EHVClock.yaml

# My github: https://github.com/trip5
substitutions:
  name: vfd-clock
  friendly_name: VFD-Clock
  comment: "EHVClock from Trip5"
  project_version: "2024.12.09"
  project_name: Trip5.EspHomeVfdClock
  waiting: "EHVClock" # shows when waiting for time

  # Time zone can be Olsen type ("Asia/Seoul") # Check https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
  # or POSIX format: (ie "KST-9" & "PST8PDT,M3.2.0/2:00:00,M11.1.0/2:00:00" & "AST4ADT,M3.2.0,M11.1.0")
  # Most can be viewed here: https://github.com/nayarsystems/posix_tz_db/blob/master/zones.csv
  # or here: https://support.cyberdata.net/portal/en/kb/articles/010d63c0cfce3676151e1f2d5442e311
  # If you need to make a custom POSIX format you can look here: https://developer.ibm.com/articles/au-aix-posix/)
  # or even better, use this POSIX Generator (courtesy of TopYuan): https://www.topyuan.top/posix
  time_zone: "AST4ADT,M3.2.0,M11.1.0"

  # time and date formats: https://esphome.io/components/time/?highlight=strftime#strftime and https://strftime.org/
  # time_format: "%H:%M" (13:25) / "%H:%M:%S" (13:25:59) / "%I:%M%p" (01:25PM) / "%l:%M%p" (1:25PM)
  time_format12: "%l:%M%p"
  time_format24: "%H:%M:%S"
  # date_format: "%m.%d" (02.28) / "%y.%m.%d" (23.02.28) / "%b %d" (Feb 08) / "%a %d" (Tue 08)
  date_format: "%b %d" # Jan 01
  # date_formatA, if turned on, will split the time of the date display with the main date (and occur before):
  date_formatA: "%a" # Mon
  # Special note that ESPHome can't seem to use any locale for time other than English. In the text_sensors section, you can find filters that allow substitutions.
  # Please be sure to add those needed characters to the Replace or Custom characters as well, or those special characters will not be displayed!

  # Pins for Display
  clk_pin: GPIO12
  mosi_pin: GPIO14
  cs_pin: GPIO13
  reset_pin: GPIO15
  # Pins & config for I2C RTC
  sda_pin: GPIO5
  scl_pin: GPIO4
  rtc_address: "0x32"
  i2c_frequency: "400kHz"
  # Other Pins
  status_led_pin: GPIO2
  button_pin: GPIO0

  # Display Options
  intensity: "200" # Initial brightness 0 to 255 (default: 200)
  remove_spaces: "true" # remove leading or trailing spaces (default: false)
  scroll_delay: "500, 500" # optional initial & subsequent delays when scrolling (in milliseconds) (default: 1500, 500) (first text = both numbers combined)
  # Replace characters: Unicode character:Fubata byte (characters that already exist on the device, can use decimal, hex, or binary in MSB-LSB order)
  replace: "°:0b11101111"
  # Custom characters: Unicode character:column1,column2,column3,column4,column5 (binary painting from bottom to top)
  custom: "₿:62,107,42,107,20;금:117,85,85,85,119;목:55,53,61,53,119;수:20,18,113,18,20;오:34,37,61,37,34;요:34,61,37,61,34;월:38,45,102,72,95;일:18,21,114,64,71;전:121,71,89,68,95;토:95,85,117,85,81;화:22,123,22,127,8;후:38,42,107,42,38"

esphome:
  name: ${name}
  comment: "${comment}"
  project:
    name: "${project_name}"
    version: "${project_version}"
  min_version: 2023.11.0
  on_boot:
    - priority: 600
      then:
        - lambda: 'id(display_off) = false;'
        - rx8025.read_time:
    - priority: -100
      then:
        - wait_until:
            condition:
              - lambda: 'return (id(my_time).now().is_valid());'
        - rx8025.write_time:

esp8266:
  board: esp12e
  restore_from_flash: True

wifi:
  networks:
    - ssid: !secret wifi_ssid
      password: !secret wifi_password
  reboot_timeout: 0s # reboot if no wifi (must be disabled for wifi to be turned off)
  enable_on_boot: True
  id: wifi_id
  ap:
    ssid: ${name}
    password: !secret ap_password
    ap_timeout: 10s # this has to be short, especially if using Stop Seek Wifi
  on_connect:
    - logger.log: "Wifi connected"
    - light.turn_off: led1
    - delay: 1s
    - button.press: display_ip
    - lambda: |-
        id(wifi_stop_seek_time_count) = 0;
        id(my_time)->update();
  on_disconnect:
    - if:
        condition:
          - switch.is_on: wifi_stop_seek
        then:
          - logger.log: "Wifi disconnected - will be disabled soon (stop seek is on)..."
        else:
          - logger.log: "Wifi disconnected"
    - delay: 1s
    - button.press: display_ip

external_components:
# Use Trip5's VFDClock VFD8MD06INK ESPHome Component (for the Display)
  - source:
      type: git
      url: https://github.com/trip5/EspHome-VFD-Clock
      ref: main
    refresh: 60s
    components: [ vfd8md06inkm ]
# Prefer a local source (only use one source)
#  - source:
#      type: local
#      path: my-components/vfdclock
#    components: [ vfd8md06inkm ]
#    refresh: 1s

# Use Trip5's RX8025 ESPHome Component (for the RTC)
  - source:
      type: git
      url: https://github.com/trip5/esphome-rx8025
      ref: main
    refresh: 60s
    components: [ rx8025 ]

time:
  - platform: sntp # use SNTP as a time source
    id: my_time
    timezone: "${time_zone}"
    update_interval: 24h # This seems like the longest safe amount of time - actual configured update happens in interval section (or when changing time zone)
  - platform: rx8025
    id: my_time_rx
    update_interval: never
    timezone: "${time_zone}"
    address: ${rtc_address}
    battery1.5v: True

script:
  - id: sync_the_time
    mode: restart
    then:
      - lambda: 'id(my_time)->call_setup();'
      - rx8025.write_time:
  - id: display_off_activate
    mode: restart
    then:
      - lambda: |-
          ESP_LOGD("main", "Display Off activated");
          id(display_off) = true;
  - id: display_off_deactivate
    mode: restart
    then:
      - lambda: |-
          ESP_LOGD("main", "Display Off deactivated");
          id(display_off_time_count) = 0;
          id(display_off) = false;

# Enable Home Assistant API
api:
  # delete next 2 lines if not using HA API encryption
  encryption:
    key: !secret encryption_key
  reboot_timeout: 0s # Must be disabled to allow the Wifi enable/disable to function

mdns:
  disabled: False # needs to be on to connect to HA

logger:
  level: NONE
# Logging is disabled to save memory but you can easily enable logging (and stop the various sensors/switches from spamming the log) by deleting the above line and uncommening the lines below
# Note that increasing the level uses up memory (which this device has very little available) and may cause errors and/or crashing - please note it's also disabled in the web_server section
#  level: DEBUG
#  logs:
#    sensor: ERROR
#    text_sensor: NONE
#    switch: NONE
#    light: NONE
#    number: NONE

web_server:
  port: 80
  ota: True
  include_internal: False # True will expose more than needed to the Web UI
  version: 2 # version 3 is much larger but possible if local is False
  local: True # will download www.js and serve it directly from the clock
  log: False # disabling in the WebUI to save memory

ota:
  - platform: esphome
    password: !secret ota_password
    on_begin:
      then:
        - lambda: 'id(vf_display).print("OTA...");'
        - logger.log: "OTA Update started."
    on_progress:
      then:
        - lambda: 'if (x > 9) { id(vf_display).printf("OTA %d%%", (int)x); }'
        - logger.log:
            format: "OTA progress %0.1f%%"
            args: ["x"]
    on_end:
      then:
        - lambda: 'id(vf_display).print("OTA Done");'
        - logger.log: "OTA end"
    on_error:
      then:
        - lambda: 'id(vf_display).print("OTAError");'
        - logger.log:
            format: "OTA update error %d"
            args: ["x"]

captive_portal:

text_sensor:
  - platform: version
    name: "${friendly_name} ESPHome Version"
    hide_timestamp: True
    entity_category: diagnostic
  - platform: wifi_info
    ip_address:
      id: wifi_ip
      name: "${friendly_name} IP Address"
      entity_category: diagnostic
    ssid:
      id: wifi_ssid
      name: "${friendly_name} SSID"
      entity_category: diagnostic
  - platform: template
    name: "${friendly_name} ${project_name} Version"
    lambda: 'return to_string("${project_version}");'
    entity_category: diagnostic
    update_interval: 1h
  - platform: template
    name: "${friendly_name} Time Zone"
    lambda: 'return {"${time_zone}"};'
    entity_category: diagnostic
    update_interval: 1h
  # Below this point are text sensors to hold time and date and allow for substitutions... you can delete/edit the filters, just don't delete the entire text sensor
  # The github repo should also contain methods to change the time into other localized formats.
  - platform: template
    id: time_text
    name: "${friendly_name} Replacement Time Text"
    entity_category: diagnostic
    update_interval: never
    internal: True
    filters:
      - lambda: |-
          // Korean generally puts the 오후/오전 before the time, so let's just use a different format entirely "%p%l%M" (PM1:25) and run a substitute on it
          if (id(hour12_mode).state == 1) {
            int offset = 0;
            if (id(tzoffset_on).state != 0) {
              offset = (int)(60 * 60 * (id(tzoffset).state));
            }
            std::time_t tz1time = (id(my_time).now().timestamp + offset);
            std::tm *tz1time_astm = localtime(&tz1time);
            char display_tmdt[20];
            strftime(display_tmdt, 20, "%p%l:%M", tz1time_astm);
            std::string tmdt(display_tmdt);
            return tmdt;
          } else {
            return x;
          }
      - append: ""
      - prepend: ""
      - substitute:
        - "AM -> 오전"
        - "PM -> 오후"
  - platform: template
    id: date_text
    name: "${friendly_name} Replacement Date Text"
    entity_category: diagnostic
    update_interval: never
    internal: True
    filters:
      - append: "일"
      - prepend: ""
      - substitute:
        - "Jan -> 1월"
        - "Feb -> 2월"
        - "Mar -> 3월"
        - "Apr -> 4월"
        - "May -> 5월"
        - "Jun -> 6월"
        - "Jul -> 7월"
        - "Aug -> 8월"
        - "Sep -> 9월"
        - "Oct -> 10월"
        - "Nov -> 11월"
        - "Dec -> 12월"
  - platform: template
    id: dateA_text
    name: "${friendly_name} Replacement Date A Text"
    entity_category: diagnostic
    update_interval: never
    internal: True
    filters:
      - append: ""
      - prepend: ""
      - substitute:
        - "Sun -> 일요일"
        - "Mon -> 월요일"
        - "Tue -> 화요일"
        - "Wed -> 수요일"
        - "Thu -> 목요일"
        - "Fri -> 금요일"
        - "Sat -> 토요일"

output:
  - platform: esp8266_pwm
    id: statusled
    pin:
      number: ${status_led_pin}
      inverted: True

light:
  - platform: monochromatic
    id: led1
    name: "${friendly_name} Status LED"
    output: statusled
    internal: True

preferences:
  flash_write_interval: 15s # 0 does immediate write to memory with no mem buffer (not recommended) (only saves when persistent variables have changed)

i2c:
  sda: ${sda_pin}
  scl: ${scl_pin}
  scan: True
  id: i2cbus
  frequency: ${i2c_frequency}

spi:
  clk_pin: ${clk_pin}
  mosi_pin: ${mosi_pin}

# Some info how to handle multi_click options: https://community.home-assistant.io/t/esphome-button-held-double-press/136083/10
binary_sensor:
  - platform: status
    name: "${friendly_name} Status"
  - platform: gpio
    pin: 
      number: ${button_pin}
      inverted: True
    name: "${friendly_name} Button"
    filters:
      - delayed_on: 10ms
      - delayed_off: 10ms
    on_multi_click:
      #Click will toggle Date display mode (or turn screen on again)
      - timing:
          - ON for at most 0.5s
          - OFF for at least 0.5s
        then:
          if:
            condition:
              - lambda: 'return id(display_off);'
            then:
              - script.execute: display_off_deactivate
            else:
              - switch.toggle: date_display_mode
      #Double-Click will toggle 12-hour mode (or turn screen on again)
      - timing:
          - ON for at most 1s
          - OFF for at most 0.5s
          - ON for at most 1s
          - OFF for at least 0.1s
        then:
          if:
            condition:
              - lambda: 'return id(display_off);'
            then:
              - script.execute: display_off_deactivate
            else:
              - switch.toggle: hour12_mode
      #Click once, then Hold will toggle TZ Offset (or turn screen on again)
      - timing:
          - ON for at most 1s
          - OFF for at most 0.5s
          - ON for at least 1s
        then:
          if:
            condition:
              - lambda: 'return id(display_off);'
            then:
              - script.execute: display_off_deactivate
            else:
              - switch.toggle: tzoffset_on
      #Hold 2s will show the IP (or other wifi status) (or turn screen on again)
      - timing:
          - ON for at least 2s
          - OFF for at least 0.5s
        then:
          if:
            condition:
              - lambda: 'return id(display_off);'
            then:
              - script.execute: display_off_deactivate
            else:
              - button.press: display_ip
      #Hold 5s will toggle the wifi timeout (or turn screen on again)
      - timing:
          - ON for at least 5s
        then:
          if:
            condition:
              - lambda: 'return id(display_off);'
            then:
              - script.execute: display_off_deactivate
            else:
              - switch.toggle: wifi_stop_seek

display:
  - platform: vfd8md06inkm
    id: vf_display
    cs_pin: ${cs_pin}
    reset_pin: ${reset_pin}
    intensity: ${intensity}
    remove_spaces: ${remove_spaces}
    scroll_delay: ${scroll_delay}
    replace: ${replace}
    custom: ${custom}
    update_interval: 1s    # Update interval (optional)
    lambda: |-
      // Display the message if all conditions are met
      if (id(my_time).now().is_valid() && !id(display_off)) {
        if ((id(message_alive_time) != 0) && (id(message_clock_time_count) >= id(message_clock_time))) {
          ESP_LOGD("main", "Showing Message");
          id(message_display_time_count) += 1;
          id(message_alive_time_count) += 1;
          std::string message_text = id(message);
          it.print(message_text.c_str());
          if (id(message_display_time_count) >= id(message_display_time)) {
            id(message_display_time_count) = 0;
            id(message_clock_time_count) = 0;
            if (id(message_alive_time_count) >= id(message_alive_time)) {
              id(message_alive_time_count) = 0;
              id(message_alive_time) = 0;
              ESP_LOGD("main", "Message Alive Time finished.");
            }
          }
        } else {
            if ((id(message_alive_time) != 0) && (id(message_clock_time) != 0)) {
              id(message_clock_time_count) += 1;
              id(message_alive_time_count) += 1;
            }
            // apply offset if needed https://community.home-assistant.io/t/multiple-time-zones/435315/12
            int offset = 0;
            if (id(tzoffset_on).state != false) {
              offset = (int)(60 * 60 * (id(tzoffset).state));
            }
            std::time_t tz1time = (id(my_time).now().timestamp + offset);
            std::tm *tz1time_astm = localtime(&tz1time);
            char display_tmdt[20];
            // check if the date should be displayed
            if ((id(time_display_count) >= (id(time_display_time).state)) && (id(date_display_mode).state != false)) {
              id(date_display_count) += 1;
              // if date_formatA is on, display it for 50% of the time first, after the 1st...
              if ((id(date_A_mode).state == true) && (id(date_display_count) <= (id(date_display_time).state / 2))) {
                strftime(display_tmdt, 20, "${date_formatA}", tz1time_astm);
                // check if Date A text replacement should be made
                if (id(replace_mode_auto).state == true) {
                  std::string tmdt(display_tmdt);
                  id(dateA_text).publish_state(tmdt);
                  strcpy(display_tmdt, id(dateA_text).state.c_str());
                }
              } else {
                strftime(display_tmdt, 20, "${date_format}", tz1time_astm);
                // check if Date text replacement should be made
                if (id(replace_mode_auto).state == true) {
                  std::string tmdt(display_tmdt);
                  id(date_text).publish_state(tmdt);
                  strcpy(display_tmdt, id(date_text).state.c_str());
                }
              }
            } else {
              id(date_display_count) = 0;
              id(time_display_count) += 1;
              // choose which time format to display
              if (id(hour12_mode).state == true) {
                strftime(display_tmdt, 20, "${time_format12}", tz1time_astm);
              } else {
                strftime(display_tmdt, 20, "${time_format24}", tz1time_astm);
              }
              // check if Time text replacement should be made
              if (id(replace_mode_auto).state == true) {
                std::string tmdt(display_tmdt);
                id(time_text).publish_state(tmdt);
                strcpy(display_tmdt, id(time_text).state.c_str());
              }
            }
            // print the date / time
            // it.printf((32 / 2), (8 / 2), id(default_font), TextAlign::CENTER, "%s", display_tmdt);
            it.print(display_tmdt);
            if (((id(date_display_count) >= id(date_display_time).state) && (id(date_display_mode).state != false)) || ((id(time_display_count) >= id(time_display_time).state) && (id(date_display_mode).state == false))) {
              id(time_display_count) = 0;
              // check if Replace Interval is active, count or reset, when date display is finished - or after the interval, depending
              if (id(replace_interval).state > 0) {
                id(replace_interval_count) += 1;
                if (id(replace_interval_count) >= id(replace_interval).state) {
                  id(replace_interval_count) = 0;
                  id(replace_mode_auto).toggle();
              }
            }
          }
        }
      } else {
        if (!id(display_off)) {
          it.print("${waiting}");
        }
      }
      // This next bit handles the display_off stuff
      if (id(display_off)) {
        it.clearscreen();
        it.intensity(0);
      } else {
        it.intensity(id(brightness).state);
      }

interval:
  - interval: 1min # check if the time should be synced, and if so, do it
    then:
      - lambda: |-
          id(sync_time_count) += 1;
          if (id(sync_time_count) >= (id(sync_time).state * 60)) {
            id(sync_time_count) = 0;
            id(sync_the_time).execute();
          }
  - interval: 1s # check if the wifi should be turned off, and if so, do it (or turn on if stop seek has been disabled) and blink led while seeking wifi / also, check if it's time to turn off display
    then:
      - lambda: |-
          if (id(wifi_stop_seek).state == true && !id(wifi_id).is_connected() && !id(wifi_id).is_disabled()){
            id(wifi_stop_seek_time_count) += 1;
            if (id(wifi_stop_seek_time_count) >= id(wifi_stop_seek_time).state) {
              id(wifi_stop_seek_time_count) = 0;
              id(wifi_id)->disable();
              id(display_ip).press();
            }
          }
          if (id(wifi_stop_seek).state == false && id(wifi_id).is_disabled()) {
            id(wifi_stop_seek_time_count) = 0;
            id(wifi_id)->enable();
            id(display_ip).press();
          }
          if (!id(wifi_id).is_connected() && !id(wifi_id).is_disabled()) {
            id(seek_blink_led) += 1;
            if (id(wifi_stop_seek).state == false) {
              if (id(seek_blink_led) % 1 == 0) {
                auto call = id(led1).toggle();
                call.perform();
              }
            } else {
              if (id(seek_blink_led) % 2 == 0) {
                auto call = id(led1).toggle();
                call.perform();
              }
            }
          }
          if (id(led1).current_values.is_on() && (id(wifi_id).is_connected() || id(wifi_id).is_disabled())) {
              auto call = id(led1).turn_off();
              call.perform();
          }
          if (id(my_time).now().is_valid() && !id(display_off)) {
            if (id(display_off_no_wifi_time).state != 0 || id(display_off_time).state != 0) {
              id(display_off_time_count) = id(display_off_time_count) + 1;
            }
            if ((id(display_off_time).state != 0 && id(display_off_time_count) >= (id(display_off_time).state * 60)) || (id(display_off_no_wifi_time).state != 0 && id(display_off_time_count) >= id(display_off_no_wifi_time).state && (!id(wifi_id).is_connected() || id(wifi_id).is_disabled()))) {
              id(display_off_activate).execute();
            }
          }

globals:
  - id: replace_interval_count
    type: uint8_t
    restore_value: False
    initial_value: '0'
  - id: message
    type: std::string
    restore_value: False
    initial_value: ''
  - id: message_display_time
    type: uint8_t
    restore_value: False
    initial_value: '0'
  - id: message_clock_time
    type: uint8_t
    restore_value: False
    initial_value: '0'
  - id: message_alive_time
    type: uint8_t
    restore_value: False
    initial_value: '0'
  - id: message_display_time_count
    type: uint8_t
    restore_value: False
    initial_value: '0'
  - id: message_clock_time_count
    type: uint8_t
    restore_value: False
    initial_value: '0'
  - id: message_alive_time_count
    type: uint8_t
    restore_value: False
    initial_value: '0'
  - id: time_display_count
    type: uint8_t
    restore_value: False
    initial_value: '0'
  - id: date_display_count
    type: uint8_t
    restore_value: False
    initial_value: '0'
  - id: sync_time_count
    type: uint8_t
    restore_value: False
    initial_value: '0'
# Wifi Stop Seek Variables
  - id: wifi_stop_seek_time_count
    type: uint8_t
    restore_value: False
    initial_value: '0'
  - id: seek_blink_led
    type: uint8_t
    restore_value: False
    initial_value: '0'
# Display Off Variables
  - id: display_off
    type: bool
    restore_value: False
    initial_value: 'false'
  - id: display_off_time_count
    type: uint16_t
    restore_value: False
    initial_value: '0'

button:
  - platform: restart
    id: restart_button
    name: "${friendly_name} Restart"
    entity_category: diagnostic
  - platform: template
    id: display_ip
    name: "Display IP Address"
    internal: True
    entity_category: diagnostic
    on_press:
      - if:
          condition:
            not:
              wifi.connected:
          then:
            - lambda: |-
                if (id(wifi_id).is_disabled()) {
                  id(message) = ("Wifi Off");
                } else {
                  id(message) = ("No Wifi");
                }
                id(message_alive_time) = 3;
                id(message_display_time) = 3;
                id(message_clock_time) = 0;
          else:
            - lambda: |-
                id(message) = ("IP:" + id(wifi_ip).state + "...");
                id(message_alive_time) = 8;
                id(message_display_time) = 8;
                id(message_clock_time) = 0;

switch:
  - platform: template
    name: "${friendly_name} 12 Hour Mode"
    id: hour12_mode
    restore_mode: RESTORE_DEFAULT_OFF
    optimistic: True
    turn_on_action:
        - lambda: |-
            ESP_LOGD("main", "12 Hour Mode On");
    turn_off_action:
        - lambda: |-
            ESP_LOGD("main", "12 Hour Mode Off");
  - platform: template
    name: "${friendly_name} Date A Mode"
    id: date_A_mode
    restore_mode: RESTORE_DEFAULT_OFF
    turn_on_action:
        - lambda: |-
            ESP_LOGD("main", "Date A Mode On");
    turn_off_action:
        - lambda: |-
            ESP_LOGD("main", "Date A Mode Off");
  - platform: template
    name: "${friendly_name} Replacement Mode"
    id: replace_mode
    restore_mode: RESTORE_DEFAULT_OFF
    optimistic: True
    turn_on_action:
        - lambda: |-
            ESP_LOGD("main", "Replace Mode On");
            id(replace_mode_auto).turn_on();
            auto call = id(replace_interval).make_call();
            call.set_value(0);
            call.perform();
    turn_off_action:
        - lambda: |-
            ESP_LOGD("main", "Replace Mode Off");
            id(replace_mode_auto).turn_off();
  - platform: template
    id: replace_mode_auto
    restore_mode: RESTORE_DEFAULT_OFF
    optimistic: True
    internal: True
    turn_on_action:
        - lambda: |-
            ESP_LOGD("main", "Replace Mode Auto On");
    turn_off_action:
        - lambda: |-
            ESP_LOGD("main", "Replace Mode Auto Off");
  - platform: template
    name: "${friendly_name} Time Zone Offset On"
    id: tzoffset_on
    restore_mode: RESTORE_DEFAULT_OFF
    optimistic: True
    turn_on_action:
        - lambda: |-
            ESP_LOGD("main", "TZ Offset On");
    turn_off_action:
        - lambda: |-
            ESP_LOGD("main", "TZ Offset Off");
  - platform: template
    name: "${friendly_name} Date Display Mode"
    id: date_display_mode
    restore_mode: RESTORE_DEFAULT_OFF
    optimistic: True
    turn_on_action:
        - lambda: |-
            ESP_LOGD("main", "Date on");
            id(message) = ("Date on");
            id(message_alive_time) = 1;
            id(message_display_time) = 1;
            id(message_clock_time) = 0;
    turn_off_action:
        - lambda: |-
            ESP_LOGD("main", "Date off");
            id(message) = ("Date off");
            id(message_alive_time) = 1;
            id(message_display_time) = 1;
            id(message_clock_time) = 0;
  - platform: template
    name: "${friendly_name} Wifi Stop Seek"
    id: wifi_stop_seek
    restore_mode: RESTORE_DEFAULT_OFF
    optimistic: True
    turn_on_action:
        - delay: 1s
        - lambda: |-
            ESP_LOGD("main", "Wifi Stop Seek on");
            id(message) = ("StopSeek");
            id(message_alive_time) = 1;
            id(message_display_time) = 1;
            id(message_clock_time) = 0;
    turn_off_action:
        - delay: 1s
        - lambda: |-
            ESP_LOGD("main", "Wifi Stop Seek off");
            id(message) = ("Seek...");
            id(message_alive_time) = 1;
            id(message_display_time) = 1;
            id(message_clock_time) = 0;

number:
  - platform: template
    name: "${friendly_name} Brightness"
    id: brightness
    restore_value: True
    optimistic: True
    step: 5
    min_value: 0
    max_value: 255
    initial_value: ${intensity}
    mode: slider
    set_action:
      then:
        - lambda: |-
            ESP_LOGD("main", "Brightness: %.0f", x);
        - script.execute: display_off_deactivate
  - platform: template
    name: "${friendly_name} Time Display Time"
    id: time_display_time
    restore_value: True
    optimistic: True
    step: 1
    min_value: 1
    max_value: 60
    initial_value: 8
    mode: box
    unit_of_measurement: seconds
    set_action:
      then:
        - lambda: |-
            ESP_LOGD("main", "Time Display Time: %.0f seconds", x);
  - platform: template
    name: "${friendly_name} Date Display Time"
    id: date_display_time
    restore_value: True
    optimistic: True
    step: 1
    min_value: 1
    max_value: 60
    initial_value: 2
    mode: box
    unit_of_measurement: seconds
    set_action:
      then:
        - lambda: |-
            ESP_LOGD("main", "Date Display Time: %.0f seconds", x);
  - platform: template
    name: "${friendly_name} Auto Replacement Interval"
    id: replace_interval
    restore_value: True
    optimistic: True
    step: 1
    min_value: 0
    max_value: 10
    initial_value: 0
    mode: box
    unit_of_measurement: intervals
    set_action:
      then:
        - lambda: |-
            ESP_LOGD("main", "Auto Replacement Interval: %.0f", x);
            if (x > 0) {
              id(replace_mode).turn_off();
            }
  - platform: template
    name: "${friendly_name} Time Zone Offset"
    id: tzoffset
    restore_value: True
    optimistic: True
    step: 0.25
    min_value: -26
    max_value: 26
    initial_value: 0
    mode: box
    unit_of_measurement: hours
    set_action:
      then:
        - lambda: |-
            ESP_LOGD("main", "Time Zone Offset: %.2f hours", x);
  - platform: template
    name: "${friendly_name} Time Sync Interval"
    id: sync_time
    restore_value: True
    optimistic: True
    step: 1
    min_value: 1
    max_value: 24
    initial_value: 8
    mode: box
    unit_of_measurement: hours
    set_action:
      then:
        - lambda: |-
            ESP_LOGD("main", "Time Sync Interval: %.0f hours", x);
  - platform: template
    name: "${friendly_name} Wifi Stop Seek Time"
    id: wifi_stop_seek_time
    restore_value: True
    optimistic: True
    step: 1
    min_value: 1
    max_value: 60
    initial_value: 180
    mode: box
    unit_of_measurement: seconds
    set_action:
      then:
        - lambda: |-
            ESP_LOGD("main", "Wifi Stop Seek Time: %.0f seconds", x);
  - platform: template
    name: "${friendly_name} Display Off Time (0 Disable)"
    id: display_off_time
    restore_value: True
    optimistic: True
    step: 5
    min_value: 0
    max_value: 60
    initial_value: 0
    mode: box
    unit_of_measurement: minutes
    set_action:
      then:
        - lambda: |-
            ESP_LOGD("main", "Display Off Time: %.0f minutes", x);
        - script.execute: display_off_deactivate
  - platform: template
    name: "${friendly_name} Display Off When No Wifi Time (seconds) (0 Disable)"
    id: display_off_no_wifi_time
    restore_value: True
    optimistic: True
    step: 5
    min_value: 0
    max_value: 180
    initial_value: 60
    mode: box
    unit_of_measurement: seconds
    set_action:
      then:
        - lambda: |-
            ESP_LOGD("main", "Display Off No Wifi Time: %.0f seconds", x);
        - script.execute: display_off_deactivate