERC721MinterBurnerPauser erc721 = ERC721MinterBurnerPauser(tokenAddress);
        erc721.burn(tokenID);
    }

}


// File @openzeppelin/contracts/introspection/ERC165Checker.sol@v3.4.2

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Library used to query support of an interface declared via {IERC165}.
 *
 * Note that these functions return the actual result of the query: they do not
 * `revert` if an interface is not supported. It is up to the caller to decide
 * what to do in these cases.
 */
library ERC165Checker {
    // As per the EIP-165 spec, no interface should ever match 0xffffffff
    bytes4 private constant _INTERFACE_ID_INVALID = 0xffffffff;

    /*
     * bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
     */
    bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;

    /**
     * @dev Returns true if `account` supports the {IERC165} interface,
     */
    function supportsERC165(address account) internal view returns (bool) {
        // Any contract that implements ERC165 must explicitly indicate support of
        // InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
        return _supportsERC165Interface(account, _INTERFACE_ID_ERC165) &&
            !_supportsERC165Interface(account, _INTERFACE_ID_INVALID);
    }

    /**
     * @dev Returns true if `account` supports the interface defined by
     * `interfaceId`. Support for {IERC165} itself is queried automatically.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
        // query support of both ERC165 as per the spec and support of _interfaceId
        return supportsERC165(account) &&
            _supportsERC165Interface(account, interfaceId);
    }

    /**
     * @dev Returns a boolean array where each value corresponds to the
     * interfaces passed in and whether they're supported or not. This allows
     * you to batch check interfaces for a contract where your expectation
     * is that some interfaces may not be supported.
     *
     * See {IERC165-supportsInterface}.
     *
     * _Available since v3.4._
     */
    function getSupportedInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool[] memory) {
        // an array of booleans corresponding to interfaceIds and whether they're supported or not
        bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);

        // query support of ERC165 itself
        if (supportsERC165(account)) {
            // query support of each interface in interfaceIds
            for (uint256 i = 0; i < interfaceIds.length; i++) {
                interfaceIdsSupported[i] = _supportsERC165Interface(account, interfaceIds[i]);
            }
        }

        return interfaceIdsSupported;
    }

    /**
     * @dev Returns true if `account` supports all the interfaces defined in
     * `interfaceIds`. Support for {IERC165} itself is queried automatically.
     *
     * Batch-querying can lead to gas savings by skipping repeated checks for
     * {IERC165} support.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
        // query support of ERC165 itself
        if (!supportsERC165(account)) {
            return false;
        }

        // query support of each interface in _interfaceIds
        for (uint256 i = 0; i < interfaceIds.length; i++) {
            if (!_supportsERC165Interface(account, interfaceIds[i])) {
                return false;
            }
        }

        // all interfaces supported
        return true;
    }

    /**
     * @notice Query if a contract implements an interface, does not check ERC165 support
     * @param account The address of the contract to query for support of an interface
     * @param interfaceId The interface identifier, as specified in ERC-165
     * @return true if the contract at account indicates support of the interface with
     * identifier interfaceId, false otherwise
     * @dev Assumes that account contains a contract that supports ERC165, otherwise
     * the behavior of this method is undefined. This precondition can be checked
     * with {supportsERC165}.
     * Interface identification is specified in ERC-165.
     */
    function _supportsERC165Interface(address account, bytes4 interfaceId) private view returns (bool) {
        // success determines whether the staticcall succeeded and result determines
        // whether the contract at account indicates support of _interfaceId
        (bool success, bool result) = _callERC165SupportsInterface(account, interfaceId);

        return (success && result);
    }

    /**
     * @notice Calls the function with selector 0x01ffc9a7 (ERC165) and suppresses throw
     * @param account The address of the contract to query for support of an interface
     * @param interfaceId The interface identifier, as specified in ERC-165
     * @return success true if the STATICCALL succeeded, false otherwise
     * @return result true if the STATICCALL succeeded and the contract at account
     * indicates support of the interface with identifier interfaceId, false otherwise
     */
    function _callERC165SupportsInterface(address account, bytes4 interfaceId)
        private
        view
        returns (bool, bool)
    {
        bytes memory encodedParams = abi.encodeWithSelector(_INTERFACE_ID_ERC165, interfaceId);
        (bool success, bytes memory result) = account.staticcall{ gas: 30000 }(encodedParams);
        if (result.length < 32) return (false, false);
        return (success, abi.decode(result, (bool)));
    }
}


// File contracts/handlers/ERC721Handler.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;






/**
    @title Handles ERC721 deposits and deposit executions.
    @author ChainSafe Systems.
    @notice This contract is intended to be used with the Bridge contract.
 */
contract ERC721Handler is IDepositExecute, HandlerHelpers, ERC721Safe {
    using ERC165Checker for address;

    bytes4 private constant _INTERFACE_ERC721_METADATA = 0x5b5e139f;

    struct DepositRecord {
        address _tokenAddress;
        uint8   _destinationChainID;
        bytes32 _resourceID;
        bytes   _destinationRecipientAddress;
        address _depositer;
        uint    _tokenID;
        bytes   _metaData;
    }


    // DepositNonce => Deposit Record
    // mapping (uint8 => mapping (uint64 => DepositRecord)) public _depositRecords;
    mapping(uint8 => mapping(uint64 => bytes32)) public _depositRecords;


    /**
        @param bridgeAddress Contract address of previously deployed Bridge.
        @param initialResourceIDs Resource IDs are used to identify a specific contract address.
        These are the Resource IDs this contract will initially support.
        @param initialContractAddresses These are the addresses the {initialResourceIDs} will point to, and are the contracts that will be
        called to perform various deposit calls.
        @param burnableContractAddresses These addresses will be set as burnable and when {deposit} is called, the deposited token will be burned.
        When {executeProposal} is called, new tokens will be minted.

        @dev {initialResourceIDs} and {initialContractAddresses} must have the same length (one resourceID for every address).
        Also, these arrays must be ordered in the way that {initialResourceIDs}[0] is the intended resourceID for {initialContractAddresses}[0].
     */
    constructor(
        address bridgeAddress,
        bytes32[] memory initialResourceIDs,
        address[] memory initialContractAddresses,
        address[] memory burnableContractAddresses
    ) public{
        require(initialResourceIDs.length == initialContractAddresses.length,
            "initialResourceIDs and initialContractAddresses len mismatch ");

        _bridgeAddress = bridgeAddress;

        for (uint256 i = 0; i < initialResourceIDs.length; i++) {
            _setResource(initialResourceIDs[i], initialContractAddresses[i]);
        }

        for (uint256 i = 0; i < burnableContractAddresses.length; i++) {
            _setBurnable(burnableContractAddresses[i]);
        }
    }

    /**
        @param depositNonce This ID will have been generated by the Bridge contract.
        @param destId ID of chain deposit will be bridged to.
        @return DepositRecord which consists of:
        - _tokenAddress Address used when {deposit} was executed.
        - _destinationChainID ChainID deposited tokens are intended to end up on.
        - _resourceID ResourceID used when {deposit} was executed.
        - _lenDestinationRecipientAddress Used to parse recipient's address from {_destinationRecipientAddress}
        - _destinationRecipientAddress Address tokens are intended to be deposited to on desitnation chain.
        - _depositer Address that initially called {deposit} in the Bridge contract.
        - _tokenID ID of ERC721.
        - _metaData Optional ERC721 metadata.
    */
    function getDepositRecord(uint64 depositNonce, uint8 destId) external view returns (bytes32){
        return _depositRecords[destId][depositNonce];
        
    }

    /**
        @notice A deposit is initiatied by making a deposit in the Bridge contract.
        @param destinationChainID Chain ID of chain token is expected to be bridged to.
        @param depositNonce This value is generated as an ID by the Bridge contract.
        @param depositer Address of account making the deposit in the Bridge contract.
        @param data Consists of: {resourceID}, {tokenID}, {lenDestinationRecipientAddress},
        and {destinationRecipientAddress} all padded to 32 bytes.
        @notice Data passed into the function should be constructed as follows:
        tokenID                                     uint256    bytes    0  - 32
        destinationRecipientAddress     length      uint256    bytes    32 - 64
        destinationRecipientAddress                   bytes    bytes    64 - (64 + len(destinationRecipientAddress))
        @notice If the corresponding {tokenAddress} for the parsed {resourceID} supports {_INTERFACE_ERC721_METADATA},
        then {metaData} will be set according to the {tokenURI} method in the token contract.
        @dev Depending if the corresponding {tokenAddress} for the parsed {resourceID} is
        marked true in {_burnList}, deposited tokens will be burned, if not, they will be locked.
     */
    function deposit(bytes32    resourceID,
                    uint8       destinationChainID,
                    uint64      depositNonce,
                    address     depositer,
                    bytes       calldata data
                    ) external onlyBridge returns(uint256,bytes memory,address,uint256){

        uint256         tokenID;
        uint256         fee; 
        bytes memory metaData;

        console.log("sol xxl 721 deposit");
        (tokenID,fee) = abi.decode(data, (uint,uint));
        address tokenAddress = _resourceIDToTokenContractAddress[resourceID];       
        require(_contractWhitelist[tokenAddress], "provided tokenAddress is not whitelisted");

        // Check if the contract supports metadata, fetch it if it does
        if (tokenAddress.supportsInterface(_INTERFACE_ERC721_METADATA)) {
            IERC721Metadata erc721 = IERC721Metadata(tokenAddress);
            metaData = bytes(erc721.tokenURI(tokenID));
        }


        if (_burnList[tokenAddress]) {
            console.log("sol xx1 burnERC721 ...");
            burnERC721(tokenAddress, tokenID);
        } else {
             
             console.log("sol xx1 lockERC721 ...");
             console.log("sol tokenAddress %s",tokenAddress);
             console.log("sol depositer %s",depositer);
             console.log("sol address(this) %s",address(this));
             console.log("sol tokenID %d",tokenID);

            lockERC721(tokenAddress, depositer, address(this), tokenID);
        }

        _depositRecords[destinationChainID][depositNonce] = keccak256(
            abi.encode(
                tokenAddress,
                destinationChainID,
                resourceID,
                depositer,
                tokenID,
                metaData,
                fee
            )
        );
        
        return (tokenID,metaData,tokenAddress,fee);

    }

    /**
        @notice Proposal execution should be initiated when a proposal is finalized in the Bridge contract.
        by a relayer on the deposit's destination chain.
        @param data Consists of {tokenID}, {resourceID}, {lenDestinationRecipientAddress},
        {destinationRecipientAddress}, {lenMeta}, and {metaData} all padded to 32 bytes.
        @notice Data passed into the function should be constructed as follows:
        tokenID                                     uint256    bytes    0  - 32
        destinationRecipientAddress     length      uint256    bytes    32 - 64
        destinationRecipientAddress                   bytes    bytes    64 - (64 + len(destinationRecipientAddress))
        metadata                        length      uint256    bytes    (64 + len(destinationRecipientAddress)) - (64 + len(destinationRecipientAddress) + 32)
        metadata                                      bytes    bytes    (64 + len(destinationRecipientAddress) + 32) - END
     */
    function executeProposal(bytes32 resourceID, bytes calldata data) external override onlyBridge returns(uint256){

        uint         tokenID;
        uint         lenDestinationRecipientAddress;
        bytes memory destinationRecipientAddress;
        uint         offsetMetaData;
        uint         lenMetaData;
        bytes memory metaData;
        uint256      fee;

        (tokenID, fee,lenDestinationRecipientAddress) = abi.decode(data, (uint, uint,uint));

        console.log(
                    "sol executeProposal tokenID=%d,fee=%d,lenDestinationRecipientAddress=%d",
                    tokenID, fee,lenDestinationRecipientAddress
                    );
            
        offsetMetaData = 96 + lenDestinationRecipientAddress;
        destinationRecipientAddress = bytes(data[96:offsetMetaData]);
        lenMetaData = abi.decode(data[offsetMetaData:], (uint));

        console.log(
                    "sol executeProposal lenMetaData=%d,offsetMetaData=%d",lenMetaData,offsetMetaData
                   );
        console.logBytes(data);
        console.logBytes(destinationRecipientAddress);

        metaData = bytes(data[offsetMetaData + 32:offsetMetaData + 32 + lenMetaData]);
        console.logBytes(metaData);

        bytes20 recipientAddress;
        assembly {
            recipientAddress := mload(add(destinationRecipientAddress, 0x20))
        }

        address tokenAddress = _resourceIDToTokenContractAddress[resourceID];
        require(_contractWhitelist[address(tokenAddress)], "provided tokenAddress is not whitelisted");

        if (_burnList[tokenAddress]) {
            console.log("sol mintERC721 %d",tokenID);
            mintERC721(tokenAddress, address(recipientAddress), tokenID, metaData);
        } else {
            console.log("sol releaseERC721 %d",tokenID);
            releaseERC721(tokenAddress, address(this), address(recipientAddress), tokenID);
        }
        return fee;
    }


    /**
        @notice Used to manually release ERC721 tokens from ERC721Safe.
        @param tokenAddress Address of token contract to release.
        @param recipient Address to release token to.
        @param tokenID The ERC721 token ID to release.
     */
    function withdraw(address tokenAddress, address recipient, uint tokenID) external override onlyBridge {
        releaseERC721(tokenAddress, address(this), recipient, tokenID);
    }

    /**
        @notice get the handler type
     */
    function getType() external override pure returns(HandleTypes) {
        //return ERC721;
        return IDepositExecute.HandleTypes.ERC721;
    }

}


// File contracts/handlers/WETHHandler.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;


/**
    @title Handles ERC20 deposits and deposit executions.
    @author ChainSafe Systems.
    @notice This contract is intended to be used with the Bridge contract.
 */
contract WETHHandler is IDepositExecute, HandlerHelpers{

    mapping(uint8 => mapping(uint64 => bytes32)) public _depositRecords;

    /**
        @param bridgeAddress Contract address of previously deployed Bridge.
        @param initialResourceIDs Resource IDs are used to identify a specific contract address.
        These are the Resource IDs this contract will initially support.
        @param initialContractAddresses These are the addresses the {initialResourceIDs} will point to, and are the contracts that will be
        called to perform various deposit calls.
        @param burnableContractAddresses These addresses will be set as burnable and when {deposit} is called, the deposited token will be burned.
        When {executeProposal} is called, new tokens will be minted.

        @dev {initialResourceIDs} and {initialContractAddresses} must have the same length (one resourceID for every address).
        Also, these arrays must be ordered in the way that {initialResourceIDs}[0] is the intended resourceID for {initialContractAddresses}[0].
     */
    constructor(
        address bridgeAddress,
        bytes32[] memory initialResourceIDs,
        address[] memory initialContractAddresses,
        address[] memory burnableContractAddresses
    ) public{
        require(
            initialResourceIDs.length == initialContractAddresses.length,
            "initialResourceIDs and initialContractAddresses len mismatch"
        );

        _bridgeAddress = bridgeAddress;

        for (uint256 i = 0; i < initialResourceIDs.length; i++) {
            _setResource(initialResourceIDs[i], initialContractAddresses[i]);
        }

        for (uint256 i = 0; i < burnableContractAddresses.length; i++) {
            _setBurnable(burnableContractAddresses[i]);
        }
    }

    /**
        @param depositNonce This ID will have been generated by the Bridge contract.
        @param destId ID of chain deposit will be bridged to.
        @return DepositRecord which consists of:
        - _tokenAddress Address used when {deposit} was executed.
        - _destinationChainID ChainID deposited tokens are intended to end up on.
        - _resourceID ResourceID used when {deposit} was executed.
        - _lenDestinationRecipientAddress Used to parse recipient's address from {_destinationRecipientAddress}
        - _destinationRecipientAddress Address tokens are intended to be deposited to on desitnation chain.
        - _depositer Address that initially called {deposit} in the Bridge contract.
        - _amount Amount of tokens that were deposited.
    */
    function getDepositRecord(uint64 depositNonce, uint8 destId)
        external view
        returns (bytes32)
    {
        return _depositRecords[destId][depositNonce];
    }

    /**
        @notice A deposit is initiatied by making a deposit in the Bridge contract.
        @param destinationChainID Chain ID of chain tokens are expected to be bridged to.
        @param depositNonce This value is generated as an ID by the Bridge contract.
        @param depositer Address of account making the deposit in the Bridge contract.
        @param data Consists of: {resourceID}, {amount}, {lenRecipientAddress}, and {recipientAddress}
        all padded to 32 bytes.
        @notice Data passed into the function should be constructed as follows:
        amount                      uint256     bytes   0 - 32
        recipientAddress length     uint256     bytes  32 - 64
        recipientAddress            bytes       bytes  64 - END
        @dev Depending if the corresponding {tokenAddress} for the parsed {resourceID} is
        marked true in {_burnList}, deposited tokens will be burned, if not, they will be locked.
     */
    function deposit(
        bytes32 resourceID,
        uint8 destinationChainID,
        uint64 depositNonce,
        address depositer,
        bytes calldata data
    ) external onlyBridge returns(uint256,address,uint256){
        uint256 amount;
        uint256 fee;

        (amount,fee) = abi.decode(data, (uint,uint));
        address tokenAddress = _resourceIDToTokenContractAddress[resourceID];
        require(
            _contractWhitelist[tokenAddress],
            "provided tokenAddress is not whitelisted"
        );

        _depositRecords[destinationChainID][depositNonce] = keccak256(
            abi.encode(
                tokenAddress,
                destinationChainID,
                resourceID,
                depositer,
                amount,
                fee
            )
        );

        return (amount,tokenAddress,fee);
    }



    /**
        @notice Proposal execution should be initiated when a proposal is finalized in the Bridge contract.
        by a relayer on the deposit's destination chain.
        @param data Consists of {resourceID}, {amount}, {lenDestinationRecipientAddress},
        and {destinationRecipientAddress} all padded to 32 bytes.
        @notice Data passed into the function should be constructed as follows:
        amount                                 uint256     bytes  0 - 32
        destinationRecipientAddress length     uint256     bytes  32 - 64
        destinationRecipientAddress            bytes       bytes  64 - END
     */
    function executeProposal(bytes32 resourceID, bytes calldata data)
        external
        override
        onlyBridge returns(uint256)
    {
        return 0;
    }

    /**
        @notice get the handler type
     */
    function getType() external override pure returns(HandleTypes) {
        //return WETH;
        return IDepositExecute.HandleTypes.WETH;
    }

}


// File contracts/Bridge.sol

// SPDX-License-Identifier: MIT
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;









/**
    @title Facilitates deposits, creation and votiing of deposit proposals, and deposit executions.
    @author ChainSafe Systems.
 */
contract Bridge is  HandlerHelpers {
    uint8 public _chainID;
    uint256 public _fee;
    uint256 public _expiry;
    bool private _isFirstSet;
    address private _owner;
    //xxl 01 add super signer
    address private _superSigner;
    bytes private _superSignerNodePublickey;
    string _version;

    enum ProposalStatus {
        Inactive,
        Active,
        Passed,
        Executed,
        Cancelled
    }

    struct Proposal {
        bytes32 _resourceID;
        bytes32 _dataHash;
        ProposalStatus _status;
        uint256 _proposedBlock;
    }

    // destinationChainID => number of deposits
    mapping(uint8 => uint64) public _depositCounts;
    // resourceID => handler address
    mapping(bytes32 => address) public _resourceIDToHandlerAddress;
    // depositNonce => destinationChainID => bytes
    mapping(uint64 => mapping(uint8 => bytes)) public _depositRecords;
    // destinationChainID + depositNonce => dataHash => Proposal
    mapping(uint72 => mapping(bytes32 => Proposal)) public _proposals;

    event DepositRecordERC20OrWETH(
        address _tokenAddress,
        uint8 _destinationChainID,
        bytes32 _resourceID,
        uint64 _depositNonce,
        address _depositer,
        uint256 _amount,
        uint256 _fee
    );

    event DepositRecordERC721(
        address _tokenAddress,
        uint8 _destinationChainID,
        bytes32 _resourceID,
        uint64 _depositNonce,
        address _depositer,
        uint256 _tokenId,
        bytes _metaData,
        uint256 _fee
    );


    event Deposit(
        uint8 indexed destinationChainID,
        bytes32 indexed resourceID,
        uint64 indexed depositNonce
    );
    event ProposalEvent(
        uint8 indexed originChainID,
        uint64 indexed depositNonce,
        ProposalStatus indexed status,
        bytes32 resourceID,
        bytes32 dataHash
    );

    event ChangeSuperSigner(
        address _oldSuperSigner,
        address _newSuperSigner,
        bytes _nodePublickey
    );

    bytes32 public constant WETH_RESOURCEID = keccak256("WETH_RESOURCEID");

    modifier onlyOwner() {
        _onlyOwner();
        _;
    }

    function _onlyOwner() private view {
        require(_owner == msg.sender, "sender doesn't have admin role");
    }

    modifier superSigner() {
       require(_superSigner == msg.sender, "sender doesn't have admin role");
        _;
    }


    function getVersion() external view returns(string memory){
        return _version;
    }

    /**
        @notice Initializes Bridge, creates and grants {msg.sender} the admin role,
        creates and grants {initialRelayers} the relayer role.
     */
    constructor() public payable {}

    /**
        @notice Initializes Bridge, creates and grants {msg.sender} the admin role,
        creates and grants {initialRelayers} the relayer role.
        @param chainID ID of chain the Bridge contract exists on.
        @param fee cross chain fee
        @param expiry cross chain expiry time setting.
     */
    function __Bridge_init(
        uint8 chainID,
        uint256 fee,
        uint256 expiry,
        address superSignerAddress,
        bytes memory superSignerNodePublickey,
        string memory version
    ) public {
        
        _chainID = chainID;
        _fee = fee;
        _expiry = expiry;
        _owner = msg.sender;
        _isFirstSet = false; 
        _version = version;
        if (superSignerNodePublickey.length != 33) {
            revert();
        }
        //xxl 01 add super signer
        emit ChangeSuperSigner(_superSigner,superSignerAddress, superSignerNodePublickey);
        _superSigner = superSignerAddress;
        _superSignerNodePublickey = superSignerNodePublickey;
    }

    //xxl 01 get current super signer
    function getCurrentSuperSigner() public view returns (address){
        return _superSigner;
    }

    function getSuperSignerNodePublickey() public view returns (bytes memory){
        return _superSignerNodePublickey;
    }


    //xxl 01 add super signer
    function changeSuperSigner(address newSuperSigner, bytes memory nodePublicKey) external onlyOwner {

        require(_superSigner != newSuperSigner, "super signer is not changed");
        require(nodePublicKey.length == 33, "is not publickey format");
        emit ChangeSuperSigner(_superSigner,newSuperSigner, nodePublicKey);
        _superSigner = newSuperSigner;
        _superSignerNodePublickey = nodePublicKey;
        
    }

    function changeAdmin(address newOwner) external onlyOwner {
        _owner = newOwner;
    }

    /**
        @notice Sets a new resource for handler contracts that use the IERCHandler interface,
        and maps the {handlerAddress} to {resourceID} in {_resourceIDToHandlerAddress}.
        @notice Only callable by an address that currently has the admin role.
        @param handlerAddress Address of handler resource will be set for.
        @param resourceID ResourceID to be used when making deposits.
        @param tokenAddress Address of contract to be called when a deposit is made and a deposited is executed.
     */
    function adminSetResource(
        address handlerAddress,
        bytes32 resourceID,
        address tokenAddress
    ) external onlyOwner {
        _resourceIDToHandlerAddress[resourceID] = handlerAddress;
        IERCHandler handler = IERCHandler(handlerAddress);
        handler.setResource(resourceID, tokenAddress);
    }

    /**
        @notice Sets a new resource for handler contracts that use the IGenericHandler interface,
        and maps the {handlerAddress} to {resourceID} in {_resourceIDToHandlerAddress}.
        @notice Only callable by an address that currently has the admin role.
        @param handlerAddress Address of handler resource will be set for.
        @param resourceID ResourceID to be used when making deposits.
        @param contractAddress Address of contract to be called when a deposit is made and a deposited is executed.
     */
    function adminSetGenericResource(
        address handlerAddress,
        bytes32 resourceID,
        address contractAddress,
        bytes4 depositFunctionSig,
        bytes4 executeFunctionSig
    ) external onlyOwner {
        _resourceIDToHandlerAddress[resourceID] = handlerAddress;
        IGenericHandler handler = IGenericHandler(handlerAddress);
        handler.setResource(
            resourceID,
            contractAddress,
            depositFunctionSig,
            executeFunctionSig
        );
    }

    /**
        @notice Sets a resource as burnable for handler contracts that use the IERCHandler interface.
        @notice Only callable by an address that currently has the admin role.
        @param handlerAddress Address of handler resource will be set for.
        @param tokenAddress Address of contract to be called when a deposit is made and a deposited is executed.
     */
    function adminSetBurnable(address handlerAddress, address tokenAddress)
        external
        onlyOwner
    {
        IERCHandler handler = IERCHandler(handlerAddress);
        handler.setBurnable(tokenAddress);
    }

    /**
        @notice Returns a proposal.
        @param originChainID Chain ID deposit originated from.
        @param depositNonce ID of proposal generated by proposal's origin Bridge contract.
        @param dataHash Hash of data to be provided when deposit proposal is executed.
        @return Proposal which consists of:
        - _dataHash Hash of data to be provided when deposit proposal is executed.
        - _yesVotes Number of votes in favor of proposal.
        - _noVotes Number of votes against proposal.
        - _status Current status of proposal.
     */
    function getProposal(
        uint8 originChainID,
        uint64 depositNonce,
        bytes32 dataHash
    ) external view returns (Proposal memory) {
        uint72 nonceAndID = (uint72(depositNonce) << 8) | uint72(originChainID);
        return _proposals[nonceAndID][dataHash];
    }

    /**
        @notice Changes deposit fee.
        @notice Only callable by admin.
        @param newFee Value {_fee} will be updated to.
     */
    function adminChangeFee(uint256 newFee) external onlyOwner {

        require(_fee != newFee, "Current fee is equal to new fee");
        _fee = newFee;
    }

    function getFee() external view returns (uint256) {
        return _fee;
    }

    /**
        @notice Used to manually withdraw funds from ERC safes.
        @param handlerAddress Address of handler to withdraw from.
        @param tokenAddress Address of token to withdraw.
        @param recipient Address to withdraw tokens to.
        @param amountOrTokenID Either the amount of ERC20 tokens or the ERC721 token ID to withdraw.
     */
    function adminWithdraw(
        address handlerAddress,
        address tokenAddress,
        address recipient,
        uint256 amountOrTokenID
    ) external onlyOwner {
        IERCHandler handler = IERCHandler(handlerAddress);
        handler.withdraw(tokenAddress, recipient, amountOrTokenID);
    }

    function _depoistWeth(        
        uint8 destinationChainID,
        bytes32 resourceID,
        bytes calldata data,
        address handler,
        uint64 depositNonce
    ) internal{

        uint256 amount;
        uint256 fee;
        address tokenAddress;

        //amount = abi.decode(data,(uint)); 
        WETHHandler wethHander = WETHHandler(handler);
        (amount, tokenAddress,fee) = wethHander.deposit(
            resourceID,
            destinationChainID,
            depositNonce,
            msg.sender,
            data
        );

        require(msg.value == _fee + amount, "fee + amount is not match");
        emit DepositRecordERC20OrWETH(
            tokenAddress,
            destinationChainID,
            resourceID,
            depositNonce,
            msg.sender,
            amount,
            fee
        );
    }

    function _depoistERC20(        
        uint8 destinationChainID,
        bytes32 resourceID,
        bytes calldata data,
        address handler,
        uint64 depositNonce,
        bool isL1ToL2
    ) internal{

        uint256 amount;
        uint256 fee;
        address tokenAddress;

        console.log("sol _depoistERC20 0 ... ");
        ERC20Handler erc20Hander = ERC20Handler(handler);
        (amount, tokenAddress,fee) = erc20Hander.deposit(
            resourceID,
            destinationChainID,
            depositNonce,
            msg.sender,
            data
        );

        //deposit weth
        if(!isL1ToL2){
            _payWethFee(fee);
        }
        
        emit DepositRecordERC20OrWETH(
            tokenAddress,
            destinationChainID,
            resourceID,
            depositNonce,
            msg.sender,
            amount,
            fee
        );
    }

    function _depoistERC721(        
        uint8 destinationChainID,
        bytes32 resourceID,
        bytes calldata data,
        address handler,
        uint64 depositNonce,
        bool isL1ToL2
    ) internal{

        uint256 tokenId;
        uint256 fee;
        bytes memory metadata;
        address tokenAddress;

        console.log("sol _depoistERC20 0 ... ");
        ERC721Handler erc721Hander = ERC721Handler(handler);
        (tokenId, metadata,tokenAddress,fee) = erc721Hander.deposit(
            resourceID,
            destinationChainID,
            depositNonce,
            msg.sender,
            data
        );

        //deposit weth
        if(!isL1ToL2){
            _payWethFee(fee);
        }
        
        emit DepositRecordERC721(
            tokenAddress,
            destinationChainID,
            resourceID,
            depositNonce,
            msg.sender,
            tokenId,
            metadata,
            fee
        );
    }

    function _payWethFee(uint256 fee) internal{

        require(fee >= _fee,"fee must large than setting");

        address handler = _resourceIDToHandlerAddress[WETH_RESOURCEID];
        ERC20Handler erc20Hander = ERC20Handler(handler);
        erc20Hander.burnERC20(WETH_RESOURCEID, msg.sender, fee);
    }

    function _rewardWethFee(uint256 fee) internal{

        //console.log("xxl _rewardWethFee ... ");
        address handler = _resourceIDToHandlerAddress[WETH_RESOURCEID];
        ERC20Handler erc20Hander = ERC20Handler(handler);
        erc20Hander.mintERC20(WETH_RESOURCEID, block.coinbase, fee);

    }

    function _verfiyExecuteProposal(
        uint8 chainID,
        uint64 depositNonce,
        bytes calldata data,
        bytes32 resourceID,
        bytes[] memory sig,
        bytes memory superSig
    ) internal view{

        //xxl 01 add superSig validation
        _verifySuper(
            chainID,
            depositNonce,
            data,
            resourceID,
            superSig,
            _superSigner
        );
       
        bool isAbiterVerifierd = false;
        isAbiterVerifierd = _verifyAbter(
            chainID,
            depositNonce,
            data,
            resourceID,
            sig
        );
        require(isAbiterVerifierd, "Verify abiter do not pass ");


    }

    function _verifyBatch(
        uint8 chainID,
        uint64[] memory depositNonce,
        bytes[] calldata data,
        bytes32[] memory resourceID,
        bytes[] memory sig,
        bytes memory superSig
    ) internal view {

        //xxl 01 add superSig validation
        _verifySuperBatch(
            chainID,
            depositNonce,
            data,
            resourceID,
            superSig,
            _superSigner
        );

        bool isAbiterVerifierd = false;
        isAbiterVerifierd = _verifyAbterBatch(
            chainID,
            depositNonce,
            data,
            resourceID,
            sig
        );

        require(isAbiterVerifierd, "Verify abiter do not pass");
    }

    //xxl TODO 5 为了防止攻击，在执行成功时候再退钱
    function _excuteBatch(
        uint8 chainID,
        uint64[] memory depositNonce,
        bytes[] calldata data,
        bytes32[] memory resourceID,
        address currentRelayer
    ) internal {

        ProposalStatus[] memory arrProposalStatus;
        bytes32[] memory arrDataHash;
        arrProposalStatus = new ProposalStatus[](depositNonce.length);
        arrDataHash = new bytes32[](depositNonce.length);

        uint256 totalFee;
        //xxl TODO 4 修改比较大 再议
        for (uint256 i = 0; i < depositNonce.length; i++) {
            address handler = _resourceIDToHandlerAddress[resourceID[i]];
            uint72 nonceAndID = (uint72(depositNonce[i]) << 8) | uint72(chainID);
            //bytes32 dataHash = keccak256(abi.encodePacked(handler, data[i]));
            Proposal storage proposal = _proposals[nonceAndID][keccak256(abi.encodePacked(handler, data[i]))];
            require(proposal._status != ProposalStatus.Executed,"Proposal must have Passed status");

            proposal._status = ProposalStatus.Executed;
            arrProposalStatus[i] = proposal._status;
            arrDataHash[i] = keccak256(abi.encodePacked(handler, data[i]));

            if (resourceID[i] == WETH_RESOURCEID) {
                totalFee +=  _executeWeth(data[i]);
            } else {
                IDepositExecute depositHandler = IDepositExecute(handler);
                totalFee += depositHandler.executeProposal(resourceID[i], data[i]);
            }

            emit ProposalEvent(
                chainID,
                depositNonce[i],
                arrProposalStatus[i],
                resourceID[i],
                arrDataHash[i]
            );
            
        }

        delete arrProposalStatus;
        delete arrDataHash;

        // require(gasUsed < totalFee, "gas used is larger than fee");
        _safeTransferETH(currentRelayer,totalFee);

    }

    function _executeWeth(bytes calldata data) internal returns(uint256) {
        uint256 amount;
        uint256 fee;
        uint256 lenDestinationRecipientAddress;
        bytes memory destinationRecipientAddress;

        (amount,fee, lenDestinationRecipientAddress) = abi.decode(
            data,
            (uint256,uint256,uint256)
        );
        destinationRecipientAddress = bytes(
            data[96:96 + lenDestinationRecipientAddress]
        );

        bytes20 recipientAddress;
        assembly {
            recipientAddress := mload(add(destinationRecipientAddress, 0x20))
        }
        _safeTransferETH(address(recipientAddress), amount);

        return fee;

    }

    /**
        @notice Transfers eth in the contract to the specified addresses. The parameters addrs and amounts are mapped 1-1.
        This means that the address at index 0 for addrs will receive the amount (in WEI) from amounts at index 0.
        @param addrs Array of addresses to transfer {amounts} to.
        @param amounts Array of amonuts to transfer to {addrs}.
     */
    function transferFunds(
        address payable[] calldata addrs,
        uint256[] calldata amounts
    ) external onlyOwner {
        for (uint256 i = 0; i < addrs.length; i++) {
            addrs[i].transfer(amounts[i]);
        }
    }

    /**
     * @dev Internal accounting function for moving around L1 ETH.
     *
     * @param _to L1 address to transfer ETH to
     * @param _value Amount of ETH to send to
     */
    function _safeTransferETH(address _to, uint256 _value) public {
        (bool success, ) = _to.call{value: _value}(new bytes(0));

        // console.log("transfer is start ");
        // console.log(success);
        // console.log("transfer is end ");

        require(
            success,
            "TransferHelper::safeTransferETH: ETH transfer failed"
        );
    }

    //xxl TODO 3 solidity 省gas的多签方式
    /**
     * @dev set abiter list
     * @param _addressList abiter public list
     */
    function setAbiterList(
        address[] memory _addressList,
        uint256 _addressCount,
        bytes[] memory _sig
    ) external {
        if (_isFirstSet == false) {
            _onlyOwner();
            _isFirstSet = true;
        } else {
            require(_verifyAbiterSwift(_addressList,_sig), "abiter verify error");
        }

        _signers = _addressList;
        _totalCount = _addressCount;
    }

    /**
     * @dev get abiter list
     */
    function getAbiterList() external view returns (address[] memory) {
        return _signers;
    }

    // get eth balance of contract
    function getBalanceOfContract() public view returns (uint256) {
        return address(this).balance;
    }

    // send value to address
    function sendValue(address payable addr, uint256 amount)
        public
        payable
        onlyOwner
    {
        addr.transfer(amount);
    }

    function isDuplicated(bytes[] memory _sig) external pure returns (bool) {
        return _isDuplicated(_sig);
    }

    fallback() external payable {}
    receive() external payable {}
}


// File contracts/BridgeL1.sol

// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;


/**
    @title Facilitates deposits, creation and votiing of deposit proposals, and deposit executions.
    @author ChainSafe Systems.
 */
contract BridgeL1 is Bridge {
    
    /**
        @notice Initiates a transfer using a specified handler contract.
        @notice Only callable when Bridge is not paused.
        @param destinationChainID ID of chain deposit will be bridged to.
        @param resourceID ResourceID used to find address of handler to be used for deposit.
        @param data Additional data to be passed to specified handler.
     */
    function deposit(
        uint8 destinationChainID,
        bytes32 resourceID,
        bytes calldata data
    ) external payable {

        console.log("sol xxl deposit ...");

        address handler = _resourceIDToHandlerAddress[resourceID];
        require(handler != address(0), "resourceID not mapped to handler");
     
        uint64 depositNonce = ++_depositCounts[destinationChainID];
        _depositRecords[depositNonce][destinationChainID] = data;
        IDepositExecute depositHandler = IDepositExecute(handler);

        //weth layer1 -> layer2
        if(depositHandler.getType() == IDepositExecute.HandleTypes.WETH) {
            console.log("sol xxl deposit weth ...");
            _depoistWeth(destinationChainID,resourceID,data,handler,depositNonce);
        //erc20 layer1 -> layer2 
        }else if(depositHandler.getType() == IDepositExecute.HandleTypes.ERC20){
            console.log("sol xxl deposit erc20 ...");
            _depoistERC20(destinationChainID,resourceID,data,handler,depositNonce,true);
        }else if(depositHandler.getType() == IDepositExecute.HandleTypes.ERC721){
            console.log("sol xxl deposit erc721 ...");
            _depoistERC721(destinationChainID,resourceID,data,handler,depositNonce,true);
        }else { 
            //TODO other
        } 
    }

    /**
        @notice Executes a deposit proposal that is considered passed using a specified handler contract.
        @notice Only callable by relayers when Bridge is not paused.
        @param chainID ID of chain deposit originated from.
        @param resourceID ResourceID to be used when making deposits.
        @param depositNonce ID of deposited generated by origin Bridge contract.
        @param data Data originally provided when deposit was made.
        @param sig signature for abiter.
        @notice Proposal must have Passed status.
        @notice Hash of {data} must equal proposal's {dataHash}.
        @notice Emits {ProposalEvent} event with status {Executed}.
     */
    function executeProposalBatch(
        uint8 chainID,
        uint64[] memory depositNonce,
        bytes[] calldata data,
        bytes32[] memory resourceID,
        bytes[] memory sig,
        bytes memory superSig
    ) public {
        _verifyBatch(chainID, depositNonce, data, resourceID, sig,superSig);
        _excuteBatch(chainID, depositNonce, data, resourceID,block.coinbase);
    }


}