Sacado: Rework hieararchical performance tests #7384

etphipp · 2020-05-15T19:54:14Z

Fixes performance bug with hierarchical-dfad
Performance tests can now run multiple forms of hierarchical parallelism
Added new version of advection test with non-Fad basis functions

Direct writes between view's had a performance bug when hierarchical-dfad was enabled where the correct thread striding wasn't being used. This fixes that.

Tests were reorganized so that different kinds of hierarchical parallelism can be used in the same test. The old versions are still in the repo, but are not compiled. Once I determine the old ones are no longer needed, I'll remove them in a later commit.

trilinos-autotester · 2020-05-15T20:17:35Z

Status Flag 'Pre-Test Inspection' - Auto Inspected - Inspection Is Not Necessary for this Pull Request.

trilinos-autotester · 2020-05-15T20:31:57Z

Status Flag 'Pull Request AutoTester' - Failure: Timed out waiting for job Trilinos_pullrequest_cuda_9.2 to start: Total Wait = 603

Other jobs have been previously started - We must stop them...
Terminating Build Teuchos: Preferred way of printing docstrings #6702 of Jenkins job Trilinos_pullrequest_gcc_4.8.4 on Jenkins server at https://ascic-jenkins.sandia.gov
Terminating Build Zoltan2: Fixes for #6440 #6514 of Jenkins job Trilinos_pullrequest_intel_17.0.1 on Jenkins server at https://ascic-jenkins.sandia.gov
Terminating Build Applied kokkos patches to get things compiling for cuda and bitsets f… #4939 of Jenkins job Trilinos_pullrequest_gcc_4.9.3_SERIAL on Jenkins server at https://ascic-jenkins.sandia.gov
Terminating Build Sacado: Add method to clear parameter library. #4786 of Jenkins job Trilinos_pullrequest_gcc_7.2.0 on Jenkins server at https://ascic-jenkins.sandia.gov
Terminating Build Fix TPetra SpMV Benchmark when OpenMP is Not Enabled during Compilation #975 of Jenkins job Trilinos_pullrequest_gcc_8.3.0 on Jenkins server at https://ascic-jenkins.sandia.gov

trilinos-autotester · 2020-05-15T23:45:00Z

Status Flag 'Pull Request AutoTester' - Failure: Timed out waiting for job Trilinos_pullrequest_cuda_9.2 to start: Total Wait = 603

Other jobs have been previously started - We must stop them...
Terminating Build Tempus: Add Improved Doc for DIRK #6710 of Jenkins job Trilinos_pullrequest_gcc_4.8.4 on Jenkins server at https://ascic-jenkins.sandia.gov
Terminating Build STK: install error #6522 of Jenkins job Trilinos_pullrequest_intel_17.0.1 on Jenkins server at https://ascic-jenkins.sandia.gov
Terminating Build Adding the unit tests for the clean_workspace tool #4947 of Jenkins job Trilinos_pullrequest_gcc_4.9.3_SERIAL on Jenkins server at https://ascic-jenkins.sandia.gov
Terminating Build Updating Branch from develop #4794 of Jenkins job Trilinos_pullrequest_gcc_7.2.0 on Jenkins server at https://ascic-jenkins.sandia.gov
Terminating Build Revert "Remove Unnecessary Amesos2 dependence on Amesos" #983 of Jenkins job Trilinos_pullrequest_gcc_8.3.0 on Jenkins server at https://ascic-jenkins.sandia.gov

trilinos-autotester · 2020-05-19T18:50:09Z

Status Flag 'Pull Request AutoTester' - User Requested Retest - Label AT: RETEST will be reset after testing.

trilinos-autotester · 2020-05-19T18:52:25Z

Status Flag 'Pull Request AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6739
Status: STARTED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6551
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 4976
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 4823
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1013
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4313
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 688
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2455
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2466
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Using Repos:

Repo: TRILINOS (etphipp/Trilinos)

Pull Request Author: etphipp

trilinos-autotester · 2020-05-19T20:00:42Z

Status Flag 'Pull Request AutoTester' - Jenkins Testing: 1 or more Jobs FAILED

Note: Testing will normally be attempted again in approx. 2 Hrs 30 Mins. If a change to the PR source branch occurs, the testing will be attempted again on next available autotester run.

Pull Request Auto Testing has FAILED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6739
Status: FAILED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6551
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 4976
Status: FAILED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 4823
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1013
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4313
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 688
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2455
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2466
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.8.4 # 6739 (click to expand)


git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Sacado'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST='Sacado'
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

Build name               = PR-7384-test-Trilinos_pullrequest_gcc_4.8.4-6739

Cur dir                  = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

Binary dir               = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxGCC4.8.4TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-7.novalocal&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_gcc_4.8.4-6739&field3=buildstamp&compare3=61&value3=20200519-1850-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_4.8.4-6739&field2=buildstamp&compare2=61&value2=20200519-1850-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_4.8.4-6739&field2=buildstamp&compare2=61&value2=20200519-1850-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

.......................................... Size of output: 241K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

..................................................  Size: 149K

..................................................  Size: 199K

..................................................  Size: 249K

..................................................  Size: 299K

........................ Size of output: 324K

Error(s) when building project

CMake Warning at /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype/simple_testing.cmake:202 (message):

Build failed with error 1
build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #6739

PULLREQUESTNUM = 7384

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/superlu/4.3/gcc/4.8.4/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype

Traceback (most recent call last):

File "/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 697, in 

returnValue = run()

File "/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 690, in run

'package_subproject_list.cmake'])

File "/projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib/python2.7/subprocess.py", line 540, in check_call

raise CalledProcessError(retcode, cmd)

subprocess.CalledProcessError: Command '['ctest', '-S', 'simple_testing.cmake', '-Dbuild_name=PR-7384-test-Trilinos_pullrequest_gcc_4.8.4-6739', '-Dskip_by_parts_submit=OFF', '-Dskip_update_step=ON', '-Ddashboard_model=Experimental', '-Ddashboard_track=Pull Request', '-DPARALLEL_LEVEL=20', '-DTEST_PARALLEL_LEVEL=10', '-Dbuild_dir=/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/pull_request_test', '-Dconfigure_script=/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxGCC4.8.4TestingSettings.cmake', '-Dpackage_enables=../packageEnables.cmake', '-Dsubprojects_file=../TFW_single_configure_support_scripts/package_subproject_list.cmake']' returned non-zero exit status 255

Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE

Console Output (last 100 lines) : Trilinos_pullrequest_intel_17.0.1 # 6551 (click to expand)


skip_update_step         = ON
skip_upload_config_files = OFF
skip_clean_build_dir     = ON
Subproject count         = 53
Dashboard model          = Experimental
Dashboard track          = Pull Request
Running configuration:
/projects/sems/install/rhel6-x86_64/sems/utility/cmake/3.10.3/bin/cmake 
  -C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxIntelTestingSettings.cmake"
  -C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/packageEnables.cmake"
  -DTrilinos_ENABLE_TESTS:BOOL=ON
  -DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2
  -G "Ninja"
  /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos
CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos
CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic158&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_intel_17.0.1-6551&field3=buildstamp&compare3=61&value3=20200519-1850-Pull Request
CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_intel_17.0.1-6551&field2=buildstamp&compare2=61&value2=20200519-1850-Pull Request
CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_intel_17.0.1-6551&field2=buildstamp&compare2=61&value2=20200519-1850-Pull Request
Starting configure step.
   Each . represents 1024 bytes of output
    ..................................................  Size: 50K
    ..................................................  Size: 100K
    ..................................................  Size: 150K
    ..................................................  Size: 200K
    .............................................. Size of output: 245K
configure submit error = 0
Configure suceeded.
Starting build step.
   Each symbol represents 1024 bytes of output.
    ..................................................  Size: 49K
    ..................................................  Size: 99K
    ..................................................  Size: 149K
    ..................................................  Size: 199K
    ..................................................  Size: 249K
    ..................................................  Size: 300K
    ..................................................  Size: 349K
    ..................................................  Size: 400K
    ..................................................  Size: 450K
    ..................................................  Size: 499K
    ..................................................  Size: 550K
    ..................................................  Size: 600K
    ..................................................  Size: 649K
    ..................................................  Size: 700K
    ..................................................  Size: 749K
    ..................................................  Size: 799K
    ..................................................  Size: 849K
    ..................................................  Size: 899K
    ..................................................  Size: 949K
    ..................................................  Size: 999K
    ..................................................  Size: 1049K
    ..................................................  Size: 1099K
    ..................................................  Size: 1150K
    ..................................................  Size: 1199K
    ..................................................  Size: 1250K
    ..................................................  Size: 1299K
    ..................................................  Size: 1350K
    ..................................................  Size: 1400K
    .............................................. Size of output: 1446K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
ects/sems/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/intel/17.0.1/mpich/3.2/parallel/include
MKL_LIB = /projects/sems/install/rhel6-x86_64/sems/compiler/intel/17.0.1/base/mkl/lib/intel64
MODULE_VERSION_STACK = 3.2.10
SEMS_MPICH_ROOT = /projects/sems/install/rhel6-x86_64/sems/compiler/intel/17.0.1/mpich/3.2
JOB_COOWNERS_EMAILS = [email protected],[email protected]
SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.4.7
SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.6.6
SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/intel/17.0.1/mpich/3.2/parallel/lib
GIT_URL = https://github.com/trilinos/Trilinos
SEMS_INTEL_LOCAL_PYTHON_VERSION = 2.6.6
SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/boost/1.63.0/intel/17.0.1/base/lib
SEMS_GCC_LOCAL_COMPILER_VERSION = 4.4.7
SNLSYSTEM = cee
MPIF77 = mpif77
SEMS_HDF5_ROOT = /projects/sems/install/rhel6-x86_64/sems/tpl/hdf5/1.10.6/intel/17.0.1/mpich/3.2/parallel
SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/scotch/6.0.3/intel/17.0.1/mpich/3.2/nopthread_64bit_parallel/include
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/4.9.3:sems-intel/17.0.1:sems-mpich/3.2:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2
WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@tmp
SEMS_CMAKE_VERSION = 3.10.3
HISTCONTROL = ignoredups
SERIAL_CXX = icpc
PWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #6551
PULLREQUESTNUM = 7384
SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/intel/17.0.1/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.9.3_SERIAL # 4976 (click to expand)


CHANGED_PACKAGES_PT_LIST='Sacado'
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

Build name               = PR-7384-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-4976

Cur dir                  = /scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel6-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxGCC4.9.3TestingSettingsSERIAL.cmake"

-C "/scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic115&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-4976&field3=buildstamp&compare3=61&value3=20200519-1851-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-4976&field2=buildstamp&compare2=61&value2=20200519-1851-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-4976&field2=buildstamp&compare2=61&value2=20200519-1851-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

................. Size of output: 166K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 100K

..................................................  Size: 149K

..................................................  Size: 199K

..................................................  Size: 249K

..................................................  Size: 300K

..................................................  Size: 349K

..................................................  Size: 399K

..................................................  Size: 449K

..................................................  Size: 499K

..................................................  Size: 550K

..................................................  Size: 599K

..................................................  Size: 650K

..................................................  Size: 699K

..................................................  Size: 749K

..................................................  Size: 799K

..................................................  Size: 849K

........... Size of output: 860K

Error(s) when building project

CMake Warning at /scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype/simple_testing.cmake:202 (message):

Build failed with error 1
build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

gcc/4.9.3/base

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/4.9.3:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/base:sems-netcdf/4.7.3/base:sems-metis/5.1.0/base:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #4976

PULLREQUESTNUM = 7384

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/gcc/4.9.3/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype

Traceback (most recent call last):

File "/scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 697, in 

returnValue = run()

File "/scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 690, in run

'package_subproject_list.cmake'])

File "/projects/sems/install/rhel6-x86_64/sems/compiler/python/2.7.9/lib/python2.7/subprocess.py", line 540, in check_call

raise CalledProcessError(retcode, cmd)

subprocess.CalledProcessError: Command '['ctest', '-S', 'simple_testing.cmake', '-Dbuild_name=PR-7384-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-4976', '-Dskip_by_parts_submit=OFF', '-Dskip_update_step=ON', '-Ddashboard_model=Experimental', '-Ddashboard_track=Pull Request', '-DPARALLEL_LEVEL=20', '-DTEST_PARALLEL_LEVEL=10', '-Dbuild_dir=/scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/pull_request_test', '-Dconfigure_script=/scratch/trilinos/jenkins/ascic115/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxGCC4.9.3TestingSettingsSERIAL.cmake', '-Dpackage_enables=../packageEnables.cmake', '-Dsubprojects_file=../TFW_single_configure_support_scripts/package_subproject_list.cmake']' returned non-zero exit status 255

Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_7.2.0 # 4823 (click to expand)


TRILINOS_DIR=/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/commonTools/framework/../..

TRILINOS_SCRIPTS_DIR=/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/commonTools/framework/../..

TRIBITS_DIR=/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/commonTools/framework/../../cmake/tribits
A) Generate the Trilinos Packages definition and depencencies XML file
Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Sacado'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST='Sacado'
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

Build name               = PR-7384-test-Trilinos_pullrequest_gcc_7.2.0-4823

Cur dir                  = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/pull_request_test

Parallel level           = 13

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel6-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxGCC7.2.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic158&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_gcc_7.2.0-4823&field3=buildstamp&compare3=61&value3=20200519-1851-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_7.2.0-4823&field2=buildstamp&compare2=61&value2=20200519-1851-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_7.2.0-4823&field2=buildstamp&compare2=61&value2=20200519-1851-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

.......................... Size of output: 225K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

..................................................  Size: 149K

..................................................  Size: 199K

..................................... Size of output: 237K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

/1.10.6/gcc/7.2.0/openmpi/1.10.1/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/scotch/6.0.3/gcc/7.2.0/openmpi/1.10.1/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/7.2.0:sems-openmpi/1.10.1:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #4823

PULLREQUESTNUM = 7384

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/gcc/7.2.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_8.3.0 # 1013 (click to expand)


Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Sacado'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST='Sacado'
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

Build name               = PR-7384-test-Trilinos_pullrequest_gcc_8.3.0-1013

Cur dir                  = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxGCC8.3.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic166&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_gcc_8.3.0-1013&field3=buildstamp&compare3=61&value3=20200519-1851-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_8.3.0-1013&field2=buildstamp&compare2=61&value2=20200519-1851-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_8.3.0-1013&field2=buildstamp&compare2=61&value2=20200519-1851-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

.......................... Size of output: 225K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

..................................................  Size: 149K

..................................................  Size: 199K

..................................................  Size: 249K

..................................................  Size: 299K

..................................................  Size: 349K

..................................................  Size: 399K

..................................................  Size: 449K

...... Size of output: 456K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

[email protected],[email protected]

SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.8.5

SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.7.5

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/netcdf/4.7.3/gcc/8.3.0/openmpi/1.10.1/parallel/lib

GIT_BRANCH = origin/develop

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/boost/1.66.0/gcc/8.3.0/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5

SNLSYSTEM = cee

MPIF77 = mpif77

SEMS_HDF5_ROOT = /projects/sems/install/rhel7-x86_64/sems/tpl/hdf5/1.10.6/gcc/8.3.0/openmpi/1.10.1/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/scotch/6.0.3/gcc/8.3.0/openmpi/1.10.1/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/8.3.0:sems-openmpi/1.10.1:sems-boost/1.66.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #1013

PULLREQUESTNUM = 7384

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/superlu/4.3/gcc/8.3.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_cuda_9.2 # 4313 (click to expand)


    ..................................................  Size: 3399K
    ..................................................  Size: 3450K
    ..................................................  Size: 3500K
    ..................................................  Size: 3550K
    ..................................................  Size: 3600K
    ..................................................  Size: 3649K
    ..................................................  Size: 3700K
    ..................................................  Size: 3749K
    ..................................................  Size: 3800K
    ..................................................  Size: 3849K
    ..................................................  Size: 3900K
    ..................................................  Size: 3949K
    . Size of output: 3950K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
0 ride10 ride10 ride10 ride10
METIS_ROOT = /home/projects/ppc64le-pwr8/metis/5.0.1/gcc/7.2.0
NODE_OWNER_EMAIL = [email protected]
LSB_EXIT_PRE_ABORT = 99
TRILINOS_SOURCE_REPO = https://github.com/etphipp/Trilinos
PARMETIS_HOME = /home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
FC_VERSION = 7.2.0
LSB_JOBFILENAME = /ascldap/users/trilinos/.lsbatch/1589914322.4084
BLAS_ROOT = /home/projects/ppc64le-pwr8/netlib/3.8.0/gcc/7.2.0
GIT_CHECKOUT_DIR = Trilinos
LSB_AFFINITY_HOSTFILE = /ascldap/users/trilinos/.lsbatch/1589914322.4084.hostAffinityFile
PARMETIS_ROOT = /home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
LSF_ENVDIR = /opt/lsf/conf
MPI_VENDOR = openmpi
PYTHON = /home/projects/ppc64le/python/2.7.12/bin/python
CXX_VENDOR = gcc
HDF5_ROOT = /home/projects/ppc64le-pwr8-nvidia/hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
HOSTTYPE = LINUXPPC64LE
SSH_CLIENT = 205.137.81.17 44298 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
LSF_LIM_API_NTRIES = 1
PATH = /ascldap/users/rabartl/install/white-ride/cmake-3.11.2/bin:/ascldap/users/rabartl/install/white-ride/ninja-1.8.2/bin:/home/projects/ppc64le/valgrind/3.12.0/bin:/home/projects/ppc64le/cmake/3.9.6/bin:/home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8/metis/5.0.1/gcc/7.2.0/bin:/home/projects/ppc64le-pwr8-nvidia/netcdf/4.6.1/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/pnetcdf-exo/1.9.0/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le/java/ibm/sdk/8.0.0/bin:/home/projects/ppc64le/papi/5.5.1/bin:/home/projects/ppc64le/gcc/7.2.0/bin:/home/projects/ppc64le/binutils/2.30.0/bin:/home/projects/ppc64le-pwr8-nvidia/cuda/9.2.88/bin:/home/projects/ppc64le/python/2.7.12/bin:/home/projects/ppc64le/git/2.10.1/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/etc:/usr/local/bin:/usr/bin:/opt/ibutils/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
LSB_QUEUE = rhel7F
LSF_JOB_TIMESTAMP_VALUE = 1589914322
LSB_EXEC_HOSTTYPE = LINUXPPC64LE
GIT_PREVIOUS_SUCCESSFUL_COMMIT = da5877912f823e50821e858ebda56f98b599f7f3
LSB_DJOB_HOSTFILE = /ascldap/users/trilinos/.lsbatch/1589914322.4084.hostfile
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
LSF_LIBDIR = /opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/lib
CGNS_VERSION = 20180521
LSB_SUB_USER = trilinos
NODE_LABELS = ride-trilinos trilinos-ride
GIT_BRANCH_2 = origin/pull_request_changes
GIT_CHECKOUT_DIR_1 = TFW_single_configure_support_scripts
GIT_CHECKOUT_DIR_2 = TFW_testing_single_configure_prototype
JOB_OWNER_EMAIL = [email protected]
PULLREQUEST_CDASH_TRACK = Pull Request
BUILD_ID = 4313
SBD_KRB5CCNAME_VAL = 
LSB_RES_GET_FANOUT_INFO = Y
RUN_DISPLAY_URL = https://ascic-jenkins.sandia.gov/job/trilinos-folder/job/Trilinos_pullrequest_cuda_9.2/4313/display/redirect
JOB_COOWNERS_EMAILS = [email protected],[email protected]
LSB_BATCH_JID = 4084
MPI_HOME = /home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
SUPERLU_HOME = /home/projects/ppc64le-pwr8/superlu/4.3.0/gcc/7.2.0
F77_VENDOR = gcc
KRB5CCNAME = FILE:/tmp/krb5cc_91724_bqNHm8maFh
BINUTILS_VERSION = 2.30.0
GIT_BRANCH = origin/develop
CMAKE_ROOT = /home/projects/ppc64le/cmake/3.9.6
BOOST_ROOT = /home/projects/ppc64le-pwr8/boost/1.65.1/gcc/7.2.0
VALGRIND_ROOT = /home/projects/ppc64le/valgrind/3.12.0
MPIF77 = /home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin/mpif77
PARMETIS_VERSION = 4.0.3
LSB_JOBNAME = trilinos-folder/Trilinos_pullrequest_cuda_9.2
LOADEDMODULES = git/2.10.1:python/2.7.12:cuda/9.2.88:binutils/2.30.0:gcc/7.2.0:papi/5.5.1:java/ibm/sdk/8.0.0:openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:pnetcdf-exo/1.9.0/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:zlib/1.2.8:hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:netcdf/4.6.1/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:cgns/20180521/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:netlib/3.8.0/gcc/7.2.0:superlu/4.3.0/gcc/7.2.0:boost/1.65.1/gcc/7.2.0:metis/5.0.1/gcc/7.2.0:parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:cmake/3.9.6:valgrind/3.12.0:devpack/20180521/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
WORKSPACE_TMP = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@tmp
GIT_BRANCH_1 = origin/master
CUDA_MANAGED_FORCE_DEVICE_ALLOC = 1
HISTCONTROL = ignoredups
PWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2
LS_EXECCWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #4313
CXX_VERSION = 7.2.0
PYTHON_ROOT = /home/projects/ppc64le/python/2.7.12
OMPI_CXX = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/packages/kokkos/bin/nvcc_wrapper
SUPERLU_VERSION = 4.3.0
PULLREQUESTNUM = 7384
BINARY_TYPE_HPC = 
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_clang_9.0.0 # 688 (click to expand)


Current directory: /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Sacado'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST='Sacado'
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

Build name               = PR-7384-test-Trilinos_pullrequest_clang_9.0.0-688

Cur dir                  = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2/pull_request_test

Parallel level           = 10

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel6-x86_64/sems/utility/cmake/3.12.2/bin/cmake

-C "/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2/Trilinos/cmake/std/PullRequestLinuxClang9.0.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic141&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_clang_9.0.0-688&field3=buildstamp&compare3=61&value3=20200519-1852-Pull Request-Experimental

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_clang_9.0.0-688&field2=buildstamp&compare2=61&value2=20200519-1852-Pull Request-Experimental

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_clang_9.0.0-688&field2=buildstamp&compare2=61&value2=20200519-1852-Pull Request-Experimental

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

........................... Size of output: 226K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

..................................................  Size: 149K

..................................................  Size: 199K

..................................................  Size: 249K

.......................................... Size of output: 291K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

0

JOB_COOWNERS_EMAILS = [email protected],[email protected]

SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.4.7

SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.6.6

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/clang/9.0.0/openmpi/1.10.1/parallel/lib

GIT_URL = https://github.com/trilinos/Trilinos

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/boost/1.63.0/clang/9.0.0/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.4.7

SNLSYSTEM = cee

MPIF77 = mpif77

SEMS_HDF5_ROOT = /projects/sems/install/rhel6-x86_64/sems/tpl/hdf5/1.10.6/clang/9.0.0/openmpi/1.10.1/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/scotch/6.0.3/clang/9.0.0/openmpi/1.10.1/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/5.3.0:sems-clang/9.0.0:sems-openmpi/1.10.1:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.12.2:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2@tmp

SEMS_CMAKE_VERSION = 3.12.2

HISTCONTROL = ignoredups

SERIAL_CXX = clang++

PWD = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #688

PULLREQUESTNUM = 7384

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/clang/9.0.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@2/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_python_2 # 2455 (click to expand)


HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = develop
https_proxy = http://wwwproxy.sandia.gov:80
F90 = gfortran
SERIAL_F90 = gfortran
SEMS_CMAKE_ROOT = /projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3
JOB_COOWNERS = prwolfe,trilinos
SERIAL_FC = gfortran
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 81b68670-3d20-4b6d-a84c-0b83df775523
ftp_proxy = http://wwwproxy.sandia.gov:80/
QT_GRAPHICSSYSTEM_CHECKED = 1
SEMS_NINJA_FORTRAN_LOCAL_COMPILER_VERSION = 4.8.5
F77 = gfortran
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = [email protected]
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
NODE_NAME = tr-test-4-trilinos
GIT_CHECKOUT_DIR = Trilinos
SEMS_NINJA_FORTRAN_VERSION = 1.7.2
SEMS_COMPILER_VERSION = 7.2.0
SSH_CLIENT = 205.137.81.17 57002 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-4-trilinos trilinos-32 trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_4
PATH = /projects/sierra/linux_rh7/install/Python/2.7.15/bin:/projects/sierra/linux_rh7/install/Python/extrasbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/sbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/bin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin:/projects/sems/install/rhel7-x86_64/sems/compiler/gcc/7.2.0/base/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
SEMS_NINJA_FORTRAN_LOCAL_PYTHON_VERSION = 2.7.5
GIT_PREVIOUS_SUCCESSFUL_COMMIT = da5877912f823e50821e858ebda56f98b599f7f3
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
CC = gcc
SEMS_CMAKE_LOCAL_COMPILER_VERSION = 4.8.5
JOB_OWNER_EMAIL = [email protected]
PULLREQUEST_CDASH_TRACK = Pull Request
BUILD_ID = 2455
JOB_COOWNERS_EMAILS = [email protected],[email protected]
GIT_URL = https://github.com/trilinos/Trilinos
SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-gcc/7.2.0:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2
WORKSPACE_Currently Loaded Modulefiles:
  1) sems-env                   4) sems-cmake/3.10.3
  2) sems-git/2.10.1            5) atdm-env
  3) sems-gcc/7.2.0             6) atdm-ninja_fortran/1.7.2
Build name               = PR-7384-test-Trilinos_pullrequest_python_2-2455
Cur dir                  = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/TFW_testing_single_configure_prototype
Source dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos
Binary dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/pull_request_test
Parallel level           = 20
Testing Parallel level   = 20
skip_by_parts_submit     = OFF
skip_single_submit       = ON
skip_update_step         = ON
skip_upload_config_files = OFF
skip_clean_build_dir     = ON
Subproject count         = 53
Dashboard model          = Experimental
Dashboard track          = Pull Request
Running configuration:
/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake 
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos/cmake/std/PullRequestLinuxPython2.cmake"
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/packageEnables.cmake"
  -DTrilinos_ENABLE_TESTS:BOOL=ON
  -DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2
  -G "Ninja"
  /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos
CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos
CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-4.novalocal&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_python_2-2455&field3=buildstamp&compare3=61&value3=20200519-1852-Pull Request
CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_python_2-2455&field2=buildstamp&compare2=61&value2=20200519-1852-Pull Request
CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_python_2-2455&field2=buildstamp&compare2=61&value2=20200519-1852-Pull Request
Starting configure step.
   Each . represents 1024 bytes of output
    ...................... Size of output: 21K
configure submit error = 0
Configure suceeded.
Starting build step.
   Each symbol represents 1024 bytes of output.
    . Size of output: 0K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
TMP = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2@tmp
SEMS_CMAKE_VERSION = 3.10.3
HISTCONTROL = ignoredups
SERIAL_CXX = g++
PWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #2455
PULLREQUESTNUM = 7384
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_TrilinosFrameworkTests = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_python_3 # 2466 (click to expand)


HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = develop
https_proxy = http://wwwproxy.sandia.gov:80
F90 = gfortran
SERIAL_F90 = gfortran
SEMS_CMAKE_ROOT = /projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3
JOB_COOWNERS = prwolfe,trilinos
SERIAL_FC = gfortran
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = fe5318c2-1b77-46d2-9651-0f38c22346b7
ftp_proxy = http://wwwproxy.sandia.gov:80/
QT_GRAPHICSSYSTEM_CHECKED = 1
SEMS_NINJA_FORTRAN_LOCAL_COMPILER_VERSION = 4.8.5
F77 = gfortran
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = [email protected]
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
NODE_NAME = tr-test-4-trilinos
GIT_CHECKOUT_DIR = Trilinos
SEMS_NINJA_FORTRAN_VERSION = 1.7.2
SEMS_COMPILER_VERSION = 7.2.0
SSH_CLIENT = 205.137.81.17 57002 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-4-trilinos trilinos-32 trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_4
PATH = /projects/sierra/linux_rh7/install/Python/3.6.3/bin:/projects/sierra/linux_rh7/install/Python/extrasbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/sbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/bin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin:/projects/sems/install/rhel7-x86_64/sems/compiler/gcc/7.2.0/base/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
SEMS_NINJA_FORTRAN_LOCAL_PYTHON_VERSION = 2.7.5
GIT_PREVIOUS_SUCCESSFUL_COMMIT = da5877912f823e50821e858ebda56f98b599f7f3
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
CC = gcc
SEMS_CMAKE_LOCAL_COMPILER_VERSION = 4.8.5
JOB_OWNER_EMAIL = [email protected]
PULLREQUEST_CDASH_TRACK = Pull Request
BUILD_ID = 2466
JOB_COOWNERS_EMAILS = [email protected],[email protected]
GIT_URL = https://github.com/trilinos/Trilinos
SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-gcc/7.2.0:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2
WORKSPACE_TMPCurrently Loaded Modulefiles:
  1) sems-env                   4) sems-cmake/3.10.3
  2) sems-git/2.10.1            5) atdm-env
  3) sems-gcc/7.2.0             6) atdm-ninja_fortran/1.7.2
Build name               = PR-7384-test-Trilinos_pullrequest_python_3-2466
Cur dir                  = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/TFW_testing_single_configure_prototype
Source dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos
Binary dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/pull_request_test
Parallel level           = 20
Testing Parallel level   = 20
skip_by_parts_submit     = OFF
skip_single_submit       = ON
skip_update_step         = ON
skip_upload_config_files = OFF
skip_clean_build_dir     = ON
Subproject count         = 53
Dashboard model          = Experimental
Dashboard track          = Pull Request
Running configuration:
/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake 
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos/cmake/std/PullRequestLinuxPython3.cmake"
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/packageEnables.cmake"
  -DTrilinos_ENABLE_TESTS:BOOL=ON
  -DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2
  -G "Ninja"
  /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos
CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos
CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-4.novalocal&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_python_3-2466&field3=buildstamp&compare3=61&value3=20200519-1852-Pull Request
CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_python_3-2466&field2=buildstamp&compare2=61&value2=20200519-1852-Pull Request
CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_python_3-2466&field2=buildstamp&compare2=61&value2=20200519-1852-Pull Request
Starting configure step.
   Each . represents 1024 bytes of output
    ...................... Size of output: 21K
configure submit error = 0
Configure suceeded.
Starting build step.
   Each symbol represents 1024 bytes of output.
    . Size of output: 0K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
 = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3@tmp
SEMS_CMAKE_VERSION = 3.10.3
HISTCONTROL = ignoredups
SERIAL_CXX = g++
PWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #2466
PULLREQUESTNUM = 7384
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_TrilinosFrameworkTests = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

CDash Test Results for PR# 7384.

Wiki: How to Reproduce PR Testing Builds and Errors.

trilinos-autotester · 2020-05-19T22:35:19Z

Status Flag 'Pull Request AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6741
Status: STARTED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6553
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 4978
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 4825
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1015
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4315
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 690
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2457
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2468
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Using Repos:

Repo: TRILINOS (etphipp/Trilinos)

Pull Request Author: etphipp

trilinos-autotester · 2020-05-19T23:42:59Z

Status Flag 'Pull Request AutoTester' - Jenkins Testing: 1 or more Jobs FAILED

Note: Testing will normally be attempted again in approx. 2 Hrs 30 Mins. If a change to the PR source branch occurs, the testing will be attempted again on next available autotester run.

Pull Request Auto Testing has FAILED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6741
Status: FAILED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6553
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 4978
Status: FAILED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 4825
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1015
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4315
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 690
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2457
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2468
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`d00bec0`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.8.4 # 6741 (click to expand)


Current directory: /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Sacado'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST='Sacado'
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

Build name               = PR-7384-test-Trilinos_pullrequest_gcc_4.8.4-6741

Cur dir                  = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

Binary dir               = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxGCC4.8.4TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-7.novalocal&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_gcc_4.8.4-6741&field3=buildstamp&compare3=61&value3=20200519-2233-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_4.8.4-6741&field2=buildstamp&compare2=61&value2=20200519-2233-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_4.8.4-6741&field2=buildstamp&compare2=61&value2=20200519-2233-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

.......................................... Size of output: 241K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

..................................................  Size: 150K

..................................................  Size: 199K

......................... Size of output: 224K

Error(s) when building project

CMake Warning at /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype/simple_testing.cmake:202 (message):

Build failed with error 1
build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

mp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #6741

PULLREQUESTNUM = 7384

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/superlu/4.3/gcc/4.8.4/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/TFW_testing_single_configure_prototype

Traceback (most recent call last):

File "/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 697, in 

returnValue = run()

File "/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 690, in run

'package_subproject_list.cmake'])

File "/projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib/python2.7/subprocess.py", line 540, in check_call

raise CalledProcessError(retcode, cmd)

subprocess.CalledProcessError: Command '['ctest', '-S', 'simple_testing.cmake', '-Dbuild_name=PR-7384-test-Trilinos_pullrequest_gcc_4.8.4-6741', '-Dskip_by_parts_submit=OFF', '-Dskip_update_step=ON', '-Ddashboard_model=Experimental', '-Ddashboard_track=Pull Request', '-DPARALLEL_LEVEL=20', '-DTEST_PARALLEL_LEVEL=10', '-Dbuild_dir=/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/pull_request_test', '-Dconfigure_script=/scratch/trilinos/jenkins/tr-test-7/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.8.4/Trilinos/cmake/std/PullRequestLinuxGCC4.8.4TestingSettings.cmake', '-Dpackage_enables=../packageEnables.cmake', '-Dsubprojects_file=../TFW_single_configure_support_scripts/package_subproject_list.cmake']' returned non-zero exit status 255

Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE

Console Output (last 100 lines) : Trilinos_pullrequest_intel_17.0.1 # 6553 (click to expand)


CHANGED_PACKAGES_FULL_LIST='Sacado'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST='Sacado'
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

Build name               = PR-7384-test-Trilinos_pullrequest_intel_17.0.1-6553

Cur dir                  = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel6-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos/cmake/std/PullRequestLinuxIntelTestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic158&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_intel_17.0.1-6553&field3=buildstamp&compare3=61&value3=20200519-2233-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_intel_17.0.1-6553&field2=buildstamp&compare2=61&value2=20200519-2233-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_intel_17.0.1-6553&field2=buildstamp&compare2=61&value2=20200519-2233-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

.............................................. Size of output: 245K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

..................................................  Size: 150K

..................................................  Size: 200K

..................................................  Size: 249K

..................................................  Size: 300K

..................................................  Size: 349K

..................................................  Size: 399K

..................................................  Size: 449K

..................................................  Size: 499K

..................................................  Size: 549K

.................... Size of output: 570K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

ects/sems/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/intel/17.0.1/mpich/3.2/parallel/include

MKL_LIB = /projects/sems/install/rhel6-x86_64/sems/compiler/intel/17.0.1/base/mkl/lib/intel64

MODULE_VERSION_STACK = 3.2.10

SEMS_MPICH_ROOT = /projects/sems/install/rhel6-x86_64/sems/compiler/intel/17.0.1/mpich/3.2

JOB_COOWNERS_EMAILS = [email protected],[email protected]

SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.4.7

SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.6.6

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/intel/17.0.1/mpich/3.2/parallel/lib

GIT_URL = https://github.com/trilinos/Trilinos

SEMS_INTEL_LOCAL_PYTHON_VERSION = 2.6.6

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/boost/1.63.0/intel/17.0.1/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.4.7

SNLSYSTEM = cee

MPIF77 = mpif77

SEMS_HDF5_ROOT = /projects/sems/install/rhel6-x86_64/sems/tpl/hdf5/1.10.6/intel/17.0.1/mpich/3.2/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/scotch/6.0.3/intel/17.0.1/mpich/3.2/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/4.9.3:sems-intel/17.0.1:sems-mpich/3.2:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = icpc

PWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #6553

PULLREQUESTNUM = 7384

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/intel/17.0.1/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_intel_17.0.1/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_4.9.3_SERIAL # 4978 (click to expand)


E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

Build name               = PR-7384-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-4978

Cur dir                  = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxGCC4.9.3TestingSettingsSERIAL.cmake"

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic166&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-4978&field3=buildstamp&compare3=61&value3=20200519-2233-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-4978&field2=buildstamp&compare2=61&value2=20200519-2233-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-4978&field2=buildstamp&compare2=61&value2=20200519-2233-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

................. Size of output: 166K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

..................................................  Size: 149K

..................................................  Size: 199K

..................................................  Size: 249K

..................................................  Size: 300K

..................................................  Size: 350K

..................................................  Size: 399K

..................................................  Size: 449K

..................................................  Size: 500K

..................................................  Size: 549K

..................................................  Size: 599K

...................................... Size of output: 637K

Error(s) when building project

CMake Warning at /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype/simple_testing.cmake:202 (message):

Build failed with error 1
build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

/sems/install/rhel7-x86_64/sems/tpl/netcdf/4.7.3/gcc/4.9.3/base/include

MODULE_VERSION_STACK = 3.2.10

JOB_COOWNERS_EMAILS = [email protected],[email protected]

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/netcdf/4.7.3/gcc/4.9.3/base/lib

GIT_BRANCH = origin/develop

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/boost/1.63.0/gcc/4.9.3/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5

SNLSYSTEM = cee

SEMS_HDF5_ROOT = /projects/sems/install/rhel7-x86_64/sems/tpl/hdf5/1.10.6/gcc/4.9.3/base

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/4.9.3:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/base:sems-netcdf/4.7.3/base:sems-metis/5.1.0/base:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #4978

PULLREQUESTNUM = 7384

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/superlu/4.3/gcc/4.9.3/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/TFW_testing_single_configure_prototype

Traceback (most recent call last):

File "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 697, in 

returnValue = run()

File "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxDriverTest.py", line 690, in run

'package_subproject_list.cmake'])

File "/projects/sems/install/rhel7-x86_64/sems/compiler/python/2.7.9/lib/python2.7/subprocess.py", line 540, in check_call

raise CalledProcessError(retcode, cmd)

subprocess.CalledProcessError: Command '['ctest', '-S', 'simple_testing.cmake', '-Dbuild_name=PR-7384-test-Trilinos_pullrequest_gcc_4.9.3_SERIAL-4978', '-Dskip_by_parts_submit=OFF', '-Dskip_update_step=ON', '-Ddashboard_model=Experimental', '-Ddashboard_track=Pull Request', '-DPARALLEL_LEVEL=20', '-DTEST_PARALLEL_LEVEL=10', '-Dbuild_dir=/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/pull_request_test', '-Dconfigure_script=/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_4.9.3_SERIAL/Trilinos/cmake/std/PullRequestLinuxGCC4.9.3TestingSettingsSERIAL.cmake', '-Dpackage_enables=../packageEnables.cmake', '-Dsubprojects_file=../TFW_single_configure_support_scripts/package_subproject_list.cmake']' returned non-zero exit status 255

Build step 'Execute shell' marked build as failure

Archiving artifacts

Finished: FAILURE

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_7.2.0 # 4825 (click to expand)


*** git commit origin/develop to HEAD
***
TRILINOS_DIR=/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/commonTools/framework/../..

TRILINOS_SCRIPTS_DIR=/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/commonTools/framework/../..

TRIBITS_DIR=/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/commonTools/framework/../../cmake/tribits
A) Generate the Trilinos Packages definition and depencencies XML file
Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Sacado'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST='Sacado'
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

Build name               = PR-7384-test-Trilinos_pullrequest_gcc_7.2.0-4825

Cur dir                  = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/pull_request_test

Parallel level           = 13

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel6-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos/cmake/std/PullRequestLinuxGCC7.2.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic158&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_gcc_7.2.0-4825&field3=buildstamp&compare3=61&value3=20200519-2234-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_7.2.0-4825&field2=buildstamp&compare2=61&value2=20200519-2234-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_7.2.0-4825&field2=buildstamp&compare2=61&value2=20200519-2234-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

.......................... Size of output: 225K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

......................................... Size of output: 140K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

/1.10.6/gcc/7.2.0/openmpi/1.10.1/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/scotch/6.0.3/gcc/7.2.0/openmpi/1.10.1/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/7.2.0:sems-openmpi/1.10.1:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #4825

PULLREQUESTNUM = 7384

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/gcc/7.2.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/ascic158/workspace/trilinos-folder/Trilinos_pullrequest_gcc_7.2.0/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_gcc_8.3.0 # 1015 (click to expand)


Wrote the file 'TrilinosPackageDependencies.xml'
B) Get the set of changed files
Current directory: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos
git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Sacado'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST='Sacado'
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

Build name               = PR-7384-test-Trilinos_pullrequest_gcc_8.3.0-1015

Cur dir                  = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/pull_request_test

Parallel level           = 20

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos/cmake/std/PullRequestLinuxGCC8.3.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic166&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_gcc_8.3.0-1015&field3=buildstamp&compare3=61&value3=20200519-2234-Pull Request

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_8.3.0-1015&field2=buildstamp&compare2=61&value2=20200519-2234-Pull Request

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_gcc_8.3.0-1015&field2=buildstamp&compare2=61&value2=20200519-2234-Pull Request

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

.......................... Size of output: 225K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

......................................... Size of output: 140K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

[email protected],[email protected]

SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.8.5

SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.7.5

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/netcdf/4.7.3/gcc/8.3.0/openmpi/1.10.1/parallel/lib

GIT_BRANCH = origin/develop

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/boost/1.66.0/gcc/8.3.0/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5

SNLSYSTEM = cee

MPIF77 = mpif77

SEMS_HDF5_ROOT = /projects/sems/install/rhel7-x86_64/sems/tpl/hdf5/1.10.6/gcc/8.3.0/openmpi/1.10.1/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/scotch/6.0.3/gcc/8.3.0/openmpi/1.10.1/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/8.3.0:sems-openmpi/1.10.1:sems-boost/1.66.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0@tmp

SEMS_CMAKE_VERSION = 3.10.3

HISTCONTROL = ignoredups

SERIAL_CXX = g++

PWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #1015

PULLREQUESTNUM = 7384

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel7-x86_64/sems/tpl/superlu/4.3/gcc/8.3.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/ascic166/workspace/trilinos-folder/Trilinos_pullrequest_gcc_8.3.0/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_cuda_9.2 # 4315 (click to expand)


    ..................................................  Size: 1799K
    ..................................................  Size: 1849K
    ..................................................  Size: 1899K
    ..................................................  Size: 1949K
    ..................................................  Size: 2000K
    ..................................................  Size: 2050K
    ..................................................  Size: 2099K
    ..................................................  Size: 2150K
    ..................................................  Size: 2199K
    ..................................................  Size: 2249K
    ..................................................  Size: 2300K
    ..................................................  Size: 2350K
    ........................ Size of output: 2373K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
10 ride10 ride10 ride10 ride10
METIS_ROOT = /home/projects/ppc64le-pwr8/metis/5.0.1/gcc/7.2.0
NODE_OWNER_EMAIL = [email protected]
LSB_EXIT_PRE_ABORT = 99
TRILINOS_SOURCE_REPO = https://github.com/etphipp/Trilinos
PARMETIS_HOME = /home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
FC_VERSION = 7.2.0
LSB_JOBFILENAME = /ascldap/users/trilinos/.lsbatch/1589927690.4086
BLAS_ROOT = /home/projects/ppc64le-pwr8/netlib/3.8.0/gcc/7.2.0
GIT_CHECKOUT_DIR = Trilinos
LSB_AFFINITY_HOSTFILE = /ascldap/users/trilinos/.lsbatch/1589927690.4086.hostAffinityFile
PARMETIS_ROOT = /home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
LSF_ENVDIR = /opt/lsf/conf
MPI_VENDOR = openmpi
PYTHON = /home/projects/ppc64le/python/2.7.12/bin/python
CXX_VENDOR = gcc
HDF5_ROOT = /home/projects/ppc64le-pwr8-nvidia/hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
HOSTTYPE = LINUXPPC64LE
SSH_CLIENT = 205.137.81.17 44298 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
LSF_LIM_API_NTRIES = 1
PATH = /ascldap/users/rabartl/install/white-ride/cmake-3.11.2/bin:/ascldap/users/rabartl/install/white-ride/ninja-1.8.2/bin:/home/projects/ppc64le/valgrind/3.12.0/bin:/home/projects/ppc64le/cmake/3.9.6/bin:/home/projects/ppc64le-pwr8-nvidia/parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8/metis/5.0.1/gcc/7.2.0/bin:/home/projects/ppc64le-pwr8-nvidia/netcdf/4.6.1/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/pnetcdf-exo/1.9.0/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin:/home/projects/ppc64le/java/ibm/sdk/8.0.0/bin:/home/projects/ppc64le/papi/5.5.1/bin:/home/projects/ppc64le/gcc/7.2.0/bin:/home/projects/ppc64le/binutils/2.30.0/bin:/home/projects/ppc64le-pwr8-nvidia/cuda/9.2.88/bin:/home/projects/ppc64le/python/2.7.12/bin:/home/projects/ppc64le/git/2.10.1/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/bin:/opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/etc:/usr/local/bin:/usr/bin:/opt/ibutils/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
LSB_QUEUE = rhel7F
LSF_JOB_TIMESTAMP_VALUE = 1589927691
LSB_EXEC_HOSTTYPE = LINUXPPC64LE
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 6f57bc0ad90232eee540a81c40f4b85562089c55
LSB_DJOB_HOSTFILE = /ascldap/users/trilinos/.lsbatch/1589927690.4086.hostfile
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
LSF_LIBDIR = /opt/lsf/10.1/linux3.10-glibc2.17-ppc64le/lib
CGNS_VERSION = 20180521
LSB_SUB_USER = trilinos
NODE_LABELS = ride-trilinos trilinos-ride
GIT_BRANCH_2 = origin/pull_request_changes
GIT_CHECKOUT_DIR_1 = TFW_single_configure_support_scripts
GIT_CHECKOUT_DIR_2 = TFW_testing_single_configure_prototype
JOB_OWNER_EMAIL = [email protected]
PULLREQUEST_CDASH_TRACK = Pull Request
BUILD_ID = 4315
SBD_KRB5CCNAME_VAL = 
LSB_RES_GET_FANOUT_INFO = Y
RUN_DISPLAY_URL = https://ascic-jenkins.sandia.gov/job/trilinos-folder/job/Trilinos_pullrequest_cuda_9.2/4315/display/redirect
JOB_COOWNERS_EMAILS = [email protected],[email protected]
LSB_BATCH_JID = 4086
MPI_HOME = /home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
SUPERLU_HOME = /home/projects/ppc64le-pwr8/superlu/4.3.0/gcc/7.2.0
F77_VENDOR = gcc
KRB5CCNAME = FILE:/tmp/krb5cc_91724_bqNHm8maFh
BINUTILS_VERSION = 2.30.0
GIT_BRANCH = origin/develop
CMAKE_ROOT = /home/projects/ppc64le/cmake/3.9.6
BOOST_ROOT = /home/projects/ppc64le-pwr8/boost/1.65.1/gcc/7.2.0
VALGRIND_ROOT = /home/projects/ppc64le/valgrind/3.12.0
MPIF77 = /home/projects/ppc64le-pwr8-nvidia/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88/bin/mpif77
PARMETIS_VERSION = 4.0.3
LSB_JOBNAME = trilinos-folder/Trilinos_pullrequest_cuda_9.2
LOADEDMODULES = git/2.10.1:python/2.7.12:cuda/9.2.88:binutils/2.30.0:gcc/7.2.0:papi/5.5.1:java/ibm/sdk/8.0.0:openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:pnetcdf-exo/1.9.0/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:zlib/1.2.8:hdf5/1.8.20/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:netcdf/4.6.1/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:cgns/20180521/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:netlib/3.8.0/gcc/7.2.0:superlu/4.3.0/gcc/7.2.0:boost/1.65.1/gcc/7.2.0:metis/5.0.1/gcc/7.2.0:parmetis/4.0.3/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88:cmake/3.9.6:valgrind/3.12.0:devpack/20180521/openmpi/2.1.2/gcc/7.2.0/cuda/9.2.88
WORKSPACE_TMP = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2@tmp
GIT_BRANCH_1 = origin/master
CUDA_MANAGED_FORCE_DEVICE_ALLOC = 1
HISTCONTROL = ignoredups
PWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2
LS_EXECCWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #4315
CXX_VERSION = 7.2.0
PYTHON_ROOT = /home/projects/ppc64le/python/2.7.12
OMPI_CXX = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/Trilinos/packages/kokkos/bin/nvcc_wrapper
SUPERLU_VERSION = 4.3.0
PULLREQUESTNUM = 7384
BINARY_TYPE_HPC = 
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /home/trilinos/jenkins/ride/workspace/trilinos-folder/Trilinos_pullrequest_cuda_9.2/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_clang_9.0.0 # 690 (click to expand)


git diff --name-only origin/develop..HEAD > /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/changed-files.txt
Wrote file 'changed-files.txt'
Current directory: /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0
C) Get the unfiltered list of changed Trilinos packages (including 'ALL_PACKAGES')
CHANGED_PACKAGES_FULL_LIST='Sacado'
D) Filter list of changed packages to get only the PT packages
CHANGED_PACKAGES_PT_LIST='Sacado'
E) Generate the *.cmake enables file
Wrote file 'packageEnables.cmake'

Build name               = PR-7384-test-Trilinos_pullrequest_clang_9.0.0-690

Cur dir                  = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/TFW_testing_single_configure_prototype

Source dir               = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos

Binary dir               = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/pull_request_test

Parallel level           = 10

Testing Parallel level   = 10

skip_by_parts_submit     = OFF

skip_single_submit       = ON

skip_update_step         = ON

skip_upload_config_files = OFF

skip_clean_build_dir     = ON

Subproject count         = 53

Dashboard model          = Experimental

Dashboard track          = Pull Request

Running configuration:

/projects/sems/install/rhel6-x86_64/sems/utility/cmake/3.12.2/bin/cmake

-C "/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos/cmake/std/PullRequestLinuxClang9.0.0TestingSettings.cmake"

-C "/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/packageEnables.cmake"

-DTrilinos_ENABLE_TESTS:BOOL=ON

-DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2

-G "Ninja"

/scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/Trilinos

CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos

CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=ascic141&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_clang_9.0.0-690&field3=buildstamp&compare3=61&value3=20200519-2235-Pull Request-Experimental

CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_clang_9.0.0-690&field2=buildstamp&compare2=61&value2=20200519-2235-Pull Request-Experimental

CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_clang_9.0.0-690&field2=buildstamp&compare2=61&value2=20200519-2235-Pull Request-Experimental

Starting configure step.

Each . represents 1024 bytes of output

..................................................  Size: 50K

..................................................  Size: 100K

..................................................  Size: 150K

..................................................  Size: 200K

........................... Size of output: 226K

configure submit error = 0

Configure suceeded.

Starting build step.

Each symbol represents 1024 bytes of output.

..................................................  Size: 49K

..................................................  Size: 99K

..................................................  Size: 149K

..................................................  Size: 199K

..................................................  Size: 249K

..................................................  Size: 299K

..................................................  Size: 349K

..................................................  Size: 399K

............................. Size of output: 428K

Build succeeded.

build submit error = 0

Starting testing step.

Tests succeeded.

test submit error = 0

File upload submit error = 0

OWNERS_EMAILS = [email protected],[email protected]

SEMS_PARMETIS_LOCAL_COMPILER_VERSION = 4.4.7

SEMS_PARMETIS_LOCAL_PYTHON_VERSION = 2.6.6

SEMS_NETCDF_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/netcdf/4.7.3/clang/9.0.0/openmpi/1.10.1/parallel/lib

GIT_URL = https://github.com/trilinos/Trilinos

SEMS_BOOST_LIBRARY_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/boost/1.63.0/clang/9.0.0/base/lib

SEMS_GCC_LOCAL_COMPILER_VERSION = 4.4.7

SNLSYSTEM = cee

MPIF77 = mpif77

SEMS_HDF5_ROOT = /projects/sems/install/rhel6-x86_64/sems/tpl/hdf5/1.10.6/clang/9.0.0/openmpi/1.10.1/parallel

SEMS_SCOTCH_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/scotch/6.0.3/clang/9.0.0/openmpi/1.10.1/nopthread_64bit_parallel/include

LOADEDMODULES = sems-env:sems-git/2.10.1:sems-python/2.7.9:sems-gcc/5.3.0:sems-clang/9.0.0:sems-openmpi/1.10.1:sems-boost/1.63.0/base:sems-zlib/1.2.8/base:sems-hdf5/1.10.6/parallel:sems-netcdf/4.7.3/parallel:sems-parmetis/4.0.3/parallel:sems-scotch/6.0.3/nopthread_64bit_parallel:sems-superlu/4.3/base:sems-cmake/3.12.2:atdm-env:atdm-ninja_fortran/1.7.2

WORKSPACE_TMP = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0@tmp

SEMS_CMAKE_VERSION = 3.12.2

HISTCONTROL = ignoredups

SERIAL_CXX = clang++

PWD = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0

JENKINS_SERVER_COOKIE = 248910a9cd8de38c

BUILD_DISPLAY_NAME = #690

PULLREQUESTNUM = 7384

SEMS_SUPERLU_INCLUDE_PATH = /projects/sems/install/rhel6-x86_64/sems/tpl/superlu/4.3/clang/9.0.0/base/include
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_Sacado = ON
Set CWD = /scratch/trilinos/jenkins/ascic141/workspace/trilinos-folder/Trilinos_pullrequest_clang_9.0.0/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_python_2 # 2457 (click to expand)


HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = develop
https_proxy = http://wwwproxy.sandia.gov:80
F90 = gfortran
SERIAL_F90 = gfortran
SEMS_CMAKE_ROOT = /projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3
JOB_COOWNERS = prwolfe,trilinos
SERIAL_FC = gfortran
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 6d9839e8-41a8-4d1e-9a46-2b40cd2a39ed
ftp_proxy = http://wwwproxy.sandia.gov:80/
QT_GRAPHICSSYSTEM_CHECKED = 1
SEMS_NINJA_FORTRAN_LOCAL_COMPILER_VERSION = 4.8.5
F77 = gfortran
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = [email protected]
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
NODE_NAME = tr-test-4-trilinos
GIT_CHECKOUT_DIR = Trilinos
SEMS_NINJA_FORTRAN_VERSION = 1.7.2
SEMS_COMPILER_VERSION = 7.2.0
SSH_CLIENT = 205.137.81.17 57002 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-4-trilinos trilinos-32 trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_4
PATH = /projects/sierra/linux_rh7/install/Python/2.7.15/bin:/projects/sierra/linux_rh7/install/Python/extrasbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/sbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/bin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin:/projects/sems/install/rhel7-x86_64/sems/compiler/gcc/7.2.0/base/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
SEMS_NINJA_FORTRAN_LOCAL_PYTHON_VERSION = 2.7.5
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 6f57bc0ad90232eee540a81c40f4b85562089c55
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
CC = gcc
SEMS_CMAKE_LOCAL_COMPILER_VERSION = 4.8.5
JOB_OWNER_EMAIL = [email protected]
PULLREQUEST_CDASH_TRACK = Pull Request
BUILD_ID = 2457
JOB_COOWNERS_EMAILS = [email protected],[email protected]
GIT_URL = https://github.com/trilinos/Trilinos
SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-gcc/7.2.0:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2
WORKSPACE_TCurrently Loaded Modulefiles:
  1) sems-env                   4) sems-cmake/3.10.3
  2) sems-git/2.10.1            5) atdm-env
  3) sems-gcc/7.2.0             6) atdm-ninja_fortran/1.7.2
Build name               = PR-7384-test-Trilinos_pullrequest_python_2-2457
Cur dir                  = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/TFW_testing_single_configure_prototype
Source dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos
Binary dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/pull_request_test
Parallel level           = 20
Testing Parallel level   = 20
skip_by_parts_submit     = OFF
skip_single_submit       = ON
skip_update_step         = ON
skip_upload_config_files = OFF
skip_clean_build_dir     = ON
Subproject count         = 53
Dashboard model          = Experimental
Dashboard track          = Pull Request
Running configuration:
/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake 
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos/cmake/std/PullRequestLinuxPython2.cmake"
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/packageEnables.cmake"
  -DTrilinos_ENABLE_TESTS:BOOL=ON
  -DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2
  -G "Ninja"
  /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/Trilinos
CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos
CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-4.novalocal&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_python_2-2457&field3=buildstamp&compare3=61&value3=20200519-2252-Pull Request
CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_python_2-2457&field2=buildstamp&compare2=61&value2=20200519-2252-Pull Request
CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_python_2-2457&field2=buildstamp&compare2=61&value2=20200519-2252-Pull Request
Starting configure step.
   Each . represents 1024 bytes of output
    ...................... Size of output: 21K
configure submit error = 0
Configure suceeded.
Starting build step.
   Each symbol represents 1024 bytes of output.
    . Size of output: 0K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
MP = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2@tmp
SEMS_CMAKE_VERSION = 3.10.3
HISTCONTROL = ignoredups
SERIAL_CXX = g++
PWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #2457
PULLREQUESTNUM = 7384
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_TrilinosFrameworkTests = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_2/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

Console Output (last 100 lines) : Trilinos_pullrequest_python_3 # 2468 (click to expand)


HUDSON_HOME = /var/lib/jenkins
TRILINOS_TARGET_BRANCH = develop
https_proxy = http://wwwproxy.sandia.gov:80
F90 = gfortran
SERIAL_F90 = gfortran
SEMS_CMAKE_ROOT = /projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3
JOB_COOWNERS = prwolfe,trilinos
SERIAL_FC = gfortran
BUILD_CAUSE_MANUALTRIGGER = true
HUDSON_COOKIE = 3c8a3887-b4e9-4df3-abc8-fe0502c7b8ff
ftp_proxy = http://wwwproxy.sandia.gov:80/
QT_GRAPHICSSYSTEM_CHECKED = 1
SEMS_NINJA_FORTRAN_LOCAL_COMPILER_VERSION = 4.8.5
F77 = gfortran
TRILINOS_TARGET_REPO = https://github.com/trilinos/Trilinos
NODE_OWNER_EMAIL = [email protected]
SEMS_GIT_LOCAL_PYTHON_VERSION = 2.7.5
NODE_NAME = tr-test-4-trilinos
GIT_CHECKOUT_DIR = Trilinos
SEMS_NINJA_FORTRAN_VERSION = 1.7.2
SEMS_COMPILER_VERSION = 7.2.0
SSH_CLIENT = 205.137.81.17 57002 22
JENKINS_URL = https://ascic-jenkins.sandia.gov/
LOGNAME = trilinos
NODE_LABELS = tr-test-4-trilinos trilinos-32 trilinos-any trilinos-cloud-32 trilinos_cloud_32_node_4
PATH = /projects/sierra/linux_rh7/install/Python/3.6.3/bin:/projects/sierra/linux_rh7/install/Python/extrasbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/sbin:/projects/sems/install/rhel7-x86_64/atdm/utility/ninja_fortran/1.7.2/bin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin:/projects/sems/install/rhel7-x86_64/sems/compiler/gcc/7.2.0/base/bin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/sbin:/projects/sems/install/rhel7-x86_64/sems/utility/git/2.10.1/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/ascldap/users/trilinos/.local/bin:/ascldap/users/trilinos/bin
SEMS_NINJA_FORTRAN_LOCAL_PYTHON_VERSION = 2.7.5
GIT_PREVIOUS_SUCCESSFUL_COMMIT = 6f57bc0ad90232eee540a81c40f4b85562089c55
no_proxy = localhost,localnets,127.0.0.1,169.254.0.0/16,forge.sandia.gov
CC = gcc
SEMS_CMAKE_LOCAL_COMPILER_VERSION = 4.8.5
JOB_OWNER_EMAIL = [email protected]
PULLREQUEST_CDASH_TRACK = Pull Request
BUILD_ID = 2468
JOB_COOWNERS_EMAILS = [email protected],[email protected]
GIT_URL = https://github.com/trilinos/Trilinos
SEMS_GCC_LOCAL_COMPILER_VERSION = 4.8.5
LOADEDMODULES = sems-env:sems-git/2.10.1:sems-gcc/7.2.0:sems-cmake/3.10.3:atdm-env:atdm-ninja_fortran/1.7.2
WORKSPACE_TMCurrently Loaded Modulefiles:
  1) sems-env                   4) sems-cmake/3.10.3
  2) sems-git/2.10.1            5) atdm-env
  3) sems-gcc/7.2.0             6) atdm-ninja_fortran/1.7.2
Build name               = PR-7384-test-Trilinos_pullrequest_python_3-2468
Cur dir                  = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/TFW_testing_single_configure_prototype
Source dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos
Binary dir               = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/pull_request_test
Parallel level           = 20
Testing Parallel level   = 20
skip_by_parts_submit     = OFF
skip_single_submit       = ON
skip_update_step         = ON
skip_upload_config_files = OFF
skip_clean_build_dir     = ON
Subproject count         = 53
Dashboard model          = Experimental
Dashboard track          = Pull Request
Running configuration:
/projects/sems/install/rhel7-x86_64/sems/utility/cmake/3.10.3/bin/cmake 
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos/cmake/std/PullRequestLinuxPython3.cmake"
  -C "/scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/packageEnables.cmake"
  -DTrilinos_ENABLE_TESTS:BOOL=ON
  -DTrilinos_PARALLEL_LINK_JOBS_LIMIT:STRING=2
  -G "Ninja"
  /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/Trilinos
CTEST_DROP_LOCATION = /cdash/submit.php?project=Trilinos
CDash URL1 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=3&showfilters=1&filtercombine=and&field1=site&compare1=61&value1=tr-test-4.novalocal&field2=buildname&compare2=61&value2=PR-7384-test-Trilinos_pullrequest_python_3-2468&field3=buildstamp&compare3=61&value3=20200519-2252-Pull Request
CDash URL2 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&display=project&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_python_3-2468&field2=buildstamp&compare2=61&value2=20200519-2252-Pull Request
CDash URL3 = https://testing.sandia.gov/cdash/index.php?project=Trilinos&filtercount=2&showfilters=0&filtercombine=and&field1=buildname&compare1=61&value1=PR-7384-test-Trilinos_pullrequest_python_3-2468&field2=buildstamp&compare2=61&value2=20200519-2252-Pull Request
Starting configure step.
   Each . represents 1024 bytes of output
    ...................... Size of output: 21K
configure submit error = 0
Configure suceeded.
Starting build step.
   Each symbol represents 1024 bytes of output.
    . Size of output: 0K
Build succeeded.
build submit error = 0
Starting testing step.
Tests succeeded.
test submit error = 0
File upload submit error = 0
P = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3@tmp
SEMS_CMAKE_VERSION = 3.10.3
HISTCONTROL = ignoredups
SERIAL_CXX = g++
PWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3
JENKINS_SERVER_COOKIE = 248910a9cd8de38c
BUILD_DISPLAY_NAME = #2468
PULLREQUESTNUM = 7384
==========================================================================================

None

PULLREQUEST_CDASH_TRACK is set. Setting CDASH_TRACK=Pull Request

Enabled packages:

-- Setting Trilinos_ENABLE_TrilinosFrameworkTests = ON
Set CWD = /scratch/trilinos/jenkins/tr-test-4/workspace/trilinos-folder/Trilinos_pullrequest_python_3/TFW_testing_single_configure_prototype

Archiving artifacts

Finished: SUCCESS

CDash Test Results for PR# 7384.

Wiki: How to Reproduce PR Testing Builds and Errors.

…gain! Also fix some unused typedef warnings.

trilinos-autotester · 2020-05-20T21:13:36Z

Status Flag 'Pre-Test Inspection' - Auto Inspected - Inspection Is Not Necessary for this Pull Request.

trilinos-autotester · 2020-05-20T21:16:05Z

Status Flag 'Pull Request AutoTester' - Testing Jenkins Projects:

Pull Request Auto Testing STARTING (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6751
Status: STARTED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6563
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 4988
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 4835
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1025
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4325
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 700
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2465
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2476
Status: STARTED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Using Repos:

Repo: TRILINOS (etphipp/Trilinos)

Pull Request Author: etphipp

trilinos-autotester · 2020-05-20T23:05:17Z

Status Flag 'Pull Request AutoTester' - Jenkins Testing: all Jobs PASSED

Pull Request Auto Testing has PASSED (click to expand)

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Build Num: 6751
Status: PASSED

Jenkins Parameters

Parameter Name	Value
COMPILER_MODULE	sems-gcc/4.8.4
JENKINS_BUILD_TYPE	Release
JENKINS_COMM_TYPE	MPI
JENKINS_DO_COMPLEX	OFF
JENKINS_JOB_TYPE	Experimental
MPI_MODULE	sems-openmpi/1.8.7
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Build Num: 6563
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Build Num: 4988
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Build Num: 4835
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Build Num: 1025
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Build Num: 4325
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Build Num: 700
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_2

Build Num: 2465
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

Build Information

Test Name: Trilinos_pullrequest_python_3

Build Num: 2476
Status: PASSED

Jenkins Parameters

Parameter Name	Value
PULLREQUESTNUM	7384
TEST_REPO_ALIAS	TRILINOS
TRILINOS_SOURCE_BRANCH	sacado_hier_perf
TRILINOS_SOURCE_REPO	https://github.com/etphipp/Trilinos
TRILINOS_SOURCE_SHA	`5d606fe`
TRILINOS_TARGET_BRANCH	develop
TRILINOS_TARGET_REPO	https://github.com/trilinos/Trilinos
TRILINOS_TARGET_SHA	`c664636`

CDash Test Results for PR# 7384.

trilinos-autotester · 2020-05-20T23:05:35Z

Status Flag 'Pre-Merge Inspection' - SUCCESS: The last commit to this Pull Request has been INSPECTED AND APPROVED by [ rppawlo ]!

trilinos-autotester · 2020-05-20T23:05:42Z

Status Flag 'Pull Request AutoTester' - Pull Request will be Automerged

trilinos-autotester · 2020-05-20T23:05:45Z

Merge on Pull Request# 7384: IS A SUCCESS - Pull Request successfully merged

etphipp added 2 commits May 15, 2020 13:46

Sacado: Fix performance bug with hierarchical-dfad enabled.

fd33141

Direct writes between view's had a performance bug when hierarchical-dfad was enabled where the correct thread striding wasn't being used. This fixes that.

etphipp added the AT: AUTOMERGE Causes the PR autotester to automatically merge the PR branch once approvals are completed label May 15, 2020

etphipp requested a review from rppawlo May 15, 2020 19:54

etphipp self-assigned this May 15, 2020

rppawlo previously approved these changes May 15, 2020

View reviewed changes

rppawlo added the AT: RETEST Causes the PR autotester to run a new round of PR tests on the next iteration label May 19, 2020

trilinos-autotester removed the AT: RETEST Causes the PR autotester to run a new round of PR tests on the next iteration label May 19, 2020

Sacado: The dreaded "const-lambda-capture" gcc compiler bug strikes a…

5d606fe

…gain! Also fix some unused typedef warnings.

etphipp dismissed rppawlo’s stale review via 5d606fe May 20, 2020 20:42

rppawlo approved these changes May 20, 2020

View reviewed changes

trilinos-autotester merged commit 1aaaa05 into trilinos:develop May 20, 2020

trilinos-autotester removed the AT: AUTOMERGE Causes the PR autotester to automatically merge the PR branch once approvals are completed label May 20, 2020

etphipp deleted the sacado_hier_perf branch May 21, 2020 18:30

Sacado: Rework hieararchical performance tests #7384

Sacado: Rework hieararchical performance tests #7384

Conversation

etphipp commented May 15, 2020

trilinos-autotester commented May 15, 2020

trilinos-autotester commented May 15, 2020

trilinos-autotester commented May 15, 2020

trilinos-autotester commented May 19, 2020

trilinos-autotester commented May 19, 2020

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_python_2

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_python_3

Jenkins Parameters

Using Repos:

trilinos-autotester commented May 19, 2020

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_cuda_9.2

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_clang_9.0.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_python_2

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_python_3

Jenkins Parameters

trilinos-autotester commented May 19, 2020

Build Information

Test Name: Trilinos_pullrequest_gcc_4.8.4

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_intel_17.0.1

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_4.9.3_SERIAL

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_7.2.0

Jenkins Parameters

Build Information

Test Name: Trilinos_pullrequest_gcc_8.3.0