Beast @0.8 - 0.2 TPU Quality.ini

# generated by PrusaSlicer 2.4.1-beta1+x64 on 2022-02-06 at 16:57:37 UTC
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bed_custom_model = /Users/mel/Documents/My_Prints/Chiron_Modifications/Beds/Chiron_Bed_V2.stl
bed_custom_texture = /Users/mel/Documents/My_Prints/Chiron_Modifications/Beds/Chiron.svg
bed_shape = 0x0,405x0,405x405,0x405
bed_temperature = 50
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
between_objects_gcode = 
bottom_fill_pattern = monotonic
bottom_solid_layers = 3
bottom_solid_min_thickness = 0.6
bridge_acceleration = 1000
bridge_angle = 0
bridge_fan_speed = 0
bridge_flow_ratio = 0.95
bridge_speed = 30
brim_separation = 0
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
color_change_gcode = M600
colorprint_heights = 
complete_objects = 0
cooling = 1
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_acceleration = 1000
default_filament_profile = "Prusament PLA"
default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
deretract_speed = 50
disable_fan_first_layers = 0
dont_support_bridges = 1
draft_shield = disabled
duplicate_distance = 6
elefant_foot_compensation = 0
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
end_gcode = M104 S0  ;extruder heater off\nM140 S0  ;heated bed heater off (if you have it)\nG91      ;relative positioning\nG1 Z+10 F3600 ;move Z up a bit\nG90              ;absolute positioning\nG1 X0 F3000    ; get the head off the bed\nG1 F3000 Y400    ;kick the bed out\nM84        ;steppers off
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0.94
external_perimeter_speed = 30
external_perimeters_first = 0
extra_loading_move = -2
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 45
extruder_colour = ""
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1.05
extrusion_width = 0.94
fan_always_on = 0
fan_below_layer_time = 5
filament_colour = #29b2b2
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 0
filament_density = 1.21
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = "Beast @0.8 - 0.2 TPU Quality"
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = FLEX
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = (Unknown)
filament_wipe = nil
fill_angle = 45
fill_density = 20%
fill_pattern = grid
first_layer_acceleration = 1000
first_layer_acceleration_over_raft = 0
first_layer_bed_temperature = 50
first_layer_extrusion_width = 0.94
first_layer_height = 0.2
first_layer_speed = 30
first_layer_speed_over_raft = 30
first_layer_temperature = 204
full_fan_speed_layer = 0
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 30
gcode_comments = 0
gcode_flavor = marlin
gcode_label_objects = 1
gcode_resolution = 0.0125
gcode_substitutions = 
high_current_on_filament_swap = 0
host_type = octoprint
infill_acceleration = 1000
infill_anchor = 2.5
infill_anchor_max = 15
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.94
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 30
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_gcode = 
layer_height = 0.4
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 1250,960
machine_max_acceleration_y = 1250,960
machine_max_acceleration_z = 400,200
machine_max_feedrate_e = 80,120
machine_max_feedrate_x = 180,100
machine_max_feedrate_y = 180,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 10,4.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_fan_speed = 100
max_layer_height = 0.6
max_print_height = 450
max_print_speed = 100
max_volumetric_speed = 11.5
min_fan_speed = 50
min_layer_height = 0.15
min_print_speed = 10
min_skirt_length = 4
mmu_segmented_region_max_width = 0
notes = 
nozzle_diameter = 0.8
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_[nozzle_diameter]mm-{layer_height}mm_TPU_{print_time}.gcode
overhangs = 1
parking_pos_retraction = 92
pause_print_gcode = M601
perimeter_acceleration = 800
perimeter_extruder = 1
perimeter_extrusion_width = 0.94
perimeter_speed = 30
perimeters = 2
physical_printer_settings_id = Anycubic
post_process = 
print_host = 
print_settings_id = Beast @0.8 - 0.2 TPU Quality
printer_model = MK3S
printer_notes = \n
printer_settings_id = Beast - @0.8 Nozzle TPU
printer_technology = FFF
printer_variant = 0.6
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
remaining_times = 0
resolution = 0
retract_before_travel = 1.5
retract_before_wipe = 70%
retract_layer_change = 0
retract_length = 6
retract_length_toolchange = 4
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 450
retract_restart_extra = 0.1
retract_restart_extra_toolchange = 0
retract_speed = 50
seam_position = aligned
silent_mode = 0
single_extruder_multi_material = 0
single_extruder_multi_material_priming = 0
skirt_distance = 2
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
slowdown_below_layer_time = 3
small_perimeter_speed = 30
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.94
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
start_filament_gcode = "; Filament gcode\n"
start_gcode = M104 S140  ;start the nozzle preheat and don't wait\nG21        ;metric values\nG90        ;absolute positioning\nM82        ;set extruder to absolute mode\nM107       ;start with the fan off\nG28        ;home all\nM190 S[first_layer_bed_temperature] ; set wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z15.0 F3600          ;move the platform down 15mm\nG92 E0                  ;zero the extruded length\nG1 F250 E40              ;extrude 40mm of feed stock\nG92 E0                  ;zero the extruded length again
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.55
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_pattern = auto
support_material_interface_spacing = 0.3
support_material_interface_speed = 80%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 30
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 55
support_material_with_sheath = 0
support_material_xy_spacing = 80%
temperature = 204
template_custom_gcode = 
thick_bridges = 1
thin_walls = 0
threads = 12
thumbnails = 
toolchange_gcode = 
top_fill_pattern = monotonic
top_infill_extrusion_width = 0.94
top_solid_infill_speed = 30
top_solid_layers = 4
top_solid_min_thickness = 0.9
travel_speed = 180
travel_speed_z = 0
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
wipe_into_infill = 0
wipe_into_objects = 0
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 125
wiping_volumes_extruders = 70,70
wiping_volumes_matrix = 0
xy_size_compensation = 0
z_offset = 0